Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI PM: make the PM core more careful with drivers using the new PM framework
  PCI PM: Read power state from device after trying to change it on resume
  PCI PM: Do not disable and enable bridges during suspend-resume
  PCI: PCIe portdrv: Simplify suspend and resume
  PCI PM: Fix saving of device state in pci_legacy_suspend
  PCI PM: Check if the state has been saved before trying to restore it
  PCI PM: Fix handling of devices without drivers
  PCI: return error on failure to read PCI ROMs
  PCI: properly clean up ASPM link state on device remove
This commit is contained in:
Linus Torvalds 2009-02-07 10:46:30 -08:00
commit e83102cab0
10 changed files with 133 additions and 88 deletions

View File

@ -9,6 +9,7 @@ that support it. For example, a given bus might look like this:
| |-- class
| |-- config
| |-- device
| |-- enable
| |-- irq
| |-- local_cpus
| |-- resource
@ -32,6 +33,7 @@ files, each with their own function.
class PCI class (ascii, ro)
config PCI config space (binary, rw)
device PCI device (ascii, ro)
enable Whether the device is enabled (ascii, rw)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
@ -57,10 +59,19 @@ used to do actual device programming from userspace. Note that some platforms
don't support mmapping of certain resources, so be sure to check the return
value from any attempted mmap.
The 'enable' file provides a counter that indicates how many times the device
has been enabled. If the 'enable' file currently returns '4', and a '1' is
echoed into it, it will then return '5'. Echoing a '0' into it will decrease
the count. Even when it returns to 0, though, some of the initialisation
may not be reversed.
The 'rom' file is special in that it provides read-only access to the device's
ROM file, if available. It's disabled by default, however, so applications
should write the string "1" to the file to enable it before attempting a read
call, and disable it following the access by writing "0" to the file.
call, and disable it following the access by writing "0" to the file. Note
that the device must be enabled for a rom read to return data succesfully.
In the event a driver is not bound to the device, it can be enabled using the
'enable' file, documented above.
Accessing legacy resources through sysfs
----------------------------------------

View File

@ -443,7 +443,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
size = pci_resource_len(dev, PCI_ROM_RESOURCE);
addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
size);
image_size = pci_get_rom_size(addr, size);
image_size = pci_get_rom_size(dev, addr, size);
dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
dev->resource[PCI_ROM_RESOURCE].end =
(unsigned long) addr + image_size - 1;

View File

@ -269,7 +269,7 @@ sn_io_slot_fixup(struct pci_dev *dev)
rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
size + 1);
image_size = pci_get_rom_size(rom, size + 1);
image_size = pci_get_rom_size(dev, rom, size + 1);
dev->resource[PCI_ROM_RESOURCE].end =
dev->resource[PCI_ROM_RESOURCE].start +
image_size - 1;

View File

@ -355,6 +355,8 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
int i = 0;
if (drv && drv->suspend) {
pci_power_t prev = pci_dev->current_state;
pci_dev->state_saved = false;
i = drv->suspend(pci_dev, state);
@ -365,12 +367,16 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state)
if (pci_dev->state_saved)
goto Fixup;
if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0))
if (pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
"PCI PM: Device state not saved by %pF\n",
drv->suspend);
goto Fixup;
}
}
pci_save_state(pci_dev);
pci_dev->state_saved = true;
/*
* This is for compatibility with existing code with legacy PM support.
*/
@ -424,35 +430,20 @@ static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev)
pci_fixup_device(pci_fixup_resume_early, pci_dev);
}
static int pci_pm_default_resume(struct pci_dev *pci_dev)
static void pci_pm_default_resume(struct pci_dev *pci_dev)
{
pci_fixup_device(pci_fixup_resume, pci_dev);
if (!pci_is_bridge(pci_dev))
pci_enable_wake(pci_dev, PCI_D0, false);
return pci_pm_reenable_device(pci_dev);
}
static void pci_pm_default_suspend_generic(struct pci_dev *pci_dev)
{
/* If device is enabled at this point, disable it */
pci_disable_enabled_device(pci_dev);
/*
* Save state with interrupts enabled, because in principle the bus the
* device is on may be put into a low power state after this code runs.
*/
pci_save_state(pci_dev);
}
static void pci_pm_default_suspend(struct pci_dev *pci_dev)
{
pci_pm_default_suspend_generic(pci_dev);
/* Disable non-bridge devices without PM support */
if (!pci_is_bridge(pci_dev))
pci_prepare_to_sleep(pci_dev);
pci_fixup_device(pci_fixup_suspend, pci_dev);
pci_disable_enabled_device(pci_dev);
pci_save_state(pci_dev);
}
static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev)
@ -497,21 +488,49 @@ static void pci_pm_complete(struct device *dev)
static int pci_pm_suspend(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
int error = 0;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend(dev, PMSG_SUSPEND);
if (drv && drv->pm && drv->pm->suspend) {
error = drv->pm->suspend(dev);
suspend_report_result(drv->pm->suspend, error);
if (!pm) {
pci_pm_default_suspend(pci_dev);
goto Fixup;
}
if (!error)
pci_pm_default_suspend(pci_dev);
pci_dev->state_saved = false;
return error;
if (pm->suspend) {
pci_power_t prev = pci_dev->current_state;
int error;
error = pm->suspend(dev);
suspend_report_result(pm->suspend, error);
if (error)
return error;
if (pci_dev->state_saved)
goto Fixup;
if (pci_dev->current_state != PCI_D0
&& pci_dev->current_state != PCI_UNKNOWN) {
WARN_ONCE(pci_dev->current_state != prev,
"PCI PM: State of device not saved by %pF\n",
pm->suspend);
goto Fixup;
}
}
if (!pci_dev->state_saved) {
pci_save_state(pci_dev);
if (!pci_is_bridge(pci_dev))
pci_prepare_to_sleep(pci_dev);
}
Fixup:
pci_fixup_device(pci_fixup_suspend, pci_dev);
return 0;
}
static int pci_pm_suspend_noirq(struct device *dev)
@ -554,7 +573,7 @@ static int pci_pm_resume_noirq(struct device *dev)
static int pci_pm_resume(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
/*
@ -567,12 +586,16 @@ static int pci_pm_resume(struct device *dev)
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume(dev);
error = pci_pm_default_resume(pci_dev);
pci_pm_default_resume(pci_dev);
if (!error && drv && drv->pm && drv->pm->resume)
error = drv->pm->resume(dev);
if (pm) {
if (pm->resume)
error = pm->resume(dev);
} else {
pci_pm_reenable_device(pci_dev);
}
return error;
return 0;
}
#else /* !CONFIG_SUSPEND */
@ -589,21 +612,31 @@ static int pci_pm_resume(struct device *dev)
static int pci_pm_freeze(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
int error = 0;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend(dev, PMSG_FREEZE);
if (drv && drv->pm && drv->pm->freeze) {
error = drv->pm->freeze(dev);
suspend_report_result(drv->pm->freeze, error);
if (!pm) {
pci_pm_default_suspend(pci_dev);
return 0;
}
if (!error)
pci_pm_default_suspend_generic(pci_dev);
pci_dev->state_saved = false;
return error;
if (pm->freeze) {
int error;
error = pm->freeze(dev);
suspend_report_result(pm->freeze, error);
if (error)
return error;
}
if (!pci_dev->state_saved)
pci_save_state(pci_dev);
return 0;
}
static int pci_pm_freeze_noirq(struct device *dev)
@ -646,16 +679,18 @@ static int pci_pm_thaw_noirq(struct device *dev)
static int pci_pm_thaw(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume(dev);
pci_pm_reenable_device(pci_dev);
if (drv && drv->pm && drv->pm->thaw)
error = drv->pm->thaw(dev);
if (pm) {
if (pm->thaw)
error = pm->thaw(dev);
} else {
pci_pm_reenable_device(pci_dev);
}
return error;
}
@ -663,22 +698,29 @@ static int pci_pm_thaw(struct device *dev)
static int pci_pm_poweroff(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_suspend(dev, PMSG_HIBERNATE);
if (!drv || !drv->pm)
return 0;
if (drv->pm->poweroff) {
error = drv->pm->poweroff(dev);
suspend_report_result(drv->pm->poweroff, error);
if (!pm) {
pci_pm_default_suspend(pci_dev);
goto Fixup;
}
if (!error)
pci_pm_default_suspend(pci_dev);
pci_dev->state_saved = false;
if (pm->poweroff) {
error = pm->poweroff(dev);
suspend_report_result(pm->poweroff, error);
}
if (!pci_dev->state_saved && !pci_is_bridge(pci_dev))
pci_prepare_to_sleep(pci_dev);
Fixup:
pci_fixup_device(pci_fixup_suspend, pci_dev);
return error;
}
@ -719,7 +761,7 @@ static int pci_pm_restore_noirq(struct device *dev)
static int pci_pm_restore(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct device_driver *drv = dev->driver;
struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int error = 0;
/*
@ -732,10 +774,14 @@ static int pci_pm_restore(struct device *dev)
if (pci_has_legacy_pm_support(pci_dev))
return pci_legacy_resume(dev);
error = pci_pm_default_resume(pci_dev);
pci_pm_default_resume(pci_dev);
if (!error && drv && drv->pm && drv->pm->restore)
error = drv->pm->restore(dev);
if (pm) {
if (pm->restore)
error = pm->restore(dev);
} else {
pci_pm_reenable_device(pci_dev);
}
return error;
}

View File

@ -768,8 +768,8 @@ pci_read_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
return -EINVAL;
rom = pci_map_rom(pdev, &size); /* size starts out as PCI window size */
if (!rom)
return 0;
if (!rom || !size)
return -EIO;
if (off >= size)
count = 0;

View File

@ -1418,10 +1418,10 @@ int pci_restore_standard_config(struct pci_dev *dev)
break;
}
dev->current_state = PCI_D0;
pci_update_current_state(dev, PCI_D0);
Restore:
return pci_restore_state(dev);
return dev->state_saved ? pci_restore_state(dev) : 0;
}
/**

View File

@ -718,9 +718,9 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
/*
* All PCIe functions are in one slot, remove one function will remove
* the the whole slot, so just wait
* the whole slot, so just wait until we are the last function left.
*/
if (!list_empty(&parent->subordinate->devices))
if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices))
goto out;
/* All functions are removed, so just disable ASPM for the link */

View File

@ -55,25 +55,13 @@ static int pcie_portdrv_suspend(struct pci_dev *dev, pm_message_t state)
}
static int pcie_portdrv_suspend_late(struct pci_dev *dev, pm_message_t state)
{
return pci_save_state(dev);
}
static int pcie_portdrv_resume_early(struct pci_dev *dev)
{
return pci_restore_state(dev);
}
static int pcie_portdrv_resume(struct pci_dev *dev)
{
pcie_portdrv_restore_config(dev);
pci_set_master(dev);
return pcie_port_device_resume(dev);
}
#else
#define pcie_portdrv_suspend NULL
#define pcie_portdrv_suspend_late NULL
#define pcie_portdrv_resume_early NULL
#define pcie_portdrv_resume NULL
#endif
@ -292,8 +280,6 @@ static struct pci_driver pcie_portdriver = {
.remove = pcie_portdrv_remove,
.suspend = pcie_portdrv_suspend,
.suspend_late = pcie_portdrv_suspend_late,
.resume_early = pcie_portdrv_resume_early,
.resume = pcie_portdrv_resume,
.err_handler = &pcie_portdrv_err_handler,

View File

@ -63,7 +63,7 @@ void pci_disable_rom(struct pci_dev *pdev)
* The PCI window size could be much larger than the
* actual image size.
*/
size_t pci_get_rom_size(void __iomem *rom, size_t size)
size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size)
{
void __iomem *image;
int last_image;
@ -72,8 +72,10 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size)
do {
void __iomem *pds;
/* Standard PCI ROMs start out with these bytes 55 AA */
if (readb(image) != 0x55)
if (readb(image) != 0x55) {
dev_err(&pdev->dev, "Invalid ROM contents\n");
break;
}
if (readb(image + 1) != 0xAA)
break;
/* get the PCI data structure and check its signature */
@ -159,7 +161,7 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
* size is much larger than the actual size of the ROM.
* True size is important if the ROM is going to be copied.
*/
*size = pci_get_rom_size(rom, *size);
*size = pci_get_rom_size(pdev, rom, *size);
return rom;
}

View File

@ -684,7 +684,7 @@ int pci_enable_rom(struct pci_dev *pdev);
void pci_disable_rom(struct pci_dev *pdev);
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
size_t pci_get_rom_size(void __iomem *rom, size_t size);
size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size);
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);