thermal: exynos: remove unused struct exynos_tmu_registers entries

Remove unused / write-only entries from struct exynos_tmu_registers.
Then remove unused defines while at it.

We don't keep the unused/untested features in the kernel just
in case that some future hardware might need it.  Such code has
a real maintainance cost (all other code changes have to take
the dead code into account) and usually makes future changes
more difficult, not easier (i.e. recent additions of Exynos5420
SoC and Exynos5260 SoC thermal support has not made use of any
of the driver's currently unused/untested features, moreover
the recently added code is more complex than needed because of
the existing dead code).  Also all removed dead code is still
accessible in the kernel git repository and can be easily
brought back if/when needed.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2014-07-31 19:10:59 +02:00 committed by Eduardo Valentin
parent cac7f24298
commit e841971628
3 changed files with 0 additions and 72 deletions

View File

@ -85,8 +85,6 @@ enum soc_type {
* @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
* @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
* @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
reg.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
@ -101,27 +99,13 @@ enum soc_type {
register.
* @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
register.
* @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
tmu_ctrl register.
* @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
* @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
* @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
* @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
* @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
* @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
* @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
* @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
* @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
* @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
* @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
* @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
@ -130,9 +114,6 @@ enum soc_type {
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
* @inten_fall1_shift: shift bits of falling 1 interrupt bits.
* @inten_fall2_shift: shift bits of falling 2 interrupt bits.
* @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
* @intclr_fall_shift: shift bits for interrupt clear fall 0
@ -142,7 +123,6 @@ enum soc_type {
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
* @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
@ -153,7 +133,6 @@ struct exynos_tmu_registers {
u32 triminfo_ctrl;
u32 triminfo_ctrl1;
u32 triminfo_reload_shift;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
@ -166,32 +145,17 @@ struct exynos_tmu_registers {
u32 buf_slope_sel_mask;
u32 calib_mode_shift;
u32 calib_mode_mask;
u32 therm_trip_tq_en_shift;
u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
u32 threshold_th0_l0_shift;
u32 threshold_th0_l1_shift;
u32 threshold_th0_l2_shift;
u32 threshold_th0_l3_shift;
u32 threshold_th1;
u32 threshold_th1_l0_shift;
u32 threshold_th1_l1_shift;
u32 threshold_th1_l2_shift;
u32 threshold_th1_l3_shift;
u32 threshold_th2;
u32 threshold_th2_l0_shift;
u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
@ -200,9 +164,6 @@ struct exynos_tmu_registers {
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
u32 inten_fall1_shift;
u32 inten_fall2_shift;
u32 inten_fall3_shift;
u32 tmu_intstat;
@ -215,7 +176,6 @@ struct exynos_tmu_registers {
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;

View File

@ -123,7 +123,6 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
@ -185,7 +184,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
.triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
@ -215,7 +213,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
@ -317,7 +314,6 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.emul_con = EXYNOS5260_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5260_TMU_DATA \
@ -409,7 +405,6 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5420_TMU_DATA \

View File

@ -42,20 +42,8 @@
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
/* Exynos5250 and Exynos4412 specific registers */
#define EXYNOS_TMU_TRIMINFO_CON 0x14
@ -63,14 +51,11 @@
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
#define EXYNOS_TMU_RISE_INT_MASK 0x111
#define EXYNOS_TMU_RISE_INT_SHIFT 0
#define EXYNOS_TMU_FALL_INT_MASK 0x111
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
@ -85,9 +70,6 @@
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
@ -122,13 +104,11 @@
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
#define EXYNOS5440_TMU_TEMP 0x008
#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
@ -138,13 +118,6 @@
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8