MIPS: Yeeloong 2F: Add basic EC operations
YeeLoong2F has a KB3310b embedded controller. Add basic operations for future related drivers and board support. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Wu Zhangjin
Ralf Baechle
parent
599a89459f
commit
ec614d80b5
|
|
@ -2,7 +2,7 @@
|
|||
# Makefile for lemote loongson2f family machines
|
||||
#
|
||||
|
||||
obj-y += irq.o reset.o
|
||||
obj-y += irq.o reset.o ec_kb3310b.o
|
||||
|
||||
#
|
||||
# Suspend Support
|
||||
|
|
|
|||
|
|
@ -0,0 +1,130 @@
|
|||
/*
|
||||
* Basic KB3310B Embedded Controller support for the YeeLoong 2F netbook
|
||||
*
|
||||
* Copyright (C) 2008 Lemote Inc.
|
||||
* Author: liujl <liujl@lemote.com>, 2008-04-20
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include "ec_kb3310b.h"
|
||||
|
||||
static DEFINE_SPINLOCK(index_access_lock);
|
||||
static DEFINE_SPINLOCK(port_access_lock);
|
||||
|
||||
unsigned char ec_read(unsigned short addr)
|
||||
{
|
||||
unsigned char value;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&index_access_lock, flags);
|
||||
outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
|
||||
outb((addr & 0x00ff), EC_IO_PORT_LOW);
|
||||
value = inb(EC_IO_PORT_DATA);
|
||||
spin_unlock_irqrestore(&index_access_lock, flags);
|
||||
|
||||
return value;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ec_read);
|
||||
|
||||
void ec_write(unsigned short addr, unsigned char val)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&index_access_lock, flags);
|
||||
outb((addr & 0xff00) >> 8, EC_IO_PORT_HIGH);
|
||||
outb((addr & 0x00ff), EC_IO_PORT_LOW);
|
||||
outb(val, EC_IO_PORT_DATA);
|
||||
/* flush the write action */
|
||||
inb(EC_IO_PORT_DATA);
|
||||
spin_unlock_irqrestore(&index_access_lock, flags);
|
||||
|
||||
return;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ec_write);
|
||||
|
||||
/*
|
||||
* This function is used for EC command writes and corresponding status queries.
|
||||
*/
|
||||
int ec_query_seq(unsigned char cmd)
|
||||
{
|
||||
int timeout;
|
||||
unsigned char status;
|
||||
unsigned long flags;
|
||||
int ret = 0;
|
||||
|
||||
spin_lock_irqsave(&port_access_lock, flags);
|
||||
|
||||
/* make chip goto reset mode */
|
||||
udelay(EC_REG_DELAY);
|
||||
outb(cmd, EC_CMD_PORT);
|
||||
udelay(EC_REG_DELAY);
|
||||
|
||||
/* check if the command is received by ec */
|
||||
timeout = EC_CMD_TIMEOUT;
|
||||
status = inb(EC_STS_PORT);
|
||||
while (timeout-- && (status & (1 << 1))) {
|
||||
status = inb(EC_STS_PORT);
|
||||
udelay(EC_REG_DELAY);
|
||||
}
|
||||
|
||||
if (timeout <= 0) {
|
||||
printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
|
||||
ret = -EINVAL;
|
||||
} else
|
||||
printk(KERN_INFO
|
||||
"(%x/%d)ec issued command %d status : 0x%x\n",
|
||||
timeout, EC_CMD_TIMEOUT - timeout, cmd, status);
|
||||
|
||||
spin_unlock_irqrestore(&port_access_lock, flags);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ec_query_seq);
|
||||
|
||||
/*
|
||||
* Send query command to EC to get the proper event number
|
||||
*/
|
||||
int ec_query_event_num(void)
|
||||
{
|
||||
return ec_query_seq(CMD_GET_EVENT_NUM);
|
||||
}
|
||||
EXPORT_SYMBOL(ec_query_event_num);
|
||||
|
||||
/*
|
||||
* Get event number from EC
|
||||
*
|
||||
* NOTE: This routine must follow the query_event_num function in the
|
||||
* interrupt.
|
||||
*/
|
||||
int ec_get_event_num(void)
|
||||
{
|
||||
int timeout = 100;
|
||||
unsigned char value;
|
||||
unsigned char status;
|
||||
|
||||
udelay(EC_REG_DELAY);
|
||||
status = inb(EC_STS_PORT);
|
||||
udelay(EC_REG_DELAY);
|
||||
while (timeout-- && !(status & (1 << 0))) {
|
||||
status = inb(EC_STS_PORT);
|
||||
udelay(EC_REG_DELAY);
|
||||
}
|
||||
if (timeout <= 0) {
|
||||
pr_info("%s: get event number timeout.\n", __func__);
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
value = inb(EC_DAT_PORT);
|
||||
udelay(EC_REG_DELAY);
|
||||
|
||||
return value;
|
||||
}
|
||||
EXPORT_SYMBOL(ec_get_event_num);
|
||||
|
|
@ -0,0 +1,188 @@
|
|||
/*
|
||||
* KB3310B Embedded Controller
|
||||
*
|
||||
* Copyright (C) 2008 Lemote Inc.
|
||||
* Author: liujl <liujl@lemote.com>, 2008-03-14
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef _EC_KB3310B_H
|
||||
#define _EC_KB3310B_H
|
||||
|
||||
extern unsigned char ec_read(unsigned short addr);
|
||||
extern void ec_write(unsigned short addr, unsigned char val);
|
||||
extern int ec_query_seq(unsigned char cmd);
|
||||
extern int ec_query_event_num(void);
|
||||
extern int ec_get_event_num(void);
|
||||
|
||||
typedef int (*sci_handler) (int status);
|
||||
extern sci_handler yeeloong_report_lid_status;
|
||||
|
||||
#define SCI_IRQ_NUM 0x0A
|
||||
|
||||
/*
|
||||
* The following registers are determined by the EC index configuration.
|
||||
* 1, fill the PORT_HIGH as EC register high part.
|
||||
* 2, fill the PORT_LOW as EC register low part.
|
||||
* 3, fill the PORT_DATA as EC register write data or get the data from it.
|
||||
*/
|
||||
#define EC_IO_PORT_HIGH 0x0381
|
||||
#define EC_IO_PORT_LOW 0x0382
|
||||
#define EC_IO_PORT_DATA 0x0383
|
||||
|
||||
/*
|
||||
* EC delay time is 500us for register and status access
|
||||
*/
|
||||
#define EC_REG_DELAY 500 /* unit : us */
|
||||
#define EC_CMD_TIMEOUT 0x1000
|
||||
|
||||
/*
|
||||
* EC access port for SCI communication
|
||||
*/
|
||||
#define EC_CMD_PORT 0x66
|
||||
#define EC_STS_PORT 0x66
|
||||
#define EC_DAT_PORT 0x62
|
||||
#define CMD_INIT_IDLE_MODE 0xdd
|
||||
#define CMD_EXIT_IDLE_MODE 0xdf
|
||||
#define CMD_INIT_RESET_MODE 0xd8
|
||||
#define CMD_REBOOT_SYSTEM 0x8c
|
||||
#define CMD_GET_EVENT_NUM 0x84
|
||||
#define CMD_PROGRAM_PIECE 0xda
|
||||
|
||||
/* temperature & fan registers */
|
||||
#define REG_TEMPERATURE_VALUE 0xF458
|
||||
#define REG_FAN_AUTO_MAN_SWITCH 0xF459
|
||||
#define BIT_FAN_AUTO 0
|
||||
#define BIT_FAN_MANUAL 1
|
||||
#define REG_FAN_CONTROL 0xF4D2
|
||||
#define BIT_FAN_CONTROL_ON (1 << 0)
|
||||
#define BIT_FAN_CONTROL_OFF (0 << 0)
|
||||
#define REG_FAN_STATUS 0xF4DA
|
||||
#define BIT_FAN_STATUS_ON (1 << 0)
|
||||
#define BIT_FAN_STATUS_OFF (0 << 0)
|
||||
#define REG_FAN_SPEED_HIGH 0xFE22
|
||||
#define REG_FAN_SPEED_LOW 0xFE23
|
||||
#define REG_FAN_SPEED_LEVEL 0xF4CC
|
||||
/* fan speed divider */
|
||||
#define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/
|
||||
|
||||
/* battery registers */
|
||||
#define REG_BAT_DESIGN_CAP_HIGH 0xF77D
|
||||
#define REG_BAT_DESIGN_CAP_LOW 0xF77E
|
||||
#define REG_BAT_FULLCHG_CAP_HIGH 0xF780
|
||||
#define REG_BAT_FULLCHG_CAP_LOW 0xF781
|
||||
#define REG_BAT_DESIGN_VOL_HIGH 0xF782
|
||||
#define REG_BAT_DESIGN_VOL_LOW 0xF783
|
||||
#define REG_BAT_CURRENT_HIGH 0xF784
|
||||
#define REG_BAT_CURRENT_LOW 0xF785
|
||||
#define REG_BAT_VOLTAGE_HIGH 0xF786
|
||||
#define REG_BAT_VOLTAGE_LOW 0xF787
|
||||
#define REG_BAT_TEMPERATURE_HIGH 0xF788
|
||||
#define REG_BAT_TEMPERATURE_LOW 0xF789
|
||||
#define REG_BAT_RELATIVE_CAP_HIGH 0xF492
|
||||
#define REG_BAT_RELATIVE_CAP_LOW 0xF493
|
||||
#define REG_BAT_VENDOR 0xF4C4
|
||||
#define FLAG_BAT_VENDOR_SANYO 0x01
|
||||
#define FLAG_BAT_VENDOR_SIMPLO 0x02
|
||||
#define REG_BAT_CELL_COUNT 0xF4C6
|
||||
#define FLAG_BAT_CELL_3S1P 0x03
|
||||
#define FLAG_BAT_CELL_3S2P 0x06
|
||||
#define REG_BAT_CHARGE 0xF4A2
|
||||
#define FLAG_BAT_CHARGE_DISCHARGE 0x01
|
||||
#define FLAG_BAT_CHARGE_CHARGE 0x02
|
||||
#define FLAG_BAT_CHARGE_ACPOWER 0x00
|
||||
#define REG_BAT_STATUS 0xF4B0
|
||||
#define BIT_BAT_STATUS_LOW (1 << 5)
|
||||
#define BIT_BAT_STATUS_DESTROY (1 << 2)
|
||||
#define BIT_BAT_STATUS_FULL (1 << 1)
|
||||
#define BIT_BAT_STATUS_IN (1 << 0)
|
||||
#define REG_BAT_CHARGE_STATUS 0xF4B1
|
||||
#define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2)
|
||||
#define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1)
|
||||
#define REG_BAT_STATE 0xF482
|
||||
#define BIT_BAT_STATE_CHARGING (1 << 1)
|
||||
#define BIT_BAT_STATE_DISCHARGING (1 << 0)
|
||||
#define REG_BAT_POWER 0xF440
|
||||
#define BIT_BAT_POWER_S3 (1 << 2)
|
||||
#define BIT_BAT_POWER_ON (1 << 1)
|
||||
#define BIT_BAT_POWER_ACIN (1 << 0)
|
||||
|
||||
/* other registers */
|
||||
/* Audio: rd/wr */
|
||||
#define REG_AUDIO_VOLUME 0xF46C
|
||||
#define REG_AUDIO_MUTE 0xF4E7
|
||||
#define REG_AUDIO_BEEP 0xF4D0
|
||||
/* USB port power or not: rd/wr */
|
||||
#define REG_USB0_FLAG 0xF461
|
||||
#define REG_USB1_FLAG 0xF462
|
||||
#define REG_USB2_FLAG 0xF463
|
||||
#define BIT_USB_FLAG_ON 1
|
||||
#define BIT_USB_FLAG_OFF 0
|
||||
/* LID */
|
||||
#define REG_LID_DETECT 0xF4BD
|
||||
#define BIT_LID_DETECT_ON 1
|
||||
#define BIT_LID_DETECT_OFF 0
|
||||
/* CRT */
|
||||
#define REG_CRT_DETECT 0xF4AD
|
||||
#define BIT_CRT_DETECT_PLUG 1
|
||||
#define BIT_CRT_DETECT_UNPLUG 0
|
||||
/* LCD backlight brightness adjust: 9 levels */
|
||||
#define REG_DISPLAY_BRIGHTNESS 0xF4F5
|
||||
/* Black screen Status */
|
||||
#define BIT_DISPLAY_LCD_ON 1
|
||||
#define BIT_DISPLAY_LCD_OFF 0
|
||||
/* LCD backlight control: off/restore */
|
||||
#define REG_BACKLIGHT_CTRL 0xF7BD
|
||||
#define BIT_BACKLIGHT_ON 1
|
||||
#define BIT_BACKLIGHT_OFF 0
|
||||
/* Reset the machine auto-clear: rd/wr */
|
||||
#define REG_RESET 0xF4EC
|
||||
#define BIT_RESET_ON 1
|
||||
/* Light the led: rd/wr */
|
||||
#define REG_LED 0xF4C8
|
||||
#define BIT_LED_RED_POWER (1 << 0)
|
||||
#define BIT_LED_ORANGE_POWER (1 << 1)
|
||||
#define BIT_LED_GREEN_CHARGE (1 << 2)
|
||||
#define BIT_LED_RED_CHARGE (1 << 3)
|
||||
#define BIT_LED_NUMLOCK (1 << 4)
|
||||
/* Test led mode, all led on/off */
|
||||
#define REG_LED_TEST 0xF4C2
|
||||
#define BIT_LED_TEST_IN 1
|
||||
#define BIT_LED_TEST_OUT 0
|
||||
/* Camera on/off */
|
||||
#define REG_CAMERA_STATUS 0xF46A
|
||||
#define BIT_CAMERA_STATUS_ON 1
|
||||
#define BIT_CAMERA_STATUS_OFF 0
|
||||
#define REG_CAMERA_CONTROL 0xF7B7
|
||||
#define BIT_CAMERA_CONTROL_OFF 0
|
||||
#define BIT_CAMERA_CONTROL_ON 1
|
||||
/* Wlan Status */
|
||||
#define REG_WLAN 0xF4FA
|
||||
#define BIT_WLAN_ON 1
|
||||
#define BIT_WLAN_OFF 0
|
||||
#define REG_DISPLAY_LCD 0xF79F
|
||||
|
||||
/* SCI Event Number from EC */
|
||||
enum {
|
||||
EVENT_LID = 0x23, /* LID open/close */
|
||||
EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */
|
||||
EVENT_SLEEP, /* Fn+F1 for entering sleep mode */
|
||||
EVENT_OVERTEMP, /* Over-temperature happened */
|
||||
EVENT_CRT_DETECT, /* CRT is connected */
|
||||
EVENT_CAMERA, /* Camera on/off */
|
||||
EVENT_USB_OC2, /* USB2 Over Current occurred */
|
||||
EVENT_USB_OC0, /* USB0 Over Current occurred */
|
||||
EVENT_BLACK_SCREEN, /* Turn on/off backlight */
|
||||
EVENT_AUDIO_MUTE, /* Mute on/off */
|
||||
EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
|
||||
EVENT_AC_BAT, /* AC & Battery relative issue */
|
||||
EVENT_AUDIO_VOLUME, /* Volume adjust */
|
||||
EVENT_WLAN, /* Wlan on/off */
|
||||
EVENT_END
|
||||
};
|
||||
|
||||
#endif /* !_EC_KB3310B_H */
|
||||
Loading…
Reference in New Issue