OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

OMAP specific fbdev changes for 3.12: 

* Change the OMAP board files to use the new OMAP display drivers
 * Remove all the old drivers, and the related auxiliary code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKCBzAAoJEPo9qoy8lh71yy4QAIONKG1wqN93oGqhWlcSHWIe
 Lg9YIqYk7FDfroTVunGtm0nImJmJ9yEVkxAXBRJbVb5gwvlWhpUIrhc6OahksXP8
 rVxuwb+U9LdwWkskamv0UsstvIMMSPgtsuvAKeBaBz9jm0Yu+TbrZvnCv0AyKlKE
 IscOlDycG9ENbUrhIzu9utPNlvE03hqqgn8RVYvjoj4hQ8BmOBSOGGfuofbITJAS
 8wY4nAoRwU+rV3dWQgNAvFyQ/dvsnZ4nYNLJhnf6eaB9HzpfdtFUrOF/rAlJU8nG
 RrMt5oykQT9a6VKxNryoFqih2q+FPrXBARVDvGWxn6w+q2RHrw5eteGcemegzTga
 OSGyhLpGbT/5cvbQtfaHX/Rcrdy9CNj1FMy6Y/xMvkHeqiy+0Eo6l+Nh70cvHzrx
 b+vonkSornngymt6QSXyQwXkP1PbO9ZEsZbeK+wjrqrRKL5KRvQ/HGz3uYv7CiMX
 A6Q51RHDCDoelVAn9JORIEDQukh3R78XNwPbrjdRB1pNE3Z51rmSpolKsQbmPF9m
 073p4wQ91qOji4eIdxPhuN7NuAexs42iAIZNQnZ2gMFWWSwHLlNinaY2Uu+Fs2it
 wLyKabqvi1AeFHcARzYDuHzVPrRb+6exHokud6998M9zEvFAGCoKFcsxoEvvL5/u
 gwRjFHmMzz4caPVct0UU
 =Hj7U
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP specific fbdev changes from Tomi Valkeinen:
 "I've got this pull request separate from the main fbdev pull request,
  as this contains a bunch of OMAP board file changes and thus could
  possibly be rejected in case of bad conflicts.

  The removal of the old display drivers depend on the board file
  changes, so Tony Lindgren suggested taking them together via fbdev
  tree.  These are in linux-next, and also Tony didn't see any conflicts
  with any of the branches he had, so they should go in clean.

   - Change the OMAP board files to use the new OMAP display drivers

   - Remove all the old drivers, and the related auxiliary code"

* tag 'fbdev-3.12-omap-legacy-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: rename omap_dss_device's 'device' field to 'dst'
  OMAPDSS: rename omap_dss_device's 'output' to 'src'
  OMAPDSS: DSS: remove legacy dss bus support
  OMAPDSS: RFBI: remove code related to old panel model
  OMAPDSS: VENC: remove code related to old panel model
  OMAPDSS: SDI: remove code related to old panel model
  OMAPDSS: DSI: remove code related to old panel model
  OMAPDSS: HDMI: remove code related to old panel model
  OMAPDSS: DPI: remove code related to old panel model
  OMAPDSS: remove all old panel drivers
  OMAPDSS: DPI: change regulator handling
  OMAPDSS: SDI: change regulator handling
  OMAPDSS: fix DPI and SDI device ids
  OMAPDSS: remove omap_dss_device->channel field
  OMAPDSS: RFBI: Mark RFBI as broken
  ARM: OMAP2+: Remove old display drivers from omap2plus_defconfig
  ARM: OMAP: AM3517EVM: use new display drivers
  ARM: OMAP: Zoom: use new display drivers
  ARM: OMAP: Pandora: use new display drivers
  ARM: OMAP: OMAP3EVM: use new display drivers
  ...
This commit is contained in:
Linus Torvalds 2013-09-05 09:44:03 -07:00
parent 7c049d0869 9560dc1059
commit eced5a0a5a
53 changed files with 985 additions and 8882 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/configs/omap2plus_defconfig
View File

@ -186,13 +186,11 @@ CONFIG_OMAP2_DSS_RFBI=y
CONFIG_OMAP2_DSS_SDI=y
CONFIG_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2=m
CONFIG_PANEL_GENERIC_DPI=m
CONFIG_PANEL_TFP410=m
CONFIG_PANEL_SHARP_LS037V7DW01=m
CONFIG_PANEL_NEC_NL8048HL11_01B=m
CONFIG_PANEL_TAAL=m
CONFIG_PANEL_TPO_TD043MTEA1=m
CONFIG_PANEL_ACX565AKM=m
CONFIG_DISPLAY_ENCODER_TFP410=m
CONFIG_DISPLAY_ENCODER_TPD12S015=m
CONFIG_DISPLAY_CONNECTOR_DVI=m
CONFIG_DISPLAY_CONNECTOR_HDMI=m
CONFIG_DISPLAY_PANEL_DPI=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y

57
arch/arm/mach-omap2/board-2430sdp.c
View File

@ -100,39 +100,52 @@ static struct platform_device sdp2430_flash_device = {
.resource = &sdp2430_flash_resource,
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
};
/* LCD */
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
static struct panel_generic_dpi_data sdp2430_panel_data = {
.name = "nec_nl2432dr22-11b",
.num_gpios = 2,
.gpios = {
SDP2430_LCD_PANEL_ENABLE_GPIO,
SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
},
static const struct display_timing sdp2430_lcd_videomode = {
.pixelclock = { 0, 5400000, 0 },
.hactive = { 0, 240, 0 },
.hfront_porch = { 0, 3, 0 },
.hback_porch = { 0, 39, 0 },
.hsync_len = { 0, 3, 0 },
.vactive = { 0, 320, 0 },
.vfront_porch = { 0, 2, 0 },
.vback_porch = { 0, 7, 0 },
.vsync_len = { 0, 1, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct omap_dss_device sdp2430_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &sdp2430_panel_data,
static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.display_timing = &sdp2430_lcd_videomode,
.enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO,
.backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
};
static struct omap_dss_device *sdp2430_dss_devices[] = {
&sdp2430_lcd_device,
static struct platform_device sdp2430_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &sdp2430_lcd_pdata,
};
static struct omap_dss_board_info sdp2430_dss_data = {
.num_devices = ARRAY_SIZE(sdp2430_dss_devices),
.devices = sdp2430_dss_devices,
.default_device = &sdp2430_lcd_device,
.default_display_name = "lcd",
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
&sdp2430_lcd_device,
};
#if IS_ENABLED(CONFIG_SMC91X)

83
arch/arm/mach-omap2/board-3430sdp.c
View File

@ -126,53 +126,65 @@ static void __init sdp3430_display_init(void)
}
static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
.ini_gpio = -1,
.mo_gpio = -1,
.lr_gpio = -1,
.ud_gpio = -1,
static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
.ini_gpio = -1,
.mo_gpio = -1,
.lr_gpio = -1,
.ud_gpio = -1,
};
static struct omap_dss_device sdp3430_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &sdp3430_lcd_data,
static struct platform_device sdp3430_lcd_device = {
.name = "panel-sharp-ls037v7dw01",
.id = 0,
.dev.platform_data = &sdp3430_lcd_pdata,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = -1,
static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = -1,
};
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct platform_device sdp3430_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &sdp3430_dvi_connector_pdata,
};
static struct omap_dss_device sdp3430_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = -1,
};
static struct platform_device sdp3430_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &sdp3430_tfp410_pdata,
};
static struct omap_dss_device *sdp3430_dss_devices[] = {
&sdp3430_lcd_device,
&sdp3430_dvi_device,
&sdp3430_tv_device,
static struct connector_atv_platform_data sdp3430_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct platform_device sdp3430_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &sdp3430_tv_pdata,
};
static struct omap_dss_board_info sdp3430_dss_data = {
.num_devices = ARRAY_SIZE(sdp3430_dss_devices),
.devices = sdp3430_dss_devices,
.default_device = &sdp3430_lcd_device,
.default_display_name = "lcd",
};
static struct omap2_hsmmc_info mmc[] = {
@ -583,6 +595,11 @@ static void __init omap_3430sdp_init(void)
omap_hsmmc_init(mmc);
omap3430_i2c_init();
omap_display_init(&sdp3430_dss_data);
platform_device_register(&sdp3430_lcd_device);
platform_device_register(&sdp3430_tfp410_device);
platform_device_register(&sdp3430_dvi_connector_device);
platform_device_register(&sdp3430_tv_connector_device);
if (omap_rev() > OMAP3430_REV_ES1_0)
gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
else

113
arch/arm/mach-omap2/board-am3517evm.c
View File

@ -120,56 +120,95 @@ static int __init am3517_evm_i2c_init(void)
return 0;
}
static struct panel_generic_dpi_data lcd_panel = {
.name = "sharp_lq",
.num_gpios = 3,
.gpios = {
LCD_PANEL_PWR,
LCD_PANEL_BKLIGHT_PWR,
LCD_PANEL_PWM,
},
static const struct display_timing am3517_evm_lcd_videomode = {
.pixelclock = { 0, 9000000, 0 },
.hactive = { 0, 480, 0 },
.hfront_porch = { 0, 3, 0 },
.hback_porch = { 0, 2, 0 },
.hsync_len = { 0, 42, 0 },
.vactive = { 0, 272, 0 },
.vfront_porch = { 0, 3, 0 },
.vback_porch = { 0, 2, 0 },
.vsync_len = { 0, 11, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_LOW | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct omap_dss_device am3517_evm_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 16,
static struct panel_dpi_platform_data am3517_evm_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.display_timing = &am3517_evm_lcd_videomode,
.enable_gpio = LCD_PANEL_PWR,
.backlight_gpio = LCD_PANEL_BKLIGHT_PWR,
};
static struct omap_dss_device am3517_evm_tv_device = {
.type = OMAP_DISPLAY_TYPE_VENC,
.name = "tv",
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
static struct platform_device am3517_evm_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &am3517_evm_lcd_pdata,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = -1,
static struct connector_dvi_platform_data am3517_evm_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = -1,
};
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct platform_device am3517_evm_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &am3517_evm_dvi_connector_pdata,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
&am3517_evm_lcd_device,
&am3517_evm_tv_device,
&am3517_evm_dvi_device,
static struct encoder_tfp410_platform_data am3517_evm_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = -1,
};
static struct platform_device am3517_evm_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &am3517_evm_tfp410_pdata,
};
static struct connector_atv_platform_data am3517_evm_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct platform_device am3517_evm_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &am3517_evm_tv_pdata,
};
static struct omap_dss_board_info am3517_evm_dss_data = {
.num_devices = ARRAY_SIZE(am3517_evm_dss_devices),
.devices = am3517_evm_dss_devices,
.default_device = &am3517_evm_lcd_device,
.default_display_name = "lcd",
};
static void __init am3517_evm_display_init(void)
{
gpio_request_one(LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd panel pwm");
omap_display_init(&am3517_evm_dss_data);
platform_device_register(&am3517_evm_tfp410_device);
platform_device_register(&am3517_evm_dvi_connector_device);
platform_device_register(&am3517_evm_lcd_device);
platform_device_register(&am3517_evm_tv_connector_device);
}
/*
* Board initialization
*/
@ -295,7 +334,9 @@ static void __init am3517_evm_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();
omap_display_init(&am3517_evm_dss_data);
am3517_evm_display_init();
omap_serial_init();
omap_sdrc_init(NULL, NULL);

100
arch/arm/mach-omap2/board-cm-t35.c
View File

@ -190,52 +190,81 @@ static inline void cm_t35_init_nand(void) {}
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
.num_gpios = 1,
.gpios = {
CM_T35_LCD_BL_GPIO,
},
static const struct display_timing cm_t35_lcd_videomode = {
.pixelclock = { 0, 26000000, 0 },
.hactive = { 0, 480, 0 },
.hfront_porch = { 0, 104, 0 },
.hback_porch = { 0, 8, 0 },
.hsync_len = { 0, 8, 0 },
.vactive = { 0, 640, 0 },
.vfront_porch = { 0, 4, 0 },
.vback_porch = { 0, 2, 0 },
.vsync_len = { 0, 2, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE,
};
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 18,
static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 18,
.display_timing = &cm_t35_lcd_videomode,
.enable_gpio = -1,
.backlight_gpio = CM_T35_LCD_BL_GPIO,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = CM_T35_DVI_EN_GPIO,
.i2c_bus_num = -1,
static struct platform_device cm_t35_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &cm_t35_lcd_pdata,
};
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = -1,
};
static struct omap_dss_device cm_t35_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
static struct platform_device cm_t35_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &cm_t35_dvi_connector_pdata,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
&cm_t35_lcd_device,
&cm_t35_dvi_device,
&cm_t35_tv_device,
static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = CM_T35_DVI_EN_GPIO,
};
static struct platform_device cm_t35_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &cm_t35_tfp410_pdata,
};
static struct connector_atv_platform_data cm_t35_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct platform_device cm_t35_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &cm_t35_tv_pdata,
};
static struct omap_dss_board_info cm_t35_dss_data = {
.num_devices = ARRAY_SIZE(cm_t35_dss_devices),
.devices = cm_t35_dss_devices,
.default_device = &cm_t35_dvi_device,
.default_display_name = "dvi",
};
static struct omap2_mcspi_device_config tdo24m_mcspi_config = {
@ -280,6 +309,11 @@ static void __init cm_t35_init_display(void)
pr_err("CM-T35: failed to register DSS device\n");
gpio_free(CM_T35_LCD_EN_GPIO);
}
platform_device_register(&cm_t35_tfp410_device);
platform_device_register(&cm_t35_dvi_connector_device);
platform_device_register(&cm_t35_lcd_device);
platform_device_register(&cm_t35_tv_connector_device);
}
static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {

96
arch/arm/mach-omap2/board-devkit8000.c
View File

@ -112,50 +112,81 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi2.0"),
};
static struct panel_generic_dpi_data lcd_panel = {
.name = "innolux_at070tn83",
/* gpios filled in code */
static const struct display_timing devkit8000_lcd_videomode = {
.pixelclock = { 0, 40000000, 0 },
.hactive = { 0, 800, 0 },
.hfront_porch = { 0, 1, 0 },
.hback_porch = { 0, 1, 0 },
.hsync_len = { 0, 48, 0 },
.vactive = { 0, 480, 0 },
.vfront_porch = { 0, 12, 0 },
.vback_porch = { 0, 25, 0 },
.vsync_len = { 0, 3, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct omap_dss_device devkit8000_lcd_device = {
static struct panel_dpi_platform_data devkit8000_lcd_pdata = {
.name = "lcd",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24,
.source = "dpi.0",
.data_lines = 24,
.display_timing = &devkit8000_lcd_videomode,
.enable_gpio = -1, /* filled in code */
.backlight_gpio = -1,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = -1,
.i2c_bus_num = 1,
static struct platform_device devkit8000_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &devkit8000_lcd_pdata,
};
static struct omap_dss_device devkit8000_dvi_device = {
static struct connector_dvi_platform_data devkit8000_dvi_connector_pdata = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.source = "tfp410.0",
.i2c_bus_num = 1,
};
static struct omap_dss_device devkit8000_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
static struct platform_device devkit8000_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &devkit8000_dvi_connector_pdata,
};
static struct encoder_tfp410_platform_data devkit8000_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = -1, /* filled in code */
};
static struct omap_dss_device *devkit8000_dss_devices[] = {
&devkit8000_lcd_device,
&devkit8000_dvi_device,
&devkit8000_tv_device,
static struct platform_device devkit8000_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &devkit8000_tfp410_pdata,
};
static struct connector_atv_platform_data devkit8000_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct platform_device devkit8000_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &devkit8000_tv_pdata,
};
static struct omap_dss_board_info devkit8000_dss_data = {
.num_devices = ARRAY_SIZE(devkit8000_dss_devices),
.devices = devkit8000_dss_devices,
.default_device = &devkit8000_lcd_device,
.default_display_name = "lcd",
};
static uint32_t board_keymap[] = {
@ -204,11 +235,10 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
lcd_panel.num_gpios = 1;
lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
devkit8000_lcd_pdata.enable_gpio = gpio + TWL4030_GPIO_MAX + 0;
/* gpio + 7 is "DVI_PD" (out, active low) */
dvi_panel.power_down_gpio = gpio + 7;
devkit8000_tfp410_pdata.power_down_gpio = gpio + 7;
return 0;
}
@ -413,6 +443,10 @@ static struct platform_device *devkit8000_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
&omap_dm9000_dev,
&devkit8000_lcd_device,
&devkit8000_tfp410_device,
&devkit8000_dvi_connector_device,
&devkit8000_tv_connector_device,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {

56
arch/arm/mach-omap2/board-h4.c
View File

@ -194,30 +194,48 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
static const struct display_timing cm_t35_lcd_videomode = {
.pixelclock = { 0, 6250000, 0 },
.hactive = { 0, 240, 0 },
.hfront_porch = { 0, 15, 0 },
.hback_porch = { 0, 60, 0 },
.hsync_len = { 0, 15, 0 },
.vactive = { 0, 320, 0 },
.vfront_porch = { 0, 1, 0 },
.vback_porch = { 0, 1, 0 },
.vsync_len = { 0, 1, 0 },
.flags = DISPLAY_FLAGS_HSYNC_HIGH | DISPLAY_FLAGS_VSYNC_HIGH |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct panel_dpi_platform_data cm_t35_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 16,
.display_timing = &cm_t35_lcd_videomode,
.enable_gpio = -1,
.backlight_gpio = -1,
};
static struct platform_device cm_t35_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &cm_t35_lcd_pdata,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
.name = "h4",
};
static struct omap_dss_device h4_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &h4_panel_data,
};
static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
&cm_t35_lcd_device,
};
static struct omap_dss_board_info h4_dss_data = {
.num_devices = ARRAY_SIZE(h4_dss_devices),
.devices = h4_dss_devices,
.default_device = &h4_lcd_device,
.default_display_name = "lcd",
};
/* 2420 Sysboot setup (2430 is different) */

36
arch/arm/mach-omap2/board-igep0020.c
View File

@ -429,31 +429,39 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = IGEP2_GPIO_DVI_PUP,
static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 3,
};
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct platform_device omap3stalker_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &omap3stalker_dvi_connector_pdata,
};
static struct omap_dss_device *igep2_dss_devices[] = {
&igep2_dvi_device
static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = IGEP2_GPIO_DVI_PUP,
};
static struct platform_device omap3stalker_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &omap3stalker_tfp410_pdata,
};
static struct omap_dss_board_info igep2_dss_data = {
.num_devices = ARRAY_SIZE(igep2_dss_devices),
.devices = igep2_dss_devices,
.default_device = &igep2_dvi_device,
.default_display_name = "dvi",
};
static struct platform_device *igep_devices[] __initdata = {
&igep_vwlan_device,
&omap3stalker_tfp410_device,
&omap3stalker_dvi_connector_device,
};
static int igep2_keymap[] = {

68
arch/arm/mach-omap2/board-ldp.c
View File

@ -184,45 +184,70 @@ static inline void __init ldp_init_smsc911x(void)
#define LCD_PANEL_RESET_GPIO 55
#define LCD_PANEL_QVGA_GPIO 56
static struct panel_generic_dpi_data ldp_panel_data = {
.name = "nec_nl2432dr22-11b",
.num_gpios = 4,
/* gpios filled in code */
static const struct display_timing ldp_lcd_videomode = {
.pixelclock = { 0, 5400000, 0 },
.hactive = { 0, 240, 0 },
.hfront_porch = { 0, 3, 0 },
.hback_porch = { 0, 39, 0 },
.hsync_len = { 0, 3, 0 },
.vactive = { 0, 320, 0 },
.vfront_porch = { 0, 2, 0 },
.vback_porch = { 0, 7, 0 },
.vsync_len = { 0, 1, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
static struct omap_dss_device ldp_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.data = &ldp_panel_data,
static struct panel_dpi_platform_data ldp_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 18,
.display_timing = &ldp_lcd_videomode,
.enable_gpio = -1, /* filled in code */
.backlight_gpio = -1, /* filled in code */
};
static struct omap_dss_device *ldp_dss_devices[] = {
&ldp_lcd_device,
static struct platform_device ldp_lcd_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &ldp_lcd_pdata,
};
static struct omap_dss_board_info ldp_dss_data = {
.num_devices = ARRAY_SIZE(ldp_dss_devices),
.devices = ldp_dss_devices,
.default_device = &ldp_lcd_device,
.default_display_name = "lcd",
};
static void __init ldp_display_init(void)
{
ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
int r;
static struct gpio gpios[] __initdata = {
{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
};
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
if (r) {
pr_err("Cannot request LCD GPIOs, error %d\n", r);
return;
}
omap_display_init(&ldp_dss_data);
}
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
{
ldp_panel_data.gpios[0] = gpio + 7;
ldp_panel_data.gpio_invert[0] = true;
/* LCD enable GPIO */
ldp_lcd_pdata.enable_gpio = gpio + 7;
ldp_panel_data.gpios[1] = gpio + 15;
ldp_panel_data.gpio_invert[1] = true;
/* Backlight enable GPIO */
ldp_lcd_pdata.backlight_gpio = gpio + 15;
return 0;
}
@ -322,6 +347,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
static struct platform_device *ldp_devices[] __initdata = {
&ldp_gpio_keys_device,
&ldp_lcd_device,
};
#ifdef CONFIG_OMAP_MUX

56
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -225,35 +225,46 @@ static struct mtd_partition omap3beagle_nand_partitions[] = {
/* DSS */
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
static struct connector_dvi_platform_data beagle_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 3,
};
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct platform_device beagle_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &beagle_dvi_connector_pdata,
};
static struct omap_dss_device beagle_tv_device = {
static struct encoder_tfp410_platform_data beagle_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = -1,
};
static struct platform_device beagle_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &beagle_tfp410_pdata,
};
static struct connector_atv_platform_data beagle_tv_pdata = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct omap_dss_device *beagle_dss_devices[] = {
&beagle_dvi_device,
&beagle_tv_device,
static struct platform_device beagle_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &beagle_tv_pdata,
};
static struct omap_dss_board_info beagle_dss_data = {
.num_devices = ARRAY_SIZE(beagle_dss_devices),
.devices = beagle_dss_devices,
.default_device = &beagle_dvi_device,
.default_display_name = "dvi",
};
#include "sdram-micron-mt46h32m32lf-6.h"
@ -332,7 +343,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio;
platform_device_register(&beagle_tfp410_device);
platform_device_register(&beagle_dvi_connector_device);
platform_device_register(&beagle_tv_connector_device);
/* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
@ -547,6 +562,7 @@ static void __init omap3_beagle_init(void)
if (gpio_is_valid(beagle_config.dvi_pd_gpio))
omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);

87
arch/arm/mach-omap2/board-omap3evm.c
View File

@ -166,14 +166,6 @@ static inline void __init omap3evm_init_smsc911x(void) { return; }
*/
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
};
#ifdef CONFIG_BROKEN
static void __init omap3_evm_display_init(void)
{
@ -196,44 +188,65 @@ static void __init omap3_evm_display_init(void)
}
#endif
static struct omap_dss_device omap3_evm_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.data = &omap3_evm_lcd_data,
static struct panel_sharp_ls037v7dw01_platform_data omap3_evm_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 18,
.resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
.ini_gpio = OMAP3EVM_LCD_PANEL_INI,
.mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
.lr_gpio = OMAP3EVM_LCD_PANEL_LR,
.ud_gpio = OMAP3EVM_LCD_PANEL_UD,
};
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
static struct platform_device omap3_evm_lcd_device = {
.name = "panel-sharp-ls037v7dw01",
.id = 0,
.dev.platform_data = &omap3_evm_lcd_pdata,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
.i2c_bus_num = -1,
static struct connector_dvi_platform_data omap3_evm_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = -1,
};
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
static struct platform_device omap3_evm_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &omap3_evm_dvi_connector_pdata,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
&omap3_evm_lcd_device,
&omap3_evm_tv_device,
&omap3_evm_dvi_device,
static struct encoder_tfp410_platform_data omap3_evm_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO,
};
static struct platform_device omap3_evm_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &omap3_evm_tfp410_pdata,
};
static struct connector_atv_platform_data omap3_evm_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct platform_device omap3_evm_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &omap3_evm_tv_pdata,
};
static struct omap_dss_board_info omap3_evm_dss_data = {
.num_devices = ARRAY_SIZE(omap3_evm_dss_devices),
.devices = omap3_evm_dss_devices,
.default_device = &omap3_evm_lcd_device,
.default_display_name = "lcd",
};
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
@ -678,6 +691,10 @@ static void __init omap3_evm_init(void)
omap3_evm_i2c_init();
omap_display_init(&omap3_evm_dss_data);
platform_device_register(&omap3_evm_lcd_device);
platform_device_register(&omap3_evm_tfp410_device);
platform_device_register(&omap3_evm_dvi_connector_device);
platform_device_register(&omap3_evm_tv_connector_device);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);

48
arch/arm/mach-omap2/board-omap3pandora.c
View File

@ -231,34 +231,21 @@ static struct twl4030_keypad_data pandora_kp_data = {
.rep = 1,
};
static struct panel_tpo_td043_data lcd_data = {
.nreset_gpio = 157,
static struct connector_atv_platform_data pandora_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct omap_dss_device pandora_lcd_device = {
.name = "lcd",
.driver_name = "tpo_td043mtea1_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.data = &lcd_data,
};
static struct omap_dss_device pandora_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
};
static struct omap_dss_device *pandora_dss_devices[] = {
&pandora_lcd_device,
&pandora_tv_device,
static struct platform_device pandora_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &pandora_tv_pdata,
};
static struct omap_dss_board_info pandora_dss_data = {
.num_devices = ARRAY_SIZE(pandora_dss_devices),
.devices = pandora_dss_devices,
.default_device = &pandora_lcd_device,
.default_display_name = "lcd",
};
static void pandora_wl1251_init_card(struct mmc_card *card)
@ -348,7 +335,7 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
};
static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
REGULATOR_SUPPLY("vcc", "display0"),
REGULATOR_SUPPLY("vcc", "spi1.1"),
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
@ -529,13 +516,21 @@ static int __init omap3pandora_i2c_init(void)
return 0;
}
static struct panel_tpo_td043mtea1_platform_data pandora_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
.data_lines = 24,
.nreset_gpio = 157,
};
static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
{
.modalias = "tpo_td043mtea1_panel_spi",
.modalias = "panel-tpo-td043mtea1",
.bus_num = 1,
.chip_select = 1,
.max_speed_hz = 375000,
.platform_data = &pandora_lcd_device,
.platform_data = &pandora_lcd_pdata,
}
};
@ -580,6 +575,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_keys_gpio,
&pandora_vwlan_device,
&pandora_backlight,
&pandora_tv_connector_device,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {

63
arch/arm/mach-omap2/board-omap3stalker.c
View File

@ -93,40 +93,50 @@ static void __init omap3_stalker_display_init(void)
{
return;
}
static struct connector_dvi_platform_data omap3stalker_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = -1,
};
static struct omap_dss_device omap3_stalker_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
static struct platform_device omap3stalker_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &omap3stalker_dvi_connector_pdata,
};
static struct encoder_tfp410_platform_data omap3stalker_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = DSS_ENABLE_GPIO,
};
static struct platform_device omap3stalker_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &omap3stalker_tfp410_pdata,
};
static struct connector_atv_platform_data omap3stalker_tv_pdata = {
.name = "tv",
.source = "venc.0",
#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO)
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
.u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
#endif
.invert_polarity = false,
};
static struct tfp410_platform_data dvi_panel = {
.power_down_gpio = DSS_ENABLE_GPIO,
.i2c_bus_num = -1,
};
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
&omap3_stalker_tv_device,
&omap3_stalker_dvi_device,
static struct platform_device omap3stalker_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &omap3stalker_tv_pdata,
};
static struct omap_dss_board_info omap3_stalker_dss_data = {
.num_devices = ARRAY_SIZE(omap3_stalker_dss_devices),
.devices = omap3_stalker_dss_devices,
.default_device = &omap3_stalker_dvi_device,
.default_display_name = "dvi",
};
static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
@ -356,6 +366,9 @@ static struct usbhs_phy_data phy_data[] __initdata = {
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
&omap3stalker_tfp410_device,
&omap3stalker_dvi_connector_device,
&omap3stalker_tv_connector_device,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {

166
arch/arm/mach-omap2/board-overo.c
View File

@ -72,6 +72,9 @@
#define OVERO_SMSC911X2_CS 4
#define OVERO_SMSC911X2_GPIO 65
/* whether to register LCD35 instead of LCD43 */
static bool overo_use_lcd35;
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
@ -149,78 +152,94 @@ static inline void __init overo_init_smsc911x(void) { return; }
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
};
static struct omap_dss_device overo_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "tfp410",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
static struct omap_dss_device overo_tv_device = {
static struct connector_atv_platform_data overo_tv_pdata = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
.invert_polarity = false,
};
static struct panel_generic_dpi_data lcd43_panel = {
.name = "samsung_lte430wq_f0c",
.num_gpios = 2,
.gpios = {
OVERO_GPIO_LCD_EN,
OVERO_GPIO_LCD_BL
},
static struct platform_device overo_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &overo_tv_pdata,
};
static struct omap_dss_device overo_lcd43_device = {
.name = "lcd43",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd43_panel,
.phy.dpi.data_lines = 24,
static const struct display_timing overo_lcd43_videomode = {
.pixelclock = { 0, 9200000, 0 },
.hactive = { 0, 480, 0 },
.hfront_porch = { 0, 8, 0 },
.hback_porch = { 0, 4, 0 },
.hsync_len = { 0, 41, 0 },
.vactive = { 0, 272, 0 },
.vfront_porch = { 0, 4, 0 },
.vback_porch = { 0, 2, 0 },
.vsync_len = { 0, 10, 0 },
.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
};
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
static struct panel_generic_dpi_data lcd35_panel = {
.num_gpios = 2,
.gpios = {
OVERO_GPIO_LCD_EN,
OVERO_GPIO_LCD_BL
},
static struct panel_dpi_platform_data overo_lcd43_pdata = {
.name = "lcd43",
.source = "dpi.0",
.data_lines = 24,
.display_timing = &overo_lcd43_videomode,
.enable_gpio = OVERO_GPIO_LCD_EN,
.backlight_gpio = OVERO_GPIO_LCD_BL,
};
static struct omap_dss_device overo_lcd35_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd35",
.driver_name = "lgphilips_lb035q02_panel",
.phy.dpi.data_lines = 24,
.data = &lcd35_panel,
static struct platform_device overo_lcd43_device = {
.name = "panel-dpi",
.id = 0,
.dev.platform_data = &overo_lcd43_pdata,
};
#endif
static struct omap_dss_device *overo_dss_devices[] = {
&overo_dvi_device,
&overo_tv_device,
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
&overo_lcd35_device,
#endif
&overo_lcd43_device,
static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 3,
};
static struct platform_device overo_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &overo_dvi_connector_pdata,
};
static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = -1,
};
static struct platform_device overo_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &overo_tfp410_pdata,
};
static struct omap_dss_board_info overo_dss_data = {
.num_devices = ARRAY_SIZE(overo_dss_devices),
.devices = overo_dss_devices,
.default_device = &overo_dvi_device,
.default_display_name = "lcd43",
};
static void __init overo_display_init(void)
{
omap_display_init(&overo_dss_data);
if (!overo_use_lcd35)
platform_device_register(&overo_lcd43_device);
platform_device_register(&overo_tfp410_device);
platform_device_register(&overo_dvi_connector_device);
platform_device_register(&overo_tv_connector_device);
}
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
@ -408,24 +427,41 @@ static int __init overo_i2c_init(void)
return 0;
}
static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
.name = "lcd35",
.source = "dpi.0",
.data_lines = 24,
.enable_gpio = OVERO_GPIO_LCD_EN,
.backlight_gpio = OVERO_GPIO_LCD_BL,
};
/*
* NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
* selection is done based on the overo_use_lcd35 field. If new SPI
* devices are added here, extra work is needed to make only the lgphilips panel
* affected by the overo_use_lcd35 field.
*/
static struct spi_board_info overo_spi_board_info[] __initdata = {
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
{
.modalias = "lgphilips_lb035q02_panel-spi",
.modalias = "panel_lgphilips_lb035q02",
.bus_num = 1,
.chip_select = 1,
.max_speed_hz = 500000,
.mode = SPI_MODE_3,
.platform_data = &overo_lcd35_pdata,
},
#endif
};
static int __init overo_spi_init(void)
{
overo_ads7846_init();
spi_register_board_info(overo_spi_board_info,
ARRAY_SIZE(overo_spi_board_info));
if (overo_use_lcd35) {
spi_register_board_info(overo_spi_board_info,
ARRAY_SIZE(overo_spi_board_info));
}
return 0;
}
@ -463,11 +499,13 @@ static void __init overo_init(void)
{
int ret;
if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
overo_use_lcd35 = true;
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
overo_i2c_init();
omap_hsmmc_init(mmc);
omap_display_init(&overo_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
@ -484,6 +522,8 @@ static void __init overo_init(void)
overo_init_keys();
omap_twl4030_audio_init("overo", NULL);
overo_display_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);

12
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -45,6 +45,8 @@
#include <linux/platform_data/tsl2563.h>
#include <linux/lis3lv02d.h>
#include <video/omap-panel-data.h>
#if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
#include <media/ir-rx51.h>
#endif
@ -226,6 +228,15 @@ static struct lp55xx_platform_data rx51_lp5523_platform_data = {
};
#endif
#define RX51_LCD_RESET_GPIO 90
static struct panel_acx565akm_platform_data acx_pdata = {
.name = "lcd",
.source = "sdi.0",
.reset_gpio = RX51_LCD_RESET_GPIO,
.datapairs = 2,
};
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
};
@ -254,6 +265,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
.chip_select = 2,
.max_speed_hz = 6000000,
.controller_data = &mipid_mcspi_config,
.platform_data = &acx_pdata,
},
[RX51_SPI_TSC2005] = {
.modalias = "tsc2005",

35
arch/arm/mach-omap2/board-rx51-video.c
View File

@ -29,34 +29,21 @@
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static struct panel_acx565akm_data lcd_data = {
.reset_gpio = RX51_LCD_RESET_GPIO,
static struct connector_atv_platform_data rx51_tv_pdata = {
.name = "tv",
.source = "venc.0",
.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
.invert_polarity = false,
};
static struct omap_dss_device rx51_lcd_device = {
.name = "lcd",
.driver_name = "panel-acx565akm",
.type = OMAP_DISPLAY_TYPE_SDI,
.phy.sdi.datapairs = 2,
.data = &lcd_data,
};
static struct omap_dss_device rx51_tv_device = {
.name = "tv",
.type = OMAP_DISPLAY_TYPE_VENC,
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
};
static struct omap_dss_device *rx51_dss_devices[] = {
&rx51_lcd_device,
&rx51_tv_device,
static struct platform_device rx51_tv_connector_device = {
.name = "connector-analog-tv",
.id = 0,
.dev.platform_data = &rx51_tv_pdata,
};
static struct omap_dss_board_info rx51_dss_board_info = {
.num_devices = ARRAY_SIZE(rx51_dss_devices),
.devices = rx51_dss_devices,
.default_device = &rx51_lcd_device,
.default_display_name = "lcd",
};
static int __init rx51_video_init(void)
@ -71,6 +58,8 @@ static int __init rx51_video_init(void)
omap_display_init(&rx51_dss_board_info);
platform_device_register(&rx51_tv_connector_device);
return 0;
}

30
arch/arm/mach-omap2/board-zoom-display.c
View File

@ -25,32 +25,23 @@
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
static struct panel_nec_nl8048_data zoom_lcd_data = {
/* res_gpio filled in code */
.qvga_gpio = LCD_PANEL_QVGA_GPIO,
};
static struct panel_nec_nl8048hl11_platform_data zoom_lcd_pdata = {
.name = "lcd",
.source = "dpi.0",
static struct omap_dss_device zoom_lcd_device = {
.name = "lcd",
.driver_name = "NEC_8048_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.data = &zoom_lcd_data,
};
.data_lines = 24,
static struct omap_dss_device *zoom_dss_devices[] = {
&zoom_lcd_device,
.res_gpio = -1, /* filled in code */
.qvga_gpio = LCD_PANEL_QVGA_GPIO,
};
static struct omap_dss_board_info zoom_dss_data = {
.num_devices = ARRAY_SIZE(zoom_dss_devices),
.devices = zoom_dss_devices,
.default_device = &zoom_lcd_device,
.default_display_name = "lcd",
};
static void __init zoom_lcd_panel_init(void)
{
zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
zoom_lcd_pdata.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
LCD_PANEL_RESET_GPIO_PILOT;
}
@ -61,19 +52,20 @@ static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
[0] = {
.modalias = "nec_8048_spi",
.modalias = "panel-nec-nl8048hl11",
.bus_num = 1,
.chip_select = 2,
.max_speed_hz = 375000,
.controller_data = &dss_lcd_mcspi_config,
.platform_data = &zoom_lcd_pdata,
},
};
void __init zoom_display_init(void)
{
omap_display_init(&zoom_dss_data);
zoom_lcd_panel_init();
spi_register_board_info(nec_8048_spi_board_info,
ARRAY_SIZE(nec_8048_spi_board_info));
zoom_lcd_panel_init();
}

4
arch/arm/mach-omap2/display.c
View File

@ -400,7 +400,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
/* Create devices for DPI and SDI */
pdev = create_simple_dss_pdev("omapdss_dpi", -1,
pdev = create_simple_dss_pdev("omapdss_dpi", 0,
board_data, sizeof(*board_data), dss_pdev);
if (IS_ERR(pdev)) {
pr_err("Could not build platform_device for omapdss_dpi\n");
@ -408,7 +408,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
}
if (cpu_is_omap34xx()) {
pdev = create_simple_dss_pdev("omapdss_sdi", -1,
pdev = create_simple_dss_pdev("omapdss_sdi", 0,
board_data, sizeof(*board_data), dss_pdev);
if (IS_ERR(pdev)) {
pr_err("Could not build platform_device for omapdss_sdi\n");

252
arch/arm/mach-omap2/dss-common.c
View File

@ -25,6 +25,7 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@ -37,70 +38,76 @@
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
/* Using generic display panel */
static struct tfp410_platform_data omap4_dvi_panel = {
.i2c_bus_num = 2,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
/* DVI Connector */
static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = {
.name = "dvi",
.source = "tfp410.0",
.i2c_bus_num = 2,
};
static struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
static struct platform_device omap4_panda_dvi_connector_device = {
.name = "connector-dvi",
.id = 0,
.dev.platform_data = &omap4_panda_dvi_connector_pdata,
};
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
/* TFP410 DPI-to-DVI chip */
static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = {
.name = "tfp410.0",
.source = "dpi.0",
.data_lines = 24,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
static struct platform_device omap4_panda_tfp410_device = {
.name = "tfp410",
.id = 0,
.dev.platform_data = &omap4_panda_tfp410_pdata,
};
/* HDMI Connector */
static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = {
.name = "hdmi",
.source = "tpd12s015.0",
};
static struct platform_device omap4_panda_hdmi_connector_device = {
.name = "connector-hdmi",
.id = 0,
.dev.platform_data = &omap4_panda_hdmi_connector_pdata,
};
/* TPD12S015 HDMI ESD protection & level shifter chip */
static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = {
.name = "tpd12s015.0",
.source = "hdmi.0",
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
.ls_oe_gpio = HDMI_GPIO_LS_OE,
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
&omap4_panda_dvi_device,
&omap4_panda_hdmi_device,
static struct platform_device omap4_panda_tpd_device = {
.name = "tpd12s015",
.id = 0,
.dev.platform_data = &omap4_panda_tpd_pdata,
};
static struct omap_dss_board_info omap4_panda_dss_data = {
.num_devices = ARRAY_SIZE(omap4_panda_dss_devices),
.devices = omap4_panda_dss_devices,
.default_device = &omap4_panda_dvi_device,
.default_display_name = "dvi",
};
void __init omap4_panda_display_init(void)
{
omap_display_init(&omap4_panda_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
* later have external pull up on the HDMI I2C lines
*/
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
void __init omap4_panda_display_init_of(void)
{
omap_display_init(&omap4_panda_dss_data);
platform_device_register(&omap4_panda_tfp410_device);
platform_device_register(&omap4_panda_dvi_connector_device);
platform_device_register(&omap4_panda_tpd_device);
platform_device_register(&omap4_panda_hdmi_connector_device);
}
@ -109,93 +116,73 @@ void __init omap4_panda_display_init_of(void)
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
static struct nokia_dsi_panel_data dsi1_panel = {
.name = "taal",
.reset_gpio = 102,
.use_ext_te = false,
.ext_te_gpio = 101,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
};
static struct omap_dss_device sdp4430_lcd_device = {
.name = "lcd",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi1_panel,
.phy.dsi = {
.module = 0,
static struct panel_dsicm_platform_data dsi1_panel = {
.name = "lcd",
.source = "dsi.0",
.reset_gpio = 102,
.use_ext_te = false,
.ext_te_gpio = 101,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
.channel = OMAP_DSS_CHANNEL_LCD,
};
static struct nokia_dsi_panel_data dsi2_panel = {
.name = "taal",
.reset_gpio = 104,
.use_ext_te = false,
.ext_te_gpio = 103,
.esd_interval = 0,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
static struct platform_device sdp4430_lcd_device = {
.name = "panel-dsi-cm",
.id = 0,
.dev.platform_data = &dsi1_panel,
};
static struct omap_dss_device sdp4430_lcd2_device = {
.name = "lcd2",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi2_panel,
.phy.dsi = {
.module = 1,
static struct panel_dsicm_platform_data dsi2_panel = {
.name = "lcd2",
.source = "dsi.1",
.reset_gpio = 104,
.use_ext_te = false,
.ext_te_gpio = 103,
.pin_config = {
.num_pins = 6,
.pins = { 0, 1, 2, 3, 4, 5 },
},
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
static struct platform_device sdp4430_lcd2_device = {
.name = "panel-dsi-cm",
.id = 1,
.dev.platform_data = &dsi2_panel,
};
/* HDMI Connector */
static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = {
.name = "hdmi",
.source = "tpd12s015.0",
};
static struct platform_device sdp4430_hdmi_connector_device = {
.name = "connector-hdmi",
.id = 0,
.dev.platform_data = &sdp4430_hdmi_connector_pdata,
};
/* TPD12S015 HDMI ESD protection & level shifter chip */
static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = {
.name = "tpd12s015.0",
.source = "hdmi.0",
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
.ls_oe_gpio = HDMI_GPIO_LS_OE,
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &sdp4430_hdmi_data,
static struct platform_device sdp4430_tpd_device = {
.name = "tpd12s015",
.id = 0,
.dev.platform_data = &sdp4430_tpd_pdata,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
.picodlp_adapter_id = 2,
.emu_done_gpio = 44,
.pwrgood_gpio = 45,
};
static struct omap_dss_device sdp4430_picodlp_device = {
.name = "picodlp",
.driver_name = "picodlp_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
.data = &sdp4430_picodlp_pdata,
};
static struct omap_dss_device *sdp4430_dss_devices[] = {
&sdp4430_lcd_device,
&sdp4430_lcd2_device,
&sdp4430_hdmi_device,
&sdp4430_picodlp_device,
};
static struct omap_dss_board_info sdp4430_dss_data = {
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
.devices = sdp4430_dss_devices,
.default_device = &sdp4430_lcd_device,
.default_display_name = "lcd",
};
/*
@ -204,35 +191,6 @@ static struct omap_dss_board_info sdp4430_dss_data = {
* used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
* selected by default
*/
void __init omap_4430sdp_display_init(void)
{
int r;
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
"DLP POWER ON");
if (r)
pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
omap_display_init(&sdp4430_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
* later have external pull up on the HDMI I2C lines
*/
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
void __init omap_4430sdp_display_init_of(void)
{
int r;
@ -248,4 +206,10 @@ void __init omap_4430sdp_display_init_of(void)
pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
omap_display_init(&sdp4430_dss_data);
platform_device_register(&sdp4430_lcd_device);
platform_device_register(&sdp4430_lcd2_device);
platform_device_register(&sdp4430_tpd_device);
platform_device_register(&sdp4430_hdmi_connector_device);
}

2
arch/arm/mach-omap2/dss-common.h
View File

@ -6,9 +6,7 @@
* This file will be removed when DSS supports DT.
*/
void __init omap4_panda_display_init(void);
void __init omap4_panda_display_init_of(void);
void __init omap_4430sdp_display_init(void);
void __init omap_4430sdp_display_init_of(void);
#endif

2
drivers/gpu/drm/omapdrm/omap_encoder.c
View File

@ -133,7 +133,7 @@ int omap_encoder_update(struct drm_encoder *encoder,
struct omap_dss_driver *dssdrv = dssdev->driver;
int ret;
dssdev->output->manager = mgr;
dssdev->src->manager = mgr;
if (dssdrv->check_timings) {
ret = dssdrv->check_timings(dssdev, timings);

1
drivers/video/omap2/Kconfig
View File

@ -5,7 +5,6 @@ if ARCH_OMAP2PLUS
source "drivers/video/omap2/dss/Kconfig"
source "drivers/video/omap2/omapfb/Kconfig"
source "drivers/video/omap2/displays/Kconfig"
source "drivers/video/omap2/displays-new/Kconfig"
endif

1
drivers/video/omap2/Makefile
View File

@ -1,6 +1,5 @@
obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
obj-$(CONFIG_OMAP2_DSS) += dss/
obj-y += displays/
obj-y += displays-new/
obj-$(CONFIG_FB_OMAP2) += omapfb/

14
drivers/video/omap2/displays-new/encoder-tfp410.c
View File

@ -43,8 +43,8 @@ static int tfp410_connect(struct omap_dss_device *dssdev,
if (r)
return r;
dst->output = dssdev;
dssdev->device = dst;
dst->src = dssdev;
dssdev->dst = dst;
return 0;
}
@ -59,12 +59,12 @@ static void tfp410_disconnect(struct omap_dss_device *dssdev,
if (!omapdss_device_is_connected(dssdev))
return;
WARN_ON(dst != dssdev->device);
if (dst != dssdev->device)
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->dst)
return;
dst->output = NULL;
dssdev->device = NULL;
dst->src = NULL;
dssdev->dst = NULL;
in->ops.dpi->disconnect(in, &ddata->dssdev);
}
@ -244,7 +244,7 @@ static int __exit tfp410_remove(struct platform_device *pdev)
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
tfp410_disconnect(dssdev, dssdev->device);
tfp410_disconnect(dssdev, dssdev->dst);
omap_dss_put_device(in);

14
drivers/video/omap2/displays-new/encoder-tpd12s015.c
View File

@ -66,8 +66,8 @@ static int tpd_connect(struct omap_dss_device *dssdev,
if (r)
return r;
dst->output = dssdev;
dssdev->device = dst;
dst->src = dssdev;
dssdev->dst = dst;
INIT_COMPLETION(ddata->hpd_completion);
@ -95,15 +95,15 @@ static void tpd_disconnect(struct omap_dss_device *dssdev,
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
gpio_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
dst->output = NULL;
dssdev->device = NULL;
dst->src = NULL;
dssdev->dst = NULL;
in->ops.hdmi->disconnect(in, &ddata->dssdev);
}
@ -372,7 +372,7 @@ static int __exit tpd_remove(struct platform_device *pdev)
WARN_ON(omapdss_device_is_connected(dssdev));
if (omapdss_device_is_connected(dssdev))
tpd_disconnect(dssdev, dssdev->device);
tpd_disconnect(dssdev, dssdev->dst);
omap_dss_put_device(in);

75
drivers/video/omap2/displays/Kconfig
View File

@ -1,75 +0,0 @@
menu "OMAP2/3 Display Device Drivers (old device model)"
depends on OMAP2_DSS
config PANEL_GENERIC_DPI
tristate "Generic DPI Panel"
depends on OMAP2_DSS_DPI
help
Generic DPI panel driver.
Supports DVI output for Beagle and OMAP3 SDP.
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
config PANEL_TFP410
tristate "TFP410 DPI-to-DVI chip"
depends on OMAP2_DSS_DPI && I2C
help
Driver for TFP410 DPI-to-DVI chip. The driver uses i2c to read EDID
information from the monitor.
config PANEL_LGPHILIPS_LB035Q02
tristate "LG.Philips LB035Q02 LCD Panel"
depends on OMAP2_DSS_DPI && SPI
help
LCD Panel used on the Gumstix Overo Palo35
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS_DPI
depends on BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS_DPI
depends on SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This NEC NL8048HL11-01B panel is TFT LCD
used in the Zoom2/3/3630 sdp boards.
config PANEL_PICODLP
tristate "TI PICO DLP mini-projector"
depends on OMAP2_DSS_DPI && I2C
help
A mini-projector used in TI's SDP4430 and EVM boards
For more info please visit http://www.dlp.com/projector/
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Taal DSI command mode panel from TPO.
config PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel"
depends on OMAP2_DSS_DPI && SPI
help
LCD Panel used in OMAP3 Pandora
config PANEL_ACX565AKM
tristate "ACX565AKM Panel"
depends on OMAP2_DSS_SDI && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N900
config PANEL_N8X0
tristate "N8X0 Panel"
depends on OMAP2_DSS_RFBI && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N8x0
endmenu

11
drivers/video/omap2/displays/Makefile
View File

@ -1,11 +0,0 @@
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
obj-$(CONFIG_PANEL_TFP410) += panel-tfp410.o
obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
obj-$(CONFIG_PANEL_PICODLP) += panel-picodlp.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
obj-$(CONFIG_PANEL_N8X0) += panel-n8x0.o

798
drivers/video/omap2/displays/panel-acx565akm.c
View File

@ -1,798 +0,0 @@
/*
* Support for ACX565AKM LCD Panel used on Nokia N900
*
* Copyright (C) 2010 Nokia Corporation
*
* Original Driver Author: Imre Deak <imre.deak@nokia.com>
* Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
* Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#define MIPID_CMD_READ_DISP_ID 0x04
#define MIPID_CMD_READ_RED 0x06
#define MIPID_CMD_READ_GREEN 0x07
#define MIPID_CMD_READ_BLUE 0x08
#define MIPID_CMD_READ_DISP_STATUS 0x09
#define MIPID_CMD_RDDSDR 0x0F
#define MIPID_CMD_SLEEP_IN 0x10
#define MIPID_CMD_SLEEP_OUT 0x11
#define MIPID_CMD_DISP_OFF 0x28
#define MIPID_CMD_DISP_ON 0x29
#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51
#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
#define MIPID_CMD_WRITE_CTRL_DISP 0x53
#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
#define MIPID_CMD_READ_CTRL_DISP 0x54
#define MIPID_CMD_WRITE_CABC 0x55
#define MIPID_CMD_READ_CABC 0x56
#define MIPID_VER_LPH8923 3
#define MIPID_VER_LS041Y3 4
#define MIPID_VER_L4F00311 8
#define MIPID_VER_ACX565AKM 9
struct acx565akm_device {
char *name;
int enabled;
int model;
int revision;
u8 display_id[3];
unsigned has_bc:1;
unsigned has_cabc:1;
unsigned cabc_mode;
unsigned long hw_guard_end; /* next value of jiffies
when we can issue the
next sleep in/out command */
unsigned long hw_guard_wait; /* max guard time in jiffies */
struct spi_device *spi;
struct mutex mutex;
struct omap_dss_device *dssdev;
struct backlight_device *bl_dev;
};
static struct acx565akm_device acx_dev;
static int acx565akm_bl_update_status(struct backlight_device *dev);
/*--------------------MIPID interface-----------------------------*/
static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
struct spi_message m;
struct spi_transfer *x, xfer[5];
int r;
BUG_ON(md->spi == NULL);
spi_message_init(&m);
memset(xfer, 0, sizeof(xfer));
x = &xfer[0];
cmd &= 0xff;
x->tx_buf = &cmd;
x->bits_per_word = 9;
x->len = 2;
if (rlen > 1 && wlen == 0) {
/*
* Between the command and the response data there is a
* dummy clock cycle. Add an extra bit after the command
* word to account for this.
*/
x->bits_per_word = 10;
cmd <<= 1;
}
spi_message_add_tail(x, &m);
if (wlen) {
x++;
x->tx_buf = wbuf;
x->len = wlen;
x->bits_per_word = 9;
spi_message_add_tail(x, &m);
}
if (rlen) {
x++;
x->rx_buf = rbuf;
x->len = rlen;
spi_message_add_tail(x, &m);
}
r = spi_sync(md->spi, &m);
if (r < 0)
dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
}
static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
{
acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
}
static inline void acx565akm_write(struct acx565akm_device *md,
int reg, const u8 *buf, int len)
{
acx565akm_transfer(md, reg, buf, len, NULL, 0);
}
static inline void acx565akm_read(struct acx565akm_device *md,
int reg, u8 *buf, int len)
{
acx565akm_transfer(md, reg, NULL, 0, buf, len);
}
static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
{
md->hw_guard_wait = msecs_to_jiffies(guard_msec);
md->hw_guard_end = jiffies + md->hw_guard_wait;
}
static void hw_guard_wait(struct acx565akm_device *md)
{
unsigned long wait = md->hw_guard_end - jiffies;
if ((long)wait > 0 && wait <= md->hw_guard_wait) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(wait);
}
}
/*----------------------MIPID wrappers----------------------------*/
static void set_sleep_mode(struct acx565akm_device *md, int on)
{
int cmd;
if (on)
cmd = MIPID_CMD_SLEEP_IN;
else
cmd = MIPID_CMD_SLEEP_OUT;
/*
* We have to keep 120msec between sleep in/out commands.
* (8.2.15, 8.2.16).
*/
hw_guard_wait(md);
acx565akm_cmd(md, cmd);
hw_guard_start(md, 120);
}
static void set_display_state(struct acx565akm_device *md, int enabled)
{
int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
acx565akm_cmd(md, cmd);
}
static int panel_enabled(struct acx565akm_device *md)
{
u32 disp_status;
int enabled;
acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
disp_status = __be32_to_cpu(disp_status);
enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
dev_dbg(&md->spi->dev,
"LCD panel %senabled by bootloader (status 0x%04x)\n",
enabled ? "" : "not ", disp_status);
return enabled;
}
static int panel_detect(struct acx565akm_device *md)
{
acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
md->display_id[0], md->display_id[1], md->display_id[2]);
switch (md->display_id[0]) {
case 0x10:
md->model = MIPID_VER_ACX565AKM;
md->name = "acx565akm";
md->has_bc = 1;
md->has_cabc = 1;
break;
case 0x29:
md->model = MIPID_VER_L4F00311;
md->name = "l4f00311";
break;
case 0x45:
md->model = MIPID_VER_LPH8923;
md->name = "lph8923";
break;
case 0x83:
md->model = MIPID_VER_LS041Y3;
md->name = "ls041y3";
break;
default:
md->name = "unknown";
dev_err(&md->spi->dev, "invalid display ID\n");
return -ENODEV;
}
md->revision = md->display_id[1];
dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
md->name, md->revision);
return 0;
}
/*----------------------Backlight Control-------------------------*/
static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
{
u16 ctrl;
acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
if (enable) {
ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON;
} else {
ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
CTRL_DISP_BACKLIGHT_ON);
}
ctrl |= 1 << 8;
acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
}
static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
{
u16 cabc_ctrl;
md->cabc_mode = mode;
if (!md->enabled)
return;
cabc_ctrl = 0;
acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
cabc_ctrl &= ~3;
cabc_ctrl |= (1 << 8) | (mode & 3);
acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
}
static unsigned get_cabc_mode(struct acx565akm_device *md)
{
return md->cabc_mode;
}
static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
{
u8 cabc_ctrl;
acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
return cabc_ctrl & 3;
}
static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
{
int bv;
bv = level | (1 << 8);
acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
if (level)
enable_backlight_ctrl(md, 1);
else
enable_backlight_ctrl(md, 0);
}
static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
{
u8 bv;
acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
return bv;
}
static int acx565akm_bl_update_status(struct backlight_device *dev)
{
struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
int r;
int level;
dev_dbg(&md->spi->dev, "%s\n", __func__);
mutex_lock(&md->mutex);
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK)
level = dev->props.brightness;
else
level = 0;
r = 0;
if (md->has_bc)
acx565akm_set_brightness(md, level);
else
r = -ENODEV;
mutex_unlock(&md->mutex);
return r;
}
static int acx565akm_bl_get_intensity(struct backlight_device *dev)
{
struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
dev_dbg(&dev->dev, "%s\n", __func__);
if (!md->has_bc)
return -ENODEV;
if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
dev->props.power == FB_BLANK_UNBLANK) {
if (md->has_bc)
return acx565akm_get_actual_brightness(md);
else
return dev->props.brightness;
}
return 0;
}
static const struct backlight_ops acx565akm_bl_ops = {
.get_brightness = acx565akm_bl_get_intensity,
.update_status = acx565akm_bl_update_status,
};
/*--------------------Auto Brightness control via Sysfs---------------------*/
static const char *cabc_modes[] = {
"off", /* always used when CABC is not supported */
"ui",
"still-image",
"moving-image",
};
static ssize_t show_cabc_mode(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct acx565akm_device *md = dev_get_drvdata(dev);
const char *mode_str;
int mode;
int len;
if (!md->has_cabc)
mode = 0;
else
mode = get_cabc_mode(md);
mode_str = "unknown";
if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
mode_str = cabc_modes[mode];
len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
}
static ssize_t store_cabc_mode(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct acx565akm_device *md = dev_get_drvdata(dev);
int i;
for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
const char *mode_str = cabc_modes[i];
int cmp_len = strlen(mode_str);
if (count > 0 && buf[count - 1] == '\n')
count--;
if (count != cmp_len)
continue;
if (strncmp(buf, mode_str, cmp_len) == 0)
break;
}
if (i == ARRAY_SIZE(cabc_modes))
return -EINVAL;
if (!md->has_cabc && i != 0)
return -EINVAL;
mutex_lock(&md->mutex);
set_cabc_mode(md, i);
mutex_unlock(&md->mutex);
return count;
}
static ssize_t show_cabc_available_modes(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct acx565akm_device *md = dev_get_drvdata(dev);
int len;
int i;
if (!md->has_cabc)
return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
for (i = 0, len = 0;
len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
i ? " " : "", cabc_modes[i],
i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
}
static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
show_cabc_mode, store_cabc_mode);
static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
show_cabc_available_modes, NULL);
static struct attribute *bldev_attrs[] = {
&dev_attr_cabc_mode.attr,
&dev_attr_cabc_available_modes.attr,
NULL,
};
static struct attribute_group bldev_attr_group = {
.attrs = bldev_attrs,
};
/*---------------------------ACX Panel----------------------------*/
static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
{
return 16;
}
static struct omap_video_timings acx_panel_timings = {
.x_res = 800,
.y_res = 480,
.pixel_clock = 24000,
.hfp = 28,
.hsw = 4,
.hbp = 24,
.vfp = 3,
.vsw = 3,
.vbp = 4,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
static struct panel_acx565akm_data *get_panel_data(struct omap_dss_device *dssdev)
{
return (struct panel_acx565akm_data *) dssdev->data;
}
static int acx_panel_probe(struct omap_dss_device *dssdev)
{
int r;
struct acx565akm_device *md = &acx_dev;
struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
struct backlight_device *bldev;
int max_brightness, brightness;
struct backlight_properties props;
dev_dbg(dssdev->dev, "%s\n", __func__);
if (!panel_data)
return -EINVAL;
/* FIXME AC bias ? */
dssdev->panel.timings = acx_panel_timings;
if (gpio_is_valid(panel_data->reset_gpio)) {
r = devm_gpio_request_one(dssdev->dev, panel_data->reset_gpio,
GPIOF_OUT_INIT_LOW, "lcd reset");
if (r)
return r;
}
if (gpio_is_valid(panel_data->reset_gpio))
gpio_set_value(panel_data->reset_gpio, 1);
/*
* After reset we have to wait 5 msec before the first
* command can be sent.
*/
msleep(5);
md->enabled = panel_enabled(md);
r = panel_detect(md);
if (r) {
dev_err(dssdev->dev, "%s panel detect error\n", __func__);
if (!md->enabled && gpio_is_valid(panel_data->reset_gpio))
gpio_set_value(panel_data->reset_gpio, 0);
return r;
}
mutex_lock(&acx_dev.mutex);
acx_dev.dssdev = dssdev;
mutex_unlock(&acx_dev.mutex);
if (!md->enabled) {
if (gpio_is_valid(panel_data->reset_gpio))
gpio_set_value(panel_data->reset_gpio, 0);
}
/*------- Backlight control --------*/
memset(&props, 0, sizeof(props));
props.fb_blank = FB_BLANK_UNBLANK;
props.power = FB_BLANK_UNBLANK;
props.type = BACKLIGHT_RAW;
bldev = backlight_device_register("acx565akm", &md->spi->dev,
md, &acx565akm_bl_ops, &props);
md->bl_dev = bldev;
if (md->has_cabc) {
r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
if (r) {
dev_err(&bldev->dev,
"%s failed to create sysfs files\n", __func__);
backlight_device_unregister(bldev);
return r;
}
md->cabc_mode = get_hw_cabc_mode(md);
}
max_brightness = 255;
if (md->has_bc)
brightness = acx565akm_get_actual_brightness(md);
else
brightness = 0;
bldev->props.max_brightness = max_brightness;
bldev->props.brightness = brightness;
acx565akm_bl_update_status(bldev);
return 0;
}
static void acx_panel_remove(struct omap_dss_device *dssdev)
{
struct acx565akm_device *md = &acx_dev;
dev_dbg(dssdev->dev, "%s\n", __func__);
sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
backlight_device_unregister(md->bl_dev);
mutex_lock(&acx_dev.mutex);
acx_dev.dssdev = NULL;
mutex_unlock(&acx_dev.mutex);
}
static int acx_panel_power_on(struct omap_dss_device *dssdev)
{
struct acx565akm_device *md = &acx_dev;
struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(dssdev->dev, "%s\n", __func__);
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
mutex_lock(&md->mutex);
omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_sdi_set_datapairs(dssdev, dssdev->phy.sdi.datapairs);
r = omapdss_sdi_display_enable(dssdev);
if (r) {
pr_err("%s sdi enable failed\n", __func__);
goto fail_unlock;
}
/*FIXME tweak me */
msleep(50);
if (gpio_is_valid(panel_data->reset_gpio))
gpio_set_value(panel_data->reset_gpio, 1);
if (md->enabled) {
dev_dbg(&md->spi->dev, "panel already enabled\n");
mutex_unlock(&md->mutex);
return 0;
}
/*
* We have to meet all the following delay requirements:
* 1. tRW: reset pulse width 10usec (7.12.1)
* 2. tRT: reset cancel time 5msec (7.12.1)
* 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
* case (7.6.2)
* 4. 120msec before the sleep out command (7.12.1)
*/
msleep(120);
set_sleep_mode(md, 0);
md->enabled = 1;
/* 5msec between sleep out and the next command. (8.2.16) */
msleep(5);
set_display_state(md, 1);
set_cabc_mode(md, md->cabc_mode);
mutex_unlock(&md->mutex);
return acx565akm_bl_update_status(md->bl_dev);
fail_unlock:
mutex_unlock(&md->mutex);
return r;
}
static void acx_panel_power_off(struct omap_dss_device *dssdev)
{
struct acx565akm_device *md = &acx_dev;
struct panel_acx565akm_data *panel_data = get_panel_data(dssdev);
dev_dbg(dssdev->dev, "%s\n", __func__);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
mutex_lock(&md->mutex);
if (!md->enabled) {
mutex_unlock(&md->mutex);
return;
}
set_display_state(md, 0);
set_sleep_mode(md, 1);
md->enabled = 0;
/*
* We have to provide PCLK,HS,VS signals for 2 frames (worst case
* ~50msec) after sending the sleep in command and asserting the
* reset signal. We probably could assert the reset w/o the delay
* but we still delay to avoid possible artifacts. (7.6.1)
*/
msleep(50);
if (gpio_is_valid(panel_data->reset_gpio))
gpio_set_value(panel_data->reset_gpio, 0);
/* FIXME need to tweak this delay */
msleep(100);
omapdss_sdi_display_disable(dssdev);
mutex_unlock(&md->mutex);
}
static int acx_panel_enable(struct omap_dss_device *dssdev)
{
int r;
dev_dbg(dssdev->dev, "%s\n", __func__);
r = acx_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void acx_panel_disable(struct omap_dss_device *dssdev)
{
dev_dbg(dssdev->dev, "%s\n", __func__);
acx_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static void acx_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
omapdss_sdi_set_timings(dssdev, timings);
dssdev->panel.timings = *timings;
}
static int acx_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
return 0;
}
static struct omap_dss_driver acx_panel_driver = {
.probe = acx_panel_probe,
.remove = acx_panel_remove,
.enable = acx_panel_enable,
.disable = acx_panel_disable,
.set_timings = acx_panel_set_timings,
.check_timings = acx_panel_check_timings,
.get_recommended_bpp = acx_get_recommended_bpp,
.driver = {
.name = "panel-acx565akm",
.owner = THIS_MODULE,
},
};
/*--------------------SPI probe-------------------------*/
static int acx565akm_spi_probe(struct spi_device *spi)
{
struct acx565akm_device *md = &acx_dev;
dev_dbg(&spi->dev, "%s\n", __func__);
spi->mode = SPI_MODE_3;
md->spi = spi;
mutex_init(&md->mutex);
dev_set_drvdata(&spi->dev, md);
omap_dss_register_driver(&acx_panel_driver);
return 0;
}
static int acx565akm_spi_remove(struct spi_device *spi)
{
struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
dev_dbg(&md->spi->dev, "%s\n", __func__);
omap_dss_unregister_driver(&acx_panel_driver);
return 0;
}
static struct spi_driver acx565akm_spi_driver = {
.driver = {
.name = "acx565akm",
.owner = THIS_MODULE,
},
.probe = acx565akm_spi_probe,
.remove = acx565akm_spi_remove,
};
module_spi_driver(acx565akm_spi_driver);
MODULE_AUTHOR("Nokia Corporation");
MODULE_DESCRIPTION("acx565akm LCD Driver");
MODULE_LICENSE("GPL");

744
drivers/video/omap2/displays/panel-generic-dpi.c
View File

@ -1,744 +0,0 @@
/*
* Generic DPI Panels support
*
* Copyright (C) 2010 Canonical Ltd.
* Author: Bryan Wu <bryan.wu@canonical.com>
*
* LCD panel driver for Sharp LQ043T1DG01
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* LCD panel driver for Toppoly TDO35S
*
* Copyright (C) 2009 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_config {
struct omap_video_timings timings;
int power_on_delay;
int power_off_delay;
/*
* Used to match device to panel configuration
* when use generic panel driver
*/
const char *name;
};
/* Panel configurations */
static struct panel_config generic_dpi_panels[] = {
/* Sharp LQ043T1DG01 */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 9000,
.hsw = 42,
.hfp = 3,
.hbp = 2,
.vsw = 11,
.vfp = 3,
.vbp = 2,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_LOW,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 50,
.power_off_delay = 100,
.name = "sharp_lq",
},
/* Sharp LS037V7DW01 */
{
{
.x_res = 480,
.y_res = 640,
.pixel_clock = 19200,
.hsw = 2,
.hfp = 1,
.hbp = 28,
.vsw = 1,
.vfp = 1,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 50,
.power_off_delay = 100,
.name = "sharp_ls",
},
/* Toppoly TDO35S */
{
{
.x_res = 480,
.y_res = 640,
.pixel_clock = 26000,
.hfp = 104,
.hsw = 8,
.hbp = 8,
.vfp = 4,
.vsw = 2,
.vbp = 2,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "toppoly_tdo35s",
},
/* Samsung LTE430WQ-F0C */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 9200,
.hfp = 8,
.hsw = 41,
.hbp = 45 - 41,
.vfp = 4,
.vsw = 10,
.vbp = 12 - 10,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "samsung_lte430wq_f0c",
},
/* Seiko 70WVW1TZ3Z3 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 33000,
.hsw = 128,
.hfp = 10,
.hbp = 10,
.vsw = 2,
.vfp = 4,
.vbp = 11,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "seiko_70wvw1tz3",
},
/* Powertip PH480272T */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 9000,
.hsw = 40,
.hfp = 2,
.hbp = 2,
.vsw = 10,
.vfp = 2,
.vbp = 2,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_LOW,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "powertip_ph480272t",
},
/* Innolux AT070TN83 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 40000,
.hsw = 48,
.hfp = 1,
.hbp = 1,
.vsw = 3,
.vfp = 12,
.vbp = 25,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "innolux_at070tn83",
},
/* NEC NL2432DR22-11B */
{
{
.x_res = 240,
.y_res = 320,
.pixel_clock = 5400,
.hsw = 3,
.hfp = 3,
.hbp = 39,
.vsw = 1,
.vfp = 2,
.vbp = 7,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "nec_nl2432dr22-11b",
},
/* Unknown panel used in OMAP H4 */
{
{
.x_res = 240,
.y_res = 320,
.pixel_clock = 6250,
.hsw = 15,
.hfp = 15,
.hbp = 60,
.vsw = 1,
.vfp = 1,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "h4",
},
/* FocalTech ETM070003DH6 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 28000,
.hsw = 48,
.hfp = 40,
.hbp = 40,
.vsw = 3,
.vfp = 13,
.vbp = 29,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "focaltech_etm070003dh6",
},
/* Microtips Technologies - UMSH-8173MD */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 34560,
.hsw = 13,
.hfp = 101,
.hbp = 101,
.vsw = 23,
.vfp = 1,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.power_on_delay = 0,
.power_off_delay = 0,
.name = "microtips_umsh_8173md",
},
/* OrtusTech COM43H4M10XTC */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 8000,
.hsw = 41,
.hfp = 8,
.hbp = 4,
.vsw = 10,
.vfp = 4,
.vbp = 2,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "ortustech_com43h4m10xtc",
},
/* Innolux AT080TN52 */
{
{
.x_res = 800,
.y_res = 600,
.pixel_clock = 41142,
.hsw = 20,
.hfp = 210,
.hbp = 46,
.vsw = 10,
.vfp = 12,
.vbp = 23,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_LOW,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "innolux_at080tn52",
},
/* Mitsubishi AA084SB01 */
{
{
.x_res = 800,
.y_res = 600,
.pixel_clock = 40000,
.hsw = 1,
.hfp = 254,
.hbp = 1,
.vsw = 1,
.vfp = 26,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "mitsubishi_aa084sb01",
},
/* EDT ET0500G0DH6 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 33260,
.hsw = 128,
.hfp = 216,
.hbp = 40,
.vsw = 2,
.vfp = 35,
.vbp = 10,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "edt_et0500g0dh6",
},
/* Prime-View PD050VL1 */
{
{
.x_res = 640,
.y_res = 480,
.pixel_clock = 25000,
.hsw = 96,
.hfp = 18,
.hbp = 46,
.vsw = 2,
.vfp = 10,
.vbp = 33,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "primeview_pd050vl1",
},
/* Prime-View PM070WL4 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 32000,
.hsw = 128,
.hfp = 42,
.hbp = 86,
.vsw = 2,
.vfp = 10,
.vbp = 33,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "primeview_pm070wl4",
},
/* Prime-View PD104SLF */
{
{
.x_res = 800,
.y_res = 600,
.pixel_clock = 40000,
.hsw = 128,
.hfp = 42,
.hbp = 86,
.vsw = 4,
.vfp = 1,
.vbp = 23,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
},
.name = "primeview_pd104slf",
},
};
struct panel_drv_data {
struct omap_dss_device *dssdev;
struct panel_config *panel_config;
struct mutex lock;
};
static inline struct panel_generic_dpi_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_generic_dpi_data *) dssdev->data;
}
static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
{
int r, i;
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
struct panel_config *panel_config = drv_data->panel_config;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
if (panel_config->power_on_delay)
msleep(panel_config->power_on_delay);
for (i = 0; i < panel_data->num_gpios; ++i) {
gpio_set_value_cansleep(panel_data->gpios[i],
panel_data->gpio_invert[i] ? 0 : 1);
}
return 0;
err0:
return r;
}
static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
struct panel_config *panel_config = drv_data->panel_config;
int i;
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
for (i = panel_data->num_gpios - 1; i >= 0; --i) {
gpio_set_value_cansleep(panel_data->gpios[i],
panel_data->gpio_invert[i] ? 1 : 0);
}
/* wait couple of vsyncs after disabling the LCD */
if (panel_config->power_off_delay)
msleep(panel_config->power_off_delay);
omapdss_dpi_display_disable(dssdev);
}
static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_config *panel_config = NULL;
struct panel_drv_data *drv_data = NULL;
int i, r;
dev_dbg(dssdev->dev, "probe\n");
if (!panel_data || !panel_data->name)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(generic_dpi_panels); i++) {
if (strcmp(panel_data->name, generic_dpi_panels[i].name) == 0) {
panel_config = &generic_dpi_panels[i];
break;
}
}
if (!panel_config)
return -EINVAL;
for (i = 0; i < panel_data->num_gpios; ++i) {
r = devm_gpio_request_one(dssdev->dev, panel_data->gpios[i],
panel_data->gpio_invert[i] ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
"panel gpio");
if (r)
return r;
}
dssdev->panel.timings = panel_config->timings;
drv_data = devm_kzalloc(dssdev->dev, sizeof(*drv_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
drv_data->dssdev = dssdev;
drv_data->panel_config = panel_config;
mutex_init(&drv_data->lock);
dev_set_drvdata(dssdev->dev, drv_data);
return 0;
}
static void __exit generic_dpi_panel_remove(struct omap_dss_device *dssdev)
{
dev_dbg(dssdev->dev, "remove\n");
dev_set_drvdata(dssdev->dev, NULL);
}
static int generic_dpi_panel_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
int r;
mutex_lock(&drv_data->lock);
r = generic_dpi_panel_power_on(dssdev);
if (r)
goto err;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
err:
mutex_unlock(&drv_data->lock);
return r;
}
static void generic_dpi_panel_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
mutex_lock(&drv_data->lock);
generic_dpi_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&drv_data->lock);
}
static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
mutex_lock(&drv_data->lock);
omapdss_dpi_set_timings(dssdev, timings);
dssdev->panel.timings = *timings;
mutex_unlock(&drv_data->lock);
}
static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
mutex_lock(&drv_data->lock);
*timings = dssdev->panel.timings;
mutex_unlock(&drv_data->lock);
}
static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *drv_data = dev_get_drvdata(dssdev->dev);
int r;
mutex_lock(&drv_data->lock);
r = dpi_check_timings(dssdev, timings);
mutex_unlock(&drv_data->lock);
return r;
}
static struct omap_dss_driver dpi_driver = {
.probe = generic_dpi_panel_probe,
.remove = __exit_p(generic_dpi_panel_remove),
.enable = generic_dpi_panel_enable,
.disable = generic_dpi_panel_disable,
.set_timings = generic_dpi_panel_set_timings,
.get_timings = generic_dpi_panel_get_timings,
.check_timings = generic_dpi_panel_check_timings,
.driver = {
.name = "generic_dpi_panel",
.owner = THIS_MODULE,
},
};
static int __init generic_dpi_panel_drv_init(void)
{
return omap_dss_register_driver(&dpi_driver);
}
static void __exit generic_dpi_panel_drv_exit(void)
{
omap_dss_unregister_driver(&dpi_driver);
}
module_init(generic_dpi_panel_drv_init);
module_exit(generic_dpi_panel_drv_exit);
MODULE_LICENSE("GPL");

262
drivers/video/omap2/displays/panel-lgphilips-lb035q02.c
View File

@ -1,262 +0,0 @@
/*
* LCD panel driver for LG.Philips LB035Q02
*
* Author: Steve Sakoman <steve@sakoman.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct lb035q02_data {
struct mutex lock;
};
static struct omap_video_timings lb035q02_timings = {
.x_res = 320,
.y_res = 240,
.pixel_clock = 6500,
.hsw = 2,
.hfp = 20,
.hbp = 68,
.vsw = 2,
.vfp = 4,
.vbp = 18,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
static inline struct panel_generic_dpi_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_generic_dpi_data *) dssdev->data;
}
static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
int r, i;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
for (i = 0; i < panel_data->num_gpios; ++i) {
gpio_set_value_cansleep(panel_data->gpios[i],
panel_data->gpio_invert[i] ? 0 : 1);
}
return 0;
err0:
return r;
}
static void lb035q02_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
int i;
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
for (i = panel_data->num_gpios - 1; i >= 0; --i) {
gpio_set_value_cansleep(panel_data->gpios[i],
panel_data->gpio_invert[i] ? 1 : 0);
}
omapdss_dpi_display_disable(dssdev);
}
static int lb035q02_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct lb035q02_data *ld;
int r, i;
if (!panel_data)
return -EINVAL;
dssdev->panel.timings = lb035q02_timings;
ld = devm_kzalloc(dssdev->dev, sizeof(*ld), GFP_KERNEL);
if (!ld)
return -ENOMEM;
for (i = 0; i < panel_data->num_gpios; ++i) {
r = devm_gpio_request_one(dssdev->dev, panel_data->gpios[i],
panel_data->gpio_invert[i] ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
"panel gpio");
if (r)
return r;
}
mutex_init(&ld->lock);
dev_set_drvdata(dssdev->dev, ld);
return 0;
}
static void lb035q02_panel_remove(struct omap_dss_device *dssdev)
{
}
static int lb035q02_panel_enable(struct omap_dss_device *dssdev)
{
struct lb035q02_data *ld = dev_get_drvdata(dssdev->dev);
int r;
mutex_lock(&ld->lock);
r = lb035q02_panel_power_on(dssdev);
if (r)
goto err;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&ld->lock);
return 0;
err:
mutex_unlock(&ld->lock);
return r;
}
static void lb035q02_panel_disable(struct omap_dss_device *dssdev)
{
struct lb035q02_data *ld = dev_get_drvdata(dssdev->dev);
mutex_lock(&ld->lock);
lb035q02_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&ld->lock);
}
static struct omap_dss_driver lb035q02_driver = {
.probe = lb035q02_panel_probe,
.remove = lb035q02_panel_remove,
.enable = lb035q02_panel_enable,
.disable = lb035q02_panel_disable,
.driver = {
.name = "lgphilips_lb035q02_panel",
.owner = THIS_MODULE,
},
};
static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
{
struct spi_message msg;
struct spi_transfer index_xfer = {
.len = 3,
.cs_change = 1,
};
struct spi_transfer value_xfer = {
.len = 3,
};
u8 buffer[16];
spi_message_init(&msg);
/* register index */
buffer[0] = 0x70;
buffer[1] = 0x00;
buffer[2] = reg & 0x7f;
index_xfer.tx_buf = buffer;
spi_message_add_tail(&index_xfer, &msg);
/* register value */
buffer[4] = 0x72;
buffer[5] = val >> 8;
buffer[6] = val;
value_xfer.tx_buf = buffer + 4;
spi_message_add_tail(&value_xfer, &msg);
return spi_sync(spi, &msg);
}
static void init_lb035q02_panel(struct spi_device *spi)
{
/* Init sequence from page 28 of the lb035q02 spec */
lb035q02_write_reg(spi, 0x01, 0x6300);
lb035q02_write_reg(spi, 0x02, 0x0200);
lb035q02_write_reg(spi, 0x03, 0x0177);
lb035q02_write_reg(spi, 0x04, 0x04c7);
lb035q02_write_reg(spi, 0x05, 0xffc0);
lb035q02_write_reg(spi, 0x06, 0xe806);
lb035q02_write_reg(spi, 0x0a, 0x4008);
lb035q02_write_reg(spi, 0x0b, 0x0000);
lb035q02_write_reg(spi, 0x0d, 0x0030);
lb035q02_write_reg(spi, 0x0e, 0x2800);
lb035q02_write_reg(spi, 0x0f, 0x0000);
lb035q02_write_reg(spi, 0x16, 0x9f80);
lb035q02_write_reg(spi, 0x17, 0x0a0f);
lb035q02_write_reg(spi, 0x1e, 0x00c1);
lb035q02_write_reg(spi, 0x30, 0x0300);
lb035q02_write_reg(spi, 0x31, 0x0007);
lb035q02_write_reg(spi, 0x32, 0x0000);
lb035q02_write_reg(spi, 0x33, 0x0000);
lb035q02_write_reg(spi, 0x34, 0x0707);
lb035q02_write_reg(spi, 0x35, 0x0004);
lb035q02_write_reg(spi, 0x36, 0x0302);
lb035q02_write_reg(spi, 0x37, 0x0202);
lb035q02_write_reg(spi, 0x3a, 0x0a0d);
lb035q02_write_reg(spi, 0x3b, 0x0806);
}
static int lb035q02_panel_spi_probe(struct spi_device *spi)
{
init_lb035q02_panel(spi);
return omap_dss_register_driver(&lb035q02_driver);
}
static int lb035q02_panel_spi_remove(struct spi_device *spi)
{
omap_dss_unregister_driver(&lb035q02_driver);
return 0;
}
static struct spi_driver lb035q02_spi_driver = {
.driver = {
.name = "lgphilips_lb035q02_panel-spi",
.owner = THIS_MODULE,
},
.probe = lb035q02_panel_spi_probe,
.remove = lb035q02_panel_spi_remove,
};
module_spi_driver(lb035q02_spi_driver);
MODULE_LICENSE("GPL");

616
drivers/video/omap2/displays/panel-n8x0.c
View File

@ -1,616 +0,0 @@
/* #define DEBUG */
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#define BLIZZARD_REV_CODE 0x00
#define BLIZZARD_CONFIG 0x02
#define BLIZZARD_PLL_DIV 0x04
#define BLIZZARD_PLL_LOCK_RANGE 0x06
#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08
#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a
#define BLIZZARD_PLL_MODE 0x0c
#define BLIZZARD_CLK_SRC 0x0e
#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10
#define BLIZZARD_MEM_BANK0_STATUS 0x14
#define BLIZZARD_PANEL_CONFIGURATION 0x28
#define BLIZZARD_HDISP 0x2a
#define BLIZZARD_HNDP 0x2c
#define BLIZZARD_VDISP0 0x2e
#define BLIZZARD_VDISP1 0x30
#define BLIZZARD_VNDP 0x32
#define BLIZZARD_HSW 0x34
#define BLIZZARD_VSW 0x38
#define BLIZZARD_DISPLAY_MODE 0x68
#define BLIZZARD_INPUT_WIN_X_START_0 0x6c
#define BLIZZARD_DATA_SOURCE_SELECT 0x8e
#define BLIZZARD_DISP_MEM_DATA_PORT 0x90
#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92
#define BLIZZARD_POWER_SAVE 0xE6
#define BLIZZARD_NDISP_CTRL_STATUS 0xE8
/* Data source select */
/* For S1D13745 */
#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00
#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01
#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04
#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05
/* For S1D13744 */
#define BLIZZARD_SRC_WRITE_LCD 0x00
#define BLIZZARD_SRC_BLT_LCD 0x06
#define BLIZZARD_COLOR_RGB565 0x01
#define BLIZZARD_COLOR_YUV420 0x09
#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */
#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */
#define MIPID_CMD_READ_DISP_ID 0x04
#define MIPID_CMD_READ_RED 0x06
#define MIPID_CMD_READ_GREEN 0x07
#define MIPID_CMD_READ_BLUE 0x08
#define MIPID_CMD_READ_DISP_STATUS 0x09
#define MIPID_CMD_RDDSDR 0x0F
#define MIPID_CMD_SLEEP_IN 0x10
#define MIPID_CMD_SLEEP_OUT 0x11
#define MIPID_CMD_DISP_OFF 0x28
#define MIPID_CMD_DISP_ON 0x29
static struct panel_drv_data {
struct mutex lock;
struct omap_dss_device *dssdev;
struct spi_device *spidev;
int blizzard_ver;
} s_drv_data;
static inline
struct panel_n8x0_data *get_board_data(const struct omap_dss_device *dssdev)
{
return dssdev->data;
}
static inline
struct panel_drv_data *get_drv_data(const struct omap_dss_device *dssdev)
{
return &s_drv_data;
}
static inline void blizzard_cmd(u8 cmd)
{
omap_rfbi_write_command(&cmd, 1);
}
static inline void blizzard_write(u8 cmd, const u8 *buf, int len)
{
omap_rfbi_write_command(&cmd, 1);
omap_rfbi_write_data(buf, len);
}
static inline void blizzard_read(u8 cmd, u8 *buf, int len)
{
omap_rfbi_write_command(&cmd, 1);
omap_rfbi_read_data(buf, len);
}
static u8 blizzard_read_reg(u8 cmd)
{
u8 data;
blizzard_read(cmd, &data, 1);
return data;
}
static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev,
int x, int y, int w, int h)
{
struct panel_drv_data *ddata = get_drv_data(dssdev);
u8 tmp[18];
int x_end, y_end;
x_end = x + w - 1;
y_end = y + h - 1;
tmp[0] = x;
tmp[1] = x >> 8;
tmp[2] = y;
tmp[3] = y >> 8;
tmp[4] = x_end;
tmp[5] = x_end >> 8;
tmp[6] = y_end;
tmp[7] = y_end >> 8;
/* scaling? */
tmp[8] = x;
tmp[9] = x >> 8;
tmp[10] = y;
tmp[11] = y >> 8;
tmp[12] = x_end;
tmp[13] = x_end >> 8;
tmp[14] = y_end;
tmp[15] = y_end >> 8;
tmp[16] = BLIZZARD_COLOR_RGB565;
if (ddata->blizzard_ver == BLIZZARD_VERSION_S1D13745)
tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
else
tmp[17] = ddata->blizzard_ver == BLIZZARD_VERSION_S1D13744 ?
BLIZZARD_SRC_WRITE_LCD :
BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
omapdss_rfbi_set_pixel_size(dssdev, 16);
omapdss_rfbi_set_data_lines(dssdev, 8);
omap_rfbi_configure(dssdev);
blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
omapdss_rfbi_set_pixel_size(dssdev, 16);
omapdss_rfbi_set_data_lines(dssdev, 16);
omap_rfbi_configure(dssdev);
}
static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf,
int wlen, u8 *rbuf, int rlen)
{
struct spi_message m;
struct spi_transfer *x, xfer[4];
u16 w;
int r;
spi_message_init(&m);
memset(xfer, 0, sizeof(xfer));
x = &xfer[0];
cmd &= 0xff;
x->tx_buf = &cmd;
x->bits_per_word = 9;
x->len = 2;
spi_message_add_tail(x, &m);
if (wlen) {
x++;
x->tx_buf = wbuf;
x->len = wlen;
x->bits_per_word = 9;
spi_message_add_tail(x, &m);
}
if (rlen) {
x++;
x->rx_buf = &w;
x->len = 1;
spi_message_add_tail(x, &m);
if (rlen > 1) {
/* Arrange for the extra clock before the first
* data bit.
*/
x->bits_per_word = 9;
x->len = 2;
x++;
x->rx_buf = &rbuf[1];
x->len = rlen - 1;
spi_message_add_tail(x, &m);
}
}
r = spi_sync(spi, &m);
if (r < 0)
dev_dbg(&spi->dev, "spi_sync %d\n", r);
if (rlen)
rbuf[0] = w & 0xff;
}
static inline void mipid_cmd(struct spi_device *spi, int cmd)
{
mipid_transfer(spi, cmd, NULL, 0, NULL, 0);
}
static inline void mipid_write(struct spi_device *spi,
int reg, const u8 *buf, int len)
{
mipid_transfer(spi, reg, buf, len, NULL, 0);
}
static inline void mipid_read(struct spi_device *spi,
int reg, u8 *buf, int len)
{
mipid_transfer(spi, reg, NULL, 0, buf, len);
}
static void set_data_lines(struct spi_device *spi, int data_lines)
{
u16 par;
switch (data_lines) {
case 16:
par = 0x150;
break;
case 18:
par = 0x160;
break;
case 24:
par = 0x170;
break;
}
mipid_write(spi, 0x3a, (u8 *)&par, 2);
}
static void send_init_string(struct spi_device *spi)
{
u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
mipid_write(spi, 0xc2, (u8 *)initpar, sizeof(initpar));
}
static void send_display_on(struct spi_device *spi)
{
mipid_cmd(spi, MIPID_CMD_DISP_ON);
}
static void send_display_off(struct spi_device *spi)
{
mipid_cmd(spi, MIPID_CMD_DISP_OFF);
}
static void send_sleep_out(struct spi_device *spi)
{
mipid_cmd(spi, MIPID_CMD_SLEEP_OUT);
msleep(120);
}
static void send_sleep_in(struct spi_device *spi)
{
mipid_cmd(spi, MIPID_CMD_SLEEP_IN);
msleep(50);
}
static int n8x0_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
struct panel_n8x0_data *bdata = get_board_data(dssdev);
struct panel_drv_data *ddata = get_drv_data(dssdev);
struct spi_device *spi = ddata->spidev;
u8 rev, conf;
u8 display_id[3];
const char *panel_name;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
gpio_direction_output(bdata->ctrl_pwrdown, 1);
omapdss_rfbi_set_size(dssdev, dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
omapdss_rfbi_set_pixel_size(dssdev, dssdev->ctrl.pixel_size);
omapdss_rfbi_set_data_lines(dssdev, dssdev->phy.rfbi.data_lines);
omapdss_rfbi_set_interface_timings(dssdev, &dssdev->ctrl.rfbi_timings);
r = omapdss_rfbi_display_enable(dssdev);
if (r)
goto err_rfbi_en;
rev = blizzard_read_reg(BLIZZARD_REV_CODE);
conf = blizzard_read_reg(BLIZZARD_CONFIG);
switch (rev & 0xfc) {
case 0x9c:
ddata->blizzard_ver = BLIZZARD_VERSION_S1D13744;
dev_info(dssdev->dev, "s1d13744 LCD controller rev %d "
"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
break;
case 0xa4:
ddata->blizzard_ver = BLIZZARD_VERSION_S1D13745;
dev_info(dssdev->dev, "s1d13745 LCD controller rev %d "
"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
break;
default:
dev_err(dssdev->dev, "invalid s1d1374x revision %02x\n", rev);
r = -ENODEV;
goto err_inv_chip;
}
/* panel */
gpio_direction_output(bdata->panel_reset, 1);
mipid_read(spi, MIPID_CMD_READ_DISP_ID, display_id, 3);
dev_dbg(&spi->dev, "MIPI display ID: %02x%02x%02x\n",
display_id[0], display_id[1], display_id[2]);
switch (display_id[0]) {
case 0x45:
panel_name = "lph8923";
break;
case 0x83:
panel_name = "ls041y3";
break;
default:
dev_err(dssdev->dev, "invalid display ID 0x%x\n",
display_id[0]);
r = -ENODEV;
goto err_inv_panel;
}
dev_info(dssdev->dev, "%s rev %02x LCD detected\n",
panel_name, display_id[1]);
send_sleep_out(spi);
send_init_string(spi);
set_data_lines(spi, 24);
send_display_on(spi);
return 0;
err_inv_panel:
/*
* HACK: we should turn off the panel here, but there is some problem
* with the initialization sequence, and we fail to init the panel if we
* have turned it off
*/
/* gpio_direction_output(bdata->panel_reset, 0); */
err_inv_chip:
omapdss_rfbi_display_disable(dssdev);
err_rfbi_en:
gpio_direction_output(bdata->ctrl_pwrdown, 0);
return r;
}
static void n8x0_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_n8x0_data *bdata = get_board_data(dssdev);
struct panel_drv_data *ddata = get_drv_data(dssdev);
struct spi_device *spi = ddata->spidev;
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
send_display_off(spi);
send_sleep_in(spi);
/*
* HACK: we should turn off the panel here, but there is some problem
* with the initialization sequence, and we fail to init the panel if we
* have turned it off
*/
/* gpio_direction_output(bdata->panel_reset, 0); */
gpio_direction_output(bdata->ctrl_pwrdown, 0);
omapdss_rfbi_display_disable(dssdev);
}
static const struct rfbi_timings n8x0_panel_timings = {
.cs_on_time = 0,
.we_on_time = 9000,
.we_off_time = 18000,
.we_cycle_time = 36000,
.re_on_time = 9000,
.re_off_time = 27000,
.re_cycle_time = 36000,
.access_time = 27000,
.cs_off_time = 36000,
.cs_pulse_width = 0,
};
static int n8x0_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_n8x0_data *bdata = get_board_data(dssdev);
struct panel_drv_data *ddata;
int r;
dev_dbg(dssdev->dev, "probe\n");
if (!bdata)
return -EINVAL;
s_drv_data.dssdev = dssdev;
ddata = &s_drv_data;
mutex_init(&ddata->lock);
dssdev->panel.timings.x_res = 800;
dssdev->panel.timings.y_res = 480;
dssdev->ctrl.pixel_size = 16;
dssdev->ctrl.rfbi_timings = n8x0_panel_timings;
dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
if (gpio_is_valid(bdata->panel_reset)) {
r = devm_gpio_request_one(dssdev->dev, bdata->panel_reset,
GPIOF_OUT_INIT_LOW, "PANEL RESET");
if (r)
return r;
}
if (gpio_is_valid(bdata->ctrl_pwrdown)) {
r = devm_gpio_request_one(dssdev->dev, bdata->ctrl_pwrdown,
GPIOF_OUT_INIT_LOW, "PANEL PWRDOWN");
if (r)
return r;
}
return 0;
}
static void n8x0_panel_remove(struct omap_dss_device *dssdev)
{
dev_dbg(dssdev->dev, "remove\n");
dev_set_drvdata(dssdev->dev, NULL);
}
static int n8x0_panel_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = get_drv_data(dssdev);
int r;
dev_dbg(dssdev->dev, "enable\n");
mutex_lock(&ddata->lock);
rfbi_bus_lock();
r = n8x0_panel_power_on(dssdev);
rfbi_bus_unlock();
if (r) {
mutex_unlock(&ddata->lock);
return r;
}
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&ddata->lock);
return 0;
}
static void n8x0_panel_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = get_drv_data(dssdev);
dev_dbg(dssdev->dev, "disable\n");
mutex_lock(&ddata->lock);
rfbi_bus_lock();
n8x0_panel_power_off(dssdev);
rfbi_bus_unlock();
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&ddata->lock);
}
static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres)
{
*xres = dssdev->panel.timings.x_res;
*yres = dssdev->panel.timings.y_res;
}
static void update_done(void *data)
{
rfbi_bus_unlock();
}
static int n8x0_panel_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct panel_drv_data *ddata = get_drv_data(dssdev);
u16 dw, dh;
dev_dbg(dssdev->dev, "update\n");
dw = dssdev->panel.timings.x_res;
dh = dssdev->panel.timings.y_res;
if (x != 0 || y != 0 || w != dw || h != dh) {
dev_err(dssdev->dev, "invalid update region %d, %d, %d, %d\n",
x, y, w, h);
return -EINVAL;
}
mutex_lock(&ddata->lock);
rfbi_bus_lock();
blizzard_ctrl_setup_update(dssdev, x, y, w, h);
omap_rfbi_update(dssdev, update_done, NULL);
mutex_unlock(&ddata->lock);
return 0;
}
static int n8x0_panel_sync(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = get_drv_data(dssdev);
dev_dbg(dssdev->dev, "sync\n");
mutex_lock(&ddata->lock);
rfbi_bus_lock();
rfbi_bus_unlock();
mutex_unlock(&ddata->lock);
return 0;
}
static struct omap_dss_driver n8x0_panel_driver = {
.probe = n8x0_panel_probe,
.remove = n8x0_panel_remove,
.enable = n8x0_panel_enable,
.disable = n8x0_panel_disable,
.update = n8x0_panel_update,
.sync = n8x0_panel_sync,
.get_resolution = n8x0_panel_get_resolution,
.get_recommended_bpp = omapdss_default_get_recommended_bpp,
.driver = {
.name = "n8x0_panel",
.owner = THIS_MODULE,
},
};
/* PANEL */
static int mipid_spi_probe(struct spi_device *spi)
{
int r;
dev_dbg(&spi->dev, "mipid_spi_probe\n");
spi->mode = SPI_MODE_0;
s_drv_data.spidev = spi;
r = omap_dss_register_driver(&n8x0_panel_driver);
if (r)
pr_err("n8x0_panel: dss driver registration failed\n");
return r;
}
static int mipid_spi_remove(struct spi_device *spi)
{
dev_dbg(&spi->dev, "mipid_spi_remove\n");
omap_dss_unregister_driver(&n8x0_panel_driver);
return 0;
}
static struct spi_driver mipid_spi_driver = {
.driver = {
.name = "lcd_mipid",
.owner = THIS_MODULE,
},
.probe = mipid_spi_probe,
.remove = mipid_spi_remove,
};
module_spi_driver(mipid_spi_driver);
MODULE_LICENSE("GPL");

290
drivers/video/omap2/displays/panel-nec-nl8048hl11-01b.c
View File

@ -1,290 +0,0 @@
/*
* Support for NEC-nl8048hl11-01b panel driver
*
* Copyright (C) 2010 Texas Instruments Inc.
* Author: Erik Gilling <konkers@android.com>
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#define LCD_XRES 800
#define LCD_YRES 480
/*
* NEC PIX Clock Ratings
* MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
*/
#define LCD_PIXEL_CLOCK 23800
static const struct {
unsigned char addr;
unsigned char dat;
} nec_8048_init_seq[] = {
{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
};
/*
* NEC NL8048HL11-01B Manual
* defines HFB, HSW, HBP, VFP, VSW, VBP as shown below
*/
static struct omap_video_timings nec_8048_panel_timings = {
/* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = LCD_XRES,
.y_res = LCD_YRES,
.pixel_clock = LCD_PIXEL_CLOCK,
.hfp = 6,
.hsw = 1,
.hbp = 4,
.vfp = 3,
.vsw = 1,
.vbp = 4,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
};
static inline struct panel_nec_nl8048_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_nec_nl8048_data *) dssdev->data;
}
static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
int r;
if (!pd)
return -EINVAL;
dssdev->panel.timings = nec_8048_panel_timings;
if (gpio_is_valid(pd->qvga_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->qvga_gpio,
GPIOF_OUT_INIT_HIGH, "lcd QVGA");
if (r)
return r;
}
if (gpio_is_valid(pd->res_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->res_gpio,
GPIOF_OUT_INIT_LOW, "lcd RES");
if (r)
return r;
}
return 0;
}
static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
{
}
static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
{
struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (gpio_is_valid(pd->res_gpio))
gpio_set_value_cansleep(pd->res_gpio, 1);
return 0;
err0:
return r;
}
static void nec_8048_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_nec_nl8048_data *pd = get_panel_data(dssdev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (gpio_is_valid(pd->res_gpio))
gpio_set_value_cansleep(pd->res_gpio, 0);
omapdss_dpi_display_disable(dssdev);
}
static int nec_8048_panel_enable(struct omap_dss_device *dssdev)
{
int r;
r = nec_8048_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void nec_8048_panel_disable(struct omap_dss_device *dssdev)
{
nec_8048_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev)
{
return 16;
}
static struct omap_dss_driver nec_8048_driver = {
.probe = nec_8048_panel_probe,
.remove = nec_8048_panel_remove,
.enable = nec_8048_panel_enable,
.disable = nec_8048_panel_disable,
.get_recommended_bpp = nec_8048_recommended_bpp,
.driver = {
.name = "NEC_8048_panel",
.owner = THIS_MODULE,
},
};
static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
unsigned char reg_data)
{
int ret = 0;
unsigned int cmd = 0, data = 0;
cmd = 0x0000 | reg_addr; /* register address write */
data = 0x0100 | reg_data ; /* register data write */
data = (cmd << 16) | data;
ret = spi_write(spi, (unsigned char *)&data, 4);
if (ret)
pr_err("error in spi_write %x\n", data);
return ret;
}
static int init_nec_8048_wvga_lcd(struct spi_device *spi)
{
unsigned int i;
/* Initialization Sequence */
/* nec_8048_spi_send(spi, REG, VAL) */
for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
udelay(20);
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
return 0;
}
static int nec_8048_spi_probe(struct spi_device *spi)
{
spi->mode = SPI_MODE_0;
spi->bits_per_word = 32;
spi_setup(spi);
init_nec_8048_wvga_lcd(spi);
return omap_dss_register_driver(&nec_8048_driver);
}
static int nec_8048_spi_remove(struct spi_device *spi)
{
omap_dss_unregister_driver(&nec_8048_driver);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int nec_8048_spi_suspend(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
nec_8048_spi_send(spi, 2, 0x01);
mdelay(40);
return 0;
}
static int nec_8048_spi_resume(struct device *dev)
{
struct spi_device *spi = to_spi_device(dev);
/* reinitialize the panel */
spi_setup(spi);
nec_8048_spi_send(spi, 2, 0x00);
init_nec_8048_wvga_lcd(spi);
return 0;
}
static SIMPLE_DEV_PM_OPS(nec_8048_spi_pm_ops, nec_8048_spi_suspend,
nec_8048_spi_resume);
#define NEC_8048_SPI_PM_OPS (&nec_8048_spi_pm_ops)
#else
#define NEC_8048_SPI_PM_OPS NULL
#endif
static struct spi_driver nec_8048_spi_driver = {
.probe = nec_8048_spi_probe,
.remove = nec_8048_spi_remove,
.driver = {
.name = "nec_8048_spi",
.owner = THIS_MODULE,
.pm = NEC_8048_SPI_PM_OPS,
},
};
module_spi_driver(nec_8048_spi_driver);
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
MODULE_DESCRIPTION("NEC-nl8048hl11-01b Driver");
MODULE_LICENSE("GPL");

559
drivers/video/omap2/displays/panel-picodlp.c
View File

@ -1,559 +0,0 @@
/*
* picodlp panel driver
* picodlp_i2c_driver: i2c_client driver
*
* Copyright (C) 2009-2011 Texas Instruments
* Author: Mythri P K <mythripk@ti.com>
* Mayuresh Janorkar <mayur@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include "panel-picodlp.h"
struct picodlp_data {
struct mutex lock;
struct i2c_client *picodlp_i2c_client;
};
static struct i2c_board_info picodlp_i2c_board_info = {
I2C_BOARD_INFO("picodlp_i2c_driver", 0x1b),
};
struct picodlp_i2c_data {
struct mutex xfer_lock;
};
static struct i2c_device_id picodlp_i2c_id[] = {
{ "picodlp_i2c_driver", 0 },
{ }
};
struct picodlp_i2c_command {
u8 reg;
u32 value;
};
static struct omap_video_timings pico_ls_timings = {
.x_res = 864,
.y_res = 480,
.hsw = 7,
.hfp = 11,
.hbp = 7,
.pixel_clock = 19200,
.vsw = 2,
.vfp = 3,
.vbp = 14,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
};
static inline struct picodlp_panel_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct picodlp_panel_data *) dssdev->data;
}
static u32 picodlp_i2c_read(struct i2c_client *client, u8 reg)
{
u8 read_cmd[] = {READ_REG_SELECT, reg}, data[4];
struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
struct i2c_msg msg[2];
mutex_lock(&picodlp_i2c_data->xfer_lock);
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = 2;
msg[0].buf = read_cmd;
msg[1].addr = client->addr;
msg[1].flags = I2C_M_RD;
msg[1].len = 4;
msg[1].buf = data;
i2c_transfer(client->adapter, msg, 2);
mutex_unlock(&picodlp_i2c_data->xfer_lock);
return (data[3] | (data[2] << 8) | (data[1] << 16) | (data[0] << 24));
}
static int picodlp_i2c_write_block(struct i2c_client *client,
u8 *data, int len)
{
struct i2c_msg msg;
int i, r, msg_count = 1;
struct picodlp_i2c_data *picodlp_i2c_data = i2c_get_clientdata(client);
if (len < 1 || len > 32) {
dev_err(&client->dev,
"too long syn_write_block len %d\n", len);
return -EIO;
}
mutex_lock(&picodlp_i2c_data->xfer_lock);
msg.addr = client->addr;
msg.flags = 0;
msg.len = len;
msg.buf = data;
r = i2c_transfer(client->adapter, &msg, msg_count);
mutex_unlock(&picodlp_i2c_data->xfer_lock);
/*
* i2c_transfer returns:
* number of messages sent in case of success
* a negative error number in case of failure
*/
if (r != msg_count)
goto err;
/* In case of success */
for (i = 0; i < len; i++)
dev_dbg(&client->dev,
"addr %x bw 0x%02x[%d]: 0x%02x\n",
client->addr, data[0] + i, i, data[i]);
return 0;
err:
dev_err(&client->dev, "picodlp_i2c_write error\n");
return r;
}
static int picodlp_i2c_write(struct i2c_client *client, u8 reg, u32 value)
{
u8 data[5];
int i;
data[0] = reg;
for (i = 1; i < 5; i++)
data[i] = (value >> (32 - (i) * 8)) & 0xFF;
return picodlp_i2c_write_block(client, data, 5);
}
static int picodlp_i2c_write_array(struct i2c_client *client,
const struct picodlp_i2c_command commands[],
int count)
{
int i, r = 0;
for (i = 0; i < count; i++) {
r = picodlp_i2c_write(client, commands[i].reg,
commands[i].value);
if (r)
return r;
}
return r;
}
static int picodlp_wait_for_dma_done(struct i2c_client *client)
{
u8 trial = 100;
do {
msleep(1);
if (!trial--)
return -ETIMEDOUT;
} while (picodlp_i2c_read(client, MAIN_STATUS) & DMA_STATUS);
return 0;
}
/**
* picodlp_i2c_init: i2c_initialization routine
* client: i2c_client for communication
*
* return
* 0 : Success, no error
* error code : Failure
*/
static int picodlp_i2c_init(struct i2c_client *client)
{
int r;
static const struct picodlp_i2c_command init_cmd_set1[] = {
{SOFT_RESET, 1},
{DMD_PARK_TRIGGER, 1},
{MISC_REG, 5},
{SEQ_CONTROL, 0},
{SEQ_VECTOR, 0x100},
{DMD_BLOCK_COUNT, 7},
{DMD_VCC_CONTROL, 0x109},
{DMD_PARK_PULSE_COUNT, 0xA},
{DMD_PARK_PULSE_WIDTH, 0xB},
{DMD_PARK_DELAY, 0x2ED},
{DMD_SHADOW_ENABLE, 0},
{FLASH_OPCODE, 0xB},
{FLASH_DUMMY_BYTES, 1},
{FLASH_ADDR_BYTES, 3},
{PBC_CONTROL, 0},
{FLASH_START_ADDR, CMT_LUT_0_START_ADDR},
{FLASH_READ_BYTES, CMT_LUT_0_SIZE},
{CMT_SPLASH_LUT_START_ADDR, 0},
{CMT_SPLASH_LUT_DEST_SELECT, CMT_LUT_ALL},
{PBC_CONTROL, 1},
};
static const struct picodlp_i2c_command init_cmd_set2[] = {
{PBC_CONTROL, 0},
{CMT_SPLASH_LUT_DEST_SELECT, 0},
{PBC_CONTROL, 0},
{FLASH_START_ADDR, SEQUENCE_0_START_ADDR},
{FLASH_READ_BYTES, SEQUENCE_0_SIZE},
{SEQ_RESET_LUT_START_ADDR, 0},
{SEQ_RESET_LUT_DEST_SELECT, SEQ_SEQ_LUT},
{PBC_CONTROL, 1},
};
static const struct picodlp_i2c_command init_cmd_set3[] = {
{PBC_CONTROL, 0},
{SEQ_RESET_LUT_DEST_SELECT, 0},
{PBC_CONTROL, 0},
{FLASH_START_ADDR, DRC_TABLE_0_START_ADDR},
{FLASH_READ_BYTES, DRC_TABLE_0_SIZE},
{SEQ_RESET_LUT_START_ADDR, 0},
{SEQ_RESET_LUT_DEST_SELECT, SEQ_DRC_LUT_ALL},
{PBC_CONTROL, 1},
};
static const struct picodlp_i2c_command init_cmd_set4[] = {
{PBC_CONTROL, 0},
{SEQ_RESET_LUT_DEST_SELECT, 0},
{SDC_ENABLE, 1},
{AGC_CTRL, 7},
{CCA_C1A, 0x100},
{CCA_C1B, 0x0},
{CCA_C1C, 0x0},
{CCA_C2A, 0x0},
{CCA_C2B, 0x100},
{CCA_C2C, 0x0},
{CCA_C3A, 0x0},
{CCA_C3B, 0x0},
{CCA_C3C, 0x100},
{CCA_C7A, 0x100},
{CCA_C7B, 0x100},
{CCA_C7C, 0x100},
{CCA_ENABLE, 1},
{CPU_IF_MODE, 1},
{SHORT_FLIP, 1},
{CURTAIN_CONTROL, 0},
{DMD_PARK_TRIGGER, 0},
{R_DRIVE_CURRENT, 0x298},
{G_DRIVE_CURRENT, 0x298},
{B_DRIVE_CURRENT, 0x298},
{RGB_DRIVER_ENABLE, 7},
{SEQ_CONTROL, 0},
{ACTGEN_CONTROL, 0x10},
{SEQUENCE_MODE, SEQ_LOCK},
{DATA_FORMAT, RGB888},
{INPUT_RESOLUTION, WVGA_864_LANDSCAPE},
{INPUT_SOURCE, PARALLEL_RGB},
{CPU_IF_SYNC_METHOD, 1},
{SEQ_CONTROL, 1}
};
r = picodlp_i2c_write_array(client, init_cmd_set1,
ARRAY_SIZE(init_cmd_set1));
if (r)
return r;
r = picodlp_wait_for_dma_done(client);
if (r)
return r;
r = picodlp_i2c_write_array(client, init_cmd_set2,
ARRAY_SIZE(init_cmd_set2));
if (r)
return r;
r = picodlp_wait_for_dma_done(client);
if (r)
return r;
r = picodlp_i2c_write_array(client, init_cmd_set3,
ARRAY_SIZE(init_cmd_set3));
if (r)
return r;
r = picodlp_wait_for_dma_done(client);
if (r)
return r;
r = picodlp_i2c_write_array(client, init_cmd_set4,
ARRAY_SIZE(init_cmd_set4));
if (r)
return r;
return 0;
}
static int picodlp_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct picodlp_i2c_data *picodlp_i2c_data;
picodlp_i2c_data = kzalloc(sizeof(struct picodlp_i2c_data), GFP_KERNEL);
if (!picodlp_i2c_data)
return -ENOMEM;
mutex_init(&picodlp_i2c_data->xfer_lock);
i2c_set_clientdata(client, picodlp_i2c_data);
return 0;
}
static int picodlp_i2c_remove(struct i2c_client *client)
{
struct picodlp_i2c_data *picodlp_i2c_data =
i2c_get_clientdata(client);
kfree(picodlp_i2c_data);
return 0;
}
static struct i2c_driver picodlp_i2c_driver = {
.driver = {
.name = "picodlp_i2c_driver",
},
.probe = picodlp_i2c_probe,
.remove = picodlp_i2c_remove,
.id_table = picodlp_i2c_id,
};
static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
{
int r, trial = 100;
struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
msleep(1);
gpio_set_value(picodlp_pdata->pwrgood_gpio, 1);
while (!gpio_get_value(picodlp_pdata->emu_done_gpio)) {
if (!trial--) {
dev_err(dssdev->dev, "emu_done signal not"
" going high\n");
return -ETIMEDOUT;
}
msleep(5);
}
/*
* As per dpp2600 programming guide,
* it is required to sleep for 1000ms after emu_done signal goes high
* then only i2c commands can be successfully sent to dpp2600
*/
msleep(1000);
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r) {
dev_err(dssdev->dev, "failed to enable DPI\n");
goto err1;
}
r = picodlp_i2c_init(picod->picodlp_i2c_client);
if (r)
goto err;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
err:
omapdss_dpi_display_disable(dssdev);
err1:
return r;
}
static void picodlp_panel_power_off(struct omap_dss_device *dssdev)
{
struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
omapdss_dpi_display_disable(dssdev);
gpio_set_value(picodlp_pdata->emu_done_gpio, 0);
gpio_set_value(picodlp_pdata->pwrgood_gpio, 0);
}
static int picodlp_panel_probe(struct omap_dss_device *dssdev)
{
struct picodlp_data *picod;
struct picodlp_panel_data *picodlp_pdata = get_panel_data(dssdev);
struct i2c_adapter *adapter;
struct i2c_client *picodlp_i2c_client;
int r, picodlp_adapter_id;
dssdev->panel.timings = pico_ls_timings;
if (!picodlp_pdata)
return -EINVAL;
picod = devm_kzalloc(dssdev->dev, sizeof(*picod), GFP_KERNEL);
if (!picod)
return -ENOMEM;
mutex_init(&picod->lock);
picodlp_adapter_id = picodlp_pdata->picodlp_adapter_id;
adapter = i2c_get_adapter(picodlp_adapter_id);
if (!adapter) {
dev_err(dssdev->dev, "can't get i2c adapter\n");
return -ENODEV;
}
picodlp_i2c_client = i2c_new_device(adapter, &picodlp_i2c_board_info);
if (!picodlp_i2c_client) {
dev_err(dssdev->dev, "can't add i2c device::"
" picodlp_i2c_client is NULL\n");
return -ENODEV;
}
picod->picodlp_i2c_client = picodlp_i2c_client;
dev_set_drvdata(dssdev->dev, picod);
if (gpio_is_valid(picodlp_pdata->emu_done_gpio)) {
r = devm_gpio_request_one(dssdev->dev,
picodlp_pdata->emu_done_gpio,
GPIOF_IN, "DLP EMU DONE");
if (r)
return r;
}
if (gpio_is_valid(picodlp_pdata->pwrgood_gpio)) {
r = devm_gpio_request_one(dssdev->dev,
picodlp_pdata->pwrgood_gpio,
GPIOF_OUT_INIT_LOW, "DLP PWRGOOD");
if (r)
return r;
}
return 0;
}
static void picodlp_panel_remove(struct omap_dss_device *dssdev)
{
struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
i2c_unregister_device(picod->picodlp_i2c_client);
dev_set_drvdata(dssdev->dev, NULL);
dev_dbg(dssdev->dev, "removing picodlp panel\n");
}
static int picodlp_panel_enable(struct omap_dss_device *dssdev)
{
struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
int r;
dev_dbg(dssdev->dev, "enabling picodlp panel\n");
mutex_lock(&picod->lock);
if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
mutex_unlock(&picod->lock);
return -EINVAL;
}
r = picodlp_panel_power_on(dssdev);
mutex_unlock(&picod->lock);
return r;
}
static void picodlp_panel_disable(struct omap_dss_device *dssdev)
{
struct picodlp_data *picod = dev_get_drvdata(dssdev->dev);
mutex_lock(&picod->lock);
/* Turn off DLP Power */
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
picodlp_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&picod->lock);
dev_dbg(dssdev->dev, "disabling picodlp panel\n");
}
static void picodlp_get_resolution(struct omap_dss_device *dssdev,
u16 *xres, u16 *yres)
{
*xres = dssdev->panel.timings.x_res;
*yres = dssdev->panel.timings.y_res;
}
static struct omap_dss_driver picodlp_driver = {
.probe = picodlp_panel_probe,
.remove = picodlp_panel_remove,
.enable = picodlp_panel_enable,
.disable = picodlp_panel_disable,
.get_resolution = picodlp_get_resolution,
.driver = {
.name = "picodlp_panel",
.owner = THIS_MODULE,
},
};
static int __init picodlp_init(void)
{
int r = 0;
r = i2c_add_driver(&picodlp_i2c_driver);
if (r) {
printk(KERN_WARNING "picodlp_i2c_driver" \
" registration failed\n");
return r;
}
r = omap_dss_register_driver(&picodlp_driver);
if (r)
i2c_del_driver(&picodlp_i2c_driver);
return r;
}
static void __exit picodlp_exit(void)
{
i2c_del_driver(&picodlp_i2c_driver);
omap_dss_unregister_driver(&picodlp_driver);
}
module_init(picodlp_init);
module_exit(picodlp_exit);
MODULE_AUTHOR("Mythri P K <mythripk@ti.com>");
MODULE_DESCRIPTION("picodlp driver");
MODULE_LICENSE("GPL");

288
drivers/video/omap2/displays/panel-picodlp.h
View File

@ -1,288 +0,0 @@
/*
* Header file required by picodlp panel driver
*
* Copyright (C) 2009-2011 Texas Instruments
* Author: Mythri P K <mythripk@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
#define __OMAP2_DISPLAY_PANEL_PICODLP_H
/* Commands used for configuring picodlp panel */
#define MAIN_STATUS 0x03
#define PBC_CONTROL 0x08
#define INPUT_SOURCE 0x0B
#define INPUT_RESOLUTION 0x0C
#define DATA_FORMAT 0x0D
#define IMG_ROTATION 0x0E
#define LONG_FLIP 0x0F
#define SHORT_FLIP 0x10
#define TEST_PAT_SELECT 0x11
#define R_DRIVE_CURRENT 0x12
#define G_DRIVE_CURRENT 0x13
#define B_DRIVE_CURRENT 0x14
#define READ_REG_SELECT 0x15
#define RGB_DRIVER_ENABLE 0x16
#define CPU_IF_MODE 0x18
#define FRAME_RATE 0x19
#define CPU_IF_SYNC_METHOD 0x1A
#define CPU_IF_SOF 0x1B
#define CPU_IF_EOF 0x1C
#define CPU_IF_SLEEP 0x1D
#define SEQUENCE_MODE 0x1E
#define SOFT_RESET 0x1F
#define FRONT_END_RESET 0x21
#define AUTO_PWR_ENABLE 0x22
#define VSYNC_LINE_DELAY 0x23
#define CPU_PI_HORIZ_START 0x24
#define CPU_PI_VERT_START 0x25
#define CPU_PI_HORIZ_WIDTH 0x26
#define CPU_PI_VERT_HEIGHT 0x27
#define PIXEL_MASK_CROP 0x28
#define CROP_FIRST_LINE 0x29
#define CROP_LAST_LINE 0x2A
#define CROP_FIRST_PIXEL 0x2B
#define CROP_LAST_PIXEL 0x2C
#define DMD_PARK_TRIGGER 0x2D
#define MISC_REG 0x30
/* AGC registers */
#define AGC_CTRL 0x50
#define AGC_CLIPPED_PIXS 0x55
#define AGC_BRIGHT_PIXS 0x56
#define AGC_BG_PIXS 0x57
#define AGC_SAFETY_MARGIN 0x17
/* Color Coordinate Adjustment registers */
#define CCA_ENABLE 0x5E
#define CCA_C1A 0x5F
#define CCA_C1B 0x60
#define CCA_C1C 0x61
#define CCA_C2A 0x62
#define CCA_C2B 0x63
#define CCA_C2C 0x64
#define CCA_C3A 0x65
#define CCA_C3B 0x66
#define CCA_C3C 0x67
#define CCA_C7A 0x71
#define CCA_C7B 0x72
#define CCA_C7C 0x73
/**
* DLP Pico Processor 2600 comes with flash
* We can do DMA operations from flash for accessing Look Up Tables
*/
#define DMA_STATUS 0x100
#define FLASH_ADDR_BYTES 0x74
#define FLASH_DUMMY_BYTES 0x75
#define FLASH_WRITE_BYTES 0x76
#define FLASH_READ_BYTES 0x77
#define FLASH_OPCODE 0x78
#define FLASH_START_ADDR 0x79
#define FLASH_DUMMY2 0x7A
#define FLASH_WRITE_DATA 0x7B
#define TEMPORAL_DITH_DISABLE 0x7E
#define SEQ_CONTROL 0x82
#define SEQ_VECTOR 0x83
/* DMD is Digital Micromirror Device */
#define DMD_BLOCK_COUNT 0x84
#define DMD_VCC_CONTROL 0x86
#define DMD_PARK_PULSE_COUNT 0x87
#define DMD_PARK_PULSE_WIDTH 0x88
#define DMD_PARK_DELAY 0x89
#define DMD_SHADOW_ENABLE 0x8E
#define SEQ_STATUS 0x8F
#define FLASH_CLOCK_CONTROL 0x98
#define DMD_PARK 0x2D
#define SDRAM_BIST_ENABLE 0x46
#define DDR_DRIVER_STRENGTH 0x9A
#define SDC_ENABLE 0x9D
#define SDC_BUFF_SWAP_DISABLE 0xA3
#define CURTAIN_CONTROL 0xA6
#define DDR_BUS_SWAP_ENABLE 0xA7
#define DMD_TRC_ENABLE 0xA8
#define DMD_BUS_SWAP_ENABLE 0xA9
#define ACTGEN_ENABLE 0xAE
#define ACTGEN_CONTROL 0xAF
#define ACTGEN_HORIZ_BP 0xB0
#define ACTGEN_VERT_BP 0xB1
/* Look Up Table access */
#define CMT_SPLASH_LUT_START_ADDR 0xFA
#define CMT_SPLASH_LUT_DEST_SELECT 0xFB
#define CMT_SPLASH_LUT_DATA 0xFC
#define SEQ_RESET_LUT_START_ADDR 0xFD
#define SEQ_RESET_LUT_DEST_SELECT 0xFE
#define SEQ_RESET_LUT_DATA 0xFF
/* Input source definitions */
#define PARALLEL_RGB 0
#define INT_TEST_PATTERN 1
#define SPLASH_SCREEN 2
#define CPU_INTF 3
#define BT656 4
/* Standard input resolution definitions */
#define QWVGA_LANDSCAPE 3 /* (427h*240v) */
#define WVGA_864_LANDSCAPE 21 /* (864h*480v) */
#define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */
/* Standard data format definitions */
#define RGB565 0
#define RGB666 1
#define RGB888 2
/* Test Pattern definitions */
#define TPG_CHECKERBOARD 0
#define TPG_BLACK 1
#define TPG_WHITE 2
#define TPG_RED 3
#define TPG_BLUE 4
#define TPG_GREEN 5
#define TPG_VLINES_BLACK 6
#define TPG_HLINES_BLACK 7
#define TPG_VLINES_ALT 8
#define TPG_HLINES_ALT 9
#define TPG_DIAG_LINES 10
#define TPG_GREYRAMP_VERT 11
#define TPG_GREYRAMP_HORIZ 12
#define TPG_ANSI_CHECKERBOARD 13
/* sequence mode definitions */
#define SEQ_FREE_RUN 0
#define SEQ_LOCK 1
/* curtain color definitions */
#define CURTAIN_BLACK 0
#define CURTAIN_RED 1
#define CURTAIN_GREEN 2
#define CURTAIN_BLUE 3
#define CURTAIN_YELLOW 4
#define CURTAIN_MAGENTA 5
#define CURTAIN_CYAN 6
#define CURTAIN_WHITE 7
/* LUT definitions */
#define CMT_LUT_NONE 0
#define CMT_LUT_GREEN 1
#define CMT_LUT_RED 2
#define CMT_LUT_BLUE 3
#define CMT_LUT_ALL 4
#define SPLASH_LUT 5
#define SEQ_LUT_NONE 0
#define SEQ_DRC_LUT_0 1
#define SEQ_DRC_LUT_1 2
#define SEQ_DRC_LUT_2 3
#define SEQ_DRC_LUT_3 4
#define SEQ_SEQ_LUT 5
#define SEQ_DRC_LUT_ALL 6
#define WPC_PROGRAM_LUT 7
#define BITSTREAM_START_ADDR 0x00000000
#define BITSTREAM_SIZE 0x00040000
#define WPC_FW_0_START_ADDR 0x00040000
#define WPC_FW_0_SIZE 0x00000ce8
#define SEQUENCE_0_START_ADDR 0x00044000
#define SEQUENCE_0_SIZE 0x00001000
#define SEQUENCE_1_START_ADDR 0x00045000
#define SEQUENCE_1_SIZE 0x00000d10
#define SEQUENCE_2_START_ADDR 0x00046000
#define SEQUENCE_2_SIZE 0x00000d10
#define SEQUENCE_3_START_ADDR 0x00047000
#define SEQUENCE_3_SIZE 0x00000d10
#define SEQUENCE_4_START_ADDR 0x00048000
#define SEQUENCE_4_SIZE 0x00000d10
#define SEQUENCE_5_START_ADDR 0x00049000
#define SEQUENCE_5_SIZE 0x00000d10
#define SEQUENCE_6_START_ADDR 0x0004a000
#define SEQUENCE_6_SIZE 0x00000d10
#define CMT_LUT_0_START_ADDR 0x0004b200
#define CMT_LUT_0_SIZE 0x00000600
#define CMT_LUT_1_START_ADDR 0x0004b800
#define CMT_LUT_1_SIZE 0x00000600
#define CMT_LUT_2_START_ADDR 0x0004be00
#define CMT_LUT_2_SIZE 0x00000600
#define CMT_LUT_3_START_ADDR 0x0004c400
#define CMT_LUT_3_SIZE 0x00000600
#define CMT_LUT_4_START_ADDR 0x0004ca00
#define CMT_LUT_4_SIZE 0x00000600
#define CMT_LUT_5_START_ADDR 0x0004d000
#define CMT_LUT_5_SIZE 0x00000600
#define CMT_LUT_6_START_ADDR 0x0004d600
#define CMT_LUT_6_SIZE 0x00000600
#define DRC_TABLE_0_START_ADDR 0x0004dc00
#define DRC_TABLE_0_SIZE 0x00000100
#define SPLASH_0_START_ADDR 0x0004dd00
#define SPLASH_0_SIZE 0x00032280
#define SEQUENCE_7_START_ADDR 0x00080000
#define SEQUENCE_7_SIZE 0x00000d10
#define SEQUENCE_8_START_ADDR 0x00081800
#define SEQUENCE_8_SIZE 0x00000d10
#define SEQUENCE_9_START_ADDR 0x00083000
#define SEQUENCE_9_SIZE 0x00000d10
#define CMT_LUT_7_START_ADDR 0x0008e000
#define CMT_LUT_7_SIZE 0x00000600
#define CMT_LUT_8_START_ADDR 0x0008e800
#define CMT_LUT_8_SIZE 0x00000600
#define CMT_LUT_9_START_ADDR 0x0008f000
#define CMT_LUT_9_SIZE 0x00000600
#define SPLASH_1_START_ADDR 0x0009a000
#define SPLASH_1_SIZE 0x00032280
#define SPLASH_2_START_ADDR 0x000cd000
#define SPLASH_2_SIZE 0x00032280
#define SPLASH_3_START_ADDR 0x00100000
#define SPLASH_3_SIZE 0x00032280
#define OPT_SPLASH_0_START_ADDR 0x00134000
#define OPT_SPLASH_0_SIZE 0x000cb100
#endif

198
drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
View File

@ -1,198 +0,0 @@
/*
* LCD panel driver for Sharp LS037V7DW01
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
static struct omap_video_timings sharp_ls_timings = {
.x_res = 480,
.y_res = 640,
.pixel_clock = 19200,
.hsw = 2,
.hfp = 1,
.hbp = 28,
.vsw = 1,
.vfp = 1,
.vbp = 1,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
static inline struct panel_sharp_ls037v7dw01_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_sharp_ls037v7dw01_data *) dssdev->data;
}
static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
int r;
if (!pd)
return -EINVAL;
dssdev->panel.timings = sharp_ls_timings;
if (gpio_is_valid(pd->mo_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->mo_gpio,
GPIOF_OUT_INIT_LOW, "lcd MO");
if (r)
return r;
}
if (gpio_is_valid(pd->lr_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->lr_gpio,
GPIOF_OUT_INIT_HIGH, "lcd LR");
if (r)
return r;
}
if (gpio_is_valid(pd->ud_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->ud_gpio,
GPIOF_OUT_INIT_HIGH, "lcd UD");
if (r)
return r;
}
if (gpio_is_valid(pd->resb_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->resb_gpio,
GPIOF_OUT_INIT_LOW, "lcd RESB");
if (r)
return r;
}
if (gpio_is_valid(pd->ini_gpio)) {
r = devm_gpio_request_one(dssdev->dev, pd->ini_gpio,
GPIOF_OUT_INIT_LOW, "lcd INI");
if (r)
return r;
}
return 0;
}
static void __exit sharp_ls_panel_remove(struct omap_dss_device *dssdev)
{
}
static int sharp_ls_power_on(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
int r = 0;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 1);
if (gpio_is_valid(pd->ini_gpio))
gpio_set_value_cansleep(pd->ini_gpio, 1);
return 0;
err0:
return r;
}
static void sharp_ls_power_off(struct omap_dss_device *dssdev)
{
struct panel_sharp_ls037v7dw01_data *pd = get_panel_data(dssdev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (gpio_is_valid(pd->ini_gpio))
gpio_set_value_cansleep(pd->ini_gpio, 0);
if (gpio_is_valid(pd->resb_gpio))
gpio_set_value_cansleep(pd->resb_gpio, 0);
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
omapdss_dpi_display_disable(dssdev);
}
static int sharp_ls_panel_enable(struct omap_dss_device *dssdev)
{
int r;
r = sharp_ls_power_on(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return r;
}
static void sharp_ls_panel_disable(struct omap_dss_device *dssdev)
{
sharp_ls_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static struct omap_dss_driver sharp_ls_driver = {
.probe = sharp_ls_panel_probe,
.remove = __exit_p(sharp_ls_panel_remove),
.enable = sharp_ls_panel_enable,
.disable = sharp_ls_panel_disable,
.driver = {
.name = "sharp_ls_panel",
.owner = THIS_MODULE,
},
};
static int __init sharp_ls_panel_drv_init(void)
{
return omap_dss_register_driver(&sharp_ls_driver);
}
static void __exit sharp_ls_panel_drv_exit(void)
{
omap_dss_unregister_driver(&sharp_ls_driver);
}
module_init(sharp_ls_panel_drv_init);
module_exit(sharp_ls_panel_drv_exit);
MODULE_LICENSE("GPL");

1551
drivers/video/omap2/displays/panel-taal.c
View File

File diff suppressed because it is too large Load Diff

353
drivers/video/omap2/displays/panel-tfp410.c
View File

@ -1,353 +0,0 @@
/*
* TFP410 DPI-to-DVI chip
*
* Copyright (C) 2011 Texas Instruments Inc
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <video/omapdss.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <drm/drm_edid.h>
#include <video/omap-panel-data.h>
static const struct omap_video_timings tfp410_default_timings = {
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
.vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
struct panel_drv_data {
struct omap_dss_device *dssdev;
struct mutex lock;
int pd_gpio;
struct i2c_adapter *i2c_adapter;
};
static int tfp410_power_on(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (gpio_is_valid(ddata->pd_gpio))
gpio_set_value_cansleep(ddata->pd_gpio, 1);
return 0;
err0:
return r;
}
static void tfp410_power_off(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (gpio_is_valid(ddata->pd_gpio))
gpio_set_value_cansleep(ddata->pd_gpio, 0);
omapdss_dpi_display_disable(dssdev);
}
static int tfp410_probe(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata;
int r;
int i2c_bus_num;
ddata = devm_kzalloc(dssdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
dssdev->panel.timings = tfp410_default_timings;
ddata->dssdev = dssdev;
mutex_init(&ddata->lock);
if (dssdev->data) {
struct tfp410_platform_data *pdata = dssdev->data;
ddata->pd_gpio = pdata->power_down_gpio;
i2c_bus_num = pdata->i2c_bus_num;
} else {
ddata->pd_gpio = -1;
i2c_bus_num = -1;
}
if (gpio_is_valid(ddata->pd_gpio)) {
r = devm_gpio_request_one(dssdev->dev, ddata->pd_gpio,
GPIOF_OUT_INIT_LOW, "tfp410 pd");
if (r) {
dev_err(dssdev->dev, "Failed to request PD GPIO %d\n",
ddata->pd_gpio);
return r;
}
}
if (i2c_bus_num != -1) {
struct i2c_adapter *adapter;
adapter = i2c_get_adapter(i2c_bus_num);
if (!adapter) {
dev_err(dssdev->dev, "Failed to get I2C adapter, bus %d\n",
i2c_bus_num);
return -EPROBE_DEFER;
}
ddata->i2c_adapter = adapter;
}
dev_set_drvdata(dssdev->dev, ddata);
return 0;
}
static void __exit tfp410_remove(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
mutex_lock(&ddata->lock);
if (ddata->i2c_adapter)
i2c_put_adapter(ddata->i2c_adapter);
dev_set_drvdata(dssdev->dev, NULL);
mutex_unlock(&ddata->lock);
}
static int tfp410_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
int r;
mutex_lock(&ddata->lock);
r = tfp410_power_on(dssdev);
if (r == 0)
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&ddata->lock);
return r;
}
static void tfp410_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
mutex_lock(&ddata->lock);
tfp410_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&ddata->lock);
}
static void tfp410_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
mutex_lock(&ddata->lock);
omapdss_dpi_set_timings(dssdev, timings);
dssdev->panel.timings = *timings;
mutex_unlock(&ddata->lock);
}
static void tfp410_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
mutex_lock(&ddata->lock);
*timings = dssdev->panel.timings;
mutex_unlock(&ddata->lock);
}
static int tfp410_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
int r;
mutex_lock(&ddata->lock);
r = dpi_check_timings(dssdev, timings);
mutex_unlock(&ddata->lock);
return r;
}
static int tfp410_ddc_read(struct i2c_adapter *adapter,
unsigned char *buf, u16 count, u8 offset)
{
int r, retries;
for (retries = 3; retries > 0; retries--) {
struct i2c_msg msgs[] = {
{
.addr = DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &offset,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = count,
.buf = buf,
}
};
r = i2c_transfer(adapter, msgs, 2);
if (r == 2)
return 0;
if (r != -EAGAIN)
break;
}
return r < 0 ? r : -EIO;
}
static int tfp410_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
int r, l, bytes_read;
mutex_lock(&ddata->lock);
if (!ddata->i2c_adapter) {
r = -ENODEV;
goto err;
}
l = min(EDID_LENGTH, len);
r = tfp410_ddc_read(ddata->i2c_adapter, edid, l, 0);
if (r)
goto err;
bytes_read = l;
/* if there are extensions, read second block */
if (len > EDID_LENGTH && edid[0x7e] > 0) {
l = min(EDID_LENGTH, len - EDID_LENGTH);
r = tfp410_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
l, EDID_LENGTH);
if (r)
goto err;
bytes_read += l;
}
mutex_unlock(&ddata->lock);
return bytes_read;
err:
mutex_unlock(&ddata->lock);
return r;
}
static bool tfp410_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
unsigned char out;
int r;
mutex_lock(&ddata->lock);
if (!ddata->i2c_adapter)
goto out;
r = tfp410_ddc_read(ddata->i2c_adapter, &out, 1, 0);
mutex_unlock(&ddata->lock);
return r == 0;
out:
mutex_unlock(&ddata->lock);
return true;
}
static struct omap_dss_driver tfp410_driver = {
.probe = tfp410_probe,
.remove = __exit_p(tfp410_remove),
.enable = tfp410_enable,
.disable = tfp410_disable,
.set_timings = tfp410_set_timings,
.get_timings = tfp410_get_timings,
.check_timings = tfp410_check_timings,
.read_edid = tfp410_read_edid,
.detect = tfp410_detect,
.driver = {
.name = "tfp410",
.owner = THIS_MODULE,
},
};
static int __init tfp410_init(void)
{
return omap_dss_register_driver(&tfp410_driver);
}
static void __exit tfp410_exit(void)
{
omap_dss_unregister_driver(&tfp410_driver);
}
module_init(tfp410_init);
module_exit(tfp410_exit);
MODULE_LICENSE("GPL");

596
drivers/video/omap2/displays/panel-tpo-td043mtea1.c
View File

@ -1,596 +0,0 @@
/*
* LCD panel driver for TPO TD043MTEA1
*
* Author: Gražvydas Ignotas <notasas@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#define TPO_R02_MODE(x) ((x) & 7)
#define TPO_R02_MODE_800x480 7
#define TPO_R02_NCLK_RISING BIT(3)
#define TPO_R02_HSYNC_HIGH BIT(4)
#define TPO_R02_VSYNC_HIGH BIT(5)
#define TPO_R03_NSTANDBY BIT(0)
#define TPO_R03_EN_CP_CLK BIT(1)
#define TPO_R03_EN_VGL_PUMP BIT(2)
#define TPO_R03_EN_PWM BIT(3)
#define TPO_R03_DRIVING_CAP_100 BIT(4)
#define TPO_R03_EN_PRE_CHARGE BIT(6)
#define TPO_R03_SOFTWARE_CTL BIT(7)
#define TPO_R04_NFLIP_H BIT(0)
#define TPO_R04_NFLIP_V BIT(1)
#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
#define TPO_R04_VGL_FREQ_1H BIT(4)
#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
TPO_R03_SOFTWARE_CTL)
#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
static const u16 tpo_td043_def_gamma[12] = {
105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
};
struct tpo_td043_device {
struct spi_device *spi;
struct regulator *vcc_reg;
int nreset_gpio;
u16 gamma[12];
u32 mode;
u32 hmirror:1;
u32 vmirror:1;
u32 powered_on:1;
u32 spi_suspended:1;
u32 power_on_resume:1;
};
/* used to pass spi_device from SPI to DSS portion of the driver */
static struct tpo_td043_device *g_tpo_td043;
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
{
struct spi_message m;
struct spi_transfer xfer;
u16 w;
int r;
spi_message_init(&m);
memset(&xfer, 0, sizeof(xfer));
w = ((u16)addr << 10) | (1 << 8) | data;
xfer.tx_buf = &w;
xfer.bits_per_word = 16;
xfer.len = 2;
spi_message_add_tail(&xfer, &m);
r = spi_sync(spi, &m);
if (r < 0)
dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
return r;
}
static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
{
u8 i, val;
/* gamma bits [9:8] */
for (val = i = 0; i < 4; i++)
val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x11, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x12, val);
for (val = i = 0; i < 4; i++)
val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
tpo_td043_write(spi, 0x13, val);
/* gamma bits [7:0] */
for (val = i = 0; i < 12; i++)
tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
}
static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
{
u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V | \
TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
if (h)
reg4 &= ~TPO_R04_NFLIP_H;
if (v)
reg4 &= ~TPO_R04_NFLIP_V;
return tpo_td043_write(spi, 4, reg4);
}
static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
tpo_td043->hmirror = enable;
return tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
tpo_td043->vmirror);
}
static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
return tpo_td043->hmirror;
}
static ssize_t tpo_td043_vmirror_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->vmirror);
}
static ssize_t tpo_td043_vmirror_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
int val;
int ret;
ret = kstrtoint(buf, 0, &val);
if (ret < 0)
return ret;
val = !!val;
ret = tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror, val);
if (ret < 0)
return ret;
tpo_td043->vmirror = val;
return count;
}
static ssize_t tpo_td043_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%d\n", tpo_td043->mode);
}
static ssize_t tpo_td043_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
long val;
int ret;
ret = kstrtol(buf, 0, &val);
if (ret != 0 || val & ~7)
return -EINVAL;
tpo_td043->mode = val;
val |= TPO_R02_NCLK_RISING;
tpo_td043_write(tpo_td043->spi, 2, val);
return count;
}
static ssize_t tpo_td043_gamma_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
ssize_t len = 0;
int ret;
int i;
for (i = 0; i < ARRAY_SIZE(tpo_td043->gamma); i++) {
ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
tpo_td043->gamma[i]);
if (ret < 0)
return ret;
len += ret;
}
buf[len - 1] = '\n';
return len;
}
static ssize_t tpo_td043_gamma_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
unsigned int g[12];
int ret;
int i;
ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
if (ret != 12)
return -EINVAL;
for (i = 0; i < 12; i++)
tpo_td043->gamma[i] = g[i];
tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
return count;
}
static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
tpo_td043_vmirror_show, tpo_td043_vmirror_store);
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
tpo_td043_mode_show, tpo_td043_mode_store);
static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
tpo_td043_gamma_show, tpo_td043_gamma_store);
static struct attribute *tpo_td043_attrs[] = {
&dev_attr_vmirror.attr,
&dev_attr_mode.attr,
&dev_attr_gamma.attr,
NULL,
};
static struct attribute_group tpo_td043_attr_group = {
.attrs = tpo_td043_attrs,
};
static const struct omap_video_timings tpo_td043_timings = {
.x_res = 800,
.y_res = 480,
.pixel_clock = 36000,
.hsw = 1,
.hfp = 68,
.hbp = 214,
.vsw = 1,
.vfp = 39,
.vbp = 34,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
.de_level = OMAPDSS_SIG_ACTIVE_HIGH,
.sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
};
static inline struct panel_tpo_td043_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_tpo_td043_data *) dssdev->data;
}
static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
{
int r;
if (tpo_td043->powered_on)
return 0;
r = regulator_enable(tpo_td043->vcc_reg);
if (r != 0)
return r;
/* wait for panel to stabilize */
msleep(160);
if (gpio_is_valid(tpo_td043->nreset_gpio))
gpio_set_value(tpo_td043->nreset_gpio, 1);
tpo_td043_write(tpo_td043->spi, 2,
TPO_R02_MODE(tpo_td043->mode) | TPO_R02_NCLK_RISING);
tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_NORMAL);
tpo_td043_write(tpo_td043->spi, 0x20, 0xf0);
tpo_td043_write(tpo_td043->spi, 0x21, 0xf0);
tpo_td043_write_mirror(tpo_td043->spi, tpo_td043->hmirror,
tpo_td043->vmirror);
tpo_td043_write_gamma(tpo_td043->spi, tpo_td043->gamma);
tpo_td043->powered_on = 1;
return 0;
}
static void tpo_td043_power_off(struct tpo_td043_device *tpo_td043)
{
if (!tpo_td043->powered_on)
return;
tpo_td043_write(tpo_td043->spi, 3,
TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
if (gpio_is_valid(tpo_td043->nreset_gpio))
gpio_set_value(tpo_td043->nreset_gpio, 0);
/* wait for at least 2 vsyncs before cutting off power */
msleep(50);
tpo_td043_write(tpo_td043->spi, 3, TPO_R03_VAL_STANDBY);
regulator_disable(tpo_td043->vcc_reg);
tpo_td043->powered_on = 0;
}
static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
omapdss_dpi_set_data_lines(dssdev, dssdev->phy.dpi.data_lines);
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/*
* If we are resuming from system suspend, SPI clocks might not be
* enabled yet, so we'll program the LCD from SPI PM resume callback.
*/
if (!tpo_td043->spi_suspended) {
r = tpo_td043_power_on(tpo_td043);
if (r)
goto err1;
}
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void tpo_td043_disable_dss(struct omap_dss_device *dssdev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
omapdss_dpi_display_disable(dssdev);
if (!tpo_td043->spi_suspended)
tpo_td043_power_off(tpo_td043);
}
static int tpo_td043_enable(struct omap_dss_device *dssdev)
{
dev_dbg(dssdev->dev, "enable\n");
return tpo_td043_enable_dss(dssdev);
}
static void tpo_td043_disable(struct omap_dss_device *dssdev)
{
dev_dbg(dssdev->dev, "disable\n");
tpo_td043_disable_dss(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int tpo_td043_probe(struct omap_dss_device *dssdev)
{
struct tpo_td043_device *tpo_td043 = g_tpo_td043;
struct panel_tpo_td043_data *pdata = get_panel_data(dssdev);
int ret = 0;
dev_dbg(dssdev->dev, "probe\n");
if (tpo_td043 == NULL) {
dev_err(dssdev->dev, "missing tpo_td043_device\n");
return -ENODEV;
}
if (!pdata)
return -EINVAL;
tpo_td043->nreset_gpio = pdata->nreset_gpio;
dssdev->panel.timings = tpo_td043_timings;
dssdev->ctrl.pixel_size = 24;
tpo_td043->mode = TPO_R02_MODE_800x480;
memcpy(tpo_td043->gamma, tpo_td043_def_gamma, sizeof(tpo_td043->gamma));
tpo_td043->vcc_reg = regulator_get(dssdev->dev, "vcc");
if (IS_ERR(tpo_td043->vcc_reg)) {
dev_err(dssdev->dev, "failed to get LCD VCC regulator\n");
ret = PTR_ERR(tpo_td043->vcc_reg);
goto fail_regulator;
}
if (gpio_is_valid(tpo_td043->nreset_gpio)) {
ret = devm_gpio_request_one(dssdev->dev,
tpo_td043->nreset_gpio, GPIOF_OUT_INIT_LOW,
"lcd reset");
if (ret < 0) {
dev_err(dssdev->dev, "couldn't request reset GPIO\n");
goto fail_gpio_req;
}
}
ret = sysfs_create_group(&dssdev->dev->kobj, &tpo_td043_attr_group);
if (ret)
dev_warn(dssdev->dev, "failed to create sysfs files\n");
dev_set_drvdata(dssdev->dev, tpo_td043);
return 0;
fail_gpio_req:
regulator_put(tpo_td043->vcc_reg);
fail_regulator:
kfree(tpo_td043);
return ret;
}
static void tpo_td043_remove(struct omap_dss_device *dssdev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dssdev->dev);
dev_dbg(dssdev->dev, "remove\n");
sysfs_remove_group(&dssdev->dev->kobj, &tpo_td043_attr_group);
regulator_put(tpo_td043->vcc_reg);
}
static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
omapdss_dpi_set_timings(dssdev, timings);
dssdev->panel.timings = *timings;
}
static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
return dpi_check_timings(dssdev, timings);
}
static struct omap_dss_driver tpo_td043_driver = {
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
.enable = tpo_td043_enable,
.disable = tpo_td043_disable,
.set_mirror = tpo_td043_set_hmirror,
.get_mirror = tpo_td043_get_hmirror,
.set_timings = tpo_td043_set_timings,
.check_timings = tpo_td043_check_timings,
.driver = {
.name = "tpo_td043mtea1_panel",
.owner = THIS_MODULE,
},
};
static int tpo_td043_spi_probe(struct spi_device *spi)
{
struct omap_dss_device *dssdev = spi->dev.platform_data;
struct tpo_td043_device *tpo_td043;
int ret;
if (dssdev == NULL) {
dev_err(&spi->dev, "missing dssdev\n");
return -ENODEV;
}
if (g_tpo_td043 != NULL)
return -EBUSY;
spi->bits_per_word = 16;
spi->mode = SPI_MODE_0;
ret = spi_setup(spi);
if (ret < 0) {
dev_err(&spi->dev, "spi_setup failed: %d\n", ret);
return ret;
}
tpo_td043 = kzalloc(sizeof(*tpo_td043), GFP_KERNEL);
if (tpo_td043 == NULL)
return -ENOMEM;
tpo_td043->spi = spi;
dev_set_drvdata(&spi->dev, tpo_td043);
g_tpo_td043 = tpo_td043;
omap_dss_register_driver(&tpo_td043_driver);
return 0;
}
static int tpo_td043_spi_remove(struct spi_device *spi)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(&spi->dev);
omap_dss_unregister_driver(&tpo_td043_driver);
kfree(tpo_td043);
g_tpo_td043 = NULL;
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int tpo_td043_spi_suspend(struct device *dev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", tpo_td043);
tpo_td043->power_on_resume = tpo_td043->powered_on;
tpo_td043_power_off(tpo_td043);
tpo_td043->spi_suspended = 1;
return 0;
}
static int tpo_td043_spi_resume(struct device *dev)
{
struct tpo_td043_device *tpo_td043 = dev_get_drvdata(dev);
int ret;
dev_dbg(dev, "tpo_td043_spi_resume\n");
if (tpo_td043->power_on_resume) {
ret = tpo_td043_power_on(tpo_td043);
if (ret)
return ret;
}
tpo_td043->spi_suspended = 0;
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
tpo_td043_spi_suspend, tpo_td043_spi_resume);
static struct spi_driver tpo_td043_spi_driver = {
.driver = {
.name = "tpo_td043mtea1_panel_spi",
.owner = THIS_MODULE,
.pm = &tpo_td043_spi_pm,
},
.probe = tpo_td043_spi_probe,
.remove = tpo_td043_spi_remove,
};
module_spi_driver(tpo_td043_spi_driver);
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
MODULE_LICENSE("GPL");

1
drivers/video/omap2/dss/Kconfig
View File

@ -42,6 +42,7 @@ config OMAP2_DSS_DPI
config OMAP2_DSS_RFBI
bool "RFBI support"
depends on BROKEN
default n
help
MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas

5
drivers/video/omap2/dss/Makefile
View File

@ -7,9 +7,8 @@ omapdss-y += manager.o manager-sysfs.o overlay.o overlay-sysfs.o apply.o \
dispc-compat.o display-sysfs.o
omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o venc_panel.o
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi.o \
hdmi_panel.o ti_hdmi_4xxx_ip.o
omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi.o ti_hdmi_4xxx_ip.o
ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG

4
drivers/video/omap2/dss/apply.c
View File

@ -428,8 +428,8 @@ static struct omap_dss_device *dss_mgr_get_device(struct omap_overlay_manager *m
if (dssdev == NULL)
return NULL;
while (dssdev->device)
dssdev = dssdev->device;
while (dssdev->dst)
dssdev = dssdev->dst;
if (dssdev->driver)
return dssdev;

324
drivers/video/omap2/dss/core.c
View File

@ -43,9 +43,6 @@
static struct {
struct platform_device *pdev;
struct regulator *vdds_dsi_reg;
struct regulator *vdds_sdi_reg;
const char *default_display_name;
} core;
@ -79,36 +76,6 @@ struct platform_device *dss_get_core_pdev(void)
return core.pdev;
}
/* REGULATORS */
struct regulator *dss_get_vdds_dsi(void)
{
struct regulator *reg;
if (core.vdds_dsi_reg != NULL)
return core.vdds_dsi_reg;
reg = devm_regulator_get(&core.pdev->dev, "vdds_dsi");
if (!IS_ERR(reg))
core.vdds_dsi_reg = reg;
return reg;
}
struct regulator *dss_get_vdds_sdi(void)
{
struct regulator *reg;
if (core.vdds_sdi_reg != NULL)
return core.vdds_sdi_reg;
reg = devm_regulator_get(&core.pdev->dev, "vdds_sdi");
if (!IS_ERR(reg))
core.vdds_sdi_reg = reg;
return reg;
}
int dss_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
struct omap_dss_board_info *board_data = core.pdev->dev.platform_data;
@ -281,235 +248,6 @@ static struct platform_driver omap_dss_driver = {
},
};
/* BUS */
static int dss_bus_match(struct device *dev, struct device_driver *driver)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
DSSDBG("bus_match. dev %s/%s, drv %s\n",
dev_name(dev), dssdev->driver_name, driver->name);
return strcmp(dssdev->driver_name, driver->name) == 0;
}
static struct bus_type dss_bus_type = {
.name = "omapdss",
.match = dss_bus_match,
};
static void dss_bus_release(struct device *dev)
{
DSSDBG("bus_release\n");
}
static struct device dss_bus = {
.release = dss_bus_release,
};
struct bus_type *dss_get_bus(void)
{
return &dss_bus_type;
}
/* DRIVER */
static int dss_driver_probe(struct device *dev)
{
int r;
struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
struct omap_dss_device *dssdev = to_dss_device(dev);
DSSDBG("driver_probe: dev %s/%s, drv %s\n",
dev_name(dev), dssdev->driver_name,
dssdrv->driver.name);
r = dssdrv->probe(dssdev);
if (r) {
DSSERR("driver probe failed: %d\n", r);
return r;
}
DSSDBG("probe done for device %s\n", dev_name(dev));
dssdev->driver = dssdrv;
return 0;
}
static int dss_driver_remove(struct device *dev)
{
struct omap_dss_driver *dssdrv = to_dss_driver(dev->driver);
struct omap_dss_device *dssdev = to_dss_device(dev);
DSSDBG("driver_remove: dev %s/%s\n", dev_name(dev),
dssdev->driver_name);
dssdrv->remove(dssdev);
dssdev->driver = NULL;
return 0;
}
static int omapdss_default_connect(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out;
struct omap_overlay_manager *mgr;
int r;
out = dssdev->output;
if (out == NULL)
return -ENODEV;
mgr = omap_dss_get_overlay_manager(out->dispc_channel);
if (!mgr)
return -ENODEV;
r = dss_mgr_connect(mgr, out);
if (r)
return r;
return 0;
}
static void omapdss_default_disconnect(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out;
struct omap_overlay_manager *mgr;
out = dssdev->output;
if (out == NULL)
return;
mgr = out->manager;
if (mgr == NULL)
return;
dss_mgr_disconnect(mgr, out);
}
int omap_dss_register_driver(struct omap_dss_driver *dssdriver)
{
dssdriver->driver.bus = &dss_bus_type;
dssdriver->driver.probe = dss_driver_probe;
dssdriver->driver.remove = dss_driver_remove;
if (dssdriver->get_resolution == NULL)
dssdriver->get_resolution = omapdss_default_get_resolution;
if (dssdriver->get_recommended_bpp == NULL)
dssdriver->get_recommended_bpp =
omapdss_default_get_recommended_bpp;
if (dssdriver->get_timings == NULL)
dssdriver->get_timings = omapdss_default_get_timings;
if (dssdriver->connect == NULL)
dssdriver->connect = omapdss_default_connect;
if (dssdriver->disconnect == NULL)
dssdriver->disconnect = omapdss_default_disconnect;
return driver_register(&dssdriver->driver);
}
EXPORT_SYMBOL(omap_dss_register_driver);
void omap_dss_unregister_driver(struct omap_dss_driver *dssdriver)
{
driver_unregister(&dssdriver->driver);
}
EXPORT_SYMBOL(omap_dss_unregister_driver);
/* DEVICE */
static void omap_dss_dev_release(struct device *dev)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
kfree(dssdev);
}
static int disp_num_counter;
struct omap_dss_device *dss_alloc_and_init_device(struct device *parent)
{
struct omap_dss_device *dssdev;
dssdev = kzalloc(sizeof(*dssdev), GFP_KERNEL);
if (!dssdev)
return NULL;
dssdev->old_dev.bus = &dss_bus_type;
dssdev->old_dev.parent = parent;
dssdev->old_dev.release = omap_dss_dev_release;
dev_set_name(&dssdev->old_dev, "display%d", disp_num_counter++);
device_initialize(&dssdev->old_dev);
return dssdev;
}
int dss_add_device(struct omap_dss_device *dssdev)
{
dssdev->dev = &dssdev->old_dev;
omapdss_register_display(dssdev);
return device_add(&dssdev->old_dev);
}
void dss_put_device(struct omap_dss_device *dssdev)
{
put_device(&dssdev->old_dev);
}
void dss_unregister_device(struct omap_dss_device *dssdev)
{
device_unregister(&dssdev->old_dev);
omapdss_unregister_display(dssdev);
}
static int dss_unregister_dss_dev(struct device *dev, void *data)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
dss_unregister_device(dssdev);
return 0;
}
void dss_unregister_child_devices(struct device *parent)
{
device_for_each_child(parent, NULL, dss_unregister_dss_dev);
}
void dss_copy_device_pdata(struct omap_dss_device *dst,
const struct omap_dss_device *src)
{
u8 *d = (u8 *)dst;
u8 *s = (u8 *)src;
size_t dsize = sizeof(struct device);
memcpy(d + dsize, s + dsize, sizeof(struct omap_dss_device) - dsize);
}
/* BUS */
static int __init omap_dss_bus_register(void)
{
int r;
r = bus_register(&dss_bus_type);
if (r) {
DSSERR("bus register failed\n");
return r;
}
dev_set_name(&dss_bus, "omapdss");
r = device_register(&dss_bus);
if (r) {
DSSERR("bus driver register failed\n");
bus_unregister(&dss_bus_type);
return r;
}
return 0;
}
/* INIT */
static int (*dss_output_drv_reg_funcs[])(void) __initdata = {
#ifdef CONFIG_OMAP2_DSS_DSI
@ -555,7 +293,7 @@ static void (*dss_output_drv_unreg_funcs[])(void) __exitdata = {
static bool dss_output_drv_loaded[ARRAY_SIZE(dss_output_drv_reg_funcs)];
static int __init omap_dss_register_drivers(void)
static int __init omap_dss_init(void)
{
int r;
int i;
@ -586,6 +324,8 @@ static int __init omap_dss_register_drivers(void)
dss_output_drv_loaded[i] = true;
}
dss_initialized = true;
return 0;
err_dispc:
@ -596,7 +336,7 @@ err_dss:
return r;
}
static void __exit omap_dss_unregister_drivers(void)
static void __exit omap_dss_exit(void)
{
int i;
@ -611,64 +351,8 @@ static void __exit omap_dss_unregister_drivers(void)
platform_driver_unregister(&omap_dss_driver);
}
#ifdef CONFIG_OMAP2_DSS_MODULE
static void omap_dss_bus_unregister(void)
{
device_unregister(&dss_bus);
bus_unregister(&dss_bus_type);
}
static int __init omap_dss_init(void)
{
int r;
r = omap_dss_bus_register();
if (r)
return r;
r = omap_dss_register_drivers();
if (r) {
omap_dss_bus_unregister();
return r;
}
dss_initialized = true;
return 0;
}
static void __exit omap_dss_exit(void)
{
omap_dss_unregister_drivers();
omap_dss_bus_unregister();
}
module_init(omap_dss_init);
module_exit(omap_dss_exit);
#else
static int __init omap_dss_init(void)
{
return omap_dss_bus_register();
}
static int __init omap_dss_init2(void)
{
int r;
r = omap_dss_register_drivers();
if (r)
return r;
dss_initialized = true;
return 0;
}
core_initcall(omap_dss_init);
device_initcall(omap_dss_init2);
#endif
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
MODULE_DESCRIPTION("OMAP2/3 Display Subsystem");

121
drivers/video/omap2/dss/dpi.c
View File

@ -345,7 +345,7 @@ static void dpi_config_lcd_manager(struct omap_overlay_manager *mgr)
dss_mgr_set_lcd_config(mgr, &dpi.mgr_config);
}
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev)
static int dpi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &dpi.output;
int r;
@ -423,9 +423,8 @@ err_no_reg:
mutex_unlock(&dpi.lock);
return r;
}
EXPORT_SYMBOL(omapdss_dpi_display_enable);
void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
static void dpi_display_disable(struct omap_dss_device *dssdev)
{
struct omap_overlay_manager *mgr = dpi.output.manager;
@ -446,9 +445,8 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
mutex_unlock(&dpi.lock);
}
EXPORT_SYMBOL(omapdss_dpi_display_disable);
void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
static void dpi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
DSSDBG("dpi_set_timings\n");
@ -459,7 +457,6 @@ void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
mutex_unlock(&dpi.lock);
}
EXPORT_SYMBOL(omapdss_dpi_set_timings);
static void dpi_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
@ -471,7 +468,7 @@ static void dpi_get_timings(struct omap_dss_device *dssdev,
mutex_unlock(&dpi.lock);
}
int dpi_check_timings(struct omap_dss_device *dssdev,
static int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct omap_overlay_manager *mgr = dpi.output.manager;
@ -510,9 +507,8 @@ int dpi_check_timings(struct omap_dss_device *dssdev,
return 0;
}
EXPORT_SYMBOL(dpi_check_timings);
void omapdss_dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
static void dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
{
mutex_lock(&dpi.lock);
@ -520,7 +516,6 @@ void omapdss_dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
mutex_unlock(&dpi.lock);
}
EXPORT_SYMBOL(omapdss_dpi_set_data_lines);
static int dpi_verify_dsi_pll(struct platform_device *dsidev)
{
@ -554,14 +549,10 @@ static int dpi_init_regulator(void)
if (dpi.vdds_dsi_reg)
return 0;
vdds_dsi = dss_get_vdds_dsi();
vdds_dsi = devm_regulator_get(&dpi.pdev->dev, "vdds_dsi");
if (IS_ERR(vdds_dsi)) {
vdds_dsi = devm_regulator_get(&dpi.pdev->dev, "vdds_dsi");
if (IS_ERR(vdds_dsi)) {
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
}
DSSERR("can't get VDDS_DSI regulator\n");
return PTR_ERR(vdds_dsi);
}
dpi.vdds_dsi_reg = vdds_dsi;
@ -618,76 +609,6 @@ static enum omap_channel dpi_get_channel(void)
}
}
static struct omap_dss_device *dpi_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_DPI)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int dpi_probe_pdata(struct platform_device *dpidev)
{
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
int r;
plat_dssdev = dpi_find_dssdev(dpidev);
if (!plat_dssdev)
return 0;
r = dpi_init_regulator();
if (r)
return r;
dpi_init_pll();
dssdev = dss_alloc_and_init_device(&dpidev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
r = omapdss_output_set_device(&dpi.output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&dpi.output);
dss_put_device(dssdev);
return r;
}
return 0;
}
static int dpi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@ -722,9 +643,9 @@ static int dpi_connect(struct omap_dss_device *dssdev,
static void dpi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
@ -737,14 +658,14 @@ static const struct omapdss_dpi_ops dpi_ops = {
.connect = dpi_connect,
.disconnect = dpi_disconnect,
.enable = omapdss_dpi_display_enable,
.disable = omapdss_dpi_display_disable,
.enable = dpi_display_enable,
.disable = dpi_display_disable,
.check_timings = dpi_check_timings,
.set_timings = omapdss_dpi_set_timings,
.set_timings = dpi_set_timings,
.get_timings = dpi_get_timings,
.set_data_lines = omapdss_dpi_set_data_lines,
.set_data_lines = dpi_set_data_lines,
};
static void dpi_init_output(struct platform_device *pdev)
@ -771,31 +692,17 @@ static void __exit dpi_uninit_output(struct platform_device *pdev)
static int omap_dpi_probe(struct platform_device *pdev)
{
int r;
dpi.pdev = pdev;
mutex_init(&dpi.lock);
dpi_init_output(pdev);
if (pdev->dev.platform_data) {
r = dpi_probe_pdata(pdev);
if (r)
goto err_probe;
}
return 0;
err_probe:
dpi_uninit_output(pdev);
return r;
}
static int __exit omap_dpi_remove(struct platform_device *pdev)
{
dss_unregister_child_devices(&pdev->dev);
dpi_uninit_output(pdev);
return 0;

275
drivers/video/omap2/dss/dsi.c
View File

@ -205,6 +205,8 @@ static int dsi_display_init_dispc(struct platform_device *dsidev,
static void dsi_display_uninit_dispc(struct platform_device *dsidev,
struct omap_overlay_manager *mgr);
static int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel);
#define DSI_MAX_NR_ISRS 2
#define DSI_MAX_NR_LANES 5
@ -383,16 +385,7 @@ static inline struct dsi_data *dsi_get_dsidrv_data(struct platform_device *dside
static inline struct platform_device *dsi_get_dsidev_from_dssdev(struct omap_dss_device *dssdev)
{
/* HACK: dssdev can be either the panel device, when using old API, or
* the dsi device itself, when using the new API. So we solve this for
* now by checking the dssdev->id. This will be removed when the old API
* is removed.
*/
if (dssdev->id == OMAP_DSS_OUTPUT_DSI1 ||
dssdev->id == OMAP_DSS_OUTPUT_DSI2)
return to_platform_device(dssdev->dev);
return to_platform_device(dssdev->output->dev);
return to_platform_device(dssdev->dev);
}
struct platform_device *dsi_get_dsidev_from_id(int module)
@ -432,23 +425,21 @@ static inline u32 dsi_read_reg(struct platform_device *dsidev,
return __raw_readl(dsi->base + idx.idx);
}
void dsi_bus_lock(struct omap_dss_device *dssdev)
static void dsi_bus_lock(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
down(&dsi->bus_lock);
}
EXPORT_SYMBOL(dsi_bus_lock);
void dsi_bus_unlock(struct omap_dss_device *dssdev)
static void dsi_bus_unlock(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
up(&dsi->bus_lock);
}
EXPORT_SYMBOL(dsi_bus_unlock);
static bool dsi_bus_is_locked(struct platform_device *dsidev)
{
@ -2713,7 +2704,7 @@ static int dsi_vc_config_source(struct platform_device *dsidev, int channel,
return 0;
}
void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
bool enable)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -2737,7 +2728,6 @@ void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
if (dsi->vm_timings.ddr_clk_always_on && enable)
dsi_vc_send_null(dssdev, channel);
}
EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs);
static void dsi_vc_flush_long_data(struct platform_device *dsidev, int channel)
{
@ -2842,7 +2832,7 @@ static int dsi_vc_send_bta(struct platform_device *dsidev, int channel)
return 0;
}
int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel)
static int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
DECLARE_COMPLETION_ONSTACK(completion);
@ -2885,7 +2875,6 @@ err1:
err0:
return r;
}
EXPORT_SYMBOL(dsi_vc_send_bta_sync);
static inline void dsi_vc_write_long_header(struct platform_device *dsidev,
int channel, u8 data_type, u16 len, u8 ecc)
@ -3011,14 +3000,13 @@ static int dsi_vc_send_short(struct platform_device *dsidev, int channel,
return 0;
}
int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
static int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
return dsi_vc_send_long(dsidev, channel, MIPI_DSI_NULL_PACKET, NULL,
0, 0);
}
EXPORT_SYMBOL(dsi_vc_send_null);
static int dsi_vc_write_nosync_common(struct platform_device *dsidev,
int channel, u8 *data, int len, enum dss_dsi_content_type type)
@ -3050,7 +3038,7 @@ static int dsi_vc_write_nosync_common(struct platform_device *dsidev,
return r;
}
int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
static int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -3058,9 +3046,8 @@ int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
return dsi_vc_write_nosync_common(dsidev, channel, data, len,
DSS_DSI_CONTENT_DCS);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_nosync);
int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
static int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -3068,7 +3055,6 @@ int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
return dsi_vc_write_nosync_common(dsidev, channel, data, len,
DSS_DSI_CONTENT_GENERIC);
}
EXPORT_SYMBOL(dsi_vc_generic_write_nosync);
static int dsi_vc_write_common(struct omap_dss_device *dssdev, int channel,
u8 *data, int len, enum dss_dsi_content_type type)
@ -3099,60 +3085,19 @@ err:
return r;
}
int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
static int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len)
{
return dsi_vc_write_common(dssdev, channel, data, len,
DSS_DSI_CONTENT_DCS);
}
EXPORT_SYMBOL(dsi_vc_dcs_write);
int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
static int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len)
{
return dsi_vc_write_common(dssdev, channel, data, len,
DSS_DSI_CONTENT_GENERIC);
}
EXPORT_SYMBOL(dsi_vc_generic_write);
int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd)
{
return dsi_vc_dcs_write(dssdev, channel, &dcs_cmd, 1);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_0);
int dsi_vc_generic_write_0(struct omap_dss_device *dssdev, int channel)
{
return dsi_vc_generic_write(dssdev, channel, NULL, 0);
}
EXPORT_SYMBOL(dsi_vc_generic_write_0);
int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 param)
{
u8 buf[2];
buf[0] = dcs_cmd;
buf[1] = param;
return dsi_vc_dcs_write(dssdev, channel, buf, 2);
}
EXPORT_SYMBOL(dsi_vc_dcs_write_1);
int dsi_vc_generic_write_1(struct omap_dss_device *dssdev, int channel,
u8 param)
{
return dsi_vc_generic_write(dssdev, channel, &param, 1);
}
EXPORT_SYMBOL(dsi_vc_generic_write_1);
int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
u8 param1, u8 param2)
{
u8 buf[2];
buf[0] = param1;
buf[1] = param2;
return dsi_vc_generic_write(dssdev, channel, buf, 2);
}
EXPORT_SYMBOL(dsi_vc_generic_write_2);
static int dsi_vc_dcs_send_read_request(struct platform_device *dsidev,
int channel, u8 dcs_cmd)
@ -3319,7 +3264,7 @@ err:
return r;
}
int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
static int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *buf, int buflen)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -3348,7 +3293,6 @@ err:
DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n", channel, dcs_cmd);
return r;
}
EXPORT_SYMBOL(dsi_vc_dcs_read);
static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int channel,
u8 *reqdata, int reqlen, u8 *buf, int buflen)
@ -3377,56 +3321,7 @@ static int dsi_vc_generic_read(struct omap_dss_device *dssdev, int channel,
return 0;
}
int dsi_vc_generic_read_0(struct omap_dss_device *dssdev, int channel, u8 *buf,
int buflen)
{
int r;
r = dsi_vc_generic_read(dssdev, channel, NULL, 0, buf, buflen);
if (r) {
DSSERR("dsi_vc_generic_read_0(ch %d) failed\n", channel);
return r;
}
return 0;
}
EXPORT_SYMBOL(dsi_vc_generic_read_0);
int dsi_vc_generic_read_1(struct omap_dss_device *dssdev, int channel, u8 param,
u8 *buf, int buflen)
{
int r;
r = dsi_vc_generic_read(dssdev, channel, &param, 1, buf, buflen);
if (r) {
DSSERR("dsi_vc_generic_read_1(ch %d) failed\n", channel);
return r;
}
return 0;
}
EXPORT_SYMBOL(dsi_vc_generic_read_1);
int dsi_vc_generic_read_2(struct omap_dss_device *dssdev, int channel,
u8 param1, u8 param2, u8 *buf, int buflen)
{
int r;
u8 reqdata[2];
reqdata[0] = param1;
reqdata[1] = param2;
r = dsi_vc_generic_read(dssdev, channel, reqdata, 2, buf, buflen);
if (r) {
DSSERR("dsi_vc_generic_read_2(ch %d) failed\n", channel);
return r;
}
return 0;
}
EXPORT_SYMBOL(dsi_vc_generic_read_2);
int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
static int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
u16 len)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -3434,7 +3329,6 @@ int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
return dsi_vc_send_short(dsidev, channel,
MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, len, 0);
}
EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
static int dsi_enter_ulps(struct platform_device *dsidev)
{
@ -4068,7 +3962,7 @@ static void dsi_proto_timings(struct platform_device *dsidev)
}
}
int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
static int dsi_configure_pins(struct omap_dss_device *dssdev,
const struct omap_dsi_pin_config *pin_cfg)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -4134,9 +4028,8 @@ int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
return 0;
}
EXPORT_SYMBOL(omapdss_dsi_configure_pins);
int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
static int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -4206,9 +4099,8 @@ err_pix_fmt:
err_init_dispc:
return r;
}
EXPORT_SYMBOL(dsi_enable_video_output);
void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
static void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -4229,7 +4121,6 @@ void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel)
dsi_display_uninit_dispc(dsidev, mgr);
}
EXPORT_SYMBOL(dsi_disable_video_output);
static void dsi_update_screen_dispc(struct platform_device *dsidev)
{
@ -4369,7 +4260,7 @@ static void dsi_framedone_irq_callback(void *data)
dsi_handle_framedone(dsidev, 0);
}
int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
static int dsi_update(struct omap_dss_device *dssdev, int channel,
void (*callback)(int, void *), void *data)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -4394,7 +4285,6 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
return 0;
}
EXPORT_SYMBOL(omap_dsi_update);
/* Display funcs */
@ -4589,7 +4479,7 @@ static void dsi_display_uninit_dsi(struct platform_device *dsidev,
dsi_pll_uninit(dsidev, disconnect_lanes);
}
int omapdss_dsi_display_enable(struct omap_dss_device *dssdev)
static int dsi_display_enable(struct omap_dss_device *dssdev)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -4625,9 +4515,8 @@ err_get_dsi:
DSSDBG("dsi_display_enable FAILED\n");
return r;
}
EXPORT_SYMBOL(omapdss_dsi_display_enable);
void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
static void dsi_display_disable(struct omap_dss_device *dssdev,
bool disconnect_lanes, bool enter_ulps)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -4651,9 +4540,8 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
mutex_unlock(&dsi->lock);
}
EXPORT_SYMBOL(omapdss_dsi_display_disable);
int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
static int dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -4661,7 +4549,6 @@ int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
dsi->te_enabled = enable;
return 0;
}
EXPORT_SYMBOL(omapdss_dsi_enable_te);
#ifdef PRINT_VERBOSE_VM_TIMINGS
static void print_dsi_vm(const char *str,
@ -5136,7 +5023,7 @@ static bool dsi_vm_calc(struct dsi_data *dsi,
dsi_vm_calc_pll_cb, ctx);
}
int omapdss_dsi_set_config(struct omap_dss_device *dssdev,
static int dsi_set_config(struct omap_dss_device *dssdev,
const struct omap_dss_dsi_config *config)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
@ -5184,7 +5071,6 @@ err:
return r;
}
EXPORT_SYMBOL(omapdss_dsi_set_config);
/*
* Return a hardcoded channel for the DSI output. This should work for
@ -5235,7 +5121,7 @@ static enum omap_channel dsi_get_channel(int module_id)
}
}
int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel)
static int dsi_request_vc(struct omap_dss_device *dssdev, int *channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -5252,9 +5138,8 @@ int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel)
DSSERR("cannot get VC for display %s", dssdev->name);
return -ENOSPC;
}
EXPORT_SYMBOL(omap_dsi_request_vc);
int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id)
static int dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -5279,9 +5164,8 @@ int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id)
return 0;
}
EXPORT_SYMBOL(omap_dsi_set_vc_id);
void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel)
static void dsi_release_vc(struct omap_dss_device *dssdev, int channel)
{
struct platform_device *dsidev = dsi_get_dsidev_from_dssdev(dssdev);
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
@ -5292,7 +5176,6 @@ void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel)
dsi->vc[channel].vc_id = 0;
}
}
EXPORT_SYMBOL(omap_dsi_release_vc);
void dsi_wait_pll_hsdiv_dispc_active(struct platform_device *dsidev)
{
@ -5348,79 +5231,6 @@ static int dsi_get_clocks(struct platform_device *dsidev)
return 0;
}
static struct omap_dss_device *dsi_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_DSI)
continue;
if (dssdev->phy.dsi.module != dsi->module_id)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int dsi_probe_pdata(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
int r;
plat_dssdev = dsi_find_dssdev(dsidev);
if (!plat_dssdev)
return 0;
r = dsi_regulator_init(dsidev);
if (r)
return r;
dssdev = dss_alloc_and_init_device(&dsidev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
r = omapdss_output_set_device(&dsi->output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&dsi->output);
dss_put_device(dssdev);
return r;
}
return 0;
}
static int dsi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@ -5454,9 +5264,9 @@ static int dsi_connect(struct omap_dss_device *dssdev,
static void dsi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
@ -5472,24 +5282,24 @@ static const struct omapdss_dsi_ops dsi_ops = {
.bus_lock = dsi_bus_lock,
.bus_unlock = dsi_bus_unlock,
.enable = omapdss_dsi_display_enable,
.disable = omapdss_dsi_display_disable,
.enable = dsi_display_enable,
.disable = dsi_display_disable,
.enable_hs = omapdss_dsi_vc_enable_hs,
.enable_hs = dsi_vc_enable_hs,
.configure_pins = omapdss_dsi_configure_pins,
.set_config = omapdss_dsi_set_config,
.configure_pins = dsi_configure_pins,
.set_config = dsi_set_config,
.enable_video_output = dsi_enable_video_output,
.disable_video_output = dsi_disable_video_output,
.update = omap_dsi_update,
.update = dsi_update,
.enable_te = omapdss_dsi_enable_te,
.enable_te = dsi_enable_te,
.request_vc = omap_dsi_request_vc,
.set_vc_id = omap_dsi_set_vc_id,
.release_vc = omap_dsi_release_vc,
.request_vc = dsi_request_vc,
.set_vc_id = dsi_set_vc_id,
.release_vc = dsi_release_vc,
.dcs_write = dsi_vc_dcs_write,
.dcs_write_nosync = dsi_vc_dcs_write_nosync,
@ -5627,12 +5437,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
dsi_init_output(dsidev);
if (dsidev->dev.platform_data) {
r = dsi_probe_pdata(dsidev);
if (r)
goto err_probe;
}
dsi_runtime_put(dsidev);
if (dsi->module_id == 0)
@ -5648,9 +5452,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
#endif
return 0;
err_probe:
dsi_runtime_put(dsidev);
dsi_uninit_output(dsidev);
err_runtime_get:
pm_runtime_disable(&dsidev->dev);
return r;
@ -5662,8 +5463,6 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
WARN_ON(dsi->scp_clk_refcount > 0);
dss_unregister_child_devices(&dsidev->dev);
dsi_uninit_output(dsidev);
pm_runtime_disable(&dsidev->dev);

45
drivers/video/omap2/dss/dss.h
View File

@ -163,22 +163,11 @@ struct platform_device;
/* core */
struct platform_device *dss_get_core_pdev(void);
struct bus_type *dss_get_bus(void);
struct regulator *dss_get_vdds_dsi(void);
struct regulator *dss_get_vdds_sdi(void);
int dss_dsi_enable_pads(int dsi_id, unsigned lane_mask);
void dss_dsi_disable_pads(int dsi_id, unsigned lane_mask);
int dss_set_min_bus_tput(struct device *dev, unsigned long tput);
int dss_debugfs_create_file(const char *name, void (*write)(struct seq_file *));
struct omap_dss_device *dss_alloc_and_init_device(struct device *parent);
int dss_add_device(struct omap_dss_device *dssdev);
void dss_unregister_device(struct omap_dss_device *dssdev);
void dss_unregister_child_devices(struct device *parent);
void dss_put_device(struct omap_dss_device *dssdev);
void dss_copy_device_pdata(struct omap_dss_device *dst,
const struct omap_dss_device *src);
/* display */
int dss_suspend_all_devices(void);
int dss_resume_all_devices(void);
@ -436,44 +425,10 @@ int dispc_wb_setup(const struct omap_dss_writeback_info *wi,
/* VENC */
int venc_init_platform_driver(void) __init;
void venc_uninit_platform_driver(void) __exit;
int omapdss_venc_display_enable(struct omap_dss_device *dssdev);
void omapdss_venc_display_disable(struct omap_dss_device *dssdev);
void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev);
int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss);
void omapdss_venc_set_type(struct omap_dss_device *dssdev,
enum omap_dss_venc_type type);
void omapdss_venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
bool invert_polarity);
int venc_panel_init(void);
void venc_panel_exit(void);
/* HDMI */
int hdmi_init_platform_driver(void) __init;
void hdmi_uninit_platform_driver(void) __exit;
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev);
int omapdss_hdmi_core_enable(struct omap_dss_device *dssdev);
void omapdss_hdmi_core_disable(struct omap_dss_device *dssdev);
void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int omapdss_hdmi_read_edid(u8 *buf, int len);
bool omapdss_hdmi_detect(void);
int hdmi_panel_init(void);
void hdmi_panel_exit(void);
#ifdef CONFIG_OMAP4_DSS_HDMI_AUDIO
int hdmi_audio_enable(void);
void hdmi_audio_disable(void);
int hdmi_audio_start(void);
void hdmi_audio_stop(void);
bool hdmi_mode_has_audio(void);
int hdmi_audio_config(struct omap_dss_audio *audio);
#endif
/* RFBI */
int rfbi_init_platform_driver(void) __init;

307
drivers/video/omap2/dss/hdmi.c
View File

@ -66,10 +66,6 @@ static struct {
struct clk *sys_clk;
struct regulator *vdda_hdmi_dac_reg;
int ct_cp_hpd_gpio;
int ls_oe_gpio;
int hpd_gpio;
bool core_enabled;
struct omap_dss_device output;
@ -353,40 +349,6 @@ static int hdmi_init_regulator(void)
return 0;
}
static int hdmi_init_display(struct omap_dss_device *dssdev)
{
int r;
struct gpio gpios[] = {
{ hdmi.ct_cp_hpd_gpio, GPIOF_OUT_INIT_LOW, "hdmi_ct_cp_hpd" },
{ hdmi.ls_oe_gpio, GPIOF_OUT_INIT_LOW, "hdmi_ls_oe" },
{ hdmi.hpd_gpio, GPIOF_DIR_IN, "hdmi_hpd" },
};
DSSDBG("init_display\n");
dss_init_hdmi_ip_ops(&hdmi.ip_data, omapdss_get_version());
r = hdmi_init_regulator();
if (r)
return r;
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
if (r)
return r;
return 0;
}
static void hdmi_uninit_display(struct omap_dss_device *dssdev)
{
DSSDBG("uninit_display\n");
gpio_free(hdmi.ct_cp_hpd_gpio);
gpio_free(hdmi.ls_oe_gpio);
gpio_free(hdmi.hpd_gpio);
}
static const struct hdmi_config *hdmi_find_timing(
const struct hdmi_config *timings_arr,
int len)
@ -517,17 +479,9 @@ static int hdmi_power_on_core(struct omap_dss_device *dssdev)
{
int r;
if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
gpio_set_value(hdmi.ct_cp_hpd_gpio, 1);
if (gpio_is_valid(hdmi.ls_oe_gpio))
gpio_set_value(hdmi.ls_oe_gpio, 1);
/* wait 300us after CT_CP_HPD for the 5V power output to reach 90% */
udelay(300);
r = regulator_enable(hdmi.vdda_hdmi_dac_reg);
if (r)
goto err_vdac_enable;
return r;
r = hdmi_runtime_get();
if (r)
@ -542,11 +496,7 @@ static int hdmi_power_on_core(struct omap_dss_device *dssdev)
err_runtime_get:
regulator_disable(hdmi.vdda_hdmi_dac_reg);
err_vdac_enable:
if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
if (gpio_is_valid(hdmi.ls_oe_gpio))
gpio_set_value(hdmi.ls_oe_gpio, 0);
return r;
}
@ -556,10 +506,6 @@ static void hdmi_power_off_core(struct omap_dss_device *dssdev)
hdmi_runtime_put();
regulator_disable(hdmi.vdda_hdmi_dac_reg);
if (gpio_is_valid(hdmi.ct_cp_hpd_gpio))
gpio_set_value(hdmi.ct_cp_hpd_gpio, 0);
if (gpio_is_valid(hdmi.ls_oe_gpio))
gpio_set_value(hdmi.ls_oe_gpio, 0);
}
static int hdmi_power_on_full(struct omap_dss_device *dssdev)
@ -640,7 +586,7 @@ static void hdmi_power_off_full(struct omap_dss_device *dssdev)
hdmi_power_off_core(dssdev);
}
int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
static int hdmi_display_check_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct hdmi_cm cm;
@ -654,7 +600,7 @@ int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
}
void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct hdmi_cm cm;
@ -674,7 +620,7 @@ void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev,
mutex_unlock(&hdmi.lock);
}
static void omapdss_hdmi_display_get_timings(struct omap_dss_device *dssdev,
static void hdmi_display_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
const struct hdmi_config *cfg;
@ -704,7 +650,7 @@ static void hdmi_dump_regs(struct seq_file *s)
mutex_unlock(&hdmi.lock);
}
int omapdss_hdmi_read_edid(u8 *buf, int len)
static int read_edid(u8 *buf, int len)
{
int r;
@ -721,24 +667,7 @@ int omapdss_hdmi_read_edid(u8 *buf, int len)
return r;
}
bool omapdss_hdmi_detect(void)
{
int r;
mutex_lock(&hdmi.lock);
r = hdmi_runtime_get();
BUG_ON(r);
r = gpio_get_value(hdmi.hpd_gpio);
hdmi_runtime_put();
mutex_unlock(&hdmi.lock);
return r == 1;
}
int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev)
static int hdmi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &hdmi.output;
int r = 0;
@ -767,7 +696,7 @@ err0:
return r;
}
void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
static void hdmi_display_disable(struct omap_dss_device *dssdev)
{
DSSDBG("Enter hdmi_display_disable\n");
@ -778,7 +707,7 @@ void omapdss_hdmi_display_disable(struct omap_dss_device *dssdev)
mutex_unlock(&hdmi.lock);
}
int omapdss_hdmi_core_enable(struct omap_dss_device *dssdev)
static int hdmi_core_enable(struct omap_dss_device *dssdev)
{
int r = 0;
@ -800,7 +729,7 @@ err0:
return r;
}
void omapdss_hdmi_core_disable(struct omap_dss_device *dssdev)
static void hdmi_core_disable(struct omap_dss_device *dssdev)
{
DSSDBG("Enter omapdss_hdmi_core_disable\n");
@ -927,35 +856,7 @@ int hdmi_compute_acr(u32 sample_freq, u32 *n, u32 *cts)
return 0;
}
int hdmi_audio_enable(void)
{
DSSDBG("audio_enable\n");
return hdmi.ip_data.ops->audio_enable(&hdmi.ip_data);
}
void hdmi_audio_disable(void)
{
DSSDBG("audio_disable\n");
hdmi.ip_data.ops->audio_disable(&hdmi.ip_data);
}
int hdmi_audio_start(void)
{
DSSDBG("audio_start\n");
return hdmi.ip_data.ops->audio_start(&hdmi.ip_data);
}
void hdmi_audio_stop(void)
{
DSSDBG("audio_stop\n");
hdmi.ip_data.ops->audio_stop(&hdmi.ip_data);
}
bool hdmi_mode_has_audio(void)
static bool hdmi_mode_has_audio(void)
{
if (hdmi.ip_data.cfg.cm.mode == HDMI_HDMI)
return true;
@ -963,92 +864,8 @@ bool hdmi_mode_has_audio(void)
return false;
}
int hdmi_audio_config(struct omap_dss_audio *audio)
{
return hdmi.ip_data.ops->audio_config(&hdmi.ip_data, audio);
}
#endif
static struct omap_dss_device *hdmi_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_HDMI)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int hdmi_probe_pdata(struct platform_device *pdev)
{
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
struct omap_dss_hdmi_data *priv;
int r;
plat_dssdev = hdmi_find_dssdev(pdev);
if (!plat_dssdev)
return 0;
dssdev = dss_alloc_and_init_device(&pdev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
priv = dssdev->data;
hdmi.ct_cp_hpd_gpio = priv->ct_cp_hpd_gpio;
hdmi.ls_oe_gpio = priv->ls_oe_gpio;
hdmi.hpd_gpio = priv->hpd_gpio;
r = hdmi_init_display(dssdev);
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
dss_put_device(dssdev);
return r;
}
r = omapdss_output_set_device(&hdmi.output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&hdmi.output);
hdmi_uninit_display(dssdev);
dss_put_device(dssdev);
return r;
}
return 0;
}
static int hdmi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@ -1083,9 +900,9 @@ static int hdmi_connect(struct omap_dss_device *dssdev,
static void hdmi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
@ -1103,21 +920,21 @@ static int hdmi_read_edid(struct omap_dss_device *dssdev,
need_enable = hdmi.core_enabled == false;
if (need_enable) {
r = omapdss_hdmi_core_enable(dssdev);
r = hdmi_core_enable(dssdev);
if (r)
return r;
}
r = omapdss_hdmi_read_edid(edid, len);
r = read_edid(edid, len);
if (need_enable)
omapdss_hdmi_core_disable(dssdev);
hdmi_core_disable(dssdev);
return r;
}
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
static int omapdss_hdmi_audio_enable(struct omap_dss_device *dssdev)
static int hdmi_audio_enable(struct omap_dss_device *dssdev)
{
int r;
@ -1128,7 +945,8 @@ static int omapdss_hdmi_audio_enable(struct omap_dss_device *dssdev)
goto err;
}
r = hdmi_audio_enable();
r = hdmi.ip_data.ops->audio_enable(&hdmi.ip_data);
if (r)
goto err;
@ -1140,22 +958,22 @@ err:
return r;
}
static void omapdss_hdmi_audio_disable(struct omap_dss_device *dssdev)
static void hdmi_audio_disable(struct omap_dss_device *dssdev)
{
hdmi_audio_disable();
hdmi.ip_data.ops->audio_disable(&hdmi.ip_data);
}
static int omapdss_hdmi_audio_start(struct omap_dss_device *dssdev)
static int hdmi_audio_start(struct omap_dss_device *dssdev)
{
return hdmi_audio_start();
return hdmi.ip_data.ops->audio_start(&hdmi.ip_data);
}
static void omapdss_hdmi_audio_stop(struct omap_dss_device *dssdev)
static void hdmi_audio_stop(struct omap_dss_device *dssdev)
{
hdmi_audio_stop();
hdmi.ip_data.ops->audio_stop(&hdmi.ip_data);
}
static bool omapdss_hdmi_audio_supported(struct omap_dss_device *dssdev)
static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
{
bool r;
@ -1167,7 +985,7 @@ static bool omapdss_hdmi_audio_supported(struct omap_dss_device *dssdev)
return r;
}
static int omapdss_hdmi_audio_config(struct omap_dss_device *dssdev,
static int hdmi_audio_config(struct omap_dss_device *dssdev,
struct omap_dss_audio *audio)
{
int r;
@ -1179,7 +997,7 @@ static int omapdss_hdmi_audio_config(struct omap_dss_device *dssdev,
goto err;
}
r = hdmi_audio_config(audio);
r = hdmi.ip_data.ops->audio_config(&hdmi.ip_data, audio);
if (r)
goto err;
@ -1191,30 +1009,30 @@ err:
return r;
}
#else
static int omapdss_hdmi_audio_enable(struct omap_dss_device *dssdev)
static int hdmi_audio_enable(struct omap_dss_device *dssdev)
{
return -EPERM;
}
static void omapdss_hdmi_audio_disable(struct omap_dss_device *dssdev)
static void hdmi_audio_disable(struct omap_dss_device *dssdev)
{
}
static int omapdss_hdmi_audio_start(struct omap_dss_device *dssdev)
static int hdmi_audio_start(struct omap_dss_device *dssdev)
{
return -EPERM;
}
static void omapdss_hdmi_audio_stop(struct omap_dss_device *dssdev)
static void hdmi_audio_stop(struct omap_dss_device *dssdev)
{
}
static bool omapdss_hdmi_audio_supported(struct omap_dss_device *dssdev)
static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
{
return false;
}
static int omapdss_hdmi_audio_config(struct omap_dss_device *dssdev,
static int hdmi_audio_config(struct omap_dss_device *dssdev,
struct omap_dss_audio *audio)
{
return -EPERM;
@ -1225,21 +1043,21 @@ static const struct omapdss_hdmi_ops hdmi_ops = {
.connect = hdmi_connect,
.disconnect = hdmi_disconnect,
.enable = omapdss_hdmi_display_enable,
.disable = omapdss_hdmi_display_disable,
.enable = hdmi_display_enable,
.disable = hdmi_display_disable,
.check_timings = omapdss_hdmi_display_check_timing,
.set_timings = omapdss_hdmi_display_set_timing,
.get_timings = omapdss_hdmi_display_get_timings,
.check_timings = hdmi_display_check_timing,
.set_timings = hdmi_display_set_timing,
.get_timings = hdmi_display_get_timings,
.read_edid = hdmi_read_edid,
.audio_enable = omapdss_hdmi_audio_enable,
.audio_disable = omapdss_hdmi_audio_disable,
.audio_start = omapdss_hdmi_audio_start,
.audio_stop = omapdss_hdmi_audio_stop,
.audio_supported = omapdss_hdmi_audio_supported,
.audio_config = omapdss_hdmi_audio_config,
.audio_enable = hdmi_audio_enable,
.audio_disable = hdmi_audio_disable,
.audio_start = hdmi_audio_start,
.audio_stop = hdmi_audio_stop,
.audio_supported = hdmi_audio_supported,
.audio_config = hdmi_audio_config,
};
static void hdmi_init_output(struct platform_device *pdev)
@ -1301,50 +1119,15 @@ static int omapdss_hdmihw_probe(struct platform_device *pdev)
hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
hdmi.ip_data.phy_offset = HDMI_PHY;
hdmi.ct_cp_hpd_gpio = -1;
hdmi.ls_oe_gpio = -1;
hdmi.hpd_gpio = -1;
hdmi_init_output(pdev);
r = hdmi_panel_init();
if (r) {
DSSERR("can't init panel\n");
return r;
}
dss_debugfs_create_file("hdmi", hdmi_dump_regs);
if (pdev->dev.platform_data) {
r = hdmi_probe_pdata(pdev);
if (r)
goto err_probe;
}
return 0;
err_probe:
hdmi_panel_exit();
hdmi_uninit_output(pdev);
pm_runtime_disable(&pdev->dev);
return r;
}
static int __exit hdmi_remove_child(struct device *dev, void *data)
{
struct omap_dss_device *dssdev = to_dss_device(dev);
hdmi_uninit_display(dssdev);
return 0;
}
static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
{
device_for_each_child(&pdev->dev, NULL, hdmi_remove_child);
dss_unregister_child_devices(&pdev->dev);
hdmi_panel_exit();
hdmi_uninit_output(pdev);
pm_runtime_disable(&pdev->dev);

414
drivers/video/omap2/dss/hdmi_panel.c
View File

@ -1,414 +0,0 @@
/*
* hdmi_panel.c
*
* HDMI library support functions for TI OMAP4 processors.
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
* Authors: Mythri P k <mythripk@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <video/omapdss.h>
#include <linux/slab.h>
#include "dss.h"
static struct {
/* This protects the panel ops, mainly when accessing the HDMI IP. */
struct mutex lock;
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
/* This protects the audio ops, specifically. */
spinlock_t audio_lock;
#endif
} hdmi;
static int hdmi_panel_probe(struct omap_dss_device *dssdev)
{
/* Initialize default timings to VGA in DVI mode */
const struct omap_video_timings default_timings = {
.x_res = 640,
.y_res = 480,
.pixel_clock = 25175,
.hsw = 96,
.hfp = 16,
.hbp = 48,
.vsw = 2,
.vfp = 11,
.vbp = 31,
.vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
.interlace = false,
};
DSSDBG("ENTER hdmi_panel_probe\n");
dssdev->panel.timings = default_timings;
DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
dssdev->panel.timings.x_res,
dssdev->panel.timings.y_res);
omapdss_hdmi_display_set_timing(dssdev, &dssdev->panel.timings);
return 0;
}
static void hdmi_panel_remove(struct omap_dss_device *dssdev)
{
}
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
static int hdmi_panel_audio_enable(struct omap_dss_device *dssdev)
{
unsigned long flags;
int r;
mutex_lock(&hdmi.lock);
spin_lock_irqsave(&hdmi.audio_lock, flags);
/* enable audio only if the display is active and supports audio */
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE ||
!hdmi_mode_has_audio()) {
DSSERR("audio not supported or display is off\n");
r = -EPERM;
goto err;
}
r = hdmi_audio_enable();
if (!r)
dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
err:
spin_unlock_irqrestore(&hdmi.audio_lock, flags);
mutex_unlock(&hdmi.lock);
return r;
}
static void hdmi_panel_audio_disable(struct omap_dss_device *dssdev)
{
unsigned long flags;
spin_lock_irqsave(&hdmi.audio_lock, flags);
hdmi_audio_disable();
dssdev->audio_state = OMAP_DSS_AUDIO_DISABLED;
spin_unlock_irqrestore(&hdmi.audio_lock, flags);
}
static int hdmi_panel_audio_start(struct omap_dss_device *dssdev)
{
unsigned long flags;
int r;
spin_lock_irqsave(&hdmi.audio_lock, flags);
/*
* No need to check the panel state. It was checked when trasitioning
* to AUDIO_ENABLED.
*/
if (dssdev->audio_state != OMAP_DSS_AUDIO_ENABLED) {
DSSERR("audio start from invalid state\n");
r = -EPERM;
goto err;
}
r = hdmi_audio_start();
if (!r)
dssdev->audio_state = OMAP_DSS_AUDIO_PLAYING;
err:
spin_unlock_irqrestore(&hdmi.audio_lock, flags);
return r;
}
static void hdmi_panel_audio_stop(struct omap_dss_device *dssdev)
{
unsigned long flags;
spin_lock_irqsave(&hdmi.audio_lock, flags);
hdmi_audio_stop();
dssdev->audio_state = OMAP_DSS_AUDIO_ENABLED;
spin_unlock_irqrestore(&hdmi.audio_lock, flags);
}
static bool hdmi_panel_audio_supported(struct omap_dss_device *dssdev)
{
bool r = false;
mutex_lock(&hdmi.lock);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
goto err;
if (!hdmi_mode_has_audio())
goto err;
r = true;
err:
mutex_unlock(&hdmi.lock);
return r;
}
static int hdmi_panel_audio_config(struct omap_dss_device *dssdev,
struct omap_dss_audio *audio)
{
unsigned long flags;
int r;
mutex_lock(&hdmi.lock);
spin_lock_irqsave(&hdmi.audio_lock, flags);
/* config audio only if the display is active and supports audio */
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE ||
!hdmi_mode_has_audio()) {
DSSERR("audio not supported or display is off\n");
r = -EPERM;
goto err;
}
r = hdmi_audio_config(audio);
if (!r)
dssdev->audio_state = OMAP_DSS_AUDIO_CONFIGURED;
err:
spin_unlock_irqrestore(&hdmi.audio_lock, flags);
mutex_unlock(&hdmi.lock);
return r;
}
#else
static int hdmi_panel_audio_enable(struct omap_dss_device *dssdev)
{
return -EPERM;
}
static void hdmi_panel_audio_disable(struct omap_dss_device *dssdev)
{
}
static int hdmi_panel_audio_start(struct omap_dss_device *dssdev)
{
return -EPERM;
}
static void hdmi_panel_audio_stop(struct omap_dss_device *dssdev)
{
}
static bool hdmi_panel_audio_supported(struct omap_dss_device *dssdev)
{
return false;
}
static int hdmi_panel_audio_config(struct omap_dss_device *dssdev,
struct omap_dss_audio *audio)
{
return -EPERM;
}
#endif
static int hdmi_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
DSSDBG("ENTER hdmi_panel_enable\n");
mutex_lock(&hdmi.lock);
if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
r = -EINVAL;
goto err;
}
omapdss_hdmi_display_set_timing(dssdev, &dssdev->panel.timings);
r = omapdss_hdmi_display_enable(dssdev);
if (r) {
DSSERR("failed to power on\n");
goto err;
}
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
err:
mutex_unlock(&hdmi.lock);
return r;
}
static void hdmi_panel_disable(struct omap_dss_device *dssdev)
{
mutex_lock(&hdmi.lock);
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
/*
* TODO: notify audio users that the display was disabled. For
* now, disable audio locally to not break our audio state
* machine.
*/
hdmi_panel_audio_disable(dssdev);
omapdss_hdmi_display_disable(dssdev);
}
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&hdmi.lock);
}
static void hdmi_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
mutex_lock(&hdmi.lock);
*timings = dssdev->panel.timings;
mutex_unlock(&hdmi.lock);
}
static void hdmi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
DSSDBG("hdmi_set_timings\n");
mutex_lock(&hdmi.lock);
/*
* TODO: notify audio users that there was a timings change. For
* now, disable audio locally to not break our audio state machine.
*/
hdmi_panel_audio_disable(dssdev);
omapdss_hdmi_display_set_timing(dssdev, timings);
dssdev->panel.timings = *timings;
mutex_unlock(&hdmi.lock);
}
static int hdmi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
int r = 0;
DSSDBG("hdmi_check_timings\n");
mutex_lock(&hdmi.lock);
r = omapdss_hdmi_display_check_timing(dssdev, timings);
mutex_unlock(&hdmi.lock);
return r;
}
static int hdmi_read_edid(struct omap_dss_device *dssdev, u8 *buf, int len)
{
int r;
bool need_enable;
mutex_lock(&hdmi.lock);
need_enable = dssdev->state == OMAP_DSS_DISPLAY_DISABLED;
if (need_enable) {
r = omapdss_hdmi_core_enable(dssdev);
if (r)
goto err;
}
r = omapdss_hdmi_read_edid(buf, len);
if (need_enable)
omapdss_hdmi_core_disable(dssdev);
err:
mutex_unlock(&hdmi.lock);
return r;
}
static bool hdmi_detect(struct omap_dss_device *dssdev)
{
int r;
bool need_enable;
mutex_lock(&hdmi.lock);
need_enable = dssdev->state == OMAP_DSS_DISPLAY_DISABLED;
if (need_enable) {
r = omapdss_hdmi_core_enable(dssdev);
if (r)
goto err;
}
r = omapdss_hdmi_detect();
if (need_enable)
omapdss_hdmi_core_disable(dssdev);
err:
mutex_unlock(&hdmi.lock);
return r;
}
static struct omap_dss_driver hdmi_driver = {
.probe = hdmi_panel_probe,
.remove = hdmi_panel_remove,
.enable = hdmi_panel_enable,
.disable = hdmi_panel_disable,
.get_timings = hdmi_get_timings,
.set_timings = hdmi_set_timings,
.check_timings = hdmi_check_timings,
.read_edid = hdmi_read_edid,
.detect = hdmi_detect,
.audio_enable = hdmi_panel_audio_enable,
.audio_disable = hdmi_panel_audio_disable,
.audio_start = hdmi_panel_audio_start,
.audio_stop = hdmi_panel_audio_stop,
.audio_supported = hdmi_panel_audio_supported,
.audio_config = hdmi_panel_audio_config,
.driver = {
.name = "hdmi_panel",
.owner = THIS_MODULE,
},
};
int hdmi_panel_init(void)
{
mutex_init(&hdmi.lock);
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
spin_lock_init(&hdmi.audio_lock);
#endif
return omap_dss_register_driver(&hdmi_driver);
}
void hdmi_panel_exit(void)
{
omap_dss_unregister_driver(&hdmi_driver);
}

22
drivers/video/omap2/dss/output.c
View File

@ -34,9 +34,9 @@ int omapdss_output_set_device(struct omap_dss_device *out,
mutex_lock(&output_lock);
if (out->device) {
if (out->dst) {
DSSERR("output already has device %s connected to it\n",
out->device->name);
out->dst->name);
r = -EINVAL;
goto err;
}
@ -47,8 +47,8 @@ int omapdss_output_set_device(struct omap_dss_device *out,
goto err;
}
out->device = dssdev;
dssdev->output = out;
out->dst = dssdev;
dssdev->src = out;
mutex_unlock(&output_lock);
@ -66,21 +66,21 @@ int omapdss_output_unset_device(struct omap_dss_device *out)
mutex_lock(&output_lock);
if (!out->device) {
if (!out->dst) {
DSSERR("output doesn't have a device connected to it\n");
r = -EINVAL;
goto err;
}
if (out->device->state != OMAP_DSS_DISPLAY_DISABLED) {
if (out->dst->state != OMAP_DSS_DISPLAY_DISABLED) {
DSSERR("device %s is not disabled, cannot unset device\n",
out->device->name);
out->dst->name);
r = -EINVAL;
goto err;
}
out->device->output = NULL;
out->device = NULL;
out->dst->src = NULL;
out->dst = NULL;
mutex_unlock(&output_lock);
@ -146,8 +146,8 @@ EXPORT_SYMBOL(omap_dss_find_output_by_node);
struct omap_dss_device *omapdss_find_output_from_display(struct omap_dss_device *dssdev)
{
while (dssdev->output)
dssdev = dssdev->output;
while (dssdev->src)
dssdev = dssdev->src;
if (dssdev->id != 0)
return omap_dss_get_device(dssdev);

135
drivers/video/omap2/dss/rfbi.c
View File

@ -151,19 +151,17 @@ static void rfbi_runtime_put(void)
WARN_ON(r < 0 && r != -ENOSYS);
}
void rfbi_bus_lock(void)
static void rfbi_bus_lock(void)
{
down(&rfbi.bus_lock);
}
EXPORT_SYMBOL(rfbi_bus_lock);
void rfbi_bus_unlock(void)
static void rfbi_bus_unlock(void)
{
up(&rfbi.bus_lock);
}
EXPORT_SYMBOL(rfbi_bus_unlock);
void omap_rfbi_write_command(const void *buf, u32 len)
static void rfbi_write_command(const void *buf, u32 len)
{
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
@ -189,9 +187,8 @@ void omap_rfbi_write_command(const void *buf, u32 len)
BUG();
}
}
EXPORT_SYMBOL(omap_rfbi_write_command);
void omap_rfbi_read_data(void *buf, u32 len)
static void rfbi_read_data(void *buf, u32 len)
{
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
@ -221,9 +218,8 @@ void omap_rfbi_read_data(void *buf, u32 len)
BUG();
}
}
EXPORT_SYMBOL(omap_rfbi_read_data);
void omap_rfbi_write_data(const void *buf, u32 len)
static void rfbi_write_data(const void *buf, u32 len)
{
switch (rfbi.parallelmode) {
case OMAP_DSS_RFBI_PARALLELMODE_8:
@ -250,9 +246,8 @@ void omap_rfbi_write_data(const void *buf, u32 len)
}
}
EXPORT_SYMBOL(omap_rfbi_write_data);
void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
static void rfbi_write_pixels(const void __iomem *buf, int scr_width,
u16 x, u16 y,
u16 w, u16 h)
{
@ -305,7 +300,6 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
BUG();
}
}
EXPORT_SYMBOL(omap_rfbi_write_pixels);
static int rfbi_transfer_area(struct omap_dss_device *dssdev,
void (*callback)(void *data), void *data)
@ -574,7 +568,7 @@ static int rfbi_convert_timings(struct rfbi_timings *t)
}
/* xxx FIX module selection missing */
int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
static int rfbi_setup_te(enum omap_rfbi_te_mode mode,
unsigned hs_pulse_time, unsigned vs_pulse_time,
int hs_pol_inv, int vs_pol_inv, int extif_div)
{
@ -613,10 +607,9 @@ int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
return 0;
}
EXPORT_SYMBOL(omap_rfbi_setup_te);
/* xxx FIX module selection missing */
int omap_rfbi_enable_te(bool enable, unsigned line)
static int rfbi_enable_te(bool enable, unsigned line)
{
u32 l;
@ -636,9 +629,8 @@ int omap_rfbi_enable_te(bool enable, unsigned line)
return 0;
}
EXPORT_SYMBOL(omap_rfbi_enable_te);
static int rfbi_configure(int rfbi_module, int bpp, int lines)
static int rfbi_configure_bus(int rfbi_module, int bpp, int lines)
{
u32 l;
int cycle1 = 0, cycle2 = 0, cycle3 = 0;
@ -770,45 +762,39 @@ static int rfbi_configure(int rfbi_module, int bpp, int lines)
return 0;
}
int omap_rfbi_configure(struct omap_dss_device *dssdev)
static int rfbi_configure(struct omap_dss_device *dssdev)
{
return rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
return rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size,
rfbi.data_lines);
}
EXPORT_SYMBOL(omap_rfbi_configure);
int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *),
static int rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *),
void *data)
{
return rfbi_transfer_area(dssdev, callback, data);
}
EXPORT_SYMBOL(omap_rfbi_update);
void omapdss_rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
static void rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h)
{
rfbi.timings.x_res = w;
rfbi.timings.y_res = h;
}
EXPORT_SYMBOL(omapdss_rfbi_set_size);
void omapdss_rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size)
static void rfbi_set_pixel_size(struct omap_dss_device *dssdev, int pixel_size)
{
rfbi.pixel_size = pixel_size;
}
EXPORT_SYMBOL(omapdss_rfbi_set_pixel_size);
void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
static void rfbi_set_data_lines(struct omap_dss_device *dssdev, int data_lines)
{
rfbi.data_lines = data_lines;
}
EXPORT_SYMBOL(omapdss_rfbi_set_data_lines);
void omapdss_rfbi_set_interface_timings(struct omap_dss_device *dssdev,
static void rfbi_set_interface_timings(struct omap_dss_device *dssdev,
struct rfbi_timings *timings)
{
rfbi.intf_timings = *timings;
}
EXPORT_SYMBOL(omapdss_rfbi_set_interface_timings);
static void rfbi_dump_regs(struct seq_file *s)
{
@ -888,7 +874,7 @@ static void rfbi_config_lcd_manager(struct omap_dss_device *dssdev)
dss_mgr_set_timings(mgr, &rfbi.timings);
}
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
static int rfbi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &rfbi.output;
int r;
@ -911,7 +897,7 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
rfbi_config_lcd_manager(dssdev);
rfbi_configure(dssdev->phy.rfbi.channel, rfbi.pixel_size,
rfbi_configure_bus(dssdev->phy.rfbi.channel, rfbi.pixel_size,
rfbi.data_lines);
rfbi_set_timings(dssdev->phy.rfbi.channel, &rfbi.intf_timings);
@ -921,9 +907,8 @@ err1:
rfbi_runtime_put();
return r;
}
EXPORT_SYMBOL(omapdss_rfbi_display_enable);
void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
static void rfbi_display_disable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &rfbi.output;
@ -932,7 +917,6 @@ void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev)
rfbi_runtime_put();
}
EXPORT_SYMBOL(omapdss_rfbi_display_disable);
static int rfbi_init_display(struct omap_dss_device *dssdev)
{
@ -940,77 +924,6 @@ static int rfbi_init_display(struct omap_dss_device *dssdev)
return 0;
}
static struct omap_dss_device *rfbi_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_DBI)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int rfbi_probe_pdata(struct platform_device *rfbidev)
{
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
int r;
plat_dssdev = rfbi_find_dssdev(rfbidev);
if (!plat_dssdev)
return 0;
dssdev = dss_alloc_and_init_device(&rfbidev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
r = rfbi_init_display(dssdev);
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
dss_put_device(dssdev);
return r;
}
r = omapdss_output_set_device(&rfbi.output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&rfbi.output);
dss_put_device(dssdev);
return r;
}
return 0;
}
static void rfbi_init_output(struct platform_device *pdev)
{
struct omap_dss_device *out = &rfbi.output;
@ -1085,16 +998,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev)
rfbi_init_output(pdev);
if (pdev->dev.platform_data) {
r = rfbi_probe_pdata(pdev);
if (r)
goto err_probe;
}
return 0;
err_probe:
rfbi_uninit_output(pdev);
err_runtime_get:
pm_runtime_disable(&pdev->dev);
return r;
@ -1102,8 +1007,6 @@ err_runtime_get:
static int __exit omap_rfbihw_remove(struct platform_device *pdev)
{
dss_unregister_child_devices(&pdev->dev);
rfbi_uninit_output(pdev);
pm_runtime_disable(&pdev->dev);

119
drivers/video/omap2/dss/sdi.c
View File

@ -124,7 +124,7 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
dss_mgr_set_lcd_config(mgr, &sdi.mgr_config);
}
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
static int sdi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &sdi.output;
struct omap_video_timings *t = &sdi.timings;
@ -211,9 +211,8 @@ err_get_dispc:
err_reg_enable:
return r;
}
EXPORT_SYMBOL(omapdss_sdi_display_enable);
void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
static void sdi_display_disable(struct omap_dss_device *dssdev)
{
struct omap_overlay_manager *mgr = sdi.output.manager;
@ -225,14 +224,12 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
regulator_disable(sdi.vdds_sdi_reg);
}
EXPORT_SYMBOL(omapdss_sdi_display_disable);
void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
static void sdi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
sdi.timings = *timings;
}
EXPORT_SYMBOL(omapdss_sdi_set_timings);
static void sdi_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
@ -254,11 +251,10 @@ static int sdi_check_timings(struct omap_dss_device *dssdev,
return 0;
}
void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs)
static void sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs)
{
sdi.datapairs = datapairs;
}
EXPORT_SYMBOL(omapdss_sdi_set_datapairs);
static int sdi_init_regulator(void)
{
@ -267,14 +263,10 @@ static int sdi_init_regulator(void)
if (sdi.vdds_sdi_reg)
return 0;
vdds_sdi = dss_get_vdds_sdi();
vdds_sdi = devm_regulator_get(&sdi.pdev->dev, "vdds_sdi");
if (IS_ERR(vdds_sdi)) {
vdds_sdi = devm_regulator_get(&sdi.pdev->dev, "vdds_sdi");
if (IS_ERR(vdds_sdi)) {
DSSERR("can't get VDDS_SDI regulator\n");
return PTR_ERR(vdds_sdi);
}
DSSERR("can't get VDDS_SDI regulator\n");
return PTR_ERR(vdds_sdi);
}
sdi.vdds_sdi_reg = vdds_sdi;
@ -282,77 +274,6 @@ static int sdi_init_regulator(void)
return 0;
}
static struct omap_dss_device *sdi_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_SDI)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int sdi_probe_pdata(struct platform_device *sdidev)
{
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
int r;
plat_dssdev = sdi_find_dssdev(sdidev);
if (!plat_dssdev)
return 0;
dssdev = dss_alloc_and_init_device(&sdidev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
r = sdi_init_regulator();
if (r) {
DSSERR("device %s init failed: %d\n", dssdev->name, r);
dss_put_device(dssdev);
return r;
}
r = omapdss_output_set_device(&sdi.output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&sdi.output);
dss_put_device(dssdev);
return r;
}
return 0;
}
static int sdi_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@ -385,9 +306,9 @@ static int sdi_connect(struct omap_dss_device *dssdev,
static void sdi_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
@ -400,14 +321,14 @@ static const struct omapdss_sdi_ops sdi_ops = {
.connect = sdi_connect,
.disconnect = sdi_disconnect,
.enable = omapdss_sdi_display_enable,
.disable = omapdss_sdi_display_disable,
.enable = sdi_display_enable,
.disable = sdi_display_disable,
.check_timings = sdi_check_timings,
.set_timings = omapdss_sdi_set_timings,
.set_timings = sdi_set_timings,
.get_timings = sdi_get_timings,
.set_datapairs = omapdss_sdi_set_datapairs,
.set_datapairs = sdi_set_datapairs,
};
static void sdi_init_output(struct platform_device *pdev)
@ -434,29 +355,15 @@ static void __exit sdi_uninit_output(struct platform_device *pdev)
static int omap_sdi_probe(struct platform_device *pdev)
{
int r;
sdi.pdev = pdev;
sdi_init_output(pdev);
if (pdev->dev.platform_data) {
r = sdi_probe_pdata(pdev);
if (r)
goto err_probe;
}
return 0;
err_probe:
sdi_uninit_output(pdev);
return r;
}
static int __exit omap_sdi_remove(struct platform_device *pdev)
{
dss_unregister_child_devices(&pdev->dev);
sdi_uninit_output(pdev);
return 0;

122
drivers/video/omap2/dss/venc.c
View File

@ -492,7 +492,7 @@ static void venc_power_off(struct omap_dss_device *dssdev)
venc_runtime_put();
}
int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
static int venc_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &venc.output;
int r;
@ -521,7 +521,7 @@ err0:
return r;
}
void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
static void venc_display_disable(struct omap_dss_device *dssdev)
{
DSSDBG("venc_display_disable\n");
@ -532,7 +532,7 @@ void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
mutex_unlock(&venc.venc_lock);
}
void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
static void venc_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
DSSDBG("venc_set_timings\n");
@ -550,7 +550,7 @@ void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
mutex_unlock(&venc.venc_lock);
}
int omapdss_venc_check_timings(struct omap_dss_device *dssdev,
static int venc_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
DSSDBG("venc_check_timings\n");
@ -574,13 +574,13 @@ static void venc_get_timings(struct omap_dss_device *dssdev,
mutex_unlock(&venc.venc_lock);
}
u32 omapdss_venc_get_wss(struct omap_dss_device *dssdev)
static u32 venc_get_wss(struct omap_dss_device *dssdev)
{
/* Invert due to VENC_L21_WC_CTL:INV=1 */
return (venc.wss_data >> 8) ^ 0xfffff;
}
int omapdss_venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
static int venc_set_wss(struct omap_dss_device *dssdev, u32 wss)
{
const struct venc_config *config;
int r;
@ -609,7 +609,7 @@ err:
return r;
}
void omapdss_venc_set_type(struct omap_dss_device *dssdev,
static void venc_set_type(struct omap_dss_device *dssdev,
enum omap_dss_venc_type type)
{
mutex_lock(&venc.venc_lock);
@ -619,7 +619,7 @@ void omapdss_venc_set_type(struct omap_dss_device *dssdev,
mutex_unlock(&venc.venc_lock);
}
void omapdss_venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
static void venc_invert_vid_out_polarity(struct omap_dss_device *dssdev,
bool invert_polarity)
{
mutex_lock(&venc.venc_lock);
@ -721,74 +721,6 @@ static int venc_get_clocks(struct platform_device *pdev)
return 0;
}
static struct omap_dss_device *venc_find_dssdev(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
const char *def_disp_name = omapdss_get_default_display_name();
struct omap_dss_device *def_dssdev;
int i;
def_dssdev = NULL;
for (i = 0; i < pdata->num_devices; ++i) {
struct omap_dss_device *dssdev = pdata->devices[i];
if (dssdev->type != OMAP_DISPLAY_TYPE_VENC)
continue;
if (def_dssdev == NULL)
def_dssdev = dssdev;
if (def_disp_name != NULL &&
strcmp(dssdev->name, def_disp_name) == 0) {
def_dssdev = dssdev;
break;
}
}
return def_dssdev;
}
static int venc_probe_pdata(struct platform_device *vencdev)
{
struct omap_dss_device *plat_dssdev;
struct omap_dss_device *dssdev;
int r;
plat_dssdev = venc_find_dssdev(vencdev);
if (!plat_dssdev)
return 0;
r = venc_init_regulator();
if (r)
return r;
dssdev = dss_alloc_and_init_device(&vencdev->dev);
if (!dssdev)
return -ENOMEM;
dss_copy_device_pdata(dssdev, plat_dssdev);
r = omapdss_output_set_device(&venc.output, dssdev);
if (r) {
DSSERR("failed to connect output to new device: %s\n",
dssdev->name);
dss_put_device(dssdev);
return r;
}
r = dss_add_device(dssdev);
if (r) {
DSSERR("device %s register failed: %d\n", dssdev->name, r);
omapdss_output_unset_device(&venc.output);
dss_put_device(dssdev);
return r;
}
return 0;
}
static int venc_connect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
@ -821,9 +753,9 @@ static int venc_connect(struct omap_dss_device *dssdev,
static void venc_disconnect(struct omap_dss_device *dssdev,
struct omap_dss_device *dst)
{
WARN_ON(dst != dssdev->device);
WARN_ON(dst != dssdev->dst);
if (dst != dssdev->device)
if (dst != dssdev->dst)
return;
omapdss_output_unset_device(dssdev);
@ -836,18 +768,18 @@ static const struct omapdss_atv_ops venc_ops = {
.connect = venc_connect,
.disconnect = venc_disconnect,
.enable = omapdss_venc_display_enable,
.disable = omapdss_venc_display_disable,
.enable = venc_display_enable,
.disable = venc_display_disable,
.check_timings = omapdss_venc_check_timings,
.set_timings = omapdss_venc_set_timings,
.check_timings = venc_check_timings,
.set_timings = venc_set_timings,
.get_timings = venc_get_timings,
.set_type = omapdss_venc_set_type,
.invert_vid_out_polarity = omapdss_venc_invert_vid_out_polarity,
.set_type = venc_set_type,
.invert_vid_out_polarity = venc_invert_vid_out_polarity,
.set_wss = omapdss_venc_set_wss,
.get_wss = omapdss_venc_get_wss,
.set_wss = venc_set_wss,
.get_wss = venc_get_wss,
};
static void venc_init_output(struct platform_device *pdev)
@ -913,26 +845,12 @@ static int omap_venchw_probe(struct platform_device *pdev)
venc_runtime_put();
r = venc_panel_init();
if (r)
goto err_panel_init;
dss_debugfs_create_file("venc", venc_dump_regs);
venc_init_output(pdev);
if (pdev->dev.platform_data) {
r = venc_probe_pdata(pdev);
if (r)
goto err_probe;
}
return 0;
err_probe:
venc_panel_exit();
venc_uninit_output(pdev);
err_panel_init:
err_runtime_get:
pm_runtime_disable(&pdev->dev);
return r;
@ -940,10 +858,6 @@ err_runtime_get:
static int __exit omap_venchw_remove(struct platform_device *pdev)
{
dss_unregister_child_devices(&pdev->dev);
venc_panel_exit();
venc_uninit_output(pdev);
pm_runtime_disable(&pdev->dev);

118
include/video/omap-panel-data.h
View File

@ -32,124 +32,6 @@
struct omap_dss_device;
/**
* struct panel_generic_dpi_data - panel driver configuration data
* @name: panel name
* @platform_enable: platform specific panel enable function
* @platform_disable: platform specific panel disable function
* @num_gpios: number of gpios connected to panel
* @gpios: gpio numbers on the platform
* @gpio_invert: configure gpio as active high or low
*/
struct panel_generic_dpi_data {
const char *name;
int (*platform_enable)(struct omap_dss_device *dssdev);
void (*platform_disable)(struct omap_dss_device *dssdev);
int num_gpios;
int gpios[10];
bool gpio_invert[10];
};
/**
* struct panel_n8x0_data - N800 panel driver configuration data
*/
struct panel_n8x0_data {
int (*platform_enable)(struct omap_dss_device *dssdev);
void (*platform_disable)(struct omap_dss_device *dssdev);
int panel_reset;
int ctrl_pwrdown;
};
/**
* struct nokia_dsi_panel_data - Nokia DSI panel driver configuration data
* @name: panel name
* @use_ext_te: use external TE
* @ext_te_gpio: external TE GPIO
* @esd_interval: interval of ESD checks, 0 = disabled (ms)
* @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
* @use_dsi_backlight: true if panel uses DSI command to control backlight
* @pin_config: DSI pin configuration
*/
struct nokia_dsi_panel_data {
const char *name;
int reset_gpio;
bool use_ext_te;
int ext_te_gpio;
unsigned esd_interval;
unsigned ulps_timeout;
bool use_dsi_backlight;
struct omap_dsi_pin_config pin_config;
};
/**
* struct picodlp_panel_data - picodlp panel driver configuration data
* @picodlp_adapter_id: i2c_adapter number for picodlp
*/
struct picodlp_panel_data {
int picodlp_adapter_id;
int emu_done_gpio;
int pwrgood_gpio;
};
/**
* struct tfp410_platform_data - tfp410 panel driver configuration data
* @i2c_bus_num: i2c bus id for the panel
* @power_down_gpio: gpio number for PD pin (or -1 if not available)
*/
struct tfp410_platform_data {
int i2c_bus_num;
int power_down_gpio;
};
/**
* sharp ls panel driver configuration data
* @resb_gpio: reset signal
* @ini_gpio: power on control
* @mo_gpio: selection for resolution(VGA/QVGA)
* @lr_gpio: selection for horizontal scanning direction
* @ud_gpio: selection for vertical scanning direction
*/
struct panel_sharp_ls037v7dw01_data {
int resb_gpio;
int ini_gpio;
int mo_gpio;
int lr_gpio;
int ud_gpio;
};
/**
* acx565akm panel driver configuration data
* @reset_gpio: reset signal
*/
struct panel_acx565akm_data {
int reset_gpio;
};
/**
* nec nl8048 panel driver configuration data
* @res_gpio: reset signal
* @qvga_gpio: selection for resolution(QVGA/WVGA)
*/
struct panel_nec_nl8048_data {
int res_gpio;
int qvga_gpio;
};
/**
* tpo td043 panel driver configuration data
* @nreset_gpio: reset signal
*/
struct panel_tpo_td043_data {
int nreset_gpio;
};
/**
* encoder_tfp410 platform data
* @name: name for this display entity

106
include/video/omapdss.h
View File

@ -250,19 +250,6 @@ struct rfbi_timings {
int converted;
};
void omap_rfbi_write_command(const void *buf, u32 len);
void omap_rfbi_read_data(void *buf, u32 len);
void omap_rfbi_write_data(const void *buf, u32 len);
void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
u16 x, u16 y,
u16 w, u16 h);
int omap_rfbi_enable_te(bool enable, unsigned line);
int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
unsigned hs_pulse_time, unsigned vs_pulse_time,
int hs_pol_inv, int vs_pol_inv, int extif_div);
void rfbi_bus_lock(void);
void rfbi_bus_unlock(void);
/* DSI */
enum omap_dss_dsi_trans_mode {
@ -321,39 +308,6 @@ struct omap_dss_dsi_config {
enum omap_dss_dsi_trans_mode trans_mode;
};
void dsi_bus_lock(struct omap_dss_device *dssdev);
void dsi_bus_unlock(struct omap_dss_device *dssdev);
int dsi_vc_dcs_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len);
int dsi_vc_generic_write(struct omap_dss_device *dssdev, int channel, u8 *data,
int len);
int dsi_vc_dcs_write_0(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd);
int dsi_vc_generic_write_0(struct omap_dss_device *dssdev, int channel);
int dsi_vc_dcs_write_1(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 param);
int dsi_vc_generic_write_1(struct omap_dss_device *dssdev, int channel,
u8 param);
int dsi_vc_generic_write_2(struct omap_dss_device *dssdev, int channel,
u8 param1, u8 param2);
int dsi_vc_dcs_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len);
int dsi_vc_generic_write_nosync(struct omap_dss_device *dssdev, int channel,
u8 *data, int len);
int dsi_vc_dcs_read(struct omap_dss_device *dssdev, int channel, u8 dcs_cmd,
u8 *buf, int buflen);
int dsi_vc_generic_read_0(struct omap_dss_device *dssdev, int channel, u8 *buf,
int buflen);
int dsi_vc_generic_read_1(struct omap_dss_device *dssdev, int channel, u8 param,
u8 *buf, int buflen);
int dsi_vc_generic_read_2(struct omap_dss_device *dssdev, int channel,
u8 param1, u8 param2, u8 *buf, int buflen);
int dsi_vc_set_max_rx_packet_size(struct omap_dss_device *dssdev, int channel,
u16 len);
int dsi_vc_send_null(struct omap_dss_device *dssdev, int channel);
int dsi_vc_send_bta_sync(struct omap_dss_device *dssdev, int channel);
int dsi_enable_video_output(struct omap_dss_device *dssdev, int channel);
void dsi_disable_video_output(struct omap_dss_device *dssdev, int channel);
enum omapdss_version {
OMAPDSS_VER_UNKNOWN = 0,
OMAPDSS_VER_OMAP24xx,
@ -749,10 +703,6 @@ struct omapdss_dsi_ops {
};
struct omap_dss_device {
/* old device, to be removed */
struct device old_dev;
/* new device, pointer to panel device */
struct device *dev;
struct module *owner;
@ -765,9 +715,6 @@ struct omap_dss_device {
enum omap_display_type type;
enum omap_display_type output_type;
/* obsolete, to be removed */
enum omap_channel channel;
union {
struct {
u8 data_lines;
@ -827,7 +774,7 @@ struct omap_dss_device {
enum omap_display_caps caps;
struct omap_dss_device *output;
struct omap_dss_device *src;
enum omap_dss_display_state state;
@ -846,7 +793,7 @@ struct omap_dss_device {
/* dynamic fields */
struct omap_overlay_manager *manager;
struct omap_dss_device *device;
struct omap_dss_device *dst;
};
struct omap_dss_hdmi_data
@ -857,8 +804,6 @@ struct omap_dss_hdmi_data
};
struct omap_dss_driver {
struct device_driver driver;
int (*probe)(struct omap_dss_device *);
void (*remove)(struct omap_dss_device *);
@ -1023,51 +968,6 @@ int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
#define to_dss_device(x) container_of((x), struct omap_dss_device, old_dev)
void omapdss_dsi_vc_enable_hs(struct omap_dss_device *dssdev, int channel,
bool enable);
int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
int omapdss_dsi_set_config(struct omap_dss_device *dssdev,
const struct omap_dss_dsi_config *config);
int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
void (*callback)(int, void *), void *data);
int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
const struct omap_dsi_pin_config *pin_cfg);
int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
bool disconnect_lanes, bool enter_ulps);
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
void omapdss_dpi_set_data_lines(struct omap_dss_device *dssdev, int data_lines);
int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs);
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
int omap_rfbi_update(struct omap_dss_device *dssdev, void (*callback)(void *),
void *data);
int omap_rfbi_configure(struct omap_dss_device *dssdev);
void omapdss_rfbi_set_size(struct omap_dss_device *dssdev, u16 w, u16 h);
void omapdss_rfbi_set_pixel_size(struct omap_dss_device *dssdev,
int pixel_size);
void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev,
int data_lines);
void omapdss_rfbi_set_interface_timings(struct omap_dss_device *dssdev,
struct rfbi_timings *timings);
int omapdss_compat_init(void);
void omapdss_compat_uninit(void);
@ -1111,7 +1011,7 @@ void dss_mgr_unregister_framedone_handler(struct omap_overlay_manager *mgr,
static inline bool omapdss_device_is_connected(struct omap_dss_device *dssdev)
{
return dssdev->output;
return dssdev->src;
}
static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)