Staging: b3dfg: Prepare b3dfg for submission upstream.

- Basically, update driver to run with 2.6.28
    - Conversion from struct class_device to struct device.
    - Conversion from .nopfn to .fault in vm_operations_struct.
    - Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
    - Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.

Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Justin Bronder 2009-01-28 10:06:42 -05:00 committed by Greg Kroah-Hartman
parent 5f4e925ad7
commit ecf4745166
6 changed files with 57 additions and 46 deletions

View File

@ -101,5 +101,7 @@ source "drivers/staging/stlc45xx/Kconfig"
source "drivers/staging/uc2322/Kconfig"
source "drivers/staging/b3dfg/Kconfig"
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING

View File

@ -33,3 +33,4 @@ obj-$(CONFIG_DST) += dst/
obj-$(CONFIG_POHMELFS) += pohmelfs/
obj-$(CONFIG_STLC45XX) += stlc45xx/
obj-$(CONFIG_USB_SERIAL_ATEN2011) += uc2322/
obj-$(CONFIG_B3DFG) += b3dfg/

View File

@ -0,0 +1,9 @@
config B3DFG
tristate "Brontes 3d Frame Framegrabber"
default n
---help---
This driver provides support for the Brontes 3d Framegrabber
PCI card.
To compile this driver as a module, choose M here. The module
will be called b3dfg.

View File

@ -0,0 +1 @@
obj-$(CONFIG_B3DFG) += b3dfg.o

View File

@ -0,0 +1,4 @@
- queue/wait buffer presents filltime results for each frame?
- counting of dropped frames
- review endianness

View File

@ -2,7 +2,9 @@
* Brontes PCI frame grabber driver
*
* Copyright (C) 2008 3M Company
* Contact: Daniel Drake <ddrake@brontes3d.com>
* Contact: Justin Bronder <jsbronder@brontes3d.com>
* Original Authors: Daniel Drake <ddrake@brontes3d.com>
* Duane Griffin <duaneg@dghda.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -34,14 +36,7 @@
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/version.h>
#include <asm/uaccess.h>
/* TODO:
* queue/wait buffer presents filltime results for each frame?
* counting of dropped frames
* review endianness
*/
#include <linux/uaccess.h>
static unsigned int b3dfg_nbuf = 2;
@ -119,7 +114,7 @@ struct b3dfg_dev {
/* no protection needed: all finalized at initialization time */
struct pci_dev *pdev;
struct cdev chardev;
struct class_device *classdev;
struct device *dev;
void __iomem *regs;
unsigned int frame_size;
@ -164,10 +159,6 @@ static dev_t b3dfg_devt;
static const struct pci_device_id b3dfg_ids[] __devinitdata = {
{ PCI_DEVICE(0x0b3d, 0x0001) },
/* FIXME: remove this ID once all boards have been moved to 0xb3d.
* Eureka's vendor ID that we borrowed before we bought our own. */
{ PCI_DEVICE(0x1901, 0x0001) },
{ },
};
@ -213,15 +204,17 @@ static int setup_frame_transfer(struct b3dfg_dev *fgdev,
frm_addr = buf->frame[frame];
frm_addr_dma = pci_map_single(fgdev->pdev, frm_addr,
frm_size, PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(frm_addr_dma))
frm_size, PCI_DMA_FROMDEVICE);
if (pci_dma_mapping_error(fgdev->pdev, frm_addr_dma))
return -ENOMEM;
fgdev->cur_dma_frame_addr = frm_addr_dma;
fgdev->cur_dma_frame_idx = frame;
b3dfg_write32(fgdev, B3D_REG_EC220_DMA_ADDR, cpu_to_le32(frm_addr_dma));
b3dfg_write32(fgdev, B3D_REG_EC220_TRF_SIZE, cpu_to_le32(frm_size >> 2));
b3dfg_write32(fgdev, B3D_REG_EC220_DMA_ADDR,
cpu_to_le32(frm_addr_dma));
b3dfg_write32(fgdev, B3D_REG_EC220_TRF_SIZE,
cpu_to_le32(frm_size >> 2));
b3dfg_write32(fgdev, B3D_REG_EC220_DMA_STS, 0xf);
return 0;
@ -248,6 +241,7 @@ static int queue_buffer(struct b3dfg_dev *fgdev, int bufidx)
spin_lock_irqsave(&fgdev->buffer_lock, flags);
if (bufidx < 0 || bufidx >= b3dfg_nbuf) {
dev_dbg(dev, "Invalid buffer index, %d\n", bufidx);
r = -ENOENT;
goto out;
}
@ -432,11 +426,11 @@ out:
}
/* mmap page fault handler */
static unsigned long b3dfg_vma_nopfn(struct vm_area_struct *vma,
unsigned long address)
static int b3dfg_vma_fault(struct vm_area_struct *vma,
struct vm_fault *vmf)
{
struct b3dfg_dev *fgdev = vma->vm_file->private_data;
unsigned long off = address - vma->vm_start;
unsigned long off = vmf->pgoff << PAGE_SHIFT;
unsigned int frame_size = fgdev->frame_size;
unsigned int buf_size = frame_size * B3DFG_FRAMES_PER_BUFFER;
unsigned char *addr;
@ -452,17 +446,17 @@ static unsigned long b3dfg_vma_nopfn(struct vm_area_struct *vma,
unsigned int frm_off = buf_off % frame_size;
if (unlikely(buf_idx >= b3dfg_nbuf))
return NOPFN_SIGBUS;
return VM_FAULT_SIGBUS;
addr = fgdev->buffers[buf_idx].frame[frm_idx] + frm_off;
vm_insert_pfn(vma, vma->vm_start + off,
virt_to_phys(addr) >> PAGE_SHIFT);
vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
virt_to_phys(addr) >> PAGE_SHIFT);
return NOPFN_REFAULT;
return VM_FAULT_NOPAGE;
}
static struct vm_operations_struct b3dfg_vm_ops = {
.nopfn = b3dfg_vma_nopfn,
.fault = b3dfg_vma_fault,
};
static int get_wand_status(struct b3dfg_dev *fgdev, int __user *arg)
@ -601,12 +595,12 @@ static void handle_cstate_change(struct b3dfg_dev *fgdev)
* broken wire and is momentarily losing contact.
*
* TODO: At the moment if you plug in the cable then enable transmission
* the hardware will raise a couple of spurious interrupts, so
* just ignore them for now.
* the hardware will raise a couple of spurious interrupts, so
* just ignore them for now.
*
* Once the hardware is fixed we should complain and treat it as an
* unplug. Or at least track how frequently it is happening and do
* so if too many come in.
* Once the hardware is fixed we should complain and treat it as an
* unplug. Or at least track how frequently it is happening and do
* so if too many come in.
*/
if (cstate) {
dev_warn(dev, "ignoring unexpected plug event\n");
@ -801,10 +795,6 @@ static long b3dfg_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
return __put_user(fgdev->frame_size, (int __user *) arg);
case B3DFG_IOCGWANDSTAT:
return get_wand_status(fgdev, (int __user *) arg);
case B3DFG_IOCTNUMBUFS:
/* TODO: Remove once userspace stops using this. */
return 0;
case B3DFG_IOCTTRANS:
return set_transmission(fgdev, (int) arg);
case B3DFG_IOCTQUEUEBUF:
@ -970,12 +960,16 @@ static int __devinit b3dfg_probe(struct pci_dev *pdev,
goto err_release_minor;
}
fgdev->classdev = class_device_create(b3dfg_class, NULL, devno,
&pdev->dev, DRIVER_NAME "%d",
minor);
if (IS_ERR(fgdev->classdev)) {
dev_err(&pdev->dev, "cannot create class device\n");
r = PTR_ERR(fgdev->classdev);
fgdev->dev = device_create(
b3dfg_class,
&pdev->dev,
devno,
dev_get_drvdata(&pdev->dev),
DRIVER_NAME "%d", minor);
if (IS_ERR(fgdev->dev)) {
dev_err(&pdev->dev, "cannot create device\n");
r = PTR_ERR(fgdev->dev);
goto err_del_cdev;
}
@ -992,12 +986,12 @@ static int __devinit b3dfg_probe(struct pci_dev *pdev,
goto err_disable;
}
if (pci_resource_flags(pdev, B3DFG_BAR_REGS) != IORESOURCE_MEM) {
if (pci_resource_flags(pdev, B3DFG_BAR_REGS)
!= (IORESOURCE_MEM | IORESOURCE_SIZEALIGN)) {
dev_err(&pdev->dev, "invalid resource flags\n");
r = -EIO;
goto err_disable;
}
r = pci_request_regions(pdev, DRIVER_NAME);
if (r) {
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@ -1045,7 +1039,7 @@ err_free_res:
err_disable:
pci_disable_device(pdev);
err_dev_unreg:
class_device_unregister(fgdev->classdev);
device_destroy(b3dfg_class, devno);
err_del_cdev:
cdev_del(&fgdev->chardev);
err_release_minor:
@ -1066,7 +1060,7 @@ static void __devexit b3dfg_remove(struct pci_dev *pdev)
iounmap(fgdev->regs);
pci_release_regions(pdev);
pci_disable_device(pdev);
class_device_unregister(fgdev->classdev);
device_destroy(b3dfg_class, MKDEV(MAJOR(b3dfg_devt), minor));
cdev_del(&fgdev->chardev);
free_all_frame_buffers(fgdev);
kfree(fgdev);
@ -1086,7 +1080,7 @@ static int __init b3dfg_module_init(void)
if (b3dfg_nbuf < 2) {
printk(KERN_ERR DRIVER_NAME
": buffer_count is out of range (must be >= 2)");
": buffer_count is out of range (must be >= 2)");
return -EINVAL;
}