pata_sis: code style cleanups for consistency

Remove a lot of '  ' (double spaces) as well as ensuring use of tabs vs.
spaces is appropriate and consistent.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Dan McGee 2011-09-07 11:23:22 -05:00 committed by Jeff Garzik
parent c03a476dda
commit edc7d12ede
1 changed files with 19 additions and 19 deletions

View File

@ -55,7 +55,7 @@ static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
@ -76,7 +76,7 @@ static int sis_short_ata40(struct pci_dev *dev)
}
/**
* sis_old_port_base - return PCI configuration base for dev
* sis_old_port_base - return PCI configuration base for dev
* @adev: device
*
* Returns the base of the PCI configuration registers for this port
@ -85,11 +85,11 @@ static int sis_short_ata40(struct pci_dev *dev)
static int sis_old_port_base(struct ata_device *adev)
{
return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
}
/**
* sis_port_base - return PCI configuration base for dev
* sis_port_base - return PCI configuration base for dev
* @adev: device
*
* Returns the base of the PCI configuration registers for this port
@ -112,7 +112,7 @@ static int sis_port_base(struct ata_device *adev)
}
/**
* sis_133_cable_detect - check for 40/80 pin
* sis_133_cable_detect - check for 40/80 pin
* @ap: Port
* @deadline: deadline jiffies for the operation
*
@ -133,7 +133,7 @@ static int sis_133_cable_detect(struct ata_port *ap)
}
/**
* sis_66_cable_detect - check for 40/80 pin
* sis_66_cable_detect - check for 40/80 pin
* @ap: Port
*
* Perform cable detection on the UDMA66, UDMA100 and early UDMA133
@ -155,7 +155,7 @@ static int sis_66_cable_detect(struct ata_port *ap)
/**
* sis_pre_reset - probe begin
* sis_pre_reset - probe begin
* @link: ATA link
* @deadline: deadline jiffies for the operation
*
@ -183,7 +183,7 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
/**
* sis_set_fifo - Set RWP fifo bits for this device
* sis_set_fifo - Set RWP fifo bits for this device
* @ap: Port
* @adev: Device
*
@ -226,7 +226,7 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
u8 t1, t2;
int speed = adev->pio_mode - XFER_PIO_0;
@ -263,7 +263,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
int speed = adev->pio_mode - XFER_PIO_0;
@ -288,7 +288,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port;
u32 t1;
int speed = adev->pio_mode - XFER_PIO_0;
@ -336,7 +336,7 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
@ -375,7 +375,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
@ -414,7 +414,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
@ -448,7 +448,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
@ -481,7 +481,7 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port;
u32 t1;
@ -710,7 +710,7 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
* @pdev: PCI device to register
* @ent: Entry in sis_pci_tbl matching with @pdev
*
* Called from kernel PCI layer. We probe for combined mode (sigh),
* Called from kernel PCI layer. We probe for combined mode (sigh),
* and then hand over control to libata, for it to do the rest.
*
* LOCKING:
@ -820,10 +820,10 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
}
break;
case 0x0180: /* SIS 965/965L */
chipset = &sis133;
chipset = &sis133;
break;
case 0x1180: /* SIS 966/966L */
chipset = &sis133;
chipset = &sis133;
break;
}
}