[MIPS] cmbvr4133: Remove support

It cannot be built for a long time and nobody maintains it.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Yoichi Yuasa 2008-07-11 22:45:21 +09:00 committed by Ralf Baechle
parent 3f16654f36
commit efff4ae259
11 changed files with 0 additions and 734 deletions

View File

@ -354,12 +354,6 @@ load-$(CONFIG_LASAT) += 0xffffffff80000000
core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/
cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx
#
# NEC VR4133
#
core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/
load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000
#
# ZAO Networks Capcella (VR4131)
#

View File

@ -13,7 +13,6 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o
obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o

View File

@ -1,194 +0,0 @@
/*
* arch/mips/pci/fixup-vr4133.c
*
* The NEC CMB-VR4133 Board specific PCI fixups.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Modified for support in 2.6
* Author: Manish Lachwani (mlachwani@mvista.com)
*
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/vr41xx/cmbvr4133.h>
extern int vr4133_rockhopper;
extern void ali_m1535plus_init(struct pci_dev *dev);
extern void ali_m5229_init(struct pci_dev *dev);
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
/*
* We have to reset AMD PCnet adapter on Rockhopper since
* PMON leaves it enabled and generating interrupts. This leads
* to a lock if some PCI device driver later enables the IRQ line
* shared with PCnet and there is no AMD PCnet driver to catch its
* interrupts.
*/
#ifdef CONFIG_ROCKHOPPER
if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_LANCE) {
inl(pci_resource_start(dev, 0) + 0x18);
}
#endif
/*
* we have to open the bridges' windows down to 0 because otherwise
* we cannot access ISA south bridge I/O registers that get mapped from
* 0. for example, 8259 PIC would be unaccessible without that
*/
if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) {
pci_write_config_byte(dev, PCI_IO_BASE, 0);
if(dev->bus->number == 0) {
pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
} else {
pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1);
}
}
return 0;
}
/*
* M1535 IRQ mapping
* Feel free to change this, although it shouldn't be needed
*/
#define M1535_IRQ_INTA 7
#define M1535_IRQ_INTB 9
#define M1535_IRQ_INTC 10
#define M1535_IRQ_INTD 11
#define M1535_IRQ_USB 9
#define M1535_IRQ_IDE 14
#define M1535_IRQ_IDE2 15
#define M1535_IRQ_PS2 12
#define M1535_IRQ_RTC 8
#define M1535_IRQ_FDC 6
#define M1535_IRQ_AUDIO 5
#define M1535_IRQ_COM1 4
#define M1535_IRQ_COM2 4
#define M1535_IRQ_IRDA 3
#define M1535_IRQ_KBD 1
#define M1535_IRQ_TMR 0
/* Rockhopper "slots" assignment; this is hard-coded ... */
#define ROCKHOPPER_M5451_SLOT 1
#define ROCKHOPPER_M1535_SLOT 2
#define ROCKHOPPER_M5229_SLOT 11
#define ROCKHOPPER_M5237_SLOT 15
#define ROCKHOPPER_PMU_SLOT 12
/* ... and hard-wired. */
#define ROCKHOPPER_PCI1_SLOT 3
#define ROCKHOPPER_PCI2_SLOT 4
#define ROCKHOPPER_PCI3_SLOT 5
#define ROCKHOPPER_PCI4_SLOT 6
#define ROCKHOPPER_PCNET_SLOT 1
#define M1535_IRQ_MASK(n) (1 << (n))
#define M1535_IRQ_EDGE (M1535_IRQ_MASK(M1535_IRQ_TMR) | \
M1535_IRQ_MASK(M1535_IRQ_KBD) | \
M1535_IRQ_MASK(M1535_IRQ_COM1) | \
M1535_IRQ_MASK(M1535_IRQ_COM2) | \
M1535_IRQ_MASK(M1535_IRQ_IRDA) | \
M1535_IRQ_MASK(M1535_IRQ_RTC) | \
M1535_IRQ_MASK(M1535_IRQ_FDC) | \
M1535_IRQ_MASK(M1535_IRQ_PS2))
#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE) | \
M1535_IRQ_MASK(M1535_IRQ_USB) | \
M1535_IRQ_MASK(M1535_IRQ_INTA) | \
M1535_IRQ_MASK(M1535_IRQ_INTB) | \
M1535_IRQ_MASK(M1535_IRQ_INTC) | \
M1535_IRQ_MASK(M1535_IRQ_INTD))
struct irq_map_entry {
u16 bus;
u8 slot;
u8 irq;
};
static struct irq_map_entry int_map[] = {
{1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO}, /* Audio controller */
{1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD}, /* PCI slot #1 */
{1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC}, /* PCI slot #2 */
{1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB}, /* USB host controller */
{1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ}, /* IDE controller */
{2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD}, /* AMD Am79c973 on-board
ethernet */
{2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB}, /* PCI slot #3 */
{2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC} /* PCI slot #4 */
};
static int pci_intlines[] =
{ M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD };
/* Determine the Rockhopper IRQ line number for the PCI device */
int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot)
{
struct pci_bus *bus;
int i;
bus = dev->bus;
if (bus == NULL)
return -1;
for (i = 0; i < ARRAY_SIZE(int_map); i++) {
if (int_map[i].bus == bus->number && int_map[i].slot == slot) {
int line;
for (line = 0; line < 4; line++)
if (pci_intlines[line] == int_map[i].irq)
break;
if (line < 4)
return pci_intlines[(line + (pin - 1)) % 4];
else
return int_map[i].irq;
}
}
return -1;
}
#ifdef CONFIG_ROCKHOPPER
void i8259_init(void)
{
init_i8259_irqs();
outb(0x00, 0x4d0);
outb(0x02, 0x4d1); /* USB IRQ9 is level */
}
#endif
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
pci_probe_only = 1;
#ifdef CONFIG_ROCKHOPPER
if( dev->bus->number == 1 && vr4133_rockhopper ) {
if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT)
dev->irq = CMBVR41XX_INTA_IRQ;
else
dev->irq = rockhopper_get_irq(dev, pin, slot);
} else
dev->irq = CMBVR41XX_INTA_IRQ;
#else
dev->irq = CMBVR41XX_INTA_IRQ;
#endif
return dev->irq;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init);

View File

@ -23,16 +23,6 @@ config IBM_WORKPAD
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
config NEC_CMBVR4133
bool "NEC CMB-VR4133"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
select IRQ_CPU
select HW_HAS_PCI
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
config TANBAC_TB022X
bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
select CEVT_R4K
@ -73,13 +63,6 @@ config ZAO_CAPCELLA
endchoice
config ROCKHOPPER
bool "Support for Rockhopper base board"
depends on NEC_CMBVR4133
select PCI_VR41XX
select I8259
select HAVE_STD_PC_SERIAL_PORT
choice
prompt "Base board type"
depends on TANBAC_TB022X

View File

@ -1,8 +0,0 @@
#
# Makefile for the NEC-CMBVR4133
#
obj-y := init.o setup.o
obj-$(CONFIG_PCI) += m1535plus.o
obj-$(CONFIG_ROCKHOPPER) += irq.o

View File

@ -1,65 +0,0 @@
/*
* arch/mips/vr41xx/nec-cmbvr4133/init.c
*
* PROM library initialisation code for NEC CMB-VR4133 board.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Jun Sun <jsun@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for NEC-CMBVR4133 in 2.6
* Manish Lachwani (mlachwani@mvista.com)
*/
#ifdef CONFIG_ROCKHOPPER
#include <asm/io.h>
#include <linux/pci.h>
#define PCICONFDREG 0xaf000c14
#define PCICONFAREG 0xaf000c18
void disable_pcnet(void)
{
u32 data;
/*
* Workaround for the bug in PMON on VR4133. PMON leaves
* AMD PCNet controller (on Rockhopper) initialized and running in
* bus master mode. We have do disable it before doing any
* further initialization. Or we get problems with PCI bus 2
* and random lockups and crashes.
*/
writel((2 << 16) |
(PCI_DEVFN(1, 0) << 8) |
(0 & 0xfc) |
1UL,
PCICONFAREG);
data = readl(PCICONFDREG);
writel((2 << 16) |
(PCI_DEVFN(1, 0) << 8) |
(4 & 0xfc) |
1UL,
PCICONFAREG);
data = readl(PCICONFDREG);
writel((2 << 16) |
(PCI_DEVFN(1, 0) << 8) |
(4 & 0xfc) |
1UL,
PCICONFAREG);
data &= ~4;
writel(data, PCICONFDREG);
}
#endif

View File

@ -1,46 +0,0 @@
/*
* arch/mips/vr41xx/nec-cmbvr4133/irq.c
*
* Interrupt routines for the NEC CMB-VR4133 board.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for NEC-CMBVR4133 in 2.6
* Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/vr41xx/cmbvr4133.h>
extern int vr4133_rockhopper;
static int i8259_get_irq_number(int irq)
{
return i8259_irq();
}
void __init rockhopper_init_irq(void)
{
int i;
if(!vr4133_rockhopper) {
printk(KERN_ERR "Not a Rockhopper Board \n");
return;
}
vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH);
vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number);
}

View File

@ -1,249 +0,0 @@
/*
* arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
*
* Initialize for ALi M1535+(included M5229 and M5237).
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for NEC-CMBVR4133 in 2.6
* Author: Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/serial.h>
#include <asm/vr41xx/cmbvr4133.h>
#include <linux/pci.h>
#include <asm/io.h>
#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370)
#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371)
#define INDEX_PORT(port) CONFIG_PORT(port)
#define ENTER_CONFIG_MODE(port) \
do { \
outb_p(0x51, CONFIG_PORT(port)); \
outb_p(0x23, CONFIG_PORT(port)); \
} while(0)
#define SELECT_LOGICAL_DEVICE(port, dev_no) \
do { \
outb_p(0x07, INDEX_PORT(port)); \
outb_p((dev_no), DATA_PORT(port)); \
} while(0)
#define WRITE_CONFIG_DATA(port, index, data) \
do { \
outb_p((index), INDEX_PORT(port)); \
outb_p((data), DATA_PORT(port)); \
} while(0)
#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port))
#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18)
#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14)
#ifdef CONFIG_BLK_DEV_FD
void __devinit ali_m1535plus_fdc_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0); /* FDC */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */
WRITE_CONFIG_DATA(port, 0x61, 0xf0);
WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */
WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */
WRITE_CONFIG_DATA(port, 0xf0, 0x08);
WRITE_CONFIG_DATA(port, 0xf1, 0x00);
WRITE_CONFIG_DATA(port, 0xf2, 0xff);
WRITE_CONFIG_DATA(port, 0xf4, 0x00);
EXIT_CONFIG_MODE(port);
}
#endif
void __devinit ali_m1535plus_parport_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */
WRITE_CONFIG_DATA(port, 0x30, 0x01);
WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */
WRITE_CONFIG_DATA(port, 0x61, 0x78);
WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */
WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */
WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */
WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_keyboard_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */
WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */
WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */
WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */
WRITE_CONFIG_DATA(port, 0xf0, 0x00);
EXIT_CONFIG_MODE(port);
}
void __devinit ali_m1535plus_hotkey_init(int port)
{
ENTER_CONFIG_MODE(port);
SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */
WRITE_CONFIG_DATA(port, 0x30, 0x00);
WRITE_CONFIG_DATA(port, 0xf0, 0x35);
WRITE_CONFIG_DATA(port, 0xf1, 0x14);
WRITE_CONFIG_DATA(port, 0xf2, 0x11);
WRITE_CONFIG_DATA(port, 0xf3, 0x71);
WRITE_CONFIG_DATA(port, 0xf5, 0x05);
EXIT_CONFIG_MODE(port);
}
void ali_m1535plus_init(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
/* IRQ routing */
pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
pci_write_config_byte(dev, 0x5a, 0x00);
pci_write_config_byte(dev, 0x5b, 0x00);
pci_write_config_word(dev, 0x5c, 0x0000);
pci_write_config_byte(dev, 0x5e, 0x00);
pci_write_config_byte(dev, 0x5f, 0x00);
pci_write_config_word(dev, 0x60, 0x0000);
pci_write_config_byte(dev, 0x6c, 0x00);
pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
/*
* IRQ setup ALi M5237 USB Host Controller
* IRQ: 9
*/
pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */
pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
#ifdef CONFIG_BLK_DEV_FD
ali_m1535plus_fdc_init(1);
#endif
ali_m1535plus_keyboard_init(1);
ali_m1535plus_hotkey_init(1);
}
static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
{
u32 data;
int shift;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
shift = (reg & 3) << 3;
data &= ~(0xff << shift);
data |= (((u32)val) << shift);
writel(data, PCI_CONFIG_DATA);
}
static inline u8 ali_config_readb(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u8)(data >> ((reg & 3) << 3));
}
static inline u16 ali_config_readw(u8 reg, int devfn)
{
u32 data;
writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
data = readl(PCI_CONFIG_DATA);
return (u16)(data >> ((reg & 2) << 3));
}
int vr4133_rockhopper = 0;
void __init ali_m5229_preinit(void)
{
if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL &&
ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) {
printk(KERN_INFO "Found an NEC Rockhopper \n");
vr4133_rockhopper = 1;
/*
* Enable ALi M5229 IDE Controller (both channels)
* IDSEL: A27
*/
ali_config_writeb(0x58, 0x4c, 16);
}
}
void __init ali_m5229_init(struct pci_dev *dev)
{
/*
* Enable Primary/Secondary Channel Cable Detect 40-Pin
*/
pci_write_config_word(dev, 0x4a, 0xc023);
/*
* Set only the 3rd byteis for the master IDE's cycle and
* enable Internal IDE Function
*/
pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
pci_write_config_word(dev, PCI_COMMAND,
PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
PCI_COMMAND_IO);
}

View File

@ -1,89 +0,0 @@
/*
* arch/mips/vr41xx/nec-cmbvr4133/setup.c
*
* Setup for the NEC CMB-VR4133.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Support for CMBVR4133 board in 2.6
* Author: Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/ioport.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <asm/vr41xx/cmbvr4133.h>
#include <asm/bootinfo.h>
#ifdef CONFIG_MTD
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
static struct mtd_partition cmbvr4133_mtd_parts[] = {
{
.name = "User FS",
.size = 0x1be0000,
.offset = 0,
.mask_flags = 0,
},
{
.name = "PMON",
.size = 0x140000,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "User FS2",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
.mask_flags = 0,
}
};
#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts)
#endif
extern void i8259_init(void);
static void __init nec_cmbvr4133_setup(void)
{
#ifdef CONFIG_ROCKHOPPER
extern void disable_pcnet(void);
disable_pcnet();
#endif
set_io_port_base(KSEG1ADDR(0x16000000));
#ifdef CONFIG_PCI
#ifdef CONFIG_ROCKHOPPER
ali_m5229_preinit();
#endif
#endif
#ifdef CONFIG_ROCKHOPPER
rockhopper_init_irq();
#endif
#ifdef CONFIG_MTD
/* we use generic physmap mapping driver and we use partitions */
physmap_configure(0x1C000000, 0x02000000, 4, NULL);
physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions);
#endif
/* 128 MB memory support */
add_memory_region(0, 0x08000000, BOOT_MEM_RAM);
#ifdef CONFIG_ROCKHOPPER
i8259_init();
#endif
}

View File

@ -2,9 +2,6 @@
#define __ASM_MACH_VR41XX_IRQ_H
#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
#ifdef CONFIG_NEC_CMBVR4133
#include <asm/vr41xx/cmbvr4133.h> /* for I8259A_IRQ_BASE */
#endif
#include_next <irq.h>

View File

@ -1,56 +0,0 @@
/*
* include/asm-mips/vr41xx/cmbvr4133.h
*
* Include file for NEC CMB-VR4133.
*
* Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
* Jun Sun <jsun@mvista.com, or source@mvista.com> and
* Alex Sapkov <asapkov@ru.mvista.com>
*
* 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __NEC_CMBVR4133_H
#define __NEC_CMBVR4133_H
#include <asm/vr41xx/irq.h>
/*
* General-Purpose I/O Pin Number
*/
#define CMBVR41XX_INTA_PIN 1
#define CMBVR41XX_INTB_PIN 1
#define CMBVR41XX_INTC_PIN 3
#define CMBVR41XX_INTD_PIN 1
#define CMBVR41XX_INTE_PIN 1
/*
* Interrupt Number
*/
#define CMBVR41XX_INTA_IRQ GIU_IRQ(CMBVR41XX_INTA_PIN)
#define CMBVR41XX_INTB_IRQ GIU_IRQ(CMBVR41XX_INTB_PIN)
#define CMBVR41XX_INTC_IRQ GIU_IRQ(CMBVR41XX_INTC_PIN)
#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN)
#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN)
#define I8259A_IRQ_BASE 72
#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x))
#define TIMER_IRQ I8259_IRQ(0)
#define KEYBOARD_IRQ I8259_IRQ(1)
#define I8259_SLAVE_IRQ I8259_IRQ(2)
#define UART3_IRQ I8259_IRQ(3)
#define UART1_IRQ I8259_IRQ(4)
#define UART2_IRQ I8259_IRQ(5)
#define FDC_IRQ I8259_IRQ(6)
#define PARPORT_IRQ I8259_IRQ(7)
#define RTC_IRQ I8259_IRQ(8)
#define USB_IRQ I8259_IRQ(9)
#define I8259_INTA_IRQ I8259_IRQ(10)
#define AUDIO_IRQ I8259_IRQ(11)
#define AUX_IRQ I8259_IRQ(12)
#define IDE_PRIMARY_IRQ I8259_IRQ(14)
#define IDE_SECONDARY_IRQ I8259_IRQ(15)
#endif /* __NEC_CMBVR4133_H */