OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (30 commits)
  ACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the real module name.
  eeepc-laptop: fix oops when changing backlight brightness during eeepc-laptop init
  ACPICA: Fix table entry truncation calculation
  ACPI: Enable bit 11 in _PDC to advertise hw coord
  ACPI: struct device - replace bus_id with dev_name(), dev_set_name()
  ACPI: add missing KERN_* constants to printks
  ACPI: dock: Don't eval _STA on every show_docked sysfs read
  ACPI: disable ACPI cleanly when bad RSDP found
  ACPI: delete CPU_IDLE=n code
  ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries
  ACPI: make some IO ports off-limits to AML
  ACPICA: add debug dump of BIOS _OSI strings
  ACPI: proc_dir_entry 'video/VGA' already registered
  ACPI: Skip the first two elements in the _BCL package
  ACPI: remove BM_RLD access from idle entry path
  ACPI: remove locking from PM1x_STS register reads
  eeepc-laptop: use netlink interface
  eeepc-laptop: Implement rfkill hotplugging in eeepc-laptop
  eeepc-laptop: Check return values from rfkill_register
  eeepc-laptop: Add support for extended hotkeys
  ...
This commit is contained in:
Linus Torvalds 2009-02-07 08:30:20 -08:00
parent ccfef64621 2d29c6a075
commit f12b12a8ae
24 changed files with 480 additions and 900 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Documentation/cpu-freq/user-guide.txt
View File

@ -195,19 +195,3 @@ scaling_setspeed. By "echoing" a new frequency into this
you can change the speed of the CPU,
but only within the limits of
scaling_min_freq and scaling_max_freq.
3.2 Deprecated Interfaces
-------------------------
Depending on your kernel configuration, you might find the following
cpufreq-related files:
/proc/cpufreq
/proc/sys/cpu/*/speed
/proc/sys/cpu/*/speed-min
/proc/sys/cpu/*/speed-max
These are files for deprecated interfaces to cpufreq, which offer far
less functionality. Because of this, these interfaces aren't described
here.

4
arch/x86/kernel/acpi/sleep.c
View File

@ -156,11 +156,11 @@ static int __init acpi_sleep_setup(char *str)
#ifdef CONFIG_HIBERNATION
if (strncmp(str, "s4_nohwsig", 10) == 0)
acpi_no_s4_hw_signature();
if (strncmp(str, "s4_nonvs", 8) == 0)
acpi_s4_no_nvs();
#endif
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
if (strncmp(str, "s4_nonvs", 8) == 0)
acpi_s4_no_nvs();
str = strchr(str, ',');
if (str != NULL)
str += strspn(str, ", \t");

11
arch/x86/kernel/cpu/cpufreq/Kconfig
View File

@ -245,17 +245,6 @@ config X86_E_POWERSAVER
comment "shared options"
config X86_ACPI_CPUFREQ_PROC_INTF
bool "/proc/acpi/processor/../performance interface (deprecated)"
depends on PROC_FS
depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
help
This enables the deprecated /proc/acpi/processor/../performance
interface. While it is helpful for debugging, the generic,
cross-architecture cpufreq interfaces should be used.
If in doubt, say N.
config X86_SPEEDSTEP_LIB
tristate
default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)

3
drivers/acpi/Kconfig
View File

@ -9,6 +9,7 @@ menuconfig ACPI
depends on PCI
depends on PM
select PNP
select CPU_IDLE
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
@ -287,7 +288,7 @@ config ACPI_CONTAINER
support physical cpu/memory hot-plug.
If one selects "m", this driver can be loaded with
"modprobe acpi_container".
"modprobe container".
config ACPI_HOTPLUG_MEMORY
tristate "Memory Hotplug"

7
drivers/acpi/acpica/tbutils.c
View File

@ -538,10 +538,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags)
if (ACPI_FAILURE(status)) {
ACPI_WARNING((AE_INFO,
"Truncating %u table entries!",
(unsigned)
(acpi_gbl_root_table_list.size -
acpi_gbl_root_table_list.
count)));
(unsigned) (table_count -
(acpi_gbl_root_table_list.
count - 2))));
break;
}
}

21
drivers/acpi/acpica/uteval.c
View File

@ -116,9 +116,9 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Default return value is SUPPORTED */
/* Default return value is 0, NOT-SUPPORTED */
return_desc->integer.value = ACPI_UINT32_MAX;
return_desc->integer.value = 0;
walk_state->return_desc = return_desc;
/* Compare input string to static table of supported interfaces */
@ -127,10 +127,8 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
if (!ACPI_STRCMP
(string_desc->string.pointer,
acpi_interfaces_supported[i])) {
/* The interface is supported */
return_ACPI_STATUS(AE_OK);
return_desc->integer.value = ACPI_UINT32_MAX;
goto done;
}
}
@ -141,15 +139,14 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
*/
status = acpi_os_validate_interface(string_desc->string.pointer);
if (ACPI_SUCCESS(status)) {
/* The interface is supported */
return_ACPI_STATUS(AE_OK);
return_desc->integer.value = ACPI_UINT32_MAX;
}
/* The interface is not supported */
done:
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, "ACPI: BIOS _OSI(%s) %ssupported\n",
string_desc->string.pointer,
return_desc->integer.value == 0 ? "not-" : ""));
return_desc->integer.value = 0;
return_ACPI_STATUS(AE_OK);
}

5
drivers/acpi/container.c
View File

@ -163,7 +163,7 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context)
case ACPI_NOTIFY_BUS_CHECK:
/* Fall through */
case ACPI_NOTIFY_DEVICE_CHECK:
printk("Container driver received %s event\n",
printk(KERN_WARNING "Container driver received %s event\n",
(type == ACPI_NOTIFY_BUS_CHECK) ?
"ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
status = acpi_bus_get_device(handle, &device);
@ -174,7 +174,8 @@ static void container_notify_cb(acpi_handle handle, u32 type, void *context)
kobject_uevent(&device->dev.kobj,
KOBJ_ONLINE);
else
printk("Failed to add container\n");
printk(KERN_WARNING
"Failed to add container\n");
}
} else {
if (ACPI_SUCCESS(status)) {

14
drivers/acpi/dock.c
View File

@ -855,10 +855,14 @@ fdd_out:
static ssize_t show_docked(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct acpi_device *tmp;
struct dock_station *dock_station = *((struct dock_station **)
dev->platform_data);
return snprintf(buf, PAGE_SIZE, "%d\n", dock_present(dock_station));
if (ACPI_SUCCESS(acpi_bus_get_device(dock_station->handle, &tmp)))
return snprintf(buf, PAGE_SIZE, "1\n");
return snprintf(buf, PAGE_SIZE, "0\n");
}
static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
@ -984,7 +988,7 @@ static int dock_add(acpi_handle handle)
ret = device_create_file(&dock_device->dev, &dev_attr_docked);
if (ret) {
printk("Error %d adding sysfs file\n", ret);
printk(KERN_ERR "Error %d adding sysfs file\n", ret);
platform_device_unregister(dock_device);
kfree(dock_station);
dock_station = NULL;
@ -992,7 +996,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_undock);
if (ret) {
printk("Error %d adding sysfs file\n", ret);
printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
platform_device_unregister(dock_device);
kfree(dock_station);
@ -1001,7 +1005,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_uid);
if (ret) {
printk("Error %d adding sysfs file\n", ret);
printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
device_remove_file(&dock_device->dev, &dev_attr_undock);
platform_device_unregister(dock_device);
@ -1011,7 +1015,7 @@ static int dock_add(acpi_handle handle)
}
ret = device_create_file(&dock_device->dev, &dev_attr_flags);
if (ret) {
printk("Error %d adding sysfs file\n", ret);
printk(KERN_ERR "Error %d adding sysfs file\n", ret);
device_remove_file(&dock_device->dev, &dev_attr_docked);
device_remove_file(&dock_device->dev, &dev_attr_undock);
device_remove_file(&dock_device->dev, &dev_attr_uid);

2
drivers/acpi/ec.c
View File

@ -982,7 +982,7 @@ int __init acpi_ec_ecdt_probe(void)
saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!saved_ec)
return -ENOMEM;
memcpy(&saved_ec, boot_ec, sizeof(saved_ec));
memcpy(saved_ec, boot_ec, sizeof(*saved_ec));
/* fall through */
}
/* This workaround is needed only on some broken machines,

8
drivers/acpi/glue.c
View File

@ -255,12 +255,12 @@ static int acpi_platform_notify(struct device *dev)
}
type = acpi_get_bus_type(dev->bus);
if (!type) {
DBG("No ACPI bus support for %s\n", dev->bus_id);
DBG("No ACPI bus support for %s\n", dev_name(dev));
ret = -EINVAL;
goto end;
}
if ((ret = type->find_device(dev, &handle)) != 0)
DBG("Can't get handler for %s\n", dev->bus_id);
DBG("Can't get handler for %s\n", dev_name(dev));
end:
if (!ret)
acpi_bind_one(dev, handle);
@ -271,10 +271,10 @@ static int acpi_platform_notify(struct device *dev)
acpi_get_name(dev->archdata.acpi_handle,
ACPI_FULL_PATHNAME, &buffer);
DBG("Device %s -> %s\n", dev->bus_id, (char *)buffer.pointer);
DBG("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
kfree(buffer.pointer);
} else
DBG("Device %s -> No ACPI support\n", dev->bus_id);
DBG("Device %s -> No ACPI support\n", dev_name(dev));
#endif
return ret;

54
drivers/acpi/osl.c
View File

@ -228,10 +228,10 @@ void acpi_os_vprintf(const char *fmt, va_list args)
if (acpi_in_debugger) {
kdb_printf("%s", buffer);
} else {
printk("%s", buffer);
printk(KERN_CONT "%s", buffer);
}
#else
printk("%s", buffer);
printk(KERN_CONT "%s", buffer);
#endif
}
@ -1317,6 +1317,54 @@ acpi_os_validate_interface (char *interface)
return AE_SUPPORT;
}
#ifdef CONFIG_X86
struct aml_port_desc {
uint start;
uint end;
char* name;
char warned;
};
static struct aml_port_desc aml_invalid_port_list[] = {
{0x20, 0x21, "PIC0", 0},
{0xA0, 0xA1, "PIC1", 0},
{0x4D0, 0x4D1, "ELCR", 0}
};
/*
* valid_aml_io_address()
*
* if valid, return true
* else invalid, warn once, return false
*/
static bool valid_aml_io_address(uint address, uint length)
{
int i;
int entries = sizeof(aml_invalid_port_list) / sizeof(struct aml_port_desc);
for (i = 0; i < entries; ++i) {
if ((address >= aml_invalid_port_list[i].start &&
address <= aml_invalid_port_list[i].end) ||
(address + length >= aml_invalid_port_list[i].start &&
address + length <= aml_invalid_port_list[i].end))
{
if (!aml_invalid_port_list[i].warned)
{
printk(KERN_ERR "ACPI: Denied BIOS AML access"
" to invalid port 0x%x+0x%x (%s)\n",
address, length,
aml_invalid_port_list[i].name);
aml_invalid_port_list[i].warned = 1;
}
return false; /* invalid */
}
}
return true; /* valid */
}
#else
static inline bool valid_aml_io_address(uint address, uint length) { return true; }
#endif
/******************************************************************************
*
* FUNCTION: acpi_os_validate_address
@ -1346,6 +1394,8 @@ acpi_os_validate_address (
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
if (!valid_aml_io_address(address, length))
return AE_AML_ILLEGAL_ADDRESS;
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
/* Only interference checks against SystemIO and SytemMemory
are needed */

2
drivers/acpi/pci_link.c
View File

@ -593,7 +593,7 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link)
return -ENODEV;
} else {
acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING;
printk(PREFIX "%s [%s] enabled at IRQ %d\n",
printk(KERN_WARNING PREFIX "%s [%s] enabled at IRQ %d\n",
acpi_device_name(link->device),
acpi_device_bid(link->device), link->irq.active);
}

667
drivers/acpi/processor_idle.c
View File

@ -66,43 +66,17 @@ ACPI_MODULE_NAME("processor_idle");
#define ACPI_PROCESSOR_FILE_POWER "power"
#define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
#define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY)
#ifndef CONFIG_CPU_IDLE
#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */
#define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */
static void (*pm_idle_save) (void) __read_mostly;
#else
#define C2_OVERHEAD 1 /* 1us */
#define C3_OVERHEAD 1 /* 1us */
#endif
#define PM_TIMER_TICKS_TO_US(p) (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))
static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
#ifdef CONFIG_CPU_IDLE
module_param(max_cstate, uint, 0000);
#else
module_param(max_cstate, uint, 0644);
#endif
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);
#ifndef CONFIG_CPU_IDLE
/*
* bm_history -- bit-mask with a bit per jiffy of bus-master activity
* 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
* 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms
* 100 HZ: 0x0000000F: 4 jiffies = 40ms
* reduce history for more aggressive entry into C3
*/
static unsigned int bm_history __read_mostly =
(HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
module_param(bm_history, uint, 0644);
static int acpi_processor_set_power_policy(struct acpi_processor *pr);
#else /* CONFIG_CPU_IDLE */
static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);
#endif
/*
* IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
@ -224,71 +198,6 @@ static void acpi_safe_halt(void)
current_thread_info()->status |= TS_POLLING;
}
#ifndef CONFIG_CPU_IDLE
static void
acpi_processor_power_activate(struct acpi_processor *pr,
struct acpi_processor_cx *new)
{
struct acpi_processor_cx *old;
if (!pr || !new)
return;
old = pr->power.state;
if (old)
old->promotion.count = 0;
new->demotion.count = 0;
/* Cleanup from old state. */
if (old) {
switch (old->type) {
case ACPI_STATE_C3:
/* Disable bus master reload */
if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
break;
}
}
/* Prepare to use new state. */
switch (new->type) {
case ACPI_STATE_C3:
/* Enable bus master reload */
if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
break;
}
pr->power.state = new;
return;
}
static atomic_t c3_cpu_count;
/* Common C-state entry for C2, C3, .. */
static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
{
/* Don't trace irqs off for idle */
stop_critical_timings();
if (cstate->entry_method == ACPI_CSTATE_FFH) {
/* Call into architectural FFH based C-state */
acpi_processor_ffh_cstate_enter(cstate);
} else {
int unused;
/* IO port based C-state */
inb(cstate->address);
/* Dummy wait op - must do something useless after P_LVL2 read
because chipsets cannot guarantee that STPCLK# signal
gets asserted in time to freeze execution properly. */
unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
start_critical_timings();
}
#endif /* !CONFIG_CPU_IDLE */
#ifdef ARCH_APICTIMER_STOPS_ON_C3
/*
@ -390,421 +299,6 @@ static int tsc_halts_in_c(int state)
}
#endif
#ifndef CONFIG_CPU_IDLE
static void acpi_processor_idle(void)
{
struct acpi_processor *pr = NULL;
struct acpi_processor_cx *cx = NULL;
struct acpi_processor_cx *next_state = NULL;
int sleep_ticks = 0;
u32 t1, t2 = 0;
/*
* Interrupts must be disabled during bus mastering calculations and
* for C2/C3 transitions.
*/
local_irq_disable();
pr = __get_cpu_var(processors);
if (!pr) {
local_irq_enable();
return;
}
/*
* Check whether we truly need to go idle, or should
* reschedule:
*/
if (unlikely(need_resched())) {
local_irq_enable();
return;
}
cx = pr->power.state;
if (!cx || acpi_idle_suspend) {
if (pm_idle_save) {
pm_idle_save(); /* enables IRQs */
} else {
acpi_safe_halt();
local_irq_enable();
}
return;
}
/*
* Check BM Activity
* -----------------
* Check for bus mastering activity (if required), record, and check
* for demotion.
*/
if (pr->flags.bm_check) {
u32 bm_status = 0;
unsigned long diff = jiffies - pr->power.bm_check_timestamp;
if (diff > 31)
diff = 31;
pr->power.bm_activity <<= diff;
acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status) {
pr->power.bm_activity |= 0x1;
acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
}
/*
* PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
* the true state of bus mastering activity; forcing us to
* manually check the BMIDEA bit of each IDE channel.
*/
else if (errata.piix4.bmisx) {
if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
|| (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
pr->power.bm_activity |= 0x1;
}
pr->power.bm_check_timestamp = jiffies;
/*
* If bus mastering is or was active this jiffy, demote
* to avoid a faulty transition. Note that the processor
* won't enter a low-power state during this call (to this
* function) but should upon the next.
*
* TBD: A better policy might be to fallback to the demotion
* state (use it for this quantum only) istead of
* demoting -- and rely on duration as our sole demotion
* qualification. This may, however, introduce DMA
* issues (e.g. floppy DMA transfer overrun/underrun).
*/
if ((pr->power.bm_activity & 0x1) &&
cx->demotion.threshold.bm) {
local_irq_enable();
next_state = cx->demotion.state;
goto end;
}
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* Check for P_LVL2_UP flag before entering C2 and above on
* an SMP system. We do it here instead of doing it at _CST/P_LVL
* detection phase, to work cleanly with logical CPU hotplug.
*/
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
!pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
cx = &pr->power.states[ACPI_STATE_C1];
#endif
/*
* Sleep:
* ------
* Invoke the current Cx state to put the processor to sleep.
*/
if (cx->type == ACPI_STATE_C2 || cx->type == ACPI_STATE_C3) {
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
* test NEED_RESCHED:
*/
smp_mb();
if (need_resched()) {
current_thread_info()->status |= TS_POLLING;
local_irq_enable();
return;
}
}
switch (cx->type) {
case ACPI_STATE_C1:
/*
* Invoke C1.
* Use the appropriate idle routine, the one that would
* be used without acpi C-states.
*/
if (pm_idle_save) {
pm_idle_save(); /* enables IRQs */
} else {
acpi_safe_halt();
local_irq_enable();
}
/*
* TBD: Can't get time duration while in C1, as resumes
* go to an ISR rather than here. Need to instrument
* base interrupt handler.
*
* Note: the TSC better not stop in C1, sched_clock() will
* skew otherwise.
*/
sleep_ticks = 0xFFFFFFFF;
break;
case ACPI_STATE_C2:
/* Get start time (ticks) */
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
/* Invoke C2 */
acpi_state_timer_broadcast(pr, cx, 1);
acpi_cstate_enter(cx);
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C2, so notify users */
if (tsc_halts_in_c(ACPI_STATE_C2))
mark_tsc_unstable("possible TSC halt in C2");
#endif
/* Compute time (ticks) that we were actually asleep */
sleep_ticks = ticks_elapsed(t1, t2);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
/* Re-enable interrupts */
local_irq_enable();
/* Do not account our idle-switching overhead: */
sleep_ticks -= cx->latency_ticks + C2_OVERHEAD;
current_thread_info()->status |= TS_POLLING;
acpi_state_timer_broadcast(pr, cx, 0);
break;
case ACPI_STATE_C3:
acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might
* need to access HPET !
*/
acpi_state_timer_broadcast(pr, cx, 1);
/*
* disable bus master
* bm_check implies we need ARB_DIS
* !bm_check implies we need cache flush
* bm_control implies whether we can do ARB_DIS
*
* That leaves a case where bm_check is set and bm_control is
* not set. In that case we cannot do much, we enter C3
* without doing anything.
*/
if (pr->flags.bm_check && pr->flags.bm_control) {
if (atomic_inc_return(&c3_cpu_count) ==
num_online_cpus()) {
/*
* All CPUs are trying to go to C3
* Disable bus master arbitration
*/
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
} else if (!pr->flags.bm_check) {
/* SMP with no shared cache... Invalidate cache */
ACPI_FLUSH_CPU_CACHE();
}
/* Get start time (ticks) */
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C3 */
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
acpi_cstate_enter(cx);
/* Get end time (ticks) */
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
if (pr->flags.bm_check && pr->flags.bm_control) {
/* Enable bus master arbitration */
atomic_dec(&c3_cpu_count);
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
/* TSC halts in C3, so notify users */
if (tsc_halts_in_c(ACPI_STATE_C3))
mark_tsc_unstable("TSC halts in C3");
#endif
/* Compute time (ticks) that we were actually asleep */
sleep_ticks = ticks_elapsed(t1, t2);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
/* Re-enable interrupts */
local_irq_enable();
/* Do not account our idle-switching overhead: */
sleep_ticks -= cx->latency_ticks + C3_OVERHEAD;
current_thread_info()->status |= TS_POLLING;
acpi_state_timer_broadcast(pr, cx, 0);
break;
default:
local_irq_enable();
return;
}
cx->usage++;
if ((cx->type != ACPI_STATE_C1) && (sleep_ticks > 0))
cx->time += sleep_ticks;
next_state = pr->power.state;
#ifdef CONFIG_HOTPLUG_CPU
/* Don't do promotion/demotion */
if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
!pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) {
next_state = cx;
goto end;
}
#endif
/*
* Promotion?
* ----------
* Track the number of longs (time asleep is greater than threshold)
* and promote when the count threshold is reached. Note that bus
* mastering activity may prevent promotions.
* Do not promote above max_cstate.
*/
if (cx->promotion.state &&
((cx->promotion.state - pr->power.states) <= max_cstate)) {
if (sleep_ticks > cx->promotion.threshold.ticks &&
cx->promotion.state->latency <=
pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
cx->promotion.count++;
cx->demotion.count = 0;
if (cx->promotion.count >=
cx->promotion.threshold.count) {
if (pr->flags.bm_check) {
if (!
(pr->power.bm_activity & cx->
promotion.threshold.bm)) {
next_state =
cx->promotion.state;
goto end;
}
} else {
next_state = cx->promotion.state;
goto end;
}
}
}
}
/*
* Demotion?
* ---------
* Track the number of shorts (time asleep is less than time threshold)
* and demote when the usage threshold is reached.
*/
if (cx->demotion.state) {
if (sleep_ticks < cx->demotion.threshold.ticks) {
cx->demotion.count++;
cx->promotion.count = 0;
if (cx->demotion.count >= cx->demotion.threshold.count) {
next_state = cx->demotion.state;
goto end;
}
}
}
end:
/*
* Demote if current state exceeds max_cstate
* or if the latency of the current state is unacceptable
*/
if ((pr->power.state - pr->power.states) > max_cstate ||
pr->power.state->latency >
pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
if (cx->demotion.state)
next_state = cx->demotion.state;
}
/*
* New Cx State?
* -------------
* If we're going to start using a new Cx state we must clean up
* from the previous and prepare to use the new.
*/
if (next_state != pr->power.state)
acpi_processor_power_activate(pr, next_state);
}
static int acpi_processor_set_power_policy(struct acpi_processor *pr)
{
unsigned int i;
unsigned int state_is_set = 0;
struct acpi_processor_cx *lower = NULL;
struct acpi_processor_cx *higher = NULL;
struct acpi_processor_cx *cx;
if (!pr)
return -EINVAL;
/*
* This function sets the default Cx state policy (OS idle handler).
* Our scheme is to promote quickly to C2 but more conservatively
* to C3. We're favoring C2 for its characteristics of low latency
* (quick response), good power savings, and ability to allow bus
* mastering activity. Note that the Cx state policy is completely
* customizable and can be altered dynamically.
*/
/* startup state */
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
cx = &pr->power.states[i];
if (!cx->valid)
continue;
if (!state_is_set)
pr->power.state = cx;
state_is_set++;
break;
}
if (!state_is_set)
return -ENODEV;
/* demotion */
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
cx = &pr->power.states[i];
if (!cx->valid)
continue;
if (lower) {
cx->demotion.state = lower;
cx->demotion.threshold.ticks = cx->latency_ticks;
cx->demotion.threshold.count = 1;
if (cx->type == ACPI_STATE_C3)
cx->demotion.threshold.bm = bm_history;
}
lower = cx;
}
/* promotion */
for (i = (ACPI_PROCESSOR_MAX_POWER - 1); i > 0; i--) {
cx = &pr->power.states[i];
if (!cx->valid)
continue;
if (higher) {
cx->promotion.state = higher;
cx->promotion.threshold.ticks = cx->latency_ticks;
if (cx->type >= ACPI_STATE_C2)
cx->promotion.threshold.count = 4;
else
cx->promotion.threshold.count = 10;
if (higher->type == ACPI_STATE_C3)
cx->promotion.threshold.bm = bm_history;
}
higher = cx;
}
return 0;
}
#endif /* !CONFIG_CPU_IDLE */
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{
@ -1047,11 +541,7 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
*/
cx->valid = 1;
#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
#else
cx->latency_ticks = cx->latency;
#endif
return;
}
@ -1121,7 +611,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
" for C3 to be enabled on SMP systems\n"));
return;
}
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
}
/*
@ -1132,11 +621,16 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
*/
cx->valid = 1;
#ifndef CONFIG_CPU_IDLE
cx->latency_ticks = US_TO_PM_TIMER_TICKS(cx->latency);
#else
cx->latency_ticks = cx->latency;
#endif
/*
* On older chipsets, BM_RLD needs to be set
* in order for Bus Master activity to wake the
* system from C3. Newer chipsets handle DMA
* during C3 automatically and BM_RLD is a NOP.
* In either case, the proper way to
* handle BM_RLD is to set it and leave it set.
*/
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
return;
}
@ -1201,20 +695,6 @@ static int acpi_processor_get_power_info(struct acpi_processor *pr)
pr->power.count = acpi_processor_power_verify(pr);
#ifndef CONFIG_CPU_IDLE
/*
* Set Default Policy
* ------------------
* Now that we know which states are supported, set the default
* policy. Note that this policy can be changed dynamically
* (e.g. encourage deeper sleeps to conserve battery life when
* not on AC).
*/
result = acpi_processor_set_power_policy(pr);
if (result)
return result;
#endif
/*
* if one state of type C2 or C3 is available, mark this
* CPU as being "idle manageable"
@ -1312,69 +792,6 @@ static const struct file_operations acpi_processor_power_fops = {
.release = single_release,
};
#ifndef CONFIG_CPU_IDLE
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
int result = 0;
if (boot_option_idle_override)
return 0;
if (!pr)
return -EINVAL;
if (nocst) {
return -ENODEV;
}
if (!pr->flags.power_setup_done)
return -ENODEV;
/*
* Fall back to the default idle loop, when pm_idle_save had
* been initialized.
*/
if (pm_idle_save) {
pm_idle = pm_idle_save;
/* Relies on interrupts forcing exit from idle. */
synchronize_sched();
}
pr->flags.power = 0;
result = acpi_processor_get_power_info(pr);
if ((pr->flags.power == 1) && (pr->flags.power_setup_done))
pm_idle = acpi_processor_idle;
return result;
}
#ifdef CONFIG_SMP
static void smp_callback(void *v)
{
/* we already woke the CPU up, nothing more to do */
}
/*
* This function gets called when a part of the kernel has a new latency
* requirement. This means we need to get all processors out of their C-state,
* and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that
* wakes them all right up.
*/
static int acpi_processor_latency_notify(struct notifier_block *b,
unsigned long l, void *v)
{
smp_call_function(smp_callback, NULL, 1);
return NOTIFY_OK;
}
static struct notifier_block acpi_processor_latency_notifier = {
.notifier_call = acpi_processor_latency_notify,
};
#endif
#else /* CONFIG_CPU_IDLE */
/**
* acpi_idle_bm_check - checks if bus master activity was detected
@ -1383,7 +800,7 @@ static int acpi_idle_bm_check(void)
{
u32 bm_status = 0;
acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
acpi_get_register_unlocked(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status)
acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
/*
@ -1399,25 +816,6 @@ static int acpi_idle_bm_check(void)
return bm_status;
}
/**
* acpi_idle_update_bm_rld - updates the BM_RLD bit depending on target state
* @pr: the processor
* @target: the new target state
*/
static inline void acpi_idle_update_bm_rld(struct acpi_processor *pr,
struct acpi_processor_cx *target)
{
if (pr->flags.bm_rld_set && target->type != ACPI_STATE_C3) {
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
pr->flags.bm_rld_set = 0;
}
if (!pr->flags.bm_rld_set && target->type == ACPI_STATE_C3) {
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
pr->flags.bm_rld_set = 1;
}
}
/**
* acpi_idle_do_entry - a helper function that does C2 and C3 type entry
* @cx: cstate data
@ -1473,9 +871,6 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
return 0;
}
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
acpi_idle_do_entry(cx);
t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
@ -1527,9 +922,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
*/
acpi_state_timer_broadcast(pr, cx, 1);
if (pr->flags.bm_check)
acpi_idle_update_bm_rld(pr, cx);
if (cx->type == ACPI_STATE_C3)
ACPI_FLUSH_CPU_CACHE();
@ -1621,8 +1013,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
*/
acpi_state_timer_broadcast(pr, cx, 1);
acpi_idle_update_bm_rld(pr, cx);
/*
* disable bus master
* bm_check implies we need ARB_DIS
@ -1795,8 +1185,6 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
return ret;
}
#endif /* CONFIG_CPU_IDLE */
int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
struct acpi_device *device)
{
@ -1825,10 +1213,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
"ACPI: processor limited to max C-state %d\n",
max_cstate);
first_run++;
#if !defined(CONFIG_CPU_IDLE) && defined(CONFIG_SMP)
pm_qos_add_notifier(PM_QOS_CPU_DMA_LATENCY,
&acpi_processor_latency_notifier);
#endif
}
if (!pr)
@ -1852,11 +1236,9 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
* platforms that only support C1.
*/
if (pr->flags.power) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
for (i = 1; i <= pr->power.count; i++)
@ -1864,13 +1246,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
printk(" C%d[C%d]", i,
pr->power.states[i].type);
printk(")\n");
#ifndef CONFIG_CPU_IDLE
if (pr->id == 0) {
pm_idle_save = pm_idle;
pm_idle = acpi_processor_idle;
}
#endif
}
/* 'power' [R] */
@ -1889,34 +1264,12 @@ int acpi_processor_power_exit(struct acpi_processor *pr,
if (boot_option_idle_override)
return 0;
#ifdef CONFIG_CPU_IDLE
cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
if (acpi_device_dir(device))
remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
acpi_device_dir(device));
#ifndef CONFIG_CPU_IDLE
/* Unregister the idle handler when processor #0 is removed. */
if (pr->id == 0) {
if (pm_idle_save)
pm_idle = pm_idle_save;
/*
* We are about to unload the current idle thread pm callback
* (pm_idle), Wait for all processors to update cached/local
* copies of pm_idle before proceeding.
*/
cpu_idle_wait();
#ifdef CONFIG_SMP
pm_qos_remove_notifier(PM_QOS_CPU_DMA_LATENCY,
&acpi_processor_latency_notifier);
#endif
}
#endif
return 0;
}

105
drivers/acpi/processor_perflib.c
View File

@ -31,14 +31,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
#endif
#ifdef CONFIG_X86
#include <asm/cpufeature.h>
#endif
@ -434,96 +426,6 @@ int acpi_processor_notify_smm(struct module *calling_module)
EXPORT_SYMBOL(acpi_processor_notify_smm);
#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
/* /proc/acpi/processor/../performance interface (DEPRECATED) */
static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
static struct file_operations acpi_processor_perf_fops = {
.owner = THIS_MODULE,
.open = acpi_processor_perf_open_fs,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
{
struct acpi_processor *pr = seq->private;
int i;
if (!pr)
goto end;
if (!pr->performance) {
seq_puts(seq, "<not supported>\n");
goto end;
}
seq_printf(seq, "state count: %d\n"
"active state: P%d\n",
pr->performance->state_count, pr->performance->state);
seq_puts(seq, "states:\n");
for (i = 0; i < pr->performance->state_count; i++)
seq_printf(seq,
" %cP%d: %d MHz, %d mW, %d uS\n",
(i == pr->performance->state ? '*' : ' '), i,
(u32) pr->performance->states[i].core_frequency,
(u32) pr->performance->states[i].power,
(u32) pr->performance->states[i].transition_latency);
end:
return 0;
}
static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
{
return single_open(file, acpi_processor_perf_seq_show,
PDE(inode)->data);
}
static void acpi_cpufreq_add_file(struct acpi_processor *pr)
{
struct acpi_device *device = NULL;
if (acpi_bus_get_device(pr->handle, &device))
return;
/* add file 'performance' [R/W] */
proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO,
acpi_device_dir(device),
&acpi_processor_perf_fops, acpi_driver_data(device));
return;
}
static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
{
struct acpi_device *device = NULL;
if (acpi_bus_get_device(pr->handle, &device))
return;
/* remove file 'performance' */
remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
acpi_device_dir(device));
return;
}
#else
static void acpi_cpufreq_add_file(struct acpi_processor *pr)
{
return;
}
static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
{
return;
}
#endif /* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
static int acpi_processor_get_psd(struct acpi_processor *pr)
{
int result = 0;
@ -747,14 +649,12 @@ err_ret:
}
EXPORT_SYMBOL(acpi_processor_preregister_performance);
int
acpi_processor_register_performance(struct acpi_processor_performance
*performance, unsigned int cpu)
{
struct acpi_processor *pr;
if (!(acpi_processor_ppc_status & PPC_REGISTERED))
return -EINVAL;
@ -781,8 +681,6 @@ acpi_processor_register_performance(struct acpi_processor_performance
return -EIO;
}
acpi_cpufreq_add_file(pr);
mutex_unlock(&performance_mutex);
return 0;
}
@ -795,7 +693,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
{
struct acpi_processor *pr;
mutex_lock(&performance_mutex);
pr = per_cpu(processors, cpu);
@ -808,8 +705,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
kfree(pr->performance->states);
pr->performance = NULL;
acpi_cpufreq_remove_file(pr);
mutex_unlock(&performance_mutex);
return;

53
drivers/acpi/sleep.c
View File

@ -90,31 +90,6 @@ void __init acpi_old_suspend_ordering(void)
old_suspend_ordering = true;
}
/*
* According to the ACPI specification the BIOS should make sure that ACPI is
* enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
* some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
* on such systems during resume. Unfortunately that doesn't help in
* particularly pathological cases in which SCI_EN has to be set directly on
* resume, although the specification states very clearly that this flag is
* owned by the hardware. The set_sci_en_on_resume variable will be set in such
* cases.
*/
static bool set_sci_en_on_resume;
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. However, it is not certain
* if this mechanism is going to work on all machines, so we allow the user to
* disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
* option.
*/
static bool s4_no_nvs;
void __init acpi_s4_no_nvs(void)
{
s4_no_nvs = true;
}
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
@ -193,6 +168,18 @@ static void acpi_pm_end(void)
#endif /* CONFIG_ACPI_SLEEP */
#ifdef CONFIG_SUSPEND
/*
* According to the ACPI specification the BIOS should make sure that ACPI is
* enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
* some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
* on such systems during resume. Unfortunately that doesn't help in
* particularly pathological cases in which SCI_EN has to be set directly on
* resume, although the specification states very clearly that this flag is
* owned by the hardware. The set_sci_en_on_resume variable will be set in such
* cases.
*/
static bool set_sci_en_on_resume;
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
@ -396,6 +383,20 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATION
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. However, it is not certain
* if this mechanism is going to work on all machines, so we allow the user to
* disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line
* option.
*/
static bool s4_no_nvs;
void __init acpi_s4_no_nvs(void)
{
s4_no_nvs = true;
}
static unsigned long s4_hardware_signature;
static struct acpi_table_facs *facs;
static bool nosigcheck;
@ -679,7 +680,7 @@ static void acpi_power_off_prepare(void)
static void acpi_power_off(void)
{
/* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
printk("%s called\n", __func__);
printk(KERN_DEBUG "%s called\n", __func__);
local_irq_disable();
acpi_enable_wakeup_device(ACPI_STATE_S5);
acpi_enter_sleep_state(ACPI_STATE_S5);

7
drivers/acpi/tables.c
View File

@ -293,7 +293,12 @@ static void __init check_multiple_madt(void)
int __init acpi_table_init(void)
{
acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
acpi_status status;
status = acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
if (ACPI_FAILURE(status))
return 1;
check_multiple_madt();
return 0;
}

16
drivers/acpi/video.c
View File

@ -1020,7 +1020,7 @@ acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset)
}
seq_printf(seq, "levels: ");
for (i = 0; i < dev->brightness->count; i++)
for (i = 2; i < dev->brightness->count; i++)
seq_printf(seq, " %d", dev->brightness->levels[i]);
seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr);
@ -1059,7 +1059,7 @@ acpi_video_device_write_brightness(struct file *file,
return -EFAULT;
/* validate through the list of available levels */
for (i = 0; i < dev->brightness->count; i++)
for (i = 2; i < dev->brightness->count; i++)
if (level == dev->brightness->levels[i]) {
if (ACPI_SUCCESS
(acpi_video_device_lcd_set_level(dev, level)))
@ -1260,7 +1260,7 @@ static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset)
printk(KERN_WARNING PREFIX
"This indicates a BIOS bug. Please contact the manufacturer.\n");
}
printk("%llx\n", options);
printk(KERN_WARNING "%llx\n", options);
seq_printf(seq, "can POST: <integrated video>");
if (options & 2)
seq_printf(seq, " <PCI video>");
@ -1712,7 +1712,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
max = max_below = 0;
min = min_above = 255;
/* Find closest level to level_current */
for (i = 0; i < device->brightness->count; i++) {
for (i = 2; i < device->brightness->count; i++) {
l = device->brightness->levels[i];
if (abs(l - level_current) < abs(delta)) {
delta = l - level_current;
@ -1722,7 +1722,7 @@ acpi_video_get_next_level(struct acpi_video_device *device,
}
/* Ajust level_current to closest available level */
level_current += delta;
for (i = 0; i < device->brightness->count; i++) {
for (i = 2; i < device->brightness->count; i++) {
l = device->brightness->levels[i];
if (l < min)
min = l;
@ -2006,6 +2006,12 @@ static int acpi_video_bus_add(struct acpi_device *device)
device->pnp.bus_id[3] = '0' + instance;
instance ++;
}
/* a hack to fix the duplicate name "VGA" problem on Pa 3553 */
if (!strcmp(device->pnp.bus_id, "VGA")) {
if (instance)
device->pnp.bus_id[3] = '0' + instance;
instance++;
}
video->device = device;
strcpy(acpi_device_name(device), ACPI_VIDEO_BUS_NAME);

1
drivers/platform/x86/Kconfig
View File

@ -42,6 +42,7 @@ config ASUS_LAPTOP
depends on LEDS_CLASS
depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate

174
drivers/platform/x86/asus-laptop.c
View File

@ -46,6 +46,7 @@
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
#include <linux/input.h>
#define ASUS_LAPTOP_VERSION "0.42"
@ -181,6 +182,8 @@ struct asus_hotk {
u8 light_level; //light sensor level
u8 light_switch; //light sensor switch value
u16 event_count[128]; //count for each event TODO make this better
struct input_dev *inputdev;
u16 *keycode_map;
};
/*
@ -250,6 +253,37 @@ ASUS_LED(rled, "record");
ASUS_LED(pled, "phone");
ASUS_LED(gled, "gaming");
struct key_entry {
char type;
u8 code;
u16 keycode;
};
enum { KE_KEY, KE_END };
static struct key_entry asus_keymap[] = {
{KE_KEY, 0x30, KEY_VOLUMEUP},
{KE_KEY, 0x31, KEY_VOLUMEDOWN},
{KE_KEY, 0x32, KEY_MUTE},
{KE_KEY, 0x33, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x40, KEY_PREVIOUSSONG},
{KE_KEY, 0x41, KEY_NEXTSONG},
{KE_KEY, 0x43, KEY_STOP},
{KE_KEY, 0x45, KEY_PLAYPAUSE},
{KE_KEY, 0x50, KEY_EMAIL},
{KE_KEY, 0x51, KEY_WWW},
{KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */
{KE_KEY, 0x5D, KEY_WLAN},
{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
{KE_KEY, 0x82, KEY_CAMERA},
{KE_KEY, 0x8A, KEY_TV},
{KE_KEY, 0x95, KEY_MEDIA},
{KE_KEY, 0x99, KEY_PHONE},
{KE_END, 0},
};
/*
* This function evaluates an ACPI method, given an int as parameter, the
* method is searched within the scope of the handle, can be NULL. The output
@ -720,8 +754,68 @@ static ssize_t store_gps(struct device *dev, struct device_attribute *attr,
return store_status(buf, count, NULL, GPS_ON);
}
/*
* Hotkey functions
*/
static struct key_entry *asus_get_entry_by_scancode(int code)
{
struct key_entry *key;
for (key = asus_keymap; key->type != KE_END; key++)
if (code == key->code)
return key;
return NULL;
}
static struct key_entry *asus_get_entry_by_keycode(int code)
{
struct key_entry *key;
for (key = asus_keymap; key->type != KE_END; key++)
if (code == key->keycode && key->type == KE_KEY)
return key;
return NULL;
}
static int asus_getkeycode(struct input_dev *dev, int scancode, int *keycode)
{
struct key_entry *key = asus_get_entry_by_scancode(scancode);
if (key && key->type == KE_KEY) {
*keycode = key->keycode;
return 0;
}
return -EINVAL;
}
static int asus_setkeycode(struct input_dev *dev, int scancode, int keycode)
{
struct key_entry *key;
int old_keycode;
if (keycode < 0 || keycode > KEY_MAX)
return -EINVAL;
key = asus_get_entry_by_scancode(scancode);
if (key && key->type == KE_KEY) {
old_keycode = key->keycode;
key->keycode = keycode;
set_bit(keycode, dev->keybit);
if (!asus_get_entry_by_keycode(old_keycode))
clear_bit(old_keycode, dev->keybit);
return 0;
}
return -EINVAL;
}
static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
@ -738,10 +832,24 @@ static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
lcd_blank(FB_BLANK_POWERDOWN);
}
acpi_bus_generate_proc_event(hotk->device, event,
hotk->event_count[event % 128]++);
acpi_bus_generate_netlink_event(hotk->device->pnp.device_class,
dev_name(&hotk->device->dev), event,
hotk->event_count[event % 128]++);
return;
if (hotk->inputdev) {
key = asus_get_entry_by_scancode(event);
if (!key)
return ;
switch (key->type) {
case KE_KEY:
input_report_key(hotk->inputdev, key->keycode, 1);
input_sync(hotk->inputdev);
input_report_key(hotk->inputdev, key->keycode, 0);
input_sync(hotk->inputdev);
break;
}
}
}
#define ASUS_CREATE_DEVICE_ATTR(_name) \
@ -959,6 +1067,38 @@ static int asus_hotk_get_info(void)
return AE_OK;
}
static int asus_input_init(void)
{
const struct key_entry *key;
int result;
hotk->inputdev = input_allocate_device();
if (!hotk->inputdev) {
printk(ASUS_INFO "Unable to allocate input device\n");
return 0;
}
hotk->inputdev->name = "Asus Laptop extra buttons";
hotk->inputdev->phys = ASUS_HOTK_FILE "/input0";
hotk->inputdev->id.bustype = BUS_HOST;
hotk->inputdev->getkeycode = asus_getkeycode;
hotk->inputdev->setkeycode = asus_setkeycode;
for (key = asus_keymap; key->type != KE_END; key++) {
switch (key->type) {
case KE_KEY:
set_bit(EV_KEY, hotk->inputdev->evbit);
set_bit(key->keycode, hotk->inputdev->keybit);
break;
}
}
result = input_register_device(hotk->inputdev);
if (result) {
printk(ASUS_INFO "Unable to register input device\n");
input_free_device(hotk->inputdev);
}
return result;
}
static int asus_hotk_check(void)
{
int result = 0;
@ -1044,7 +1184,7 @@ static int asus_hotk_add(struct acpi_device *device)
/* GPS is on by default */
write_status(NULL, 1, GPS_ON);
end:
end:
if (result) {
kfree(hotk->name);
kfree(hotk);
@ -1091,10 +1231,17 @@ static void asus_led_exit(void)
ASUS_LED_UNREGISTER(gled);
}
static void asus_input_exit(void)
{
if (hotk->inputdev)
input_unregister_device(hotk->inputdev);
}
static void __exit asus_laptop_exit(void)
{
asus_backlight_exit();
asus_led_exit();
asus_input_exit();
acpi_bus_unregister_driver(&asus_hotk_driver);
sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group);
@ -1216,6 +1363,10 @@ static int __init asus_laptop_init(void)
printk(ASUS_INFO "Brightness ignored, must be controlled by "
"ACPI video driver\n");
result = asus_input_init();
if (result)
goto fail_input;
result = asus_led_init(dev);
if (result)
goto fail_led;
@ -1242,22 +1393,25 @@ static int __init asus_laptop_init(void)
return 0;
fail_sysfs:
fail_sysfs:
platform_device_del(asuspf_device);
fail_platform_device2:
fail_platform_device2:
platform_device_put(asuspf_device);
fail_platform_device1:
fail_platform_device1:
platform_driver_unregister(&asuspf_driver);
fail_platform_driver:
fail_platform_driver:
asus_led_exit();
fail_led:
fail_led:
asus_input_exit();
fail_input:
asus_backlight_exit();
fail_backlight:
fail_backlight:
return result;
}

16
drivers/platform/x86/asus_acpi.c
View File

@ -143,6 +143,7 @@ struct asus_hotk {
S1300N, S5200N*/
A4S, /* Z81sp */
F3Sa, /* (Centrino) */
R1F,
END_MODEL
} model; /* Models currently supported */
u16 event_count[128]; /* Count for each event TODO make this better */
@ -420,7 +421,18 @@ static struct model_data model_conf[END_MODEL] = {
.display_get = "\\ADVG",
.display_set = "SDSP",
},
{
.name = "R1F",
.mt_bt_switch = "BLED",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\GP06",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"
}
};
/* procdir we use */
@ -1165,6 +1177,8 @@ static int asus_model_match(char *model)
return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
else if (strncmp(model, "R1F", 3) == 0)
return R1F;
else if (strncmp(model, "A4S", 3) == 0)
return A4S;
else if (strncmp(model, "F3Sa", 4) == 0)

164
drivers/platform/x86/eeepc-laptop.c
View File

@ -30,6 +30,7 @@
#include <linux/uaccess.h>
#include <linux/input.h>
#include <linux/rfkill.h>
#include <linux/pci.h>
#define EEEPC_LAPTOP_VERSION "0.1"
@ -161,6 +162,10 @@ static struct key_entry eeepc_keymap[] = {
{KE_KEY, 0x13, KEY_MUTE },
{KE_KEY, 0x14, KEY_VOLUMEDOWN },
{KE_KEY, 0x15, KEY_VOLUMEUP },
{KE_KEY, 0x1a, KEY_COFFEE },
{KE_KEY, 0x1b, KEY_ZOOM },
{KE_KEY, 0x1c, KEY_PROG2 },
{KE_KEY, 0x1d, KEY_PROG3 },
{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
@ -510,7 +515,43 @@ static int eeepc_hotk_check(void)
static void notify_brn(void)
{
struct backlight_device *bd = eeepc_backlight_device;
bd->props.brightness = read_brightness(bd);
if (bd)
bd->props.brightness = read_brightness(bd);
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
if (!bus) {
printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
return;
}
if (get_acpi(CM_ASL_WLAN) == 1) {
dev = pci_get_slot(bus, 0);
if (dev) {
/* Device already present */
pci_dev_put(dev);
return;
}
dev = pci_scan_single_device(bus, 0);
if (dev) {
pci_bus_assign_resources(bus);
if (pci_bus_add_device(dev))
printk(EEEPC_ERR "Unable to hotplug wifi\n");
}
} else {
dev = pci_get_slot(bus, 0);
if (dev) {
pci_remove_bus_device(dev);
pci_dev_put(dev);
}
}
}
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
@ -520,8 +561,9 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
notify_brn();
acpi_bus_generate_proc_event(ehotk->device, event,
ehotk->event_count[event % 128]++);
acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
dev_name(&ehotk->device->dev), event,
ehotk->event_count[event % 128]++);
if (ehotk->inputdev) {
key = eepc_get_entry_by_scancode(event);
if (key) {
@ -539,6 +581,45 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
}
}
static int eeepc_register_rfkill_notifier(char *node)
{
acpi_status status = AE_OK;
acpi_handle handle;
status = acpi_get_handle(NULL, node, &handle);
if (ACPI_SUCCESS(status)) {
status = acpi_install_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify,
NULL);
if (ACPI_FAILURE(status))
printk(EEEPC_WARNING
"Failed to register notify on %s\n", node);
} else
return -ENODEV;
return 0;
}
static void eeepc_unregister_rfkill_notifier(char *node)
{
acpi_status status = AE_OK;
acpi_handle handle;
status = acpi_get_handle(NULL, node, &handle);
if (ACPI_SUCCESS(status)) {
status = acpi_remove_notify_handler(handle,
ACPI_SYSTEM_NOTIFY,
eeepc_rfkill_notify);
if (ACPI_FAILURE(status))
printk(EEEPC_ERR
"Error removing rfkill notify handler %s\n",
node);
}
}
static int eeepc_hotk_add(struct acpi_device *device)
{
acpi_status status = AE_OK;
@ -558,7 +639,7 @@ static int eeepc_hotk_add(struct acpi_device *device)
ehotk->device = device;
result = eeepc_hotk_check();
if (result)
goto end;
goto ehotk_fail;
status = acpi_install_notify_handler(ehotk->handle, ACPI_SYSTEM_NOTIFY,
eeepc_hotk_notify, ehotk);
if (ACPI_FAILURE(status))
@ -569,18 +650,25 @@ static int eeepc_hotk_add(struct acpi_device *device)
RFKILL_TYPE_WLAN);
if (!ehotk->eeepc_wlan_rfkill)
goto end;
goto wlan_fail;
ehotk->eeepc_wlan_rfkill->name = "eeepc-wlan";
ehotk->eeepc_wlan_rfkill->toggle_radio = eeepc_wlan_rfkill_set;
ehotk->eeepc_wlan_rfkill->get_state = eeepc_wlan_rfkill_state;
if (get_acpi(CM_ASL_WLAN) == 1)
if (get_acpi(CM_ASL_WLAN) == 1) {
ehotk->eeepc_wlan_rfkill->state =
RFKILL_STATE_UNBLOCKED;
else
rfkill_set_default(RFKILL_TYPE_WLAN,
RFKILL_STATE_UNBLOCKED);
} else {
ehotk->eeepc_wlan_rfkill->state =
RFKILL_STATE_SOFT_BLOCKED;
rfkill_register(ehotk->eeepc_wlan_rfkill);
rfkill_set_default(RFKILL_TYPE_WLAN,
RFKILL_STATE_SOFT_BLOCKED);
}
result = rfkill_register(ehotk->eeepc_wlan_rfkill);
if (result)
goto wlan_fail;
}
if (get_acpi(CM_ASL_BLUETOOTH) != -1) {
@ -588,27 +676,47 @@ static int eeepc_hotk_add(struct acpi_device *device)
rfkill_allocate(&device->dev, RFKILL_TYPE_BLUETOOTH);
if (!ehotk->eeepc_bluetooth_rfkill)
goto end;
goto bluetooth_fail;
ehotk->eeepc_bluetooth_rfkill->name = "eeepc-bluetooth";
ehotk->eeepc_bluetooth_rfkill->toggle_radio =
eeepc_bluetooth_rfkill_set;
ehotk->eeepc_bluetooth_rfkill->get_state =
eeepc_bluetooth_rfkill_state;
if (get_acpi(CM_ASL_BLUETOOTH) == 1)
if (get_acpi(CM_ASL_BLUETOOTH) == 1) {
ehotk->eeepc_bluetooth_rfkill->state =
RFKILL_STATE_UNBLOCKED;
else
rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
RFKILL_STATE_UNBLOCKED);
} else {
ehotk->eeepc_bluetooth_rfkill->state =
RFKILL_STATE_SOFT_BLOCKED;
rfkill_register(ehotk->eeepc_bluetooth_rfkill);
rfkill_set_default(RFKILL_TYPE_BLUETOOTH,
RFKILL_STATE_SOFT_BLOCKED);
}
result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
if (result)
goto bluetooth_fail;
}
end:
if (result) {
kfree(ehotk);
ehotk = NULL;
}
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
return 0;
bluetooth_fail:
if (ehotk->eeepc_bluetooth_rfkill)
rfkill_free(ehotk->eeepc_bluetooth_rfkill);
rfkill_unregister(ehotk->eeepc_wlan_rfkill);
ehotk->eeepc_wlan_rfkill = NULL;
wlan_fail:
if (ehotk->eeepc_wlan_rfkill)
rfkill_free(ehotk->eeepc_wlan_rfkill);
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
return result;
}
@ -622,6 +730,10 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type)
eeepc_hotk_notify);
if (ACPI_FAILURE(status))
printk(EEEPC_ERR "Error removing notify handler\n");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
kfree(ehotk);
return 0;
}
@ -737,13 +849,21 @@ static void eeepc_backlight_exit(void)
{
if (eeepc_backlight_device)
backlight_device_unregister(eeepc_backlight_device);
if (ehotk->inputdev)
input_unregister_device(ehotk->inputdev);
eeepc_backlight_device = NULL;
}
static void eeepc_rfkill_exit(void)
{
if (ehotk->eeepc_wlan_rfkill)
rfkill_unregister(ehotk->eeepc_wlan_rfkill);
if (ehotk->eeepc_bluetooth_rfkill)
rfkill_unregister(ehotk->eeepc_bluetooth_rfkill);
eeepc_backlight_device = NULL;
}
static void eeepc_input_exit(void)
{
if (ehotk->inputdev)
input_unregister_device(ehotk->inputdev);
}
static void eeepc_hwmon_exit(void)
@ -762,6 +882,8 @@ static void eeepc_hwmon_exit(void)
static void __exit eeepc_laptop_exit(void)
{
eeepc_backlight_exit();
eeepc_rfkill_exit();
eeepc_input_exit();
eeepc_hwmon_exit();
acpi_bus_unregister_driver(&eeepc_hotk_driver);
sysfs_remove_group(&platform_device->dev.kobj,
@ -865,6 +987,8 @@ fail_platform_driver:
fail_hwmon:
eeepc_backlight_exit();
fail_backlight:
eeepc_input_exit();
eeepc_rfkill_exit();
return result;
}

2
drivers/platform/x86/panasonic-laptop.c
View File

@ -507,7 +507,7 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc)
hkey_num = result & 0xf;
if (hkey_num < 0 || hkey_num > ARRAY_SIZE(pcc->keymap)) {
if (hkey_num < 0 || hkey_num >= ARRAY_SIZE(pcc->keymap)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
"hotkey number out of range: %d\n",
hkey_num));

2
include/acpi/pdc_intel.h
View File

@ -14,6 +14,7 @@
#define ACPI_PDC_SMP_T_SWCOORD (0x0080)
#define ACPI_PDC_C_C1_FFH (0x0100)
#define ACPI_PDC_C_C2C3_FFH (0x0200)
#define ACPI_PDC_SMP_P_HWCOORD (0x0800)
#define ACPI_PDC_EST_CAPABILITY_SMP (ACPI_PDC_SMP_C1PT | \
ACPI_PDC_C_C1_HALT | \
@ -22,6 +23,7 @@
#define ACPI_PDC_EST_CAPABILITY_SWSMP (ACPI_PDC_SMP_C1PT | \
ACPI_PDC_C_C1_HALT | \
ACPI_PDC_SMP_P_SWCOORD | \
ACPI_PDC_SMP_P_HWCOORD | \
ACPI_PDC_P_FFH)
#define ACPI_PDC_C_CAPABILITY_SMP (ACPI_PDC_SMP_C2C3 | \

26
kernel/power/main.c
View File

@ -57,16 +57,6 @@ int pm_notifier_call_chain(unsigned long val)
#ifdef CONFIG_PM_DEBUG
int pm_test_level = TEST_NONE;
static int suspend_test(int level)
{
if (pm_test_level == level) {
printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
mdelay(5000);
return 1;
}
return 0;
}
static const char * const pm_tests[__TEST_AFTER_LAST] = {
[TEST_NONE] = "none",
[TEST_CORE] = "core",
@ -125,14 +115,24 @@ static ssize_t pm_test_store(struct kobject *kobj, struct kobj_attribute *attr,
}
power_attr(pm_test);
#else /* !CONFIG_PM_DEBUG */
static inline int suspend_test(int level) { return 0; }
#endif /* !CONFIG_PM_DEBUG */
#endif /* CONFIG_PM_DEBUG */
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SUSPEND
static int suspend_test(int level)
{
#ifdef CONFIG_PM_DEBUG
if (pm_test_level == level) {
printk(KERN_INFO "suspend debug: Waiting for 5 seconds.\n");
mdelay(5000);
return 1;
}
#endif /* !CONFIG_PM_DEBUG */
return 0;
}
#ifdef CONFIG_PM_TEST_SUSPEND
/*