documentation/devicetree: Fix typos
Correct spelling typos within Documentation/devicetree Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Masanari Iida
Grant Likely
parent
c0a05bf018
commit
f21ccfa070
|
|
@ -4,7 +4,7 @@ Required properties:
|
|||
- compatible: Should be "atmel,<chip>-aic"
|
||||
- interrupt-controller: Identifies the node as an interrupt controller.
|
||||
- interrupt-parent: For single AIC system, it is an empty property.
|
||||
- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
|
||||
- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
|
||||
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
|
||||
The second cell is used to specify flags:
|
||||
bits[3:0] trigger type and level flags:
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ Main node required properties:
|
|||
|
||||
Optional
|
||||
- interrupts : Interrupt source of the parent interrupt controller on
|
||||
secondary GICs, or VGIC maintainance interrupt on primary GIC (see
|
||||
secondary GICs, or VGIC maintenance interrupt on primary GIC (see
|
||||
below).
|
||||
|
||||
- cpu-offset : per-cpu offset within the distributor and cpu interface
|
||||
|
|
@ -74,7 +74,7 @@ Required properties:
|
|||
virtual interface control register base and size. The 2nd additional
|
||||
region is the GIC virtual cpu interface register base and size.
|
||||
|
||||
- interrupts : VGIC maintainance interrupt.
|
||||
- interrupts : VGIC maintenance interrupt.
|
||||
|
||||
Example:
|
||||
|
||||
|
|
|
|||
|
|
@ -39,16 +39,16 @@ Boards:
|
|||
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
|
||||
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
|
||||
|
||||
- OMAP4 SDP : Software Developement Board
|
||||
- OMAP4 SDP : Software Development Board
|
||||
compatible = "ti,omap4-sdp", "ti,omap4430"
|
||||
|
||||
- OMAP4 PandaBoard : Low cost community board
|
||||
compatible = "ti,omap4-panda", "ti,omap4430"
|
||||
|
||||
- OMAP3 EVM : Software Developement Board for OMAP35x, AM/DM37x
|
||||
- OMAP3 EVM : Software Development Board for OMAP35x, AM/DM37x
|
||||
compatible = "ti,omap3-evm", "ti,omap3"
|
||||
|
||||
- AM335X EVM : Software Developement Board for AM335x
|
||||
- AM335X EVM : Software Development Board for AM335x
|
||||
compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3"
|
||||
|
||||
- AM335X Bone : Low cost community board
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
* DMA Engine.
|
||||
|
||||
The Octeon DMA Engine transfers between the Boot Bus and main memory.
|
||||
The DMA Engine will be refered to by phandle by any device that is
|
||||
The DMA Engine will be referred to by phandle by any device that is
|
||||
connected to it.
|
||||
|
||||
Properties:
|
||||
|
|
|
|||
|
|
@ -11,11 +11,11 @@ Required Properties:
|
|||
|
||||
* compatible: should be
|
||||
- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
|
||||
specific extentions.
|
||||
specific extensions.
|
||||
- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
|
||||
specific extentions.
|
||||
specific extensions.
|
||||
- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
|
||||
specific extentions.
|
||||
specific extensions.
|
||||
|
||||
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
|
||||
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
|
||||
|
|
|
|||
|
|
@ -55,5 +55,5 @@ Example:
|
|||
};
|
||||
|
||||
Note: This example shows both SoC specific and board specific properties
|
||||
in a single device node. The properties can be actually be seperated
|
||||
in a single device node. The properties can be actually be separated
|
||||
into SoC specific node and board specific node.
|
||||
|
|
|
|||
|
|
@ -8,9 +8,9 @@ Properties:
|
|||
Definition: Must include "fsl,srio" for IP blocks with IP Block
|
||||
Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
|
||||
|
||||
Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
|
||||
Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major
|
||||
version in IP Block Revision Register and Y is Minor version. If this
|
||||
compatiable is provided it should be ordered before "fsl,srio".
|
||||
compatible is provided it should be ordered before "fsl,srio".
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
|
|
|
|||
|
|
@ -17,9 +17,9 @@ Optional properties:
|
|||
- ti,vsel1-gpio: Gpio for controlling VSEL1 line.
|
||||
If this property is missing, then assume that there is no GPIO
|
||||
for vsel1 control.
|
||||
- ti,vsel0-state-high: Inital state of vsel0 input is high.
|
||||
- ti,vsel0-state-high: Initial state of vsel0 input is high.
|
||||
If this property is missing, then assume the state as low (0).
|
||||
- ti,vsel1-state-high: Inital state of vsel1 input is high.
|
||||
- ti,vsel1-state-high: Initial state of vsel1 input is high.
|
||||
If this property is missing, then assume the state as low (0).
|
||||
|
||||
Any property defined as part of the core regulator binding, defined in
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ Required properties:
|
|||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
- interrupts: Two interrupt numbers to the cpu should be specified. First
|
||||
interrupt number is the rtc alarm interupt and second interrupt number
|
||||
interrupt number is the rtc alarm interrupt and second interrupt number
|
||||
is the rtc tick interrupt. The number of cells representing a interrupt
|
||||
depends on the parent interrupt controller.
|
||||
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
The Samsung's Watchdog controller is used for resuming system operation
|
||||
after a preset amount of time during which the WDT reset event has not
|
||||
occured.
|
||||
occurred.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "samsung,s3c2410-wdt"
|
||||
|
|
|
|||
Loading…
Reference in New Issue