sched: Add NEED_RESCHED to the preempt_count

In order to combine the preemption and need_resched test we need to
fold the need_resched information into the preempt_count value.

Since the NEED_RESCHED flag is set across CPUs this needs to be an
atomic operation, however we very much want to avoid making
preempt_count atomic, therefore we keep the existing TIF_NEED_RESCHED
infrastructure in place but at 3 sites test it and fold its value into
preempt_count; namely:

 - resched_task() when setting TIF_NEED_RESCHED on the current task
 - scheduler_ipi() when resched_task() sets TIF_NEED_RESCHED on a
                   remote task it follows it up with a reschedule IPI
                   and we can modify the cpu local preempt_count from
                   there.
 - cpu_idle_loop() for when resched_task() found tsk_is_polling().

We use an inverted bitmask to indicate need_resched so that a 0 means
both need_resched and !atomic.

Also remove the barrier() in preempt_enable() between
preempt_enable_no_resched() and preempt_check_resched() to avoid
having to reload the preemption value and allow the compiler to use
the flags of the previuos decrement. I couldn't come up with any sane
reason for this barrier() to be there as preempt_enable_no_resched()
already has a barrier() before doing the decrement.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-7a7m5qqbn5pmwnd4wko9u6da@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Peter Zijlstra 2013-08-14 14:55:31 +02:00 committed by Ingo Molnar
parent 4a2b4b2227
commit f27dde8dee
4 changed files with 69 additions and 12 deletions

View File

@ -10,9 +10,19 @@
#include <linux/linkage.h>
#include <linux/list.h>
/*
* We use the MSB mostly because its available; see <linux/preempt_mask.h> for
* the other bits -- can't include that header due to inclusion hell.
*/
#define PREEMPT_NEED_RESCHED 0x80000000
/*
* We mask the PREEMPT_NEED_RESCHED bit so as not to confuse all current users
* that think a non-zero value indicates we cannot preempt.
*/
static __always_inline int preempt_count(void)
{
return current_thread_info()->preempt_count;
return current_thread_info()->preempt_count & ~PREEMPT_NEED_RESCHED;
}
static __always_inline int *preempt_count_ptr(void)
@ -20,11 +30,40 @@ static __always_inline int *preempt_count_ptr(void)
return &current_thread_info()->preempt_count;
}
/*
* We now loose PREEMPT_NEED_RESCHED and cause an extra reschedule; however the
* alternative is loosing a reschedule. Better schedule too often -- also this
* should be a very rare operation.
*/
static __always_inline void preempt_count_set(int pc)
{
*preempt_count_ptr() = pc;
}
/*
* We fold the NEED_RESCHED bit into the preempt count such that
* preempt_enable() can decrement and test for needing to reschedule with a
* single instruction.
*
* We invert the actual bit, so that when the decrement hits 0 we know we both
* need to resched (the bit is cleared) and can resched (no preempt count).
*/
static __always_inline void set_preempt_need_resched(void)
{
*preempt_count_ptr() &= ~PREEMPT_NEED_RESCHED;
}
static __always_inline void clear_preempt_need_resched(void)
{
*preempt_count_ptr() |= PREEMPT_NEED_RESCHED;
}
static __always_inline bool test_preempt_need_resched(void)
{
return !(*preempt_count_ptr() & PREEMPT_NEED_RESCHED);
}
#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER)
extern void add_preempt_count(int val);
extern void sub_preempt_count(int val);
@ -42,7 +81,7 @@ asmlinkage void preempt_schedule(void);
#define preempt_check_resched() \
do { \
if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
if (unlikely(!*preempt_count_ptr())) \
preempt_schedule(); \
} while (0)
@ -52,7 +91,7 @@ void preempt_schedule_context(void);
#define preempt_check_resched_context() \
do { \
if (unlikely(test_thread_flag(TIF_NEED_RESCHED))) \
if (unlikely(!*preempt_count_ptr())) \
preempt_schedule_context(); \
} while (0)
#else
@ -88,7 +127,6 @@ do { \
#define preempt_enable() \
do { \
preempt_enable_no_resched(); \
barrier(); \
preempt_check_resched(); \
} while (0)
@ -116,7 +154,6 @@ do { \
#define preempt_enable_notrace() \
do { \
preempt_enable_no_resched_notrace(); \
barrier(); \
preempt_check_resched_context(); \
} while (0)

View File

@ -22,6 +22,7 @@ struct sched_param {
#include <linux/errno.h>
#include <linux/nodemask.h>
#include <linux/mm_types.h>
#include <linux/preempt.h>
#include <asm/page.h>
#include <asm/ptrace.h>
@ -434,7 +435,9 @@ struct task_cputime {
* We include PREEMPT_ACTIVE to avoid cond_resched() from working
* before the scheduler is active -- see should_resched().
*/
#define INIT_PREEMPT_COUNT (1 + PREEMPT_ACTIVE)
#define INIT_PREEMPT_COUNT (1 + PREEMPT_ACTIVE + PREEMPT_NEED_RESCHED)
#define PREEMPT_ENABLED (PREEMPT_NEED_RESCHED)
#define PREEMPT_DISABLED (1 + PREEMPT_NEED_RESCHED)
/**
* struct thread_group_cputimer - thread group interval timer counts
@ -2408,7 +2411,7 @@ static inline int signal_pending_state(long state, struct task_struct *p)
static inline int need_resched(void)
{
return unlikely(test_thread_flag(TIF_NEED_RESCHED));
return unlikely(test_preempt_need_resched());
}
/*

View File

@ -105,6 +105,13 @@ static void cpu_idle_loop(void)
__current_set_polling();
}
arch_cpu_idle_exit();
/*
* We need to test and propagate the TIF_NEED_RESCHED
* bit here because we might not have send the
* reschedule IPI to idle tasks.
*/
if (tif_need_resched())
set_preempt_need_resched();
}
tick_nohz_idle_exit();
schedule_preempt_disabled();

View File

@ -525,8 +525,10 @@ void resched_task(struct task_struct *p)
set_tsk_need_resched(p);
cpu = task_cpu(p);
if (cpu == smp_processor_id())
if (cpu == smp_processor_id()) {
set_preempt_need_resched();
return;
}
/* NEED_RESCHED must be visible before we test polling */
smp_mb();
@ -1391,6 +1393,14 @@ static void sched_ttwu_pending(void)
void scheduler_ipi(void)
{
/*
* Fold TIF_NEED_RESCHED into the preempt_count; anybody setting
* TIF_NEED_RESCHED remotely (for the first time) will also send
* this IPI.
*/
if (tif_need_resched())
set_preempt_need_resched();
if (llist_empty(&this_rq()->wake_list)
&& !tick_nohz_full_cpu(smp_processor_id())
&& !got_nohz_idle_kick())
@ -1714,7 +1724,7 @@ void sched_fork(struct task_struct *p)
#endif
#ifdef CONFIG_PREEMPT_COUNT
/* Want to start with kernel preemption disabled. */
task_thread_info(p)->preempt_count = 1;
task_thread_info(p)->preempt_count = PREEMPT_DISABLED;
#endif
#ifdef CONFIG_SMP
plist_node_init(&p->pushable_tasks, MAX_PRIO);
@ -2425,6 +2435,7 @@ need_resched:
put_prev_task(rq, prev);
next = pick_next_task(rq);
clear_tsk_need_resched(prev);
clear_preempt_need_resched();
rq->skip_clock_update = 0;
if (likely(prev != next)) {
@ -2536,11 +2547,10 @@ EXPORT_SYMBOL(preempt_schedule);
*/
asmlinkage void __sched preempt_schedule_irq(void)
{
struct thread_info *ti = current_thread_info();
enum ctx_state prev_state;
/* Catch callers which need to be fixed */
BUG_ON(ti->preempt_count || !irqs_disabled());
BUG_ON(preempt_count() || !irqs_disabled());
prev_state = exception_enter();
@ -4207,7 +4217,7 @@ void init_idle(struct task_struct *idle, int cpu)
raw_spin_unlock_irqrestore(&rq->lock, flags);
/* Set the preempt count _outside_ the spinlocks! */
task_thread_info(idle)->preempt_count = 0;
task_thread_info(idle)->preempt_count = PREEMPT_ENABLED;
/*
* The idle tasks have their own, simple scheduling class: