ASoC: Updates for v4.19

A fairly big update, including quite a bit of core activity this time
 around (which is good to see) along with a fairly large set of new
 drivers.
 
  - A new snd_pcm_stop_xrun() helper which is now used in several
    drivers.
  - Support for providing name prefixes to generic component nodes.
  - Quite a few fixes for DPCM as it gains a bit wider use and more
    robust testing.
  - Generalization of the DIO2125 support to a simple amplifier driver.
  - Accessory detection support for the audio graph card.
  - DT support for PXA AC'97 devices.
  - Quirks for a number of new x86 systems.
  - Support for AM Logic Meson, Everest ES7154, Intel systems with
    RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltxVZsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0CtwB/0U+IUWLlojWD6RDfueycvc9TiZW0t4
 gBT3OD8f4oif0MuMy6oE2ag8JPNU8n5MnO14U366GDaEyZPj79W7f50Q8Nnyht/n
 py6fQfyo7Ec2hFJstDI42KvDymTbAer6hnAUJarr/FdZHdGeOfYV+s7aHp5aEQAS
 KACnX8qWo87VePouNBorqWXWueAJTb6zpWy7YQ1KGb/pJIAeue2Y9pLRGXQos1BS
 E1AP+ge2BMnz7BeiCgw/39hN6X545nJ1fcZKuIu8Gqy9ahqEDHgmBWPAehtGnfVj
 D8JPplTaBFtAsJwi18b7ApWtcytpizPPN/l3NTA4fTRJQe9kxfDmnE7b
 =fvKX
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.19

A fairly big update, including quite a bit of core activity this time
around (which is good to see) along with a fairly large set of new
drivers.

 - A new snd_pcm_stop_xrun() helper which is now used in several
   drivers.
 - Support for providing name prefixes to generic component nodes.
 - Quite a few fixes for DPCM as it gains a bit wider use and more
   robust testing.
 - Generalization of the DIO2125 support to a simple amplifier driver.
 - Accessory detection support for the audio graph card.
 - DT support for PXA AC'97 devices.
 - Quirks for a number of new x86 systems.
 - Support for AM Logic Meson, Everest ES7154, Intel systems with
   RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
This commit is contained in:
Takashi Iwai 2018-08-13 12:12:31 +02:00
commit f5b6c1fcb4
984 changed files with 21078 additions and 6644 deletions

View File

@ -15,6 +15,8 @@ Constructor parameters:
size)
5. the number of optional parameters (the parameters with an argument
count as two)
start_sector n (default: 0)
offset from the start of cache device in 512-byte sectors
high_watermark n (default: 50)
start writeback when the number of used blocks reach this
watermark

View File

@ -66,7 +66,7 @@ Required root node properties:
- "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale
Octa board.
- "insignal,origen" - for Exynos4210-based Insignal Origen board.
- "insignal,origen4412 - for Exynos4412-based Insignal Origen board.
- "insignal,origen4412" - for Exynos4412-based Insignal Origen board.
Optional nodes:

View File

@ -36,7 +36,7 @@ Optional nodes:
- port/ports: to describe a connection to an external encoder. The
binding follows Documentation/devicetree/bindings/graph.txt and
suppors a single port with a single endpoint.
supports a single port with a single endpoint.
- See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and
Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting

View File

@ -1,7 +1,7 @@
Nintendo Wii (Hollywood) GPIO controller
Required properties:
- compatible: "nintendo,hollywood-gpio
- compatible: "nintendo,hollywood-gpio"
- reg: Physical base address and length of the controller's registers.
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be <2>. The first cell is the pin number and the

View File

@ -32,7 +32,7 @@ i2c@00000000 {
reg = <0x6c>;
interrupt-parent = <&gpx1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
vdd-supply = <&ldo15_reg>";
vdd-supply = <&ldo15_reg>;
vid-supply = <&ldo18_reg>;
reset-gpios = <&gpx1 5 0>;
touchscreen-size-x = <1080>;

View File

@ -15,7 +15,7 @@ Required properties:
include "nvidia,tegra30-ictlr".
- reg : Specifies base physical address and size of the registers.
Each controller must be described separately (Tegra20 has 4 of them,
whereas Tegra30 and later have 5"
whereas Tegra30 and later have 5).
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.

View File

@ -12,7 +12,7 @@ Required properties:
specifier, shall be 2
- interrupts: interrupts references to primary interrupt controller
(only needed for exti controller with multiple exti under
same parent interrupt: st,stm32-exti and st,stm32h7-exti")
same parent interrupt: st,stm32-exti and st,stm32h7-exti)
Example:

View File

@ -152,7 +152,7 @@ Required properties:
- compatible : should contain one of:
"brcm,bcm7425-timers"
"brcm,bcm7429-timers"
"brcm,bcm7435-timers and
"brcm,bcm7435-timers" and
"brcm,brcmstb-timers"
- reg : the timers register range
- interrupts : the interrupt line for this timer block

View File

@ -238,7 +238,7 @@ PROPERTIES
Must include one of the following:
- "fsl,fman-dtsec" for dTSEC MAC
- "fsl,fman-xgec" for XGEC MAC
- "fsl,fman-memac for mEMAC MAC
- "fsl,fman-memac" for mEMAC MAC
- cell-index
Usage: required

View File

@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a
node with the label "power".
In the second example the consumer device are partitioned across two PM domains,
the first with index 0 and the second with index 1, of a power controller that
is represented by a node with the label "power.
is represented by a node with the label "power".
Optional properties:
- required-opps: This contains phandle to an OPP node in another device's OPP

View File

@ -16,7 +16,7 @@ Required properties:
Optional properties:
- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled then this property should be there.
- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
If DCDCs are externally controlled and if it is from GPIO then GPIO
number should be provided. If it is externally controlled and no GPIO
entry then driver will just configure this rails as external control

View File

@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be st,stih407-softreset";
- compatible: Should be "st,stih407-softreset";
- #reset-cells: 1, see below
example:

View File

@ -39,7 +39,7 @@ Required properties:
Optional property:
- clock-frequency: Desired I2C bus clock frequency in Hz.
When missing default to 400000Hz.
When missing default to 100000Hz.
Child nodes should conform to I2C bus binding as described in i2c.txt.

View File

@ -0,0 +1,23 @@
* Amlogic Audio FIFO controllers
Required properties:
- compatible: 'amlogic,axg-toddr' or
'amlogic,axg-frddr'
- reg: physical base address of the controller and length of memory
mapped region.
- interrupts: interrupt specifier for the fifo.
- clocks: phandle to the fifo peripheral clock provided by the audio
clock controller.
- resets: phandle to memory ARB line provided by the arb reset controller.
- #sound-dai-cells: must be 0.
Example of FRDDR A on the A113 SoC:
frddr_a: audio-controller@1c0 {
compatible = "amlogic,axg-frddr";
reg = <0x0 0x1c0 0x0 0x1c>;
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>;
};

View File

@ -0,0 +1,124 @@
Amlogic AXG sound card:
Required properties:
- compatible: "amlogic,axg-sound-card"
- model : User specified audio sound card name, one string
Optional properties:
- audio-aux-devs : List of phandles pointing to auxiliary devices
- audio-widgets : Please refer to widgets.txt.
- audio-routing : A list of the connections between audio components.
Subnodes:
- dai-link: Container for dai-link level properties and the CODEC
sub-nodes. There should be at least one (and probably more)
subnode of this type.
Required dai-link properties:
- sound-dai: phandle and port of the CPU DAI.
Required TDM Backend dai-link properties:
- dai-format : CPU/CODEC common audio format
Optional TDM Backend dai-link properties:
- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
When omitted, mask is assumed to have to no
slots. A valid must have at one slot, so at
least one these mask should be provided with
an enabled slot.
- dai-tdm-slot-num : Please refer to tdm-slot.txt.
If omitted, slot number is set to accommodate the largest
mask provided.
- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
- mclk-fs : Multiplication factor between stream rate and mclk
Backend dai-link subnodes:
- codec: dai-link representing backend links should have at least one subnode.
One subnode for each codec of the dai-link.
dai-link representing frontend links have no codec, therefore have no
subnodes
Required codec subnodes properties:
- sound-dai: phandle and port of the CODEC DAI.
Optional codec subnodes properties:
- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
Example:
sound {
compatible = "amlogic,axg-sound-card";
model = "AXG-S420";
audio-aux-devs = <&tdmin_a>, <&tdmout_c>;
audio-widgets = "Line", "Lineout",
"Line", "Linein",
"Speaker", "Speaker1 Left",
"Speaker", "Speaker1 Right";
"Speaker", "Speaker2 Left",
"Speaker", "Speaker2 Right";
audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
"SPDIFOUT IN 0", "FRDDR_A OUT 3",
"TDM_C Playback", "TDMOUT_C OUT",
"TDMIN_A IN 2", "TDM_C Capture",
"TDMIN_A IN 5", "TDM_C Loopback",
"TODDR_A IN 0", "TDMIN_A OUT",
"Lineout", "Lineout AOUTL",
"Lineout", "Lineout AOUTR",
"Speaker1 Left", "SPK1 OUT_A",
"Speaker2 Left", "SPK2 OUT_A",
"Speaker1 Right", "SPK1 OUT_B",
"Speaker2 Right", "SPK2 OUT_B",
"Linein AINL", "Linein",
"Linein AINR", "Linein";
dai-link@0 {
sound-dai = <&frddr_a>;
};
dai-link@1 {
sound-dai = <&toddr_a>;
};
dai-link@2 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-tx-mask-3 = <1 1>;
dai-tdm-slot-rx-mask-1 = <1 1>;
mclk-fs = <256>;
codec@0 {
sound-dai = <&lineout>;
};
codec@1 {
sound-dai = <&speaker_amp1>;
};
codec@2 {
sound-dai = <&speaker_amp2>;
};
codec@3 {
sound-dai = <&linein>;
};
};
dai-link@3 {
sound-dai = <&spdifout>;
codec {
sound-dai = <&spdif_dit>;
};
};
};

View File

@ -0,0 +1,20 @@
* Amlogic Audio SPDIF Output
Required properties:
- compatible: 'amlogic,axg-spdifout'
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "pclk" : peripheral clock.
* "mclk" : master clock
- #sound-dai-cells: must be 0.
Example on the A113 SoC:
spdifout: audio-controller@480 {
compatible = "amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
};

View File

@ -0,0 +1,28 @@
* Amlogic Audio TDM formatters
Required properties:
- compatible: 'amlogic,axg-tdmin' or
'amlogic,axg-tdmout'
- reg: physical base address of the controller and length of memory
mapped region.
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "pclk" : peripheral clock.
* "sclk" : bit clock.
* "sclk_sel" : bit clock input multiplexer.
* "lrclk" : sample clock
* "lrclk_sel": sample clock input multiplexer
Example of TDMOUT_A on the A113 SoC:
tdmout_a: audio-controller@500 {
compatible = "amlogic,axg-tdmout";
reg = <0x0 0x500 0x0 0x40>;
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
};

View File

@ -0,0 +1,22 @@
* Amlogic Audio TDM Interfaces
Required properties:
- compatible: 'amlogic,axg-tdm-iface'
- clocks: list of clock phandle, one for each entry clock-names.
- clock-names: should contain the following:
* "sclk" : bit clock.
* "lrclk": sample clock
* "mclk" : master clock
-> optional if the interface is in clock slave mode.
- #sound-dai-cells: must be 0.
Example of TDM_A on the A113 SoC:
tdmif_a: audio-controller@0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
<&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
};

View File

@ -15,7 +15,6 @@ Required properties:
- clock-names: Should be one of each entry matching the clocks phandles list:
- "pclk" (peripheral clock) Required.
- "gclk" (generated clock) Optional (1).
- "aclk" (Audio PLL clock) Optional (1).
- "muxclk" (I2S mux clock) Optional (1).
Optional properties:
@ -23,9 +22,9 @@ Optional properties:
- princtrl-names: Should contain only one value - "default".
(1) : Only the peripheral clock is required. The generated clock, the Audio
PLL clock adn the I2S mux clock are optional and should only be set
together, when Master Mode is required.
(1) : Only the peripheral clock is required. The generated clock and the I2S
mux clock are optional and should only be set together, when Master Mode
is required.
Example:
@ -40,8 +39,8 @@ Example:
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
AT91_XDMAC_DT_PERID(32))>;
dma-names = "tx", "rx";
clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
clock-names = "pclk", "gclk", "aclk", "muxclk";
clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
clock-names = "pclk", "gclk", "muxclk";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2s0_default>;
};

View File

@ -18,6 +18,8 @@ Below are same as Simple-Card.
- bitclock-inversion
- frame-inversion
- mclk-fs
- hp-det-gpio
- mic-det-gpio
- dai-tdm-slot-num
- dai-tdm-slot-width
- clocks / system-clock-frequency

View File

@ -1,12 +0,0 @@
DIO2125 Audio Driver
Required properties:
- compatible : "dioo,dio2125"
- enable-gpios : the gpio connected to the enable pin of the dio2125
Example:
amp: analog-amplifier {
compatible = "dioo,dio2125";
enable-gpios = <&gpio GPIOH_3 0>;
};

View File

@ -1,10 +1,15 @@
ES7134 i2s DA converter
Required properties:
- compatible : "everest,es7134" or "everest,es7144"
- compatible : "everest,es7134" or
"everest,es7144" or
"everest,es7154"
- VDD-supply : regulator phandle for the VDD supply
- PVDD-supply: regulator phandle for the PVDD supply for the es7154
Example:
i2s_codec: external-codec {
compatible = "everest,es7134";
VDD-supply = <&vcc_5v>;
};

View File

@ -0,0 +1,28 @@
ES7241 i2s AD converter
Required properties:
- compatible : "everest,es7241"
- VDDP-supply: regulator phandle for the VDDA supply
- VDDA-supply: regulator phandle for the VDDP supply
- VDDD-supply: regulator phandle for the VDDD supply
Optional properties:
- reset-gpios: gpio connected to the reset pin
- m0-gpios : gpio connected to the m0 pin
- m1-gpios : gpio connected to the m1 pin
- everest,sdout-pull-down:
Format used by the serial interface is controlled by pulling
the sdout. If the sdout is pulled down, leftj format is used.
If this property is not provided, sdout is assumed to pulled
up and i2s format is used
Example:
linein: audio-codec@2 {
#sound-dai-cells = <0>;
compatible = "everest,es7241";
VDDA-supply = <&vcc_3v3>;
VDDP-supply = <&vcc_3v3>;
VDDD-supply = <&vcc_3v3>;
reset-gpios = <&gpio GPIOH_42>;
};

View File

@ -0,0 +1,27 @@
Marvell PXA2xx audio complex
This descriptions matches the AC97 controller found in pxa2xx and pxa3xx series.
Required properties:
- compatible: should be one of the following:
"marvell,pxa250-ac97"
"marvell,pxa270-ac97"
"marvell,pxa300-ac97"
- reg: device MMIO address space
- interrupts: single interrupt generated by AC97 IP
- clocks: input clock of the AC97 IP, refer to clock-bindings.txt
Optional properties:
- pinctrl-names, pinctrl-0: refer to pinctrl-bindings.txt
- reset-gpios: gpio used for AC97 reset, refer to gpio.txt
Example:
ac97: sound@40500000 {
compatible = "marvell,pxa250-ac97";
reg = < 0x40500000 0x1000 >;
interrupts = <14>;
reset-gpios = <&gpio 113 GPIO_ACTIVE_HIGH>;
#sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = < &pmux_ac97_default >;
};

View File

@ -5,6 +5,14 @@ Required properties:
compatible Must be "mrvl,pxa-ssp-dai"
port A phandle reference to a PXA ssp upstream device
Optional properties:
clock-names
clocks Through "clock-names" and "clocks", external clocks
can be configured. If a clock names "extclk" exists,
it will be set to the mclk rate of the audio stream
and be used as clock provider of the DAI.
Example:
/* upstream device */

View File

@ -1,15 +0,0 @@
DT bindings for ARM PXA2xx PCM platform driver
This is just a dummy driver that registers the PXA ASoC platform driver.
It does not have any resources assigned.
Required properties:
- compatible 'mrvl,pxa-pcm-audio'
Example:
pxa_pcm_audio: snd_soc_pxa_audio {
compatible = "mrvl,pxa-pcm-audio";
};

View File

@ -0,0 +1,24 @@
Name prefix:
Card implementing the routing property define the connection between
audio components as list of string pair. Component using the same
sink/source names may use the name prefix property to prepend the
name of their sinks/sources with the provided string.
Optional name prefix property:
- sound-name-prefix : string using as prefix for the sink/source names of
the component.
Example: Two instances of the same component.
amp0: analog-amplifier@0 {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio GPIOH_3 0>;
sound-name-prefix = "FRONT";
};
amp1: analog-amplifier@1 {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio GPIOH_4 0>;
sound-name-prefix = "BACK";
};

View File

@ -30,7 +30,7 @@ Required properties:
Board connectors:
* Headset Mic
* Secondary Mic",
* Secondary Mic
* DMIC
* Ext Spk

View File

@ -7,7 +7,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
Value type: <stringlist>
Definition: must be "qcom,apq8096-sndcard"
- qcom,audio-routing:
- audio-routing:
Usage: Optional
Value type: <stringlist>
Definition: A list of the connections between audio components.
@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
"Digital Mic3"
Audio pins and MicBias on WCD9335 Codec:
"MIC_BIAS1
"MIC_BIAS1"
"MIC_BIAS2"
"MIC_BIAS3"
"MIC_BIAS4"
@ -49,6 +49,12 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio.
"DMIC1"
"DMIC2"
"DMIC3"
- model:
Usage: required
Value type: <stringlist>
Definition: The user-visible name of this sound card.
= dailinks
Each subnode of sndcard represents either a dailink, and subnodes of each
dailinks would be cpu/codec/platform dais.
@ -79,11 +85,16 @@ dailinks would be cpu/codec/platform dais.
Value type: <phandle with arguments>
Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
Obsolete:
qcom,model: String for soundcard name (Use model instead)
qcom,audio-routing: A list of the connections between audio components.
(Use audio-routing instead)
Example:
audio {
compatible = "qcom,apq8096-sndcard";
qcom,model = "DB820c";
model = "DB820c";
mm1-dai-link {
link-name = "MultiMedia1";

View File

@ -18,6 +18,11 @@ used by the apr service device.
= ADM routing
"routing" subnode of the ADM node represents adm routing specific configuration
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,q6adm-routing".
- #sound-dai-cells
Usage: required
Value type: <u32>
@ -28,6 +33,7 @@ q6adm@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
compatible = "qcom,q6adm-routing";
#sound-dai-cells = <0>;
};
};

View File

@ -17,6 +17,11 @@ used by all apr services. Must contain the following properties.
subnode of "dais" representing board specific dai setup.
"dais" node should have following properties followed by dai children.
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,q6afe-dais"
- #sound-dai-cells
Usage: required
Value type: <u32>
@ -100,6 +105,7 @@ q6afe@4 {
reg = <APR_SVC_AFE>;
dais {
compatible = "qcom,q6afe-dais";
#sound-dai-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;

View File

@ -17,6 +17,11 @@ used by the apr service device.
= ASM DAIs (Digial Audio Interface)
"dais" subnode of the ASM node represents dai specific configuration
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,q6asm-dais".
- #sound-dai-cells
Usage: required
Value type: <u32>
@ -28,6 +33,7 @@ q6asm@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
compatible = "qcom,q6asm-dais";
#sound-dai-cells = <1>;
};
};

View File

@ -0,0 +1,80 @@
* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
This binding describes the SDM845 sound card, which uses qdsp for audio.
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,sdm845-sndcard"
- audio-routing:
Usage: Optional
Value type: <stringlist>
Definition: A list of the connections between audio components.
Each entry is a pair of strings, the first being the
connection's sink, the second being the connection's
source. Valid names could be power supplies, MicBias
of codec and the jacks on the board.
- model:
Usage: required
Value type: <stringlist>
Definition: The user-visible name of this sound card.
= dailinks
Each subnode of sndcard represents either a dailink, and subnodes of each
dailinks would be cpu/codec/platform dais.
- link-name:
Usage: required
Value type: <string>
Definition: User friendly name for dai link
= CPU, PLATFORM, CODEC dais subnodes
- cpu:
Usage: required
Value type: <subnode>
Definition: cpu dai sub-node
- codec:
Usage: required
Value type: <subnode>
Definition: codec dai sub-node
- platform:
Usage: Optional
Value type: <subnode>
Definition: platform dai sub-node
- sound-dai:
Usage: required
Value type: <phandle>
Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
Example:
audio {
compatible = "qcom,sdm845-sndcard";
model = "sdm845-snd-card";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
pri-mi2s-dai-link {
link-name = "PRI MI2S Playback";
cpu {
sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
};
platform {
sound-dai = <&q6routing>;
};
};
};

View File

@ -0,0 +1,123 @@
QCOM WCD9335 Codec
Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
Soundwire controller, interrupt mux. It supports both I2S/I2C and
SLIMbus audio interfaces.
Required properties with SLIMbus Interface:
- compatible:
Usage: required
Value type: <stringlist>
Definition: For SLIMbus interface it should be "slimMID,PID",
textual representation of Manufacturer ID, Product Code,
shall be in lower case hexadecimal with leading zeroes
suppressed. Refer to slimbus/bus.txt for details.
Should be:
"slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
- reg
Usage: required
Value type: <u32 u32>
Definition: Should be ('Device index', 'Instance ID')
- interrupts
Usage: required
Value type: <prop-encoded-array>
Definition: Interrupts via WCD INTR1 and INTR2 pins
- interrupt-names:
Usage: required
Value type: <String array>
Definition: Interrupt names of WCD INTR1 and INTR2
Should be: "intr1", "intr2"
- reset-gpio:
Usage: required
Value type: <String Array>
Definition: Reset gpio line
- qcom,ifd:
Usage: required
Value type: <phandle>
Definition: SLIM interface device
- clocks:
Usage: required
Value type: <prop-encoded-array>
Definition: See clock-bindings.txt section "consumers". List of
three clock specifiers for mclk, mclk2 and slimbus clock.
- clock-names:
Usage: required
Value type: <string>
Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
- vdd-buck-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the 1.8V buck supply
- vdd-buck-sido-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the 1.8V SIDO buck supply
- vdd-rx-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the 1.8V rx supply
- vdd-tx-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the 1.8V tx supply
- vdd-vbat-supply:
Usage: Optional
Value type: <phandle>
Definition: Should contain a reference to the vbat supply
- vdd-micbias-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the micbias supply
- vdd-io-supply:
Usage: required
Value type: <phandle>
Definition: Should contain a reference to the 1.8V io supply
- interrupt-controller:
Usage: required
Definition: Indicating that this is a interrupt controller
- #interrupt-cells:
Usage: required
Value type: <int>
Definition: should be 1
#sound-dai-cells
Usage: required
Value type: <u32>
Definition: Must be 1
codec@1{
compatible = "slim217,1a0";
reg = <1 0>;
interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "intr2"
reset-gpio = <&msmgpio 64 0>;
qcom,ifd = <&wc9335_ifd>;
clock-names = "mclk", "native";
clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
<&rpmcc RPM_SMD_BB_CLK1>;
vdd-buck-supply = <&pm8994_s4>;
vdd-rx-supply = <&pm8994_s4>;
vdd-buck-sido-supply = <&pm8994_s4>;
vdd-tx-supply = <&pm8994_s4>;
vdd-io-supply = <&pm8994_s4>;
#sound-dai-cells = <1>;
}

View File

@ -352,6 +352,7 @@ Required properties:
- "renesas,rcar_sound-r8a7794" (R-Car E2)
- "renesas,rcar_sound-r8a7795" (R-Car H3)
- "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- reg : Should contain the register physical address.
required register is
SRU/ADG/SSI if generation1

View File

@ -7,6 +7,7 @@ Required properties:
- compatible: should be one of the following:
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
- "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228

View File

@ -0,0 +1,50 @@
RT5682 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "realtek,rt5682" or "realtek,rt5682i"
- reg : The I2C address of the device.
Optional properties:
- interrupts : The CODEC's interrupt output.
- realtek,dmic1-data-pin
0: dmic1 is not used
1: using GPIO2 pin as dmic1 data pin
2: using GPIO5 pin as dmic1 data pin
- realtek,dmic1-clk-pin
0: using GPIO1 pin as dmic1 clock pin
1: using GPIO3 pin as dmic1 clock pin
- realtek,jd-src
0: No JD is used
1: using JD1 as JD source
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
Pins on the device (for linking into audio routes) for RT5682:
* DMIC L1
* DMIC R1
* IN1P
* HPOL
* HPOR
Example:
rt5682 {
compatible = "realtek,rt5682i";
reg = <0x1a>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
realtek,ldo1-en-gpios =
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
realtek,dmic1-data-pin = <1>;
realtek,dmic1-clk-pin = <1>;
realtek,jd-src = <1>;
};

View File

@ -17,7 +17,7 @@ Optional properties:
- VDDD-supply : the regulator provider of VDDD
- micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
- micbias-resistor-k-ohms : the bias resistor to be used in kOhms
The resistor can take values of 2k, 4k or 8k.
If set to 0 it will be off.
If this node is not mentioned or if the value is unknown, then

View File

@ -0,0 +1,12 @@
Simple Amplifier Audio Driver
Required properties:
- compatible : "dioo,dio2125" or "simple-audio-amplifier"
- enable-gpios : the gpio connected to the enable pin of the simple amplifier
Example:
amp: analog-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio GPIOH_3 0>;
};

View File

@ -7,6 +7,7 @@ powerdown (optional).
Required properties:
- compatible: should be one of the following:
- "ti,tas5707"
- "ti,tas5711",
- "ti,tas5717",
- "ti,tas5719",

View File

@ -16,7 +16,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY
Example device nodes:

View File

@ -15,7 +15,7 @@ Optional properties:
Examples:
onewire@0 {
onewire {
compatible = "w1-gpio";
gpios = <&gpio 126 0>, <&gpio 105 0>;
};

View File

@ -1490,7 +1490,7 @@ To remove an ARP target:
To configure the interval between learning packet transmits:
# echo 12 > /sys/class/net/bond0/bonding/lp_interval
NOTE: the lp_inteval is the number of seconds between instances where
NOTE: the lp_interval is the number of seconds between instances where
the bonding driver sends learning packets to each slaves peer switch. The
default interval is 1 second.

View File

@ -1,5 +1,6 @@
.. include:: <isonum.txt>
=========================================================
DPAA2 (Data Path Acceleration Architecture Gen2) Overview
=========================================================

View File

@ -47,41 +47,45 @@ Driver Configuration Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
Rx Descriptors:
Number of receive descriptors. A receive descriptor is a data
structure that describes a receive buffer and its attributes to the network
controller. The data in the descriptor is used by the controller to write
data from the controller to host memory. In the 3.x.x driver the valid range
for this parameter is 64-256. The default value is 256. This parameter can be
changed using the command::
ethtool -G eth? rx n
ethtool -G eth? rx n
Where n is the number of desired Rx descriptors.
Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
Tx Descriptors:
Number of transmit descriptors. A transmit descriptor is a data
structure that describes a transmit buffer and its attributes to the network
controller. The data in the descriptor is used by the controller to read
data from the host memory to the controller. In the 3.x.x driver the valid
range for this parameter is 64-256. The default value is 128. This parameter
can be changed using the command::
ethtool -G eth? tx n
ethtool -G eth? tx n
Where n is the number of desired Tx descriptors.
Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
Speed/Duplex:
The driver auto-negotiates the link speed and duplex settings by
default. The ethtool utility can be used as follows to force speed/duplex.::
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
ethtool -s eth? autoneg off speed {10|100} duplex {full|half}
NOTE: setting the speed/duplex to incorrect values will cause the link to
fail.
Event Log Message Level: The driver uses the message level flag to log events
Event Log Message Level:
The driver uses the message level flag to log events
to syslog. The message level can be set at driver load time. It can also be
set using the command::
ethtool -s eth? msglvl n
ethtool -s eth? msglvl n
Additional Configurations
@ -92,7 +96,7 @@ Configuring the Driver on Different Distributions
Configuring a network driver to load properly when the system is started
is distribution dependent. Typically, the configuration process involves
adding an alias line to /etc/modprobe.d/*.conf as well as editing other
adding an alias line to `/etc/modprobe.d/*.conf` as well as editing other
system startup scripts and/or configuration files. Many popular Linux
distributions ship with tools to make these changes for you. To learn
the proper way to configure a network device for your system, refer to
@ -160,7 +164,10 @@ This results in unbalanced receive traffic.
If you have multiple interfaces in a server, either turn on ARP
filtering by
(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(1) entering::
echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
(this only works if your kernel's version is higher than 2.4.5), or
(2) installing the interfaces in separate broadcast domains (either

View File

@ -34,7 +34,8 @@ Command Line Parameters
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
NOTES: For more information about the AutoNeg, Duplex, and Speed
NOTES:
For more information about the AutoNeg, Duplex, and Speed
parameters, see the "Speed and Duplex Configuration" section in
this document.
@ -45,22 +46,27 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed
AutoNeg
-------
(Supported only on adapters with copper connections)
Valid Range: 0x01-0x0F, 0x20-0x2F
Default Value: 0x2F
:Valid Range: 0x01-0x0F, 0x20-0x2F
:Default Value: 0x2F
This parameter is a bit-mask that specifies the speed and duplex settings
advertised by the adapter. When this parameter is used, the Speed and
Duplex parameters must not be specified.
NOTE: Refer to the Speed and Duplex section of this readme for more
NOTE:
Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
Duplex
------
(Supported only on adapters with copper connections)
Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
Default Value: 0
:Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
:Default Value: 0
This defines the direction in which data is allowed to flow. Can be
either one or two-directional. If both Duplex and the link partner are
@ -70,18 +76,22 @@ duplex.
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
Default Value: Reads flow control settings from the EEPROM
:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
:Default Value: Reads flow control settings from the EEPROM
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
Default Value: 3
:Valid Range:
0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
4=simplified balancing)
:Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
will generate for incoming packets. It does this by writing a value to the
@ -135,13 +145,15 @@ Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
NOTE:
InterruptThrottleRate takes precedence over the TxAbsIntDelay and
RxAbsIntDelay parameters. In other words, minimizing the receive
and/or transmit absolute delays does not force the controller to
generate more interrupts than what the Interrupt Throttle Rate
allows.
CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection
CAUTION:
If you are using the Intel(R) PRO/1000 CT Network Connection
(controller 82547), setting InterruptThrottleRate to a value
greater than 75,000, may hang (stop transmitting) adapters
under certain network conditions. If this occurs a NETDEV
@ -151,7 +163,8 @@ CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection
hang, ensure that InterruptThrottleRate is set no greater
than 75,000 and is not set to 0.
NOTE: When e1000 is loaded with default settings and multiple adapters
NOTE:
When e1000 is loaded with default settings and multiple adapters
are in use simultaneously, the CPU utilization may increase non-
linearly. In order to limit the CPU utilization without impacting
the overall throughput, we recommend that you load the driver as
@ -168,9 +181,11 @@ NOTE: When e1000 is loaded with default settings and multiple adapters
RxDescriptors
-------------
Valid Range: 48-256 for 82542 and 82543-based adapters
48-4096 for all other supported adapters
Default Value: 256
:Valid Range:
- 48-256 for 82542 and 82543-based adapters
- 48-4096 for all other supported adapters
:Default Value: 256
This value specifies the number of receive buffer descriptors allocated
by the driver. Increasing this value allows the driver to buffer more
@ -180,15 +195,17 @@ Each descriptor is 16 bytes. A receive buffer is also allocated for each
descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
NOTE: MTU designates the frame size. It only needs to be set for Jumbo
NOTE:
MTU designates the frame size. It only needs to be set for Jumbo
Frames. Depending on the available system resources, the request
for a higher number of receive descriptors may be denied. In this
case, use a lower number.
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 0
:Valid Range: 0-65535 (0=off)
:Default Value: 0
This value delays the generation of receive interrupts in units of 1.024
microseconds. Receive interrupt reduction can improve CPU efficiency if
@ -198,7 +215,8 @@ of TCP traffic. If the system is reporting dropped receives, this value
may be set too high, causing the driver to run out of available receive
descriptors.
CAUTION: When setting RxIntDelay to a value other than 0, adapters may
CAUTION:
When setting RxIntDelay to a value other than 0, adapters may
hang (stop transmitting) under certain network conditions. If
this occurs a NETDEV WATCHDOG message is logged in the system
event log. In addition, the controller is automatically reset,
@ -207,9 +225,11 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
Valid Range: 0-65535 (0=off)
Default Value: 128
:Valid Range: 0-65535 (0=off)
:Default Value: 128
This value, in units of 1.024 microseconds, limits the delay in which a
receive interrupt is generated. Useful only if RxIntDelay is non-zero,
@ -220,9 +240,11 @@ conditions.
Speed
-----
(This parameter is supported only on adapters with copper connections.)
Valid Settings: 0, 10, 100, 1000
Default Value: 0 (auto-negotiate at all supported speeds)
:Valid Settings: 0, 10, 100, 1000
:Default Value: 0 (auto-negotiate at all supported speeds)
Speed forces the line speed to the specified value in megabits per second
(Mbps). If this parameter is not specified or is set to 0 and the link
@ -231,22 +253,26 @@ speed. Duplex should also be set when Speed is set to either 10 or 100.
TxDescriptors
-------------
Valid Range: 48-256 for 82542 and 82543-based adapters
48-4096 for all other supported adapters
Default Value: 256
:Valid Range:
- 48-256 for 82542 and 82543-based adapters
- 48-4096 for all other supported adapters
:Default Value: 256
This value is the number of transmit descriptors allocated by the driver.
Increasing this value allows the driver to queue more transmits. Each
descriptor is 16 bytes.
NOTE: Depending on the available system resources, the request for a
NOTE:
Depending on the available system resources, the request for a
higher number of transmit descriptors may be denied. In this case,
use a lower number.
TxIntDelay
----------
Valid Range: 0-65535 (0=off)
Default Value: 8
:Valid Range: 0-65535 (0=off)
:Default Value: 8
This value delays the generation of transmit interrupts in units of
1.024 microseconds. Transmit interrupt reduction can improve CPU
@ -256,9 +282,11 @@ causing the driver to run out of available transmit descriptors.
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
Valid Range: 0-65535 (0=off)
Default Value: 32
:Valid Range: 0-65535 (0=off)
:Default Value: 32
This value, in units of 1.024 microseconds, limits the delay in which a
transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
@ -269,18 +297,21 @@ network conditions.
XsumRX
------
(This parameter is NOT supported on the 82542-based adapter.)
Valid Range: 0-1
Default Value: 1
:Valid Range: 0-1
:Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
Copybreak
---------
Valid Range: 0-xxxxxxx (0=off)
Default Value: 256
Usage: modprobe e1000.ko copybreak=128
:Valid Range: 0-xxxxxxx (0=off)
:Default Value: 256
:Usage: modprobe e1000.ko copybreak=128
Driver copies all packets below or equaling this size to a fresh RX
buffer before handing it up the stack.
@ -292,8 +323,9 @@ it is also available during runtime at
SmartPowerDownEnable
--------------------
Valid Range: 0-1
Default Value: 0 (disabled)
:Valid Range: 0-1
:Default Value: 0 (disabled)
Allows PHY to turn off in lower power states. The user can turn off
this parameter in supported chipsets.
@ -309,14 +341,14 @@ fiber interface board only links at 1000 Mbps full-duplex.
For copper-based boards, the keywords interact as follows:
The default operation is auto-negotiate. The board advertises all
- The default operation is auto-negotiate. The board advertises all
supported speed and duplex combinations, and it links at the highest
common speed and duplex mode IF the link partner is set to auto-negotiate.
If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
is advertised (The 1000BaseT spec requires auto-negotiation.)
If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
- If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
negotiation is disabled, and the AutoNeg parameter is ignored. Partner
SHOULD also be forced.
@ -328,13 +360,15 @@ process.
The parameter may be specified as either a decimal or hexadecimal value as
determined by the bitmap below.
============== ====== ====== ======= ======= ====== ====== ======= ======
Bit position 7 6 5 4 3 2 1 0
Decimal Value 128 64 32 16 8 4 2 1
Hex value 80 40 20 10 8 4 2 1
Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
Duplex Full Full Half Full Half
============== ====== ====== ======= ======= ====== ====== ======= ======
Some examples of using AutoNeg:
Some examples of using AutoNeg::
modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half)
modprobe e1000 AutoNeg=1 (Same as above)
@ -357,56 +391,59 @@ Additional Configurations
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger
than the default of 1500. Use the ifconfig command to increase the MTU
size. For example::
Jumbo Frames support is enabled by changing the MTU to a value larger than
the default of 1500. Use the ifconfig command to increase the MTU size.
For example::
ifconfig eth<x> mtu 9000 up
This setting is not saved across reboots. It can be made permanent if
you add::
This setting is not saved across reboots. It can be made permanent if
you add::
MTU=9000
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
applies to the Red Hat distributions; other distributions may store this
setting in a different location.
to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
applies to the Red Hat distributions; other distributions may store this
setting in a different location.
Notes: Degradation in throughput performance may be observed in some
Jumbo frames environments. If this is observed, increasing the
application's socket buffer size and/or increasing the
/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
Notes:
Degradation in throughput performance may be observed in some Jumbo frames
environments. If this is observed, increasing the application's socket buffer
size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
See the specific application manual and /usr/src/linux*/Documentation/
networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value
coincides with the maximum Jumbo Frames size of 16128.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
in poor performance or loss of link.
- Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
poor performance or loss of link.
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
Connection
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names::
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
The driver utilizes the ethtool interface for driver configuration and
diagnostics, as well as displaying statistical information. The ethtool
version 1.6 or later is required for this functionality.
The latest release of ethtool can be found from
https://www.kernel.org/pub/software/network/ethtool/
Enabling Wake on LAN* (WoL)
---------------------------
WoL is configured through the ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
WoL is configured through the ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
Support
=======

View File

@ -254,9 +254,7 @@ configuration.
channels->min = channels->max = 2;
/* set DAI0 to 16 bit */
snd_mask_set(&params->masks[SNDRV_PCM_HW_PARAM_FORMAT -
SNDRV_PCM_HW_PARAM_FIRST_MASK],
SNDRV_PCM_FORMAT_S16_LE);
params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
return 0;
}

View File

@ -2523,7 +2523,7 @@ S: Supported
F: drivers/scsi/esas2r
ATUSB IEEE 802.15.4 RADIO DRIVER
M: Stefan Schmidt <stefan@osg.samsung.com>
M: Stefan Schmidt <stefan@datenfreihafen.org>
L: linux-wpan@vger.kernel.org
S: Maintained
F: drivers/net/ieee802154/atusb.c
@ -5444,6 +5444,7 @@ F: drivers/iommu/exynos-iommu.c
EZchip NPS platform support
M: Vineet Gupta <vgupta@synopsys.com>
M: Ofer Levi <oferle@mellanox.com>
S: Supported
F: arch/arc/plat-eznps
F: arch/arc/boot/dts/eznps.dts
@ -5790,7 +5791,6 @@ F: include/linux/fsl/
FREESCALE SOC FS_ENET DRIVER
M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
M: Vitaly Bordug <vbordug@ru.mvista.com>
L: linuxppc-dev@lists.ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
@ -6909,7 +6909,7 @@ F: drivers/clk/clk-versaclock5.c
IEEE 802.15.4 SUBSYSTEM
M: Alexander Aring <alex.aring@gmail.com>
M: Stefan Schmidt <stefan@osg.samsung.com>
M: Stefan Schmidt <stefan@datenfreihafen.org>
L: linux-wpan@vger.kernel.org
W: http://wpan.cakelab.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git
@ -7096,6 +7096,7 @@ F: include/uapi/linux/input.h
F: include/uapi/linux/input-event-codes.h
F: include/linux/input/
F: Documentation/devicetree/bindings/input/
F: Documentation/devicetree/bindings/serio/
F: Documentation/input/
INPUT MULTITOUCH (MT) PROTOCOL
@ -7985,7 +7986,7 @@ F: lib/test_kmod.c
F: tools/testing/selftests/kmod/
KPROBES
M: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
M: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
M: Masami Hiramatsu <mhiramat@kernel.org>
@ -8629,7 +8630,7 @@ MARVELL MWIFIEX WIRELESS DRIVER
M: Amitkumar Karwar <amitkarwar@gmail.com>
M: Nishant Sarmukadam <nishants@marvell.com>
M: Ganapathi Bhat <gbhat@marvell.com>
M: Xinming Hu <huxm@marvell.com>
M: Xinming Hu <huxinming820@gmail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/marvell/mwifiex/
@ -9075,7 +9076,7 @@ S: Maintained
F: drivers/usb/mtu3/
MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES
M: Peter Senna Tschudin <peter.senna@collabora.com>
M: Peter Senna Tschudin <peter.senna@gmail.com>
M: Martin Donnelly <martin.donnelly@ge.com>
M: Martyn Welch <martyn.welch@collabora.co.uk>
S: Maintained
@ -13574,6 +13575,13 @@ L: linux-block@vger.kernel.org
S: Maintained
F: drivers/block/skd*[ch]
STI AUDIO (ASoC) DRIVERS
M: Arnaud Pouliquen <arnaud.pouliquen@st.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
F: sound/soc/sti/
STI CEC DRIVER
M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
S: Maintained
@ -13587,6 +13595,14 @@ T: git git://linuxtv.org/media_tree.git
S: Maintained
F: drivers/media/usb/stk1160/
STM32 AUDIO (ASoC) DRIVERS
M: Olivier Moysan <olivier.moysan@st.com>
M: Arnaud Pouliquen <arnaud.pouliquen@st.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/sound/st,stm32-*.txt
F: sound/soc/stm/
STM32 TIMER/LPTIMER DRIVERS
M: Fabrice Gasnier <fabrice.gasnier@st.com>
S: Maintained

View File

@ -2,7 +2,7 @@
VERSION = 4
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc8
NAME = Merciless Moray
# *DOCUMENTATION*

View File

@ -1180,13 +1180,10 @@ SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options,
struct rusage32 __user *, ur)
{
unsigned int status = 0;
struct rusage r;
long err = kernel_wait4(pid, &status, options, &r);
long err = kernel_wait4(pid, ustatus, options, &r);
if (err <= 0)
return err;
if (put_user(status, ustatus))
return -EFAULT;
if (!ur)
return err;
if (put_tv_to_tv32(&ur->ru_utime, &r.ru_utime))

View File

@ -50,6 +50,9 @@ config ARC
select HAVE_KERNEL_LZMA
select ARCH_HAS_PTE_SPECIAL
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
config MIGHT_HAVE_PCI
bool
@ -413,7 +416,7 @@ config ARC_HAS_DIV_REM
config ARC_HAS_ACCL_REGS
bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
default n
default y
help
Depending on the configuration, CPU can contain accumulator reg-pair
(also referred to as r58:r59). These can also be used by gcc as GPR so

View File

@ -16,7 +16,7 @@ endif
KBUILD_DEFCONFIG := nsim_700_defconfig
cflags-y += -fno-common -pipe -fno-builtin -D__linux__
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7
cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs
@ -140,16 +140,3 @@ dtbs: scripts
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# Hacks to enable final link due to absence of link-time branch relexation
# and gcc choosing optimal(shorter) branches at -O3
#
# vineetg Feb 2010: -mlong-calls switched off for overall kernel build
# However lib/decompress_inflate.o (.init.text) calls
# zlib_inflate_workspacesize (.text) causing relocation errors.
# Thus forcing all exten calls in this file to be long calls
export CFLAGS_decompress_inflate.o = -mmedium-calls
export CFLAGS_initramfs.o = -mmedium-calls
ifdef CONFIG_SMP
export CFLAGS_core.o = -mmedium-calls
endif

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EXPERT=y
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y

View File

@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -56,7 +56,6 @@ CONFIG_STMMAC_ETH=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y

View File

@ -48,7 +48,9 @@
})
/* Largest line length for either L1 or L2 is 128 bytes */
#define ARCH_DMA_MINALIGN 128
#define SMP_CACHE_BYTES 128
#define cache_line_size() SMP_CACHE_BYTES
#define ARCH_DMA_MINALIGN SMP_CACHE_BYTES
extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);

View File

@ -17,8 +17,11 @@
#ifndef __ASM_ARC_UDELAY_H
#define __ASM_ARC_UDELAY_H
#include <asm-generic/types.h>
#include <asm/param.h> /* HZ */
extern unsigned long loops_per_jiffy;
static inline void __delay(unsigned long loops)
{
__asm__ __volatile__(

View File

@ -234,6 +234,9 @@
POP gp
RESTORE_R12_TO_R0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm
@ -315,6 +318,9 @@
POP gp
RESTORE_R12_TO_R0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
ld sp, [sp] /* restore original sp */
/* orig_r0, ECR, user_r25 skipped automatically */
.endm

View File

@ -86,9 +86,6 @@
POP r1
POP r0
#ifdef CONFIG_ARC_CURR_IN_REG
ld r25, [sp, 12]
#endif
.endm
/*--------------------------------------------------------------

View File

@ -34,9 +34,7 @@ struct machine_desc {
const char *name;
const char **dt_compat;
void (*init_early)(void);
#ifdef CONFIG_SMP
void (*init_per_cpu)(unsigned int);
#endif
void (*init_machine)(void);
void (*init_late)(void);

View File

@ -105,7 +105,7 @@ typedef pte_t * pgtable_t;
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#define WANT_PAGE_VIRTUAL 1

View File

@ -377,7 +377,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
/* Decode a PTE containing swap "identifier "into constituents */
#define __swp_type(pte_lookalike) (((pte_lookalike).val) & 0x1f)
#define __swp_offset(pte_lookalike) ((pte_lookalike).val << 13)
#define __swp_offset(pte_lookalike) ((pte_lookalike).val >> 13)
/* NOPs, to keep generic kernel happy */
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })

View File

@ -31,10 +31,10 @@ void __init init_IRQ(void)
/* a SMP H/w block could do IPI IRQ request here */
if (plat_smp_ops.init_per_cpu)
plat_smp_ops.init_per_cpu(smp_processor_id());
#endif
if (machine_desc->init_per_cpu)
machine_desc->init_per_cpu(smp_processor_id());
#endif
}
/*

View File

@ -47,7 +47,8 @@ SYSCALL_DEFINE0(arc_gettls)
SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
{
struct pt_regs *regs = current_pt_regs();
int uval = -EFAULT;
u32 uval;
int ret;
/*
* This is only for old cores lacking LLOCK/SCOND, which by defintion
@ -60,23 +61,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
/* Z indicates to userspace if operation succeded */
regs->status32 &= ~STATUS_Z_MASK;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr));
if (!ret)
goto fail;
again:
preempt_disable();
if (__get_user(uval, uaddr))
goto done;
ret = __get_user(uval, uaddr);
if (ret)
goto fault;
if (uval == expected) {
if (!__put_user(new, uaddr))
regs->status32 |= STATUS_Z_MASK;
}
if (uval != expected)
goto out;
done:
ret = __put_user(new, uaddr);
if (ret)
goto fault;
regs->status32 |= STATUS_Z_MASK;
out:
preempt_enable();
return uval;
fault:
preempt_enable();
return uval;
if (unlikely(ret != -EFAULT))
goto fail;
down_read(&current->mm->mmap_sem);
ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
FAULT_FLAG_WRITE, NULL);
up_read(&current->mm->mmap_sem);
if (likely(!ret))
goto again;
fail:
force_sig(SIGSEGV, current);
return ret;
}
#ifdef CONFIG_ISA_ARCV2

View File

@ -1038,7 +1038,7 @@ void flush_cache_mm(struct mm_struct *mm)
void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
unsigned long pfn)
{
unsigned int paddr = pfn << PAGE_SHIFT;
phys_addr_t paddr = pfn << PAGE_SHIFT;
u_vaddr &= PAGE_MASK;
@ -1058,8 +1058,9 @@ void flush_anon_page(struct vm_area_struct *vma, struct page *page,
unsigned long u_vaddr)
{
/* TBD: do we really need to clear the kernel mapping */
__flush_dcache_page(page_address(page), u_vaddr);
__flush_dcache_page(page_address(page), page_address(page));
__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
__flush_dcache_page((phys_addr_t)page_address(page),
(phys_addr_t)page_address(page));
}
@ -1246,6 +1247,16 @@ void __init arc_cache_init_master(void)
}
}
/*
* Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger
* or equal to any cache line length.
*/
BUILD_BUG_ON_MSG(L1_CACHE_BYTES > SMP_CACHE_BYTES,
"SMP_CACHE_BYTES must be >= any cache line length");
if (is_isa_arcv2() && (l2_line_sz > SMP_CACHE_BYTES))
panic("L2 Cache line [%d] > kernel Config [%d]\n",
l2_line_sz, SMP_CACHE_BYTES);
/* Note that SLC disable not formally supported till HS 3.0 */
if (is_isa_arcv2() && l2_line_sz && !slc_enable)
arc_slc_disable();

View File

@ -129,14 +129,59 @@ int arch_dma_mmap(struct device *dev, struct vm_area_struct *vma,
return ret;
}
/*
* Cache operations depending on function and direction argument, inspired by
* https://lkml.org/lkml/2018/5/18/979
* "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20]
* dma-mapping: provide a generic dma-noncoherent implementation)"
*
* | map == for_device | unmap == for_cpu
* |----------------------------------------------------------------
* TO_DEV | writeback writeback | none none
* FROM_DEV | invalidate invalidate | invalidate* invalidate*
* BIDIR | writeback+inv writeback+inv | invalidate invalidate
*
* [*] needed for CPU speculative prefetches
*
* NOTE: we don't check the validity of direction argument as it is done in
* upper layer functions (in include/linux/dma-mapping.h)
*/
void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
size_t size, enum dma_data_direction dir)
{
dma_cache_wback(paddr, size);
switch (dir) {
case DMA_TO_DEVICE:
dma_cache_wback(paddr, size);
break;
case DMA_FROM_DEVICE:
dma_cache_inv(paddr, size);
break;
case DMA_BIDIRECTIONAL:
dma_cache_wback_inv(paddr, size);
break;
default:
break;
}
}
void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
size_t size, enum dma_data_direction dir)
{
dma_cache_inv(paddr, size);
switch (dir) {
case DMA_TO_DEVICE:
break;
/* FROM_DEVICE invalidate needed if speculative CPU prefetch only */
case DMA_FROM_DEVICE:
case DMA_BIDIRECTIONAL:
dma_cache_inv(paddr, size);
break;
default:
break;
}
}

View File

@ -21,6 +21,7 @@
#error "Incorrect ctop.h include"
#endif
#include <linux/types.h>
#include <soc/nps/common.h>
/* core auxiliary registers */
@ -143,6 +144,15 @@ struct nps_host_reg_gim_p_int_dst {
};
/* AUX registers definition */
struct nps_host_reg_aux_dpc {
union {
struct {
u32 ien:1, men:1, hen:1, reserved:29;
};
u32 value;
};
};
struct nps_host_reg_aux_udmc {
union {
struct {

View File

@ -15,6 +15,8 @@
*/
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/log2.h>
#include <asm/arcregs.h>
@ -157,10 +159,10 @@ void mtm_enable_core(unsigned int cpu)
/* Verify and set the value of the mtm hs counter */
static int __init set_mtm_hs_ctr(char *ctr_str)
{
long hs_ctr;
int hs_ctr;
int ret;
ret = kstrtol(ctr_str, 0, &hs_ctr);
ret = kstrtoint(ctr_str, 0, &hs_ctr);
if (ret || hs_ctr > MT_HS_CNT_MAX || hs_ctr < MT_HS_CNT_MIN) {
pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",

View File

@ -7,5 +7,8 @@
menuconfig ARC_SOC_HSDK
bool "ARC HS Development Kit SOC"
depends on ISA_ARCV2
select ARC_HAS_ACCL_REGS
select CLK_HSDK
select RESET_HSDK
select MIGHT_HAVE_PCI

View File

@ -42,6 +42,66 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108)
#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30)
#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000)
static void __init hsdk_enable_gpio_intc_wire(void)
{
/*
* Peripherals on CPU Card are wired to cpu intc via intermediate
* DW APB GPIO blocks (mainly for debouncing)
*
* ---------------------
* | snps,archs-intc |
* ---------------------
* |
* ----------------------
* | snps,archs-idu-intc |
* ----------------------
* | | | | |
* | [eth] [USB] [... other peripherals]
* |
* -------------------
* | snps,dw-apb-intc |
* -------------------
* | | | |
* [Bt] [HAPS] [... other peripherals]
*
* Current implementation of "irq-dw-apb-ictl" driver doesn't work well
* with stacked INTCs. In particular problem happens if its master INTC
* not yet instantiated. See discussion here -
* https://lkml.org/lkml/2015/3/4/755
*
* So setup the first gpio block as a passive pass thru and hide it from
* DT hardware topology - connect intc directly to cpu intc
* The GPIO "wire" needs to be init nevertheless (here)
*
* One side adv is that peripheral interrupt handling avoids one nested
* intc ISR hop
*
* According to HSDK User's Manual [1], "Table 2 Interrupt Mapping"
* we have the following GPIO input lines used as sources of interrupt:
* - GPIO[0] - Bluetooth interrupt of RS9113 module
* - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector)
* - GPIO[3] - Audio codec (MAX9880A) interrupt
* - GPIO[8-23] - Available on Arduino and PMOD_x headers
* For now there's no use of Arduino and PMOD_x headers in Linux
* use-case so we only enable lines 0, 2 and 3.
*
* [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
*/
#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30)
#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34)
#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38)
#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c)
#define GPIO_INT_CONNECTED_MASK 0x0d
iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK);
iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK);
iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL);
iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY);
iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
}
static void __init hsdk_init_early(void)
{
/*
@ -62,6 +122,8 @@ static void __init hsdk_init_early(void)
* minimum possible div-by-2.
*/
iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT);
hsdk_enable_gpio_intc_wire();
}
static const char *hsdk_compat[] __initconst = {

View File

@ -692,7 +692,7 @@
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;

View File

@ -159,13 +159,7 @@
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
};
&dss {
status = "okay";
};
&gpio6 {
pwm8: dmtimer-pwm-8 {
pinctrl-names = "default";
pinctrl-0 = <&vibrator_direction_pin>;
@ -192,7 +186,10 @@
pwm-names = "enable", "direction";
direction-duty-cycle-ns = <10000000>;
};
};
&dss {
status = "okay";
};
&dsi1 {

View File

@ -48,6 +48,7 @@ saved_pc .req lr
* from those features make this path too inefficient.
*/
ret_fast_syscall:
__ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
disable_irq_notrace @ disable interrupts
@ -78,6 +79,7 @@ fast_work_pending:
* call.
*/
ret_fast_syscall:
__ret_fast_syscall:
UNWIND(.fnstart )
UNWIND(.cantunwind )
str r0, [sp, #S_R0 + S_OFF]! @ save returned r0
@ -255,7 +257,7 @@ local_restart:
tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
bne __sys_trace
invoke_syscall tbl, scno, r10, ret_fast_syscall
invoke_syscall tbl, scno, r10, __ret_fast_syscall
add r1, sp, #S_OFF
2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)

View File

@ -338,6 +338,7 @@ static struct vm_area_struct gate_vma = {
static int __init gate_vma_init(void)
{
vma_init(&gate_vma, NULL);
gate_vma.vm_page_prot = PAGE_READONLY_EXEC;
return 0;
}

View File

@ -4,6 +4,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/platform_data/i2c-pxa.h>
@ -59,16 +60,6 @@ static struct resource pxamci_resources[] = {
.end = IRQ_MMC,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = 21,
.end = 21,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = 22,
.end = 22,
.flags = IORESOURCE_DMA,
},
};
static u64 pxamci_dmamask = 0xffffffffUL;
@ -406,16 +397,6 @@ static struct resource pxa_ir_resources[] = {
.end = 0x40700023,
.flags = IORESOURCE_MEM,
},
[5] = {
.start = 17,
.end = 17,
.flags = IORESOURCE_DMA,
},
[6] = {
.start = 18,
.end = 18,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa_device_ficp = {
@ -544,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = {
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 13,
.end = 13,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 14,
.end = 14,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa25x_device_ssp = {
@ -582,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = {
.end = IRQ_NSSP,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 15,
.end = 15,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 16,
.end = 16,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa25x_device_nssp = {
@ -620,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = {
.end = IRQ_ASSP,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 23,
.end = 23,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 24,
.end = 24,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa25x_device_assp = {
@ -750,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = {
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 13,
.end = 13,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 14,
.end = 14,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa27x_device_ssp1 = {
@ -788,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = {
.end = IRQ_SSP2,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 15,
.end = 15,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 16,
.end = 16,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa27x_device_ssp2 = {
@ -826,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = {
.end = IRQ_SSP3,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 66,
.end = 66,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 67,
.end = 67,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa27x_device_ssp3 = {
@ -894,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = {
.end = IRQ_MMC2,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = 93,
.end = 93,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = 94,
.end = 94,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa3xx_device_mci2 = {
@ -933,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = {
.end = IRQ_MMC3,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = 100,
.end = 100,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = 101,
.end = 101,
.flags = IORESOURCE_DMA,
},
};
struct platform_device pxa3xx_device_mci3 = {
@ -1020,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = {
.end = IRQ_NAND,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for Data DMA */
.start = 97,
.end = 97,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for Command DMA */
.start = 99,
.end = 99,
.flags = IORESOURCE_DMA,
},
};
static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
@ -1065,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = {
.end = IRQ_SSP4,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for RX */
.start = 2,
.end = 2,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for TX */
.start = 3,
.end = 3,
.flags = IORESOURCE_DMA,
},
};
/*
@ -1202,11 +1067,6 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
platform_device_add(pd);
}
static struct mmp_dma_platdata pxa_dma_pdata = {
.dma_channels = 0,
.nb_requestors = 0,
};
static struct resource pxa_dma_resource[] = {
[0] = {
.start = 0x40000000,
@ -1233,9 +1093,7 @@ static struct platform_device pxa2xx_pxa_dma = {
.resource = pxa_dma_resource,
};
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata)
{
pxa_dma_pdata.dma_channels = nb_channels;
pxa_dma_pdata.nb_requestors = nb_requestors;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
pxa_register_device(&pxa2xx_pxa_dma, dma_pdata);
}

View File

@ -1,4 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0 */
#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \
.prio = PXAD_PRIO_##_prio, .drcmr = _requestor })
struct mmp_dma_platdata;
extern struct platform_device pxa_device_pmu;
extern struct platform_device pxa_device_mci;
extern struct platform_device pxa3xx_device_mci2;
@ -55,7 +59,7 @@ extern struct platform_device pxa3xx_device_gpio;
extern struct platform_device pxa93x_device_gpio;
void __init pxa_register_device(struct platform_device *dev, void *data);
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata);
struct i2c_pxa_platform_data;
extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);

View File

@ -16,6 +16,8 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
@ -26,6 +28,7 @@
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@ -201,6 +204,39 @@ static struct platform_device *pxa25x_devices[] __initdata = {
&pxa_device_asoc_platform,
};
static const struct dma_slave_map pxa25x_slave_map[] = {
/* PXA25x, PXA27x and PXA3xx common entries */
{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
PDMA_FILTER_PARAM(LOWEST, 10) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
/* PXA25x specific map */
{ "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
{ "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
{ "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
{ "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
{ "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) },
{ "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) },
};
static struct mmp_dma_platdata pxa25x_dma_pdata = {
.dma_channels = 16,
.nb_requestors = 40,
.slave_map = pxa25x_slave_map,
.slave_map_cnt = ARRAY_SIZE(pxa25x_slave_map),
};
static int __init pxa25x_init(void)
{
int ret = 0;
@ -215,7 +251,7 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
if (!of_have_populated_dt()) {
pxa2xx_set_dmac_info(16, 40);
pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));

View File

@ -11,6 +11,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
#include <linux/gpio.h>
#include <linux/gpio-pxa.h>
#include <linux/module.h>
@ -23,6 +25,7 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@ -297,6 +300,40 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
static const struct dma_slave_map pxa27x_slave_map[] = {
/* PXA25x, PXA27x and PXA3xx common entries */
{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
PDMA_FILTER_PARAM(LOWEST, 10) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
/* PXA27x specific map */
{ "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
{ "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
{ "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) },
{ "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) },
{ "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) },
};
static struct mmp_dma_platdata pxa27x_dma_pdata = {
.dma_channels = 32,
.nb_requestors = 75,
.slave_map = pxa27x_slave_map,
.slave_map_cnt = ARRAY_SIZE(pxa27x_slave_map),
};
static int __init pxa27x_init(void)
{
int ret = 0;
@ -313,7 +350,7 @@ static int __init pxa27x_init(void)
if (!of_have_populated_dt()) {
pxa_register_device(&pxa27x_device_gpio,
&pxa27x_gpio_info);
pxa2xx_set_dmac_info(32, 75);
pxa2xx_set_dmac_info(&pxa27x_dma_pdata);
ret = platform_add_devices(devices,
ARRAY_SIZE(devices));
}

View File

@ -12,6 +12,8 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/dmaengine.h>
#include <linux/dma/pxa-dma.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@ -24,6 +26,7 @@
#include <linux/of.h>
#include <linux/syscore_ops.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/platform_data/mmp_dma.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>
@ -421,6 +424,42 @@ static struct platform_device *devices[] __initdata = {
&pxa27x_device_pwm1,
};
static const struct dma_slave_map pxa3xx_slave_map[] = {
/* PXA25x, PXA27x and PXA3xx common entries */
{ "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) },
{ "pxa2xx-ac97", "pcm_pcm_aux_mono_out",
PDMA_FILTER_PARAM(LOWEST, 10) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) },
{ "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) },
{ "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) },
{ "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) },
{ "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) },
{ "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) },
{ "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) },
{ "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) },
{ "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) },
{ "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) },
{ "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) },
{ "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) },
/* PXA3xx specific map */
{ "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) },
{ "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) },
{ "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) },
{ "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) },
{ "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) },
{ "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) },
{ "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) },
};
static struct mmp_dma_platdata pxa3xx_dma_pdata = {
.dma_channels = 32,
.nb_requestors = 100,
.slave_map = pxa3xx_slave_map,
.slave_map_cnt = ARRAY_SIZE(pxa3xx_slave_map),
};
static int __init pxa3xx_init(void)
{
int ret = 0;
@ -456,7 +495,7 @@ static int __init pxa3xx_init(void)
if (of_have_populated_dt())
return 0;
pxa2xx_set_dmac_info(32, 100);
pxa2xx_set_dmac_info(&pxa3xx_dma_pdata);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
return ret;

View File

@ -212,7 +212,7 @@ static DEFINE_MUTEX(ecard_mutex);
*/
static void ecard_init_pgtables(struct mm_struct *mm)
{
struct vm_area_struct vma;
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC);
/* We want to set up the page tables for the following mapping:
* Virtual Physical
@ -237,9 +237,6 @@ static void ecard_init_pgtables(struct mm_struct *mm)
memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
vma.vm_flags = VM_EXEC;
vma.vm_mm = mm;
flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
}

View File

@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev)
if (IS_ERR(ssp->clk))
return PTR_ERR(ssp->clk);
if (dev->of_node) {
struct of_phandle_args dma_spec;
struct device_node *np = dev->of_node;
int ret;
/*
* FIXME: we should allocate the DMA channel from this
* context and pass the channel down to the ssp users.
* For now, we lookup the rx and tx indices manually
*/
/* rx */
ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
0, &dma_spec);
if (ret) {
dev_err(dev, "Can't parse dmas property\n");
return -ENODEV;
}
ssp->drcmr_rx = dma_spec.args[0];
of_node_put(dma_spec.np);
/* tx */
ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
1, &dma_spec);
if (ret) {
dev_err(dev, "Can't parse dmas property\n");
return -ENODEV;
}
ssp->drcmr_tx = dma_spec.args[0];
of_node_put(dma_spec.np);
} else {
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
if (res == NULL) {
dev_err(dev, "no SSP RX DRCMR defined\n");
return -ENODEV;
}
ssp->drcmr_rx = res->start;
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (res == NULL) {
dev_err(dev, "no SSP TX DRCMR defined\n");
return -ENODEV;
}
ssp->drcmr_tx = res->start;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(dev, "no memory resource defined\n");

View File

@ -488,9 +488,13 @@ static int gcm_decrypt(struct aead_request *req)
err = skcipher_walk_done(&walk,
walk.nbytes % AES_BLOCK_SIZE);
}
if (walk.nbytes)
pmull_gcm_encrypt_block(iv, iv, NULL,
if (walk.nbytes) {
kernel_neon_begin();
pmull_gcm_encrypt_block(iv, iv, ctx->aes_key.key_enc,
num_rounds(&ctx->aes_key));
kernel_neon_end();
}
} else {
__aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv,
num_rounds(&ctx->aes_key));

View File

@ -37,7 +37,7 @@ static inline void __tlb_remove_table(void *_table)
static inline void tlb_flush(struct mmu_gather *tlb)
{
struct vm_area_struct vma = { .vm_mm = tlb->mm, };
struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0);
/*
* The ASID allocator will either invalidate the ASID or mark

View File

@ -1351,9 +1351,9 @@ static void __update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
static void update_cpu_capabilities(u16 scope_mask)
{
__update_cpu_capabilities(arm64_features, scope_mask, "detected:");
__update_cpu_capabilities(arm64_errata, scope_mask,
"enabling workaround for");
__update_cpu_capabilities(arm64_features, scope_mask, "detected:");
}
static int __enable_cpu_capability(void *arg)
@ -1408,8 +1408,8 @@ __enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
static void __init enable_cpu_capabilities(u16 scope_mask)
{
__enable_cpu_capabilities(arm64_features, scope_mask);
__enable_cpu_capabilities(arm64_errata, scope_mask);
__enable_cpu_capabilities(arm64_features, scope_mask);
}
/*

View File

@ -108,7 +108,6 @@ static pte_t get_clear_flush(struct mm_struct *mm,
unsigned long pgsize,
unsigned long ncontig)
{
struct vm_area_struct vma = { .vm_mm = mm };
pte_t orig_pte = huge_ptep_get(ptep);
bool valid = pte_valid(orig_pte);
unsigned long i, saddr = addr;
@ -125,8 +124,10 @@ static pte_t get_clear_flush(struct mm_struct *mm,
orig_pte = pte_mkdirty(orig_pte);
}
if (valid)
if (valid) {
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
flush_tlb_range(&vma, saddr, addr);
}
return orig_pte;
}
@ -145,7 +146,7 @@ static void clear_flush(struct mm_struct *mm,
unsigned long pgsize,
unsigned long ncontig)
{
struct vm_area_struct vma = { .vm_mm = mm };
struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
unsigned long i, saddr = addr;
for (i = 0; i < ncontig; i++, addr += pgsize, ptep++)

View File

@ -611,11 +611,13 @@ void __init mem_init(void)
BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64);
#endif
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/*
* Make sure we chose the upper bound of sizeof(struct page)
* correctly.
* correctly when sizing the VMEMMAP array.
*/
BUILD_BUG_ON(sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT));
#endif
if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
extern int sysctl_overcommit_memory;

View File

@ -115,12 +115,11 @@ ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned
flush_tlb_all();
} else {
/*
* XXX fix me: flush_tlb_range() should take an mm pointer instead of a
* vma pointer.
* flush_tlb_range() takes a vma instead of a mm pointer because
* some architectures want the vm_flags for ITLB/DTLB flush.
*/
struct vm_area_struct vma;
struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0);
vma.vm_mm = tlb->mm;
/* flush the address range from the tlb: */
flush_tlb_range(&vma, start, end);
/* now flush the virt. page-table area mapping the address range: */

View File

@ -2278,17 +2278,15 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
DPRINT(("smpl_buf @%p\n", smpl_buf));
/* allocate vma */
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(mm);
if (!vma) {
DPRINT(("Cannot allocate vma\n"));
goto error_kmem;
}
INIT_LIST_HEAD(&vma->anon_vma_chain);
/*
* partially initialize the vma for the sampling buffer
*/
vma->vm_mm = mm;
vma->vm_file = get_file(filp);
vma->vm_flags = VM_READ|VM_MAYREAD|VM_DONTEXPAND|VM_DONTDUMP;
vma->vm_page_prot = PAGE_READONLY; /* XXX may need to change */
@ -2346,7 +2344,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
return 0;
error:
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
error_kmem:
pfm_rvfree(smpl_buf, size);

View File

@ -114,10 +114,9 @@ ia64_init_addr_space (void)
* the problem. When the process attempts to write to the register backing store
* for the first time, it will get a SEGFAULT in this case.
*/
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(current->mm);
if (vma) {
INIT_LIST_HEAD(&vma->anon_vma_chain);
vma->vm_mm = current->mm;
vma_set_anonymous(vma);
vma->vm_start = current->thread.rbs_bot & PAGE_MASK;
vma->vm_end = vma->vm_start + PAGE_SIZE;
vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT;
@ -125,7 +124,7 @@ ia64_init_addr_space (void)
down_write(&current->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(&current->mm->mmap_sem);
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
return;
}
up_write(&current->mm->mmap_sem);
@ -133,10 +132,9 @@ ia64_init_addr_space (void)
/* map NaT-page at address zero to speed up speculative dereferencing of NULL: */
if (!(current->personality & MMAP_PAGE_ZERO)) {
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma = vm_area_alloc(current->mm);
if (vma) {
INIT_LIST_HEAD(&vma->anon_vma_chain);
vma->vm_mm = current->mm;
vma_set_anonymous(vma);
vma->vm_end = PAGE_SIZE;
vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT);
vma->vm_flags = VM_READ | VM_MAYREAD | VM_IO |
@ -144,7 +142,7 @@ ia64_init_addr_space (void)
down_write(&current->mm->mmap_sem);
if (insert_vm_struct(current->mm, vma)) {
up_write(&current->mm->mmap_sem);
kmem_cache_free(vm_area_cachep, vma);
vm_area_free(vma);
return;
}
up_write(&current->mm->mmap_sem);
@ -277,7 +275,7 @@ static struct vm_area_struct gate_vma;
static int __init gate_vma_init(void)
{
gate_vma.vm_mm = NULL;
vma_init(&gate_vma, NULL);
gate_vma.vm_start = FIXADDR_USER_START;
gate_vma.vm_end = FIXADDR_USER_END;
gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC;

View File

@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
void ath79_ddr_wb_flush(u32 reg)
{
void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4);
/* Flush the DDR write buffer. */
__raw_writel(0x1, flush_reg);

Some files were not shown because too many files have changed in this diff Show More