collie: convert to gpiolib for ucb1x00

Only the parts used for collie_battery are converted.
The rest will be cleaned up later.
This commit is contained in:
Thomas Kunze 2009-02-10 14:12:02 +01:00 committed by Thomas Kunze
parent 9ca3dc805c
commit f7177c8452
2 changed files with 19 additions and 17 deletions

View File

@ -86,6 +86,7 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
static struct mcp_plat_data collie_mcp_data = {
.mccr0 = MCCR0_ADM | MCCR0_ExtClk,
.sclk_rate = 9216000,
.gpio_base = COLLIE_TC35143_GPIO_BASE,
};
#ifdef CONFIG_SHARP_LOCOMO

View File

@ -25,10 +25,10 @@
#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
#define COLLIE_SCOOP_IO_DIR ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
COLLIE_SCP_LB_VOL_CHG )
#define COLLIE_SCOOP_IO_OUT ( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
COLLIE_SCP_LB_VOL_CHG)
#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
/* GPIOs for gpiolib */
@ -80,19 +80,20 @@
#define COLLIE_LCM_IRQ_GPIO_nSD_WP IRQ_LOCOMO_GPIO14
/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0 /* GPIO0=Version */
#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1 /* GPIO1=TBL_CHK */
#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2 /* GPIO2=VPNE_ON */
#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3 /* GPIO3=IR_ON */
#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4 /* GPIO4=AMP_ON */
#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5 /* GPIO5=Version */
#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5 /* GPIO5=fs 8k LPF */
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6 /* GPIO6=BUZZER BIAS */
#define COLLIE_TC35143_GPIO_MBAT_ON UCB_IO_7 /* GPIO7=MBAT_ON */
#define COLLIE_TC35143_GPIO_BBAT_ON UCB_IO_8 /* GPIO8=BBAT_ON */
#define COLLIE_TC35143_GPIO_TMP_ON UCB_IO_9 /* GPIO9=TMP_ON */
#define COLLIE_TC35143_GPIO_IN ( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
#define COLLIE_TC35143_GPIO_OUT ( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
#define COLLIE_TC35143_GPIO_IR_ON UCB_IO_3
#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7)
#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8)
#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9)
#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
| UCB_IO_6)
#endif