From 14d87e6c399f3942d63dff41447ff08a615d9a6b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Jul 2009 10:28:19 -0700 Subject: [PATCH 001/338] sparc: Fix cleanup crash in bbc_envctrl_cleanup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If kthread_run() fails or never gets to run we'll have NULL or a pointer encoded error in kenvctrld_task, rather than a legitimate task pointer. So this makes bbc_envctrl_cleanup() crash as it passed this bogus pointer into kthread_stop(). Reported-by: BERTRAND Joël Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_envctrl.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c index 15dab96d05e3..7c815d3327f7 100644 --- a/drivers/sbus/char/bbc_envctrl.c +++ b/drivers/sbus/char/bbc_envctrl.c @@ -537,8 +537,12 @@ int bbc_envctrl_init(struct bbc_i2c_bus *bp) } if (temp_index != 0 && fan_index != 0) { kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); - if (IS_ERR(kenvctrld_task)) - return PTR_ERR(kenvctrld_task); + if (IS_ERR(kenvctrld_task)) { + int err = PTR_ERR(kenvctrld_task); + + kenvctrld_task = NULL; + return err; + } } return 0; @@ -561,7 +565,8 @@ void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp) struct bbc_cpu_temperature *tp, *tpos; struct bbc_fan_control *fp, *fpos; - kthread_stop(kenvctrld_task); + if (kenvctrld_task) + kthread_stop(kenvctrld_task); list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) { list_del(&tp->bp_list); From 58cda884ecc87dcce18d463b0c8bd928dae63ad8 Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: [PATCH 002/338] OMAP3 SDRC: add support for 2 SDRAM chip selects Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3beagle.c | 3 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 3 +- arch/arm/mach-omap2/board-overo.c | 3 +- arch/arm/mach-omap2/board-rx51.c | 2 +- arch/arm/mach-omap2/board-zoom2.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 35 ++++-- arch/arm/mach-omap2/io.c | 5 +- arch/arm/mach-omap2/sdrc.c | 63 ++++++---- arch/arm/mach-omap2/sram34xx.S | 141 ++++++++++++++++++----- arch/arm/plat-omap/include/mach/io.h | 3 +- arch/arm/plat-omap/include/mach/sdrc.h | 11 +- arch/arm/plat-omap/include/mach/sram.h | 23 ++-- arch/arm/plat-omap/sram.c | 30 +++-- 21 files changed, 237 insertions(+), 103 deletions(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 9c3fdcdf76c3..8ec2a132904d 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -141,7 +141,7 @@ static inline void board_smc91x_init(void) static void __init omap_2430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 496a90e4ea7a..ac262cd74503 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = { static void __init omap_3430sdp_init_irq(void) { - omap2_init_common_hw(hyb18m512160af6_sdrc_params); + omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 57e477bd89c6..b0c7402248f7 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -59,7 +59,7 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); #endif diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 06dfba888b0c..dcfc20d03894 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -250,7 +250,7 @@ out: static void __init omap_apollon_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); apollon_init_smc91x(); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 3492162a65c3..fd00aa03690c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init omap_generic_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); } diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e7d017cdc438..7b1d61d5bb2c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -270,7 +270,7 @@ static void __init h4_init_flash(void) static void __init omap_h4_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); h4_init_flash(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d8bc0a7dcb8d..ea383f88cb1b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void) static void __init omap_ldp_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); ldp_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 991ac9c38032..4abefd9566e8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void) static void __init omap3_beagle_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(12); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index d3cc145814d0..217e5a2861d3 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -279,7 +279,7 @@ struct spi_board_info omap3evm_spi_board_info[] = { static void __init omap3_evm_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL); omap_init_irq(); omap_gpio_init(); omap3evm_init_smc911x(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index e32aa23ce962..9b991ced3822 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -310,7 +310,8 @@ static int __init omap3pandora_i2c_init(void) static void __init omap3pandora_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb5..44bc1c54cd03 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -360,7 +360,8 @@ static int __init overo_i2c_init(void) static void __init overo_init_irq(void) { - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 374ff63c3eb2..591ae8a58054 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = { static void __init rx51_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index bcc0f7632dea..427b7b8b1237 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -25,7 +25,7 @@ static void __init omap_zoom2_init_irq(void) { - omap2_init_common_hw(NULL); + omap2_init_common_hw(NULL, NULL); omap_init_irq(); omap_gpio_init(); } diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 045da923e75b..1c6480d3ad62 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -725,7 +725,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) u32 unlock_dll = 0; u32 c; unsigned long validrate, sdrcrate, mpurate; - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sdrc_cs0; + struct omap_sdrc_params *sdrc_cs1; + int ret; if (!clk || !rate) return -EINVAL; @@ -743,8 +745,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) else sdrcrate >>= ((clk->rate / rate) >> 1); - sp = omap2_sdrc_get_params(sdrcrate); - if (!sp) + ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1); + if (ret) return -EINVAL; if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) { @@ -765,12 +767,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate, validrate); - pr_debug("clock: SDRC timing params used: %08x %08x %08x\n", - sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb); + pr_debug("clock: SDRC CS0 timing params used:" + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr); + if (sdrc_cs1) + pr_debug("clock: SDRC CS1 timing params used: " + " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n", + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); - omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla, - sp->actim_ctrlb, new_div, unlock_dll, c, - sp->mr, rate > clk->rate); + if (sdrc_cs1) + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla, + sdrc_cs1->actim_ctrlb, sdrc_cs1->mr); + else + omap3_configure_core_dpll( + new_div, unlock_dll, c, rate > clk->rate, + sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, + sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, + 0, 0, 0, 0); return 0; } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3a86b0f66031..e9b9bcb19b4e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } -void __init omap2_init_common_hw(struct omap_sdrc_params *sp) +void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { omap2_mux_init(); #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */ pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); - omap2_sdrc_init(sp); + omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); #endif gpmc_init(); diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2045441e8385..2e9e38db30e9 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -32,7 +32,7 @@ #include #include "sdrc.h" -static struct omap_sdrc_params *sdrc_init_params; +static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1; void __iomem *omap2_sdrc_base; void __iomem *omap2_sms_base; @@ -45,33 +45,49 @@ void __iomem *omap2_sms_base; /** * omap2_sdrc_get_params - return SDRC register values for a given clock rate * @r: SDRC clock rate (in Hz) + * @sdrc_cs0: chip select 0 ram timings ** + * @sdrc_cs1: chip select 1 ram timings ** * * Return pre-calculated values for the SDRC_ACTIM_CTRLA, - * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given - * SDRC clock rate 'r'. These parameters control various timing - * delays in the SDRAM controller that are expressed in terms of the - * number of SDRC clock cycles to wait; hence the clock rate - * dependency. Note that sdrc_init_params must be sorted rate - * descending. Also assumes that both chip-selects use the same - * timing parameters. Returns a struct omap_sdrc_params * upon - * success, or NULL upon failure. + * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01] + * structs,for a given SDRC clock rate 'r'. + * These parameters control various timing delays in the SDRAM controller + * that are expressed in terms of the number of SDRC clock cycles to + * wait; hence the clock rate dependency. + * + * Supports 2 different timing parameters for both chip selects. + * + * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending. + * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size + * as sdrc_init_params_cs_0. + * + * Fills in the struct omap_sdrc_params * for each chip select. + * Returns 0 upon success or -1 upon failure. */ -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r) +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1) { - struct omap_sdrc_params *sp; + struct omap_sdrc_params *sp0, *sp1; - if (!sdrc_init_params) - return NULL; + if (!sdrc_init_params_cs0) + return -1; - sp = sdrc_init_params; + sp0 = sdrc_init_params_cs0; + sp1 = sdrc_init_params_cs1; - while (sp->rate && sp->rate != r) - sp++; + while (sp0->rate && sp0->rate != r) { + sp0++; + if (sdrc_init_params_cs1) + sp1++; + } - if (!sp->rate) - return NULL; + if (!sp0->rate) + return -1; - return sp; + *sdrc_cs0 = sp0; + *sdrc_cs1 = sp1; + return 0; } @@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals) /** * omap2_sdrc_init - initialize SMS, SDRC devices on boot - * @sp: pointer to a null-terminated list of struct omap_sdrc_params + * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params + * Support for 2 chip selects timings * * Turn on smart idle modes for SDRAM scheduler and controller. * Program a known-good configuration for the SDRC to deal with buggy * bootloaders. */ -void __init omap2_sdrc_init(struct omap_sdrc_params *sp) +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1) { u32 l; @@ -103,7 +121,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp) l |= (0x2 << 3); sdrc_write_reg(l, SDRC_SYSCONFIG); - sdrc_init_params = sp; + sdrc_init_params_cs0 = sdrc_cs0; + sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index f41f8d96ddba..3aef7448b2a5 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -36,7 +36,7 @@ .text -/* r4 parameters */ +/* r1 parameters */ #define SDRC_NO_UNLOCK_DLL 0x0 #define SDRC_UNLOCK_DLL 0x1 @@ -71,40 +71,71 @@ /* * omap3_sram_configure_core_dpll - change DPLL3 M2 divider - * r0 = new SDRC_RFR_CTRL register contents - * r1 = new SDRC_ACTIM_CTRLA register contents - * r2 = new SDRC_ACTIM_CTRLB register contents - * r3 = new M2 divider setting (only 1 and 2 supported right now) - * r4 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for - * SDRC rates < 83MHz - * r5 = number of MPU cycles to wait for SDRC to stabilize after - * reprogramming the SDRC when switching to a slower MPU speed - * r6 = new SDRC_MR_0 register value - * r7 = increasing SDRC rate? (1 = yes, 0 = no) * + * Params passed in registers: + * r0 = new M2 divider setting (only 1 and 2 supported right now) + * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for + * SDRC rates < 83MHz + * r2 = number of MPU cycles to wait for SDRC to stabilize after + * reprogramming the SDRC when switching to a slower MPU speed + * r3 = increasing SDRC rate? (1 = yes, 0 = no) + * + * Params passed via the stack. The needed params will be copied in SRAM + * before use by the code in SRAM (SDRAM is not accessible during SDRC + * reconfiguration): + * new SDRC_RFR_CTRL_0 register contents + * new SDRC_ACTIM_CTRL_A_0 register contents + * new SDRC_ACTIM_CTRL_B_0 register contents + * new SDRC_MR_0 register value + * new SDRC_RFR_CTRL_1 register contents + * new SDRC_ACTIM_CTRL_A_1 register contents + * new SDRC_ACTIM_CTRL_B_1 register contents + * new SDRC_MR_1 register value + * + * If the param SDRC_RFR_CTRL_1 is 0, the parameters + * are not programmed into the SDRC CS1 registers */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack - ldr r4, [sp, #52] @ pull extra args off the stack - ldr r5, [sp, #56] @ load extra args from the stack - ldr r6, [sp, #60] @ load extra args from the stack - ldr r7, [sp, #64] @ load extra args from the stack + + @ pull the extra args off the stack + @ and store them in SRAM + ldr r4, [sp, #52] + str r4, omap_sdrc_rfr_ctrl_0_val + ldr r4, [sp, #56] + str r4, omap_sdrc_actim_ctrl_a_0_val + ldr r4, [sp, #60] + str r4, omap_sdrc_actim_ctrl_b_0_val + ldr r4, [sp, #64] + str r4, omap_sdrc_mr_0_val + ldr r4, [sp, #68] + str r4, omap_sdrc_rfr_ctrl_1_val + cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_params @ do not use cs1 params + ldr r4, [sp, #72] + str r4, omap_sdrc_actim_ctrl_a_1_val + ldr r4, [sp, #76] + str r4, omap_sdrc_actim_ctrl_b_1_val + ldr r4, [sp, #80] + str r4, omap_sdrc_mr_1_val +skip_cs1_params: dsb @ flush buffered writes to interconnect - cmp r7, #1 @ if increasing SDRC clk rate, + + cmp r3, #1 @ if increasing SDRC clk rate, bleq configure_sdrc @ program the SDRC regs early (for RFR) - cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state + cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state bleq unlock_dll blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider bl enable_sdrc @ take SDRC out of idle - cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change + cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock blne wait_dll_lock - cmp r7, #1 @ if increasing SDRC clk rate, + cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r5 + mov r12, r2 bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here @@ -149,7 +180,7 @@ configure_core_dpll: ldr r12, [r11] ldr r10, core_m2_mask_val @ modify m2 for core dpll and r12, r12, r10 - orr r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT + orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT str r12, [r11] ldr r12, [r11] @ posted-write barrier for CM bx lr @@ -187,15 +218,34 @@ wait_dll_unlock: bne wait_dll_unlock bx lr configure_sdrc: - ldr r11, omap3_sdrc_rfr_ctrl - str r0, [r11] - ldr r11, omap3_sdrc_actim_ctrla - str r1, [r11] - ldr r11, omap3_sdrc_actim_ctrlb - str r2, [r11] + ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM + ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM + str r12, [r11] @ store + ldr r12, omap_sdrc_actim_ctrl_a_0_val + ldr r11, omap3_sdrc_actim_ctrl_a_0 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_0_val + ldr r11, omap3_sdrc_actim_ctrl_b_0 + str r12, [r11] + ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 - str r6, [r11] - ldr r6, [r11] @ posted-write barrier for SDRC + str r12, [r11] + ldr r12, omap_sdrc_rfr_ctrl_1_val + cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, + beq skip_cs1_prog @ do not program cs1 params + ldr r11, omap3_sdrc_rfr_ctrl_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_a_1_val + ldr r11, omap3_sdrc_actim_ctrl_a_1 + str r12, [r11] + ldr r12, omap_sdrc_actim_ctrl_b_1_val + ldr r11, omap3_sdrc_actim_ctrl_b_1 + str r12, [r11] + ldr r12, omap_sdrc_mr_1_val + ldr r11, omap3_sdrc_mr_1 + str r12, [r11] +skip_cs1_prog: + ldr r12, [r11] @ posted-write barrier for SDRC bx lr omap3_sdrc_power: @@ -206,14 +256,40 @@ omap3_cm_idlest1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) omap3_cm_iclken1_core: .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) -omap3_sdrc_rfr_ctrl: + +omap3_sdrc_rfr_ctrl_0: .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) -omap3_sdrc_actim_ctrla: +omap3_sdrc_rfr_ctrl_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1) +omap3_sdrc_actim_ctrl_a_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) -omap3_sdrc_actim_ctrlb: +omap3_sdrc_actim_ctrl_a_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1) +omap3_sdrc_actim_ctrl_b_0: .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_actim_ctrl_b_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1) omap3_sdrc_mr_0: .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0) +omap3_sdrc_mr_1: + .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1) +omap_sdrc_rfr_ctrl_0_val: + .word 0xDEADBEEF +omap_sdrc_rfr_ctrl_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_a_1_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_0_val: + .word 0xDEADBEEF +omap_sdrc_actim_ctrl_b_1_val: + .word 0xDEADBEEF +omap_sdrc_mr_0_val: + .word 0xDEADBEEF +omap_sdrc_mr_1_val: + .word 0xDEADBEEF + omap3_sdrc_dlla_status: .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) omap3_sdrc_dlla_ctrl: @@ -223,3 +299,4 @@ core_m2_mask_val: ENTRY(omap3_sram_configure_core_dpll_sz) .word . - omap3_sram_configure_core_dpll + diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index 73f483d56ca6..21fb0efdda86 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -228,7 +228,8 @@ extern void omap1_map_common_io(void); extern void omap1_init_common_hw(void); extern void omap2_map_common_io(void); -extern void omap2_init_common_hw(struct omap_sdrc_params *sp); +extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); #define __arch_ioremap(p,s,t) omap_ioremap(p,s,t) #define __arch_iounmap(v) omap_iounmap(v) diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index adc73522491f..0be18e4ff182 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -30,6 +30,10 @@ #define SDRC_ACTIM_CTRL_A_0 0x09c #define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 +#define SDRC_MR_1 0x0B4 +#define SDRC_ACTIM_CTRL_A_1 0x0C4 +#define SDRC_ACTIM_CTRL_B_1 0x0C8 +#define SDRC_RFR_CTRL_1 0x0D4 /* * These values represent the number of memory clock cycles between @@ -102,8 +106,11 @@ struct omap_sdrc_params { u32 mr; }; -void __init omap2_sdrc_init(struct omap_sdrc_params *sp); -struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r); +void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, + struct omap_sdrc_params *sdrc_cs1); +int omap2_sdrc_get_params(unsigned long r, + struct omap_sdrc_params **sdrc_cs0, + struct omap_sdrc_params **sdrc_cs1); #ifdef CONFIG_ARCH_OMAP2 diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index 4d53cc59d7a3..8974e3fc2691 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); -extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); @@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; - -extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, - u32 unlock_dll, u32 f, u32 sdrc_mr, - u32 inc); +extern u32 omap3_sram_configure_core_dpll( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); extern unsigned long omap3_sram_configure_core_dpll_sz; #endif diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea73804d21e..4e781c99f0eb 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, - u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, - u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc); -u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, - u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll, - u32 f, u32 sdrc_mr, u32 inc) +static u32 (*_omap3_sram_configure_core_dpll)( + u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1); + +u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc, + u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0, + u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0, + u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1, + u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1) { BUG_ON(!_omap3_sram_configure_core_dpll); - return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, - sdrc_actim_ctrla, - sdrc_actim_ctrlb, m2, - unlock_dll, f, sdrc_mr, inc); + return _omap3_sram_configure_core_dpll( + m2, unlock_dll, f, inc, + sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0, + sdrc_actim_ctrl_b_0, sdrc_mr_0, + sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1, + sdrc_actim_ctrl_b_1, sdrc_mr_1); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ From 9fb97412c3be5d0d1dd0e9d7c5268469e4c942aa Mon Sep 17 00:00:00 2001 From: Jean Pihet Date: Fri, 24 Jul 2009 19:43:25 -0600 Subject: [PATCH 003/338] OMAP3: Setup MUX settings for SDRC CKE signals This patches ensures the MUX settings are correct for the SDRC CKE signals to SDRAM. This allows the self-refresh to work when 2 chip-selects are in use. A warning is thrown away in case the initial muxing is incorrect, in order to track faulty or old-dated bootloaders. Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options must be enabled for the mux code to have effect. Signed-off-by: Jean Pihet Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/board-omap3beagle.c | 4 ++++ arch/arm/mach-omap2/board-omap3pandora.c | 5 +++++ arch/arm/mach-omap2/board-overo.c | 5 +++++ arch/arm/mach-omap2/board-rx51.c | 4 ++++ arch/arm/mach-omap2/mux.c | 6 ++++++ arch/arm/plat-omap/include/mach/mux.h | 4 ++++ 6 files changed, 28 insertions(+) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 4abefd9566e8..e00ba128cece 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -409,6 +409,10 @@ static void __init omap3_beagle_init(void) usb_musb_init(); omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 9b991ced3822..864ee3d021f7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -398,6 +399,10 @@ static void __init omap3pandora_init(void) omap3pandora_ads7846_init(); pandora_keys_gpio_init(); usb_musb_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 44bc1c54cd03..6b171b338ec0 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include "sdram-micron-mt46h32m32lf-6.h" @@ -396,6 +397,10 @@ static void __init overo_init(void) overo_ads7846_init(); overo_init_smsc911x(); + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); + if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 591ae8a58054..1c9e07fe8266 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -75,6 +75,10 @@ static void __init rx51_init(void) omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 026c4fc883a7..43d6b92b65f2 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) + +/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ +MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) +MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, + OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 85a621705766..80281c458baf 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -853,6 +853,10 @@ enum omap34xx_index { AE5_34XX_GPIO143, H19_34XX_GPIO164_OUT, J25_34XX_GPIO170, + + /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ + H16_34XX_SDRC_CKE0, + H17_34XX_SDRC_CKE1, }; struct omap_mux_cfg { From 75f251e3d0803b028f3474fdc75be0994c377ab5 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Jul 2009 19:44:01 -0600 Subject: [PATCH 004/338] OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot Stop setting SDRC_POWER.PWDENA on boot. There is a nasty erratum (34xx erratum 1.150) that can cause memory corruption if PWDENA is enabled. Based originally on a patch from Samu P. Onkalo . Tested on BeagleBoard rev C2. Signed-off-by: Paul Walmsley Cc: Samu P. Onkalo --- arch/arm/mach-omap2/sdrc.c | 5 ++++- arch/arm/mach-omap2/sram34xx.S | 2 -- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 2e9e38db30e9..9e3bd4fa7810 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -125,8 +125,11 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_init_params_cs1 = sdrc_cs1; /* XXX Enable SRFRONIDLEREQ here also? */ + /* + * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA + * can cause random memory corruption + */ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) | - (1 << SDRC_POWER_PWDENA_SHIFT) | (1 << SDRC_POWER_PAGEPOLICY_SHIFT); sdrc_write_reg(l, SDRC_POWER); } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 3aef7448b2a5..9c2d0465a83c 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -58,7 +58,6 @@ /* SDRC_POWER bit settings */ #define SRFRONIDLEREQ_MASK 0x40 -#define PWDENA_MASK 0x4 /* CM_IDLEST1_CORE bit settings */ #define ST_SDRC_MASK 0x2 @@ -160,7 +159,6 @@ sdram_in_selfrefresh: ldr r12, [r11] @ read the contents of SDRC_POWER mov r9, r12 @ keep a copy of SDRC_POWER bits orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle - bic r12, r12, #PWDENA_MASK @ clear PWDENA str r12, [r11] @ write back to SDRC_POWER register ldr r12, [r11] @ posted-write barrier for SDRC idle_sdrc: From 8ff120e5303e27e03aba7b774e86fd43eaf90376 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 24 Jul 2009 19:44:01 -0600 Subject: [PATCH 005/338] OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83Mhz This patch fixes a bug in the CORE dpll scaling sequence which was errouneously clearing some bits in the SDRC DLLA CTRL register and hence causing a freeze. The issue was observed only on platforms which scale CORE dpll to < 83Mhz and hence program the DLL in fixed delay mode. Issue reported by Limei Wang , with debugging assistance from Richard Woodruff and Girish Ghongdemath . Signed-off-by: Rajendra Nayak Cc: Limei Wang Cc: Richard Woodruff Cc: Girish Ghongdemath Signed-off-by: Paul Walmsley [paul@pwsan.com: updated patch description to include collaboration credits] --- arch/arm/mach-omap2/sram34xx.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 9c2d0465a83c..e6b112590d7d 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -143,7 +143,7 @@ return_to_sdram: unlock_dll: ldr r11, omap3_sdrc_dlla_ctrl ldr r12, [r11] - and r12, r12, #FIXEDDELAY_MASK + bic r12, r12, #FIXEDDELAY_MASK orr r12, r12, #FIXEDDELAY_DEFAULT orr r12, r12, #DLLIDLE_MASK str r12, [r11] @ (no OCP barrier needed) From df56556e571234cf26072cd58c01ac3520986b44 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 24 Jul 2009 19:44:02 -0600 Subject: [PATCH 006/338] OMAP3 SDRC: Move the clk stabilization delay to the right place The clock stabilization delay post a M2 divider change is needed even before a SDRC interface clock re-enable and not only before jumping back to SDRAM. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/sram34xx.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index e6b112590d7d..82aa4a3d160c 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -127,6 +127,8 @@ skip_cs1_params: blne lock_dll bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC bl configure_core_dpll @ change the DPLL3 M2 divider + mov r12, r2 + bl wait_clk_stable @ wait for SDRC to stabilize bl enable_sdrc @ take SDRC out of idle cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change bleq wait_dll_unlock @@ -134,8 +136,6 @@ skip_cs1_params: cmp r3, #1 @ if increasing SDRC clk rate, beq return_to_sdram @ return to SDRAM code, otherwise, bl configure_sdrc @ reprogram SDRC regs now - mov r12, r2 - bl wait_clk_stable @ wait for SDRC to stabilize return_to_sdram: isb @ prevent speculative exec past here mov r0, #0 @ return value From 72350b29a4c0debfc27c2edbeed9b4ff3f935dd4 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Jul 2009 19:44:03 -0600 Subject: [PATCH 007/338] OMAP2/3 clock: split, rename omap2_wait_clock_ready() Some OMAP2/3 hardware modules have CM_IDLEST attributes that are not handled by the current omap2_wait_clock_ready() code. In preparation for patches that fix the unusual devices, rename the function omap2_wait_clock_ready() to omap2_wait_module_ready() and split it into three parts: 1. A clkops-specific companion clock return function (by default, omap2_clk_dflt_find_companion()) 2. A clkops-specific CM_IDLEST register address and bit shift return function (by default, omap2_clk_dflt_find_idlest()) 3. Code to wait for the CM to indicate that the module is ready (omap2_cm_wait_idlest()) Clocks can now specify their own custom find_companion() and find_idlest() functions; used in subsequent patches. Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock.c | 164 ++++++++++++------------ arch/arm/mach-omap2/clock.h | 6 + arch/arm/mach-omap2/prcm.c | 43 +++++++ arch/arm/plat-omap/include/mach/clock.h | 2 + arch/arm/plat-omap/include/mach/prcm.h | 1 + 5 files changed, 135 insertions(+), 81 deletions(-) diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index b0665f161c03..456e2ad5f621 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -38,8 +39,6 @@ #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" -#define MAX_CLOCK_ENABLE_WAIT 100000 - /* DPLL rate rounding: minimum DPLL multiplier, divider values */ #define DPLL_MIN_MULTIPLIER 1 #define DPLL_MIN_DIVIDER 1 @@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk) } /** - * omap2_wait_clock_ready - wait for clock to enable - * @reg: physical address of clock IDLEST register - * @mask: value to mask against to determine if the clock is active - * @name: name of the clock (for printk) + * omap2_clk_dflt_find_companion - find companion clock to @clk + * @clk: struct clk * to find the companion clock of + * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in + * @other_bit: u8 ** to return the companion clock bit shift in * - * Returns 1 if the clock enabled in time, or 0 if it failed to enable - * in roughly MAX_CLOCK_ENABLE_WAIT microseconds. - */ -int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name) -{ - int i = 0; - int ena = 0; - - /* - * 24xx uses 0 to indicate not ready, and 1 to indicate ready. - * 34xx reverses this, just to keep us on our toes - */ - if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) - ena = mask; - else if (cpu_mask & RATE_IN_343X) - ena = 0; - - /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_CLOCK_ENABLE_WAIT)) { - udelay(1); - } - - if (i <= MAX_CLOCK_ENABLE_WAIT) - pr_debug("Clock %s stable after %d loops\n", name, i); - else - printk(KERN_ERR "Clock %s didn't enable in %d tries\n", - name, MAX_CLOCK_ENABLE_WAIT); - - - return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0; -}; - - -/* - * Note: We don't need special code here for INVERT_ENABLE - * for the time being since INVERT_ENABLE only applies to clocks enabled by + * Note: We don't need special code here for INVERT_ENABLE for the + * time being since INVERT_ENABLE only applies to clocks enabled by * CM_CLKEN_PLL + * + * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's + * just a matter of XORing the bits. + * + * Some clocks don't have companion clocks. For example, modules with + * only an interface clock (such as MAILBOXES) don't have a companion + * clock. Right now, this code relies on the hardware exporting a bit + * in the correct companion register that indicates that the + * nonexistent 'companion clock' is active. Future patches will + * associate this type of code with per-module data structures to + * avoid this issue, and remove the casts. No return value. */ -static void omap2_clk_wait_ready(struct clk *clk) +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit) { - void __iomem *reg, *other_reg, *st_reg; - u32 bit; - - /* - * REVISIT: This code is pretty ugly. It would be nice to generalize - * it and pull it into struct clk itself somehow. - */ - reg = clk->enable_reg; + u32 r; /* * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes * it's just a matter of XORing the bits. */ - other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN)); + r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN)); - /* Check if both functional and interface clocks - * are running. */ - bit = 1 << clk->enable_bit; - if (!(__raw_readl(other_reg) & bit)) - return; - st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */ - - omap2_wait_clock_ready(st_reg, bit, clk->name); + *other_reg = (__force void __iomem *)r; + *other_bit = clk->enable_bit; } -static int omap2_dflt_clk_enable(struct clk *clk) +/** + * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk + * @clk: struct clk * to find IDLEST info for + * @idlest_reg: void __iomem ** to return the CM_IDLEST va in + * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in + * + * Return the CM_IDLEST register address and bit shift corresponding + * to the module that "owns" this clock. This default code assumes + * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that + * the IDLEST register address ID corresponds to the CM_*CLKEN + * register address ID (e.g., that CM_FCLKEN2 corresponds to + * CM_IDLEST2). This is not true for all modules. No return value. + */ +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = clk->enable_bit; +} + +/** + * omap2_module_wait_ready - wait for an OMAP module to leave IDLE + * @clk: struct clk * belonging to the module + * + * If the necessary clocks for the OMAP hardware IP block that + * corresponds to clock @clk are enabled, then wait for the module to + * indicate readiness (i.e., to leave IDLE). This code does not + * belong in the clock code and will be moved in the medium term to + * module-dependent code. No return value. + */ +static void omap2_module_wait_ready(struct clk *clk) +{ + void __iomem *companion_reg, *idlest_reg; + u8 other_bit, idlest_bit; + + /* Not all modules have multiple clocks that their IDLEST depends on */ + if (clk->ops->find_companion) { + clk->ops->find_companion(clk, &companion_reg, &other_bit); + if (!(__raw_readl(companion_reg) & (1 << other_bit))) + return; + } + + clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit); + + omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name); +} + +int omap2_dflt_clk_enable(struct clk *clk) { u32 v; if (unlikely(clk->enable_reg == NULL)) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", + pr_err("clock.c: Enable for %s without enable code\n", clk->name); return 0; /* REVISIT: -EINVAL */ } @@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk) __raw_writel(v, clk->enable_reg); v = __raw_readl(clk->enable_reg); /* OCP barrier */ + if (clk->ops->find_idlest) + omap2_module_wait_ready(clk); + return 0; } -static int omap2_dflt_clk_enable_wait(struct clk *clk) -{ - int ret; - - if (!clk->enable_reg) { - printk(KERN_ERR "clock.c: Enable for %s without enable code\n", - clk->name); - return 0; /* REVISIT: -EINVAL */ - } - - ret = omap2_dflt_clk_enable(clk); - if (ret == 0) - omap2_clk_wait_ready(clk); - return ret; -} - -static void omap2_dflt_clk_disable(struct clk *clk) +void omap2_dflt_clk_disable(struct clk *clk) { u32 v; @@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk) } const struct clkops clkops_omap2_dflt_wait = { - .enable = omap2_dflt_clk_enable_wait, + .enable = omap2_dflt_clk_enable, .disable = omap2_dflt_clk_disable, + .find_companion = omap2_clk_dflt_find_companion, + .find_idlest = omap2_clk_dflt_find_idlest, }; const struct clkops clkops_omap2_dflt = { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 2679ddfa6424..9ae7540f8af2 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); +int omap2_dflt_clk_enable(struct clk *clk); +void omap2_dflt_clk_disable(struct clk *clk); +void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, + u8 *other_bit); +void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, + u8 *idlest_bit); extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index f945156d5585..ced555a4cd1a 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -28,6 +29,8 @@ static void __iomem *prm_base; static void __iomem *cm_base; +#define MAX_MODULE_ENABLE_WAIT 100000 + u32 omap_prcm_get_reset_sources(void) { /* XXX This presumably needs modification for 34XX */ @@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) } EXPORT_SYMBOL(cm_rmw_mod_reg_bits); +/** + * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness + * @reg: physical address of module IDLEST register + * @mask: value to mask against to determine if the module is active + * @name: name of the clock (for printk) + * + * Returns 1 if the module indicated readiness in time, or 0 if it + * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds. + */ +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) +{ + int i = 0; + int ena = 0; + + /* + * 24xx uses 0 to indicate not ready, and 1 to indicate ready. + * 34xx reverses this, just to keep us on our toes + */ + if (cpu_is_omap24xx()) + ena = mask; + else if (cpu_is_omap34xx()) + ena = 0; + else + BUG(); + + /* Wait for lock */ + while (((__raw_readl(reg) & mask) != ena) && + (i++ < MAX_MODULE_ENABLE_WAIT)) + udelay(1); + + if (i < MAX_MODULE_ENABLE_WAIT) + pr_debug("cm: Module associated with clock %s ready after %d " + "loops\n", name, i); + else + pr_err("cm: Module associated with clock %s didn't enable in " + "%d tries\n", name, MAX_MODULE_ENABLE_WAIT); + + return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0; +}; + void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h index f9f65e1ba3f1..4b8b0d65cbf2 100644 --- a/arch/arm/plat-omap/include/mach/clock.h +++ b/arch/arm/plat-omap/include/mach/clock.h @@ -20,6 +20,8 @@ struct clockdomain; struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); + void (*find_idlest)(struct clk *, void __iomem **, u8 *); + void (*find_companion)(struct clk *, void __iomem **, u8 *); }; #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h index 24ac3c715912..cda2a70397b4 100644 --- a/arch/arm/plat-omap/include/mach/prcm.h +++ b/arch/arm/plat-omap/include/mach/prcm.h @@ -25,6 +25,7 @@ u32 omap_prcm_get_reset_sources(void); void omap_prcm_arch_reset(char mode); +int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name); #endif From 3dc2197579089c5b74c7fba666c8ccf1a449afb4 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Jul 2009 19:44:04 -0600 Subject: [PATCH 008/338] OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE [1]. Fix by implementing a custom clkops .find_idlest function to return the correct slave IDLEST register. ... 1. OMAP2430 Multimedia Device Package-on-Package (POP) Silicon Revision 2.1 (Rev. V) Technical Reference Manual, tables 4-99 and 4-105. Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock24xx.c | 37 +++++++++++++++++++++++++++++++-- arch/arm/mach-omap2/clock24xx.h | 4 ++-- 2 files changed, 37 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index 44de0271fc2f..bc5d3ac66611 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -43,6 +44,18 @@ static const struct clkops clkops_oscck; static const struct clkops clkops_fixed; +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +/* 2430 I2CHS has non-standard IDLEST register */ +static const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock24xx.h" struct omap_clk { @@ -239,6 +252,26 @@ static void __iomem *prcm_clksrc_ctrl; * Omap24xx specific clock functions *-------------------------------------------------------------------------*/ +/** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + + /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") @@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk) else if (clk == &apll54_ck) cval = OMAP24XX_ST_54M_APLL; - omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, + clk->name); /* * REVISIT: Should we return an error code if omap2_wait_clock_ready() diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h index 458f00cdcbea..d19cf7a7d8db 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock24xx.h @@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = { static struct clk i2chs2_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 2, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", @@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = { static struct clk i2chs1_fck = { .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2430_i2chs_wait, .id = 1, .parent = &func_96m_ck, .clkdm_name = "core_l4_clkdm", From 3c82e229f09a6acc8d24dc27c5e0e60b1d7161c2 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 24 Jul 2009 19:44:06 -0600 Subject: [PATCH 009/338] OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB Fix two bugs in the OMAP3 clock tree pertaining to the SSI, DSS, USBHOST, and HSOTGUSB devices. These devices are both interconnect initiators and targets. Without this patch, clk_enable()s on clocks for these modules can be very high latency (potentially up to ~200 milliseconds) and message such as the following are generated: Clock usbhost_48m_fck didn't enable in 100000 tries Two bugs are fixed by this patch. First, OMAP hardware only supports target CM_IDLEST register bits on ES2+ chips and beyond. ES1 chips should not wait for these clocks to enable. So, split the appropriate clocks into ES1 and ES2+ variants, so that kernels running on ES1 devices won't try to wait. Second, the current heuristic in omap2_clk_dflt_find_idlest() will fail for these clocks. It assumes that the CM_IDLEST bit to wait upon is the same as the CM_*CLKEN bit, which is false[1]. Fix by implementing custom clkops .find_idlest function pointers for the appropriate clocks that return the correct slave IDLEST bit shift. This was originally fixed in the linux-omap kernel during 2.6.29 in a slightly different manner[2][3]. In the medium-term future, all of the module IDLEST code will eventually be moved to the omap_hwmod code. Problem reported by Jarkko Nikula : http://marc.info/?l=linux-omap&m=124306184903679&w=2 ... 1. See for example 34xx TRM Revision P Table 4-213 and 4-217 (for the DSS case). 2. http://www.spinics.net/lists/linux-omap/msg05512.html et seq. 3. http://lkml.indiana.edu/hypermail/linux/kernel/0901.3/01498.html Signed-off-by: Paul Walmsley Cc: Jarkko Nikula --- arch/arm/mach-omap2/clock34xx.c | 118 ++++++++++++++++++++++++++++++-- arch/arm/mach-omap2/clock34xx.h | 85 ++++++++++++++++++++--- 2 files changed, 185 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 1c6480d3ad62..cd7819cc0c9e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -2,7 +2,7 @@ * OMAP3-specific clock framework functions * * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * Testing and integration fixes by Jouni Högander @@ -41,6 +41,37 @@ static const struct clkops clkops_noncore_dpll_ops; +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit); + +static const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + #include "clock34xx.h" struct omap_clk { @@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), @@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick, CK_343X), + CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), @@ -300,6 +337,73 @@ static struct omap_clk omap34xx_clks[] = { */ #define SDRC_MPURATE_LOOPS 96 +/** + * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift + * from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * Some OMAP modules on OMAP3 ES2+ chips have both initiator and + * target IDLEST bits. For our purposes, we are concerned with the + * target IDLEST bits, which exist at a different bit position than + * the *CLKEN bit position for these modules (DSS and USBHOST) (The + * default find_idlest code assumes that they are at the same + * position.) No return value. + */ +static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + /* USBHOST_IDLE has same shift */ + *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; +} + +/** + * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different + * shift from the CM_{I,F}CLKEN bit. Pass back the correct info via + * @idlest_reg and @idlest_bit. No return value. + */ +static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + u32 r; + + r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20); + *idlest_reg = (__force void __iomem *)r; + *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; +} + /** * omap3_dpll_recalc - recalculate DPLL rate * @clk: DPLL struct clk diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index e433aec4efdd..57cc2725b923 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = { { .parent = NULL } }; -static struct clk ssi_ssr_fck = { +static struct clk ssi_ssr_fck_3430es1 = { .name = "ssi_ssr_fck", .ops = &clkops_omap2_dflt, .init = &omap2_init_clksel_parent, @@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = { .recalc = &omap2_clksel_recalc, }; -static struct clk ssi_sst_fck = { +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { .name = "ssi_sst_fck", .ops = &clkops_null, - .parent = &ssi_ssr_fck, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, .fixed_div = 2, .recalc = &omap2_fixed_divisor_recalc, }; @@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = { .recalc = &followparent_recalc, }; -static struct clk hsotgusb_ick = { +static struct clk hsotgusb_ick_3430es1 = { .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, .parent = &core_l3_ick, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, @@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = { .recalc = &followparent_recalc, }; -static struct clk ssi_ick = { +static struct clk ssi_ick_3430es1 = { .name = "ssi_ick", .ops = &clkops_omap2_dflt, .parent = &ssi_l4_ick, @@ -1957,6 +1988,16 @@ static struct clk ssi_ick = { .recalc = &followparent_recalc, }; +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + /* REVISIT: Technically the TRM claims that this is CORE_CLK based, * but l4_ick makes more sense to me */ @@ -2024,7 +2065,7 @@ static struct clk des1_ick = { }; /* DSS */ -static struct clk dss1_alwon_fck = { +static struct clk dss1_alwon_fck_3430es1 = { .name = "dss1_alwon_fck", .ops = &clkops_omap2_dflt, .parent = &dpll4_m4x2_ck, @@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = { .recalc = &followparent_recalc, }; +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + static struct clk dss_tv_fck = { .name = "dss_tv_fck", .ops = &clkops_omap2_dflt, @@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = { .recalc = &followparent_recalc, }; -static struct clk dss_ick = { +static struct clk dss_ick_3430es1 = { /* Handles both L3 and L4 clocks */ .name = "dss_ick", .ops = &clkops_omap2_dflt, @@ -2079,6 +2130,18 @@ static struct clk dss_ick = { .recalc = &followparent_recalc, }; +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .init = &omap2_init_clk_clkdm, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + /* CAM */ static struct clk cam_mclk = { @@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = { static struct clk usbhost_120m_fck = { .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &dpll5_m2_ck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = { static struct clk usbhost_48m_fck = { .name = "usbhost_48m_fck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &omap_48m_fck, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), @@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = { static struct clk usbhost_ick = { /* Handles both L3 and L4 clocks */ .name = "usbhost_ick", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap3430es2_dss_usbhost_wait, .parent = &l4_ick, .init = &omap2_init_clk_clkdm, .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), From 505d62d073b528859b43bfb463a6ceaf3581469e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 26 Jul 2009 14:57:54 +0200 Subject: [PATCH 010/338] avr32/lib: fix unaligned memcpy() memcpy(p, unaligned, 4..) returns (p + num_of_unaligned_by_copied) instead of p because p is not preserved in the unaligned case. Noticed by Herbert Xu's superior parameter recycling coding technique which let the md4 self-test fail on avr32. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Haavard Skinnemoen --- arch/avr32/lib/memcpy.S | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S index 0abb26142b64..93e74b6fcdb6 100644 --- a/arch/avr32/lib/memcpy.S +++ b/arch/avr32/lib/memcpy.S @@ -24,8 +24,8 @@ memcpy: brne 1f /* At this point, "from" is word-aligned */ -2: sub r10, 4 - mov r9, r12 +2: mov r9, r12 +5: sub r10, 4 brlt 4f 3: ld.w r8, r11++ @@ -59,4 +59,13 @@ memcpy: st.b r12++, r8 ld.ub r8, r11++ st.b r12++, r8 - rjmp 2b + mov r8, r12 + add pc, pc, r9 + sub r8, 1 + nop + sub r8, 1 + nop + sub r8, 1 + nop + mov r9, r8 + rjmp 5b From 251ab1a37d9ba810593d5fbf2482bc4ba773fab2 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 26 Jul 2009 14:58:34 +0200 Subject: [PATCH 011/338] avr32/lib: fix unaligned memcpy where len < 4 in case of memcpy(p, unaligned, 1..3) we get 1..3 as the return value instead of p Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Haavard Skinnemoen --- arch/avr32/lib/memcpy.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/avr32/lib/memcpy.S b/arch/avr32/lib/memcpy.S index 93e74b6fcdb6..c2ca49d705af 100644 --- a/arch/avr32/lib/memcpy.S +++ b/arch/avr32/lib/memcpy.S @@ -49,6 +49,7 @@ memcpy: /* Handle unaligned "from" pointer */ 1: sub r10, 4 + movlt r9, r12 brlt 4b add r10, r9 lsl r9, 2 From 92c548cd35d50df398f442b07021150094578460 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Mon, 20 Apr 2009 12:36:53 +1000 Subject: [PATCH 012/338] favr32: improve touchscreen response The ezLCD+101 board (to which an favr-32 is fitted) has a long, unshielded, nasty lead between the touch panel and the ads7843 touch controller. In order to get satisfactory response then, we need to employ every noise-reduction trick in the driver's arsenal. After extensive fiddling I've found some good settings: 1) We keep vref on all the time to dramatically reduce settling times (at the cost of a tiny increase in power consumption). 2) Despite 1 the settling time is still non-zero. 500uS is plenty of time for the signals to settle 3) Despite 1 and 2 there's still a little bit of noise around. By setting a pen recheck delay we make the panel feel less touchy and twitchy. Someone with more time and patience myself might be able to tune this numbers further but these settings are now perfectly acceptable for normal use. Tested on ezLCD+101 though should only improve response on other ezLCD+/ favr-32 boards too. Signed-off-by: Ben Nizette Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/favr-32/setup.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 46c9b0a224cf..75f19f47fb2f 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c @@ -72,6 +72,10 @@ static struct ads7846_platform_data ads7843_data = { .debounce_max = 20, .debounce_rep = 4, .debounce_tol = 5, + + .keep_vref_on = true, + .settle_delay_usecs = 500, + .penirq_recheck_delay_usecs = 100, }; static struct spi_board_info __initdata spi1_board_info[] = { From 9a926d86b29a25456f1dd8c9df938e151b1c3978 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 27 Jul 2009 18:10:28 -0700 Subject: [PATCH 013/338] sparc64: Sign extend length arg to truncate syscalls when compat. The first thing sys_truncate() and sys_ftruncate() do is sign extend the unsigned length arg to a signed type. Thanks to Benjamin Herrenschmidt for the tip. Signed-off-by: David S. Miller --- arch/sparc/kernel/sys32.S | 2 ++ arch/sparc/kernel/systbls_64.S | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index f061c4dda9ef..577f8fab8b6b 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -138,6 +138,8 @@ SIGN2(sys32_splice, sys_splice, %o0, %o1) SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5) SIGN2(sys32_tee, sys_tee, %o0, %o1) SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0) +SIGN1(sys32_truncate, sys_truncate, %o1) +SIGN1(sys32_ftruncate, sys_ftruncate, %o1) .globl sys32_mmap2 sys32_mmap2: diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 6b3ee88e253c..2ee7250ba7ae 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -43,8 +43,8 @@ sys_call_table32: /*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall .word sys32_getgroups, compat_sys_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd /*120*/ .word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod - .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate -/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall + .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys32_truncate +/*130*/ .word sys32_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall .word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit .word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write From ff46a474ca2566d79e8d7454442b56d82bce37c1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 31 Jul 2009 15:42:09 +0200 Subject: [PATCH 014/338] mx3: Fix double pin allocation in pcm037_eet.c SPI pins are now allocated in pcm037.c, remove them from EET. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/pcm037_eet.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c index fe52fb1bb8b7..8d386000fc40 100644 --- a/arch/arm/mach-mx3/pcm037_eet.c +++ b/arch/arm/mach-mx3/pcm037_eet.c @@ -24,15 +24,6 @@ #include "devices.h" static unsigned int pcm037_eet_pins[] = { - /* SPI #1 */ - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS0__SS0, - MX31_PIN_CSPI1_SS1__SS1, - MX31_PIN_CSPI1_SS2__SS2, - /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */ IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO), /* GPIO keys */ From a923c28fc538a4161b15e9b5d7d48248d73d3e6f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 2 Aug 2009 19:17:15 -0700 Subject: [PATCH 015/338] sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM. As noted by Nick Piggin. Signed-off-by: David S. Miller --- arch/sparc/mm/fault_32.c | 7 ++++--- arch/sparc/mm/fault_64.c | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c index a5e30c642ee3..b99f81c4906f 100644 --- a/arch/sparc/mm/fault_32.c +++ b/arch/sparc/mm/fault_32.c @@ -319,9 +319,10 @@ no_context: */ out_of_memory: up_read(&mm->mmap_sem); - printk("VM: killing process %s\n", tsk->comm); - if (from_user) - do_group_exit(SIGKILL); + if (from_user) { + pagefault_out_of_memory(); + return; + } goto no_context; do_sigbus: diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index e5620b27c8bf..43b0da96a4fb 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -447,9 +447,10 @@ handle_kernel_fault: out_of_memory: insn = get_fault_insn(regs, insn); up_read(&mm->mmap_sem); - printk("VM: killing process %s\n", current->comm); - if (!(regs->tstate & TSTATE_PRIV)) - do_group_exit(SIGKILL); + if (!(regs->tstate & TSTATE_PRIV)) { + pagefault_out_of_memory(); + return; + } goto handle_kernel_fault; intr_or_no_mm: From b37c45b8c27c049dc44673e40fd63820fd9a9d91 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Wed, 5 Aug 2009 16:53:24 +0300 Subject: [PATCH 016/338] OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOs gpio_get() should return DATAIN register value when the GPIO is configured as input whereas it should return DATAOUT register value when the GPIO is configured as output. Now /sys/kernel/debug/gpio shows proper values for output GPIOs Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 121 ++++++++++++++++++++++++++++---------- 1 file changed, 89 insertions(+), 32 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c12423..9c16ca8d293c 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) __raw_writel(l, reg); } -static int __omap_get_gpio_datain(int gpio) +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) { - struct gpio_bank *bank; void __iomem *reg; if (check_gpio(gpio) < 0) return -EINVAL; - bank = get_gpio_bank(gpio); reg = bank->base; switch (bank->method) { #ifdef CONFIG_ARCH_OMAP1 @@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio) & (1 << get_gpio_index(gpio))) != 0; } +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP730 + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP850 + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ + defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + #define MOD_REG_BIT(reg, bit_mask, set) \ do { \ int l = __raw_readl(base + reg); \ @@ -1350,9 +1395,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset) return 0; } +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_730: + reg += OMAP730_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_850: + reg += OMAP850_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + } + return __raw_readl(reg) & mask; +} + static int gpio_get(struct gpio_chip *chip, unsigned offset) { - return __omap_get_gpio_datain(chip->base + offset); + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); } static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) @@ -1886,34 +1971,6 @@ arch_initcall(omap_gpio_sysinit); #include #include -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - } - return __raw_readl(reg) & mask; -} - - static int dbg_gpio_show(struct seq_file *s, void *unused) { unsigned i, j, gpio; From 7cc515f74d2871daff106a17714bfd16bcb045ca Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 10 Jun 2009 09:02:25 -0700 Subject: [PATCH 017/338] OMAP2/3: PM: make PM __init calls static Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm.h | 3 --- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- 3 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index f7b3baf76678..21201cd4117b 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -11,9 +11,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_PM_H #define __ARCH_ARM_MACH_OMAP2_PM_H -extern int omap2_pm_init(void); -extern int omap3_pm_init(void); - #ifdef CONFIG_PM_DEBUG extern void omap2_pm_dump(int mode, int resume, unsigned int us); extern int omap2_pm_debug; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index db1025562fb0..528dbdc26e23 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void) WKUP_MOD, PM_WKEN); } -int __init omap2_pm_init(void) +static int __init omap2_pm_init(void) { u32 l; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 841d4c5ed8be..765cdc0cd7a8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,7 +652,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm) return 0; } -int __init omap3_pm_init(void) +static int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; int ret; From 364dd47466ff7a7749bf037df4bf3b7aedbfe6f4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 9 Jun 2009 11:45:30 -0700 Subject: [PATCH 018/338] OMAP3: PM: CM_REGADDR macros using wrong name Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/cm.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index 1d3c93bf86d3..f3c91a1ca391 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -29,9 +29,9 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) +#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) +#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) From 3a6667acf916b3e32be4682196882fc2ed0ec23e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 07:50:23 -0700 Subject: [PATCH 019/338] OMAP3: PM: Ensure PRCM interrupts are cleared at boot Any pending PRCM interrupts can prevent retention. Ensure they are cleared during boot. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 765cdc0cd7a8..cc83dfc39a8b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,9 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending PRCM interrupts */ + prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + omap3_iva_idle(); omap3_d2d_idle(); } From 3a07ae30a0bfa93ff2b242acf670c6d8e2de35de Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 16:14:54 -0700 Subject: [PATCH 020/338] OMAP3: PM: Clear pending PRCM reset flags on init Any pending reset flags can prevent retention. Ensure they are all cleared during boot. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index cc83dfc39a8b..1422e931f57f 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,15 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Clear any pending 'reset' flags */ + prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST); + prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST); + /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); From 040fed059c34da5115790609f1a038fc9aec88d1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 May 2009 16:34:25 -0700 Subject: [PATCH 021/338] OMAP3: PM: prevent module wakeups from waking IVA2 By default, prevent functional wakeups from inside a module from waking up the IVA2. Let DSP Bridge code handle this when loaded. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 1422e931f57f..c813a081c3c8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -613,6 +613,12 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + /* Don't attach IVA interrupts */ + prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL); + prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1); + prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3); + prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL); + /* Clear any pending 'reset' flags */ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST); prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST); From 10f90ed2d727c0f344d910c02c9726d0481d9b00 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Jun 2009 11:39:18 -0700 Subject: [PATCH 022/338] OMAP3: PM: Do not build suspend code if SUSPEND is not enabled Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c813a081c3c8..528f725722a2 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,7 +39,9 @@ struct power_state { struct powerdomain *pwrdm; u32 next_state; +#ifdef CONFIG_SUSPEND u32 saved_state; +#endif struct list_head node; }; @@ -293,6 +295,7 @@ out: local_irq_enable(); } +#ifdef CONFIG_SUSPEND static int omap3_pm_prepare(void) { disable_hlt(); @@ -366,6 +369,7 @@ static struct platform_suspend_ops omap_pm_ops = { .finish = omap3_pm_finish, .valid = suspend_valid_only_mem, }; +#endif /* CONFIG_SUSPEND */ /** @@ -710,7 +714,9 @@ static int __init omap3_pm_init(void) _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, omap34xx_cpu_suspend_sz); +#ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); +#endif /* CONFIG_SUSPEND */ pm_idle = omap3_pm_idle; From 4789998a30d845d94a7595076d1392ffd5a9d39e Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 24 Jun 2009 10:32:03 -0700 Subject: [PATCH 023/338] OMAP4: UART: cleanup special case IRQ handling Streamline the OMAP4 special IRQ assignments by putting inside normal init loop instead of having a separate loop. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index b094c15bfe47..c82ec95cd79e 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -496,10 +496,6 @@ void __init omap_serial_init(void) if (info == NULL) return; - if (cpu_is_omap44xx()) { - for (i = 0; i < OMAP_MAX_NR_PORTS; i++) - serial_platform_data[i].irq += 32; - } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { struct plat_serial8250_port *p = serial_platform_data + i; @@ -533,6 +529,9 @@ void __init omap_serial_init(void) uart->p = p; list_add(&uart->node, &uart_list); + if (cpu_is_omap44xx()) + p->irq += 32; + omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); From 2466211e5debd205fc550d871fe0ab9b9a6d02ed Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 5 Mar 2009 16:32:23 +0200 Subject: [PATCH 024/338] OMAP3: Fixed crash bug with serial + suspend It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 23 +++++++++++++++++++++-- arch/arm/mach-omap2/serial.c | 14 ++++++++++++++ arch/arm/plat-omap/include/mach/serial.h | 1 + 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 528f725722a2..b07efb26de18 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -296,6 +296,8 @@ out: } #ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state; + static int omap3_pm_prepare(void) { disable_hlt(); @@ -342,11 +344,11 @@ restore: return ret; } -static int omap3_pm_enter(suspend_state_t state) +static int omap3_pm_enter(suspend_state_t unused) { int ret = 0; - switch (state) { + switch (suspend_state) { case PM_SUSPEND_STANDBY: case PM_SUSPEND_MEM: ret = omap3_pm_suspend(); @@ -363,7 +365,24 @@ static void omap3_pm_finish(void) enable_hlt(); } +/* Hooks to enable / disable UART interrupts during suspend */ +static int omap3_pm_begin(suspend_state_t state) +{ + suspend_state = state; + omap_uart_enable_irqs(0); + return 0; +} + +static void omap3_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; + omap_uart_enable_irqs(1); + return; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap3_pm_begin, + .end = omap3_pm_end, .prepare = omap3_pm_prepare, .enter = omap3_pm_enter, .finish = omap3_pm_finish, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c82ec95cd79e..5352d05b42d6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -435,6 +435,20 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) WARN_ON(ret); } +void omap_uart_enable_irqs(int enable) +{ + int ret; + struct omap_uart_state *uart; + + list_for_each_entry(uart, &uart_list, node) { + if (enable) + ret = request_irq(uart->p->irq, omap_uart_interrupt, + IRQF_SHARED, "serial idle", (void *)uart); + else + free_irq(uart->p->irq, (void *)uart); + } +} + static ssize_t sleep_timeout_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h index 13abd02d1527..def0529c75eb 100644 --- a/arch/arm/plat-omap/include/mach/serial.h +++ b/arch/arm/plat-omap/include/mach/serial.h @@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); extern void omap_uart_prepare_idle(int num); extern void omap_uart_resume_idle(int num); +extern void omap_uart_enable_irqs(int enable); #endif #endif From fd455ea899b5a14a8cdd276e15f3b47696526f92 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 27 Apr 2009 12:27:36 -0700 Subject: [PATCH 025/338] OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial ports This patch causes the OMAP uarts to honor the sysfs power/wakeup file for IOPAD wakeups. Before the OMAP was always woken up from off mode on a rs232 signal change. This patch also creates a different platform device for each serial port so that the wakeup properties can be control per port. By default, IOPAD wakeups are enabled for each UART. To disable, # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup Where serial8250.0 can be replaced by .1, or .2 to control the other ports. Original idea and original patch from Russ Dill Cc: Russ Dill Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 174 +++++++++++++++++++++++------------ 1 file changed, 116 insertions(+), 58 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5352d05b42d6..6f35a7e4893f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -54,6 +54,7 @@ struct omap_uart_state { struct plat_serial8250_port *p; struct list_head node; + struct platform_device pdev; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) int context_valid; @@ -68,10 +69,9 @@ struct omap_uart_state { #endif }; -static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS]; static LIST_HEAD(uart_list); -static struct plat_serial8250_port serial_platform_data[] = { +static struct plat_serial8250_port serial_platform_data0[] = { { .membase = IO_ADDRESS(OMAP_UART1_BASE), .mapbase = OMAP_UART1_BASE, @@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data1[] = { + { .membase = IO_ADDRESS(OMAP_UART2_BASE), .mapbase = OMAP_UART2_BASE, .irq = 73, @@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { + .flags = 0 + } +}; + +static struct plat_serial8250_port serial_platform_data2[] = { + { .membase = IO_ADDRESS(OMAP_UART3_BASE), .mapbase = OMAP_UART3_BASE, .irq = 74, @@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart) clk_disable(uart->fck); } +static void omap_uart_enable_wakeup(struct omap_uart_state *uart) +{ + /* Set wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v |= uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are set */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v |= OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + +static void omap_uart_disable_wakeup(struct omap_uart_state *uart) +{ + /* Clear wake-enable bit */ + if (uart->wk_en && uart->wk_mask) { + u32 v = __raw_readl(uart->wk_en); + v &= ~uart->wk_mask; + __raw_writel(v, uart->wk_en); + } + + /* Ensure IOPAD wake-enables are cleared */ + if (cpu_is_omap34xx() && uart->padconf) { + u16 v = omap_ctrl_readw(uart->padconf); + v &= ~OMAP3_PADCONF_WAKEUPENABLE0; + omap_ctrl_writew(v, uart->padconf); + } +} + static void omap_uart_smart_idle_enable(struct omap_uart_state *uart, int enable) { @@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart) static void omap_uart_allow_sleep(struct omap_uart_state *uart) { + if (device_may_wakeup(&uart->pdev.dev)) + omap_uart_enable_wakeup(uart); + else + omap_uart_disable_wakeup(uart); + if (!uart->clocked) return; @@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num) /* Check for normal UART wakeup */ if (__raw_readl(uart->wk_st) & uart->wk_mask) omap_uart_block_sleep(uart); - return; } } @@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id) return IRQ_NONE; } -static u32 sleep_timeout = DEFAULT_TIMEOUT; - static void omap_uart_idle_init(struct omap_uart_state *uart) { - u32 v; struct plat_serial8250_port *p = uart->p; int ret; uart->can_sleep = 0; - uart->timeout = sleep_timeout; + uart->timeout = DEFAULT_TIMEOUT; setup_timer(&uart->timer, omap_uart_idle_timer, (unsigned long) uart); mod_timer(&uart->timer, jiffies + uart->timeout); @@ -413,22 +460,6 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) uart->padconf = 0; } - /* Set wake-enable bit */ - if (uart->wk_en && uart->wk_mask) { - v = __raw_readl(uart->wk_en); - v |= uart->wk_mask; - __raw_writel(v, uart->wk_en); - } - - /* Ensure IOPAD wake-enables are set */ - if (cpu_is_omap34xx() && uart->padconf) { - u16 v; - - v = omap_ctrl_readw(uart->padconf); - v |= OMAP3_PADCONF_WAKEUPENABLE0; - omap_ctrl_writew(v, uart->padconf); - } - p->flags |= UPF_SHARE_IRQ; ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED, "serial idle", (void *)uart); @@ -449,54 +480,81 @@ void omap_uart_enable_irqs(int enable) } } -static ssize_t sleep_timeout_show(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) { - return sprintf(buf, "%u\n", sleep_timeout / HZ); + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); + + return sprintf(buf, "%u\n", uart->timeout / HZ); } -static ssize_t sleep_timeout_store(struct kobject *kobj, - struct kobj_attribute *attr, +static ssize_t sleep_timeout_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t n) { - struct omap_uart_state *uart; + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); + struct omap_uart_state *uart = container_of(pdev, + struct omap_uart_state, pdev); unsigned int value; if (sscanf(buf, "%u", &value) != 1) { printk(KERN_ERR "sleep_timeout_store: Invalid value\n"); return -EINVAL; } - sleep_timeout = value * HZ; - list_for_each_entry(uart, &uart_list, node) { - uart->timeout = sleep_timeout; - if (uart->timeout) - mod_timer(&uart->timer, jiffies + uart->timeout); - else - /* A zero value means disable timeout feature */ - omap_uart_block_sleep(uart); - } + + uart->timeout = value * HZ; + if (uart->timeout) + mod_timer(&uart->timer, jiffies + uart->timeout); + else + /* A zero value means disable timeout feature */ + omap_uart_block_sleep(uart); + return n; } -static struct kobj_attribute sleep_timeout_attr = - __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); - +DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store); +#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr)) #else static inline void omap_uart_idle_init(struct omap_uart_state *uart) {} +#define DEV_CREATE_FILE(dev, attr) #endif /* CONFIG_PM */ -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, +static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = { + { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data0, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = serial_platform_data1, + }, + }, + }, { + .pdev = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = serial_platform_data2, + }, + }, }, }; void __init omap_serial_init(void) { - int i, err; + int i; const struct omap_uart_config *info; char name[16]; @@ -512,8 +570,10 @@ void __init omap_serial_init(void) return; for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; struct omap_uart_state *uart = &omap_uart[i]; + struct platform_device *pdev = &uart->pdev; + struct device *dev = &pdev->dev; + struct plat_serial8250_port *p = dev->platform_data; if (!(info->enabled_uarts & (1 << i))) { p->membase = NULL; @@ -549,15 +609,13 @@ void __init omap_serial_init(void) omap_uart_enable_clocks(uart); omap_uart_reset(uart); omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + continue; + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); + } } - - err = platform_device_register(&serial_device); - -#ifdef CONFIG_PM - if (!err) - err = sysfs_create_file(&serial_device.dev.kobj, - &sleep_timeout_attr.attr); -#endif - } - From bcf396c48012a5e4c7ab77be5c40df10d6bdb8ad Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 30 Jun 2009 21:02:45 -0700 Subject: [PATCH 026/338] OMAP2/3/4: UART: allow in-order port traversal Use list_add_tail() when adding discovered UART ports. This is so traversal using list_for_each_entry() will traverse the list in the order they were found. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 6f35a7e4893f..a7421a50410b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -601,7 +601,7 @@ void __init omap_serial_init(void) uart->num = i; p->private_data = uart; uart->p = p; - list_add(&uart->node, &uart_list); + list_add_tail(&uart->node, &uart_list); if (cpu_is_omap44xx()) p->irq += 32; From 60c45ae1107c4ec47d2c84e5984ea59d02b2863d Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Tue, 23 Jun 2009 12:53:29 +0300 Subject: [PATCH 027/338] OMAP: PM: CPUfreq: obey min/max settings of policy Use the min/max settings from CPUfreq policy rather than processor defined min/max settings. Without this patch, it's possible to scale frequency outside the current policy range. Signed-off-by: Eero Nurkkala Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/cpu-omap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 843e8af64066..1868c0d8f9b5 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy, /* Ensure desired rate is within allowed range. Some govenors * (ondemand) will just pass target_freq=0 to get the minimum. */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; + if (target_freq < policy->min) + target_freq = policy->min; + if (target_freq > policy->max) + target_freq = policy->max; freqs.old = omap_getspeed(0); freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; From 6c5f80393b107b0c9e2a54b03b65d1880e706655 Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Wed, 29 Oct 2008 12:06:04 +0200 Subject: [PATCH 028/338] OMAP3: PM: Fix wrong sequence in suspend. Powerdomain previous state is checked after restoring new states in suspend. This patch fixes this problem. Signed-off-by: Jouni Hogander Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index b07efb26de18..488d595d8e4b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -326,7 +326,6 @@ static int omap3_pm_suspend(void) restore: /* Restore next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) { - set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); state = pwrdm_read_prev_pwrst(pwrst->pwrdm); if (state > pwrst->next_state) { printk(KERN_INFO "Powerdomain (%s) didn't enter " @@ -334,6 +333,7 @@ restore: pwrst->pwrdm->name, pwrst->next_state); ret = -1; } + set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state); } if (ret) printk(KERN_ERR "Could not enter target state in pm_suspend\n"); From 55b6019ae29456e0f1e4087546bf4221c48622a0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 4 Jun 2009 15:57:10 -0700 Subject: [PATCH 029/338] OMAP: GPIO: clear/restore level/edge detect settings on mask/unmask If IRQ triggering is enabled, it can trigger a pending interrupt even for masked interrupts. Any pending GPIO interrupts can prevent the powerdomain from hitting retention. Problem found, reported and additional review and testing by Chunquiu Wang. Tested-by: Chunquiu Wang Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/gpio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c12423..77bad14633e1 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1189,6 +1189,7 @@ static void gpio_mask_irq(unsigned int irq) struct gpio_bank *bank = get_irq_chip_data(irq); _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } static void gpio_unmask_irq(unsigned int irq) @@ -1196,6 +1197,11 @@ static void gpio_unmask_irq(unsigned int irq) unsigned int gpio = irq - IH_GPIO_BASE; struct gpio_bank *bank = get_irq_chip_data(irq); unsigned int irq_mask = 1 << get_gpio_index(gpio); + struct irq_desc *desc = irq_to_desc(irq); + u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK; + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); /* For level-triggered GPIOs, the clearing must be done after * the HW source is cleared, thus after the handler has run */ From 6fd210a9cc398ecbff7bcdbe220651b73b654f56 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 20 Jul 2009 09:09:23 -0700 Subject: [PATCH 030/338] OMAP3: Overo: add missing pen-down GPIO definition Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/board-overo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb5..e26af837510b 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -51,6 +51,7 @@ #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 +#define OVERO_GPIO_PENDOWN 114 #define OVERO_GPIO_BT_NRESET 164 #define OVERO_GPIO_USBH_CPEN 168 #define OVERO_GPIO_USBH_NRESET 183 From f60f785679b507cbeeb03d2db080ab649ac86027 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Tue, 4 Aug 2009 10:39:03 +0000 Subject: [PATCH 031/338] netxen: fix dma mask update calculation Fix dma mask calculation that caps at 63-bit addressing even when firmware advertises full 64-bit support. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 3cd8cfcf627b..70c05c4c0cab 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -260,7 +260,7 @@ nx_update_dma_mask(struct netxen_adapter *adapter) change = 0; shift = NXRD32(adapter, CRB_DMA_SHIFT); - if (shift >= 32) + if (shift > 32) return 0; if (NX_IS_REVISION_P3(adapter->ahw.revision_id) && (shift > 9)) @@ -272,7 +272,7 @@ nx_update_dma_mask(struct netxen_adapter *adapter) old_mask = pdev->dma_mask; old_cmask = pdev->dev.coherent_dma_mask; - mask = (1ULL<<(32+shift)) - 1; + mask = DMA_BIT_MASK(32+shift); err = pci_set_dma_mask(pdev, mask); if (err) From 476181cb05c6a3aea3ef42309388e255c934a06f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 4 Aug 2009 21:44:39 +0000 Subject: [PATCH 032/338] dccp: missing destroy of percpu counter variable while unload module percpu counter dccp_orphan_count is init in dccp_init() by percpu_counter_init() while dccp module is loaded, but the destroy of it is missing while dccp module is unloaded. We can get the kernel WARNING about this. Reproduct by the following commands: $ modprobe dccp $ rmmod dccp $ modprobe dccp WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c() Hardware name: VMware Virtual Platform list_add corruption. next->prev should be prev (c080c0c4), but was (null). (next =ca7188cc). Modules linked in: dccp(+) nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc Pid: 1956, comm: modprobe Not tainted 2.6.31-rc5 #55 Call Trace: [] warn_slowpath_common+0x6a/0x81 [] ? __list_add+0x27/0x5c [] warn_slowpath_fmt+0x29/0x2c [] __list_add+0x27/0x5c [] __percpu_counter_init+0x4d/0x5d [] dccp_init+0x19/0x2ed [dccp] [] do_one_initcall+0x4f/0x111 [] ? dccp_init+0x0/0x2ed [dccp] [] ? notifier_call_chain+0x26/0x48 [] ? __blocking_notifier_call_chain+0x45/0x51 [] sys_init_module+0xac/0x1bd [] sysenter_do_call+0x12/0x22 Signed-off-by: Wei Yongjun Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/dccp/proto.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 94ca8eaace7d..6294f57162bb 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -1159,6 +1159,7 @@ static void __exit dccp_fini(void) kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep); dccp_ackvec_exit(); dccp_sysctl_exit(); + percpu_counter_destroy(&dccp_orphan_count); } module_init(dccp_init); From cf39c4c572dc54adbdf8933d1e6cd87ee94d8fc0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 27 Jul 2009 08:03:18 -0700 Subject: [PATCH 033/338] phonet: phonet_device_get() fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by: Eric Dumazet Acked-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/pn_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c index b0d6ddd82a9d..c2b77a698695 100644 --- a/net/phonet/pn_dev.c +++ b/net/phonet/pn_dev.c @@ -96,7 +96,7 @@ struct net_device *phonet_device_get(struct net *net) { struct phonet_device_list *pndevs = phonet_device_list(net); struct phonet_device *pnd; - struct net_device *dev; + struct net_device *dev = NULL; spin_lock_bh(&pndevs->lock); list_for_each_entry(pnd, &pndevs->list, list) { From b4adbb4ddf63091f48668e7ff1b9b0f6f84d4b40 Mon Sep 17 00:00:00 2001 From: Pascal Terjan Date: Wed, 5 Aug 2009 04:11:39 +0000 Subject: [PATCH 034/338] Add IDs for 3C905B-TX Fast Etherlink XL PCI We found this old card which was not supported, and physically looks similar to the other 3C905B we have (9055). After adding the IDs it seems to work fine (MII report, dhcp, scp, ...) Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- drivers/net/3c59x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index c20416850948..45675889850b 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -235,6 +235,7 @@ enum vortex_chips { CH_3C900B_FL, CH_3C905_1, CH_3C905_2, + CH_3C905B_TX, CH_3C905B_1, CH_3C905B_2, @@ -307,6 +308,8 @@ static struct vortex_chip_info { PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, {"3c905 Boomerang 100baseT4", PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, }, + {"3C905B-TX Fast Etherlink XL PCI", + PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, {"3c905B Cyclone 100baseTx", PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, }, @@ -389,6 +392,7 @@ static struct pci_device_id vortex_pci_tbl[] = { { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL }, { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 }, { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 }, + { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX }, { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 }, { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 }, From 45a41d147a3a31bb218201b0dd70cfe4e9ed5105 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Sun, 2 Aug 2009 14:12:01 +0400 Subject: [PATCH 035/338] af_ieee802154: fix ioctl processing fix two errors in ioctl processing: 1) if the ioctl isn't supported one should return -ENOIOCTLCMD 2) don't call ndo_do_ioctl if the device doesn't provide it Signed-off-by: Dmitry Eremin-Solenikov --- net/ieee802154/af_ieee802154.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c index 3bb6bdb1dac1..af661805b9fa 100644 --- a/net/ieee802154/af_ieee802154.c +++ b/net/ieee802154/af_ieee802154.c @@ -136,7 +136,7 @@ static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg, unsigned int cmd) { struct ifreq ifr; - int ret = -EINVAL; + int ret = -ENOIOCTLCMD; struct net_device *dev; if (copy_from_user(&ifr, arg, sizeof(struct ifreq))) @@ -146,8 +146,10 @@ static int ieee802154_dev_ioctl(struct sock *sk, struct ifreq __user *arg, dev_load(sock_net(sk), ifr.ifr_name); dev = dev_get_by_name(sock_net(sk), ifr.ifr_name); - if (dev->type == ARPHRD_IEEE802154 || - dev->type == ARPHRD_IEEE802154_PHY) + + if ((dev->type == ARPHRD_IEEE802154 || + dev->type == ARPHRD_IEEE802154_PHY) && + dev->netdev_ops->ndo_do_ioctl) ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd); if (!ret && copy_to_user(arg, &ifr, sizeof(struct ifreq))) From a9dfac3353b03432e3d46a0dde6795588c46256d Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 3 Aug 2009 17:53:00 +0400 Subject: [PATCH 036/338] af_ieee802154: provide dummy get/setsockopt Provide dummt get/setsockopt implementations to stop these syscalls from oopsing on our sockets. Signed-off-by: Dmitry Eremin-Solenikov --- net/ieee802154/dgram.c | 14 ++++++++++++++ net/ieee802154/raw.c | 14 ++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c index 14d39840dd62..ba8b214dda8f 100644 --- a/net/ieee802154/dgram.c +++ b/net/ieee802154/dgram.c @@ -377,6 +377,18 @@ int ieee802154_dgram_deliver(struct net_device *dev, struct sk_buff *skb) return ret; } +static int dgram_getsockopt(struct sock *sk, int level, int optname, + char __user *optval, int __user *optlen) +{ + return -EOPNOTSUPP; +} + +static int dgram_setsockopt(struct sock *sk, int level, int optname, + char __user *optval, int __user optlen) +{ + return -EOPNOTSUPP; +} + struct proto ieee802154_dgram_prot = { .name = "IEEE-802.15.4-MAC", .owner = THIS_MODULE, @@ -391,5 +403,7 @@ struct proto ieee802154_dgram_prot = { .connect = dgram_connect, .disconnect = dgram_disconnect, .ioctl = dgram_ioctl, + .getsockopt = dgram_getsockopt, + .setsockopt = dgram_setsockopt, }; diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c index fca44d59f97e..9315977c4c61 100644 --- a/net/ieee802154/raw.c +++ b/net/ieee802154/raw.c @@ -238,6 +238,18 @@ void ieee802154_raw_deliver(struct net_device *dev, struct sk_buff *skb) read_unlock(&raw_lock); } +static int raw_getsockopt(struct sock *sk, int level, int optname, + char __user *optval, int __user *optlen) +{ + return -EOPNOTSUPP; +} + +static int raw_setsockopt(struct sock *sk, int level, int optname, + char __user *optval, int __user optlen) +{ + return -EOPNOTSUPP; +} + struct proto ieee802154_raw_prot = { .name = "IEEE-802.15.4-RAW", .owner = THIS_MODULE, @@ -250,5 +262,7 @@ struct proto ieee802154_raw_prot = { .unhash = raw_unhash, .connect = raw_connect, .disconnect = raw_disconnect, + .getsockopt = raw_getsockopt, + .setsockopt = raw_setsockopt, }; From 17ac2e9c58b69a1e25460a568eae1b0dc0188c25 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 03:34:06 +0000 Subject: [PATCH 037/338] rose: Fix rose_getname() leak rose_getname() can leak kernel memory to user. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/rose/af_rose.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c index f0a76f6bca71..e5f478ca3d61 100644 --- a/net/rose/af_rose.c +++ b/net/rose/af_rose.c @@ -954,6 +954,7 @@ static int rose_getname(struct socket *sock, struct sockaddr *uaddr, struct rose_sock *rose = rose_sk(sk); int n; + memset(srose, 0, sizeof(*srose)); if (peer != 0) { if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; From 80922bbb12a105f858a8f0abb879cb4302d0ecaa Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 03:48:36 +0000 Subject: [PATCH 038/338] econet: Fix econet_getname() leak econet_getname() can leak kernel memory to user. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/econet/af_econet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c index 2e1f836d4240..f0bbc57926cd 100644 --- a/net/econet/af_econet.c +++ b/net/econet/af_econet.c @@ -520,6 +520,7 @@ static int econet_getname(struct socket *sock, struct sockaddr *uaddr, if (peer) return -EOPNOTSUPP; + memset(sec, 0, sizeof(*sec)); mutex_lock(&econet_mutex); sk = sock->sk; From f6b97b29513950bfbf621a83d85b6f86b39ec8db Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 03:31:07 +0000 Subject: [PATCH 039/338] netrom: Fix nr_getname() leak nr_getname() can leak kernel memory to user. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index ce51ce012cda..ce1a34b99c23 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -847,6 +847,7 @@ static int nr_getname(struct socket *sock, struct sockaddr *uaddr, sax->fsa_ax25.sax25_family = AF_NETROM; sax->fsa_ax25.sax25_ndigis = 1; sax->fsa_ax25.sax25_call = nr->user_addr; + memset(sax->fsa_digipeater, 0, sizeof(sax->fsa_digipeater)); sax->fsa_digipeater[0] = nr->dest_addr; *uaddr_len = sizeof(struct full_sockaddr_ax25); } else { From 3d392475c873c10c10d6d96b94d092a34ebd4791 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 02:27:43 +0000 Subject: [PATCH 040/338] appletalk: fix atalk_getname() leak atalk_getname() can leak 8 bytes of kernel memory to user Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/appletalk/ddp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c index 590b83963622..9ef6ff26eb0c 100644 --- a/net/appletalk/ddp.c +++ b/net/appletalk/ddp.c @@ -1237,6 +1237,7 @@ static int atalk_getname(struct socket *sock, struct sockaddr *uaddr, return -ENOBUFS; *uaddr_len = sizeof(struct sockaddr_at); + memset(&sat.sat_zero, 0, sizeof(sat.sat_zero)); if (peer) { if (sk->sk_state != TCP_ESTABLISHED) From 09384dfc76e526c3993c09c42e016372dc9dd22c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 03:55:04 +0000 Subject: [PATCH 041/338] irda: Fix irda_getname() leak irda_getname() can leak kernel memory to user. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/irda/af_irda.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index cb762c8723ea..3ec2b434ea75 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -714,6 +714,7 @@ static int irda_getname(struct socket *sock, struct sockaddr *uaddr, struct sock *sk = sock->sk; struct irda_sock *self = irda_sk(sk); + memset(&saddr, 0, sizeof(saddr)); if (peer) { if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; From 7dd2459d8f7a967bcd1466591aec72bb3ddc07cc Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 27 Jul 2009 10:10:20 +0800 Subject: [PATCH 042/338] ipw2x00: Write outside array bounds > channel_index loops up to IPW_SCAN_CHANNELS, but is used after being > incremented. This might be able to access 1 past the end of the array Reported-by: Roel Kluin Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 44c29b3f6728..6dcac73b4d29 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -6226,7 +6226,7 @@ static void ipw_add_scan_channels(struct ipw_priv *priv, }; u8 channel; - while (channel_index < IPW_SCAN_CHANNELS) { + while (channel_index < IPW_SCAN_CHANNELS - 1) { channel = priv->speed_scan[priv->speed_scan_pos]; if (channel == 0) { From d25f9f1357139bbdc79bc960ea84909a7c22ec2b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 21:58:26 +0200 Subject: [PATCH 043/338] mwl8k: fix NULL pointer dereference on receive out-of-memory When we go into out-of-memory and fail to allocate skbuffs to refill the receive ring with, rxq_process can end up running into a receive ring entry that is marked as host-owned but doesn't have an associated skbuff. If this happens, we must break out of the rx processing loop instead of trying to process the descriptor. Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a263d5c84c08..71f3eb67981e 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1012,6 +1012,8 @@ static int rxq_process(struct ieee80211_hw *hw, int index, int limit) rmb(); skb = rxq->rx_skb[rxq->rx_head]; + if (skb == NULL) + break; rxq->rx_skb[rxq->rx_head] = NULL; rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS; From 4ff6432ea620ba467e50ec04b8271ea0eb94e62e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 21:58:39 +0200 Subject: [PATCH 044/338] mwl8k: add various missing GET_HW_SPEC endian conversions Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 71f3eb67981e..9643aa4751c9 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1656,18 +1656,18 @@ static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw) memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr)); cmd->ps_cookie = cpu_to_le32(priv->cookie_dma); cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma); - cmd->num_tx_queues = MWL8K_TX_QUEUES; + cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES); for (i = 0; i < MWL8K_TX_QUEUES; i++) cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma); - cmd->num_tx_desc_per_queue = MWL8K_TX_DESCS; - cmd->total_rx_desc = MWL8K_RX_DESCS; + cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS); + cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS); rc = mwl8k_post_cmd(hw, &cmd->header); if (!rc) { SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr); priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs); - priv->fw_rev = cmd->fw_rev; + priv->fw_rev = le32_to_cpu(cmd->fw_rev); priv->hw_rev = cmd->hw_rev; priv->region_code = le16_to_cpu(cmd->region_code); } From 37055bd455b31b8220c35a1ede9c6aceb791cc88 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 21:58:47 +0200 Subject: [PATCH 045/338] mwl8k: call pci_unmap_single() before accessing command structure again Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 9643aa4751c9..25423c05aff1 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1593,6 +1593,9 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) timeout = wait_for_completion_timeout(&cmd_wait, msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS)); + pci_unmap_single(priv->pdev, dma_addr, dma_size, + PCI_DMA_BIDIRECTIONAL); + result = &cmd->result; if (!timeout) { spin_lock_irq(&priv->fw_lock); @@ -1612,8 +1615,6 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) *result); } - pci_unmap_single(priv->pdev, dma_addr, dma_size, - PCI_DMA_BIDIRECTIONAL); return rc; } From a94cc97e14c5750ec2b50b2e4ecdfb0f369ed0f4 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 21:58:57 +0200 Subject: [PATCH 046/338] mwl8k: prevent crash in ->configure_filter() if no interface was added Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 25423c05aff1..6e491171f73e 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -261,7 +261,7 @@ struct mwl8k_vif { */ }; -#define MWL8K_VIF(_vif) (struct mwl8k_vif *)(&((_vif)->drv_priv)) +#define MWL8K_VIF(_vif) ((struct mwl8k_vif *)&((_vif)->drv_priv)) static const struct ieee80211_channel mwl8k_channels[] = { { .center_freq = 2412, .hw_value = 1, }, @@ -3219,15 +3219,19 @@ static int mwl8k_configure_filter_wt(struct work_struct *wt) struct dev_addr_list *mclist = worker->mclist; struct mwl8k_priv *priv = hw->priv; - struct mwl8k_vif *mv_vif; int rc = 0; if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { if (*total_flags & FIF_BCN_PRBRESP_PROMISC) rc = mwl8k_cmd_set_pre_scan(hw); else { - mv_vif = MWL8K_VIF(priv->vif); - rc = mwl8k_cmd_set_post_scan(hw, mv_vif->bssid); + u8 *bssid; + + bssid = "\x00\x00\x00\x00\x00\x00"; + if (priv->vif != NULL) + bssid = MWL8K_VIF(priv->vif)->bssid; + + rc = mwl8k_cmd_set_post_scan(hw, bssid); } } From 60aa569f9212a13382c29cc734f275dec0f55e0b Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 3 Aug 2009 21:59:09 +0200 Subject: [PATCH 047/338] mwl8k: prevent module unload hang We need to unregister our ieee80211_hw before resetting the chip, as the former causes firmware commands to be issued which will time out once the chip has been reset. Signed-off-by: Lennert Buytenhek Acked-by: Nicolas Pitre Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 6e491171f73e..83967afe0821 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3733,6 +3733,8 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev) ieee80211_stop_queues(hw); + ieee80211_unregister_hw(hw); + /* Remove tx reclaim tasklet */ tasklet_kill(&priv->tx_reclaim_task); @@ -3746,8 +3748,6 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev) for (i = 0; i < MWL8K_TX_QUEUES; i++) mwl8k_txq_reclaim(hw, i, 1); - ieee80211_unregister_hw(hw); - for (i = 0; i < MWL8K_TX_QUEUES; i++) mwl8k_txq_deinit(hw, i); From dd1f57ecaf9688efa69d982652ecfa3e64f1fa55 Mon Sep 17 00:00:00 2001 From: Bob Dunlop Date: Thu, 6 Aug 2009 12:01:03 -0400 Subject: [PATCH 048/338] libertas: correct packing of rxpd structure Older Gcc compilers (3.4.5 tested) need additional hints in order to get the packing of the rxpd structure (which contains a 16 bit union) correct on the ARM processor. struct txpd does not need these hints since it contains a 32 bit union that packs naturally. Signed-off-by: R.J.Dunlop Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/hostcmd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index 0a2e29140add..c8a1998d4744 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -56,8 +56,8 @@ struct rxpd { u8 bss_type; /* BSS number */ u8 bss_num; - } bss; - } u; + } __attribute__ ((packed)) bss; + } __attribute__ ((packed)) u; /* SNR */ u8 snr; From cb2f33e9596632979c140c243ac1e8e994f62180 Mon Sep 17 00:00:00 2001 From: Chris Snook Date: Thu, 6 Aug 2009 12:19:31 +0000 Subject: [PATCH 049/338] MAINTAINERS: update atlx contact info Update MAINTAINERS to reflect my current (non-)affiliation. Anyone hiring? Signed-off-by: Chris Snook Cc: Jay Cliburn Cc: Jie Yang Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b1114cfac6bf..fa76ad0a37e8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -904,7 +904,7 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn -M: Chris Snook +M: Chris Snook M: Jie Yang L: atl1-devel@lists.sourceforge.net W: http://sourceforge.net/projects/atl1 From 5d5ceb8bdde403529ad9849f300dc80b1884550f Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 6 Aug 2009 13:06:03 +0000 Subject: [PATCH 050/338] irda: fix read buffer overflow io[i] is read before the bounds check on i, order should be reversed. Signed-off-by: Roel Kluin Cc: Samuel Ortiz Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/irda/w83977af_ir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index d0883835b0c6..fe4f2b2bff96 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -115,7 +115,7 @@ static int __init w83977af_init(void) IRDA_DEBUG(0, "%s()\n", __func__ ); - for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) { + for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) { if (w83977af_open(i, io[i], irq[i], dma[i]) == 0) return 0; } From 082ba88a5e6b1425abed3fae4ad65e0e985ed081 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 6 Aug 2009 13:06:56 +0000 Subject: [PATCH 051/338] atlx: strncpy does not null terminate string strlcpy() will always null terminate the string. Signed-off-by: Roel Kluin Cc: Jay Cliburn Cc: Chris Snook Cc: Jie Yang Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/atl1c/atl1c_ethtool.c | 8 ++++---- drivers/net/atlx/atl1.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/atl1c/atl1c_ethtool.c b/drivers/net/atl1c/atl1c_ethtool.c index 607007d75b6f..00d11b480af3 100644 --- a/drivers/net/atl1c/atl1c_ethtool.c +++ b/drivers/net/atl1c/atl1c_ethtool.c @@ -232,11 +232,11 @@ static void atl1c_get_drvinfo(struct net_device *netdev, { struct atl1c_adapter *adapter = netdev_priv(netdev); - strncpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver)); - strncpy(drvinfo->version, atl1c_driver_version, + strlcpy(drvinfo->driver, atl1c_driver_name, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, atl1c_driver_version, sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info)); drvinfo->n_stats = 0; drvinfo->testinfo_len = 0; diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 94d7325caf4f..8bca12f71390 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3378,11 +3378,11 @@ static void atl1_get_drvinfo(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - strncpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); - strncpy(drvinfo->version, ATLX_DRIVER_VERSION, + strlcpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver)); + strlcpy(drvinfo->version, ATLX_DRIVER_VERSION, sizeof(drvinfo->version)); - strncpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); - strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), sizeof(drvinfo->bus_info)); drvinfo->eedump_len = ATL1_EEDUMP_LEN; } From b79a79471bd31d737c939a6ddc347417047b4320 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jussi=20M=C3=A4ki?= Date: Thu, 6 Aug 2009 21:38:14 +0000 Subject: [PATCH 052/338] Fix xfrm hash collisions by changing __xfrm4_daddr_saddr_hash to hash addresses with addition This patch fixes hash collisions in cases where number of entries have incrementing IP source and destination addresses from single respective subnets (i.e. 192.168.0.1-172.16.0.1, 192.168.0.2-172.16.0.2, and so on.). Signed-off-by: Jussi Maki Signed-off-by: David S. Miller --- net/xfrm/xfrm_hash.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xfrm/xfrm_hash.h b/net/xfrm/xfrm_hash.h index d401dc8f05ed..e5195c99f71e 100644 --- a/net/xfrm/xfrm_hash.h +++ b/net/xfrm/xfrm_hash.h @@ -16,7 +16,7 @@ static inline unsigned int __xfrm6_addr_hash(xfrm_address_t *addr) static inline unsigned int __xfrm4_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr) { - return ntohl(daddr->a4 ^ saddr->a4); + return ntohl(daddr->a4 + saddr->a4); } static inline unsigned int __xfrm6_daddr_saddr_hash(xfrm_address_t *daddr, xfrm_address_t *saddr) From e84b90ae5eb3c112d1f208964df1d8156a538289 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Aug 2009 20:27:04 +0000 Subject: [PATCH 053/338] can: Fix raw_getname() leak raw_getname() can leak 10 bytes of kernel memory to user (two bytes hole between can_family and can_ifindex, 8 bytes at the end of sockaddr_can structure) Signed-off-by: Eric Dumazet Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/raw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/can/raw.c b/net/can/raw.c index f4cc44548bda..db3152df7d2b 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -401,6 +401,7 @@ static int raw_getname(struct socket *sock, struct sockaddr *uaddr, if (peer) return -EOPNOTSUPP; + memset(addr, 0, sizeof(*addr)); addr->can_family = AF_CAN; addr->can_ifindex = ro->ifindex; From 9555b31e8c29d2000e1e1f569f6f242ebd596e47 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 6 Aug 2009 17:58:18 +0000 Subject: [PATCH 054/338] fec: fix FEC driver packet transmission breakage Commit f0b3fbeae11a526c3d308b691684589ee37c359b ("FEC Buffer rework") breaks transmission of packets where the skb data buffer is not memory aligned according to FEC_ALIGNMENT. It incorrectly passes to dma_sync_single() the buffer address directly from the skb, instead of the address calculated for use (which may be the skb address or one of the bounce buffers). It seems there is no use converting the cpu address of the buffer to a physical either, since dma_map_single() expects the cpu address and will return the dma address to use in the descriptor. So remove the use of __pa() on the buffer address as well. This patch is against 2.6.30-rc5. This breakage is a regression over 2.6.30, which does not have this problem. Signed-off-by: Greg Ungerer Signed-off-by: David S. Miller --- drivers/net/fec.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/fec.c b/drivers/net/fec.c index d4b98074b1b7..c9fd82d3a80d 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -285,6 +285,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); struct bufdesc *bdp; + void *bufaddr; unsigned short status; unsigned long flags; @@ -312,7 +313,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) status &= ~BD_ENET_TX_STATS; /* Set buffer length and buffer pointer */ - bdp->cbd_bufaddr = __pa(skb->data); + bufaddr = skb->data; bdp->cbd_datlen = skb->len; /* @@ -320,11 +321,11 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) * 4-byte boundaries. Use bounce buffers to copy data * and get it aligned. Ugh. */ - if (bdp->cbd_bufaddr & FEC_ALIGNMENT) { + if (((unsigned long) bufaddr) & FEC_ALIGNMENT) { unsigned int index; index = bdp - fep->tx_bd_base; memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len); - bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]); + bufaddr = fep->tx_bounce[index]; } /* Save skb pointer */ @@ -336,7 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Push the data cache so the CPM does not get stale memory * data. */ - bdp->cbd_bufaddr = dma_map_single(&dev->dev, skb->data, + bdp->cbd_bufaddr = dma_map_single(&dev->dev, bufaddr, FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); /* Send it on its way. Tell FEC it's ready, interrupt when done, From 876bfd4d0f18cd1f698249870c7e7fb944de1c26 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 6 Aug 2009 14:22:44 +0000 Subject: [PATCH 055/338] tun: Extend RTNL lock coverage over whole ioctl As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/tun.c | 50 ++++++++++++++++++----------------------------- 1 file changed, 19 insertions(+), 31 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 027f7aba26af..42b6c6319bc2 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1048,20 +1048,15 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) return err; } -static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr) +static int tun_get_iff(struct net *net, struct tun_struct *tun, + struct ifreq *ifr) { - struct tun_struct *tun = tun_get(file); - - if (!tun) - return -EBADFD; - DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name); strcpy(ifr->ifr_name, tun->dev->name); ifr->ifr_flags = tun_flags(tun); - tun_put(tun); return 0; } @@ -1105,8 +1100,8 @@ static int set_offload(struct net_device *dev, unsigned long arg) return 0; } -static int tun_chr_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long tun_chr_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct tun_file *tfile = file->private_data; struct tun_struct *tun; @@ -1128,34 +1123,32 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, (unsigned int __user*)argp); } + rtnl_lock(); + tun = __tun_get(tfile); if (cmd == TUNSETIFF && !tun) { - int err; - ifr.ifr_name[IFNAMSIZ-1] = '\0'; - rtnl_lock(); - err = tun_set_iff(tfile->net, file, &ifr); - rtnl_unlock(); + ret = tun_set_iff(tfile->net, file, &ifr); - if (err) - return err; + if (ret) + goto unlock; if (copy_to_user(argp, &ifr, sizeof(ifr))) - return -EFAULT; - return 0; + ret = -EFAULT; + goto unlock; } - + ret = -EBADFD; if (!tun) - return -EBADFD; + goto unlock; DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd); ret = 0; switch (cmd) { case TUNGETIFF: - ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr); + ret = tun_get_iff(current->nsproxy->net_ns, tun, &ifr); if (ret) break; @@ -1201,7 +1194,6 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, case TUNSETLINK: /* Only allow setting the type when the interface is down */ - rtnl_lock(); if (tun->dev->flags & IFF_UP) { DBG(KERN_INFO "%s: Linktype set failed because interface is up\n", tun->dev->name); @@ -1211,7 +1203,6 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, DBG(KERN_INFO "%s: linktype set to %d\n", tun->dev->name, tun->dev->type); ret = 0; } - rtnl_unlock(); break; #ifdef TUN_DEBUG @@ -1220,9 +1211,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, break; #endif case TUNSETOFFLOAD: - rtnl_lock(); ret = set_offload(tun->dev, arg); - rtnl_unlock(); break; case TUNSETTXFILTER: @@ -1230,9 +1219,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, ret = -EINVAL; if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) break; - rtnl_lock(); ret = update_filter(&tun->txflt, (void __user *)arg); - rtnl_unlock(); break; case SIOCGIFHWADDR: @@ -1248,9 +1235,7 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, DBG(KERN_DEBUG "%s: set hw address: %pM\n", tun->dev->name, ifr.ifr_hwaddr.sa_data); - rtnl_lock(); ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); - rtnl_unlock(); break; case TUNGETSNDBUF: @@ -1273,7 +1258,10 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file, break; }; - tun_put(tun); +unlock: + rtnl_unlock(); + if (tun) + tun_put(tun); return ret; } @@ -1361,7 +1349,7 @@ static const struct file_operations tun_fops = { .write = do_sync_write, .aio_write = tun_chr_aio_write, .poll = tun_chr_poll, - .ioctl = tun_chr_ioctl, + .unlocked_ioctl = tun_chr_ioctl, .open = tun_chr_open, .release = tun_chr_close, .fasync = tun_chr_fasync From a6616b42fbc39c1ccc2373996f1441ce7707ea93 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Thu, 6 Aug 2009 13:05:23 +0000 Subject: [PATCH 056/338] ixgbe: Pass rx_ring directly in ixgbe_configure_srrctl() Instead of passing the register index of the corresponding rx_ring and find the way back to get to corresponding rx_ring in ixgbe_configure_srrctl(), simplify the function ixgbe_configure_srrctl() by passing the rx_ring into it. Then the register index for that rx_ring is already available from rx_ring->reg_idx. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 55 ++++++++++------------------------ 1 file changed, 15 insertions(+), 40 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 110c65ab5cb5..e361b7f01019 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1898,46 +1898,19 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 -static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, int index) +static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring) { - struct ixgbe_ring *rx_ring; u32 srrctl; - int queue0 = 0; - unsigned long mask; + int index; struct ixgbe_ring_feature *feature = adapter->ring_feature; - if (adapter->hw.mac.type == ixgbe_mac_82599EB) { - if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - int dcb_i = feature[RING_F_DCB].indices; - if (dcb_i == 8) - queue0 = index >> 4; - else if (dcb_i == 4) - queue0 = index >> 5; - else - dev_err(&adapter->pdev->dev, "Invalid DCB " - "configuration\n"); -#ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { - struct ixgbe_ring_feature *f; - - rx_ring = &adapter->rx_ring[queue0]; - f = &adapter->ring_feature[RING_F_FCOE]; - if ((queue0 == 0) && (index > rx_ring->reg_idx)) - queue0 = f->mask + index - - rx_ring->reg_idx - 1; - } -#endif /* IXGBE_FCOE */ - } else { - queue0 = index; - } - } else { + index = rx_ring->reg_idx; + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + unsigned long mask; mask = (unsigned long) feature[RING_F_RSS].mask; - queue0 = index & mask; index = index & mask; } - - rx_ring = &adapter->rx_ring[queue0]; - srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index)); srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; @@ -2002,6 +1975,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) { u64 rdba; struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_ring *rx_ring; struct net_device *netdev = adapter->netdev; int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; int i, j; @@ -2070,16 +2044,17 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) * the Base and Length of the Rx Descriptor Ring */ for (i = 0; i < adapter->num_rx_queues; i++) { - rdba = adapter->rx_ring[i].dma; - j = adapter->rx_ring[i].reg_idx; + rx_ring = &adapter->rx_ring[i]; + rdba = rx_ring->dma; + j = rx_ring->reg_idx; IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j), (rdba & DMA_BIT_MASK(32))); IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32)); IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j), rdlen); IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0); IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0); - adapter->rx_ring[i].head = IXGBE_RDH(j); - adapter->rx_ring[i].tail = IXGBE_RDT(j); - adapter->rx_ring[i].rx_buf_len = rx_buf_len; + rx_ring->head = IXGBE_RDH(j); + rx_ring->tail = IXGBE_RDT(j); + rx_ring->rx_buf_len = rx_buf_len; #ifdef IXGBE_FCOE if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { @@ -2087,12 +2062,12 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) f = &adapter->ring_feature[RING_F_FCOE]; if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) && (i >= f->mask) && (i < f->mask + f->indices)) - adapter->rx_ring[i].rx_buf_len = + rx_ring->rx_buf_len = IXGBE_FCOE_JUMBO_FRAME_SIZE; } #endif /* IXGBE_FCOE */ - ixgbe_configure_srrctl(adapter, j); + ixgbe_configure_srrctl(adapter, rx_ring); } if (hw->mac.type == ixgbe_mac_82598EB) { From 6e455b897bb6be3a4c0c6578f679e83d399e5b92 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Thu, 6 Aug 2009 13:05:44 +0000 Subject: [PATCH 057/338] ixgbe: Disable packet split only on FCoE queues in 82599 For 82599, packet split has to be disabled for FCoE direct data placement. However, this is only required on received queues allocated for FCoE. This patch adds a per ring flags to indicate if packet split is disabled on a per queue basis, particularly for FCoE, as packet split must be disabled for large receive using direct data placement (DDP). Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe.h | 2 ++ drivers/net/ixgbe/ixgbe_main.c | 33 +++++++++++++++++---------------- 2 files changed, 19 insertions(+), 16 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index e11d83d5852b..2c4dc8221dcd 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -136,6 +136,8 @@ struct ixgbe_ring { u8 queue_index; /* needed for multiqueue queue management */ +#define IXGBE_RING_RX_PS_ENABLED (u8)(1) + u8 flags; /* per ring feature flags */ u16 head; u16 tail; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e361b7f01019..e3cb949b9aa9 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -585,7 +585,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i); if (!bi->page_dma && - (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) { + (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) { if (!bi->page) { bi->page = alloc_page(GFP_ATOMIC); if (!bi->page) { @@ -629,7 +629,7 @@ static void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter, } /* Refresh the desc even if buffer_addrs didn't change because * each write-back erases this info. */ - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma); rx_desc->read.hdr_addr = cpu_to_le64(bi->dma); } else { @@ -726,7 +726,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, break; (*work_done)++; - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc)); len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> IXGBE_RXDADV_HDRBUFLEN_SHIFT; @@ -798,7 +798,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, rx_ring->stats.packets++; rx_ring->stats.bytes += skb->len; } else { - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { rx_buffer_info->skb = next_buffer->skb; rx_buffer_info->dma = next_buffer->dma; next_buffer->skb = skb; @@ -1919,7 +1919,7 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & IXGBE_SRRCTL_BSIZEHDR_MASK; - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { #if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; #else @@ -1992,11 +1992,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) /* Decide whether to use packet split mode or not */ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; -#ifdef IXGBE_FCOE - if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) - adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; -#endif /* IXGBE_FCOE */ - /* Set the RX buffer length according to the mode */ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { rx_buf_len = IXGBE_RX_HDR_SIZE; @@ -2056,14 +2051,19 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) rx_ring->tail = IXGBE_RDT(j); rx_ring->rx_buf_len = rx_buf_len; + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) + rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED; + #ifdef IXGBE_FCOE if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { struct ixgbe_ring_feature *f; f = &adapter->ring_feature[RING_F_FCOE]; - if ((rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) && - (i >= f->mask) && (i < f->mask + f->indices)) - rx_ring->rx_buf_len = - IXGBE_FCOE_JUMBO_FRAME_SIZE; + if ((i >= f->mask) && (i < f->mask + f->indices)) { + rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED; + if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) + rx_ring->rx_buf_len = + IXGBE_FCOE_JUMBO_FRAME_SIZE; + } } #endif /* IXGBE_FCOE */ @@ -2143,7 +2143,8 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { /* Enable 82599 HW-RSC */ for (i = 0; i < adapter->num_rx_queues; i++) { - j = adapter->rx_ring[i].reg_idx; + rx_ring = &adapter->rx_ring[i]; + j = rx_ring->reg_idx; rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j)); rscctrl |= IXGBE_RSCCTL_RSCEN; /* @@ -2151,7 +2152,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) * total size of max desc * buf_len is not greater * than 65535 */ - if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) { #if (MAX_SKB_FRAGS > 16) rscctrl |= IXGBE_RSCCTL_MAXDESC_16; #elif (MAX_SKB_FRAGS > 8) From 373a88d78be540c1331ea5adcb76610dddcb008b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 7 Aug 2009 07:41:37 +0000 Subject: [PATCH 058/338] e1000e: fix acquisition of SW/FW/HW semaphore for ICHx parts For ICHx parts, write the EXTCNF_CTRL.SWFLAG bit once when trying to acquire the SW/FW/HW semaphore instead of multiple times to prevent the hardware from having problems (especially for systems with manageability enabled), and extend the timeout for the hardware to set the SWFLAG bit. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 50 ++++++++++++++++++++++++------------ 1 file changed, 34 insertions(+), 16 deletions(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index d56c7473144a..dd61e7e98ddb 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -594,8 +594,8 @@ static DEFINE_MUTEX(nvm_mutex); **/ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) { - u32 extcnf_ctrl; - u32 timeout = PHY_CFG_TIMEOUT; + u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT; + s32 ret_val = 0; might_sleep(); @@ -603,28 +603,46 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); + if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) + break; - if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)) { - extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - - extcnf_ctrl = er32(EXTCNF_CTRL); - if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) - break; - } mdelay(1); timeout--; } if (!timeout) { - hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); - extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - mutex_unlock(&nvm_mutex); - return -E1000_ERR_CONFIG; + hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; } - return 0; + timeout = PHY_CFG_TIMEOUT * 2; + + extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; + ew32(EXTCNF_CTRL, extcnf_ctrl); + + while (timeout) { + extcnf_ctrl = er32(EXTCNF_CTRL); + if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) + break; + + mdelay(1); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Failed to acquire the semaphore.\n"); + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; + ew32(EXTCNF_CTRL, extcnf_ctrl); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + +out: + if (ret_val) + mutex_unlock(&nvm_mutex); + + return ret_val; } /** From 148675a7b2061b5a5eb194530b7c4d8de1f2887e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 7 Aug 2009 07:41:56 +0000 Subject: [PATCH 059/338] e1000e: fix potential NVM corruption on ICH9 with 8K bank size The bank offset was being incorrectly calculated on ICH9 parts with a bank size of 8K (instead of the more common 4K bank) which would cause any NVM writes to be done on the wrong address after switching from bank 1 to bank 0. Additionally, assume we are meant to use bank 0 if a valid bank is not detected, and remove the unnecessary acquisition of the SW/FW/HW semaphore when writing to the shadow ram version of the NVM image. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 50 +++++++++--------------------------- 1 file changed, 12 insertions(+), 38 deletions(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index dd61e7e98ddb..99df2abf82a9 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -338,10 +338,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - union ich8_hws_flash_status hsfsts; - u32 gfpreg; - u32 sector_base_addr; - u32 sector_end_addr; + u32 gfpreg, sector_base_addr, sector_end_addr; u16 i; /* Can't read flash registers if the register set isn't mapped. */ @@ -375,20 +372,6 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Adjust to word count */ nvm->flash_bank_size /= sizeof(u16); - /* - * Make sure the flash bank size does not overwrite the 4k - * sector ranges. We may have 64k allotted to us but we only care - * about the first 2 4k sectors. Therefore, if we have anything less - * than 64k set in the HSFSTS register, we will reduce the bank size - * down to 4k and let the rest remain unused. If berasesz == 3, then - * we are working in 64k mode. Otherwise we are not. - */ - if (nvm->flash_bank_size > E1000_ICH8_SHADOW_RAM_WORDS) { - hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); - if (hsfsts.hsf_status.berasesz != 3) - nvm->flash_bank_size = E1000_ICH8_SHADOW_RAM_WORDS; - } - nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS; /* Clear shadow ram */ @@ -1324,7 +1307,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u32 act_offset; - s32 ret_val; + s32 ret_val = 0; u32 bank = 0; u16 i, word; @@ -1339,12 +1322,15 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, goto out; ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); - if (ret_val) - goto release; + if (ret_val) { + hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + bank = 0; + } act_offset = (bank) ? nvm->flash_bank_size : 0; act_offset += offset; + ret_val = 0; for (i = 0; i < words; i++) { if ((dev_spec->shadow_ram) && (dev_spec->shadow_ram[offset+i].modified)) { @@ -1359,7 +1345,6 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } -release: e1000_release_swflag_ich8lan(hw); out: @@ -1610,7 +1595,6 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, { struct e1000_nvm_info *nvm = &hw->nvm; struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; - s32 ret_val; u16 i; if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || @@ -1619,17 +1603,11 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - return ret_val; - for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } - e1000_release_swflag_ich8lan(hw); - return 0; } @@ -1670,8 +1648,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - e1000_release_swflag_ich8lan(hw); - goto out; + hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + bank = 0; } if (bank == 0) { @@ -2057,12 +2035,8 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) iteration = 1; break; case 2: - if (hw->mac.type == e1000_ich9lan) { - sector_size = ICH_FLASH_SEG_SIZE_8K; - iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_8K; - } else { - return -E1000_ERR_NVM; - } + sector_size = ICH_FLASH_SEG_SIZE_8K; + iteration = 1; break; case 3: sector_size = ICH_FLASH_SEG_SIZE_64K; @@ -2074,7 +2048,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) /* Start with the base address, then add the sector offset. */ flash_linear_addr = hw->nvm.flash_base_addr; - flash_linear_addr += (bank) ? (sector_size * iteration) : 0; + flash_linear_addr += (bank) ? flash_bank_size : 0; for (j = 0; j < iteration ; j++) { do { From 75c4885924f01aed1f887886a49dfa89960de240 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Fri, 7 Aug 2009 16:36:52 +0000 Subject: [PATCH 060/338] gianfar: keep vlan related state when restart If vlan has been enabled. ifdown followed by ifup will lost hardware related state. Also remove duplicated operation in gfar_vlan_rx_register(). Signed-off-by: Yong Zhang Acked-by: Dai Haruki Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index f8ffcbf0bc39..e212f2c5448b 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -936,6 +936,7 @@ int startup_gfar(struct net_device *dev) struct gfar __iomem *regs = priv->regs; int err = 0; u32 rctrl = 0; + u32 tctrl = 0; u32 attrs = 0; gfar_write(®s->imask, IMASK_INIT_CLEAR); @@ -1111,11 +1112,19 @@ int startup_gfar(struct net_device *dev) rctrl |= RCTRL_PADDING(priv->padding); } + /* keep vlan related bits if it's enabled */ + if (priv->vlgrp) { + rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT; + tctrl |= TCTRL_VLINS; + } + /* Init rctrl based on our settings */ gfar_write(&priv->regs->rctrl, rctrl); if (dev->features & NETIF_F_IP_CSUM) - gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM); + tctrl |= TCTRL_INIT_CSUM; + + gfar_write(&priv->regs->tctrl, tctrl); /* Set the extraction length and index */ attrs = ATTRELI_EL(priv->rx_stash_size) | @@ -1450,7 +1459,6 @@ static void gfar_vlan_rx_register(struct net_device *dev, /* Enable VLAN tag extraction */ tempval = gfar_read(&priv->regs->rctrl); - tempval |= RCTRL_VLEX; tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT); gfar_write(&priv->regs->rctrl, tempval); } else { From 018d21ed80736eab21fabf45edbd74600a1f8330 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Fri, 7 Aug 2009 06:43:01 +0000 Subject: [PATCH 061/338] MAINTAINERS: additional NETWORKING [GENERAL] and NETWORKING DRIVERS patterns Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index fa76ad0a37e8..aee67a888897 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3555,6 +3555,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ +F: include/linux/in.h +F: include/linux/net.h +F: include/linux/netdevice.h NETWORKING [IPv4/IPv6] M: "David S. Miller" @@ -3590,6 +3593,8 @@ W: http://www.linuxfoundation.org/en/Net T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Odd Fixes F: drivers/net/ +F: include/linux/if_* +F: include/linux/*device.h NETXEN (1/10) GbE SUPPORT M: Dhananjay Phadke From 418372b0ab7a3bbcc59d71e8e4d322ef18263dab Mon Sep 17 00:00:00 2001 From: Rafael Laufer Date: Fri, 7 Aug 2009 05:17:17 +0000 Subject: [PATCH 062/338] sctp: fix missing destroy of percpu counter variable in sctp_proc_exit() Commit 1748376b6626acf59c24e9592ac67b3fe2a0e026, net: Use a percpu_counter for sockets_allocated added percpu_counter function calls to sctp_proc_init code path, but forgot to add them to sctp_proc_exit(). This resulted in a following Ooops when performing this test # modprobe sctp # rmmod -f sctp # modprobe sctp [ 573.862512] BUG: unable to handle kernel paging request at f8214a24 [ 573.862518] IP: [] __percpu_counter_init+0x3f/0x70 [ 573.862530] *pde = 37010067 *pte = 00000000 [ 573.862534] Oops: 0002 [#1] SMP [ 573.862537] last sysfs file: /sys/module/libcrc32c/initstate [ 573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb ohci1394 ieee1394 e1000e [last unloaded: sctp] [ 573.862589] [ 573.862593] Pid: 5373, comm: modprobe Tainted: P R (2.6.31-rc3 #6) 7663B15 [ 573.862596] EIP: 0060:[] EFLAGS: 00010286 CPU: 1 [ 573.862599] EIP is at __percpu_counter_init+0x3f/0x70 [ 573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20 [ 573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec [ 573.862606] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70 task.ti=f69d4000) [ 573.862612] Stack: [ 573.862613] 00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30 c018e2d4 [ 573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000 c07029c0 fffffffb [ 573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860 00000001 c07010c0 [ 573.862634] Call Trace: [ 573.862644] [] ? sctp_init+0xa8/0x7d4 [sctp] [ 573.862650] [] ? marker_update_probe_range+0x184/0x260 [ 573.862659] [] ? sctp_init+0x0/0x7d4 [sctp] [ 573.862662] [] ? do_one_initcall+0x2b/0x160 [ 573.862666] [] ? tracepoint_module_notify+0x2f/0x40 [ 573.862671] [] ? notifier_call_chain+0x2d/0x70 [ 573.862678] [] ? __blocking_notifier_call_chain+0x4d/0x60 [ 573.862682] [] ? sys_init_module+0xb1/0x1f0 [ 573.862686] [] ? sysenter_do_call+0x12/0x28 [ 573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85 c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50 04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4 [ 573.862725] EIP: [] __percpu_counter_init+0x3f/0x70 SS:ESP 0068:f69d5eec [ 573.862730] CR2: 00000000f8214a24 [ 573.862734] ---[ end trace 39c4e0b55e7cf54d ]--- Signed-off-by: Rafael Laufer Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/protocol.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 79cbd47f4df7..a76da657244a 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -160,6 +160,7 @@ static void sctp_proc_exit(void) remove_proc_entry("sctp", init_net.proc_net); } #endif + percpu_counter_destroy(&sctp_sockets_allocated); } /* Private helper to extract ipv4 address and stash them in From 5e33b719c8fcccfedc1d25167826a0f93fe6c5a1 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 7 Aug 2009 03:24:27 +0000 Subject: [PATCH 063/338] pcnet32: Read buffer overflow An `options[cards_found]' that equals `sizeof(options_mapping)' is already beyond the array. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/pcnet32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index a646a445fda9..23e1a0750fe0 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -1839,7 +1839,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) lp->chip_version = chip_version; lp->msg_enable = pcnet32_debug; if ((cards_found >= MAX_UNITS) - || (options[cards_found] > sizeof(options_mapping))) + || (options[cards_found] >= sizeof(options_mapping))) lp->options = PCNET32_PORT_ASEL; else lp->options = options_mapping[options[cards_found]]; From be12159b24c532b4b48bdec5a543336438faa132 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sun, 9 Aug 2009 04:00:25 +0000 Subject: [PATCH 064/338] zorro8390: Fix read buffer overflow in zorro8390_init_one() Prevent read from cards[-1] when no card was found. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/zorro8390.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c index 37c84e3b8be0..81c753a617ab 100644 --- a/drivers/net/zorro8390.c +++ b/drivers/net/zorro8390.c @@ -120,6 +120,9 @@ static int __devinit zorro8390_init_one(struct zorro_dev *z, for (i = ARRAY_SIZE(cards)-1; i >= 0; i--) if (z->id == cards[i].id) break; + if (i < 0) + return -ENODEV; + board = z->resource.start; ioaddr = board+cards[i].offset; dev = alloc_ei_netdev(); From 973507cb8610d4c84f090d5f1f0ca54fa0559d27 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 8 Aug 2009 23:54:21 +0000 Subject: [PATCH 065/338] mlx4_en: Fix read buffer overflow in mlx4_en_complete_rx_desc() If the length is less or equal to frag_prefix_size in the first iteration we write skb_frags_rx[-1] and read from priv->frag_info[-1] Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_rx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 91bdfdfd431f..3ac0404d0d11 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -506,8 +506,9 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, PCI_DMA_FROMDEVICE); } /* Adjust size of last fragment to match actual length */ - skb_frags_rx[nr - 1].size = length - - priv->frag_info[nr - 1].frag_prefix_size; + if (nr > 0) + skb_frags_rx[nr - 1].size = length - + priv->frag_info[nr - 1].frag_prefix_size; return nr; fail: From cd92204924fafbd5c7241dfd12ca3176d542e0c5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: [PATCH 066/338] OMAP: Fix testing of cpu defines for mach-omap1 There's no need to keep these defines limited in the ifdef block for mach-omap2. It will just cause problems testing for the CPU revision in the common code, like the next patch does for the DMA errata. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/mach/cpu.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h index 285eaa3a8275..11e73d9e8928 100644 --- a/arch/arm/plat-omap/include/mach/cpu.h +++ b/arch/arm/plat-omap/include/mach/cpu.h @@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ cpu_is_omap44xx()) -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 #define OMAP2420_REV_ES1_0 0x24200024 @@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430) int omap_chip_is(struct omap_chip_id oci); void omap2_check_revision(void); - -#endif /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */ From 284119c48f4a0c469b3e0237b500e536b4bc7b6f Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: [PATCH 067/338] OMAP2/3: DMA errata correction This errata is valid for: OMAP2420 Errata 1.85 Impacts all 2420 ES rev OMAP2430 Errata 1.10 Impacts only ES1.0 Description: DMA may hang when several channels are used in parallel OMAP3430: Not impacted, so remove the errata fix for omap3 Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat Signed-off-by: Vikram Pandita Reviewed-by: Nishant Kamat Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 7677a4a1cef2..e3ac94f09006 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -946,7 +946,9 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_class_is_omap2()) { + } else if (cpu_is_omap242x() || + (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { + /* Errata: Need to write lch even if not using chaining */ dma_write(lch, CLNK_CTRL(lch)); } From 370bc1fdefb8a30018d98aca2fdfd6b6701082e7 Mon Sep 17 00:00:00 2001 From: Janboe Ye Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: [PATCH 068/338] OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing vmalloc size commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size. vmalloc space will overlap with OMAP3 sram virtual address. Signed-off-by: Li Hong Mei Signed-off-by: Janboe Ye Reviewed-by: Paul Walmsley --- arch/arm/plat-omap/sram.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 4ea73804d21e..2890b11f2387 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -44,9 +44,9 @@ #define OMAP2_SRAM_VA 0xe3000000 #define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800) #define OMAP3_SRAM_PA 0x40200000 -#define OMAP3_SRAM_VA 0xd7000000 +#define OMAP3_SRAM_VA 0xe3000000 #define OMAP3_SRAM_PUB_PA 0x40208000 -#define OMAP3_SRAM_PUB_VA 0xd7008000 +#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) #define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ #define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/ From 5032902c331acc71956e47abd90d090181c5ef4a Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Mon, 10 Aug 2009 14:49:50 +0300 Subject: [PATCH 069/338] OMAP3: Overo: Fix smsc911x platform device resource value Fixes a wrong setting of resource parameter list in SMSC911x platform driver data structure for Overo case. This fixes folowing warning when compiling for Overo board: warning: initialization from incompatible pointer type Introduced since commit id: commit 172ef275444efa12d834fb9d1b1acdac92db47f7 Author: Steve Sakoman Date: Mon Feb 2 06:27:49 2009 +0000 ARM: Add SMSC911X support to Overo platform (V2) Signed-off-by: Sergio Aguirre Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-overo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index dff5528fbfb5..fec1bb19b9ff 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -146,7 +146,7 @@ static struct platform_device overo_smsc911x_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = &overo_smsc911x_resources, + .resource = overo_smsc911x_resources, .dev = { .platform_data = &overo_smsc911x_config, }, From dfc27b34496923b5f552eb9cdf20468045114ada Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 10 Aug 2009 14:49:51 +0300 Subject: [PATCH 070/338] OMAP3: RX51: Define TWL4030 USB transceiver in board file Add OTG transceiver to RX51 platform data to prevent kernel NULL pointer dereference during MUSB initialisation. Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a0bf6744a05..56d931a425f7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; +static struct twl4030_usb_data rx51_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + static struct twl4030_platform_data rx51_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = { .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, .madc = &rx51_madc_data, + .usb = &rx51_usb_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, From 22833044fbe2764d44ae03f58508e671652ca186 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 10 Aug 2009 14:49:51 +0300 Subject: [PATCH 071/338] OMAP2/3: mmc-twl4030: Free up MMC regulators while cleaning up twl_mmc_cleanup() must free up the regulators that were allocated by twl_mmc_late_init(). This eliminates the below error when 'omap_hsmmc' module is repeatedly loaded and unloaded. "sysfs: cannot create duplicate filename '/devices/platform /mmci-omap-hs.0/microamps_requested_vmmc'" Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mmc-twl4030.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c index 1541fd4c8d0f..3c04c2f1b23f 100644 --- a/arch/arm/mach-omap2/mmc-twl4030.c +++ b/arch/arm/mach-omap2/mmc-twl4030.c @@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev) if (i != 0) break; ret = PTR_ERR(reg); + hsmmc[i].vcc = NULL; goto err; } hsmmc[i].vcc = reg; @@ -165,8 +166,13 @@ done: static void twl_mmc_cleanup(struct device *dev) { struct omap_mmc_platform_data *mmc = dev->platform_data; + int i; gpio_free(mmc->slots[0].switch_pin); + for(i = 0; i < ARRAY_SIZE(hsmmc); i++) { + regulator_put(hsmmc[i].vcc); + regulator_put(hsmmc[i].vcc_aux); + } } #ifdef CONFIG_PM From 4177662ec9f5e50b69ef074369fdb429dd48d97e Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 10 Aug 2009 14:49:52 +0300 Subject: [PATCH 072/338] OMAP3: RX51: Updated rx51_defconfig Added REGULATOR, MMC and updated default CMDLINE so RX51 now boots. Note that the regulator code should be moved from mmc-twl4030.c to omap_hsmmc.c so it can be a module. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/configs/rx51_defconfig | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index eb2cb31825c0..f238df66efd4 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0" +CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set CONFIG_TWL4030_USB=y -CONFIG_MMC=m +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set From 363ec5614f86110c6a6bdd72ac2147ebafd3ff5e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 8 Aug 2009 17:09:48 +0200 Subject: [PATCH 073/338] ar9170usb: fix spurious firmware related message When ar9170-2.fw was missing, the driver erroneously complained about missing the initialization values file ar9170-1.fw... Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/usb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c index 754b1f8d8da9..007eb85fc67e 100644 --- a/drivers/net/wireless/ath/ar9170/usb.c +++ b/drivers/net/wireless/ath/ar9170/usb.c @@ -598,11 +598,15 @@ static int ar9170_usb_request_firmware(struct ar9170_usb *aru) err = request_firmware(&aru->init_values, "ar9170-1.fw", &aru->udev->dev); + if (err) { + dev_err(&aru->udev->dev, "file with init values not found.\n"); + return err; + } err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev); if (err) { release_firmware(aru->init_values); - dev_err(&aru->udev->dev, "file with init values not found.\n"); + dev_err(&aru->udev->dev, "firmware file not found.\n"); return err; } From e9d126cdfa60b575f1b5b02024c4faee27dccf07 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 9 Aug 2009 14:24:09 +0200 Subject: [PATCH 074/338] ar9170: fix read & write outside array bounds queue == __AR9170_NUM_TXQ would cause a bug on the next line. found by Smatch ( http://repo.or.cz/w/smatch.git ). Cc: stable@kernel.org Reported-by: Dan Carpenter Signed-off-by: Dan Carpenter Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index 9d38cf60a0db..88c3d8573869 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -1967,13 +1967,14 @@ static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue, int ret; mutex_lock(&ar->mutex); - if ((param) && !(queue > __AR9170_NUM_TXQ)) { + if (queue < __AR9170_NUM_TXQ) { memcpy(&ar->edcf[ar9170_qos_hwmap[queue]], param, sizeof(*param)); ret = ar9170_set_qos(ar); - } else + } else { ret = -EINVAL; + } mutex_unlock(&ar->mutex); return ret; From dee2b904a1f93c275a015b67cd693038d74b18e8 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sun, 9 Aug 2009 21:21:57 +0200 Subject: [PATCH 075/338] IXP4xx: Fix IO_SPACE_LIMIT for 2.6.31-rc core PCI changes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 2.6.31-rc kernels don't boot on my ixp4xx box (ds101), because the libata driver doesn't find the PCI IDE controller any more. 2.6.30 was fine. I traced this to a PCI update (1f82de10d6b1d845155363c895c552e61b36b51a) in 2.6.30-git19. Diffing the kernel boot logs from 2.6.30-git18 and 2.6.30-git19 illustrates the breakage: > --- dmesg-2.6.30-git18 2009-08-04 01:45:22.000000000 +0200 > +++ dmesg-2.6.30-git19 2009-08-04 01:45:46.000000000 +0200 > @@ -26,6 +26,13 @@ > pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot > pci 0000:00:02.2: PME# disabled > PCI: bus0: Fast back to back transfers disabled > +pci 0000:00:01.0: BAR 0: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 1: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 2: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 3: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:01.0: BAR 4: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:02.0: BAR 4: can't allocate I/O resource [0x10000-0xffff] > +pci 0000:00:02.1: BAR 4: can't allocate I/O resource [0x10000-0xffff] > bio: create slab at 0 > SCSI subsystem initialized > NET: Registered protocol family 2 > @@ -44,11 +51,7 @@ > console [ttyS0] enabled > serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale > Driver 'sd' needs updating - please use bus_type methods > -PCI: enabling device 0000:00:01.0 (0140 -> 0141) > -scsi0 : pata_artop > -scsi1 : pata_artop > -ata1: PATA max UDMA/100 cmd 0x1050 ctl 0x1060 bmdma 0x1040 irq 28 > -ata2: PATA max UDMA/100 cmd 0x1058 ctl 0x1064 bmdma 0x1048 irq 28 > +pata_artop 0000:00:01.0: no available native port > Using configured DiskOnChip probe address 0x50000000 > DiskOnChip found at 0x50000000 > NAND device: Manufacturer ID: 0x98, Chip ID: 0x73 (Toshiba NAND 16MiB 3,3V 8-bit) The specific change in 1f82de10d6b1d845155363c895c552e61b36b51a responsible for this failure turned out to be the following: > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -193,7 +193,7 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, > res->flags |= pci_calc_resource_flags(l) | IORESOURCE_SIZEALIGN; > if (type == pci_bar_io) { > l &= PCI_BASE_ADDRESS_IO_MASK; > - mask = PCI_BASE_ADDRESS_IO_MASK & 0xffff; > + mask = PCI_BASE_ADDRESS_IO_MASK & IO_SPACE_LIMIT; > } else { > l &= PCI_BASE_ADDRESS_MEM_MASK; > mask = (u32)PCI_BASE_ADDRESS_MEM_MASK; Every arch except arm's ixp4xx defines IO_SPACE_LIMIT as an all-bits-one bitmask, typically -1UL but sometimes only a 16-bit 0x0000ffff. But ixp4xx defines it as 0xffff0000, which is now causing the PCI failures. Russell King noted that ixp4xx has 64KB PCI IO space, so IO_SPACE_LIMIT should be 0x0000ffff. This patch makes that change, which fixes the PCI failures on my ixp4xx box. Signed-off-by: Mikael Pettersson Signed-off-by: Krzysztof Hałasa --- arch/arm/mach-ixp4xx/include/mach/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index ce63048d45eb..8a947d42a6f1 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,7 +17,7 @@ #include -#define IO_SPACE_LIMIT 0xffff0000 +#define IO_SPACE_LIMIT 0x0000ffff extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); From ec8b4b7085605e801a7740a2c3c33256aebe249c Mon Sep 17 00:00:00 2001 From: Stephen Kitt Date: Wed, 12 Aug 2009 01:12:08 -0700 Subject: [PATCH 076/338] Input: joydev - decouple axis and button map ioctls from input constants The KEY_MAX change in 2.6.28 changed the values of the JSIOCSBTNMAP and JSIOCGBTNMAP constants; software compiled with the old values no longer works with kernels following 2.6.28, because the ioctl switch statement no longer matches the values given by the software. This patch handles these ioctls independently of the length of data specified, and applies the same treatment to JSIOCSAXMAP and JSIOCGAXMAP which currently depend on ABS_MAX. Signed-off-by: Stephen Kitt Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 64 +++++++++++++++++++++++++----------------- 1 file changed, 39 insertions(+), 25 deletions(-) diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 4cfd084fa897..9a1d55b74d7a 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -456,8 +456,11 @@ static int joydev_ioctl_common(struct joydev *joydev, unsigned int cmd, void __user *argp) { struct input_dev *dev = joydev->handle.dev; + size_t len; int i, j; + const char *name; + /* Process fixed-sized commands. */ switch (cmd) { case JS_SET_CAL: @@ -499,9 +502,22 @@ static int joydev_ioctl_common(struct joydev *joydev, return copy_to_user(argp, joydev->corr, sizeof(joydev->corr[0]) * joydev->nabs) ? -EFAULT : 0; - case JSIOCSAXMAP: - if (copy_from_user(joydev->abspam, argp, - sizeof(__u8) * (ABS_MAX + 1))) + } + + /* + * Process variable-sized commands (the axis and button map commands + * are considered variable-sized to decouple them from the values of + * ABS_MAX and KEY_MAX). + */ + switch (cmd & ~IOCSIZE_MASK) { + + case (JSIOCSAXMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); + /* + * FIXME: we should not copy into our axis map before + * validating the data. + */ + if (copy_from_user(joydev->abspam, argp, len)) return -EFAULT; for (i = 0; i < joydev->nabs; i++) { @@ -511,13 +527,17 @@ static int joydev_ioctl_common(struct joydev *joydev, } return 0; - case JSIOCGAXMAP: - return copy_to_user(argp, joydev->abspam, - sizeof(__u8) * (ABS_MAX + 1)) ? -EFAULT : 0; + case (JSIOCGAXMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->abspam)); + return copy_to_user(argp, joydev->abspam, len) ? -EFAULT : 0; - case JSIOCSBTNMAP: - if (copy_from_user(joydev->keypam, argp, - sizeof(__u16) * (KEY_MAX - BTN_MISC + 1))) + case (JSIOCSBTNMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); + /* + * FIXME: we should not copy into our keymap before + * validating the data. + */ + if (copy_from_user(joydev->keypam, argp, len)) return -EFAULT; for (i = 0; i < joydev->nkey; i++) { @@ -529,25 +549,19 @@ static int joydev_ioctl_common(struct joydev *joydev, return 0; - case JSIOCGBTNMAP: - return copy_to_user(argp, joydev->keypam, - sizeof(__u16) * (KEY_MAX - BTN_MISC + 1)) ? -EFAULT : 0; + case (JSIOCGBTNMAP & ~IOCSIZE_MASK): + len = min_t(size_t, _IOC_SIZE(cmd), sizeof(joydev->keypam)); + return copy_to_user(argp, joydev->keypam, len) ? -EFAULT : 0; - default: - if ((cmd & ~IOCSIZE_MASK) == JSIOCGNAME(0)) { - int len; - const char *name = dev->name; + case JSIOCGNAME(0): + name = dev->name; + if (!name) + return 0; - if (!name) - return 0; - len = strlen(name) + 1; - if (len > _IOC_SIZE(cmd)) - len = _IOC_SIZE(cmd); - if (copy_to_user(argp, name, len)) - return -EFAULT; - return len; - } + len = min_t(size_t, _IOC_SIZE(cmd), strlen(name) + 1); + return copy_to_user(argp, name, len) ? -EFAULT : len; } + return -EINVAL; } From 9799218ae36910af50f002a5db1802d576fffb43 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Aug 2009 17:37:52 -0700 Subject: [PATCH 077/338] Revert "libertas: Read buffer overflow" This reverts commit 57921c312e8cef72ba35a4cfe870b376da0b1b87. On request from John Linville: It has been shown to create a new problem. There is work towards a solution to that one, but it isn't a simple clean-up. Signed-off-by: David S. Miller --- drivers/net/wireless/libertas/assoc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c index d6997371c27e..b9b374119033 100644 --- a/drivers/net/wireless/libertas/assoc.c +++ b/drivers/net/wireless/libertas/assoc.c @@ -1,7 +1,6 @@ /* Copyright (C) 2006, Red Hat, Inc. */ #include -#include #include #include #include @@ -44,21 +43,21 @@ static int get_common_rates(struct lbs_private *priv, u16 *rates_size) { u8 *card_rates = lbs_bg_rates; + size_t num_card_rates = sizeof(lbs_bg_rates); int ret = 0, i, j; - u8 tmp[(ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1)]; + u8 tmp[30]; size_t tmp_size = 0; /* For each rate in card_rates that exists in rate1, copy to tmp */ - for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) { - for (j = 0; j < *rates_size && rates[j]; j++) { + for (i = 0; card_rates[i] && (i < num_card_rates); i++) { + for (j = 0; rates[j] && (j < *rates_size); j++) { if (rates[j] == card_rates[i]) tmp[tmp_size++] = card_rates[i]; } } lbs_deb_hex(LBS_DEB_JOIN, "AP rates ", rates, *rates_size); - lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, - ARRAY_SIZE(lbs_bg_rates)); + lbs_deb_hex(LBS_DEB_JOIN, "card rates ", card_rates, num_card_rates); lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size); lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate); @@ -70,7 +69,10 @@ static int get_common_rates(struct lbs_private *priv, lbs_pr_alert("Previously set fixed data rate %#x isn't " "compatible with the network.\n", priv->cur_rate); ret = -1; + goto done; } + ret = 0; + done: memset(rates, 0, *rates_size); *rates_size = min_t(int, tmp_size, *rates_size); @@ -320,7 +322,7 @@ static int lbs_associate(struct lbs_private *priv, rates = (struct mrvl_ie_rates_param_set *) pos; rates->header.type = cpu_to_le16(TLV_TYPE_RATES); memcpy(&rates->rates, &bss->rates, MAX_RATES); - tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES); + tmplen = MAX_RATES; if (get_common_rates(priv, rates->rates, &tmplen)) { ret = -1; goto done; @@ -596,7 +598,7 @@ static int lbs_adhoc_join(struct lbs_private *priv, /* Copy Data rates from the rates recorded in scan response */ memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates)); - ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES); + ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES); memcpy(cmd.bss.rates, bss->rates, ratesize); if (get_common_rates(priv, cmd.bss.rates, &ratesize)) { lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n"); From 839d1624b9dcf31fdc02e47359043bb7bd71d6ca Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 12 Aug 2009 22:18:14 -0700 Subject: [PATCH 078/338] 8139cp: balance dma_map_single vs dma_unmap_single pair The driver always: 1. allocate cp->rx_buf_sz + NET_IP_ALIGN 2. map cp->rx_buf_sz Signed-off-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/8139cp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 50efde11ea6c..d0dbbf39349a 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -515,7 +515,7 @@ rx_status_loop: dma_addr_t mapping; struct sk_buff *skb, *new_skb; struct cp_desc *desc; - unsigned buflen; + const unsigned buflen = cp->rx_buf_sz; skb = cp->rx_skb[rx_tail]; BUG_ON(!skb); @@ -549,8 +549,7 @@ rx_status_loop: pr_debug("%s: rx slot %d status 0x%x len %d\n", dev->name, rx_tail, status, len); - buflen = cp->rx_buf_sz + NET_IP_ALIGN; - new_skb = netdev_alloc_skb(dev, buflen); + new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN); if (!new_skb) { dev->stats.rx_dropped++; goto rx_next; From 416fbdff2137e8d8cc8f23f517bee3a26b11526f Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 11 Aug 2009 13:10:33 -0700 Subject: [PATCH 079/338] mac80211: fix panic when splicing unprepared TIDs We splice skbs from the pending queue for a TID onto the local pending queue when tearing down a block ack request. This is not necessary unless we actually have received a request to start a block ack request (rate control, for example). If we never received that request we should not be splicing the tid pending queue as it would be null, causing a panic. Not sure yet how exactly we allowed through a call when the tid state does not have at least HT_ADDBA_REQUESTED_MSK set, that will require some further review as it is not quite obvious. For more information see the bug report: http://bugzilla.kernel.org/show_bug.cgi?id=13922 This fixes this oops: BUG: unable to handle kernel NULL pointer dereference at 00000030 IP: [] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] *pdpt = 0000000002d1e001 *pde = 0000000000000000 Thread overran stack, or stack corrupted Oops: 0000 [#1] SMP last sysfs file: /sys/module/aes_generic/initstate Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.31-rc5-wl #2) Dell DV051 EIP: 0060:[] EFLAGS: 00010292 CPU: 0 EIP is at ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] EAX: 00000030 EBX: 0000004c ECX: 00000003 EDX: 00000000 ESI: c1c98000 EDI: f745a1c0 EBP: c076be58 ESP: c076be38 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c076a000 task=c0709160 task.ti=c076a000) Stack: Call Trace: [] ? ieee80211_stop_tx_ba_cb+0xab/0x150 [mac80211] [] ? ieee80211_tasklet_handler+0xce/0x110 [mac80211] [] ? net_rx_action+0xef/0x1d0 [] ? tasklet_action+0x58/0xc0 [] ? __do_softirq+0xc2/0x190 [] ? handle_IRQ_event+0x58/0x140 [] ? ack_apic_level+0x7e/0x270 [] ? do_softirq+0x3d/0x40 [] ? irq_exit+0x65/0x90 [] ? do_IRQ+0x4f/0xc0 [] ? irq_exit+0x7d/0x90 [] ? smp_apic_timer_interrupt+0x57/0x90 [] ? common_interrupt+0x29/0x30 [] ? mwait_idle+0xbe/0x100 [] ? cpu_idle+0x52/0x90 [] ? rest_init+0x55/0x60 [] ? start_kernel+0x315/0x37d [] ? unknown_bootoption+0x0/0x1f9 [] ? i386_start_kernel+0x79/0x81 Code: EIP: [] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] SS:ESP 0068:c076be38 CR2: 0000000000000030 Cc: stable@kernel.org Testedy-by: Jack Lau Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 9e5762ad307d..a24e59816b93 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -381,6 +381,14 @@ static void ieee80211_agg_splice_packets(struct ieee80211_local *local, &local->hw, queue, IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + if (!(sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK)) + return; + + if (WARN(!sta->ampdu_mlme.tid_tx[tid], + "TID %d gone but expected when splicing aggregates from" + "the pending queue\n", tid)) + return; + if (!skb_queue_empty(&sta->ampdu_mlme.tid_tx[tid]->pending)) { spin_lock_irqsave(&local->queue_stop_reason_lock, flags); /* mark queue as pending, it is stopped already */ From 15052c9e85bf0cdadcb69eb89623bf12bad8b4f8 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:33:17 +0530 Subject: [PATCH 080/338] [SCSI] mpt2sas: Introduced check for enclosure_handle to avoid crash Kernel panic is seen because of enclosure_handle received from FW is zero. Check is introduced before calling mpt2sas_config_get_enclosure_pg0. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 2a01a5f2a84d..b1326bf78c9a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3663,12 +3663,11 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) sas_device->hidden_raid_component = is_pd; /* get enclosure_logical_id */ - if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply, &enclosure_pg0, - MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, - sas_device->enclosure_handle))) { + if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0( + ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE, + sas_device->enclosure_handle))) sas_device->enclosure_logical_id = le64_to_cpu(enclosure_pg0.EnclosureLogicalID); - } /* get device name */ sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); From 20f5895d55d9281830bfb7819c5c5b70b05297a6 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:34:26 +0530 Subject: [PATCH 081/338] [SCSI] mpt2sas: Expander fix oops saying "Already part of another port" Kernel panic is seen because driver did not tear down the port which should be dnoe using mpt2sas_transport_port_remove(). without this fix When expander is added back we would oops inside sas_port_add_phy. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index b1326bf78c9a..918445e1e65f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3426,7 +3426,7 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) __le64 sas_address; int i; unsigned long flags; - struct _sas_port *mpt2sas_port; + struct _sas_port *mpt2sas_port = NULL; int rc = 0; if (!handle) @@ -3518,12 +3518,20 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) &expander_pg1, i, handle))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); - continue; + rc = -1; + goto out_fail; } sas_expander->phy[i].handle = handle; sas_expander->phy[i].phy_id = i; - mpt2sas_transport_add_expander_phy(ioc, &sas_expander->phy[i], - expander_pg1, sas_expander->parent_dev); + + if ((mpt2sas_transport_add_expander_phy(ioc, + &sas_expander->phy[i], expander_pg1, + sas_expander->parent_dev))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } } if (sas_expander->enclosure_handle) { @@ -3540,8 +3548,9 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle) out_fail: - if (sas_expander) - kfree(sas_expander->phy); + if (mpt2sas_port) + mpt2sas_transport_port_remove(ioc, sas_expander->sas_address, + sas_expander->parent_handle); kfree(sas_expander); return rc; } From 62727a7ba43c0abf2673e3877079c136a9721792 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:35:18 +0530 Subject: [PATCH 082/338] [SCSI] mpt2sas: Raid 10 Value is showing as Raid 1E in /va/log/messages When a volume is activated, the driver will recieve a pair of ir config change events to remove the foreign volume, then add the native. In the process of the removal event, the hidden raid componet is removed from the parent.When the disks is added back, the adding of the port fails becuase there is no instance of the device in its parent. To fix this issue, the driver needs to call mpt2sas_transport_update_links() prior to calling _scsih_add_device. In addition, we added sanity checks on volume add and removal to ignore events for foreign volumes. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 90 ++++++++++++++++++++-------- 1 file changed, 64 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 918445e1e65f..22a95421e367 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -4258,12 +4258,6 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, u16 handle = le16_to_cpu(element->VolDevHandle); int rc; -#if 0 /* RAID_HACKS */ - if (le32_to_cpu(event_data->Flags) & - MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) - return; -#endif - mpt2sas_config_get_volume_wwid(ioc, handle, &wwid); if (!wwid) { printk(MPT2SAS_ERR_FMT @@ -4318,12 +4312,6 @@ _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, unsigned long flags; struct MPT2SAS_TARGET *sas_target_priv_data; -#if 0 /* RAID_HACKS */ - if (le32_to_cpu(event_data->Flags) & - MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) - return; -#endif - spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); @@ -4436,14 +4424,38 @@ _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc, struct _sas_device *sas_device; unsigned long flags; u16 handle = le16_to_cpu(element->PhysDiskDevHandle); + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; spin_lock_irqsave(&ioc->sas_device_lock, flags); sas_device = _scsih_sas_device_find_by_handle(ioc, handle); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (sas_device) + if (sas_device) { sas_device->hidden_raid_component = 1; - else - _scsih_add_device(ioc, handle, 0, 1); + return; + } + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, + MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + _scsih_link_change(ioc, + le16_to_cpu(sas_device_pg0.ParentDevHandle), + handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + + _scsih_add_device(ioc, handle, 0, 1); } #ifdef CONFIG_SCSI_MPT2SAS_LOGGING @@ -4543,12 +4555,15 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, { Mpi2EventIrConfigElement_t *element; int i; + u8 foreign_config; #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_ir_config_change_event_debug(ioc, event_data); #endif + foreign_config = (le32_to_cpu(event_data->Flags) & + MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0]; for (i = 0; i < event_data->NumElements; i++, element++) { @@ -4556,11 +4571,13 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, switch (element->ReasonCode) { case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED: case MPI2_EVENT_IR_CHANGE_RC_ADDED: - _scsih_sas_volume_add(ioc, element); + if (!foreign_config) + _scsih_sas_volume_add(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED: case MPI2_EVENT_IR_CHANGE_RC_REMOVED: - _scsih_sas_volume_delete(ioc, element); + if (!foreign_config) + _scsih_sas_volume_delete(ioc, element); break; case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED: _scsih_sas_pd_hide(ioc, element); @@ -4679,6 +4696,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 state; struct _sas_device *sas_device; unsigned long flags; + Mpi2ConfigReply_t mpi_reply; + Mpi2SasDevicePage0_t sas_device_pg0; + u32 ioc_status; if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) return; @@ -4695,22 +4715,40 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, spin_unlock_irqrestore(&ioc->sas_device_lock, flags); switch (state) { -#if 0 - case MPI2_RAID_PD_STATE_OFFLINE: - if (sas_device) - _scsih_remove_device(ioc, handle); - break; -#endif case MPI2_RAID_PD_STATE_ONLINE: case MPI2_RAID_PD_STATE_DEGRADED: case MPI2_RAID_PD_STATE_REBUILDING: case MPI2_RAID_PD_STATE_OPTIMAL: - if (sas_device) + if (sas_device) { sas_device->hidden_raid_component = 1; - else - _scsih_add_device(ioc, handle, 0, 1); + return; + } + + if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + _scsih_link_change(ioc, + le16_to_cpu(sas_device_pg0.ParentDevHandle), + handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + + _scsih_add_device(ioc, handle, 0, 1); + break; + case MPI2_RAID_PD_STATE_OFFLINE: case MPI2_RAID_PD_STATE_NOT_CONFIGURED: case MPI2_RAID_PD_STATE_NOT_COMPATIBLE: case MPI2_RAID_PD_STATE_HOT_SPARE: From be9e8cd75ce8d94ae4aab721fdcc337fa78a9090 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:36:43 +0530 Subject: [PATCH 083/338] [SCSI] mpt2sas: Excessive log info causes sas iounit page time out Inhibit 0x3117 loginfos - during cable pull, there are too many printks going to the syslog, this is have impact on how fast the interrupt routine can handle keeping up with command completions; this was the root cause to the config pages timeouts. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 4 ++++ drivers/scsi/mpt2sas/mpt2sas_scsih.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index f3da592f7bcc..ed9965e4b96b 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -440,6 +440,10 @@ _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info) if (sas_loginfo.dw.bus_type != 3 /*SAS*/) return; + /* each nexus loss loginfo */ + if (log_info == 0x31170000) + return; + /* eat the loginfos associated with task aborts */ if (ioc->ignore_loginfos && (log_info == 30050000 || log_info == 0x31140000 || log_info == 0x31130000)) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 22a95421e367..25c8d8294af6 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -2767,6 +2767,10 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, char *desc_ioc_state = NULL; char *desc_scsi_status = NULL; char *desc_scsi_state = ioc->tmp_string; + u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo); + + if (log_info == 0x31170000) + return; switch (ioc_status) { case MPI2_IOCSTATUS_SUCCESS: From 6bd4e1e4d6023f4da069fd68729c502cc4e6dfd0 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:37:14 +0530 Subject: [PATCH 084/338] [SCSI] mpt2sas: fix infinite loop inside config request This restriction is introduced just to avoid loop of config_request. Retry must be limited so we have restricted config request to maximum 2 times. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_config.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 58cfb97846f7..1c6658c60239 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -247,6 +247,12 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t retry_count = 0; retry_config: + if (retry_count) { + if (retry_count > 2) /* attempt only 2 retries */ + return -EFAULT; + printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n", + ioc->name, __func__, retry_count); + } wait_state_count = 0; ioc_state = mpt2sas_base_get_iocstate(ioc, 1); while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { From e4750c989f732555fca86dd73d488c79972362db Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:37:59 +0530 Subject: [PATCH 085/338] [SCSI] mpt2sas: fix crash due to Watchdog is active while OS in standby mode Fix oops ocurring at hibernation time. This oops was due to the firmware fault watchdog timer still running after we freed resources. To fix the issue we need to terminate the watchdog timer at hibernation time. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 88 +++++++++++++++++++--------- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 + drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 + 3 files changed, 64 insertions(+), 28 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index ed9965e4b96b..c29c4f9851b9 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -119,6 +119,64 @@ _base_fault_reset_work(struct work_struct *work) spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); } +/** + * mpt2sas_base_start_watchdog - start the fault_reset_work_q + * @ioc: pointer to scsi command object + * Context: sleep. + * + * Return nothing. + */ +void +mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + + if (ioc->fault_reset_work_q) + return; + + /* initialize fault polling */ + INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); + snprintf(ioc->fault_reset_work_q_name, + sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + ioc->fault_reset_work_q = + create_singlethread_workqueue(ioc->fault_reset_work_q_name); + if (!ioc->fault_reset_work_q) { + printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", + ioc->name, __func__, __LINE__); + return; + } + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + if (ioc->fault_reset_work_q) + queue_delayed_work(ioc->fault_reset_work_q, + &ioc->fault_reset_work, + msecs_to_jiffies(FAULT_POLLING_INTERVAL)); + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); +} + +/** + * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q + * @ioc: pointer to scsi command object + * Context: sleep. + * + * Return nothing. + */ +void +mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); + wq = ioc->fault_reset_work_q; + ioc->fault_reset_work_q = NULL; + spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + if (wq) { + if (!cancel_delayed_work(&ioc->fault_reset_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + } +} + #ifdef CONFIG_SCSI_MPT2SAS_LOGGING /** * _base_sas_ioc_info - verbose translation of the ioc status @@ -3209,7 +3267,6 @@ int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) { int r, i; - unsigned long flags; dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); @@ -3292,23 +3349,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) if (r) goto out_free_resources; - /* initialize fault polling */ - INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); - snprintf(ioc->fault_reset_work_q_name, - sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); - ioc->fault_reset_work_q = - create_singlethread_workqueue(ioc->fault_reset_work_q_name); - if (!ioc->fault_reset_work_q) { - printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n", - ioc->name, __func__, __LINE__); - goto out_free_resources; - } - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - if (ioc->fault_reset_work_q) - queue_delayed_work(ioc->fault_reset_work_q, - &ioc->fault_reset_work, - msecs_to_jiffies(FAULT_POLLING_INTERVAL)); - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); + mpt2sas_base_start_watchdog(ioc); return 0; out_free_resources: @@ -3341,20 +3382,11 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) { - unsigned long flags; - struct workqueue_struct *wq; dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name, __func__)); - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - wq = ioc->fault_reset_work_q; - ioc->fault_reset_work_q = NULL; - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); - if (!cancel_delayed_work(&ioc->fault_reset_work)) - flush_workqueue(wq); - destroy_workqueue(wq); - + mpt2sas_base_stop_watchdog(ioc); mpt2sas_base_free_resources(ioc); _base_release_memory_pools(ioc); kfree(ioc->pfacts); diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 286c185fa9e4..a29935726e7a 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -673,6 +673,8 @@ typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, /* base shared API */ extern struct list_head mpt2sas_ioc_list; +void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc); +void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc); int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc); void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 25c8d8294af6..2e9a4445596f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5824,6 +5824,7 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state) struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); u32 device_state; + mpt2sas_base_stop_watchdog(ioc); flush_scheduled_work(); scsi_block_requests(shost); device_state = pci_choose_state(pdev, state); @@ -5866,6 +5867,7 @@ _scsih_resume(struct pci_dev *pdev) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET); scsi_unblock_requests(shost); + mpt2sas_base_start_watchdog(ioc); return 0; } #endif /* CONFIG_PM */ From fcfe6392d18283df3c561b5ef59c330d485ff8ca Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:38:48 +0530 Subject: [PATCH 086/338] [SCSI] mpt2sas: fix oops because drv data points to NULL on resume from hibernate Fix another ocurring when the system resumes. This oops was due to driver setting the pci drvdata to NULL on the prior hibernation. Becuase it was set to NULL, upon resmume we assume the pci drvdata is non-zero, and we oops. To fix the ooops, we don't set pci drvdata to NULL at hibernation time. Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index c29c4f9851b9..35a13867495e 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1171,7 +1171,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) } } - pci_set_drvdata(pdev, ioc->shost); _base_mask_interrupts(ioc); r = _base_enable_msix(ioc); if (r) @@ -1194,7 +1193,6 @@ mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc) ioc->pci_irq = -1; pci_release_selected_regions(ioc->pdev, ioc->bars); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); return r; } @@ -3253,7 +3251,6 @@ mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc) ioc->chip_phys = 0; pci_release_selected_regions(ioc->pdev, ioc->bars); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); return; } @@ -3275,6 +3272,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) if (r) return r; + pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET); if (r) goto out_free_resources; @@ -3357,6 +3355,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->remove_host = 1; mpt2sas_base_free_resources(ioc); _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->tm_cmds.reply); kfree(ioc->transport_cmds.reply); kfree(ioc->config_cmds.reply); @@ -3389,6 +3388,7 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) mpt2sas_base_stop_watchdog(ioc); mpt2sas_base_free_resources(ioc); _base_release_memory_pools(ioc); + pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->pfacts); kfree(ioc->ctl_cmds.reply); kfree(ioc->base_cmds.reply); From f9b14c9183b250cf128c7d2341e6b9bdbbcd8f35 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 7 Aug 2009 19:39:59 +0530 Subject: [PATCH 087/338] [SCSI] mpt2sas: Bump driver version 01.100.04.00 Bump version to 01.100.04.00 Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index a29935726e7a..acdcff150a35 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,10 +69,10 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "01.100.03.00" +#define MPT2SAS_DRIVER_VERSION "01.100.04.00" #define MPT2SAS_MAJOR_VERSION 01 #define MPT2SAS_MINOR_VERSION 100 -#define MPT2SAS_BUILD_VERSION 03 +#define MPT2SAS_BUILD_VERSION 04 #define MPT2SAS_RELEASE_VERSION 00 /* From 993e6f2fd487e2acddd711f79cf48f3420731382 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Tue, 11 Aug 2009 02:41:24 +0000 Subject: [PATCH 088/338] can: fix oops caused by wrong rtnl newlink usage For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created with the ip tool ... The invocation of 'ip link add type can' lead to an oops as the standard rtnl newlink function was called: http://bugzilla.kernel.org/show_bug.cgi?id=13954 This patch adds a private newlink function for the CAN device driver interface that unconditionally returns -EOPNOTSUPP. Signed-off-by: Oliver Hartkopp Reported-by: Dmitry Eremin-Solenikov CC: Patrick McHardy CC: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 9e4283aff828..e1a4f8214239 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -611,11 +611,18 @@ nla_put_failure: return -EMSGSIZE; } +static int can_newlink(struct net_device *dev, + struct nlattr *tb[], struct nlattr *data[]) +{ + return -EOPNOTSUPP; +} + static struct rtnl_link_ops can_link_ops __read_mostly = { .kind = "can", .maxtype = IFLA_CAN_MAX, .policy = can_policy, .setup = can_setup, + .newlink = can_newlink, .changelink = can_changelink, .fill_info = can_fill_info, .fill_xstats = can_fill_xstats, From 237057ad3fe5644fa471be474a160de2fc2e5870 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Tue, 11 Aug 2009 13:18:14 +0000 Subject: [PATCH 089/338] ixgbe: fix issues setting rx-usecs with legacy interrupts Currently setting rx-usecs when the interface is in legacy interrupt mode it is not immediate. We were only setting EITR for each MSIx vector and since this count would be zero for legacy mode it wasn't set until after a reset. This patch corrects that by checking what mode we are in and then setting EITR accordingly. Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 79144e950a34..dff8dfac7ed9 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1948,6 +1948,7 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_q_vector *q_vector; int i; if (ec->tx_max_coalesced_frames_irq) @@ -1982,14 +1983,24 @@ static int ixgbe_set_coalesce(struct net_device *netdev, adapter->itr_setting = 0; } - for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { - struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; - if (q_vector->txr_count && !q_vector->rxr_count) - /* tx vector gets half the rate */ - q_vector->eitr = (adapter->eitr_param >> 1); - else - /* rx only or mixed */ - q_vector->eitr = adapter->eitr_param; + /* MSI/MSIx Interrupt Mode */ + if (adapter->flags & + (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) { + int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + for (i = 0; i < num_vectors; i++) { + q_vector = adapter->q_vector[i]; + if (q_vector->txr_count && !q_vector->rxr_count) + /* tx vector gets half the rate */ + q_vector->eitr = (adapter->eitr_param >> 1); + else + /* rx only or mixed */ + q_vector->eitr = adapter->eitr_param; + ixgbe_write_eitr(q_vector); + } + /* Legacy Interrupt Mode */ + } else { + q_vector = adapter->q_vector[0]; + q_vector->eitr = adapter->eitr_param; ixgbe_write_eitr(q_vector); } From e424fa9d6a0add1a9b812b07e3607daaa5b9e53d Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Thu, 13 Aug 2009 07:03:00 +0000 Subject: [PATCH 090/338] netxen: remove netxen workqueue o Remove private workqueue in the driver, move all scheduled tasks to keventd workqueues. This makes ports (interfaces) of same / different NIC boards independent, in terms of their link watchdog and reset tasks. o Move quick checks for link status and temperature in timer callback, schedule watchdog task only if link status changed or temperature reached critical threshold. This also fixes deadlock when thermal panic occurs, watchdog work was flushing workqueue that it was sitting on. Signed-off-by: Amit Kumar Salecha Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 +- drivers/net/netxen/netxen_nic_main.c | 69 +++++++++++++++++----------- 2 files changed, 42 insertions(+), 29 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index f86e05047d19..a9c1fcca5e75 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1254,7 +1254,7 @@ struct netxen_adapter { u8 mc_enabled; u8 max_mc_count; u8 rss_supported; - u8 resv2; + u8 link_changed; u32 resv3; u8 has_link_events; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 70c05c4c0cab..d24e1cb93a26 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -94,10 +94,6 @@ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { MODULE_DEVICE_TABLE(pci, netxen_pci_tbl); -static struct workqueue_struct *netxen_workq; -#define SCHEDULE_WORK(tp) queue_work(netxen_workq, tp) -#define FLUSH_SCHEDULED_WORK() flush_workqueue(netxen_workq) - static void netxen_watchdog(unsigned long); static uint32_t crb_cmd_producer[4] = { @@ -880,7 +876,6 @@ netxen_nic_down(struct netxen_adapter *adapter, struct net_device *netdev) spin_unlock(&adapter->tx_clean_lock); del_timer_sync(&adapter->watchdog_timer); - FLUSH_SCHEDULED_WORK(); } @@ -1177,6 +1172,9 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) unregister_netdev(netdev); + cancel_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->tx_timeout_task); + if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) { netxen_nic_detach(adapter); } @@ -1211,6 +1209,9 @@ netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state) if (netif_running(netdev)) netxen_nic_down(adapter, netdev); + cancel_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->tx_timeout_task); + if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) netxen_nic_detach(adapter); @@ -1549,11 +1550,6 @@ static int netxen_nic_check_temp(struct netxen_adapter *adapter) "%s: Device temperature %d degrees C exceeds" " maximum allowed. Hardware has been shut down.\n", netdev->name, temp_val); - - netif_device_detach(netdev); - netxen_nic_down(adapter, netdev); - netxen_nic_detach(adapter); - rv = 1; } else if (temp_state == NX_TEMP_WARN) { if (adapter->temp == NX_TEMP_NORMAL) { @@ -1587,10 +1583,7 @@ void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup) netif_carrier_off(netdev); netif_stop_queue(netdev); } - - if (!adapter->has_link_events) - netxen_nic_set_link_parameters(adapter); - + adapter->link_changed = !adapter->has_link_events; } else if (!adapter->ahw.linkup && linkup) { printk(KERN_INFO "%s: %s NIC Link is up\n", netxen_nic_driver_name, netdev->name); @@ -1599,9 +1592,7 @@ void netxen_advert_link_change(struct netxen_adapter *adapter, int linkup) netif_carrier_on(netdev); netif_wake_queue(netdev); } - - if (!adapter->has_link_events) - netxen_nic_set_link_parameters(adapter); + adapter->link_changed = !adapter->has_link_events; } } @@ -1628,11 +1619,36 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter) netxen_advert_link_change(adapter, linkup); } +static void netxen_nic_thermal_shutdown(struct netxen_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + netif_device_detach(netdev); + netxen_nic_down(adapter, netdev); + netxen_nic_detach(adapter); +} + static void netxen_watchdog(unsigned long v) { struct netxen_adapter *adapter = (struct netxen_adapter *)v; - SCHEDULE_WORK(&adapter->watchdog_task); + if (netxen_nic_check_temp(adapter)) + goto do_sched; + + if (!adapter->has_link_events) { + netxen_nic_handle_phy_intr(adapter); + + if (adapter->link_changed) + goto do_sched; + } + + if (netif_running(adapter->netdev)) + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); + + return; + +do_sched: + schedule_work(&adapter->watchdog_task); } void netxen_watchdog_task(struct work_struct *work) @@ -1640,11 +1656,13 @@ void netxen_watchdog_task(struct work_struct *work) struct netxen_adapter *adapter = container_of(work, struct netxen_adapter, watchdog_task); - if (netxen_nic_check_temp(adapter)) + if (adapter->temp == NX_TEMP_PANIC) { + netxen_nic_thermal_shutdown(adapter); return; + } - if (!adapter->has_link_events) - netxen_nic_handle_phy_intr(adapter); + if (adapter->link_changed) + netxen_nic_set_link_parameters(adapter); if (netif_running(adapter->netdev)) mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); @@ -1652,9 +1670,8 @@ void netxen_watchdog_task(struct work_struct *work) static void netxen_tx_timeout(struct net_device *netdev) { - struct netxen_adapter *adapter = (struct netxen_adapter *) - netdev_priv(netdev); - SCHEDULE_WORK(&adapter->tx_timeout_task); + struct netxen_adapter *adapter = netdev_priv(netdev); + schedule_work(&adapter->tx_timeout_task); } static void netxen_tx_timeout_task(struct work_struct *work) @@ -1811,9 +1828,6 @@ static int __init netxen_init_module(void) { printk(KERN_INFO "%s\n", netxen_nic_driver_string); - if ((netxen_workq = create_singlethread_workqueue("netxen")) == NULL) - return -ENOMEM; - return pci_register_driver(&netxen_driver); } @@ -1822,7 +1836,6 @@ module_init(netxen_init_module); static void __exit netxen_exit_module(void) { pci_unregister_driver(&netxen_driver); - destroy_workqueue(netxen_workq); } module_exit(netxen_exit_module); From 232e7d68d50c9ac3a55d716e5ae215ecd1e043b9 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Thu, 13 Aug 2009 07:03:01 +0000 Subject: [PATCH 091/338] netxen: free napi resources during detach o Defer napi resouce allocation to device attach. o Free napi resources and delete napi during detach. This ensures right behavior across firmware reset. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 7 ------ drivers/net/netxen/netxen_nic_main.c | 32 +++++++++++++++++++++------- 2 files changed, 24 insertions(+), 15 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 7acf204e38c9..5d3343ef3d86 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -184,13 +184,6 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter) kfree(recv_ctx->rds_rings); skip_rds: - if (recv_ctx->sds_rings == NULL) - goto skip_sds; - - for(ring = 0; ring < adapter->max_sds_rings; ring++) - recv_ctx->sds_rings[ring].consumer = 0; - -skip_sds: if (adapter->tx_ring == NULL) return; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index d24e1cb93a26..28f270f5ac78 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -167,6 +167,8 @@ netxen_free_sds_rings(struct netxen_recv_context *recv_ctx) { if (recv_ctx->sds_rings != NULL) kfree(recv_ctx->sds_rings); + + recv_ctx->sds_rings = NULL; } static int @@ -188,6 +190,21 @@ netxen_napi_add(struct netxen_adapter *adapter, struct net_device *netdev) return 0; } +static void +netxen_napi_del(struct netxen_adapter *adapter) +{ + int ring; + struct nx_host_sds_ring *sds_ring; + struct netxen_recv_context *recv_ctx = &adapter->recv_ctx; + + for (ring = 0; ring < adapter->max_sds_rings; ring++) { + sds_ring = &recv_ctx->sds_rings[ring]; + netif_napi_del(&sds_ring->napi); + } + + netxen_free_sds_rings(&adapter->recv_ctx); +} + static void netxen_napi_enable(struct netxen_adapter *adapter) { @@ -889,10 +906,12 @@ netxen_nic_attach(struct netxen_adapter *adapter) struct nx_host_tx_ring *tx_ring; err = netxen_init_firmware(adapter); - if (err != 0) { - printk(KERN_ERR "Failed to init firmware\n"); - return -EIO; - } + if (err) + return err; + + err = netxen_napi_add(adapter, netdev); + if (err) + return err; if (adapter->fw_major < 4) adapter->max_rds_rings = 3; @@ -956,6 +975,7 @@ netxen_nic_detach(struct netxen_adapter *adapter) netxen_free_hw_resources(adapter); netxen_release_rx_buffers(adapter); netxen_nic_free_irq(adapter); + netxen_napi_del(adapter); netxen_free_sw_resources(adapter); adapter->is_up = 0; @@ -1100,9 +1120,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netdev->irq = adapter->msix_entries[0].vector; - if (netxen_napi_add(adapter, netdev)) - goto err_out_disable_msi; - init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = &netxen_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; @@ -1183,7 +1200,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) netxen_free_adapter_offload(adapter); netxen_teardown_intr(adapter); - netxen_free_sds_rings(&adapter->recv_ctx); netxen_cleanup_pci_map(adapter); From 5b766182a110311fbf618f736bc8a8f2f7ce3f4c Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Wed, 22 Jul 2009 17:20:50 -0300 Subject: [PATCH 092/338] V4L/DVB (12330): pxa_camera: Fix Oops in pxa_camera_probe mclk_get_divisor uses pcdev->soc_host.dev, make sure it is initialized. Signed-off-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 46e0d8ad880f..e048d25798cc 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1579,6 +1579,7 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev) pcdev->mclk = 20000000; } + pcdev->soc_host.dev = &pdev->dev; pcdev->mclk_divisor = mclk_get_divisor(pcdev); INIT_LIST_HEAD(&pcdev->capture); @@ -1644,7 +1645,6 @@ static int __devinit pxa_camera_probe(struct platform_device *pdev) pcdev->soc_host.drv_name = PXA_CAM_DRV_NAME; pcdev->soc_host.ops = &pxa_soc_camera_host_ops; pcdev->soc_host.priv = pcdev; - pcdev->soc_host.dev = &pdev->dev; pcdev->soc_host.nr = pdev->id; err = soc_camera_host_register(&pcdev->soc_host); From ed18d0c87ee0ab6e0985d83c19cd135b1bd54998 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Jul 2009 21:46:57 -0300 Subject: [PATCH 093/338] V4L/DVB (12337): ivtv: Read buffer overflow This mistakenly tests against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Signed-off-by: Roel Kluin Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-controls.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c index a3b77ed3f089..4a9c8ce0ecb3 100644 --- a/drivers/media/video/ivtv/ivtv-controls.c +++ b/drivers/media/video/ivtv/ivtv-controls.c @@ -17,6 +17,7 @@ along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include #include "ivtv-driver.h" #include "ivtv-cards.h" @@ -281,7 +282,7 @@ int ivtv_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) idx = p.audio_properties & 0x03; /* The audio clock of the digitizer must match the codec sample rate otherwise you get some very strange effects. */ - if (idx < sizeof(freqs)) + if (idx < ARRAY_SIZE(freqs)) ivtv_call_all(itv, audio, s_clock_freq, freqs[idx]); return err; } From 225aeb1c5863bc92c6bb1f921e9a6cf4d15dbb2a Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 23 Jul 2009 21:51:29 -0300 Subject: [PATCH 094/338] V4L/DVB (12338): cx18: Read buffer overflow This mistakenly tested against sizeof(freqs) instead of the array size. Due to the mask the only illegal value possible was 3. Reported-by: Roel Kluin Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-controls.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 5136df198338..93f0dae01350 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -20,6 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA * 02111-1307 USA */ +#include #include "cx18-driver.h" #include "cx18-cards.h" @@ -317,7 +318,7 @@ int cx18_s_ext_ctrls(struct file *file, void *fh, struct v4l2_ext_controls *c) idx = p.audio_properties & 0x03; /* The audio clock of the digitizer must match the codec sample rate otherwise you get some very strange effects. */ - if (idx < sizeof(freqs)) + if (idx < ARRAY_SIZE(freqs)) cx18_call_all(cx, audio, s_clock_freq, freqs[idx]); return err; } From 296544e15a7126373851abd40acc526b79b91432 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 27 Jul 2009 08:24:29 -0300 Subject: [PATCH 095/338] V4L/DVB (12340): mtv9v011: Add a missing chip version to the driver Some mt9v011 webcams report 0x8332 chip version, instead of 0x8243. From the revision history at the mt9v011 datasheet, it seems that the chip version has changed from the first release of the chip. Thanks-to hermann pitton for pointing this to me, on his tests with a Silvercrest webcam. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 3 ++- drivers/media/video/mt9v011.c | 14 +++++++++----- drivers/media/video/mt9v011.h | 3 ++- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 320f1f60276e..bc213a1f9c1f 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1771,7 +1771,8 @@ static int em28xx_hint_sensor(struct em28xx *dev) version = be16_to_cpu(version_be); switch (version) { - case 0x8243: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */ + case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; sensor_name = "mt9v011"; dev->em28xx_sensor = EM28XX_MT9V011; diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index b2260de645f0..c14bf47d6928 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -393,10 +393,13 @@ static int mt9v011_s_register(struct v4l2_subdev *sd, static int mt9v011_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip) { + u16 version; struct i2c_client *client = v4l2_get_subdevdata(sd); + version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); + return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011, - MT9V011_VERSION); + version); } static const struct v4l2_subdev_core_ops mt9v011_core_ops = { @@ -449,8 +452,9 @@ static int mt9v011_probe(struct i2c_client *c, /* Check if the sensor is really a MT9V011 */ version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION); - if (version != MT9V011_VERSION) { - v4l2_info(sd, "*** unknown micron chip detected (0x%04x.\n", + if ((version != MT9V011_VERSION) && + (version != MT9V011_REV_B_VERSION)) { + v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n", version); kfree(core); return -EINVAL; @@ -461,8 +465,8 @@ static int mt9v011_probe(struct i2c_client *c, core->height = 480; core->xtal = 27000000; /* Hz */ - v4l_info(c, "chip found @ 0x%02x (%s)\n", - c->addr << 1, c->adapter->name); + v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", + c->addr << 1, c->adapter->name, version); return 0; } diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h index 9e443ee30558..3350fd6083c3 100644 --- a/drivers/media/video/mt9v011.h +++ b/drivers/media/video/mt9v011.h @@ -30,6 +30,7 @@ #define R35_MT9V011_GLOBAL_GAIN 0x35 #define RF1_MT9V011_CHIP_ENABLE 0xf1 -#define MT9V011_VERSION 0x8243 +#define MT9V011_VERSION 0x8232 +#define MT9V011_REV_B_VERSION 0x8243 #endif From 458f9aa391efd34867f8cabac2e2f1af00cbc562 Mon Sep 17 00:00:00 2001 From: Jan Nikitenko Date: Thu, 18 Jun 2009 08:11:57 -0300 Subject: [PATCH 096/338] V4L/DVB (12341): zl10353 and qt1010: fix stack corruption bug Fixes stack corruption bug present in dump_regs function of zl10353 and qt1010 drivers: the buffer buf was one byte smaller than required - there are 4 chars for address prefix, 16 * 3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 were provided. The one byte missing in stack based buffer buf can cause stack corruption possibly leading to kernel oops, as discovered originally with af9015 driver (af9015: fix stack corruption bug). Signed-off-by: Jan Nikitenko Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/qt1010.c | 12 +++++------- drivers/media/dvb/frontends/zl10353.c | 12 +++++------- 2 files changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/media/common/tuners/qt1010.c b/drivers/media/common/tuners/qt1010.c index 825aa1412e6f..9f5dba244cb8 100644 --- a/drivers/media/common/tuners/qt1010.c +++ b/drivers/media/common/tuners/qt1010.c @@ -64,24 +64,22 @@ static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val) /* dump all registers */ static void qt1010_dump_regs(struct qt1010_priv *priv) { - char buf[52], buf2[4]; u8 reg, val; for (reg = 0; ; reg++) { if (reg % 16 == 0) { if (reg) - printk("%s\n", buf); - sprintf(buf, "%02x: ", reg); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "%02x:", reg); } if (qt1010_readreg(priv, reg, &val) == 0) - sprintf(buf2, "%02x ", val); + printk(KERN_CONT " %02x", val); else - strcpy(buf2, "-- "); - strcat(buf, buf2); + printk(KERN_CONT " --"); if (reg == 0x2f) break; } - printk("%s\n", buf); + printk(KERN_CONT "\n"); } static int qt1010_set_params(struct dvb_frontend *fe, diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c index 148b6f7f6cb2..66f5c1fb3074 100644 --- a/drivers/media/dvb/frontends/zl10353.c +++ b/drivers/media/dvb/frontends/zl10353.c @@ -98,7 +98,6 @@ static int zl10353_read_register(struct zl10353_state *state, u8 reg) static void zl10353_dump_regs(struct dvb_frontend *fe) { struct zl10353_state *state = fe->demodulator_priv; - char buf[52], buf2[4]; int ret; u8 reg; @@ -106,19 +105,18 @@ static void zl10353_dump_regs(struct dvb_frontend *fe) for (reg = 0; ; reg++) { if (reg % 16 == 0) { if (reg) - printk(KERN_DEBUG "%s\n", buf); - sprintf(buf, "%02x: ", reg); + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "%02x:", reg); } ret = zl10353_read_register(state, reg); if (ret >= 0) - sprintf(buf2, "%02x ", (u8)ret); + printk(KERN_CONT " %02x", (u8)ret); else - strcpy(buf2, "-- "); - strcat(buf, buf2); + printk(KERN_CONT " --"); if (reg == 0xff) break; } - printk(KERN_DEBUG "%s\n", buf); + printk(KERN_CONT "\n"); } static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, From 0a6e44d1beb30813f62ad376a31694e637858328 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 29 Jul 2009 01:39:12 -0300 Subject: [PATCH 097/338] V4L/DVB (12344): em28xx: fix support for Plextor ConvertX PX-TV100U This device uses msp34xx and uses 2.048 MHz frequency for I2S communication. Thanks to Angelo Cano for pointing the issues with this device and proposing an approach for fixing the issue. Tested-by: Angelo Cano Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index bc213a1f9c1f..d0b033bce867 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -622,22 +622,27 @@ struct em28xx_board em28xx_boards[] = { }, [EM2861_BOARD_PLEXTOR_PX_TV100U] = { .name = "Plextor ConvertX PX-TV100U", - .valid = EM28XX_BOARD_NOT_VALIDATED, .tuner_type = TUNER_TNF_5335MF, + .xclk = EM28XX_XCLK_I2S_MSB_TIMING | + EM28XX_XCLK_FREQUENCY_12MHZ, .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_TVP5150, + .has_msp34xx = 1, .input = { { .type = EM28XX_VMUX_TELEVISION, .vmux = TVP5150_COMPOSITE0, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_COMPOSITE1, .vmux = TVP5150_COMPOSITE1, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, }, { .type = EM28XX_VMUX_SVIDEO, .vmux = TVP5150_SVIDEO, .amux = EM28XX_AMUX_LINE_IN, + .gpio = pinnacle_hybrid_pro_analog, } }, }, @@ -1877,9 +1882,8 @@ void em28xx_pre_card_setup(struct em28xx *dev) /* request some modules */ switch (dev->model) { case EM2861_BOARD_PLEXTOR_PX_TV100U: - /* FIXME guess */ - /* Turn on analog audio output */ - em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd); + /* Sets the msp34xx I2S speed */ + dev->i2s_speed = 2048000; break; case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2880_BOARD_KWORLD_DVB_305U: From 337ab6d34f0be7cfbfb5ac8cb651276fc58aa20d Mon Sep 17 00:00:00 2001 From: Sohail Syyed Date: Sun, 26 Jul 2009 11:06:20 -0300 Subject: [PATCH 098/338] V4L/DVB (12349): cx88: HVR1300 ensure switching from Encoder to DVB-T and back is reliable Current tip is broken and does not switch back to DVB-T correctly Signed-off-by: Sohail Syyed Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-mpeg.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index da4e3912cd37..7172dcf2a4fa 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -116,6 +116,10 @@ static int cx8802_start_dma(struct cx8802_dev *dev, udelay(100); break; case CX88_BOARD_HAUPPAUGE_HVR1300: + /* Enable MPEG parallel IO and video signal pins */ + cx_write(MO_PINMUX_IO, 0x88); + cx_write(TS_SOP_STAT, 0); + cx_write(TS_VALERR_CNTRL, 0); break; case CX88_BOARD_PINNACLE_PCTV_HD_800i: /* Enable MPEG parallel IO and video signal pins */ From 6655be0f4f377d7e249219c6031c4be3533604a2 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 20 Jul 2009 12:20:58 -0300 Subject: [PATCH 099/338] V4L/DVB (12362): cx23885-417: fix manipulation of tvnorms Currently, the VIDIOC_S_STD ioctl just returns -EINVAL regardless of the norm passed. This patch sets cx23885_mpeg_template.tvnorms and cx23885_mpeg_template.current_norm so that the VIDIOC_S_STD will work. Thanks to Joseph Yasi for pointing this out, even though this particular fix was already pushed into a development repository, merge priority of this changeset has been escalated as a result of Joseph posting this identical patch. Signed-off-by: Michael Krufky Signed-off-by: Joseph A. Yasi Reviewed-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-417.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index e0cf21e0b1bf..1a1048b18f70 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1715,6 +1715,8 @@ static struct video_device cx23885_mpeg_template = { .fops = &mpeg_fops, .ioctl_ops = &mpeg_ioctl_ops, .minor = -1, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, }; void cx23885_417_unregister(struct cx23885_dev *dev) From ba1bc64272f0af668690ba2bf859b13172db7230 Mon Sep 17 00:00:00 2001 From: Nils Kassube Date: Tue, 28 Jul 2009 11:54:52 -0300 Subject: [PATCH 100/338] V4L/DVB (12371): af9015: Fix for crash in dvb-usb-af9015 Moving BOOT fixes problem. Signed-off-by: Nils Kassube Acked-by: Antti Palosaari Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 4cb31e7c13c2..26690dfb3260 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -81,7 +81,6 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) switch (req->cmd) { case GET_CONFIG: - case BOOT: case READ_MEMORY: case RECONNECT_USB: case GET_IR_CODE: @@ -100,6 +99,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) case WRITE_VIRTUAL_MEMORY: case COPY_FIRMWARE: case DOWNLOAD_FIRMWARE: + case BOOT: break; default: err("unknown command:%d", req->cmd); From 261982f17051d10a1054a77ec8ae13517e0acee2 Mon Sep 17 00:00:00 2001 From: Brian Johnson Date: Sun, 19 Jul 2009 15:58:56 -0300 Subject: [PATCH 101/338] V4L/DVB (12373a): Add gspca sn9c20x subdriver entry to MAINTAINERS file MAINTAINERS | 8 ++++++++ Signed-off-by: Brian Johnson Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index b1114cfac6bf..2c4326c0de9a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2238,6 +2238,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/pac207.c +GSPCA SN9C20X SUBDRIVER +P: Brian Johnson +M: brijohn@gmail.com +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +S: Maintained +F: drivers/media/video/gspca/sn9c20x.c + GSPCA T613 SUBDRIVER M: Leandro Costantino L: linux-media@vger.kernel.org From d1ae4e1d05cc982b6b480c1a3d69b8bb231e3493 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 12 Jul 2009 18:25:45 -0300 Subject: [PATCH 102/338] V4L/DVB (12374): sms1xxx: fix broken Hauppauge devices The current GPIO configuration breaks all Hauppauge devices. The code being removed affects Hauppauge devices only, and is the cause of the breakage. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 100 ---------------------------- 1 file changed, 100 deletions(-) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index d8b15d583bde..76bd3cb82d9f 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -124,91 +124,15 @@ int sms_board_event(struct smscore_device_t *coredev, switch (gevent) { case BOARD_EVENT_POWER_INIT: /* including hotplug */ - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - /* set I/O and turn off all LEDs */ - smscore_gpio_configure(coredev, - board->board_cfg.leds_power, - &MyGpioConfig); - smscore_gpio_set_level(coredev, - board->board_cfg.leds_power, 0); - smscore_gpio_configure(coredev, board->board_cfg.led0, - &MyGpioConfig); - smscore_gpio_set_level(coredev, - board->board_cfg.led0, 0); - smscore_gpio_configure(coredev, board->board_cfg.led1, - &MyGpioConfig); - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - /* set I/O and turn off LNA */ - smscore_gpio_configure(coredev, - board->board_cfg.foreign_lna0_ctrl, - &MyGpioConfig); - smscore_gpio_set_level(coredev, - board->board_cfg.foreign_lna0_ctrl, - 0); - break; - } break; /* BOARD_EVENT_BIND */ case BOARD_EVENT_POWER_SUSPEND: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.leds_power, 0); - smscore_gpio_set_level(coredev, - board->board_cfg.led0, 0); - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - smscore_gpio_set_level(coredev, - board->board_cfg.foreign_lna0_ctrl, - 0); - break; - } break; /* BOARD_EVENT_POWER_SUSPEND */ case BOARD_EVENT_POWER_RESUME: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.leds_power, 1); - smscore_gpio_set_level(coredev, - board->board_cfg.led0, 1); - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - smscore_gpio_set_level(coredev, - board->board_cfg.foreign_lna0_ctrl, - 1); - break; - } break; /* BOARD_EVENT_POWER_RESUME */ case BOARD_EVENT_BIND: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.leds_power, 1); - smscore_gpio_set_level(coredev, - board->board_cfg.led0, 1); - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2: - case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD: - smscore_gpio_set_level(coredev, - board->board_cfg.foreign_lna0_ctrl, - 1); - break; - } break; /* BOARD_EVENT_BIND */ case BOARD_EVENT_SCAN_PROG: @@ -218,20 +142,8 @@ int sms_board_event(struct smscore_device_t *coredev, case BOARD_EVENT_EMERGENCY_WARNING_SIGNAL: break; /* BOARD_EVENT_EMERGENCY_WARNING_SIGNAL */ case BOARD_EVENT_FE_LOCK: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 1); - break; - } break; /* BOARD_EVENT_FE_LOCK */ case BOARD_EVENT_FE_UNLOCK: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - } break; /* BOARD_EVENT_FE_UNLOCK */ case BOARD_EVENT_DEMOD_LOCK: break; /* BOARD_EVENT_DEMOD_LOCK */ @@ -248,20 +160,8 @@ int sms_board_event(struct smscore_device_t *coredev, case BOARD_EVENT_RECEPTION_LOST_0: break; /* BOARD_EVENT_RECEPTION_LOST_0 */ case BOARD_EVENT_MULTIPLEX_OK: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 1); - break; - } break; /* BOARD_EVENT_MULTIPLEX_OK */ case BOARD_EVENT_MULTIPLEX_ERRORS: - switch (board_id) { - case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM: - smscore_gpio_set_level(coredev, - board->board_cfg.led1, 0); - break; - } break; /* BOARD_EVENT_MULTIPLEX_ERRORS */ default: From d79cd8393ae85ebaf53a8fc93491eea96522d68e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sun, 19 Jul 2009 19:16:05 -0300 Subject: [PATCH 103/338] V4L/DVB (12328): uvcvideo: Don't apply the FIX_BANDWIDTH quirk to all ViMicro devices Commit 50144aeeb702ea105697ae5249f059ea3990b838 broke the Samsung NC10 netbook webcam. Instead of applying the FIX_BANDWIDTH quirk to all ViMicro devices, list the devices explicitly. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 89927b7aec28..04b47832fa0a 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1845,11 +1845,29 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_STREAM_NO_FID }, - /* ViMicro */ - { .match_flags = USB_DEVICE_ID_MATCH_VENDOR + /* ViMicro Vega */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x0ac8, - .idProduct = 0x0000, + .idProduct = 0x332d, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_FIX_BANDWIDTH }, + /* ViMicro - Minoru3D */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0ac8, + .idProduct = 0x3410, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_FIX_BANDWIDTH }, + /* ViMicro Venus - Minoru3D */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0ac8, + .idProduct = 0x3420, .bInterfaceClass = USB_CLASS_VIDEO, .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, From bd0232c13419b7ce51e02942082ff6af231e0f84 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Sat, 1 Aug 2009 18:14:24 -0300 Subject: [PATCH 104/338] V4L/DVB (12380): uvcvideo: Avoid flooding the kernel log with "unknown event type" messages The iSight sends non-UVC status events through the interrupt endpoint. Those invalid events are reported to the kernel log, resulting in a log flood. Only log the events when the UVC_TRACE_STATUS flag is set. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_status.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c index f152a9903862..1ca6dff73612 100644 --- a/drivers/media/video/uvc/uvc_status.c +++ b/drivers/media/video/uvc/uvc_status.c @@ -145,8 +145,8 @@ static void uvc_status_complete(struct urb *urb) break; default: - uvc_printk(KERN_INFO, "unknown event type %u.\n", - dev->status[0]); + uvc_trace(UVC_TRACE_STATUS, "Unknown status event " + "type %u.\n", dev->status[0]); break; } } From 79a6382551507ce196c3b4296e32b5386cdfbf15 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 2 Aug 2009 12:37:34 -0300 Subject: [PATCH 105/338] V4L/DVB (12386): sms1xxx: fix build warning: unused variable 'board' Remove the following build warning: sms-cards.c: In function 'sms_board_event': sms-cards.c:120: warning: unused variable 'board' Thanks to Hans Verkuil for pointing this out. The problem code has been #if 0'd for now, this will likely be used again in the future, once the event interface is complete. Cc: Hans Verkuil Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/sms-cards.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 76bd3cb82d9f..0420e2885e75 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -116,8 +116,6 @@ static inline void sms_gpio_assign_11xx_default_led_config( int sms_board_event(struct smscore_device_t *coredev, enum SMS_BOARD_EVENTS gevent) { - int board_id = smscore_get_board_id(coredev); - struct sms_board *board = sms_get_board(board_id); struct smscore_gpio_config MyGpioConfig; sms_gpio_assign_11xx_default_led_config(&MyGpioConfig); From b5f05064b556da5183adc383e5f8d50af0392849 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 3 Aug 2009 16:51:33 -0300 Subject: [PATCH 106/338] V4L/DVB (12390): saa7134: Use correct product name for Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 20 ++++++++++---------- drivers/media/video/saa7134/saa7134-dvb.c | 2 +- drivers/media/video/saa7134/saa7134.h | 2 +- 4 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 15562427e8a9..a82b767f9e7a 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -153,7 +153,7 @@ 152 -> Asus Tiger Rev:1.00 [1043:4857] 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] 154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] -155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708] +155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708] 156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] 157 -> Avermedia AVerTV Studio 507UA [1461:a11b] 158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 06861b782b95..60e74ad59679 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3331,8 +3331,8 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x0200100, }, }, - [SAA7134_BOARD_HAUPPAUGE_HVR1120] = { - .name = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid", + [SAA7134_BOARD_HAUPPAUGE_HVR1150] = { + .name = "Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, @@ -5862,7 +5862,7 @@ struct pci_device_id saa7134_pci_tbl[] = { .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x0070, .subdevice = 0x6706, - .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -5874,7 +5874,7 @@ struct pci_device_id saa7134_pci_tbl[] = { .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x0070, .subdevice = 0x6708, - .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1150, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -6363,7 +6363,7 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, switch (command) { case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */ switch (dev->board) { - case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_HAUPPAUGE_HVR1150: case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg); break; @@ -6384,7 +6384,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, int ret; switch (dev->board) { - case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_HAUPPAUGE_HVR1150: case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: /* tda8290 + tda18271 */ ret = saa7134_tda8290_18271_callback(dev, command, arg); @@ -6427,7 +6427,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) switch (tv.model) { case 67019: /* WinTV-HVR1110 (Retail, IR Blaster, hybrid, FM, SVid/Comp, 3.5mm audio in) */ case 67109: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */ - case 67201: /* WinTV-HVR1120 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */ + case 67201: /* WinTV-HVR1150 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */ case 67301: /* WinTV-HVR1000 (Retail, IR Receive, analog, no FM, SVid/Comp, 3.5mm audio in) */ case 67209: /* WinTV-HVR1110 (Retail, IR Receive, hybrid, FM, SVid/Comp, 3.5mm audio in) */ case 67559: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ @@ -6435,7 +6435,7 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data) case 67579: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM) */ case 67589: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */ case 67599: /* WinTV-HVR1110 (OEM, no IR, hybrid, no FM, SVid/Comp, RCA aud) */ - case 67651: /* WinTV-HVR1120 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ + case 67651: /* WinTV-HVR1150 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */ break; default: @@ -6625,7 +6625,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00); break; - case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_HAUPPAUGE_HVR1150: case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: /* GPIO 26 high for digital, low for analog */ saa7134_set_gpio(dev, 26, 0); @@ -6891,7 +6891,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) dev->name, saa7134_boards[dev->board].name); } break; - case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_HAUPPAUGE_HVR1150: case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: hauppauge_eeprom(dev, dev->eedata+0x80); break; diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 31930f26ffc7..ae0a7ecc46d9 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1147,7 +1147,7 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_1) < 0) goto dettach_frontend; break; - case SAA7134_BOARD_HAUPPAUGE_HVR1120: + case SAA7134_BOARD_HAUPPAUGE_HVR1150: fe0->dvb.frontend = dvb_attach(lgdt3305_attach, &hcw_lgdt3305_config, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 82268848f26a..bad5b237f21f 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -278,7 +278,7 @@ struct saa7134_format { #define SAA7134_BOARD_ASUSTeK_TIGER 152 #define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154 -#define SAA7134_BOARD_HAUPPAUGE_HVR1120 155 +#define SAA7134_BOARD_HAUPPAUGE_HVR1150 155 #define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156 #define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157 #define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158 From 0e316ecfc851c8dd955d9fa6e0d3a46e451a46f4 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 3 Aug 2009 16:51:33 -0300 Subject: [PATCH 107/338] V4L/DVB (12391): saa7134: Use correct product name for Hauppauge WinTV-HVR1120 DVB-T/Hybrid Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.saa7134 | 2 +- drivers/media/video/saa7134/saa7134-cards.c | 18 +++++++++--------- drivers/media/video/saa7134/saa7134-dvb.c | 2 +- drivers/media/video/saa7134/saa7134.h | 2 +- 4 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index a82b767f9e7a..c913e5614195 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -154,7 +154,7 @@ 153 -> Kworld Plus TV Analog Lite PCI [17de:7128] 154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d] 155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid [0070:6706,0070:6708] -156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] +156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid [0070:6707,0070:6709,0070:670a] 157 -> Avermedia AVerTV Studio 507UA [1461:a11b] 158 -> AVerMedia Cardbus TV/Radio (E501R) [1461:b7e9] 159 -> Beholder BeholdTV 505 RDS [0000:505B] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 60e74ad59679..6eebe3ef97d3 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3363,8 +3363,8 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x0800100, /* GPIO 23 HI for FM */ }, }, - [SAA7134_BOARD_HAUPPAUGE_HVR1110R3] = { - .name = "Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid", + [SAA7134_BOARD_HAUPPAUGE_HVR1120] = { + .name = "Hauppauge WinTV-HVR1120 DVB-T/Hybrid", .audio_clock = 0x00187de7, .tuner_type = TUNER_PHILIPS_TDA8290, .radio_type = UNSET, @@ -5868,7 +5868,7 @@ struct pci_device_id saa7134_pci_tbl[] = { .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x0070, .subdevice = 0x6707, - .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -5880,13 +5880,13 @@ struct pci_device_id saa7134_pci_tbl[] = { .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x0070, .subdevice = 0x6709, - .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, .subvendor = 0x0070, .subdevice = 0x670a, - .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110R3, + .driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1120, },{ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7133, @@ -6364,7 +6364,7 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev, case TDA18271_CALLBACK_CMD_AGC_ENABLE: /* 0 */ switch (dev->board) { case SAA7134_BOARD_HAUPPAUGE_HVR1150: - case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg); break; default: @@ -6385,7 +6385,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, switch (dev->board) { case SAA7134_BOARD_HAUPPAUGE_HVR1150: - case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: /* tda8290 + tda18271 */ ret = saa7134_tda8290_18271_callback(dev, command, arg); break; @@ -6626,7 +6626,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_writeb (SAA7134_PRODUCTION_TEST_MODE, 0x00); break; case SAA7134_BOARD_HAUPPAUGE_HVR1150: - case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: /* GPIO 26 high for digital, low for analog */ saa7134_set_gpio(dev, 26, 0); msleep(1); @@ -6892,7 +6892,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) } break; case SAA7134_BOARD_HAUPPAUGE_HVR1150: - case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: hauppauge_eeprom(dev, dev->eedata+0x80); break; case SAA7134_BOARD_HAUPPAUGE_HVR1110: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index ae0a7ecc46d9..98f3efd1e944 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1119,7 +1119,7 @@ static int dvb_init(struct saa7134_dev *dev) &tda827x_cfg_2) < 0) goto dettach_frontend; break; - case SAA7134_BOARD_HAUPPAUGE_HVR1110R3: + case SAA7134_BOARD_HAUPPAUGE_HVR1120: fe0->dvb.frontend = dvb_attach(tda10048_attach, &hcw_tda10048_config, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index bad5b237f21f..fb564f14887c 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -279,7 +279,7 @@ struct saa7134_format { #define SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG 153 #define SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS 154 #define SAA7134_BOARD_HAUPPAUGE_HVR1150 155 -#define SAA7134_BOARD_HAUPPAUGE_HVR1110R3 156 +#define SAA7134_BOARD_HAUPPAUGE_HVR1120 156 #define SAA7134_BOARD_AVERMEDIA_STUDIO_507UA 157 #define SAA7134_BOARD_AVERMEDIA_CARDBUS_501 158 #define SAA7134_BOARD_BEHOLD_505RDS 159 From 11db906983fc6e996fcd10073843bd6f1b9a96c3 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 3 Aug 2009 22:40:16 -0300 Subject: [PATCH 108/338] V4L/DVB (12393): cx88: fix regression in tuning for Geniatech X8000 MT The introduction of the zl10353 i2c gate control broke support for the Geniatech board (which is not behind an i2 gate). Add the needed parameter. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-dvb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index c44e87600219..e237b507659b 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -501,6 +501,7 @@ static struct zl10353_config cx88_pinnacle_hybrid_pctv = { static struct zl10353_config cx88_geniatech_x8000_mt = { .demod_address = (0x1e >> 1), .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, }; static struct s5h1411_config dvico_fusionhdtv7_config = { From 93b999239c418cf5c668fd966ac2c5c27b8180dd Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 3 Aug 2009 22:52:59 -0300 Subject: [PATCH 109/338] V4L/DVB (12394): cx88: Disable xc3028 power management for Geniatech x8000 A user discovered that the Geniatech x8000 encountered a regression when the xc3028 power management was introduced. The xc3028 never recovers after setting the powerdown register, which is probably because the xc3028 reset GPIO is not properly configured. Since I do not have access to the hardware and thus cannot determine the correct GPIO configuration, just disable xc3028 power management on this board, which fixes the regression. Thanks to user "ritec" for reporting the issue and testing the fix. Cc: rictec Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tuner-xc2028.c | 4 ++-- drivers/media/common/tuners/tuner-xc2028.h | 1 + drivers/media/video/cx88/cx88-cards.c | 8 ++++++++ 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index aa20ce8cc668..f270e605da83 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -1119,8 +1119,8 @@ static int xc2028_sleep(struct dvb_frontend *fe) struct xc2028_data *priv = fe->tuner_priv; int rc = 0; - /* Avoid firmware reload on slow devices */ - if (no_poweroff) + /* Avoid firmware reload on slow devices or if PM disabled */ + if (no_poweroff || priv->ctrl.disable_power_mgmt) return 0; tuner_dbg("Putting xc2028/3028 into poweroff mode.\n"); diff --git a/drivers/media/common/tuners/tuner-xc2028.h b/drivers/media/common/tuners/tuner-xc2028.h index 19de7928a74e..a90c35d50add 100644 --- a/drivers/media/common/tuners/tuner-xc2028.h +++ b/drivers/media/common/tuners/tuner-xc2028.h @@ -38,6 +38,7 @@ struct xc2028_ctrl { unsigned int input1:1; unsigned int vhfbw7:1; unsigned int uhfbw8:1; + unsigned int disable_power_mgmt:1; unsigned int demod; enum firmware_type type:2; }; diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index a5cc1c1fc2d6..39465301ec94 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3003,6 +3003,14 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO: ctl->demod = XC3028_FE_OREN538; break; + case CX88_BOARD_GENIATECH_X8000_MT: + /* FIXME: For this board, the xc3028 never recovers after being + powered down (the reset GPIO probably is not set properly). + We don't have access to the hardware so we cannot determine + which GPIO is used for xc3028, so just disable power xc3028 + power management for now */ + ctl->disable_power_mgmt = 1; + break; case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL: case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME: case CX88_BOARD_PROLINK_PV_8000GT: From 83053f7fe3eb0b6b1634d24ede87f1daa01ae60c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 6 Aug 2009 21:03:35 -0300 Subject: [PATCH 110/338] V4L/DVB (12399): mt9v011: Add support for controlling frame rates Implement g_parm/s_parm ioctls. Those are used to check the current frame rate (in fps) and to set it to a value. In practice, there are only 15 possible different speeds, due to chip limits. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 89 ++++++++++++++++++++++++++++++++++- 1 file changed, 87 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index c14bf47d6928..8de1316a276d 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -156,7 +156,7 @@ static void set_balance(struct v4l2_subdev *sd) mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain); } -static void calc_fps(struct v4l2_subdev *sd) +static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator) { struct mt9v011 *core = to_mt9v011(sd); unsigned height, width, hblank, vblank, speed; @@ -179,6 +179,51 @@ static void calc_fps(struct v4l2_subdev *sd) v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n", tmp / 1000, tmp % 1000, t_time); + + if (numerator && denominator) { + *numerator = 1000; + *denominator = (u32)frames_per_ms; + } +} + +static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned height, width, hblank, vblank; + unsigned row_time, line_time; + u64 t_time, speed; + + /* Avoid bogus calculus */ + if (!numerator || !denominator) + return 0; + + height = mt9v011_read(sd, R03_MT9V011_HEIGHT); + width = mt9v011_read(sd, R04_MT9V011_WIDTH); + hblank = mt9v011_read(sd, R05_MT9V011_HBLANK); + vblank = mt9v011_read(sd, R06_MT9V011_VBLANK); + + row_time = width + 113 + hblank; + line_time = height + vblank + 1; + + t_time = core->xtal * ((u64)numerator); + /* round to the closest value */ + t_time += denominator / 2; + do_div(t_time, denominator); + + speed = t_time; + do_div(speed, row_time * line_time); + + /* Avoid having a negative value for speed */ + if (speed < 2) + speed = 0; + else + speed -= 2; + + /* Avoid speed overflow */ + if (speed > 15) + return 15; + + return (u16)speed; } static void set_res(struct v4l2_subdev *sd) @@ -207,7 +252,7 @@ static void set_res(struct v4l2_subdev *sd) mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height); mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height); - calc_fps(sd); + calc_fps(sd, NULL, NULL); }; static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) @@ -322,6 +367,44 @@ static int mt9v011_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) return 0; } +static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + memset(cp, 0, sizeof(struct v4l2_captureparm)); + cp->capability = V4L2_CAP_TIMEPERFRAME; + calc_fps(sd, + &cp->timeperframe.numerator, + &cp->timeperframe.denominator); + + return 0; +} + +static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms) +{ + struct v4l2_captureparm *cp = &parms->parm.capture; + struct v4l2_fract *tpf = &cp->timeperframe; + u16 speed; + + if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (cp->extendedmode != 0) + return -EINVAL; + + speed = calc_speed(sd, tpf->numerator, tpf->denominator); + + mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed); + v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed); + + /* Recalculate and update fps info */ + calc_fps(sd, &tpf->numerator, &tpf->denominator); + + return 0; +} + static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt) { struct v4l2_pix_format *pix = &fmt->fmt.pix; @@ -419,6 +502,8 @@ static const struct v4l2_subdev_video_ops mt9v011_video_ops = { .enum_fmt = mt9v011_enum_fmt, .try_fmt = mt9v011_try_fmt, .s_fmt = mt9v011_s_fmt, + .g_parm = mt9v011_g_parm, + .s_parm = mt9v011_s_parm, }; static const struct v4l2_subdev_ops mt9v011_ops = { From d96ecda63f41350dc93c17ccb72ea24511f207a9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 6 Aug 2009 21:53:59 -0300 Subject: [PATCH 111/338] V4L/DVB (12400): em28xx: Allow changing fps on webcams em28xx doesn't have temporal scaling. However, on webcams, sensors are capable of changing the output rate. So, VIDIOC_[G|S]_PARM ioctls should be passed to the sensor for it to properly set frame rate. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-video.c | 37 +++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index ff37b4c15f44..92ee9c644328 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -846,6 +846,41 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *norm) return 0; } +static int vidioc_g_parm(struct file *file, void *priv, + struct v4l2_streamparm *p) +{ + struct em28xx_fh *fh = priv; + struct em28xx *dev = fh->dev; + int rc = 0; + + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (dev->board.is_webcam) + rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, + video, g_parm, p); + else + v4l2_video_std_frame_period(dev->norm, + &p->parm.capture.timeperframe); + + return rc; +} + +static int vidioc_s_parm(struct file *file, void *priv, + struct v4l2_streamparm *p) +{ + struct em28xx_fh *fh = priv; + struct em28xx *dev = fh->dev; + + if (!dev->board.is_webcam) + return -EINVAL; + + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + return v4l2_device_call_until_err(&dev->v4l2_dev, 0, video, s_parm, p); +} + static const char *iname[] = { [EM28XX_VMUX_COMPOSITE1] = "Composite1", [EM28XX_VMUX_COMPOSITE2] = "Composite2", @@ -1885,6 +1920,8 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = { .vidioc_qbuf = vidioc_qbuf, .vidioc_dqbuf = vidioc_dqbuf, .vidioc_s_std = vidioc_s_std, + .vidioc_g_parm = vidioc_g_parm, + .vidioc_s_parm = vidioc_s_parm, .vidioc_enum_input = vidioc_enum_input, .vidioc_g_input = vidioc_g_input, .vidioc_s_input = vidioc_s_input, From 2526ea6e46e41322eb98ac0e9c616273402bd661 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Aug 2009 01:09:54 -0300 Subject: [PATCH 112/338] V4L/DVB (12401): m9v011: add vflip/hflip controls to control mirror/upside down Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9v011.c | 53 +++++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 8de1316a276d..cc85f77a5706 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -52,13 +52,34 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = { .step = 1, .default_value = 0, .flags = 0, - }, + }, { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, + .default_value = 0, + .flags = 0, + }, { + } }; struct mt9v011 { struct v4l2_subdev sd; unsigned width, height; unsigned xtal; + unsigned hflip:1; + unsigned vflip:1; u16 global_gain, red_bal, blue_bal; }; @@ -131,7 +152,6 @@ static const struct i2c_reg_value mt9v011_init_default[] = { { R0A_MT9V011_CLK_SPEED, 0x0000 }, { R1E_MT9V011_DIGITAL_ZOOM, 0x0000 }, - { R20_MT9V011_READ_MODE, 0x1000 }, { R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */ }; @@ -255,6 +275,20 @@ static void set_res(struct v4l2_subdev *sd) calc_fps(sd, NULL, NULL); }; +static void set_read_mode(struct v4l2_subdev *sd) +{ + struct mt9v011 *core = to_mt9v011(sd); + unsigned mode = 0x1000; + + if (core->hflip) + mode |= 0x4000; + + if (core->vflip) + mode |= 0x8000; + + mt9v011_write(sd, R20_MT9V011_READ_MODE, mode); +} + static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) { int i; @@ -265,6 +299,7 @@ static int mt9v011_reset(struct v4l2_subdev *sd, u32 val) set_balance(sd); set_res(sd); + set_read_mode(sd); return 0; }; @@ -285,6 +320,12 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) case V4L2_CID_BLUE_BALANCE: ctrl->value = core->blue_bal; return 0; + case V4L2_CID_HFLIP: + ctrl->value = core->hflip ? 1 : 0; + return 0; + case V4L2_CID_VFLIP: + ctrl->value = core->vflip ? 1 : 0; + return 0; } return -EINVAL; } @@ -333,6 +374,14 @@ static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) case V4L2_CID_BLUE_BALANCE: core->blue_bal = ctrl->value; break; + case V4L2_CID_HFLIP: + core->hflip = ctrl->value; + set_read_mode(sd); + return 0; + case V4L2_CID_VFLIP: + core->vflip = ctrl->value; + set_read_mode(sd); + return 0; default: return -EINVAL; } From 9b4e845c6cbca2bcbfdb87e4d005260604226f45 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Aug 2009 12:08:02 -0300 Subject: [PATCH 113/338] V4L/DVB (12402): em28xx: fix: some em2710 chips use a different vendor ID Thanks to hermann pitton for pointing this new variation. Tested-by: hermann pitton Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/CARDLIST.em28xx | 2 +- drivers/media/video/em28xx/em28xx-cards.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 68c236c01846..e352d754875c 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -1,5 +1,5 @@ 0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800] - 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] + 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883] 2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036] 3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208] 4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201] diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index d0b033bce867..6c35d789cd7e 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1549,6 +1549,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2750_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN }, + { USB_DEVICE(0xeb1a, 0x2710), + .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN }, { USB_DEVICE(0xeb1a, 0x2821), From d594317bdc716ccd8c8cf711e3827f9b6e0b766b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Aug 2009 12:13:31 -0300 Subject: [PATCH 114/338] V4L/DVB (12403): em28xx: properly reports some em2710 chips As reported by hermann pitton , some devices has a different chip id for em2710 (likely the older ones): em28xx: New device @ 480 Mbps (eb1a:2710, interface 0, class 0) em28xx #0: Identified as EM2710/EM2750/EM2751 webcam grabber (card=22) em28xx #0: em28xx chip ID = 17 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 5 ++++- drivers/media/video/em28xx/em28xx-reg.h | 3 ++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 6c35d789cd7e..c9e420e8a614 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1840,11 +1840,14 @@ void em28xx_pre_card_setup(struct em28xx *dev) dev->chip_id = rc; switch (dev->chip_id) { + case CHIP_ID_EM2710: + em28xx_info("chip ID is em2710\n"); + break; case CHIP_ID_EM2750: em28xx_info("chip ID is em2750\n"); break; case CHIP_ID_EM2820: - em28xx_info("chip ID is em2710 or em2820\n"); + em28xx_info("chip ID is em2820 (or em2710)\n"); break; case CHIP_ID_EM2840: em28xx_info("chip ID is em2840\n"); diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index a2676d63cfd0..6bf84bd787df 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -176,7 +176,8 @@ /* FIXME: Need to be populated with the other chip ID's */ enum em28xx_chip_id { - CHIP_ID_EM2820 = 18, /* Also used by em2710 */ + CHIP_ID_EM2710 = 17, + CHIP_ID_EM2820 = 18, /* Also used by some em2710 */ CHIP_ID_EM2840 = 20, CHIP_ID_EM2750 = 33, CHIP_ID_EM2860 = 34, From c2a6b54a9cf08d4ffeb75d70603c4a5d03ac97ad Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 8 Aug 2009 03:14:55 -0300 Subject: [PATCH 115/338] V4L/DVB (12406): em28xx: fix: don't do image interlacing on webcams Due to historical reasons, em28xx driver gets two consecutive frames and fold them into an unique framing, doing interlacing. While this works fine for TV images, this produces two bad effects with webcams: 1) webcam images are progressive. Merging two consecutive images produce interlacing artifacts on the image; 2) since the driver needs to get two frames, it reduces the maximum frame rate by two. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 +++ drivers/media/video/em28xx/em28xx-core.c | 5 ++- drivers/media/video/em28xx/em28xx-video.c | 40 ++++++++++++++++++----- drivers/media/video/em28xx/em28xx.h | 3 ++ 4 files changed, 42 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index c9e420e8a614..9011a498e5b3 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2502,6 +2502,10 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, if (em28xx_hint_sensor(dev) < 0) dev->board.is_webcam = 0; + /* It makes no sense to use de-interlacing mode on webcams */ + if (dev->board.is_webcam) + dev->progressive = 1; + /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 5b78e199abd1..339fffdf6bce 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -720,7 +720,10 @@ int em28xx_resolution_set(struct em28xx *dev) { int width, height; width = norm_maxw(dev); - height = norm_maxh(dev) >> 1; + height = norm_maxh(dev); + + if (!dev->progressive) + height >>= norm_maxh(dev); em28xx_set_outfmt(dev); diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 92ee9c644328..ab079d9256c4 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -194,15 +194,24 @@ static void em28xx_copy_video(struct em28xx *dev, startread = p; remain = len; - /* Interlaces frame */ - if (buf->top_field) + if (dev->progressive) fieldstart = outp; - else - fieldstart = outp + bytesperline; + else { + /* Interlaces two half frames */ + if (buf->top_field) + fieldstart = outp; + else + fieldstart = outp + bytesperline; + } linesdone = dma_q->pos / bytesperline; currlinedone = dma_q->pos % bytesperline; - offset = linesdone * bytesperline * 2 + currlinedone; + + if (dev->progressive) + offset = linesdone * bytesperline + currlinedone; + else + offset = linesdone * bytesperline * 2 + currlinedone; + startwrite = fieldstart + offset; lencopy = bytesperline - currlinedone; lencopy = lencopy > remain ? remain : lencopy; @@ -376,7 +385,7 @@ static inline int em28xx_isoc_copy(struct em28xx *dev, struct urb *urb) em28xx_isocdbg("Video frame %d, length=%i, %s\n", p[2], len, (p[2] & 1) ? "odd" : "even"); - if (!(p[2] & 1)) { + if (dev->progressive || !(p[2] & 1)) { if (buf != NULL) buffer_filled(dev, dma_q, buf); get_next_buf(dma_q, &buf); @@ -689,7 +698,10 @@ static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */ - f->fmt.pix.field = dev->interlaced ? + if (dev->progressive) + f->fmt.pix.field = V4L2_FIELD_NONE; + else + f->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; mutex_unlock(&dev->lock); @@ -753,7 +765,11 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, f->fmt.pix.bytesperline = (dev->width * fmt->depth + 7) >> 3; f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * height; f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; - f->fmt.pix.field = V4L2_FIELD_INTERLACED; + if (dev->progressive) + f->fmt.pix.field = V4L2_FIELD_NONE; + else + f->fmt.pix.field = dev->interlaced ? + V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP; return 0; } @@ -1659,6 +1675,7 @@ static int em28xx_v4l2_open(struct file *filp) struct em28xx *dev; enum v4l2_buf_type fh_type; struct em28xx_fh *fh; + enum v4l2_field field; dev = em28xx_get_device(minor, &fh_type, &radio); @@ -1700,8 +1717,13 @@ static int em28xx_v4l2_open(struct file *filp) dev->users++; + if (dev->progressive) + field = V4L2_FIELD_NONE; + else + field = V4L2_FIELD_INTERLACED; + videobuf_queue_vmalloc_init(&fh->vb_vidq, &em28xx_video_qops, - NULL, &dev->slock, fh->type, V4L2_FIELD_INTERLACED, + NULL, &dev->slock, fh->type, field, sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 45bd513f62dc..8c2dc38bca9f 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -484,6 +484,9 @@ struct em28xx { int sensor_xres, sensor_yres; int sensor_xtal; + /* Allows progressive (e. g. non-interlaced) mode */ + int progressive; + /* Vinmode/Vinctl used at the driver */ int vinmode, vinctl; From 970cff36c0850e8193ac1162e42c7c11001b872d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 8 Aug 2009 03:28:41 -0300 Subject: [PATCH 116/338] V4L/DVB (12407): em28xx: Adjust Silvercrest xtal frequency We don't know the xtal frequency of Silvercrest, but we need to have some value in order to allow controlling the frame rate frequency. The value is probably still wrong, since the manufacturer announces this device as being capable of 30fps, but the maximum we can get is 13.5 fps. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 9011a498e5b3..fc46032bfe27 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1785,7 +1785,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) dev->em28xx_sensor = EM28XX_MT9V011; dev->sensor_xres = 640; dev->sensor_yres = 480; - dev->sensor_xtal = 6300000; + dev->sensor_xtal = 12150000; /* probably means GRGB 16 bit bayer */ dev->vinmode = 0x0d; From fcd20e3c369caf7a3fec300c9c183b25a06e21b2 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Aug 2009 02:57:57 -0300 Subject: [PATCH 117/338] V4L/DVB (12410): em28xx: Move the non-board dependent part to be outside em28xx_pre_card_setup() em28xx_pre_card_setup() is meant to contain board-specific initialization. Also, as autodetection sometimes occur only after having i2c bus enabled, this function may need to be called later. Moving those setups to happen outside the function avoids calling it twice without need and without duplicating output lines at dmesg. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 111 +++++++++++----------- 1 file changed, 53 insertions(+), 58 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index fc46032bfe27..6b2b5d3e2fad 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1821,63 +1821,6 @@ static int em28xx_hint_sensor(struct em28xx *dev) */ void em28xx_pre_card_setup(struct em28xx *dev) { - int rc; - - em28xx_set_model(dev); - - em28xx_info("Identified as %s (card=%d)\n", - dev->board.name, dev->model); - - /* Set the default GPO/GPIO for legacy devices */ - dev->reg_gpo_num = EM2880_R04_GPO; - dev->reg_gpio_num = EM28XX_R08_GPIO; - - dev->wait_after_write = 5; - - /* Based on the Chip ID, set the device configuration */ - rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); - if (rc > 0) { - dev->chip_id = rc; - - switch (dev->chip_id) { - case CHIP_ID_EM2710: - em28xx_info("chip ID is em2710\n"); - break; - case CHIP_ID_EM2750: - em28xx_info("chip ID is em2750\n"); - break; - case CHIP_ID_EM2820: - em28xx_info("chip ID is em2820 (or em2710)\n"); - break; - case CHIP_ID_EM2840: - em28xx_info("chip ID is em2840\n"); - break; - case CHIP_ID_EM2860: - em28xx_info("chip ID is em2860\n"); - break; - case CHIP_ID_EM2870: - em28xx_info("chip ID is em2870\n"); - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2874: - em28xx_info("chip ID is em2874\n"); - dev->reg_gpio_num = EM2874_R80_GPIO; - dev->wait_after_write = 0; - break; - case CHIP_ID_EM2883: - em28xx_info("chip ID is em2882/em2883\n"); - dev->wait_after_write = 0; - break; - default: - em28xx_info("em28xx chip ID = %d\n", dev->chip_id); - } - } - - /* Prepopulate cached GPO register content */ - rc = em28xx_read_reg(dev, dev->reg_gpo_num); - if (rc >= 0) - dev->reg_gpo = rc; - /* Set the initial XCLK and I2C clock values based on the board definition */ em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); @@ -2443,7 +2386,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, int minor) { struct em28xx *dev = *devhandle; - int retval = -ENOMEM; + int retval; int errCode; dev->udev = udev; @@ -2460,6 +2403,58 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->em28xx_read_reg_req = em28xx_read_reg_req; dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; + em28xx_set_model(dev); + + /* Set the default GPO/GPIO for legacy devices */ + dev->reg_gpo_num = EM2880_R04_GPO; + dev->reg_gpio_num = EM28XX_R08_GPIO; + + dev->wait_after_write = 5; + + /* Based on the Chip ID, set the device configuration */ + retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); + if (retval > 0) { + dev->chip_id = retval; + + switch (dev->chip_id) { + case CHIP_ID_EM2710: + em28xx_info("chip ID is em2710\n"); + break; + case CHIP_ID_EM2750: + em28xx_info("chip ID is em2750\n"); + break; + case CHIP_ID_EM2820: + em28xx_info("chip ID is em2820 (or em2710)\n"); + break; + case CHIP_ID_EM2840: + em28xx_info("chip ID is em2840\n"); + break; + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; + case CHIP_ID_EM2870: + em28xx_info("chip ID is em2870\n"); + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2874: + em28xx_info("chip ID is em2874\n"); + dev->reg_gpio_num = EM2874_R80_GPIO; + dev->wait_after_write = 0; + break; + case CHIP_ID_EM2883: + em28xx_info("chip ID is em2882/em2883\n"); + dev->wait_after_write = 0; + break; + default: + em28xx_info("em28xx chip ID = %d\n", dev->chip_id); + } + } + + /* Prepopulate cached GPO register content */ + retval = em28xx_read_reg(dev, dev->reg_gpo_num); + if (retval >= 0) + dev->reg_gpo = retval; + em28xx_pre_card_setup(dev); if (!dev->board.is_em2800) { From 3d3215c4e4cfca74e5805a8506d50a6752172e81 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Aug 2009 10:29:27 -0300 Subject: [PATCH 118/338] V4L/DVB (12411): em28xx: Fix artifacts with Silvercrest webcam Silvercrest mt9v011 sensor produces a 640x480 image. However, previously, the code were getting only half of the lines and merging two consecutive frames to "produce" a 640x480 image. With the addition of progressive mode, now em28xx is working with a full image. However, when the number of lines is bigger than 240, the beginning of some odd lines are filled with blank. After lots of testing, and physically checking the device for a Xtal, it was noticed experimentally that mt9v011 is using em28xx XCLK as its clock. Due to that, changing XCLK value changes the maximum speed of the stream. At the tests, it were possible to produce up to 32 fps, using a 30 MHz XCLK. However, at that rate, the artifacts happen even at 320x240. Lower values of XCLK produces artifacts only at 640x480. At some values of xclk (for example XCLKK = 6 MHz, 640x480), it is possible to see an invalid sucession of artifacts with this pattern: .xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx .xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ..xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ...xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx ....xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (where the dots represent the blanked pixels) So, it seems that a waveform in the format of a ramp is interferring at the image. The cause of this interference is currently unknown. Some possibilities are: - electrical interference (maybe this device is broken?); - some issue at mt9v011 programming; - some bug at em28xx chip. So, for now, let's be conservative and use a value of XCLK that we know for sure that it won't cause artifacts. As I'm waiting for more of such devices with different em28xx chipset revisions, I'll have the opportunity to double check the issue with other pieces of hardware. Later patches can vary XCLK depending on the vertical resolutions, if a proper fix is not discovered. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 50 +++++++++++++++-------- 1 file changed, 34 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 6b2b5d3e2fad..54429b629b2d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -218,7 +218,7 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = { struct em28xx_board em28xx_boards[] = { [EM2750_BOARD_UNKNOWN] = { .name = "EM2710/EM2750/EM2751 webcam grabber", - .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, + .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, .tuner_type = TUNER_ABSENT, .is_webcam = 1, .input = { { @@ -1768,6 +1768,7 @@ static int em28xx_hint_sensor(struct em28xx *dev) __be16 version_be; u16 version; + /* Micron sensor detection */ dev->i2c_client.addr = 0xba >> 1; cmd = 0; i2c_master_send(&dev->i2c_client, &cmd, 1); @@ -1776,16 +1777,27 @@ static int em28xx_hint_sensor(struct em28xx *dev) return -EINVAL; version = be16_to_cpu(version_be); - switch (version) { case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */ case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */ dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; + em28xx_set_model(dev); + sensor_name = "mt9v011"; dev->em28xx_sensor = EM28XX_MT9V011; dev->sensor_xres = 640; dev->sensor_yres = 480; - dev->sensor_xtal = 12150000; + /* + * FIXME: mt9v011 uses I2S speed as xtal clk - at least with + * the Silvercrest cam I have here for testing - for higher + * resolutions, a high clock cause horizontal artifacts, so we + * need to use a lower xclk frequency. + * Yet, it would be possible to adjust xclk depending on the + * desired resolution, since this affects directly the + * frame rate. + */ + dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ; + dev->sensor_xtal = 4300000; /* probably means GRGB 16 bit bayer */ dev->vinmode = 0x0d; @@ -1794,6 +1806,8 @@ static int em28xx_hint_sensor(struct em28xx *dev) break; case 0x8431: dev->model = EM2750_BOARD_UNKNOWN; + em28xx_set_model(dev); + sensor_name = "mt9m001"; dev->em28xx_sensor = EM28XX_MT9M001; em28xx_initialize_mt9m001(dev); @@ -1810,6 +1824,9 @@ static int em28xx_hint_sensor(struct em28xx *dev) return -EINVAL; } + /* Setup webcam defaults */ + em28xx_pre_card_setup(dev); + em28xx_errdev("Sensor is %s, using model %s entry.\n", sensor_name, em28xx_boards[dev->model].name); @@ -2169,7 +2186,20 @@ void em28xx_register_i2c_ir(struct em28xx *dev) void em28xx_card_setup(struct em28xx *dev) { - em28xx_set_model(dev); + /* + * If the device can be a webcam, seek for a sensor. + * If sensor is not found, then it isn't a webcam. + */ + if (dev->board.is_webcam) { + if (em28xx_hint_sensor(dev) < 0) + dev->board.is_webcam = 0; + else + dev->progressive = 1; + } else + em28xx_set_model(dev); + + em28xx_info("Identified as %s (card=%d)\n", + dev->board.name, dev->model); dev->tuner_type = em28xx_boards[dev->model].tuner_type; if (em28xx_boards[dev->model].tuner_addr) @@ -2489,18 +2519,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->vinmode = 0x10; dev->vinctl = 0x11; - /* - * If the device can be a webcam, seek for a sensor. - * If sensor is not found, then it isn't a webcam. - */ - if (dev->board.is_webcam) - if (em28xx_hint_sensor(dev) < 0) - dev->board.is_webcam = 0; - - /* It makes no sense to use de-interlacing mode on webcams */ - if (dev->board.is_webcam) - dev->progressive = 1; - /* Do board specific init and eeprom reading */ em28xx_card_setup(dev); From d7612c86d099939503c2f849a523dbca753d1935 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Aug 2009 18:43:00 -0300 Subject: [PATCH 119/338] V4L/DVB (12405): em28xx-cards: move register 0x13 setting to the proper place Register 0x13 seems to be a sort of image control, maybe gamma, white level or black level. Lower values produce better images, while higher values increases the contrast and shifts colors to green. 0xff produces a black image. This register is not Silvercrest-specific, so its code should be moved to a better place. If this register is left alone, a random value can be found at the register, producing weird results. While here, let's remove register 0x0d, as it had no noticed effect at the image. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 4 ---- drivers/media/video/em28xx/em28xx-core.c | 3 +++ 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 54429b629b2d..ed281f565945 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2273,10 +2273,6 @@ void em28xx_card_setup(struct em28xx *dev) em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_set_mode(dev, EM28XX_ANALOG_MODE); break; - case EM2820_BOARD_SILVERCREST_WEBCAM: - /* FIXME: need to document the registers bellow */ - em28xx_write_reg(dev, 0x0d, 0x42); - em28xx_write_reg(dev, 0x13, 0x08); } if (dev->board.has_snapshot_button) diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 339fffdf6bce..98e140b5d95e 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -632,6 +632,9 @@ int em28xx_capture_start(struct em28xx *dev, int start) return rc; } + if (dev->board.is_webcam) + rc = em28xx_write_reg(dev, 0x13, 0x0c); + /* enable video capture */ rc = em28xx_write_reg(dev, 0x48, 0x00); From 7d2e2e35fb50f381c9398e481aac1e1729765ae3 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 5 Aug 2009 12:58:47 -0300 Subject: [PATCH 120/338] V4L/DVB (12422): media/zr364xx: fix build errors Fix build errors in zr364xx by adding selects: zr364xx.c:(.text+0x195ed7): undefined reference to `videobuf_streamon' zr364xx.c:(.text+0x196030): undefined reference to `videobuf_dqbuf' zr364xx.c:(.text+0x1960c4): undefined reference to `videobuf_qbuf' zr364xx.c:(.text+0x196123): undefined reference to `videobuf_querybuf' zr364xx.c:(.text+0x196182): undefined reference to `videobuf_reqbufs' zr364xx.c:(.text+0x196224): undefined reference to `videobuf_queue_is_busy' zr364xx.c:(.text+0x196390): undefined reference to `videobuf_vmalloc_free' zr364xx.c:(.text+0x196571): undefined reference to `videobuf_iolock' zr364xx.c:(.text+0x196678): undefined reference to `videobuf_mmap_mapper' zr364xx.c:(.text+0x196760): undefined reference to `videobuf_poll_stream' zr364xx.c:(.text+0x19689a): undefined reference to `videobuf_read_one' zr364xx.c:(.text+0x1969ec): undefined reference to `videobuf_mmap_free' zr364xx.c:(.text+0x197862): undefined reference to `videobuf_queue_vmalloc_init' zr364xx.c:(.text+0x197a28): undefined reference to `videobuf_streamoff' zr364xx.c:(.text+0x198203): undefined reference to `videobuf_to_vmalloc' zr364xx.c:(.text+0x198603): undefined reference to `videobuf_streamoff' drivers/built-in.o: In function `free_buffer': zr364xx.c:(.text+0x19930c): undefined reference to `videobuf_vmalloc_free' drivers/built-in.o: In function `zr364xx_open': zr364xx.c:(.text+0x19a7de): undefined reference to `videobuf_queue_vmalloc_init' drivers/built-in.o: In function `read_pipe_completion': zr364xx.c:(.text+0x19b17f): undefined reference to `videobuf_to_vmalloc' Signed-off-by: Randy Dunlap Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 84b6fc15519d..dcf9fa9264bb 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -920,6 +920,8 @@ source "drivers/media/video/pwc/Kconfig" config USB_ZR364XX tristate "USB ZR364XX Camera support" depends on VIDEO_V4L2 + select VIDEOBUF_GEN + select VIDEOBUF_VMALLOC ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. From 2dd54a54c19d0e5b50f4e1c591653772ead9d4a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 5 Aug 2009 20:06:31 -0300 Subject: [PATCH 121/338] V4L/DVB (12424): soc-camera: fix recursive locking in .buf_queue() The .buf_queue() V4L2 driver method is called under spinlock_irqsave(q->irqlock,...), don't take the lock again inside the function. Reported-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 6 +----- drivers/media/video/mx3_camera.c | 19 ++++++++++--------- drivers/media/video/pxa_camera.c | 6 +----- drivers/media/video/sh_mobile_ceu_camera.c | 5 +---- 4 files changed, 13 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 2d075205bdfe..736c31d23194 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -234,6 +234,7 @@ static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev) return ret; } +/* Called under spinlock_irqsave(&pcdev->lock, ...) */ static void mx1_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { @@ -241,13 +242,10 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq, struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct mx1_camera_dev *pcdev = ici->priv; struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb); - unsigned long flags; dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); - spin_lock_irqsave(&pcdev->lock, flags); - list_add_tail(&vb->queue, &pcdev->capture); vb->state = VIDEOBUF_ACTIVE; @@ -264,8 +262,6 @@ static void mx1_videobuf_queue(struct videobuf_queue *vq, __raw_writel(temp, pcdev->base + CSICR1); } } - - spin_unlock_irqrestore(&pcdev->lock, flags); } static void mx1_videobuf_release(struct videobuf_queue *vq, diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index e605c076ed89..9770cb7932ca 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -332,7 +332,10 @@ static enum pixel_fmt fourcc_to_ipu_pix(__u32 fourcc) } } -/* Called with .vb_lock held */ +/* + * Called with .vb_lock mutex held and + * under spinlock_irqsave(&mx3_cam->lock, ...) + */ static void mx3_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { @@ -346,7 +349,8 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq, struct idmac_video_param *video = &ichan->params.video; const struct soc_camera_data_format *data_fmt = icd->current_fmt; dma_cookie_t cookie; - unsigned long flags; + + BUG_ON(!irqs_disabled()); /* This is the configuration of one sg-element */ video->out_pixel_fmt = fourcc_to_ipu_pix(data_fmt->fourcc); @@ -359,8 +363,6 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq, memset((void *)vb->baddr, 0xaa, vb->bsize); #endif - spin_lock_irqsave(&mx3_cam->lock, flags); - list_add_tail(&vb->queue, &mx3_cam->capture); if (!mx3_cam->active) { @@ -370,24 +372,23 @@ static void mx3_videobuf_queue(struct videobuf_queue *vq, vb->state = VIDEOBUF_QUEUED; } - spin_unlock_irqrestore(&mx3_cam->lock, flags); + spin_unlock_irq(&mx3_cam->lock); cookie = txd->tx_submit(txd); dev_dbg(&icd->dev, "Submitted cookie %d DMA 0x%08x\n", cookie, sg_dma_address(&buf->sg)); + + spin_lock_irq(&mx3_cam->lock); + if (cookie >= 0) return; /* Submit error */ vb->state = VIDEOBUF_PREPARED; - spin_lock_irqsave(&mx3_cam->lock, flags); - list_del_init(&vb->queue); if (mx3_cam->active == buf) mx3_cam->active = NULL; - - spin_unlock_irqrestore(&mx3_cam->lock, flags); } /* Called with .vb_lock held */ diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index e048d25798cc..016bb45ba0c3 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -612,6 +612,7 @@ static void pxa_camera_stop_capture(struct pxa_camera_dev *pcdev) dev_dbg(pcdev->soc_host.dev, "%s\n", __func__); } +/* Called under spinlock_irqsave(&pcdev->lock, ...) */ static void pxa_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { @@ -619,13 +620,10 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq, struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct pxa_camera_dev *pcdev = ici->priv; struct pxa_buffer *buf = container_of(vb, struct pxa_buffer, vb); - unsigned long flags; dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d active=%p\n", __func__, vb, vb->baddr, vb->bsize, pcdev->active); - spin_lock_irqsave(&pcdev->lock, flags); - list_add_tail(&vb->queue, &pcdev->capture); vb->state = VIDEOBUF_ACTIVE; @@ -633,8 +631,6 @@ static void pxa_videobuf_queue(struct videobuf_queue *vq, if (!pcdev->active) pxa_camera_start_capture(pcdev); - - spin_unlock_irqrestore(&pcdev->lock, flags); } static void pxa_videobuf_release(struct videobuf_queue *vq, diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 0db88a53d92c..e86878deea71 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -282,27 +282,24 @@ out: return ret; } +/* Called under spinlock_irqsave(&pcdev->lock, ...) */ static void sh_mobile_ceu_videobuf_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) { struct soc_camera_device *icd = vq->priv_data; struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct sh_mobile_ceu_dev *pcdev = ici->priv; - unsigned long flags; dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__, vb, vb->baddr, vb->bsize); vb->state = VIDEOBUF_QUEUED; - spin_lock_irqsave(&pcdev->lock, flags); list_add_tail(&vb->queue, &pcdev->capture); if (!pcdev->active) { pcdev->active = vb; sh_mobile_ceu_capture(pcdev); } - - spin_unlock_irqrestore(&pcdev->lock, flags); } static void sh_mobile_ceu_videobuf_release(struct videobuf_queue *vq, From 99362e1ece9f9651af1b849a01d91b9df1e0db2c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Aug 2009 07:10:52 -0300 Subject: [PATCH 122/338] V4L/DVB (12428): hdpvr: add missing initialization of current_norm Drivers should either set current_norm or supply a g_std callback. The hdpvr driver does neither. Since it initializes to a 60 Hz format I've initialized the current_norm to NTSC | PAL_M | PAL_60 which is the 60 Hz subset of tvnorms. Cc: Janne Grunau Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-video.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index ccd47f57f42c..d678765cbba2 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -1220,6 +1220,8 @@ static const struct video_device hdpvr_video_template = { V4L2_STD_PAL_G | V4L2_STD_PAL_H | V4L2_STD_PAL_I | V4L2_STD_PAL_D | V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_60, + .current_norm = V4L2_STD_NTSC | V4L2_STD_PAL_M | + V4L2_STD_PAL_60, }; int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent, From 9bedc7f7fe803c17d26b5fcf5786b50a7cf40def Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 7 Aug 2009 07:28:16 -0300 Subject: [PATCH 123/338] V4L/DVB (12429): v4l2-ioctl: fix G_STD and G_PARM default handlers The v4l core supplies default handlers for G_STD and G_PARM. However, both default handlers are buggy. This patch fixes the following: 1) If no g_std is supplied and current_norm == 0, then this driver does not support TV video standards (e.g. a radio or webcam driver). Return -EINVAL. This ensures that there is no bogus VIDIOC_G_STD support for such drivers. 2) The default VIDIOC_G_PARM handler used current_norm instead of first checking if the driver supported g_std and calling that to get the norm. It also didn't check if current_norm was 0, since in that case the driver does not support TV standards (or no standard was set at all) and the default handler should return -EINVAL. Note that I am very unhappy with these default handlers: I think they basically behave like some very strange and unexpected side-effect. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index be64a502ea27..f2afc4e08379 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1081,8 +1081,10 @@ static long __video_do_ioctl(struct file *file, /* Calls the specific handler */ if (ops->vidioc_g_std) ret = ops->vidioc_g_std(file, fh, id); - else + else if (vfd->current_norm) *id = vfd->current_norm; + else + ret = -EINVAL; if (!ret) dbgarg(cmd, "std=0x%08Lx\n", (long long unsigned)*id); @@ -1553,12 +1555,19 @@ static long __video_do_ioctl(struct file *file, break; ret = ops->vidioc_g_parm(file, fh, p); } else { + v4l2_std_id std = vfd->current_norm; + if (p->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - v4l2_video_std_frame_period(vfd->current_norm, - &p->parm.capture.timeperframe); ret = 0; + if (ops->vidioc_g_std) + ret = ops->vidioc_g_std(file, fh, &std); + else if (std == 0) + ret = -EINVAL; + if (ret == 0) + v4l2_video_std_frame_period(std, + &p->parm.capture.timeperframe); } dbgarg(cmd, "type=%d\n", p->type); From 01a5fd6ff3fbae9a599d3334a8cca0f00865e360 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Fri, 7 Aug 2009 09:25:06 -0300 Subject: [PATCH 124/338] V4L/DVB (12432): em28xx: fix regression in Empire DualTV digital tuning Restore support for digital tuning caused by regression during introduction of disable_i2c_gate parameter to zl10353 driver. Thanks to user "Xwang" for reporting the problem and testing the fix Cc: Xwang Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index cf0ac7f2a30d..d603575431b4 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -478,7 +478,6 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_KWORLD_DVB_310U: - case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_with_xc3028, &dev->i2c_adap); @@ -488,6 +487,7 @@ static int dvb_init(struct em28xx *dev) } break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_EMPIRE_DUAL_TV: dvb->frontend = dvb_attach(zl10353_attach, &em28xx_zl10353_xc3028_no_i2c_gate, &dev->i2c_adap); From 77f2c2db1146154fb054e9ce955928a66d8c959f Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 10 Aug 2009 22:17:25 -0300 Subject: [PATCH 125/338] V4L/DVB (12436): stk-webcam: read buffer overflow It tested the value of stk_sizes[i].m before checking whether i was in range. Cc: Hans Verkuil Cc: Trent Piepho Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/stk-webcam.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index 4d6785e63455..b154bd961e3b 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -1050,8 +1050,8 @@ static int stk_setup_format(struct stk_camera *dev) depth = 1; else depth = 2; - while (stk_sizes[i].m != dev->vsettings.mode - && i < ARRAY_SIZE(stk_sizes)) + while (i < ARRAY_SIZE(stk_sizes) && + stk_sizes[i].m != dev->vsettings.mode) i++; if (i == ARRAY_SIZE(stk_sizes)) { STK_ERROR("Something is broken in %s\n", __func__); From 27059b35397fc7cf2cbf5b4b99d912bbc06aff4d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 10 Aug 2009 21:59:16 -0300 Subject: [PATCH 126/338] V4L/DVB (12437): dvb: siano uses/depends on INPUT siano uses input_*() functions so it should depend on INPUT to prevent build errors: ERROR: "input_event" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_free_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! Cc: Michael Krufky Cc: Uri Shkolnik Signed-off-by: Randy Dunlap Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig index dd863f261672..88847d1dcbb5 100644 --- a/drivers/media/dvb/siano/Kconfig +++ b/drivers/media/dvb/siano/Kconfig @@ -4,7 +4,7 @@ config DVB_SIANO_SMS1XXX tristate "Siano SMS1XXX USB dongle support" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT ---help--- Choose Y here if you have a USB dongle with a SMS1XXX chipset. From bb2b4542b6415044894cd7c147ff54840dd8ed3f Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 10 Aug 2009 22:07:54 -0300 Subject: [PATCH 127/338] V4L/DVB (12438): Read buffer overflow parport[n] is checked before n < MAX_CAMS Signed-off-by: Roel Kluin Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bw-qcam.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c index 10dbd4a11b30..9e39bc5f7b00 100644 --- a/drivers/media/video/bw-qcam.c +++ b/drivers/media/video/bw-qcam.c @@ -992,7 +992,7 @@ static int accept_bwqcam(struct parport *port) if (parport[0] && strncmp(parport[0], "auto", 4) != 0) { /* user gave parport parameters */ - for(n=0; parport[n] && n Date: Mon, 10 Aug 2009 22:51:01 -0300 Subject: [PATCH 128/338] V4L/DVB (12440): Use kzalloc for frontend states to have struct dvb_frontend properly This patch changes most frontend drivers to allocate their state structure via kzalloc and not kmalloc. This is done to properly initialize the embedded "struct dvb_frontend frontend" field, that they all have. The visible effect of this struct being uninitalized is, that the member "id" that is used to set the name of kernel thread is totally random. Some board drivers (for example cx88-dvb) set this "id" via videobuf_dvb_alloc_frontend but most do not. So I at least get random id values for saa7134, flexcop and ttpci based cards. It looks like this in dmesg: DVB: registering adapter 1 frontend -10551321 (ST STV0299 DVB-S) The related kernel thread then also gets a strange name like "kdvb-ad-1-fe--1". Cc: Michael Krufky Cc: Steven Toth Cc: Timothy Lee Cc: Igor M. Liplianin Signed-off-by: Matthias Schwarzott Acked-by: Andreas Oberritter Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cx22700.c | 2 +- drivers/media/dvb/frontends/cx22702.c | 2 +- drivers/media/dvb/frontends/cx24110.c | 2 +- drivers/media/dvb/frontends/dvb_dummy_fe.c | 6 +++--- drivers/media/dvb/frontends/l64781.c | 2 +- drivers/media/dvb/frontends/lgs8gl5.c | 2 +- drivers/media/dvb/frontends/mt312.c | 2 +- drivers/media/dvb/frontends/nxt6000.c | 2 +- drivers/media/dvb/frontends/or51132.c | 2 +- drivers/media/dvb/frontends/or51211.c | 2 +- drivers/media/dvb/frontends/s5h1409.c | 2 +- drivers/media/dvb/frontends/s5h1411.c | 2 +- drivers/media/dvb/frontends/si21xx.c | 2 +- drivers/media/dvb/frontends/sp8870.c | 2 +- drivers/media/dvb/frontends/sp887x.c | 2 +- drivers/media/dvb/frontends/stv0288.c | 2 +- drivers/media/dvb/frontends/stv0297.c | 2 +- drivers/media/dvb/frontends/stv0299.c | 2 +- drivers/media/dvb/frontends/tda10021.c | 2 +- drivers/media/dvb/frontends/tda10048.c | 2 +- drivers/media/dvb/frontends/tda1004x.c | 4 ++-- drivers/media/dvb/frontends/tda10086.c | 2 +- drivers/media/dvb/frontends/tda8083.c | 2 +- drivers/media/dvb/frontends/ves1820.c | 2 +- drivers/media/dvb/frontends/ves1x93.c | 2 +- 25 files changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c index ace5cb17165d..fbd838eca268 100644 --- a/drivers/media/dvb/frontends/cx22700.c +++ b/drivers/media/dvb/frontends/cx22700.c @@ -380,7 +380,7 @@ struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, struct cx22700_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL); + state = kzalloc(sizeof(struct cx22700_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index 5d1abe34bddb..00b5c7e91d5d 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -580,7 +580,7 @@ struct dvb_frontend *cx22702_attach(const struct cx22702_config *config, struct cx22702_state *state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); + state = kzalloc(sizeof(struct cx22702_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 87ae29db024f..ffbcfabd83f0 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -598,7 +598,7 @@ struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, int ret; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL); + state = kzalloc(sizeof(struct cx24110_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c index db8a937cc630..a7fc7e53a551 100644 --- a/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -117,7 +117,7 @@ struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void) struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* create dvb_frontend */ @@ -137,7 +137,7 @@ struct dvb_frontend *dvb_dummy_fe_qpsk_attach(void) struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* create dvb_frontend */ @@ -157,7 +157,7 @@ struct dvb_frontend *dvb_dummy_fe_qam_attach(void) struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kzalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* create dvb_frontend */ diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index e1e70e9e0cb9..3051b64aa17c 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -501,7 +501,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL); + state = kzalloc(sizeof(struct l64781_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c index 855852fddf22..bb37ed289a05 100644 --- a/drivers/media/dvb/frontends/lgs8gl5.c +++ b/drivers/media/dvb/frontends/lgs8gl5.c @@ -387,7 +387,7 @@ lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c) dprintk("%s\n", __func__); /* Allocate memory for the internal state */ - state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); + state = kzalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index a621f727935f..f69daaac78c9 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -782,7 +782,7 @@ struct dvb_frontend *mt312_attach(const struct mt312_config *config, struct mt312_state *state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); + state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c index 0eef22dbf8a0..a763ec756f7f 100644 --- a/drivers/media/dvb/frontends/nxt6000.c +++ b/drivers/media/dvb/frontends/nxt6000.c @@ -545,7 +545,7 @@ struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, struct nxt6000_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL); + state = kzalloc(sizeof(struct nxt6000_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index 8133ea3cddd7..38e67accb8c3 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -562,7 +562,7 @@ struct dvb_frontend* or51132_attach(const struct or51132_config* config, struct or51132_state* state = NULL; /* Allocate memory for the internal state */ - state = kmalloc(sizeof(struct or51132_state), GFP_KERNEL); + state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL); if (state == NULL) return NULL; diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c index 16cf2fdd5d7d..c709ce6771c8 100644 --- a/drivers/media/dvb/frontends/or51211.c +++ b/drivers/media/dvb/frontends/or51211.c @@ -527,7 +527,7 @@ struct dvb_frontend* or51211_attach(const struct or51211_config* config, struct or51211_state* state = NULL; /* Allocate memory for the internal state */ - state = kmalloc(sizeof(struct or51211_state), GFP_KERNEL); + state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL); if (state == NULL) return NULL; diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c index 3e08d985d6e5..fb3011518427 100644 --- a/drivers/media/dvb/frontends/s5h1409.c +++ b/drivers/media/dvb/frontends/s5h1409.c @@ -796,7 +796,7 @@ struct dvb_frontend *s5h1409_attach(const struct s5h1409_config *config, u16 reg; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct s5h1409_state), GFP_KERNEL); + state = kzalloc(sizeof(struct s5h1409_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 66e2dd6d6fe4..d8adf1e32019 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -844,7 +844,7 @@ struct dvb_frontend *s5h1411_attach(const struct s5h1411_config *config, u16 reg; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct s5h1411_state), GFP_KERNEL); + state = kzalloc(sizeof(struct s5h1411_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/si21xx.c b/drivers/media/dvb/frontends/si21xx.c index 0bd16af8a6cd..9552a22ccffb 100644 --- a/drivers/media/dvb/frontends/si21xx.c +++ b/drivers/media/dvb/frontends/si21xx.c @@ -928,7 +928,7 @@ struct dvb_frontend *si21xx_attach(const struct si21xx_config *config, dprintk("%s\n", __func__); /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct si21xx_state), GFP_KERNEL); + state = kzalloc(sizeof(struct si21xx_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c index 1c9a9b4051b9..b85eb60a893e 100644 --- a/drivers/media/dvb/frontends/sp8870.c +++ b/drivers/media/dvb/frontends/sp8870.c @@ -557,7 +557,7 @@ struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, struct sp8870_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL); + state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 559509ab4dab..4a7c3d842608 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -557,7 +557,7 @@ struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, struct sp887x_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL); + state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/stv0288.c b/drivers/media/dvb/frontends/stv0288.c index ff1194de34c0..2930a5d6768a 100644 --- a/drivers/media/dvb/frontends/stv0288.c +++ b/drivers/media/dvb/frontends/stv0288.c @@ -570,7 +570,7 @@ struct dvb_frontend *stv0288_attach(const struct stv0288_config *config, int id; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct stv0288_state), GFP_KERNEL); + state = kzalloc(sizeof(struct stv0288_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index 62caf802ed99..4fd7479bb62b 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -663,7 +663,7 @@ struct dvb_frontend *stv0297_attach(const struct stv0297_config *config, struct stv0297_state *state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL); + state = kzalloc(sizeof(struct stv0297_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 6c1cb1973c6e..968874469726 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -667,7 +667,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, int id; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL); + state = kzalloc(sizeof(struct stv0299_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index f648fdb64bb7..f5d7b3277a2f 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -413,7 +413,7 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, u8 id; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c index cc8862ce4aae..4e2a7c8b2f62 100644 --- a/drivers/media/dvb/frontends/tda10048.c +++ b/drivers/media/dvb/frontends/tda10048.c @@ -1095,7 +1095,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, dprintk(1, "%s()\n", __func__); /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10048_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 4981cef8b444..f2a8abe0a243 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1269,7 +1269,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, int id; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); if (!state) { printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); return NULL; @@ -1339,7 +1339,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, int id; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda1004x_state), GFP_KERNEL); if (!state) { printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); return NULL; diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c index a17ce3c4ad86..f2c8faac6f36 100644 --- a/drivers/media/dvb/frontends/tda10086.c +++ b/drivers/media/dvb/frontends/tda10086.c @@ -745,7 +745,7 @@ struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, dprintk ("%s\n", __func__); /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10086_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10086_state), GFP_KERNEL); if (!state) return NULL; diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c index 5b843b2e67e8..9369f7442f27 100644 --- a/drivers/media/dvb/frontends/tda8083.c +++ b/drivers/media/dvb/frontends/tda8083.c @@ -417,7 +417,7 @@ struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, struct tda8083_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda8083_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c index a184597f1d9b..6e78e4865515 100644 --- a/drivers/media/dvb/frontends/ves1820.c +++ b/drivers/media/dvb/frontends/ves1820.c @@ -374,7 +374,7 @@ struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, struct ves1820_state* state = NULL; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL); + state = kzalloc(sizeof(struct ves1820_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c index bd558960bd87..8d7854c2fb0c 100644 --- a/drivers/media/dvb/frontends/ves1x93.c +++ b/drivers/media/dvb/frontends/ves1x93.c @@ -456,7 +456,7 @@ struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, u8 identity; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL); + state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ From 08b39642b1e375afd014c50f6013ec4a292ca3b2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 10 Aug 2009 22:59:33 -0300 Subject: [PATCH 129/338] V4L/DVB (12441): siano: read buffer overflow With mode DEVICE_MODE_RAW_TUNER a read occurs past the end of smscore_fw_lkup[]. Subsequently an attempt is made to load the firmware from the resulting filename. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/smscoreapi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index a246903c3341..bd9ab9d0d12a 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -816,7 +816,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode) sms_debug("set device mode to %d", mode); if (coredev->device_flags & SMS_DEVICE_FAMILY2) { - if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) { + if (mode < DEVICE_MODE_DVBT || mode >= DEVICE_MODE_RAW_TUNER) { sms_err("invalid mode specified %d", mode); return -EINVAL; } From a219dc4d4463809b1be473038e7d9f3437ca452d Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Wed, 12 Aug 2009 23:55:56 +0800 Subject: [PATCH 130/338] ARM: S3C64XX: serial: Fix a typo in Kconfig The typo causes drivers/serial/s3c6400.c not being built for s3c6400 platform. Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 037c1e0b7c4c..6553833c12db 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -527,7 +527,7 @@ config SERIAL_S3C24A0 config SERIAL_S3C6400 tristate "Samsung S3C6400/S3C6410 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410) + depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410) default y help Serial port support for the Samsung S3C6400 and S3C6410 From 48ec45e725aa385d72bced73b267dfaf13351876 Mon Sep 17 00:00:00 2001 From: Davide Rizzo Date: Thu, 13 Aug 2009 11:53:53 +0200 Subject: [PATCH 131/338] ARM: S3C24XX: Fix clkout mpx error Bug correction: CLK Outputs cannot have XTAL as parent Signed-off-by: Davide Rizzo [ben-linux@fluff.org: updated patch subject] Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/clock-dclk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index 5b75a797b5ab..0afb217a775e 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) /* calculate the MISCCR setting for the clock */ - if (parent == &clk_xtal) + if (parent == &clk_mpll) source = S3C2410_MISCCR_CLK0_MPLL; else if (parent == &clk_upll) source = S3C2410_MISCCR_CLK0_UPLL; From 17e78b0655da20f2fc2bbde3b8252dac07c82914 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Thu, 13 Aug 2009 14:09:58 +0000 Subject: [PATCH 132/338] ixgbe: Do not return 0 in ixgbe_fcoe_ddp() upon FCP_RSP in DDP completion We return the ddp->len in ixgbe_fcoe_ddp() to indicate the length of data that have been DDPed. However, it is possible that the length is 0, e.g., for SCSI READ, the FCP_RSP may come back w/ SCSI status 0x28 as Task Set Full with no FCP data for DDP. In ixgbe_fcoe_ddp(), we return 0 to indicate not passing DDPed packets to upper layer. Therefore in the case of ddp->len being 0 upon FCP_RSP, we do not want to return the 0 ddp->len as we want FCP_RSP to be always delivered to the upper layer. This patch fixes this bug by setting rc only if ddp->len is non-zero. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c index fa9f24e23683..28cf104e36cc 100644 --- a/drivers/net/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ixgbe/ixgbe_fcoe.c @@ -336,7 +336,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, /* return 0 to bypass going to ULD for DDPed data */ if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP) rc = 0; - else + else if (ddp->len) rc = ddp->len; } From 8a62babfb87aa5911e87e0ce38381bdfdc4a2b83 Mon Sep 17 00:00:00 2001 From: Lucy Liu Date: Thu, 13 Aug 2009 14:09:38 +0000 Subject: [PATCH 133/338] ixgbe: Fix receive on real device when VLANs are configured Traffic received with a priority tag (VID = 0) and non-zero priority value was incorrectly handled by the VLAN packet code path due to a check on zero for the whole VLAN tag instead of just the VID. This patch masked out the priority field when checking the vlan tag for received VLAN packets. Signed-off-by: Lucy Liu Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index e3cb949b9aa9..77b0381a2b5c 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -492,12 +492,12 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector, skb_record_rx_queue(skb, ring->queue_index); if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) { - if (adapter->vlgrp && is_vlan && (tag != 0)) + if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK)) vlan_gro_receive(napi, adapter->vlgrp, tag, skb); else napi_gro_receive(napi, skb); } else { - if (adapter->vlgrp && is_vlan && (tag != 0)) + if (adapter->vlgrp && is_vlan && (tag & VLAN_VID_MASK)) vlan_hwaccel_rx(skb, adapter->vlgrp, tag); else netif_rx(skb); From d6647bdf98a0de19963de8d5d9698d469ed72097 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Jul 2009 17:11:50 +0900 Subject: [PATCH 134/338] init: set nr_cpu_ids before setup_per_cpu_areas() nr_cpu_ids is dependent only on cpu_possible_map and setup_per_cpu_areas() already depends on cpu_possible_map and will use nr_cpu_ids. Initialize nr_cpu_ids before setting up percpu areas. Signed-off-by: Tejun Heo --- init/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/main.c b/init/main.c index 2c5ade79eb81..2d9d6bdfe7c9 100644 --- a/init/main.c +++ b/init/main.c @@ -584,8 +584,8 @@ asmlinkage void __init start_kernel(void) setup_arch(&command_line); mm_init_owner(&init_mm, &init_task); setup_command_line(command_line); - setup_per_cpu_areas(); setup_nr_cpu_ids(); + setup_per_cpu_areas(); smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */ build_all_zonelists(); From 74d46d6b2d23d44d72c37df4c6a5d2e782f7b088 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 21 Jul 2009 17:11:50 +0900 Subject: [PATCH 135/338] percpu, sparc64: fix sparse possible cpu map handling percpu code has been assuming num_possible_cpus() == nr_cpu_ids which is incorrect if cpu_possible_map contains holes. This causes percpu code to access beyond allocated memories and vmalloc areas. On a sparc64 machine with cpus 0 and 2 (u60), this triggers the following warning or fails boot. WARNING: at /devel/tj/os/work/mm/vmalloc.c:106 vmap_page_range_noflush+0x1f0/0x240() Modules linked in: Call Trace: [00000000004b17d0] vmap_page_range_noflush+0x1f0/0x240 [00000000004b1840] map_vm_area+0x20/0x60 [00000000004b1950] __vmalloc_area_node+0xd0/0x160 [0000000000593434] deflate_init+0x14/0xe0 [0000000000583b94] __crypto_alloc_tfm+0xd4/0x1e0 [00000000005844f0] crypto_alloc_base+0x50/0xa0 [000000000058b898] alg_test_comp+0x18/0x80 [000000000058dad4] alg_test+0x54/0x180 [000000000058af00] cryptomgr_test+0x40/0x60 [0000000000473098] kthread+0x58/0x80 [000000000042b590] kernel_thread+0x30/0x60 [0000000000472fd0] kthreadd+0xf0/0x160 ---[ end trace 429b268a213317ba ]--- This patch fixes generic percpu functions and sparc64 setup_per_cpu_areas() so that they handle sparse cpu_possible_map properly. Please note that on x86, cpu_possible_map() doesn't contain holes and thus num_possible_cpus() == nr_cpu_ids and this patch doesn't cause any behavior difference. Signed-off-by: Tejun Heo Acked-by: David S. Miller Cc: Ingo Molnar --- arch/sparc/kernel/smp_64.c | 4 ++-- arch/x86/kernel/setup_percpu.c | 14 +++++++------- mm/percpu.c | 33 ++++++++++++++++++--------------- 3 files changed, 27 insertions(+), 24 deletions(-) diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index fa44eaf8d897..3691907a43b4 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -1499,7 +1499,7 @@ void __init setup_per_cpu_areas(void) dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE; - ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0])); + ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpur_ptrs[0])); pcpur_ptrs = alloc_bootmem(ptrs_size); for_each_possible_cpu(cpu) { @@ -1514,7 +1514,7 @@ void __init setup_per_cpu_areas(void) /* allocate address and map */ vm.flags = VM_ALLOC; - vm.size = num_possible_cpus() * PCPU_CHUNK_SIZE; + vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE; vm_area_register_early(&vm, PCPU_CHUNK_SIZE); for_each_possible_cpu(cpu) { diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 29a3eef7cf4a..07d81916f212 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -165,7 +165,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) if (!chosen) { size_t vm_size = VMALLOC_END - VMALLOC_START; - size_t tot_size = num_possible_cpus() * PMD_SIZE; + size_t tot_size = nr_cpu_ids * PMD_SIZE; /* on non-NUMA, embedding is better */ if (!pcpu_need_numa()) @@ -199,7 +199,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE; /* allocate pointer array and alloc large pages */ - map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0])); + map_size = PFN_ALIGN(nr_cpu_ids * sizeof(pcpul_map[0])); pcpul_map = alloc_bootmem(map_size); for_each_possible_cpu(cpu) { @@ -228,7 +228,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) /* allocate address and map */ pcpul_vm.flags = VM_ALLOC; - pcpul_vm.size = num_possible_cpus() * PMD_SIZE; + pcpul_vm.size = nr_cpu_ids * PMD_SIZE; vm_area_register_early(&pcpul_vm, PMD_SIZE); for_each_possible_cpu(cpu) { @@ -250,8 +250,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen) PMD_SIZE, pcpul_vm.addr, NULL); /* sort pcpul_map array for pcpu_lpage_remapped() */ - for (i = 0; i < num_possible_cpus() - 1; i++) - for (j = i + 1; j < num_possible_cpus(); j++) + for (i = 0; i < nr_cpu_ids - 1; i++) + for (j = i + 1; j < nr_cpu_ids; j++) if (pcpul_map[i].ptr > pcpul_map[j].ptr) { struct pcpul_ent tmp = pcpul_map[i]; pcpul_map[i] = pcpul_map[j]; @@ -288,7 +288,7 @@ void *pcpu_lpage_remapped(void *kaddr) { void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK); unsigned long offset = (unsigned long)kaddr & ~PMD_MASK; - int left = 0, right = num_possible_cpus() - 1; + int left = 0, right = nr_cpu_ids - 1; int pos; /* pcpul in use at all? */ @@ -377,7 +377,7 @@ static ssize_t __init setup_pcpu_4k(size_t static_size) pcpu4k_nr_static_pages = PFN_UP(static_size); /* unaligned allocations can't be freed, round up to page size */ - pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus() + pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * nr_cpu_ids * sizeof(pcpu4k_pages[0])); pcpu4k_pages = alloc_bootmem(pages_size); diff --git a/mm/percpu.c b/mm/percpu.c index b70f2acd8853..e0be1146f617 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -8,12 +8,12 @@ * * This is percpu allocator which can handle both static and dynamic * areas. Percpu areas are allocated in chunks in vmalloc area. Each - * chunk is consisted of num_possible_cpus() units and the first chunk - * is used for static percpu variables in the kernel image (special - * boot time alloc/init handling necessary as these areas need to be - * brought up before allocation services are running). Unit grows as - * necessary and all units grow or shrink in unison. When a chunk is - * filled up, another chunk is allocated. ie. in vmalloc area + * chunk is consisted of nr_cpu_ids units and the first chunk is used + * for static percpu variables in the kernel image (special boot time + * alloc/init handling necessary as these areas need to be brought up + * before allocation services are running). Unit grows as necessary + * and all units grow or shrink in unison. When a chunk is filled up, + * another chunk is allocated. ie. in vmalloc area * * c0 c1 c2 * ------------------- ------------------- ------------ @@ -558,7 +558,7 @@ static void pcpu_free_area(struct pcpu_chunk *chunk, int freeme) static void pcpu_unmap(struct pcpu_chunk *chunk, int page_start, int page_end, bool flush_tlb) { - unsigned int last = num_possible_cpus() - 1; + unsigned int last = nr_cpu_ids - 1; unsigned int cpu; /* unmap must not be done on immutable chunk */ @@ -643,7 +643,7 @@ static void pcpu_depopulate_chunk(struct pcpu_chunk *chunk, int off, int size, */ static int pcpu_map(struct pcpu_chunk *chunk, int page_start, int page_end) { - unsigned int last = num_possible_cpus() - 1; + unsigned int last = nr_cpu_ids - 1; unsigned int cpu; int err; @@ -1067,9 +1067,9 @@ size_t __init pcpu_setup_first_chunk(pcpu_get_page_fn_t get_page_fn, PFN_UP(size_sum)); pcpu_unit_size = pcpu_unit_pages << PAGE_SHIFT; - pcpu_chunk_size = num_possible_cpus() * pcpu_unit_size; + pcpu_chunk_size = nr_cpu_ids * pcpu_unit_size; pcpu_chunk_struct_size = sizeof(struct pcpu_chunk) - + num_possible_cpus() * pcpu_unit_pages * sizeof(struct page *); + + nr_cpu_ids * pcpu_unit_pages * sizeof(struct page *); if (dyn_size < 0) dyn_size = pcpu_unit_size - static_size - reserved_size; @@ -1248,7 +1248,7 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, } else pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE); - chunk_size = pcpue_unit_size * num_possible_cpus(); + chunk_size = pcpue_unit_size * nr_cpu_ids; pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); @@ -1259,12 +1259,15 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size, } /* return the leftover and copy */ - for_each_possible_cpu(cpu) { + for (cpu = 0; cpu < nr_cpu_ids; cpu++) { void *ptr = pcpue_ptr + cpu * pcpue_unit_size; - free_bootmem(__pa(ptr + pcpue_size), - pcpue_unit_size - pcpue_size); - memcpy(ptr, __per_cpu_load, static_size); + if (cpu_possible(cpu)) { + free_bootmem(__pa(ptr + pcpue_size), + pcpue_unit_size - pcpue_size); + memcpy(ptr, __per_cpu_load, static_size); + } else + free_bootmem(__pa(ptr), pcpue_unit_size); } /* we're ready, commit */ From 142d44b0dd6741a64a7bdbe029110e7c1dcf1d23 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Thu, 13 Aug 2009 02:00:13 -0400 Subject: [PATCH 136/338] percpu: use the right flag for get_vm_area() get_vm_area() only accepts VM_* flags, not GFP_*. And according to the doc of get_vm_area(), here should be VM_ALLOC. Signed-off-by: WANG Cong Acked-by: Tejun Heo Cc: Ingo Molnar --- mm/percpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/percpu.c b/mm/percpu.c index e0be1146f617..5fe37842e0ea 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -749,7 +749,7 @@ static struct pcpu_chunk *alloc_pcpu_chunk(void) chunk->map[chunk->map_used++] = pcpu_unit_size; chunk->page = chunk->page_ar; - chunk->vm = get_vm_area(pcpu_chunk_size, GFP_KERNEL); + chunk->vm = get_vm_area(pcpu_chunk_size, VM_ALLOC); if (!chunk->vm) { free_pcpu_chunk(chunk); return NULL; From 563abb4be1a79e7b64784d43beb9d0cacb1bad6f Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Tue, 11 Aug 2009 17:29:21 +0200 Subject: [PATCH 137/338] mx31moboard: invert sdhc ro signal sense Small confusion with our hardware engineer, the WP signal (RO) is active low on our boards, the signal has to inverted. This is a pretty straightforward patch, it could even go to -rc, but if not, then push it for 2.6.32. Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31moboard-devboard.c | 2 +- arch/arm/mach-mx3/mx31moboard-marxbot.c | 2 +- arch/arm/mach-mx3/mx31moboard.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 4704405165a1..b48581e7dedd 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = { static int devboard_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 641c3d6153ae..901fb0166c0e 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = { static int marxbot_sdhc2_get_ro(struct device *dev) { - return gpio_get_value(SDHC2_WP); + return !gpio_get_value(SDHC2_WP); } static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq, diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c index a17f2e411609..2a2da4739ecf 100644 --- a/arch/arm/mach-mx3/mx31moboard.c +++ b/arch/arm/mach-mx3/mx31moboard.c @@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = { static int moboard_sdhc1_get_ro(struct device *dev) { - return gpio_get_value(SDHC1_WP); + return !gpio_get_value(SDHC1_WP); } static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq, From d7e623da1a757fbd8c117fa29190ca8bef14dab3 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 11 Aug 2009 11:20:11 +0100 Subject: [PATCH 138/338] GFS2: Fix permissions on "recover" file Although this file is only ever written and not read by userspace, it seems that the utils are opening this file O_RDWR, so we need to allow that. Also fixes the whitespace which seemed to be broken. Signed-off-by: Steven Whitehouse Cc: David Teigland --- fs/gfs2/sys.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 23419dc3027b..a7cbfbd340c7 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -386,16 +386,16 @@ static ssize_t jid_show(struct gfs2_sbd *sdp, char *buf) #define GDLM_ATTR(_name,_mode,_show,_store) \ static struct gfs2_attr gdlm_attr_##_name = __ATTR(_name,_mode,_show,_store) -GDLM_ATTR(proto_name, 0444, proto_name_show, NULL); -GDLM_ATTR(block, 0644, block_show, block_store); -GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store); -GDLM_ATTR(id, 0444, lkid_show, NULL); -GDLM_ATTR(jid, 0444, jid_show, NULL); -GDLM_ATTR(first, 0444, lkfirst_show, NULL); -GDLM_ATTR(first_done, 0444, first_done_show, NULL); -GDLM_ATTR(recover, 0200, NULL, recover_store); -GDLM_ATTR(recover_done, 0444, recover_done_show, NULL); -GDLM_ATTR(recover_status, 0444, recover_status_show, NULL); +GDLM_ATTR(proto_name, 0444, proto_name_show, NULL); +GDLM_ATTR(block, 0644, block_show, block_store); +GDLM_ATTR(withdraw, 0644, withdraw_show, withdraw_store); +GDLM_ATTR(id, 0444, lkid_show, NULL); +GDLM_ATTR(jid, 0444, jid_show, NULL); +GDLM_ATTR(first, 0444, lkfirst_show, NULL); +GDLM_ATTR(first_done, 0444, first_done_show, NULL); +GDLM_ATTR(recover, 0600, NULL, recover_store); +GDLM_ATTR(recover_done, 0444, recover_done_show, NULL); +GDLM_ATTR(recover_status, 0444, recover_status_show, NULL); static struct attribute *lock_module_attrs[] = { &gdlm_attr_proto_name.attr, From 6b26dead3ce97d016b57724b01974d5ca5c84bd5 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 4 Aug 2009 17:48:16 -0400 Subject: [PATCH 139/338] rt2x00: fix memory corruption in rf cache, add a sanity check Change rt2x00_rf_read() and rt2x00_rf_write() to subtract 1 from the rf register number. This is needed because the rf registers are enumerated starting with one. The size of the rf register cache is just enough to hold all registers, so writing to the highest register was corrupting memory. Add a check to make sure that the rf register number is valid. Signed-off-by: Pavel Roskin Cc: stable@kernel.org Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index a498dde024e1..49c9e2c1433d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -849,13 +849,15 @@ struct rt2x00_dev { static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev, const unsigned int word, u32 *data) { - *data = rt2x00dev->rf[word]; + BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32)); + *data = rt2x00dev->rf[word - 1]; } static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, u32 data) { - rt2x00dev->rf[word] = data; + BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32)); + rt2x00dev->rf[word - 1] = data; } /* From 388ce4beb7135722c584b0af18f215e3ec657adf Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Fri, 14 Aug 2009 15:01:35 +0530 Subject: [PATCH 140/338] [SCSI] mpt2sas: fix config request and diag reset deadlock Moving the setting and clearing of the mutex's to _config_request. There was a mutex deadlock when diag reset is called from inside _config_request, so diag reset was moved to outside the mutexs. Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_config.c | 85 +++++++-------------------- 1 file changed, 20 insertions(+), 65 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 1c6658c60239..6ddee161beb3 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -236,12 +236,14 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t Mpi2ConfigRequest_t *config_request; int r; u8 retry_count; - u8 issue_reset; + u8 issue_host_reset = 0; u16 wait_state_count; + mutex_lock(&ioc->config_cmds.mutex); if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) { printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n", ioc->name, __func__); + mutex_unlock(&ioc->config_cmds.mutex); return -EAGAIN; } retry_count = 0; @@ -260,8 +262,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t printk(MPT2SAS_ERR_FMT "%s: failed due to ioc not operational\n", ioc->name, __func__); - ioc->config_cmds.status = MPT2_CMD_NOT_USED; - return -EFAULT; + r = -EFAULT; + goto out; } ssleep(1); ioc_state = mpt2sas_base_get_iocstate(ioc, 1); @@ -277,8 +279,8 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); - ioc->config_cmds.status = MPT2_CMD_NOT_USED; - return -EAGAIN; + r = -EAGAIN; + goto out; } r = 0; @@ -298,9 +300,15 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t ioc->name, __func__); _debug_dump_mf(mpi_request, sizeof(Mpi2ConfigRequest_t)/4); - if (!(ioc->config_cmds.status & MPT2_CMD_RESET)) - issue_reset = 1; - goto issue_host_reset; + retry_count++; + if (ioc->config_cmds.smid == smid) + mpt2sas_base_free_smid(ioc, smid); + if ((ioc->shost_recovery) || + (ioc->config_cmds.status & MPT2_CMD_RESET)) + goto retry_config; + issue_host_reset = 1; + r = -EFAULT; + goto out; } if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID) memcpy(mpi_reply, ioc->config_cmds.reply, @@ -308,21 +316,13 @@ _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t if (retry_count) printk(MPT2SAS_INFO_FMT "%s: retry completed!!\n", ioc->name, __func__); +out: ioc->config_cmds.status = MPT2_CMD_NOT_USED; - return r; - - issue_host_reset: - if (issue_reset) + mutex_unlock(&ioc->config_cmds.mutex); + if (issue_host_reset) mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); - ioc->config_cmds.status = MPT2_CMD_NOT_USED; - if (!retry_count) { - printk(MPT2SAS_INFO_FMT "%s: attempting retry\n", - ioc->name, __func__); - retry_count++; - goto retry_config; - } - return -EFAULT; + return r; } /** @@ -381,7 +381,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2ManufacturingPage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -423,7 +422,6 @@ mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -444,7 +442,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2BiosPage2_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -486,7 +483,6 @@ mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -507,7 +503,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2BiosPage3_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -549,7 +544,6 @@ mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -570,7 +564,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2IOUnitPage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -612,7 +605,6 @@ mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -633,7 +625,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2IOUnitPage1_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -675,7 +666,6 @@ mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -696,7 +686,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; @@ -738,7 +727,6 @@ mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -759,7 +747,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2IOCPage8_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -801,7 +788,6 @@ mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -824,7 +810,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2SasDevicePage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -869,7 +854,6 @@ mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -892,7 +876,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2SasDevicePage1_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -937,7 +920,6 @@ mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -959,7 +941,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys) Mpi2ConfigReply_t mpi_reply; Mpi2SasIOUnitPage0_t config_page; - mutex_lock(&ioc->config_cmds.mutex); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER; @@ -1008,7 +989,6 @@ mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys) _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1032,8 +1012,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t Mpi2ConfigRequest_t mpi_request; int r; struct config_request mem; - - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sz); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1076,7 +1054,6 @@ mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1101,7 +1078,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sz); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1144,7 +1120,6 @@ mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1167,7 +1142,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2ExpanderPage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1212,7 +1186,6 @@ mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1236,7 +1209,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2ExpanderPage1_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1283,7 +1255,6 @@ mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1306,7 +1277,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2SasEnclosurePage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1351,7 +1321,6 @@ mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1373,7 +1342,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2SasPhyPage0_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1419,7 +1387,6 @@ mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1441,7 +1408,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2SasPhyPage1_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1487,7 +1453,6 @@ mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1511,7 +1476,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(config_page, 0, sizeof(Mpi2RaidVolPage1_t)); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1554,7 +1518,6 @@ mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1578,7 +1541,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, struct config_request mem; u16 ioc_status; - mutex_lock(&ioc->config_cmds.mutex); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); *num_pds = 0; mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1626,7 +1588,6 @@ mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1651,7 +1612,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); memset(config_page, 0, sz); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1693,7 +1653,6 @@ mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1717,7 +1676,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t int r; struct config_request mem; - mutex_lock(&ioc->config_cmds.mutex); memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); memset(config_page, 0, sizeof(Mpi2RaidPhysDiskPage0_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1760,7 +1718,6 @@ mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } @@ -1784,7 +1741,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, struct config_request mem; u16 ioc_status; - mutex_lock(&ioc->config_cmds.mutex); *volume_handle = 0; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); mpi_request.Function = MPI2_FUNCTION_CONFIG; @@ -1848,7 +1804,6 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, _config_free_config_dma_memory(ioc, &mem); out: - mutex_unlock(&ioc->config_cmds.mutex); return r; } From 0527a1a8440a20b3d0fd1d0c9e75a6f38a9d5315 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 14 Aug 2009 02:09:56 +0000 Subject: [PATCH 141/338] via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULL Test whether VELOCITY_DUPLEX_FULL bit is set in mii_status. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3ba35956327a..cee08a1e497a 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1778,7 +1778,7 @@ static void velocity_error(struct velocity_info *vptr, int status) * mode */ if (vptr->rev_id < REV_ID_VT3216_A0) { - if (vptr->mii_status | VELOCITY_DUPLEX_FULL) + if (vptr->mii_status & VELOCITY_DUPLEX_FULL) BYTE_REG_BITS_ON(TCR_TB2BDIS, ®s->TCR); else BYTE_REG_BITS_OFF(TCR_TB2BDIS, ®s->TCR); From 22580f894ac190c46beebb5c3172e450a2318f79 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Thu, 13 Aug 2009 19:12:31 +0000 Subject: [PATCH 142/338] drivers/net: fixed drivers that support netpoll use ndo_start_xmit() The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of spin_lock_irq() and spin_unlock_irq() in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use spin_lock_irqsave() and spin_unlock_restore() to prevent the irqs from getting enabled while in netpoll_send_skb(). Call trace: netpoll_send_skb() { -> local_irq_save(flags) ---> dev->ndo_start_xmit(skb, dev) ---> spin_lock_irq() ---> spin_unlock_irq() *******here would enable the interrupt. ... -> local_irq_restore(flags) } Signed-off-by: Dongdong Deng Signed-off-by: Jason Wessel Acked-by: Bruce Ashfield Acked-by: Matt Mackall Signed-off-by: David S. Miller --- drivers/net/b44.c | 5 +++-- drivers/net/tulip/tulip_core.c | 5 +++-- drivers/net/ucc_geth.c | 5 +++-- drivers/net/via-rhine.c | 5 +++-- 4 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 36d4d377ec2f..bafca672ea7d 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -952,9 +952,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) int rc = NETDEV_TX_OK; dma_addr_t mapping; u32 len, entry, ctrl; + unsigned long flags; len = skb->len; - spin_lock_irq(&bp->lock); + spin_lock_irqsave(&bp->lock, flags); /* This is a hard error, log it. */ if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) { @@ -1027,7 +1028,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; out_unlock: - spin_unlock_irq(&bp->lock); + spin_unlock_irqrestore(&bp->lock, flags); return rc; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 99a63649f4fc..4cf9a6588751 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -652,8 +652,9 @@ tulip_start_xmit(struct sk_buff *skb, struct net_device *dev) int entry; u32 flag; dma_addr_t mapping; + unsigned long flags; - spin_lock_irq(&tp->lock); + spin_lock_irqsave(&tp->lock, flags); /* Calculate the next Tx descriptor entry. */ entry = tp->cur_tx % TX_RING_SIZE; @@ -688,7 +689,7 @@ tulip_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Trigger an immediate transmit demand. */ iowrite32(0, tp->base_addr + CSR1); - spin_unlock_irq(&tp->lock); + spin_unlock_irqrestore(&tp->lock, flags); dev->trans_start = jiffies; diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 3b957e6412ee..8a7b8c7bd781 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -3111,10 +3111,11 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) u8 __iomem *bd; /* BD pointer */ u32 bd_status; u8 txQ = 0; + unsigned long flags; ugeth_vdbg("%s: IN", __func__); - spin_lock_irq(&ugeth->lock); + spin_lock_irqsave(&ugeth->lock, flags); dev->stats.tx_bytes += skb->len; @@ -3171,7 +3172,7 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) uccf = ugeth->uccf; out_be16(uccf->p_utodr, UCC_FAST_TOD); #endif - spin_unlock_irq(&ugeth->lock); + spin_unlock_irqrestore(&ugeth->lock, flags); return 0; } diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 88c30a58b4bd..934f7671650a 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1218,6 +1218,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) struct rhine_private *rp = netdev_priv(dev); void __iomem *ioaddr = rp->base; unsigned entry; + unsigned long flags; /* Caution: the write order is important here, set the field with the "ownership" bits last. */ @@ -1261,7 +1262,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); /* lock eth irq */ - spin_lock_irq(&rp->lock); + spin_lock_irqsave(&rp->lock, flags); wmb(); rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn); wmb(); @@ -1280,7 +1281,7 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - spin_unlock_irq(&rp->lock); + spin_unlock_irqrestore(&rp->lock, flags); if (debug > 4) { printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n", From 7c1d15d736687057f4dc6e51fbf44b6f6e4320cb Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Fri, 14 Aug 2009 06:40:48 +0000 Subject: [PATCH 143/338] pegasus: Add new device ID. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add new definition to 'pegasus.h' for support Japanese IO DATA "ETX-US2" USB Ethernet Adapter. PEGASUS_DEV( $B!H(BIO DATA USB ETX-US2$B!I(B, VENDOR_IODATA, 0x092a, DEFAULT_GPIO_RESET | PEGASUS_II ) Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h index c7467823cd1c..f968c834ff63 100644 --- a/drivers/net/usb/pegasus.h +++ b/drivers/net/usb/pegasus.h @@ -250,6 +250,8 @@ PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904, DEFAULT_GPIO_RESET ) PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913, DEFAULT_GPIO_RESET | PEGASUS_II ) +PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a, + DEFAULT_GPIO_RESET | PEGASUS_II ) PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a, DEFAULT_GPIO_RESET) PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002, From 8cdb045632e5ee22854538619ac6f150eb0a4894 Mon Sep 17 00:00:00 2001 From: Tom Goff Date: Fri, 14 Aug 2009 16:33:56 -0700 Subject: [PATCH 144/338] gre: Fix MTU calculation for bound GRE tunnels The GRE header length should be subtracted when the tunnel MTU is calculated. This just corrects for the associativity change introduced by commit 42aa916265d740d66ac1f17290366e9494c884c2 ("gre: Move MTU setting out of ipgre_tunnel_bind_dev"). Signed-off-by: Tom Goff Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index cb4a0f4bd5e5..82c11dd10a62 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -951,7 +951,7 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev) addend += 4; } dev->needed_headroom = addend + hlen; - mtu -= dev->hard_header_len - addend; + mtu -= dev->hard_header_len + addend; if (mtu < 68) mtu = 68; From 616b8434688aa08bd6f019cc60c8dfe121e9e5ae Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 6 Aug 2009 17:47:24 +0200 Subject: [PATCH 145/338] drm/radeon/kms: Add specific rs690 authorized register table rs690 is r3xx 3D engine with AVIVO modesetting so we need to allow AVIVO register for vline synchronization. This add a specific table to rs690 to handle that. Thanks to Marc (marvin24) for debugging this and kudos to Andre (taiu1) for spotting the origin of the bugs. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_asic.h | 3 +- drivers/gpu/drm/radeon/rs690.c | 65 ++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 9a75876e0c3b..c0ae2d923254 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -308,6 +308,7 @@ static struct radeon_asic rs600_asic = { /* * rs690,rs740 */ +int rs690_init(struct radeon_device *rdev); void rs690_errata(struct radeon_device *rdev); void rs690_vram_info(struct radeon_device *rdev); int rs690_mc_init(struct radeon_device *rdev); @@ -316,7 +317,7 @@ uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg); void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); void rs690_bandwidth_update(struct radeon_device *rdev); static struct radeon_asic rs690_asic = { - .init = &r300_init, + .init = &rs690_init, .errata = &rs690_errata, .vram_info = &rs690_vram_info, .gpu_reset = &r300_gpu_reset, diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 839595b00728..bc6b7c5339bc 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -652,3 +652,68 @@ void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) WREG32(RS690_MC_DATA, v); WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); } + +static const unsigned rs690_reg_safe_bm[219] = { + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0x17FF1FFF,0xFFFFFFFC,0xFFFFFFFF,0xFF30FFBF, + 0xFFFFFFF8,0xC3E6FFFF,0xFFFFF6DF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFF03F, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFEFCE,0xF00EBFFF,0x007C0000, + 0xF0000078,0xFF000009,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFF7FF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFC78,0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF, + 0x38FF8F50,0xFFF88082,0xF000000C,0xFAE009FF, + 0x0000FFFF,0xFFFFFFFF,0xFFFFFFFF,0x00000000, + 0x00000000,0x0000C100,0x00000000,0x00000000, + 0x00000000,0x00000000,0x00000000,0x00000000, + 0x00000000,0xFFFF0000,0xFFFFFFFF,0xFF80FFFF, + 0x00000000,0x00000000,0x00000000,0x00000000, + 0x0003FC01,0xFFFFFFF8,0xFE800B19,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, + 0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF, +}; + +int rs690_init(struct radeon_device *rdev) +{ + rdev->config.r300.reg_safe_bm = rs690_reg_safe_bm; + rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs690_reg_safe_bm); + return 0; +} From ebb177d2afb8532a8a316489aed545ed0c170802 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 15 Aug 2009 12:25:08 +1000 Subject: [PATCH 146/338] drm/edid: fixup detailed timings like the X server. this syncs the versioning check with the code the X server uses. Reported-by: Anssi Hannula Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 70 ++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 37 deletions(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 80cc6d06d61b..7f2728bbc16c 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -502,12 +502,40 @@ static int add_detailed_info(struct drm_connector *connector, struct detailed_non_pixel *data = &timing->data.other_data; struct drm_display_mode *newmode; - /* EDID up to and including 1.2 may put monitor info here */ - if (edid->version == 1 && edid->revision < 3) - continue; + /* X server check is version 1.1 or higher */ + if (edid->version == 1 && edid->revision >= 1 && + !timing->pixel_clock) { + /* Other timing or info */ + switch (data->type) { + case EDID_DETAIL_MONITOR_SERIAL: + break; + case EDID_DETAIL_MONITOR_STRING: + break; + case EDID_DETAIL_MONITOR_RANGE: + /* Get monitor range data */ + break; + case EDID_DETAIL_MONITOR_NAME: + break; + case EDID_DETAIL_MONITOR_CPDATA: + break; + case EDID_DETAIL_STD_MODES: + /* Five modes per detailed section */ + for (j = 0; j < 5; i++) { + struct std_timing *std; + struct drm_display_mode *newmode; - /* Detailed mode timing */ - if (timing->pixel_clock) { + std = &data->data.timings[j]; + newmode = drm_mode_std(dev, std); + if (newmode) { + drm_mode_probed_add(connector, newmode); + modes++; + } + } + break; + default: + break; + } + } else { newmode = drm_mode_detailed(dev, edid, timing, quirks); if (!newmode) continue; @@ -518,38 +546,6 @@ static int add_detailed_info(struct drm_connector *connector, drm_mode_probed_add(connector, newmode); modes++; - continue; - } - - /* Other timing or info */ - switch (data->type) { - case EDID_DETAIL_MONITOR_SERIAL: - break; - case EDID_DETAIL_MONITOR_STRING: - break; - case EDID_DETAIL_MONITOR_RANGE: - /* Get monitor range data */ - break; - case EDID_DETAIL_MONITOR_NAME: - break; - case EDID_DETAIL_MONITOR_CPDATA: - break; - case EDID_DETAIL_STD_MODES: - /* Five modes per detailed section */ - for (j = 0; j < 5; i++) { - struct std_timing *std; - struct drm_display_mode *newmode; - - std = &data->data.timings[j]; - newmode = drm_mode_std(dev, std); - if (newmode) { - drm_mode_probed_add(connector, newmode); - modes++; - } - } - break; - default: - break; } } From 21bc1f024d0d4ea43fc0f2a43504e759261c7b18 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:16 +0000 Subject: [PATCH 147/338] sh: skip disabled LCDC channels This patch updates the SuperH Mobile LCDC driver to skip over disabled channels. Without this patch suspend-to-ram operation will crash if deferred io is enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 8f24564f77b0..07f22b625632 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -481,6 +481,9 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { ch = &priv->ch[k]; + if (!ch->enabled) + continue; + board_cfg = &ch->cfg.board_cfg; if (board_cfg->display_on) board_cfg->display_on(board_cfg->board_data); @@ -498,6 +501,8 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) /* clean up deferred io and ask board code to disable panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { ch = &priv->ch[k]; + if (!ch->enabled) + continue; /* deferred io mode: * flush frame, and wait for frame end interrupt From f6431732f128a241b149c0aa85dfec852455ebf9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:25 +0000 Subject: [PATCH 148/338] sh: CMT suspend/resume This patch updates the SuperH CMT driver with suspend and resume callbacks for the suspend-to-ram case. This patch stops the CMT channel at suspend time to avoid unwanted wake up events. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 2964f5f4a7ef..6b3e0c2f33e2 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -40,6 +40,7 @@ struct sh_cmt_priv { struct platform_device *pdev; unsigned long flags; + unsigned long flags_suspend; unsigned long match_value; unsigned long next_match_value; unsigned long max_match_value; @@ -667,11 +668,38 @@ static int __devexit sh_cmt_remove(struct platform_device *pdev) return -EBUSY; /* cannot unregister clockevent and clocksource */ } +static int sh_cmt_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_cmt_priv *p = platform_get_drvdata(pdev); + + /* save flag state and stop CMT channel */ + p->flags_suspend = p->flags; + sh_cmt_stop(p, p->flags); + return 0; +} + +static int sh_cmt_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct sh_cmt_priv *p = platform_get_drvdata(pdev); + + /* start CMT channel from saved state */ + sh_cmt_start(p, p->flags_suspend); + return 0; +} + +static struct dev_pm_ops sh_cmt_dev_pm_ops = { + .suspend = sh_cmt_suspend, + .resume = sh_cmt_resume, +}; + static struct platform_driver sh_cmt_device_driver = { .probe = sh_cmt_probe, .remove = __devexit_p(sh_cmt_remove), .driver = { .name = "sh_cmt", + .pm = &sh_cmt_dev_pm_ops, } }; From 9747e78b304b44d6fb73e2c8071406d55aa8bb75 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:34 +0000 Subject: [PATCH 149/338] sh: use in-soc KEYSC on se7724 This patch updates the Solution Engine 7724 board code to use in-SoC KEYSC resources for the keyboard platform device. Using the in-SoC key scan controller fixes a crash-during-resume issue. Without this patch the KEYSC hardware block located in the board specific FPGA is used together with an external IRQ which is routed through the FPGA and handled by some board specific demux code. This board specific FPGA interrupt code does not implement desc->set_wake() so the enable_irq_wake() call in the sh_keysc driver will fail at suspend-to-ram time and the disable_irq_wake() will bomb out when resuming. Changing the platform data to use the in-SoC KEYSC hardware makes the se7724 board support code less special which is a good thing. Also, the board specific KEYSC pin setup code selects in-SoC pin functions already which makes the current FPGA platform device data look like a typo. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7724/setup.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 8fed45a2fb85..15456a0773bf 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -238,7 +238,7 @@ static struct platform_device ceu1_device = { }, }; -/* KEYSC */ +/* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, .scan_timing = 10, @@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = { static struct resource keysc_resources[] = { [0] = { - .start = 0x1a204000, - .end = 0x1a20400f, + .name = "KEYSC", + .start = 0x044b0000, + .end = 0x044b000f, .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ0_KEY, + .start = 79, .flags = IORESOURCE_IRQ, }, }; From 237674e050ae8ea40a432412df6c15d60b7ae8a6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 15 Aug 2009 02:53:42 +0000 Subject: [PATCH 150/338] sh: sh7724 ddr self-refresh changes This patch updates the SuperH Mobile sleep assembly code with support for DBSC memory controller found in the sh7724 processor. Without this fix the memory hooked up to the sh7724 processor will never enter self-refresh mode before suspending to ram. The effect of this is that the memory contents most likeley will be lost upon resume which may or may not be what you want. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/shmobile/sleep.S | 70 ++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index 5d888ef53d82..baf2d7d46b05 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby) tst #SUSP_SH_SF, r0 bt skip_set_sf +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in self-refresh mode */ - /* SDRAM: disable power down and put in self-refresh mode */ + mov.l dben_reg, r4 + mov.l dben_data0, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data1, r1 + mov.l r1, @r4 +#else + /* SBSC: disable power down and put in self-refresh mode */ mov.l 1f, r4 mov.l 2f, r1 mov.l @r4, r2 @@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby) mov.l 3f, r3 and r3, r2 mov.l r2, @r4 +#endif skip_set_sf: tst #SUSP_SH_SLEEP, r0 @@ -84,7 +107,36 @@ done_sleep: tst #SUSP_SH_SF, r0 bt skip_restore_sf - /* SDRAM: set auto-refresh mode */ +#ifdef CONFIG_CPU_SUBTYPE_SH7724 + /* DBSC: put memory in auto-refresh mode */ + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data0, r1 + mov.l r1, @r4 + + /* sleep 140 ns */ + nop + nop + nop + nop + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data0, r1 + mov.l r1, @r4 + + mov.l dbcmdcnt_reg, r4 + mov.l dbcmdcnt_data1, r1 + mov.l r1, @r4 + + mov.l dben_reg, r4 + mov.l dben_data1, r1 + mov.l r1, @r4 + + mov.l dbrfpdn0_reg, r4 + mov.l dbrfpdn0_data2, r1 + mov.l r1, @r4 +#else + /* SBSC: set auto-refresh mode */ mov.l 1f, r4 mov.l @r4, r2 mov.l 4f, r3 @@ -98,15 +150,29 @@ done_sleep: add r4, r3 or r2, r3 mov.l r3, @r1 +#endif skip_restore_sf: rts nop .balign 4 +#ifdef CONFIG_CPU_SUBTYPE_SH7724 +dben_reg: .long 0xfd000010 /* DBEN */ +dben_data0: .long 0 +dben_data1: .long 1 +dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ +dbrfpdn0_data0: .long 0 +dbrfpdn0_data1: .long 1 +dbrfpdn0_data2: .long 0x00010000 +dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ +dbcmdcnt_data0: .long 2 +dbcmdcnt_data1: .long 4 +#else 1: .long 0xfe400008 /* SDCR0 */ 2: .long 0x00000400 3: .long 0xffff7fff 4: .long 0xfffffbff +#endif 5: .long 0xa4150020 /* STBCR */ 6: .long 0xfe40001c /* RTCOR */ 7: .long 0xfe400018 /* RTCNT */ From 3ef12c3c97603bad405d30c989718cc9405e2759 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 14 Aug 2009 13:56:37 -0500 Subject: [PATCH 151/338] x86: Fix UV BAU destination subnode id The SGI UV Broadcast Assist Unit is used to send TLB shootdown messages to remote nodes of the system. The header of the message must contain the subnode id of the block in the receiving hub that handles such messages. It should always be 0x10, the id of the "LB" block. It had previously been documented as a "must be zero" field. Signed-off-by: Cliff Wickman Acked-by: Jack Steiner LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_bau.h | 2 +- arch/x86/kernel/tlb_uv.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index bddd44f2f0ab..80e2984f521c 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -133,7 +133,7 @@ struct bau_msg_payload { * see table 4.2.3.0.1 in broacast_assist spec. */ struct bau_msg_header { - unsigned int dest_subnodeid:6; /* must be zero */ + unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */ /* bits 20:6 */ /* first bit in node_map */ diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 8ccabb8a2f6a..77b9689f8edb 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -744,6 +744,7 @@ uv_activation_descriptor_init(int node, int pnode) * note that base_dest_nodeid is actually a nasid. */ ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1; + ad2->header.dest_subnodeid = 0x10; /* the LB */ ad2->header.command = UV_NET_ENDPOINT_INTD; ad2->header.int_both = 1; /* From dde5828f56cb2c1aa70365c476e6830482127258 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 15 Aug 2009 12:36:00 +0100 Subject: [PATCH 152/338] ARM: Fix broken highmem support Currently, highmem is selectable, and you can request an increased vmalloc area. However, none of this has any effect on the memory layout since a patch in the highmem series was accidentally dropped. Moreover, even if you did want highmem, all memory would still be registered as lowmem, possibly resulting in overflow of the available virtual mapping space. The highmem boundary is determined by the highest allowed beginning of the vmalloc area, which depends on its configurable minimum size (see commit 60296c71f6c5063e3c1f1d2619ca0b60940162e7 for details on this). We should create mappings and initialize bootmem only for low memory, while the zone allocator must still be told about highmem. Currently, memory nodes which are completely located in high memory are not supported. This is not a huge limitation since systems relying on highmem support are unlikely to have discontiguous memory with large holes. [ A similar patch was meant to be merged before commit 5f0fbf9ecaf3 and be available in Linux v2.6.30, however some git rebase screw-up of mine dropped the first commit of the series, and that goofage escaped testing somehow as well. -- Nico ] Signed-off-by: Russell King Reviewed-by: Nicolas Pitre --- arch/arm/include/asm/setup.h | 3 +- arch/arm/mm/init.c | 118 ++++++++++++++++++++++------------- arch/arm/mm/mmu.c | 9 ++- 3 files changed, 83 insertions(+), 47 deletions(-) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee1304f22f94..5ccce0a9b03c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - int node; + unsigned short node; + unsigned short highmem; }; struct meminfo { diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 8277802ec859..3a7279c1ce5e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -120,6 +120,32 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } +static void __init find_node_limits(int node, struct meminfo *mi, + unsigned long *min, unsigned long *max_low, unsigned long *max_high) +{ + int i; + + *min = -1UL; + *max_low = *max_high = 0; + + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + unsigned long start, end; + + start = bank_pfn_start(bank); + end = bank_pfn_end(bank); + + if (*min > start) + *min = start; + if (*max_high < end) + *max_high = end; + if (bank->highmem) + continue; + if (*max_low < end) + *max_low = end; + } +} + /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards @@ -210,40 +236,24 @@ static inline void map_memory_bank(struct membank *bank) #endif } -static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) +static void __init bootmem_init_node(int node, struct meminfo *mi, + unsigned long start_pfn, unsigned long end_pfn) { - unsigned long start_pfn, end_pfn, boot_pfn; + unsigned long boot_pfn; unsigned int boot_pages; pg_data_t *pgdat; int i; - start_pfn = -1UL; - end_pfn = 0; - /* - * Calculate the pfn range, and map the memory banks for this node. + * Map the memory banks for this node. */ for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - unsigned long start, end; - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (start_pfn > start) - start_pfn = start; - if (end_pfn < end) - end_pfn = end; - - map_memory_bank(bank); + if (!bank->highmem) + map_memory_bank(bank); } - /* - * If there is no memory in this node, ignore it. - */ - if (end_pfn == 0) - return end_pfn; - /* * Allocate the bootmem bitmap page. */ @@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) for_each_nodebank(i, mi, node) { struct membank *bank = &mi->bank[i]; - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + if (!bank->highmem) + free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } @@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi) */ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); - - return end_pfn; } static void __init bootmem_reserve_initrd(int node) @@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node) static void __init bootmem_free_node(int node, struct meminfo *mi) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long start_pfn, end_pfn; - pg_data_t *pgdat = NODE_DATA(node); + unsigned long min, max_low, max_high; int i; - start_pfn = pgdat->bdata->node_min_pfn; - end_pfn = pgdat->bdata->node_low_pfn; + find_node_limits(node, mi, &min, &max_low, &max_high); /* * initialise the zones within this node. */ memset(zone_size, 0, sizeof(zone_size)); - memset(zhole_size, 0, sizeof(zhole_size)); /* * The size of this node has already been determined. If we need * to do anything fancy with the allocation of this memory to the * zones, now is the time to do it. */ - zone_size[0] = end_pfn - start_pfn; + zone_size[0] = max_low - min; +#ifdef CONFIG_HIGHMEM + zone_size[ZONE_HIGHMEM] = max_high - max_low; +#endif /* * For each bank in this node, calculate the size of the holes. * holes = node_size - sum(bank_sizes_in_node) */ - zhole_size[0] = zone_size[0]; - for_each_nodebank(i, mi, node) - zhole_size[0] -= bank_pfn_size(&mi->bank[i]); + memcpy(zhole_size, zone_size, sizeof(zhole_size)); + for_each_nodebank(i, mi, node) { + int idx = 0; +#ifdef CONFIG_HIGHMEM + if (mi->bank[i].highmem) + idx = ZONE_HIGHMEM; +#endif + zhole_size[idx] -= bank_pfn_size(&mi->bank[i]); + } /* * Adjust the sizes according to any special requirements for @@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) */ arch_adjust_zones(node, zone_size, zhole_size); - free_area_init_node(node, zone_size, start_pfn, zhole_size); + free_area_init_node(node, zone_size, min, zhole_size); } void __init bootmem_init(void) { struct meminfo *mi = &meminfo; - unsigned long memend_pfn = 0; + unsigned long min, max_low, max_high; int node, initrd_node; /* @@ -345,11 +360,29 @@ void __init bootmem_init(void) */ initrd_node = check_initrd(mi); + max_low = max_high = 0; + /* * Run through each node initialising the bootmem allocator. */ for_each_node(node) { - unsigned long end_pfn = bootmem_init_node(node, mi); + unsigned long node_low, node_high; + + find_node_limits(node, mi, &min, &node_low, &node_high); + + if (node_low > max_low) + max_low = node_low; + if (node_high > max_high) + max_high = node_high; + + /* + * If there is no memory in this node, ignore it. + * (We can't have nodes which have no lowmem) + */ + if (node_low == 0) + continue; + + bootmem_init_node(node, mi, min, node_low); /* * Reserve any special node zero regions. @@ -362,12 +395,6 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); - - /* - * Remember the highest memory PFN. - */ - if (end_pfn > memend_pfn) - memend_pfn = end_pfn; } /* @@ -383,7 +410,7 @@ void __init bootmem_init(void) for_each_node(node) bootmem_free_node(node, mi); - high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1; + high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; /* * This doesn't seem to be used by the Linux memory manager any @@ -393,7 +420,8 @@ void __init bootmem_init(void) * Note: max_low_pfn and max_pfn reflect the number of _pages_ in * the system, not the maximum PFN. */ - max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; + max_low_pfn = max_low - PHYS_PFN_OFFSET; + max_pfn = max_high - PHYS_PFN_OFFSET; } static inline int free_area(unsigned long pfn, unsigned long end, char *s) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4722582b17b8..4426ee67ceca 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc); static void __init sanity_check_meminfo(void) { - int i, j; + int i, j, highmem = 0; for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM + if (__va(bank->start) > VMALLOC_MIN || + __va(bank->start) < (void *)PAGE_OFFSET) + highmem = 1; + + bank->highmem = highmem; + /* * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. @@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void) i++; bank[1].size -= VMALLOC_MIN - __va(bank->start); bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].highmem = highmem = 1; j++; } bank->size = VMALLOC_MIN - __va(bank->start); From c5e7f5a38a7ebf3697281bc7cb494e676f287ac0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 3 Jun 2009 13:05:48 +0200 Subject: [PATCH 153/338] [WATCHDOG] ar7_wdt: fix path to ar7-specific headers AR7 is currently being resubmitted for mainline inclusion and we changed the path to the ar7-specific headers from ar7 to mach-ar7 to reflect the other MIPS-based boards header hierarchy. This patch will avoid any future compilation failure due to missing headers. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ar7_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 3fe9742c23ca..2f8643efe92c 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -37,7 +37,7 @@ #include #include -#include +#include #define DRVNAME "ar7_wdt" #define LONGNAME "TI AR7 Watchdog Timer" From a2bb9f4d6a5a589b481595207ac3588cc08d1b60 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Aug 2009 21:57:22 +0100 Subject: [PATCH 154/338] ARM: 5673/1: U300 fix initsection compile warning The u300_init_check_chip() function was not properly tagged with the __init macro and provided a initsection mismatch on compilation. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 7936085dd758..2e9b8ccd8ec2 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = { } }; -static void u300_init_check_chip(void) +static void __init u300_init_check_chip(void) { u16 val; From 3f8befec95d5c1bbc6e247e1a5dafa82519530f9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sat, 15 Aug 2009 20:54:13 +1000 Subject: [PATCH 155/338] drm/radeon/kms: add rv530 R300_SU_REG_DEST + reloc for ZPASS_ADDR These are needed for Occulsion Query support. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 9c8d41534a5d..8594486e1625 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1403,6 +1403,21 @@ static int r300_packet0_check(struct radeon_cs_parser *p, tmp = (ib_chunk->kdata[idx] >> 22) & 0xF; track->textures[i].txdepth = tmp; break; + case R300_ZB_ZPASS_ADDR: + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + break; + case 0x4be8: + /* valid register only on RV530 */ + if (p->rdev->family == CHIP_RV530) + break; + /* fallthrough do not move */ default: printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n", reg, idx); From 7ed220d738cf16adff6bc3b31ad25b8848a2fa9c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 13 Aug 2009 11:10:51 +0200 Subject: [PATCH 156/338] drm/radeon/kms: Fix up vertical blank interrupt support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes 3D apps timing out in the WAIT_VBLANK ioctl. AVIVO bits compile-tested only. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 66 +++++++++++++++++ drivers/gpu/drm/radeon/r500_reg.h | 16 +++- drivers/gpu/drm/radeon/radeon.h | 2 + drivers/gpu/drm/radeon/radeon_asic.h | 23 ++++-- drivers/gpu/drm/radeon/radeon_irq_kms.c | 54 -------------- drivers/gpu/drm/radeon/radeon_kms.c | 33 +++++++-- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 7 +- drivers/gpu/drm/radeon/radeon_reg.h | 11 ++- drivers/gpu/drm/radeon/rs600.c | 82 +++++++++++++++++++++ 9 files changed, 217 insertions(+), 77 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index f1ba8ff41130..e1a6e82b9960 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -253,6 +253,72 @@ void r100_mc_fini(struct radeon_device *rdev) } +/* + * Interrupts + */ +int r100_irq_set(struct radeon_device *rdev) +{ + uint32_t tmp = 0; + + if (rdev->irq.sw_int) { + tmp |= RADEON_SW_INT_ENABLE; + } + if (rdev->irq.crtc_vblank_int[0]) { + tmp |= RADEON_CRTC_VBLANK_MASK; + } + if (rdev->irq.crtc_vblank_int[1]) { + tmp |= RADEON_CRTC2_VBLANK_MASK; + } + WREG32(RADEON_GEN_INT_CNTL, tmp); + return 0; +} + +static inline uint32_t r100_irq_ack(struct radeon_device *rdev) +{ + uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS); + uint32_t irq_mask = RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT | + RADEON_CRTC2_VBLANK_STAT; + + if (irqs) { + WREG32(RADEON_GEN_INT_STATUS, irqs); + } + return irqs & irq_mask; +} + +int r100_irq_process(struct radeon_device *rdev) +{ + uint32_t status; + + status = r100_irq_ack(rdev); + if (!status) { + return IRQ_NONE; + } + while (status) { + /* SW interrupt */ + if (status & RADEON_SW_INT_TEST) { + radeon_fence_process(rdev); + } + /* Vertical blank interrupts */ + if (status & RADEON_CRTC_VBLANK_STAT) { + drm_handle_vblank(rdev->ddev, 0); + } + if (status & RADEON_CRTC2_VBLANK_STAT) { + drm_handle_vblank(rdev->ddev, 1); + } + status = r100_irq_ack(rdev); + } + return IRQ_HANDLED; +} + +u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc) +{ + if (crtc == 0) + return RREG32(RADEON_CRTC_CRNT_FRAME); + else + return RREG32(RADEON_CRTC2_CRNT_FRAME); +} + + /* * Fence emission */ diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 036691b38cb7..e1d5e0331e19 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -350,6 +350,7 @@ #define AVIVO_D1CRTC_BLANK_CONTROL 0x6084 #define AVIVO_D1CRTC_INTERLACE_CONTROL 0x6088 #define AVIVO_D1CRTC_INTERLACE_STATUS 0x608c +#define AVIVO_D1CRTC_FRAME_COUNT 0x60a4 #define AVIVO_D1CRTC_STEREO_CONTROL 0x60c4 /* master controls */ @@ -438,14 +439,15 @@ # define AVIVO_DC_LB_DISP1_END_ADR_SHIFT 4 # define AVIVO_DC_LB_DISP1_END_ADR_MASK 0x7ff -#define R500_DxMODE_INT_MASK 0x6540 -#define R500_D1MODE_INT_MASK (1<<0) -#define R500_D2MODE_INT_MASK (1<<8) - #define AVIVO_D1MODE_DATA_FORMAT 0x6528 # define AVIVO_D1MODE_INTERLEAVE_EN (1 << 0) #define AVIVO_D1MODE_DESKTOP_HEIGHT 0x652C +#define AVIVO_D1MODE_VBLANK_STATUS 0x6534 +# define AVIVO_VBLANK_ACK (1 << 4) #define AVIVO_D1MODE_VLINE_START_END 0x6538 +#define AVIVO_DxMODE_INT_MASK 0x6540 +# define AVIVO_D1MODE_INT_MASK (1 << 0) +# define AVIVO_D2MODE_INT_MASK (1 << 8) #define AVIVO_D1MODE_VIEWPORT_START 0x6580 #define AVIVO_D1MODE_VIEWPORT_SIZE 0x6584 #define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6588 @@ -475,6 +477,7 @@ #define AVIVO_D2CRTC_BLANK_CONTROL 0x6884 #define AVIVO_D2CRTC_INTERLACE_CONTROL 0x6888 #define AVIVO_D2CRTC_INTERLACE_STATUS 0x688c +#define AVIVO_D2CRTC_FRAME_COUNT 0x68a4 #define AVIVO_D2CRTC_STEREO_CONTROL 0x68c4 #define AVIVO_D2GRPH_ENABLE 0x6900 @@ -497,6 +500,7 @@ #define AVIVO_D2CUR_SIZE 0x6c10 #define AVIVO_D2CUR_POSITION 0x6c14 +#define AVIVO_D2MODE_VBLANK_STATUS 0x6d34 #define AVIVO_D2MODE_VLINE_START_END 0x6d38 #define AVIVO_D2MODE_VIEWPORT_START 0x6d80 #define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84 @@ -748,4 +752,8 @@ # define AVIVO_I2C_EN (1 << 0) # define AVIVO_I2C_RESET (1 << 8) +#define AVIVO_DISP_INTERRUPT_STATUS 0x7edc +# define AVIVO_D1_VBLANK_INTERRUPT (1 << 4) +# define AVIVO_D2_VBLANK_INTERRUPT (1 << 5) + #endif diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b1d945b8ed6c..346112740846 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -574,6 +574,7 @@ struct radeon_asic { void (*ring_start)(struct radeon_device *rdev); int (*irq_set)(struct radeon_device *rdev); int (*irq_process)(struct radeon_device *rdev); + u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc); void (*fence_ring_emit)(struct radeon_device *rdev, struct radeon_fence *fence); int (*cs_parse)(struct radeon_cs_parser *p); int (*copy_blit)(struct radeon_device *rdev, @@ -862,6 +863,7 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev)) #define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev)) #define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev)) +#define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc)) #define radeon_fence_ring_emit(rdev, fence) (rdev)->asic->fence_ring_emit((rdev), (fence)) #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f)) #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index c0ae2d923254..7ca6c13569b5 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -49,6 +49,7 @@ void r100_vram_info(struct radeon_device *rdev); int r100_gpu_reset(struct radeon_device *rdev); int r100_mc_init(struct radeon_device *rdev); void r100_mc_fini(struct radeon_device *rdev); +u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc); int r100_wb_init(struct radeon_device *rdev); void r100_wb_fini(struct radeon_device *rdev); int r100_gart_enable(struct radeon_device *rdev); @@ -96,6 +97,7 @@ static struct radeon_asic r100_asic = { .ring_start = &r100_ring_start, .irq_set = &r100_irq_set, .irq_process = &r100_irq_process, + .get_vblank_counter = &r100_get_vblank_counter, .fence_ring_emit = &r100_fence_ring_emit, .cs_parse = &r100_cs_parse, .copy_blit = &r100_copy_blit, @@ -156,6 +158,7 @@ static struct radeon_asic r300_asic = { .ring_start = &r300_ring_start, .irq_set = &r100_irq_set, .irq_process = &r100_irq_process, + .get_vblank_counter = &r100_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -196,6 +199,7 @@ static struct radeon_asic r420_asic = { .ring_start = &r300_ring_start, .irq_set = &r100_irq_set, .irq_process = &r100_irq_process, + .get_vblank_counter = &r100_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -243,6 +247,7 @@ static struct radeon_asic rs400_asic = { .ring_start = &r300_ring_start, .irq_set = &r100_irq_set, .irq_process = &r100_irq_process, + .get_vblank_counter = &r100_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -266,6 +271,8 @@ void rs600_vram_info(struct radeon_device *rdev); int rs600_mc_init(struct radeon_device *rdev); void rs600_mc_fini(struct radeon_device *rdev); int rs600_irq_set(struct radeon_device *rdev); +int rs600_irq_process(struct radeon_device *rdev); +u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc); int rs600_gart_enable(struct radeon_device *rdev); void rs600_gart_disable(struct radeon_device *rdev); void rs600_gart_tlb_flush(struct radeon_device *rdev); @@ -291,7 +298,8 @@ static struct radeon_asic rs600_asic = { .cp_disable = &r100_cp_disable, .ring_start = &r300_ring_start, .irq_set = &rs600_irq_set, - .irq_process = &r100_irq_process, + .irq_process = &rs600_irq_process, + .get_vblank_counter = &rs600_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -334,7 +342,8 @@ static struct radeon_asic rs690_asic = { .cp_disable = &r100_cp_disable, .ring_start = &r300_ring_start, .irq_set = &rs600_irq_set, - .irq_process = &r100_irq_process, + .irq_process = &rs600_irq_process, + .get_vblank_counter = &rs600_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -382,8 +391,9 @@ static struct radeon_asic rv515_asic = { .cp_fini = &r100_cp_fini, .cp_disable = &r100_cp_disable, .ring_start = &rv515_ring_start, - .irq_set = &r100_irq_set, - .irq_process = &r100_irq_process, + .irq_set = &rs600_irq_set, + .irq_process = &rs600_irq_process, + .get_vblank_counter = &rs600_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, @@ -424,8 +434,9 @@ static struct radeon_asic r520_asic = { .cp_fini = &r100_cp_fini, .cp_disable = &r100_cp_disable, .ring_start = &rv515_ring_start, - .irq_set = &r100_irq_set, - .irq_process = &r100_irq_process, + .irq_set = &rs600_irq_set, + .irq_process = &rs600_irq_process, + .get_vblank_counter = &rs600_get_vblank_counter, .fence_ring_emit = &r300_fence_ring_emit, .cs_parse = &r300_cs_parse, .copy_blit = &r100_copy_blit, diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 491d569deb0e..9805e4b6ca1b 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -32,60 +32,6 @@ #include "radeon.h" #include "atom.h" -static inline uint32_t r100_irq_ack(struct radeon_device *rdev) -{ - uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS); - uint32_t irq_mask = RADEON_SW_INT_TEST; - - if (irqs) { - WREG32(RADEON_GEN_INT_STATUS, irqs); - } - return irqs & irq_mask; -} - -int r100_irq_set(struct radeon_device *rdev) -{ - uint32_t tmp = 0; - - if (rdev->irq.sw_int) { - tmp |= RADEON_SW_INT_ENABLE; - } - /* Todo go through CRTC and enable vblank int or not */ - WREG32(RADEON_GEN_INT_CNTL, tmp); - return 0; -} - -int r100_irq_process(struct radeon_device *rdev) -{ - uint32_t status; - - status = r100_irq_ack(rdev); - if (!status) { - return IRQ_NONE; - } - while (status) { - /* SW interrupt */ - if (status & RADEON_SW_INT_TEST) { - radeon_fence_process(rdev); - } - status = r100_irq_ack(rdev); - } - return IRQ_HANDLED; -} - -int rs600_irq_set(struct radeon_device *rdev) -{ - uint32_t tmp = 0; - - if (rdev->irq.sw_int) { - tmp |= RADEON_SW_INT_ENABLE; - } - WREG32(RADEON_GEN_INT_CNTL, tmp); - /* Todo go through CRTC and enable vblank int or not */ - WREG32(R500_DxMODE_INT_MASK, 0); - return 0; -} - irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 3357110e30ce..d2764bf6b2a2 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -141,19 +141,42 @@ void radeon_driver_preclose_kms(struct drm_device *dev, */ u32 radeon_get_vblank_counter_kms(struct drm_device *dev, int crtc) { - /* FIXME: implement */ - return 0; + struct radeon_device *rdev = dev->dev_private; + + if (crtc < 0 || crtc > 1) { + DRM_ERROR("Invalid crtc %d\n", crtc); + return -EINVAL; + } + + return radeon_get_vblank_counter(rdev, crtc); } int radeon_enable_vblank_kms(struct drm_device *dev, int crtc) { - /* FIXME: implement */ - return 0; + struct radeon_device *rdev = dev->dev_private; + + if (crtc < 0 || crtc > 1) { + DRM_ERROR("Invalid crtc %d\n", crtc); + return -EINVAL; + } + + rdev->irq.crtc_vblank_int[crtc] = true; + + return radeon_irq_set(rdev); } void radeon_disable_vblank_kms(struct drm_device *dev, int crtc) { - /* FIXME: implement */ + struct radeon_device *rdev = dev->dev_private; + + if (crtc < 0 || crtc > 1) { + DRM_ERROR("Invalid crtc %d\n", crtc); + return; + } + + rdev->irq.crtc_vblank_int[crtc] = false; + + radeon_irq_set(rdev); } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 7d06dc98a42a..0da72f18fd3a 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -310,10 +310,13 @@ void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) RADEON_CRTC_DISP_REQ_EN_B)); WREG32_P(RADEON_CRTC_EXT_CNTL, 0, ~mask); } + drm_vblank_post_modeset(dev, radeon_crtc->crtc_id); + radeon_crtc_load_lut(crtc); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: + drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id); if (radeon_crtc->crtc_id) WREG32_P(RADEON_CRTC2_GEN_CNTL, mask, ~mask); else { @@ -323,10 +326,6 @@ void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) } break; } - - if (mode != DRM_MODE_DPMS_OFF) { - radeon_crtc_load_lut(crtc); - } } /* properly set crtc bpp when using atombios */ diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index e1b618574461..5a098f304edb 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -982,12 +982,15 @@ # define RS400_TMDS2_PLLRST (1 << 1) #define RADEON_GEN_INT_CNTL 0x0040 +# define RADEON_CRTC_VBLANK_MASK (1 << 0) +# define RADEON_CRTC2_VBLANK_MASK (1 << 9) # define RADEON_SW_INT_ENABLE (1 << 25) #define RADEON_GEN_INT_STATUS 0x0044 -# define RADEON_VSYNC_INT_AK (1 << 2) -# define RADEON_VSYNC_INT (1 << 2) -# define RADEON_VSYNC2_INT_AK (1 << 6) -# define RADEON_VSYNC2_INT (1 << 6) +# define AVIVO_DISPLAY_INT_STATUS (1 << 0) +# define RADEON_CRTC_VBLANK_STAT (1 << 0) +# define RADEON_CRTC_VBLANK_STAT_ACK (1 << 0) +# define RADEON_CRTC2_VBLANK_STAT (1 << 9) +# define RADEON_CRTC2_VBLANK_STAT_ACK (1 << 9) # define RADEON_SW_INT_FIRE (1 << 26) # define RADEON_SW_INT_TEST (1 << 25) # define RADEON_SW_INT_TEST_ACK (1 << 25) diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index bbea6dee4a94..7e8ce983a908 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -239,6 +239,88 @@ void rs600_mc_fini(struct radeon_device *rdev) } +/* + * Interrupts + */ +int rs600_irq_set(struct radeon_device *rdev) +{ + uint32_t tmp = 0; + uint32_t mode_int = 0; + + if (rdev->irq.sw_int) { + tmp |= RADEON_SW_INT_ENABLE; + } + if (rdev->irq.crtc_vblank_int[0]) { + tmp |= AVIVO_DISPLAY_INT_STATUS; + mode_int |= AVIVO_D1MODE_INT_MASK; + } + if (rdev->irq.crtc_vblank_int[1]) { + tmp |= AVIVO_DISPLAY_INT_STATUS; + mode_int |= AVIVO_D2MODE_INT_MASK; + } + WREG32(RADEON_GEN_INT_CNTL, tmp); + WREG32(AVIVO_DxMODE_INT_MASK, mode_int); + return 0; +} + +static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int) +{ + uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS); + uint32_t irq_mask = RADEON_SW_INT_TEST; + + if (irqs & AVIVO_DISPLAY_INT_STATUS) { + *r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS); + if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) { + WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK); + } + if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) { + WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK); + } + } else { + *r500_disp_int = 0; + } + + if (irqs) { + WREG32(RADEON_GEN_INT_STATUS, irqs); + } + return irqs & irq_mask; +} + +int rs600_irq_process(struct radeon_device *rdev) +{ + uint32_t status; + uint32_t r500_disp_int; + + status = rs600_irq_ack(rdev, &r500_disp_int); + if (!status && !r500_disp_int) { + return IRQ_NONE; + } + while (status || r500_disp_int) { + /* SW interrupt */ + if (status & RADEON_SW_INT_TEST) { + radeon_fence_process(rdev); + } + /* Vertical blank interrupts */ + if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) { + drm_handle_vblank(rdev->ddev, 0); + } + if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) { + drm_handle_vblank(rdev->ddev, 1); + } + status = rs600_irq_ack(rdev, &r500_disp_int); + } + return IRQ_HANDLED; +} + +u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc) +{ + if (crtc == 0) + return RREG32(AVIVO_D1CRTC_FRAME_COUNT); + else + return RREG32(AVIVO_D2CRTC_FRAME_COUNT); +} + + /* * Global GPU functions */ From de1b28989edff519d0548ebaa3f94fd3d1524cf2 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 12 Aug 2009 18:43:14 +1000 Subject: [PATCH 157/338] drm/radeon/kms: cut down indirects in register accesses. We really don't want to be doing all these indirects, updating the GPU gart table is something we do often so the less overhead the better. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 20 ---------- drivers/gpu/drm/radeon/r300.c | 23 +----------- drivers/gpu/drm/radeon/radeon.h | 51 ++++++++++++++++++++++---- drivers/gpu/drm/radeon/radeon_device.c | 13 ++----- drivers/gpu/drm/radeon/rv515.c | 19 ---------- 5 files changed, 47 insertions(+), 79 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index e1a6e82b9960..90ff8e0ac04e 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1622,26 +1622,6 @@ void r100_pll_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) r100_pll_errata_after_data(rdev); } -uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg) -{ - if (reg < 0x10000) - return readl(((void __iomem *)rdev->rmmio) + reg); - else { - writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); - return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA); - } -} - -void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) -{ - if (reg < 0x10000) - writel(v, ((void __iomem *)rdev->rmmio) + reg); - else { - writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); - writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA); - } -} - int r100_init(struct radeon_device *rdev) { return 0; diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index 8594486e1625..c47579dcafa1 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -83,8 +83,8 @@ void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev) WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp | RADEON_PCIE_TX_GART_INVALIDATE_TLB); (void)RREG32_PCIE(RADEON_PCIE_TX_GART_CNTL); WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp); - mb(); } + mb(); } int rv370_pcie_gart_enable(struct radeon_device *rdev) @@ -592,27 +592,6 @@ void r300_vram_info(struct radeon_device *rdev) } -/* - * Indirect registers accessor - */ -uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg) -{ - uint32_t r; - - WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff)); - (void)RREG32(RADEON_PCIE_INDEX); - r = RREG32(RADEON_PCIE_DATA); - return r; -} - -void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) -{ - WREG8(RADEON_PCIE_INDEX, ((reg) & 0xff)); - (void)RREG32(RADEON_PCIE_INDEX); - WREG32(RADEON_PCIE_DATA, (v)); - (void)RREG32(RADEON_PCIE_DATA); -} - /* * PCIE Lanes */ diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 346112740846..87170a56e37b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -667,14 +667,11 @@ struct radeon_device { resource_size_t rmmio_base; resource_size_t rmmio_size; void *rmmio; - radeon_rreg_t mm_rreg; - radeon_wreg_t mm_wreg; radeon_rreg_t mc_rreg; radeon_wreg_t mc_wreg; radeon_rreg_t pll_rreg; radeon_wreg_t pll_wreg; - radeon_rreg_t pcie_rreg; - radeon_wreg_t pcie_wreg; + uint32_t pcie_reg_mask; radeon_rreg_t pciep_rreg; radeon_wreg_t pciep_wreg; struct radeon_clock clock; @@ -706,22 +703,42 @@ int radeon_device_init(struct radeon_device *rdev, void radeon_device_fini(struct radeon_device *rdev); int radeon_gpu_wait_for_idle(struct radeon_device *rdev); +static inline uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg) +{ + if (reg < 0x10000) + return readl(((void __iomem *)rdev->rmmio) + reg); + else { + writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); + return readl(((void __iomem *)rdev->rmmio) + RADEON_MM_DATA); + } +} + +static inline void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) +{ + if (reg < 0x10000) + writel(v, ((void __iomem *)rdev->rmmio) + reg); + else { + writel(reg, ((void __iomem *)rdev->rmmio) + RADEON_MM_INDEX); + writel(v, ((void __iomem *)rdev->rmmio) + RADEON_MM_DATA); + } +} + /* * Registers read & write functions. */ #define RREG8(reg) readb(((void __iomem *)rdev->rmmio) + (reg)) #define WREG8(reg, v) writeb(v, ((void __iomem *)rdev->rmmio) + (reg)) -#define RREG32(reg) rdev->mm_rreg(rdev, (reg)) -#define WREG32(reg, v) rdev->mm_wreg(rdev, (reg), (v)) +#define RREG32(reg) r100_mm_rreg(rdev, (reg)) +#define WREG32(reg, v) r100_mm_wreg(rdev, (reg), (v)) #define REG_SET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK) #define REG_GET(FIELD, v) (((v) << FIELD##_SHIFT) & FIELD##_MASK) #define RREG32_PLL(reg) rdev->pll_rreg(rdev, (reg)) #define WREG32_PLL(reg, v) rdev->pll_wreg(rdev, (reg), (v)) #define RREG32_MC(reg) rdev->mc_rreg(rdev, (reg)) #define WREG32_MC(reg, v) rdev->mc_wreg(rdev, (reg), (v)) -#define RREG32_PCIE(reg) rdev->pcie_rreg(rdev, (reg)) -#define WREG32_PCIE(reg, v) rdev->pcie_wreg(rdev, (reg), (v)) +#define RREG32_PCIE(reg) rv370_pcie_rreg(rdev, (reg)) +#define WREG32_PCIE(reg, v) rv370_pcie_wreg(rdev, (reg), (v)) #define WREG32_P(reg, val, mask) \ do { \ uint32_t tmp_ = RREG32(reg); \ @@ -737,6 +754,24 @@ int radeon_gpu_wait_for_idle(struct radeon_device *rdev); WREG32_PLL(reg, tmp_); \ } while (0) +/* + * Indirect registers accessor + */ +static inline uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg) +{ + uint32_t r; + + WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask)); + r = RREG32(RADEON_PCIE_DATA); + return r; +} + +static inline void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) +{ + WREG32(RADEON_PCIE_INDEX, ((reg) & rdev->pcie_reg_mask)); + WREG32(RADEON_PCIE_DATA, (v)); +} + void r100_pll_errata_after_index(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 9ff6dcb97f9d..7693f7c67bd3 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -225,25 +225,18 @@ void radeon_invalid_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) void radeon_register_accessor_init(struct radeon_device *rdev) { - rdev->mm_rreg = &r100_mm_rreg; - rdev->mm_wreg = &r100_mm_wreg; rdev->mc_rreg = &radeon_invalid_rreg; rdev->mc_wreg = &radeon_invalid_wreg; rdev->pll_rreg = &radeon_invalid_rreg; rdev->pll_wreg = &radeon_invalid_wreg; - rdev->pcie_rreg = &radeon_invalid_rreg; - rdev->pcie_wreg = &radeon_invalid_wreg; rdev->pciep_rreg = &radeon_invalid_rreg; rdev->pciep_wreg = &radeon_invalid_wreg; /* Don't change order as we are overridding accessor. */ if (rdev->family < CHIP_RV515) { - rdev->pcie_rreg = &rv370_pcie_rreg; - rdev->pcie_wreg = &rv370_pcie_wreg; - } - if (rdev->family >= CHIP_RV515) { - rdev->pcie_rreg = &rv515_pcie_rreg; - rdev->pcie_wreg = &rv515_pcie_wreg; + rdev->pcie_reg_mask = 0xff; + } else { + rdev->pcie_reg_mask = 0x7ff; } /* FIXME: not sure here */ if (rdev->family <= CHIP_R580) { diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index fd8f3ca716ea..31a7f668ae5a 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -400,25 +400,6 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) WREG32(MC_IND_INDEX, 0); } -uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg) -{ - uint32_t r; - - WREG32(PCIE_INDEX, ((reg) & 0x7ff)); - (void)RREG32(PCIE_INDEX); - r = RREG32(PCIE_DATA); - return r; -} - -void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) -{ - WREG32(PCIE_INDEX, ((reg) & 0x7ff)); - (void)RREG32(PCIE_INDEX); - WREG32(PCIE_DATA, (v)); - (void)RREG32(PCIE_DATA); -} - - /* * Debugfs info */ From b2add73dbf93fd50f00564d7abc3e2b9aa9dd20c Mon Sep 17 00:00:00 2001 From: Guillaume Knispel Date: Sat, 15 Aug 2009 19:30:24 +0200 Subject: [PATCH 158/338] poll/select: initialize triggered field of struct poll_wqueues The triggered field of struct poll_wqueues introduced in commit 5f820f648c92a5ecc771a96b3c29aa6e90013bba ("poll: allow f_op->poll to sleep"). It was first set to 1 in pollwake() (now __pollwake() ), tested and later set to 0 in poll_schedule_timeout(), but not initialized before. As a result when the process needs to sleep, triggered was likely to be non-zero even if pollwake() is not called before the first poll_schedule_timeout(), meaning schedule_hrtimeout_range() would not be called and an extra loop calling all ->poll() would be done. This patch initialize triggered to 0 in poll_initwait() so the ->poll() are not called twice before the process goes to sleep when it needs to. Signed-off-by: Guillaume Knispel Acked-by: Thomas Gleixner Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/select.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/select.c b/fs/select.c index d870237e42c7..8084834e123e 100644 --- a/fs/select.c +++ b/fs/select.c @@ -110,6 +110,7 @@ void poll_initwait(struct poll_wqueues *pwq) { init_poll_funcptr(&pwq->pt, __pollwait); pwq->polling_task = current; + pwq->triggered = 0; pwq->error = 0; pwq->table = NULL; pwq->inline_index = 0; From 64c6460875957502541a4ba30835ac625a0bee79 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Aug 2009 15:49:43 +0000 Subject: [PATCH 159/338] cnic: Fix symbol_put_addr() panic on ia64. When the cnic driver tries to grab a symbol from bnx2 when bnx2 is running init code, symbol_get() will succeed but symbol_put_addr() will hit BUG() a moment later. module_text_address() fails because bnx2 is still in init code. This is fixed by using symbol_put() instead which does the exact opposite of symbol_get(). Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/cnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 4869d77cbe91..ecde186fccd6 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2543,7 +2543,7 @@ static struct cnic_dev *init_bnx2_cnic(struct net_device *dev) probe = symbol_get(bnx2_cnic_probe); if (probe) { ethdev = (*probe)(dev); - symbol_put_addr(probe); + symbol_put(bnx2_cnic_probe); } if (!ethdev) return NULL; From a3059b12adae868c42629ecf058a94195ef1e958 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Aug 2009 15:49:44 +0000 Subject: [PATCH 160/338] cnic: Refine registration with bnx2. Register and unregister with bnx2 during NETDEV_UP and NETDEV_DOWN events. This simplifies the sequence of events and allows locking fixes in the next patch. Signed-off-by: Michael Chan Reviewed-by: Benjamin Li Signed-off-by: David S. Miller --- drivers/net/cnic.c | 51 +++++++++++++++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 14 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index ecde186fccd6..2db81f0e4f72 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2393,6 +2393,37 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev) return 0; } +static int cnic_register_netdev(struct cnic_dev *dev) +{ + struct cnic_local *cp = dev->cnic_priv; + struct cnic_eth_dev *ethdev = cp->ethdev; + int err; + + if (!ethdev) + return -ENODEV; + + if (ethdev->drv_state & CNIC_DRV_STATE_REGD) + return 0; + + err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev); + if (err) + printk(KERN_ERR PFX "%s: register_cnic failed\n", + dev->netdev->name); + + return err; +} + +static void cnic_unregister_netdev(struct cnic_dev *dev) +{ + struct cnic_local *cp = dev->cnic_priv; + struct cnic_eth_dev *ethdev = cp->ethdev; + + if (!ethdev) + return; + + ethdev->drv_unregister_cnic(dev->netdev); +} + static int cnic_start_hw(struct cnic_dev *dev) { struct cnic_local *cp = dev->cnic_priv; @@ -2402,13 +2433,6 @@ static int cnic_start_hw(struct cnic_dev *dev) if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) return -EALREADY; - err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev); - if (err) { - printk(KERN_ERR PFX "%s: register_cnic failed\n", - dev->netdev->name); - goto err2; - } - dev->regview = ethdev->io_base; cp->chip_id = ethdev->chip_id; pci_dev_get(dev->pcidev); @@ -2438,18 +2462,13 @@ static int cnic_start_hw(struct cnic_dev *dev) return 0; err1: - ethdev->drv_unregister_cnic(dev->netdev); cp->free_resc(dev); pci_dev_put(dev->pcidev); -err2: return err; } static void cnic_stop_bnx2_hw(struct cnic_dev *dev) { - struct cnic_local *cp = dev->cnic_priv; - struct cnic_eth_dev *ethdev = cp->ethdev; - cnic_disable_bnx2_int_sync(dev); cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0); @@ -2461,8 +2480,6 @@ static void cnic_stop_bnx2_hw(struct cnic_dev *dev) cnic_setup_5709_context(dev, 0); cnic_free_irq(dev); - ethdev->drv_unregister_cnic(dev->netdev); - cnic_free_resc(dev); } @@ -2646,6 +2663,10 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, else if (event == NETDEV_UNREGISTER) cnic_ulp_exit(dev); else if (event == NETDEV_UP) { + if (cnic_register_netdev(dev) != 0) { + cnic_put(dev); + goto done; + } mutex_lock(&cnic_lock); if (!cnic_start_hw(dev)) cnic_ulp_start(dev); @@ -2672,6 +2693,7 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, cnic_ulp_stop(dev); cnic_stop_hw(dev); mutex_unlock(&cnic_lock); + cnic_unregister_netdev(dev); } else if (event == NETDEV_UNREGISTER) { write_lock(&cnic_dev_lock); list_del_init(&dev->list); @@ -2703,6 +2725,7 @@ static void cnic_release(void) } cnic_ulp_exit(dev); + cnic_unregister_netdev(dev); list_del_init(&dev->list); cnic_free_dev(dev); } From c5a889508203446c1abc1d670599b3a816841813 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Aug 2009 15:49:45 +0000 Subject: [PATCH 161/338] bnx2: Use mutex on slow path cnic calls. The slow path calls to the cnic driver are sleepable calls so we cannot use rcu_read_lock(). Use mutex for these slow path calls instead. Signed-off-by: Michael Chan Reviewed-by: Benjamin Li Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 17 +++++++++++------ drivers/net/bnx2.h | 1 + 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index b70cc99962fc..06b901152d44 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -399,9 +399,11 @@ static int bnx2_unregister_cnic(struct net_device *dev) struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + mutex_lock(&bp->cnic_lock); cp->drv_state = 0; bnapi->cnic_present = 0; rcu_assign_pointer(bp->cnic_ops, NULL); + mutex_unlock(&bp->cnic_lock); synchronize_rcu(); return 0; } @@ -429,13 +431,13 @@ bnx2_cnic_stop(struct bnx2 *bp) struct cnic_ops *c_ops; struct cnic_ctl_info info; - rcu_read_lock(); - c_ops = rcu_dereference(bp->cnic_ops); + mutex_lock(&bp->cnic_lock); + c_ops = bp->cnic_ops; if (c_ops) { info.cmd = CNIC_CTL_STOP_CMD; c_ops->cnic_ctl(bp->cnic_data, &info); } - rcu_read_unlock(); + mutex_unlock(&bp->cnic_lock); } static void @@ -444,8 +446,8 @@ bnx2_cnic_start(struct bnx2 *bp) struct cnic_ops *c_ops; struct cnic_ctl_info info; - rcu_read_lock(); - c_ops = rcu_dereference(bp->cnic_ops); + mutex_lock(&bp->cnic_lock); + c_ops = bp->cnic_ops; if (c_ops) { if (!(bp->flags & BNX2_FLAG_USING_MSIX)) { struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; @@ -455,7 +457,7 @@ bnx2_cnic_start(struct bnx2 *bp) info.cmd = CNIC_CTL_START_CMD; c_ops->cnic_ctl(bp->cnic_data, &info); } - rcu_read_unlock(); + mutex_unlock(&bp->cnic_lock); } #else @@ -7663,6 +7665,9 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) spin_lock_init(&bp->phy_lock); spin_lock_init(&bp->indirect_lock); +#ifdef BCM_CNIC + mutex_init(&bp->cnic_lock); +#endif INIT_WORK(&bp->reset_task, bnx2_reset_task); dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index f1edfaa9e56a..a4f12fd0ecd2 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6902,6 +6902,7 @@ struct bnx2 { u32 idle_chk_status_idx; #ifdef BCM_CNIC + struct mutex cnic_lock; struct cnic_eth_dev cnic_eth_dev; #endif From 681dbd710779e8b8d5bae926f6b11f30df70638b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Aug 2009 15:49:46 +0000 Subject: [PATCH 162/338] cnic: Fix locking in start/stop calls. The slow path ulp_start and ulp_stop calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and setting a bit during these calls. cnic_unregister_device() will now wait for the bit to clear before completing the call. Signed-off-by: Michael Chan Reviewed-by: Benjamin Li Signed-off-by: David S. Miller --- drivers/net/cnic.c | 44 ++++++++++++++++++++++++++++---------------- drivers/net/cnic.h | 1 + 2 files changed, 29 insertions(+), 16 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 2db81f0e4f72..4ff618a7afd2 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -466,6 +466,7 @@ EXPORT_SYMBOL(cnic_register_driver); static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type) { struct cnic_local *cp = dev->cnic_priv; + int i = 0; if (ulp_type >= MAX_CNIC_ULP_TYPE) { printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n", @@ -486,6 +487,15 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type) synchronize_rcu(); + while (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]) && + i < 20) { + msleep(100); + i++; + } + if (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type])) + printk(KERN_WARNING PFX "%s: Failed waiting for ULP up call" + " to complete.\n", dev->netdev->name); + return 0; } EXPORT_SYMBOL(cnic_unregister_driver); @@ -1076,18 +1086,23 @@ static void cnic_ulp_stop(struct cnic_dev *dev) if (cp->cnic_uinfo) cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL); - rcu_read_lock(); for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) { struct cnic_ulp_ops *ulp_ops; - ulp_ops = rcu_dereference(cp->ulp_ops[if_type]); - if (!ulp_ops) + mutex_lock(&cnic_lock); + ulp_ops = cp->ulp_ops[if_type]; + if (!ulp_ops) { + mutex_unlock(&cnic_lock); continue; + } + set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]); + mutex_unlock(&cnic_lock); if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type])) ulp_ops->cnic_stop(cp->ulp_handle[if_type]); + + clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]); } - rcu_read_unlock(); } static void cnic_ulp_start(struct cnic_dev *dev) @@ -1095,18 +1110,23 @@ static void cnic_ulp_start(struct cnic_dev *dev) struct cnic_local *cp = dev->cnic_priv; int if_type; - rcu_read_lock(); for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) { struct cnic_ulp_ops *ulp_ops; - ulp_ops = rcu_dereference(cp->ulp_ops[if_type]); - if (!ulp_ops || !ulp_ops->cnic_start) + mutex_lock(&cnic_lock); + ulp_ops = cp->ulp_ops[if_type]; + if (!ulp_ops || !ulp_ops->cnic_start) { + mutex_unlock(&cnic_lock); continue; + } + set_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]); + mutex_unlock(&cnic_lock); if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type])) ulp_ops->cnic_start(cp->ulp_handle[if_type]); + + clear_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[if_type]); } - rcu_read_unlock(); } static int cnic_ctl(void *data, struct cnic_ctl_info *info) @@ -1116,22 +1136,18 @@ static int cnic_ctl(void *data, struct cnic_ctl_info *info) switch (info->cmd) { case CNIC_CTL_STOP_CMD: cnic_hold(dev); - mutex_lock(&cnic_lock); cnic_ulp_stop(dev); cnic_stop_hw(dev); - mutex_unlock(&cnic_lock); cnic_put(dev); break; case CNIC_CTL_START_CMD: cnic_hold(dev); - mutex_lock(&cnic_lock); if (!cnic_start_hw(dev)) cnic_ulp_start(dev); - mutex_unlock(&cnic_lock); cnic_put(dev); break; default: @@ -2667,10 +2683,8 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, cnic_put(dev); goto done; } - mutex_lock(&cnic_lock); if (!cnic_start_hw(dev)) cnic_ulp_start(dev); - mutex_unlock(&cnic_lock); } rcu_read_lock(); @@ -2689,10 +2703,8 @@ static int cnic_netdev_event(struct notifier_block *this, unsigned long event, rcu_read_unlock(); if (event == NETDEV_GOING_DOWN) { - mutex_lock(&cnic_lock); cnic_ulp_stop(dev); cnic_stop_hw(dev); - mutex_unlock(&cnic_lock); cnic_unregister_netdev(dev); } else if (event == NETDEV_UNREGISTER) { write_lock(&cnic_dev_lock); diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h index 5192d4a9df5a..a94b302bb464 100644 --- a/drivers/net/cnic.h +++ b/drivers/net/cnic.h @@ -176,6 +176,7 @@ struct cnic_local { unsigned long ulp_flags[MAX_CNIC_ULP_TYPE]; #define ULP_F_INIT 0 #define ULP_F_START 1 +#define ULP_F_CALL_PENDING 2 struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE]; /* protected by ulp_lock */ From 7fc1ece40704b150477e548a7a98d285cc418790 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 14 Aug 2009 15:49:47 +0000 Subject: [PATCH 163/338] cnic: Fix locking in init/exit calls. The slow path ulp_init and ulp_exit calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and refcount during these calls. cnic_unregister_driver() will now wait for the refcount to go to zero before completing the call. Signed-off-by: Michael Chan Reviewed-by: Benjamin Li Signed-off-by: David S. Miller --- drivers/net/cnic.c | 48 +++++++++++++++++++++++++++++++++++-------- drivers/net/cnic_if.h | 1 + 2 files changed, 40 insertions(+), 9 deletions(-) diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 4ff618a7afd2..74c342959b7b 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -138,6 +138,16 @@ static struct cnic_dev *cnic_from_netdev(struct net_device *netdev) return NULL; } +static inline void ulp_get(struct cnic_ulp_ops *ulp_ops) +{ + atomic_inc(&ulp_ops->ref_count); +} + +static inline void ulp_put(struct cnic_ulp_ops *ulp_ops) +{ + atomic_dec(&ulp_ops->ref_count); +} + static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val) { struct cnic_local *cp = dev->cnic_priv; @@ -358,6 +368,7 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops) } read_unlock(&cnic_dev_lock); + atomic_set(&ulp_ops->ref_count, 0); rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops); mutex_unlock(&cnic_lock); @@ -379,6 +390,8 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops) int cnic_unregister_driver(int ulp_type) { struct cnic_dev *dev; + struct cnic_ulp_ops *ulp_ops; + int i = 0; if (ulp_type >= MAX_CNIC_ULP_TYPE) { printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n", @@ -386,7 +399,8 @@ int cnic_unregister_driver(int ulp_type) return -EINVAL; } mutex_lock(&cnic_lock); - if (!cnic_ulp_tbl[ulp_type]) { + ulp_ops = cnic_ulp_tbl[ulp_type]; + if (!ulp_ops) { printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not " "been registered\n", ulp_type); goto out_unlock; @@ -411,6 +425,14 @@ int cnic_unregister_driver(int ulp_type) mutex_unlock(&cnic_lock); synchronize_rcu(); + while ((atomic_read(&ulp_ops->ref_count) != 0) && (i < 20)) { + msleep(100); + i++; + } + + if (atomic_read(&ulp_ops->ref_count) != 0) + printk(KERN_WARNING PFX "%s: Failed waiting for ref count to go" + " to zero.\n", dev->netdev->name); return 0; out_unlock: @@ -1161,19 +1183,23 @@ static void cnic_ulp_init(struct cnic_dev *dev) int i; struct cnic_local *cp = dev->cnic_priv; - rcu_read_lock(); for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) { struct cnic_ulp_ops *ulp_ops; - ulp_ops = rcu_dereference(cnic_ulp_tbl[i]); - if (!ulp_ops || !ulp_ops->cnic_init) + mutex_lock(&cnic_lock); + ulp_ops = cnic_ulp_tbl[i]; + if (!ulp_ops || !ulp_ops->cnic_init) { + mutex_unlock(&cnic_lock); continue; + } + ulp_get(ulp_ops); + mutex_unlock(&cnic_lock); if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i])) ulp_ops->cnic_init(dev); + ulp_put(ulp_ops); } - rcu_read_unlock(); } static void cnic_ulp_exit(struct cnic_dev *dev) @@ -1181,19 +1207,23 @@ static void cnic_ulp_exit(struct cnic_dev *dev) int i; struct cnic_local *cp = dev->cnic_priv; - rcu_read_lock(); for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) { struct cnic_ulp_ops *ulp_ops; - ulp_ops = rcu_dereference(cnic_ulp_tbl[i]); - if (!ulp_ops || !ulp_ops->cnic_exit) + mutex_lock(&cnic_lock); + ulp_ops = cnic_ulp_tbl[i]; + if (!ulp_ops || !ulp_ops->cnic_exit) { + mutex_unlock(&cnic_lock); continue; + } + ulp_get(ulp_ops); + mutex_unlock(&cnic_lock); if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i])) ulp_ops->cnic_exit(dev); + ulp_put(ulp_ops); } - rcu_read_unlock(); } static int cnic_cm_offload_pg(struct cnic_sock *csk) diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h index d1bce27ee99e..a49235739eef 100644 --- a/drivers/net/cnic_if.h +++ b/drivers/net/cnic_if.h @@ -290,6 +290,7 @@ struct cnic_ulp_ops { void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type, char *data, u16 data_size); struct module *owner; + atomic_t ref_count; }; extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops); From 82776a4bcd7aa5fbcd2e6339b3ce88b727dd40ab Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 14 Aug 2009 14:35:33 +0000 Subject: [PATCH 164/338] e1000e: WoL does not work on 82577/82578 with manageability enabled With manageability (Intel AMT) enabled via BIOS, PHY wakeup does not get configured on newer parts which use PHY wakeup vs. MAC wakeup which causes WoL to not work. The driver should configure PHY wakeup whether or not manageability is enabled. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 63415bb6f48f..58e22fcb22b5 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4538,8 +4538,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) /* Allow time for pending master requests to run */ e1000e_disable_pcie_master(&adapter->hw); - if ((adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) && - !(hw->mac.ops.check_mng_mode(hw))) { + if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) { /* enable wakeup by the PHY */ retval = e1000_init_phy_wakeup(adapter, wufc); if (retval) @@ -4557,7 +4556,8 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake) *enable_wake = !!wufc; /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->flags & FLAG_MNG_PT_ENABLED) + if ((adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) *enable_wake = true; if (adapter->hw.phy.type == e1000_phy_igp_3) From 68eac4602b9104cdaa6c18b3edd914cececa6a1e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Fri, 14 Aug 2009 14:35:52 +0000 Subject: [PATCH 165/338] e1000e: fix use of pci_enable_pcie_error_reporting commit 111b9dc5 ("e1000e: add aer support") introduces pcie aer support for e1000e, but it is not reasonable to disable it in e1000_remove but enable it in e1000_resume. This patch enables aer support in e1000_probe. Signed-off-by: Xiaotian Feng Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 58e22fcb22b5..fa92a683aefd 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4670,14 +4670,6 @@ static int e1000_resume(struct pci_dev *pdev) return err; } - /* AER (Advanced Error Reporting) hooks */ - err = pci_enable_pcie_error_reporting(pdev); - if (err) { - dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " - "0x%x\n", err); - /* non-fatal, continue */ - } - pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -4990,6 +4982,14 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (err) goto err_pci_reg; + /* AER (Advanced Error Reporting) hooks */ + err = pci_enable_pcie_error_reporting(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " + "0x%x\n", err); + /* non-fatal, continue */ + } + pci_set_master(pdev); /* PCI config space info */ err = pci_save_state(pdev); From 4e5c25d405e18a2f279ca2bfc855508ec3a0186b Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sun, 16 Aug 2009 15:54:37 +0100 Subject: [PATCH 166/338] x86, mce: therm_throt: Don't log redundant normality 0d01f31439c1e4d602bf9fdc924ab66f407f5e38 "x86, mce: therm_throt - change when we print messages" removed redundant announcements of "Temperature/speed normal". They're not worth logging and remove their accompanying "Machine check events logged" messages as well from the console. Signed-off-by: Hugh Dickins Cc: Hidetoshi Seto Cc: Andi Kleen Cc: Dmitry Torokhov LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/therm_throt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 8bc64cfbe936..5957a93e5173 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -116,11 +116,14 @@ static int therm_throt_process(int curr) cpu, __get_cpu_var(thermal_throttle_count)); add_taint(TAINT_MACHINE_CHECK); - } else if (was_throttled) { + return 1; + } + if (was_throttled) { printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu); + return 1; } - return 1; + return 0; } #ifdef CONFIG_SYSFS From 894ef820b10d77e2d6d717342fc408bdd9825139 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 16 Aug 2009 07:33:30 -0700 Subject: [PATCH 167/338] dm-log-userspace: fix printk format warning drivers/md/dm-log-userspace-transfer.c:110: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'size_t' Previously posted and acked, but apparently lost. http://lkml.indiana.edu/hypermail/linux/kernel/0906.2/02074.html Signed-off-by: Randy Dunlap Cc: dm-devel@redhat.com Signed-off-by: Linus Torvalds --- drivers/md/dm-log-userspace-transfer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-log-userspace-transfer.c b/drivers/md/dm-log-userspace-transfer.c index 0ca1ee768a1f..8ce74d95ae4d 100644 --- a/drivers/md/dm-log-userspace-transfer.c +++ b/drivers/md/dm-log-userspace-transfer.c @@ -108,7 +108,7 @@ static int fill_pkg(struct cn_msg *msg, struct dm_ulog_request *tfr) *(pkg->data_size) = 0; } else if (tfr->data_size > *(pkg->data_size)) { DMERR("Insufficient space to receive package [%u] " - "(%u vs %lu)", tfr->request_type, + "(%u vs %zu)", tfr->request_type, tfr->data_size, *(pkg->data_size)); *(pkg->data_size) = 0; From 52459ab91363343af8ae252766e9da762344a2e7 Mon Sep 17 00:00:00 2001 From: Leonardo Potenza Date: Sun, 16 Aug 2009 18:55:48 +0200 Subject: [PATCH 168/338] x86: Annotate section mismatch warnings in kernel/apic/x2apic_uv_x.c The function uv_acpi_madt_oem_check() has been marked __init, the struct apic_x2apic_uv_x has been marked __refdata. The aim is to address the following section mismatch messages: WARNING: arch/x86/kernel/apic/built-in.o(.data+0x1368): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/x86/kernel/built-in.o(.data+0x68e8): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: arch/x86/built-in.o(.text+0x7b36f): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_ioremap() The function uv_acpi_madt_oem_check() references the function __init early_ioremap(). This is often because uv_acpi_madt_oem_check lacks a __init annotation or the annotation of early_ioremap is wrong. WARNING: arch/x86/built-in.o(.text+0x7b38d): Section mismatch in reference from the function uv_acpi_madt_oem_check() to the function .init.text:early_iounmap() The function uv_acpi_madt_oem_check() references the function __init early_iounmap(). This is often because uv_acpi_madt_oem_check lacks a __init annotation or the annotation of early_iounmap is wrong. WARNING: arch/x86/built-in.o(.data+0x8668): Section mismatch in reference from the variable apic_x2apic_uv_x to the function .cpuinit.text:uv_wakeup_secondary() The variable apic_x2apic_uv_x references the function __cpuinit uv_wakeup_secondary() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Leonardo Potenza LKML-Reference: <200908161855.48302.lpotenza@inwind.it> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 832e908adcb5..601159374e87 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -46,7 +46,7 @@ static int early_get_nodeid(void) return node_id.s.node_id; } -static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { if (!strcmp(oem_table_id, "UVL")) @@ -253,7 +253,7 @@ static void uv_send_IPI_self(int vector) apic_write(APIC_SELF_IPI, vector); } -struct apic apic_x2apic_uv_x = { +struct apic __refdata apic_x2apic_uv_x = { .name = "UV large system", .probe = NULL, From cefb87efc9aa0288849149484870d5ab989fbd59 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Sun, 16 Aug 2009 21:05:45 +1000 Subject: [PATCH 169/338] drm/radeon/kms: implement bo busy check + current domain This implements the busy ioctl along with a current domain check. returns 0 or -EBUSY puts the current domain no matter what the answer. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_gem.c | 22 +++++++++++++++++++++- drivers/gpu/drm/radeon/radeon_object.c | 19 +++++++++++++++++++ include/drm/radeon_drm.h | 2 +- 4 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 87170a56e37b..79ad98264e33 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -242,6 +242,7 @@ int radeon_object_pin(struct radeon_object *robj, uint32_t domain, uint64_t *gpu_addr); void radeon_object_unpin(struct radeon_object *robj); int radeon_object_wait(struct radeon_object *robj); +int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement); int radeon_object_evict_vram(struct radeon_device *rdev); int radeon_object_mmap(struct radeon_object *robj, uint64_t *offset); void radeon_object_force_delete(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index cded5180c752..d4ceff13bbb1 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -262,7 +262,27 @@ int radeon_gem_mmap_ioctl(struct drm_device *dev, void *data, int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) { - /* FIXME: implement */ + struct drm_radeon_gem_busy *args = data; + struct drm_gem_object *gobj; + struct radeon_object *robj; + int r; + uint32_t cur_placement; + + gobj = drm_gem_object_lookup(dev, filp, args->handle); + if (gobj == NULL) { + return -EINVAL; + } + robj = gobj->driver_private; + r = radeon_object_busy_domain(robj, &cur_placement); + if (cur_placement == TTM_PL_VRAM) + args->domain = RADEON_GEM_DOMAIN_VRAM; + if (cur_placement == TTM_PL_FLAG_TT) + args->domain = RADEON_GEM_DOMAIN_GTT; + if (cur_placement == TTM_PL_FLAG_SYSTEM) + args->domain = RADEON_GEM_DOMAIN_CPU; + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(gobj); + mutex_unlock(&dev->struct_mutex); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index e98cae3bf4a6..b85fb83d7ae8 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -316,6 +316,25 @@ int radeon_object_wait(struct radeon_object *robj) return r; } +int radeon_object_busy_domain(struct radeon_object *robj, uint32_t *cur_placement) +{ + int r = 0; + + r = radeon_object_reserve(robj, true); + if (unlikely(r != 0)) { + DRM_ERROR("radeon: failed to reserve object for waiting.\n"); + return r; + } + spin_lock(&robj->tobj.lock); + *cur_placement = robj->tobj.mem.mem_type; + if (robj->tobj.sync_obj) { + r = ttm_bo_wait(&robj->tobj, true, true, true); + } + spin_unlock(&robj->tobj.lock); + radeon_object_unreserve(robj); + return r; +} + int radeon_object_evict_vram(struct radeon_device *rdev) { if (rdev->flags & RADEON_IS_IGP) { diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index af4b4826997e..f81c3232accd 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -838,7 +838,7 @@ struct drm_radeon_gem_wait_idle { struct drm_radeon_gem_busy { uint32_t handle; - uint32_t busy; + uint32_t domain; }; struct drm_radeon_gem_pread { From 9c0d90103c7e0eb6e638e5b649e9f6d8d9c1b4b3 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 31 Jul 2009 12:53:58 -0400 Subject: [PATCH 170/338] Capabilities: move cap_file_mmap to commoncap.c Currently we duplicate the mmap_min_addr test in cap_file_mmap and in security_file_mmap if !CONFIG_SECURITY. This patch moves cap_file_mmap into commoncap.c and then calls that function directly from security_file_mmap ifndef CONFIG_SECURITY like all of the other capability checks are done. Signed-off-by: Eric Paris Acked-by: Serge Hallyn Signed-off-by: James Morris --- include/linux/security.h | 7 ++++--- security/capability.c | 9 --------- security/commoncap.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 34 insertions(+), 12 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index 5eff459b3833..ac4bc3760b46 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -66,6 +66,9 @@ extern int cap_inode_setxattr(struct dentry *dentry, const char *name, extern int cap_inode_removexattr(struct dentry *dentry, const char *name); extern int cap_inode_need_killpriv(struct dentry *dentry); extern int cap_inode_killpriv(struct dentry *dentry); +extern int cap_file_mmap(struct file *file, unsigned long reqprot, + unsigned long prot, unsigned long flags, + unsigned long addr, unsigned long addr_only); extern int cap_task_fix_setuid(struct cred *new, const struct cred *old, int flags); extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5); @@ -2197,9 +2200,7 @@ static inline int security_file_mmap(struct file *file, unsigned long reqprot, unsigned long addr, unsigned long addr_only) { - if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO)) - return -EACCES; - return 0; + return cap_file_mmap(file, reqprot, prot, flags, addr, addr_only); } static inline int security_file_mprotect(struct vm_area_struct *vma, diff --git a/security/capability.c b/security/capability.c index 21b6cead6a8e..88f752e8152c 100644 --- a/security/capability.c +++ b/security/capability.c @@ -330,15 +330,6 @@ static int cap_file_ioctl(struct file *file, unsigned int command, return 0; } -static int cap_file_mmap(struct file *file, unsigned long reqprot, - unsigned long prot, unsigned long flags, - unsigned long addr, unsigned long addr_only) -{ - if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO)) - return -EACCES; - return 0; -} - static int cap_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, unsigned long prot) { diff --git a/security/commoncap.c b/security/commoncap.c index 48b7e0228fa3..6bcf6e81e547 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -984,3 +984,33 @@ int cap_vm_enough_memory(struct mm_struct *mm, long pages) cap_sys_admin = 1; return __vm_enough_memory(mm, pages, cap_sys_admin); } + +/* + * cap_file_mmap - check if able to map given addr + * @file: unused + * @reqprot: unused + * @prot: unused + * @flags: unused + * @addr: address attempting to be mapped + * @addr_only: unused + * + * If the process is attempting to map memory below mmap_min_addr they need + * CAP_SYS_RAWIO. The other parameters to this function are unused by the + * capability security module. Returns 0 if this mapping should be allowed + * -EPERM if not. + */ +int cap_file_mmap(struct file *file, unsigned long reqprot, + unsigned long prot, unsigned long flags, + unsigned long addr, unsigned long addr_only) +{ + int ret = 0; + + if (addr < mmap_min_addr) { + ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO, + SECURITY_CAP_AUDIT); + /* set PF_SUPERPRIV if it turns out we allow the low mmap */ + if (ret == 0) + current->flags |= PF_SUPERPRIV; + } + return ret; +} From 8cf948e744e0218af604c32edecde10006dc8e9e Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 31 Jul 2009 12:54:05 -0400 Subject: [PATCH 171/338] SELinux: call cap_file_mmap in selinux_file_mmap Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook. This means there is no DAC check on the ability to mmap low addresses in the memory space. This function adds the DAC check for CAP_SYS_RAWIO while maintaining the selinux check on mmap_zero. This means that processes which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will NOT need the SELinux sys_rawio capability. Signed-off-by: Eric Paris Signed-off-by: James Morris --- security/selinux/hooks.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 1e8cfc4c2ed6..e6d1432b0800 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3030,9 +3030,21 @@ static int selinux_file_mmap(struct file *file, unsigned long reqprot, int rc = 0; u32 sid = current_sid(); - if (addr < mmap_min_addr) + /* + * notice that we are intentionally putting the SELinux check before + * the secondary cap_file_mmap check. This is such a likely attempt + * at bad behaviour/exploit that we always want to get the AVC, even + * if DAC would have also denied the operation. + */ + if (addr < mmap_min_addr) { rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT, MEMPROTECT__MMAP_ZERO, NULL); + if (rc) + return rc; + } + + /* do DAC check on address space usage */ + rc = cap_file_mmap(file, reqprot, prot, flags, addr, addr_only); if (rc || addr_only) return rc; From 788084aba2ab7348257597496befcbccabdc98a3 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 31 Jul 2009 12:54:11 -0400 Subject: [PATCH 172/338] Security/SELinux: seperate lsm specific mmap_min_addr Currently SELinux enforcement of controls on the ability to map low memory is determined by the mmap_min_addr tunable. This patch causes SELinux to ignore the tunable and instead use a seperate Kconfig option specific to how much space the LSM should protect. The tunable will now only control the need for CAP_SYS_RAWIO and SELinux permissions will always protect the amount of low memory designated by CONFIG_LSM_MMAP_MIN_ADDR. This allows users who need to disable the mmap_min_addr controls (usual reason being they run WINE as a non-root user) to do so and still have SELinux controls preventing confined domains (like a web server) from being able to map some area of low memory. Signed-off-by: Eric Paris Signed-off-by: James Morris --- include/linux/mm.h | 15 ------------ include/linux/security.h | 17 ++++++++++++++ kernel/sysctl.c | 7 +++--- mm/Kconfig | 6 ++--- mm/mmap.c | 3 --- mm/nommu.c | 3 --- security/Kconfig | 16 +++++++++++++ security/Makefile | 2 +- security/commoncap.c | 2 +- security/min_addr.c | 49 ++++++++++++++++++++++++++++++++++++++++ security/selinux/hooks.c | 2 +- 11 files changed, 92 insertions(+), 30 deletions(-) create mode 100644 security/min_addr.c diff --git a/include/linux/mm.h b/include/linux/mm.h index ba3a7cb1eaa0..9a72cc78e6b8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -34,8 +34,6 @@ extern int sysctl_legacy_va_layout; #define sysctl_legacy_va_layout 0 #endif -extern unsigned long mmap_min_addr; - #include #include #include @@ -574,19 +572,6 @@ static inline void set_page_links(struct page *page, enum zone_type zone, set_page_section(page, pfn_to_section_nr(pfn)); } -/* - * If a hint addr is less than mmap_min_addr change hint to be as - * low as possible but still greater than mmap_min_addr - */ -static inline unsigned long round_hint_to_min(unsigned long hint) -{ - hint &= PAGE_MASK; - if (((void *)hint != NULL) && - (hint < mmap_min_addr)) - return PAGE_ALIGN(mmap_min_addr); - return hint; -} - /* * Some inline functions in vmstat.h depend on page_zone() */ diff --git a/include/linux/security.h b/include/linux/security.h index ac4bc3760b46..dc3472c1f781 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -28,6 +28,7 @@ #include #include #include +#include /* PAGE_ALIGN */ #include #include #include @@ -95,6 +96,7 @@ extern int cap_netlink_send(struct sock *sk, struct sk_buff *skb); extern int cap_netlink_recv(struct sk_buff *skb, int cap); extern unsigned long mmap_min_addr; +extern unsigned long dac_mmap_min_addr; /* * Values used in the task_security_ops calls */ @@ -147,6 +149,21 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) opts->num_mnt_opts = 0; } +/* + * If a hint addr is less than mmap_min_addr change hint to be as + * low as possible but still greater than mmap_min_addr + */ +static inline unsigned long round_hint_to_min(unsigned long hint) +{ + hint &= PAGE_MASK; + if (((void *)hint != NULL) && + (hint < mmap_min_addr)) + return PAGE_ALIGN(mmap_min_addr); + return hint; +} + +extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, + void __user *buffer, size_t *lenp, loff_t *ppos); /** * struct security_operations - main security structure * diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 98e02328c67d..58be76017fd0 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -1306,10 +1307,10 @@ static struct ctl_table vm_table[] = { { .ctl_name = CTL_UNNUMBERED, .procname = "mmap_min_addr", - .data = &mmap_min_addr, - .maxlen = sizeof(unsigned long), + .data = &dac_mmap_min_addr, + .maxlen = sizeof(unsigned long), .mode = 0644, - .proc_handler = &proc_doulongvec_minmax, + .proc_handler = &mmap_min_addr_handler, }, #ifdef CONFIG_NUMA { diff --git a/mm/Kconfig b/mm/Kconfig index c948d4ca8bde..fe5f674d7a7d 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -225,9 +225,9 @@ config DEFAULT_MMAP_MIN_ADDR For most ia64, ppc64 and x86 users with lots of address space a value of 65536 is reasonable and should cause no problems. On arm and other archs it should not be higher than 32768. - Programs which use vm86 functionality would either need additional - permissions from either the LSM or the capabilities module or have - this protection disabled. + Programs which use vm86 functionality or have some need to map + this low address space will need CAP_SYS_RAWIO or disable this + protection by setting the value to 0. This value can be changed after boot using the /proc/sys/vm/mmap_min_addr tunable. diff --git a/mm/mmap.c b/mm/mmap.c index 34579b23ebd5..8101de490c73 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -88,9 +88,6 @@ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; struct percpu_counter vm_committed_as; -/* amount of vm to protect from userspace access */ -unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR; - /* * Check that a process has enough memory to allocate a new virtual * mapping. 0 means there is enough memory for the allocation to diff --git a/mm/nommu.c b/mm/nommu.c index 53cab10fece4..28754c40be98 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -69,9 +69,6 @@ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS; int heap_stack_gap = 0; -/* amount of vm to protect from userspace access */ -unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR; - atomic_long_t mmap_pages_allocated; EXPORT_SYMBOL(mem_map); diff --git a/security/Kconfig b/security/Kconfig index d23c839038f0..9c60c346a91d 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -113,6 +113,22 @@ config SECURITY_ROOTPLUG If you are unsure how to answer this question, answer N. +config LSM_MMAP_MIN_ADDR + int "Low address space for LSM to from user allocation" + depends on SECURITY && SECURITY_SELINUX + default 65535 + help + This is the portion of low virtual memory which should be protected + from userspace allocation. Keeping a user from writing to low pages + can help reduce the impact of kernel NULL pointer bugs. + + For most ia64, ppc64 and x86 users with lots of address space + a value of 65536 is reasonable and should cause no problems. + On arm and other archs it should not be higher than 32768. + Programs which use vm86 functionality or have some need to map + this low address space will need the permission specific to the + systems running LSM. + source security/selinux/Kconfig source security/smack/Kconfig source security/tomoyo/Kconfig diff --git a/security/Makefile b/security/Makefile index c67557cdaa85..b56e7f9ecbc2 100644 --- a/security/Makefile +++ b/security/Makefile @@ -8,7 +8,7 @@ subdir-$(CONFIG_SECURITY_SMACK) += smack subdir-$(CONFIG_SECURITY_TOMOYO) += tomoyo # always enable default capabilities -obj-y += commoncap.o +obj-y += commoncap.o min_addr.o # Object file lists obj-$(CONFIG_SECURITY) += security.o capability.o diff --git a/security/commoncap.c b/security/commoncap.c index 6bcf6e81e547..e3097c0a1311 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -1005,7 +1005,7 @@ int cap_file_mmap(struct file *file, unsigned long reqprot, { int ret = 0; - if (addr < mmap_min_addr) { + if (addr < dac_mmap_min_addr) { ret = cap_capable(current, current_cred(), CAP_SYS_RAWIO, SECURITY_CAP_AUDIT); /* set PF_SUPERPRIV if it turns out we allow the low mmap */ diff --git a/security/min_addr.c b/security/min_addr.c new file mode 100644 index 000000000000..14cc7b3b8d03 --- /dev/null +++ b/security/min_addr.c @@ -0,0 +1,49 @@ +#include +#include +#include +#include + +/* amount of vm to protect from userspace access by both DAC and the LSM*/ +unsigned long mmap_min_addr; +/* amount of vm to protect from userspace using CAP_SYS_RAWIO (DAC) */ +unsigned long dac_mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR; +/* amount of vm to protect from userspace using the LSM = CONFIG_LSM_MMAP_MIN_ADDR */ + +/* + * Update mmap_min_addr = max(dac_mmap_min_addr, CONFIG_LSM_MMAP_MIN_ADDR) + */ +static void update_mmap_min_addr(void) +{ +#ifdef CONFIG_LSM_MMAP_MIN_ADDR + if (dac_mmap_min_addr > CONFIG_LSM_MMAP_MIN_ADDR) + mmap_min_addr = dac_mmap_min_addr; + else + mmap_min_addr = CONFIG_LSM_MMAP_MIN_ADDR; +#else + mmap_min_addr = dac_mmap_min_addr; +#endif +} + +/* + * sysctl handler which just sets dac_mmap_min_addr = the new value and then + * calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly + */ +int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int ret; + + ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos); + + update_mmap_min_addr(); + + return ret; +} + +int __init init_mmap_min_addr(void) +{ + update_mmap_min_addr(); + + return 0; +} +pure_initcall(init_mmap_min_addr); diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index e6d1432b0800..8d8b69c5664e 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3036,7 +3036,7 @@ static int selinux_file_mmap(struct file *file, unsigned long reqprot, * at bad behaviour/exploit that we always want to get the AVC, even * if DAC would have also denied the operation. */ - if (addr < mmap_min_addr) { + if (addr < CONFIG_LSM_MMAP_MIN_ADDR) { rc = avc_has_perm(sid, sid, SECCLASS_MEMPROTECT, MEMPROTECT__MMAP_ZERO, NULL); if (rc) From 1d9959734a1949ea4f2427bd2d8b21ede6b2441c Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Fri, 7 Aug 2009 14:53:57 -0400 Subject: [PATCH 173/338] security: define round_hint_to_min in !CONFIG_SECURITY Fix the header files to define round_hint_to_min() and to define mmap_min_addr_handler() in the !CONFIG_SECURITY case. Built and tested with !CONFIG_SECURITY Signed-off-by: Eric Paris Signed-off-by: James Morris --- include/linux/security.h | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/include/linux/security.h b/include/linux/security.h index dc3472c1f781..1f16eea2017b 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -121,6 +121,21 @@ struct request_sock; #define LSM_UNSAFE_PTRACE 2 #define LSM_UNSAFE_PTRACE_CAP 4 +/* + * If a hint addr is less than mmap_min_addr change hint to be as + * low as possible but still greater than mmap_min_addr + */ +static inline unsigned long round_hint_to_min(unsigned long hint) +{ + hint &= PAGE_MASK; + if (((void *)hint != NULL) && + (hint < mmap_min_addr)) + return PAGE_ALIGN(mmap_min_addr); + return hint; +} +extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, + void __user *buffer, size_t *lenp, loff_t *ppos); + #ifdef CONFIG_SECURITY struct security_mnt_opts { @@ -149,21 +164,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) opts->num_mnt_opts = 0; } -/* - * If a hint addr is less than mmap_min_addr change hint to be as - * low as possible but still greater than mmap_min_addr - */ -static inline unsigned long round_hint_to_min(unsigned long hint) -{ - hint &= PAGE_MASK; - if (((void *)hint != NULL) && - (hint < mmap_min_addr)) - return PAGE_ALIGN(mmap_min_addr); - return hint; -} - -extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp, - void __user *buffer, size_t *lenp, loff_t *ppos); /** * struct security_operations - main security structure * From bc990f5cb424cdca9dda866785d088e2c2110ecc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 16 Aug 2009 20:36:34 -0400 Subject: [PATCH 174/338] xfs: fix locking in xfs_iget_cache_hit The locking in xfs_iget_cache_hit currently has numerous problems: - we clear the reclaim tag without i_flags_lock which protects modifications to it - we call inode_init_always which can sleep with pag_ici_lock held (this is oss.sgi.com BZ #819) - we acquire and drop i_flags_lock a lot and thus provide no consistency between the various flags we set/clear under it This patch fixes all that with a major revamp of the locking in the function. The new version acquires i_flags_lock early and only drops it once we need to call into inode_init_always or before calling xfs_ilock. This patch fixes a bug seen in the wild where we race modifying the reclaim tag. Signed-off-by: Christoph Hellwig Reviewed-by: Felix Blyakher Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/xfs_sync.c | 13 +++- fs/xfs/linux-2.6/xfs_sync.h | 1 + fs/xfs/xfs_iget.c | 115 ++++++++++++++++++------------------ 3 files changed, 71 insertions(+), 58 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index b619d6b8ca43..98ef624d9baf 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -708,6 +708,16 @@ xfs_reclaim_inode( return 0; } +void +__xfs_inode_set_reclaim_tag( + struct xfs_perag *pag, + struct xfs_inode *ip) +{ + radix_tree_tag_set(&pag->pag_ici_root, + XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino), + XFS_ICI_RECLAIM_TAG); +} + /* * We set the inode flag atomically with the radix tree tag. * Once we get tag lookups on the radix tree, this inode flag @@ -722,8 +732,7 @@ xfs_inode_set_reclaim_tag( read_lock(&pag->pag_ici_lock); spin_lock(&ip->i_flags_lock); - radix_tree_tag_set(&pag->pag_ici_root, - XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG); + __xfs_inode_set_reclaim_tag(pag, ip); __xfs_iflags_set(ip, XFS_IRECLAIMABLE); spin_unlock(&ip->i_flags_lock); read_unlock(&pag->pag_ici_lock); diff --git a/fs/xfs/linux-2.6/xfs_sync.h b/fs/xfs/linux-2.6/xfs_sync.h index 2a10301c99c7..59120602588a 100644 --- a/fs/xfs/linux-2.6/xfs_sync.h +++ b/fs/xfs/linux-2.6/xfs_sync.h @@ -48,6 +48,7 @@ int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode); int xfs_reclaim_inodes(struct xfs_mount *mp, int mode); void xfs_inode_set_reclaim_tag(struct xfs_inode *ip); +void __xfs_inode_set_reclaim_tag(struct xfs_perag *pag, struct xfs_inode *ip); void xfs_inode_clear_reclaim_tag(struct xfs_inode *ip); void __xfs_inode_clear_reclaim_tag(struct xfs_mount *mp, struct xfs_perag *pag, struct xfs_inode *ip); diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c index 34ec86923f7e..ecbf8b4d2e2e 100644 --- a/fs/xfs/xfs_iget.c +++ b/fs/xfs/xfs_iget.c @@ -191,80 +191,82 @@ xfs_iget_cache_hit( int flags, int lock_flags) __releases(pag->pag_ici_lock) { + struct inode *inode = VFS_I(ip); struct xfs_mount *mp = ip->i_mount; - int error = EAGAIN; + int error; + + spin_lock(&ip->i_flags_lock); /* - * If INEW is set this inode is being set up - * If IRECLAIM is set this inode is being torn down - * Pause and try again. + * If we are racing with another cache hit that is currently + * instantiating this inode or currently recycling it out of + * reclaimabe state, wait for the initialisation to complete + * before continuing. + * + * XXX(hch): eventually we should do something equivalent to + * wait_on_inode to wait for these flags to be cleared + * instead of polling for it. */ - if (xfs_iflags_test(ip, (XFS_INEW|XFS_IRECLAIM))) { + if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) { XFS_STATS_INC(xs_ig_frecycle); + error = EAGAIN; goto out_error; } - /* If IRECLAIMABLE is set, we've torn down the vfs inode part */ - if (xfs_iflags_test(ip, XFS_IRECLAIMABLE)) { - - /* - * If lookup is racing with unlink, then we should return an - * error immediately so we don't remove it from the reclaim - * list and potentially leak the inode. - */ - if ((ip->i_d.di_mode == 0) && !(flags & XFS_IGET_CREATE)) { - error = ENOENT; - goto out_error; - } + /* + * If lookup is racing with unlink return an error immediately. + */ + if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) { + error = ENOENT; + goto out_error; + } + /* + * If IRECLAIMABLE is set, we've torn down the VFS inode already. + * Need to carefully get it back into useable state. + */ + if (ip->i_flags & XFS_IRECLAIMABLE) { xfs_itrace_exit_tag(ip, "xfs_iget.alloc"); /* - * We need to re-initialise the VFS inode as it has been - * 'freed' by the VFS. Do this here so we can deal with - * errors cleanly, then tag it so it can be set up correctly - * later. + * We need to set XFS_INEW atomically with clearing the + * reclaimable tag so that we do have an indicator of the + * inode still being initialized. */ - if (inode_init_always(mp->m_super, VFS_I(ip))) { - error = ENOMEM; + ip->i_flags |= XFS_INEW; + ip->i_flags &= ~XFS_IRECLAIMABLE; + __xfs_inode_clear_reclaim_tag(mp, pag, ip); + + spin_unlock(&ip->i_flags_lock); + read_unlock(&pag->pag_ici_lock); + + error = -inode_init_always(mp->m_super, inode); + if (error) { + /* + * Re-initializing the inode failed, and we are in deep + * trouble. Try to re-add it to the reclaim list. + */ + read_lock(&pag->pag_ici_lock); + spin_lock(&ip->i_flags_lock); + + ip->i_flags &= ~XFS_INEW; + ip->i_flags |= XFS_IRECLAIMABLE; + __xfs_inode_set_reclaim_tag(pag, ip); + goto out_error; + } + inode->i_state = I_LOCK|I_NEW; + } else { + /* If the VFS inode is being torn down, pause and try again. */ + if (!igrab(inode)) { + error = EAGAIN; goto out_error; } - /* - * We must set the XFS_INEW flag before clearing the - * XFS_IRECLAIMABLE flag so that if a racing lookup does - * not find the XFS_IRECLAIMABLE above but has the igrab() - * below succeed we can safely check XFS_INEW to detect - * that this inode is still being initialised. - */ - xfs_iflags_set(ip, XFS_INEW); - xfs_iflags_clear(ip, XFS_IRECLAIMABLE); - - /* clear the radix tree reclaim flag as well. */ - __xfs_inode_clear_reclaim_tag(mp, pag, ip); - } else if (!igrab(VFS_I(ip))) { - /* If the VFS inode is being torn down, pause and try again. */ - XFS_STATS_INC(xs_ig_frecycle); - goto out_error; - } else if (xfs_iflags_test(ip, XFS_INEW)) { - /* - * We are racing with another cache hit that is - * currently recycling this inode out of the XFS_IRECLAIMABLE - * state. Wait for the initialisation to complete before - * continuing. - */ - wait_on_inode(VFS_I(ip)); + /* We've got a live one. */ + spin_unlock(&ip->i_flags_lock); + read_unlock(&pag->pag_ici_lock); } - if (ip->i_d.di_mode == 0 && !(flags & XFS_IGET_CREATE)) { - error = ENOENT; - iput(VFS_I(ip)); - goto out_error; - } - - /* We've got a live one. */ - read_unlock(&pag->pag_ici_lock); - if (lock_flags != 0) xfs_ilock(ip, lock_flags); @@ -274,6 +276,7 @@ xfs_iget_cache_hit( return 0; out_error: + spin_unlock(&ip->i_flags_lock); read_unlock(&pag->pag_ici_lock); return error; } From c7f6fa44115d401e89db730f357629d39f8e4ba6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 28 Jul 2009 23:52:54 +0200 Subject: [PATCH 175/338] x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog): MCE 0 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 0 BANK 1 MCG status: MCi status: Error overflow Uncorrected error Error enabled Processor context corrupt MCA: Data CACHE Level-1 UNKNOWN Error STATUS f200000000000195 MCGSTATUS 0 [ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error) and f200000000000115 (... READ Error). To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump content of STATUS MSR before it is cleared during initialization. ] Since the bogus MCE results in a kernel taint (which in turn disables lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs by default ("mce=bootlog" boot parameter can be be used to get the old behavior). Signed-off-by: Bartlomiej Zolnierkiewicz Reviewed-by: Andi Kleen Signed-off-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 1cfb623ce11c..a0c2910d96a0 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1273,6 +1273,10 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c) if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) && monarch_timeout < 0) monarch_timeout = USEC_PER_SEC; + + /* There are also broken BIOSes on some Pentium M systems. */ + if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0) + mce_bootlog = 0; } if (monarch_timeout < 0) monarch_timeout = 0; From de809347aeef0a68c04576c464414d0e4dce59fc Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Mon, 17 Aug 2009 05:43:01 -0400 Subject: [PATCH 176/338] timers: Drop write permission on /proc/timer_list /proc/timer_list and /proc/slabinfo are not supposed to be written, so there should be no write permissions on it. Signed-off-by: WANG Cong Cc: Pekka Enberg Cc: Vegard Nossum Cc: Eduard - Gabriel Munteanu Cc: linux-mm@kvack.org Cc: Christoph Lameter Cc: David Rientjes Cc: Amerigo Wang Cc: Matt Mackall Cc: Arjan van de Ven LKML-Reference: <20090817094525.6355.88682.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar --- kernel/time/timer_list.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c index a999b92a1277..fddd69d16e03 100644 --- a/kernel/time/timer_list.c +++ b/kernel/time/timer_list.c @@ -286,7 +286,7 @@ static int __init init_timer_list_procfs(void) { struct proc_dir_entry *pe; - pe = proc_create("timer_list", 0644, NULL, &timer_list_fops); + pe = proc_create("timer_list", 0444, NULL, &timer_list_fops); if (!pe) return -ENOMEM; return 0; From e412cd257e0d51e0ecbb89f50953835b5a0681b2 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 17 Aug 2009 10:19:00 +0200 Subject: [PATCH 177/338] x86, mce: Don't initialize MCEs on unknown CPUs An older test-box started hanging at the following point during bootup: [ 0.022996] Mount-cache hash table entries: 512 [ 0.024996] Initializing cgroup subsys debug [ 0.025996] Initializing cgroup subsys cpuacct [ 0.026995] Initializing cgroup subsys devices [ 0.027995] Initializing cgroup subsys freezer [ 0.028995] mce: CPU supports 5 MCE banks I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit machine check code on 32bit"), which utilizes the MCE code on 32-bit systems too. The problem is caused by this detail in my config: # CONFIG_CPU_SUP_INTEL is not set This disables the quirks in mce_cpu_quirks() but still enables MCE support - which then hangs due to the missing quirk workaround needed on this CPU: if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0) mce_banks[0].init = 0; The safe solution is to not initialize MCEs if we dont know on what CPU we are running (or if that CPU's support code got disabled in the config). Also be a bit more defensive on 32-bit systems: dont do a boot-time dump of pending MCEs not just on the specific system that we found a problem with (Pentium-M), but earlier ones as well. Now this problem is probably not common and disabling CPU support is rare - but still being more defensive in something we turned on for a wide range of CPUs is prudent. Cc: Hidetoshi Seto LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index a0c2910d96a0..01213048f62f 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1226,8 +1226,13 @@ static void mce_init(void) } /* Add per CPU specific workarounds here */ -static void mce_cpu_quirks(struct cpuinfo_x86 *c) +static int mce_cpu_quirks(struct cpuinfo_x86 *c) { + if (c->x86_vendor == X86_VENDOR_UNKNOWN) { + pr_info("MCE: unknown CPU type - not enabling MCE support.\n"); + return -EOPNOTSUPP; + } + /* This should be disabled by the BIOS, but isn't always */ if (c->x86_vendor == X86_VENDOR_AMD) { if (c->x86 == 15 && banks > 4) { @@ -1274,14 +1279,19 @@ static void mce_cpu_quirks(struct cpuinfo_x86 *c) monarch_timeout < 0) monarch_timeout = USEC_PER_SEC; - /* There are also broken BIOSes on some Pentium M systems. */ - if (c->x86 == 6 && c->x86_model == 13 && mce_bootlog < 0) + /* + * There are also broken BIOSes on some Pentium M and + * earlier systems: + */ + if (c->x86 == 6 && c->x86_model <= 13 && mce_bootlog < 0) mce_bootlog = 0; } if (monarch_timeout < 0) monarch_timeout = 0; if (mce_bootlog != 0) mce_panic_timeout = 30; + + return 0; } static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c) @@ -1342,11 +1352,10 @@ void __cpuinit mcheck_init(struct cpuinfo_x86 *c) if (!mce_available(c)) return; - if (mce_cap_init() < 0) { + if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) { mce_disabled = 1; return; } - mce_cpu_quirks(c); machine_check_vector = do_machine_check; From 87c62a66edd645a9b1ff1f9b00ab20c5a93d8845 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 14 Jul 2009 22:37:09 +0900 Subject: [PATCH 178/338] MIPS: Fix HPAGE_SIZE redefinition This patch fixes warnings like this: CC fs/proc/meminfo.o In file included from /work/linux/include/linux/mmzone.h:20, from /work/linux/include/linux/gfp.h:4, from /work/linux/include/linux/mm.h:8, from /work/linux/fs/proc/meminfo.c:5: /work/linux/arch/mips/include/asm/page.h:36:1: warning: "HPAGE_SIZE" redefined In file included from /work/linux/fs/proc/meminfo.c:2: /work/linux/include/linux/hugetlb.h:107:1: warning: this is the location of the previous definition Signed-off-by: Atsushi Nemoto Acked-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/page.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index 96a14a426a7c..4320239cf4ef 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -32,10 +32,12 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#ifdef CONFIG_HUGETLB_PAGE #define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3) #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#endif /* CONFIG_HUGETLB_PAGE */ #ifndef __ASSEMBLY__ From 523d2f6982136d332c9b7dd00e9e16da1091f060 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Jul 2009 21:26:43 +0200 Subject: [PATCH 179/338] mac80211: fix todo lock The key todo lock can be taken from different locks that require it to be _bh to avoid lock inversion due to (soft)irqs. This should fix the two problems reported by Bob and Gabor: http://mid.gmane.org/20090619113049.GB18956@hash.localnet http://mid.gmane.org/4A3FA376.8020307@openwrt.org Signed-off-by: Johannes Berg Cc: Bob Copeland Cc: Gabor Juhos Signed-off-by: John W. Linville --- net/mac80211/key.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/net/mac80211/key.c b/net/mac80211/key.c index ce267565e180..659a42d529e3 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -67,6 +67,8 @@ static DECLARE_WORK(todo_work, key_todo); * * @key: key to add to do item for * @flag: todo flag(s) + * + * Must be called with IRQs or softirqs disabled. */ static void add_todo(struct ieee80211_key *key, u32 flag) { @@ -140,9 +142,9 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key) ret = drv_set_key(key->local, SET_KEY, &sdata->vif, sta, &key->conf); if (!ret) { - spin_lock(&todo_lock); + spin_lock_bh(&todo_lock); key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE; - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); } if (ret && ret != -ENOSPC && ret != -EOPNOTSUPP) @@ -164,12 +166,12 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) if (!key || !key->local->ops->set_key) return; - spin_lock(&todo_lock); + spin_lock_bh(&todo_lock); if (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) { - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); return; } - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); sta = get_sta_for_key(key); sdata = key->sdata; @@ -188,9 +190,9 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) wiphy_name(key->local->hw.wiphy), key->conf.keyidx, sta ? sta->addr : bcast_addr, ret); - spin_lock(&todo_lock); + spin_lock_bh(&todo_lock); key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); } static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, @@ -437,14 +439,14 @@ void ieee80211_key_link(struct ieee80211_key *key, __ieee80211_key_replace(sdata, sta, old_key, key); - spin_unlock_irqrestore(&sdata->local->key_lock, flags); - /* free old key later */ add_todo(old_key, KEY_FLAG_TODO_DELETE); add_todo(key, KEY_FLAG_TODO_ADD_DEBUGFS); if (netif_running(sdata->dev)) add_todo(key, KEY_FLAG_TODO_HWACCEL_ADD); + + spin_unlock_irqrestore(&sdata->local->key_lock, flags); } static void __ieee80211_key_free(struct ieee80211_key *key) @@ -547,7 +549,7 @@ static void __ieee80211_key_todo(void) */ synchronize_rcu(); - spin_lock(&todo_lock); + spin_lock_bh(&todo_lock); while (!list_empty(&todo_list)) { key = list_first_entry(&todo_list, struct ieee80211_key, todo); list_del_init(&key->todo); @@ -558,7 +560,7 @@ static void __ieee80211_key_todo(void) KEY_FLAG_TODO_HWACCEL_REMOVE | KEY_FLAG_TODO_DELETE); key->flags &= ~todoflags; - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); work_done = false; @@ -591,9 +593,9 @@ static void __ieee80211_key_todo(void) WARN_ON(!work_done); - spin_lock(&todo_lock); + spin_lock_bh(&todo_lock); } - spin_unlock(&todo_lock); + spin_unlock_bh(&todo_lock); } void ieee80211_key_todo(void) From 518ff04fd84290a7ad9042e8a46d78d29cb443d3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 17 Aug 2009 12:09:26 -0400 Subject: [PATCH 180/338] orinoco: correct key bounds check in orinoco_hw_get_tkip_iv If key is 4 that is an array out of bounds. Reported-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 632fac86a308..b3946272c72e 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -70,7 +70,7 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) int err = 0; u8 tsc_arr[4][IW_ENCODE_SEQ_MAX_SIZE]; - if ((key < 0) || (key > 4)) + if ((key < 0) || (key >= 4)) return -EINVAL; err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, From ada508274b8698a33cb0e5bd037db0f9dc781795 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 3 Aug 2009 18:24:21 +0200 Subject: [PATCH 181/338] ocfs2: Handle quota file corruption more gracefully ocfs2_read_virt_blocks() does BUG when we try to read a block from a file beyond its end. Since this can happen due to filesystem corruption, it is not really an appropriate answer. Make ocfs2_read_quota_block() check the condition and handle it by calling ocfs2_error() and returning EIO. [ Modified to print ip_blkno in the error - Joel ] Reported-by: Tristan Ye Signed-off-by: Jan Kara Signed-off-by: Joel Becker --- fs/ocfs2/quota_global.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c index bf7742d0ee3b..44f2a5e1d042 100644 --- a/fs/ocfs2/quota_global.c +++ b/fs/ocfs2/quota_global.c @@ -23,6 +23,7 @@ #include "sysfile.h" #include "dlmglue.h" #include "uptodate.h" +#include "super.h" #include "quota.h" static struct workqueue_struct *ocfs2_quota_wq = NULL; @@ -114,6 +115,15 @@ int ocfs2_read_quota_block(struct inode *inode, u64 v_block, int rc = 0; struct buffer_head *tmp = *bh; + if (i_size_read(inode) >> inode->i_sb->s_blocksize_bits <= v_block) { + ocfs2_error(inode->i_sb, + "Quota file %llu is probably corrupted! Requested " + "to read block %Lu but file has size only %Lu\n", + (unsigned long long)OCFS2_I(inode)->ip_blkno, + (unsigned long long)v_block, + (unsigned long long)i_size_read(inode)); + return -EIO; + } rc = ocfs2_read_virt_blocks(inode, v_block, 1, &tmp, 0, ocfs2_validate_quota_block); if (rc) From 60e2ec48665b8495360ca4a6004c5cd52beb2bc1 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 12 Aug 2009 14:42:47 +0800 Subject: [PATCH 182/338] ocfs2: release the buffer head in ocfs2_do_truncate. In ocfs2_do_truncate, we forget to release last_eb_bh which will cause memleak. So call brelse in the end. Signed-off-by: Tao Ma Signed-off-by: Joel Becker --- fs/ocfs2/alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index f9a3e8942669..ab513ddaeff2 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -6851,7 +6851,7 @@ static int ocfs2_do_truncate(struct ocfs2_super *osb, } status = 0; bail: - + brelse(last_eb_bh); mlog_exit(status); return status; } From eef3a116be11d35396efb2a8cc7345fd3221e294 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Sun, 16 Aug 2009 21:51:44 -0400 Subject: [PATCH 183/338] notify: unused event private race inotify decides if private data it passed to get added to an event was used by checking list_empty(). But it's possible that the event may have been dequeued and the private event removed so it would look empty. The fix is to use the return code from fsnotify_add_notify_event rather than looking at the list. Signed-off-by: Eric Paris Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_fsnotify.c | 13 +++++++------ fs/notify/inotify/inotify_user.c | 7 +++---- fs/notify/notification.c | 7 +++---- 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index 47cd258fd24d..5dcbafe72d71 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -62,13 +62,14 @@ static int inotify_handle_event(struct fsnotify_group *group, struct fsnotify_ev event_priv->wd = wd; ret = fsnotify_add_notify_event(group, event, fsn_event_priv); - /* EEXIST is not an error */ - if (ret == -EEXIST) - ret = 0; - - /* did event_priv get attached? */ - if (list_empty(&fsn_event_priv->event_list)) + if (ret) { inotify_free_event_priv(fsn_event_priv); + /* EEXIST says we tail matched, EOVERFLOW isn't something + * to report up the stack. */ + if ((ret == -EEXIST) || + (ret == -EOVERFLOW)) + ret = 0; + } /* * If we hold the entry until after the event is on the queue diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index f30d9bbc2e1b..c172a7a17b17 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -386,6 +386,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, struct fsnotify_event *ignored_event; struct inotify_event_private_data *event_priv; struct fsnotify_event_private_data *fsn_event_priv; + int ret; ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0, @@ -404,10 +405,8 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, fsn_event_priv->group = group; event_priv->wd = ientry->wd; - fsnotify_add_notify_event(group, ignored_event, fsn_event_priv); - - /* did the private data get added? */ - if (list_empty(&fsn_event_priv->event_list)) + ret = fsnotify_add_notify_event(group, ignored_event, fsn_event_priv); + if (ret) inotify_free_event_priv(fsn_event_priv); skip_send_ignore: diff --git a/fs/notify/notification.c b/fs/notify/notification.c index 521368574e97..74b3cf30bc6b 100644 --- a/fs/notify/notification.c +++ b/fs/notify/notification.c @@ -171,9 +171,7 @@ int fsnotify_add_notify_event(struct fsnotify_group *group, struct fsnotify_even struct list_head *list = &group->notification_list; struct fsnotify_event_holder *last_holder; struct fsnotify_event *last_event; - - /* easy to tell if priv was attached to the event */ - INIT_LIST_HEAD(&priv->event_list); + int ret = 0; /* * There is one fsnotify_event_holder embedded inside each fsnotify_event. @@ -194,6 +192,7 @@ alloc_holder: if (group->q_len >= group->max_events) { event = &q_overflow_event; + ret = -EOVERFLOW; /* sorry, no private data on the overflow event */ priv = NULL; } @@ -235,7 +234,7 @@ alloc_holder: mutex_unlock(&group->notification_mutex); wake_up(&group->notification_waitq); - return 0; + return ret; } /* From cd94c8bbef8d4b796a7ed4c551355a334604fd36 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Sun, 16 Aug 2009 21:51:49 -0400 Subject: [PATCH 184/338] inotify: tail drop inotify q_overflow events In f44aebcc the tail drop logic of events with no file backing (q_overflow and in_ignored) was reversed so IN_IGNORED events would never be tail dropped. This now means that Q_OVERFLOW events are NOT tail dropped. The fix is to not tail drop IN_IGNORED, but to tail drop Q_OVERFLOW. Signed-off-by: Eric Paris Signed-off-by: Linus Torvalds --- fs/notify/notification.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/notify/notification.c b/fs/notify/notification.c index 74b3cf30bc6b..3816d5750dd5 100644 --- a/fs/notify/notification.c +++ b/fs/notify/notification.c @@ -153,6 +153,10 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new return true; break; case (FSNOTIFY_EVENT_NONE): + if (old->mask & FS_Q_OVERFLOW) + return true; + else if (old->mask & FS_IN_IGNORED) + return false; return false; }; } From 08e53fcb0db34baca3db84a457b6d67faabee4c6 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Sun, 16 Aug 2009 21:51:55 -0400 Subject: [PATCH 185/338] inotify: start watch descriptor count at 1 The inotify_add_watch man page specifies that inotify_add_watch() will return a non-negative integer. However, historically the inotify watches started at 1, not at 0. Turns out that the inotifywait program provided by the inotify-tools package doesn't properly handle a 0 watch descriptor. In 7e790dd5 we changed from starting at 1 to starting at 0. This patch starts at 1, just like in previous kernels, but also just like in previous kernels it's possible for it to wrap back to 0. This preserves the kernel functionality exactly like it was before the patch (neither method broke the spec) Signed-off-by: Eric Paris Signed-off-by: Linus Torvalds --- fs/notify/inotify/inotify_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index c172a7a17b17..dc32ed8323ba 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -567,7 +567,7 @@ static struct fsnotify_group *inotify_new_group(struct user_struct *user, unsign spin_lock_init(&group->inotify_data.idr_lock); idr_init(&group->inotify_data.idr); - group->inotify_data.last_wd = 0; + group->inotify_data.last_wd = 1; group->inotify_data.user = user; group->inotify_data.fa = NULL; From 1adcaafe7414c5731f758b158aa0525057225deb Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 17 Aug 2009 13:23:50 -0700 Subject: [PATCH 186/338] x86, pat: Allow ISA memory range uncacheable mapping requests Max Vozeler reported: > Bug 13877 - bogl-term broken with CONFIG_X86_PAT=y, works with =n > > strace of bogl-term: > 814 mmap2(NULL, 65536, PROT_READ|PROT_WRITE, MAP_SHARED, 4, 0) > = -1 EAGAIN (Resource temporarily unavailable) > 814 write(2, "bogl: mmaping /dev/fb0: Resource temporarily unavailable\n", > 57) = 57 PAT code maps the ISA memory range as WB in the PAT attribute, so that fixed range MTRR registers define the actual memory type (UC/WC/WT etc). But the upper level is_new_memtype_allowed() API checks are failing, as the request here is for UC and the return tracked type is WB (Tracked type is WB as MTRR type for this legacy range potentially will be different for each 4k page). Fix is_new_memtype_allowed() by always succeeding the ISA address range checks, as the null PAT (WB) and def MTRR fixed range register settings satisfy the memory type needs of the applications that map the ISA address range. Reported-and-Tested-by: Max Vozeler Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/pgtable.h | 12 ++++++++++-- arch/x86/mm/pat.c | 3 ++- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 3cc06e3fceb8..16748077559a 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -2,6 +2,7 @@ #define _ASM_X86_PGTABLE_H #include +#include #include @@ -269,9 +270,16 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) #define canon_pgprot(p) __pgprot(massage_pgprot(p)) -static inline int is_new_memtype_allowed(unsigned long flags, - unsigned long new_flags) +static inline int is_new_memtype_allowed(u64 paddr, unsigned long size, + unsigned long flags, + unsigned long new_flags) { + /* + * PAT type is always WB for ISA. So no need to check. + */ + if (is_ISA_range(paddr, paddr + size - 1)) + return 1; + /* * Certain new memtypes are not allowed with certain * requested memtype: diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index e6718bb28065..352aa9e927e2 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -623,7 +623,8 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot, return ret; if (flags != want_flags) { - if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) { + if (strict_prot || + !is_new_memtype_allowed(paddr, size, want_flags, flags)) { free_memtype(paddr, paddr + size); printk(KERN_ERR "%s:%d map pfn expected mapping type %s" " for %Lx-%Lx, got %s\n", From 50fb6d2bd7062708892ae7147f30c3ee905b7a3d Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:57 -0600 Subject: [PATCH 187/338] 9p: Check for error in return value of v9fs_fid_add Check if v9fs_fid_add was successful or not based on its return value. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 81f8bbf12f9f..1fa5f15eaddc 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -470,7 +470,10 @@ v9fs_create(struct v9fs_session_info *v9ses, struct inode *dir, dentry->d_op = &v9fs_dentry_operations; d_instantiate(dentry, inode); - v9fs_fid_add(dentry, fid); + err = v9fs_fid_add(dentry, fid); + if (err < 0) + goto error; + return ofid; error: From 2bb541157fe2602af7b9952096d0524f6f9c1e73 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:56 -0600 Subject: [PATCH 188/338] 9p: Fix possible inode leak in v9fs_get_inode. Add a missing iput when cleaning up if v9fs_get_inode fails after returning a valid inode. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 107 ++++++++++++++++++++++++---------------------- 1 file changed, 57 insertions(+), 50 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 1fa5f15eaddc..0c8af1abf603 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -207,65 +207,72 @@ v9fs_blank_wstat(struct p9_wstat *wstat) struct inode *v9fs_get_inode(struct super_block *sb, int mode) { + int err; struct inode *inode; struct v9fs_session_info *v9ses = sb->s_fs_info; P9_DPRINTK(P9_DEBUG_VFS, "super block: %p mode: %o\n", sb, mode); inode = new_inode(sb); - if (inode) { - inode->i_mode = mode; - inode->i_uid = current_fsuid(); - inode->i_gid = current_fsgid(); - inode->i_blocks = 0; - inode->i_rdev = 0; - inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; - inode->i_mapping->a_ops = &v9fs_addr_operations; - - switch (mode & S_IFMT) { - case S_IFIFO: - case S_IFBLK: - case S_IFCHR: - case S_IFSOCK: - if (!v9fs_extended(v9ses)) { - P9_DPRINTK(P9_DEBUG_ERROR, - "special files without extended mode\n"); - return ERR_PTR(-EINVAL); - } - init_special_inode(inode, inode->i_mode, - inode->i_rdev); - break; - case S_IFREG: - inode->i_op = &v9fs_file_inode_operations; - inode->i_fop = &v9fs_file_operations; - break; - case S_IFLNK: - if (!v9fs_extended(v9ses)) { - P9_DPRINTK(P9_DEBUG_ERROR, - "extended modes used w/o 9P2000.u\n"); - return ERR_PTR(-EINVAL); - } - inode->i_op = &v9fs_symlink_inode_operations; - break; - case S_IFDIR: - inc_nlink(inode); - if (v9fs_extended(v9ses)) - inode->i_op = &v9fs_dir_inode_operations_ext; - else - inode->i_op = &v9fs_dir_inode_operations; - inode->i_fop = &v9fs_dir_operations; - break; - default: - P9_DPRINTK(P9_DEBUG_ERROR, - "BAD mode 0x%x S_IFMT 0x%x\n", - mode, mode & S_IFMT); - return ERR_PTR(-EINVAL); - } - } else { + if (!inode) { P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n"); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } + + inode->i_mode = mode; + inode->i_uid = current_fsuid(); + inode->i_gid = current_fsgid(); + inode->i_blocks = 0; + inode->i_rdev = 0; + inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; + inode->i_mapping->a_ops = &v9fs_addr_operations; + + switch (mode & S_IFMT) { + case S_IFIFO: + case S_IFBLK: + case S_IFCHR: + case S_IFSOCK: + if (!v9fs_extended(v9ses)) { + P9_DPRINTK(P9_DEBUG_ERROR, + "special files without extended mode\n"); + err = -EINVAL; + goto error; + } + init_special_inode(inode, inode->i_mode, inode->i_rdev); + break; + case S_IFREG: + inode->i_op = &v9fs_file_inode_operations; + inode->i_fop = &v9fs_file_operations; + break; + case S_IFLNK: + if (!v9fs_extended(v9ses)) { + P9_DPRINTK(P9_DEBUG_ERROR, + "extended modes used w/o 9P2000.u\n"); + err = -EINVAL; + goto error; + } + inode->i_op = &v9fs_symlink_inode_operations; + break; + case S_IFDIR: + inc_nlink(inode); + if (v9fs_extended(v9ses)) + inode->i_op = &v9fs_dir_inode_operations_ext; + else + inode->i_op = &v9fs_dir_inode_operations; + inode->i_fop = &v9fs_dir_operations; + break; + default: + P9_DPRINTK(P9_DEBUG_ERROR, "BAD mode 0x%x S_IFMT 0x%x\n", + mode, mode & S_IFMT); + err = -EINVAL; + goto error; + } + return inode; + +error: + iput(inode); + return ERR_PTR(err); } /* From 0e15597ebfe00e28857185f46aba00f400480ffe Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:55 -0600 Subject: [PATCH 189/338] 9p: minor comment fixes Fix the comments -- mostly the improper and/or missing descriptions of function parameters. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 3 +-- net/9p/client.c | 14 +++++++------- net/9p/trans_fd.c | 8 ++++---- net/9p/trans_rdma.c | 9 +++++---- net/9p/trans_virtio.c | 11 ++++------- 5 files changed, 21 insertions(+), 24 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 0c8af1abf603..f22668afd0d6 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -171,7 +171,6 @@ int v9fs_uflags2omode(int uflags, int extended) /** * v9fs_blank_wstat - helper function to setup a 9P stat structure - * @v9ses: 9P session info (for determining extended mode) * @wstat: structure to initialize * */ @@ -410,9 +409,9 @@ v9fs_open_created(struct inode *inode, struct file *file) * @v9ses: session information * @dir: directory that dentry is being created in * @dentry: dentry that is being created + * @extension: 9p2000.u extension string to support devices, etc. * @perm: create permissions * @mode: open mode - * @extension: 9p2000.u extension string to support devices, etc. * */ static struct p9_fid * diff --git a/net/9p/client.c b/net/9p/client.c index 787ccddb85ea..7bbd2d5ae8d3 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -60,9 +60,9 @@ static struct p9_req_t * p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...); /** - * v9fs_parse_options - parse mount options into session structure - * @options: options string passed from mount - * @v9ses: existing v9fs session information + * parse_options - parse mount options into client structure + * @opts: options string passed from mount + * @clnt: existing v9fs client information * * Return 0 upon success, -ERRNO upon failure */ @@ -232,7 +232,7 @@ EXPORT_SYMBOL(p9_tag_lookup); /** * p9_tag_init - setup tags structure and contents - * @tags: tags structure from the client struct + * @c: v9fs client struct * * This initializes the tags structure for each client instance. * @@ -258,7 +258,7 @@ error: /** * p9_tag_cleanup - cleans up tags structure and reclaims resources - * @tags: tags structure from the client struct + * @c: v9fs client struct * * This frees resources associated with the tags structure * @@ -430,8 +430,8 @@ static int p9_check_errors(struct p9_client *c, struct p9_req_t *req) /** * p9_client_flush - flush (cancel) a request - * c: client state - * req: request to cancel + * @c: client state + * @oldreq: request to cancel * * This sents a flush for a particular requests and links * the flush request to the original request. The current diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index 8c2588e4edc0..8d934dd7fd54 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -119,8 +119,8 @@ struct p9_poll_wait { * @wpos: write position for current frame * @wsize: amount of data to write for current frame * @wbuf: current write buffer + * @poll_pending_link: pending links to be polled per conn * @poll_wait: array of wait_q's for various worker threads - * @poll_waddr: ???? * @pt: poll state * @rq: current read work * @wq: current write work @@ -700,9 +700,9 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req) } /** - * parse_options - parse mount options into session structure - * @options: options string passed from mount - * @opts: transport-specific structure to parse options into + * parse_opts - parse mount options into p9_fd_opts structure + * @params: options string passed from mount + * @opts: fd transport-specific structure to parse options into * * Returns 0 upon success, -ERRNO upon failure */ diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index ac4990041ebb..65cb29db03f8 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -67,14 +67,15 @@ * @pd: Protection Domain pointer * @qp: Queue Pair pointer * @cq: Completion Queue pointer + * @dm_mr: DMA Memory Region pointer * @lkey: The local access only memory region key * @timeout: Number of uSecs to wait for connection management events * @sq_depth: The depth of the Send Queue * @sq_sem: Semaphore for the SQ * @rq_depth: The depth of the Receive Queue. + * @rq_count: Count of requests in the Receive Queue. * @addr: The remote peer's address * @req_lock: Protects the active request list - * @send_wait: Wait list when the SQ fills up * @cm_done: Completion event for connection management tracking */ struct p9_trans_rdma { @@ -154,9 +155,9 @@ static match_table_t tokens = { }; /** - * parse_options - parse mount options into session structure - * @options: options string passed from mount - * @opts: transport-specific structure to parse options into + * parse_opts - parse mount options into rdma options structure + * @params: options string passed from mount + * @opts: rdma transport-specific structure to parse options into * * Returns 0 upon success, -ERRNO upon failure */ diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index a49484e67e1d..9bf0b737aa51 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -57,11 +57,9 @@ static int chan_index; * @initialized: whether the channel is initialized * @inuse: whether the channel is in use * @lock: protects multiple elements within this structure + * @client: client instance * @vdev: virtio dev associated with this channel * @vq: virtio queue associated with this channel - * @tagpool: accounting for tag ids (and request slots) - * @reqs: array of request slots - * @max_tag: current number of request_slots allocated * @sg: scatter gather list which is used to pack a request (protected?) * * We keep all per-channel information in a structure. @@ -92,7 +90,7 @@ static unsigned int rest_of_page(void *data) /** * p9_virtio_close - reclaim resources of a channel - * @trans: transport state + * @client: client instance * * This reclaims a channel by freeing its resources and * reseting its inuse flag. @@ -181,9 +179,8 @@ static int p9_virtio_cancel(struct p9_client *client, struct p9_req_t *req) /** * p9_virtio_request - issue a request - * @t: transport state - * @tc: &p9_fcall request to transmit - * @rc: &p9_fcall to put reponse into + * @client: client instance issuing the request + * @req: request to be issued * */ From 02bc35672b2fdf251e264adca5407792f63191e4 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:54 -0600 Subject: [PATCH 190/338] 9p: Fix possible memleak in v9fs_inode_from fid. Add missing p9stat_free in v9fs_inode_from_fid to avoid any possible leaks. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index f22668afd0d6..fac30d21851f 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -344,30 +344,25 @@ v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid, ret = NULL; st = p9_client_stat(fid); - if (IS_ERR(st)) { - err = PTR_ERR(st); - st = NULL; - goto error; - } + if (IS_ERR(st)) + return ERR_CAST(st); umode = p9mode2unixmode(v9ses, st->mode); ret = v9fs_get_inode(sb, umode); if (IS_ERR(ret)) { err = PTR_ERR(ret); - ret = NULL; goto error; } v9fs_stat2inode(st, ret, sb); ret->i_ino = v9fs_qid2ino(&st->qid); + p9stat_free(st); kfree(st); return ret; error: + p9stat_free(st); kfree(st); - if (ret) - iput(ret); - return ERR_PTR(err); } From 4f4038328da5eb9cc237b51d3fe68138fd3fea14 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:53 -0600 Subject: [PATCH 191/338] 9p: Fix v9fs show_options Add the delimiter ',' before the options when they are passed and check if no option parameters are passed to prevent displaying NULL in /proc/mounts. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 38d695d66a0b..a9d7d08cfbe8 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -220,8 +220,8 @@ static void v9fs_kill_super(struct super_block *s) static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt) { struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info; - - seq_printf(m, "%s", v9ses->options); + if (v9ses->options != NULL) + seq_printf(m, ",%s", v9ses->options); return 0; } From 1b5ab3e86712b6be38ebbe0d821387c1d8f91d7c Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:52 -0600 Subject: [PATCH 192/338] 9p: Fix possible regressions when ->get_sb fails. ->get_sb can fail causing some badness. this patch fixes * clear sb->fs_s_info in kill_sb. * deactivate_locked_super() calls kill_sb (v9fs_kill_super) which closes the destroys the client, clunks all its fids and closes the v9fs session. Attempting to do it twice will cause an oops. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_super.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index a9d7d08cfbe8..2495af4ad9a6 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -120,7 +120,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags, P9_DPRINTK(P9_DEBUG_VFS, " \n"); - st = NULL; v9ses = kzalloc(sizeof(struct v9fs_session_info), GFP_KERNEL); if (!v9ses) return -ENOMEM; @@ -173,10 +172,8 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n"); simple_set_mnt(mnt, sb); return 0; -release_sb: - deactivate_locked_super(sb); - free_stat: + p9stat_free(st); kfree(st); clunk_fid: @@ -185,7 +182,12 @@ clunk_fid: close_session: v9fs_session_close(v9ses); kfree(v9ses); + return retval; +release_sb: + p9stat_free(st); + kfree(st); + deactivate_locked_super(sb); return retval; } @@ -207,6 +209,7 @@ static void v9fs_kill_super(struct super_block *s) v9fs_session_close(v9ses); kfree(v9ses); + s->s_fs_info = NULL; P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n"); } From 4d3297ca5bf37ff5956f76fb352e009880aad62d Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Sun, 19 Jul 2009 13:41:51 -0600 Subject: [PATCH 193/338] 9p: Remove redundant inode uid/gid assignment Remove a redundant update of inode's i_uid and i_gid after v9fs_get_inode() since the latter already sets up a new inode and sets the proper uid and gid values. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_super.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 2495af4ad9a6..072dce094477 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -113,8 +113,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags, struct v9fs_session_info *v9ses = NULL; struct p9_wstat *st = NULL; int mode = S_IRWXUGO | S_ISVTX; - uid_t uid = current_fsuid(); - gid_t gid = current_fsgid(); struct p9_fid *fid; int retval = 0; @@ -149,9 +147,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags, goto release_sb; } - inode->i_uid = uid; - inode->i_gid = gid; - root = d_alloc_root(inode); if (!root) { iput(inode); From 5fd131893793567c361ae64cbeb28a2a753bbe35 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 30 Jul 2009 17:01:53 +0200 Subject: [PATCH 194/338] ocfs2: Don't oops in ocfs2_kill_sb on a failed mount If we fail to mount the filesystem, we have to be careful not to dereference uninitialized structures in ocfs2_kill_sb. Signed-off-by: Jan Kara Signed-off-by: Joel Becker --- fs/ocfs2/super.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index b0ee0fdf799a..a3f8871d21fd 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1218,13 +1218,17 @@ static void ocfs2_kill_sb(struct super_block *sb) { struct ocfs2_super *osb = OCFS2_SB(sb); + /* Failed mount? */ + if (!osb || atomic_read(&osb->vol_state) == VOLUME_DISABLED) + goto out; + /* Prevent further queueing of inode drop events */ spin_lock(&dentry_list_lock); ocfs2_set_osb_flag(osb, OCFS2_OSB_DROP_DENTRY_LOCK_IMMED); spin_unlock(&dentry_list_lock); /* Wait for work to finish and/or remove it */ cancel_work_sync(&osb->dentry_lock_work); - +out: kill_block_super(sb); } From 48559b4c30708ebdc849483da9fb83ee08c6c908 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Mon, 17 Aug 2009 16:32:18 -0500 Subject: [PATCH 195/338] 9p: Add missing cast for the error return value in v9fs_get_inode Cast the error return value (ENOMEM) in v9fs_get_inode() to its correct type using ERR_PTR. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index fac30d21851f..06a223d50a81 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -215,7 +215,7 @@ struct inode *v9fs_get_inode(struct super_block *sb, int mode) inode = new_inode(sb); if (!inode) { P9_EPRINTK(KERN_WARNING, "Problem allocating inode\n"); - return -ENOMEM; + return ERR_PTR(-ENOMEM); } inode->i_mode = mode; From 0aad37ef3deed118d3816e1d1a600eb2ec9dcb87 Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Mon, 17 Aug 2009 16:38:45 -0500 Subject: [PATCH 196/338] net/9p: insulate the client against an invalid error code sent by a 9p server A looney tunes server sending an invalid error code (which is !IS_ERR_VALUE) can result in a client oops. So fix it by adding a check and converting unknown or invalid error codes to -ESERVERFAULT. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- net/9p/client.c | 7 +------ net/9p/error.c | 2 +- 2 files changed, 2 insertions(+), 7 deletions(-) diff --git a/net/9p/client.c b/net/9p/client.c index 7bbd2d5ae8d3..5bf5f227dbe0 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -411,14 +411,9 @@ static int p9_check_errors(struct p9_client *c, struct p9_req_t *req) if (c->dotu) err = -ecode; - if (!err) { + if (!err || !IS_ERR_VALUE(err)) err = p9_errstr2errno(ename, strlen(ename)); - /* string match failed */ - if (!err) - err = -ESERVERFAULT; - } - P9_DPRINTK(P9_DEBUG_9P, "<<< RERROR (%d) %s\n", -ecode, ename); kfree(ename); diff --git a/net/9p/error.c b/net/9p/error.c index fdebe4314062..52518512a93e 100644 --- a/net/9p/error.c +++ b/net/9p/error.c @@ -239,7 +239,7 @@ int p9_errstr2errno(char *errstr, int len) errstr[len] = 0; printk(KERN_ERR "%s: server reported unknown error %s\n", __func__, errstr); - errno = 1; + errno = ESERVERFAULT; } return -errno; From 4b53e4b500779230aedd5355940aeaaed0b5353b Mon Sep 17 00:00:00 2001 From: Abhishek Kulkarni Date: Mon, 17 Aug 2009 16:42:28 -0500 Subject: [PATCH 197/338] 9p: remove unnecessary v9fses->options which duplicates the mount string The mount options string is saved in sb->s_options. This patch removes the redundant duplicating of the mount options. Also, since we are not displaying anything special in show options, we replace v9fs_show_options with generic_show_options for now. Signed-off-by: Abhishek Kulkarni Signed-off-by: Eric Van Hensbergen --- fs/9p/v9fs.c | 21 +++++---------------- fs/9p/v9fs.h | 1 - fs/9p/vfs_super.c | 23 +++++------------------ 3 files changed, 10 insertions(+), 35 deletions(-) diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c index 332b5ff02fec..f7003cfac63d 100644 --- a/fs/9p/v9fs.c +++ b/fs/9p/v9fs.c @@ -76,7 +76,7 @@ static const match_table_t tokens = { * Return 0 upon success, -ERRNO upon failure. */ -static int v9fs_parse_options(struct v9fs_session_info *v9ses) +static int v9fs_parse_options(struct v9fs_session_info *v9ses, char *opts) { char *options; substring_t args[MAX_OPT_ARGS]; @@ -90,10 +90,10 @@ static int v9fs_parse_options(struct v9fs_session_info *v9ses) v9ses->debug = 0; v9ses->cache = 0; - if (!v9ses->options) + if (!opts) return 0; - options = kstrdup(v9ses->options, GFP_KERNEL); + options = kstrdup(opts, GFP_KERNEL); if (!options) { P9_DPRINTK(P9_DEBUG_ERROR, "failed to allocate copy of option string\n"); @@ -206,24 +206,14 @@ struct p9_fid *v9fs_session_init(struct v9fs_session_info *v9ses, v9ses->uid = ~0; v9ses->dfltuid = V9FS_DEFUID; v9ses->dfltgid = V9FS_DEFGID; - if (data) { - v9ses->options = kstrdup(data, GFP_KERNEL); - if (!v9ses->options) { - P9_DPRINTK(P9_DEBUG_ERROR, - "failed to allocate copy of option string\n"); - retval = -ENOMEM; - goto error; - } - } - rc = v9fs_parse_options(v9ses); + rc = v9fs_parse_options(v9ses, data); if (rc < 0) { retval = rc; goto error; } - v9ses->clnt = p9_client_create(dev_name, v9ses->options); - + v9ses->clnt = p9_client_create(dev_name, data); if (IS_ERR(v9ses->clnt)) { retval = PTR_ERR(v9ses->clnt); v9ses->clnt = NULL; @@ -280,7 +270,6 @@ void v9fs_session_close(struct v9fs_session_info *v9ses) __putname(v9ses->uname); __putname(v9ses->aname); - kfree(v9ses->options); } /** diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h index a7d567192998..38762bf102a9 100644 --- a/fs/9p/v9fs.h +++ b/fs/9p/v9fs.h @@ -85,7 +85,6 @@ struct v9fs_session_info { unsigned int afid; unsigned int cache; - char *options; /* copy of mount options */ char *uname; /* user name to mount as */ char *aname; /* name of remote hierarchy being mounted */ unsigned int maxdata; /* max data for client interface */ diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 072dce094477..8961f1a8f668 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -81,7 +81,7 @@ static int v9fs_set_super(struct super_block *s, void *data) static void v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses, - int flags) + int flags, void *data) { sb->s_maxbytes = MAX_LFS_FILESIZE; sb->s_blocksize_bits = fls(v9ses->maxdata - 1); @@ -91,6 +91,8 @@ v9fs_fill_super(struct super_block *sb, struct v9fs_session_info *v9ses, sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC | MS_NOATIME; + + save_mount_options(sb, data); } /** @@ -139,7 +141,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags, retval = PTR_ERR(sb); goto free_stat; } - v9fs_fill_super(sb, v9ses, flags); + v9fs_fill_super(sb, v9ses, flags, data); inode = v9fs_get_inode(sb, S_IFDIR | mode); if (IS_ERR(inode)) { @@ -208,21 +210,6 @@ static void v9fs_kill_super(struct super_block *s) P9_DPRINTK(P9_DEBUG_VFS, "exiting kill_super\n"); } -/** - * v9fs_show_options - Show mount options in /proc/mounts - * @m: seq_file to write to - * @mnt: mount descriptor - * - */ - -static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt) -{ - struct v9fs_session_info *v9ses = mnt->mnt_sb->s_fs_info; - if (v9ses->options != NULL) - seq_printf(m, ",%s", v9ses->options); - return 0; -} - static void v9fs_umount_begin(struct super_block *sb) { @@ -235,7 +222,7 @@ v9fs_umount_begin(struct super_block *sb) static const struct super_operations v9fs_super_ops = { .statfs = simple_statfs, .clear_inode = v9fs_clear_inode, - .show_options = v9fs_show_options, + .show_options = generic_show_options, .umount_begin = v9fs_umount_begin, }; From 7815f4be4026b6c5027058102ae67a4b9feffa5f Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 17 Aug 2009 16:49:44 -0500 Subject: [PATCH 198/338] 9p: update documentation pointers Signed-off-by: Eric Van Hensbergen --- Documentation/filesystems/9p.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt index bf8080640eba..6208f55c44c3 100644 --- a/Documentation/filesystems/9p.txt +++ b/Documentation/filesystems/9p.txt @@ -123,6 +123,9 @@ available from the same CVS repository. There are user and developer mailing lists available through the v9fs project on sourceforge (http://sourceforge.net/projects/v9fs). +A stand-alone version of the module (which should build for any 2.6 kernel) +is available via (http://github.com/ericvh/9p-sac/tree/master) + News and other information is maintained on SWiK (http://swik.net/v9fs). Bug reports may be issued through the kernel.org bugzilla From f2d84b65b9778e8a35dd904f7d3993f0a60c9756 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 7 Aug 2009 18:55:48 +0800 Subject: [PATCH 199/338] ftrace: Unify effect of writing to trace_options and option/* "echo noglobal-clock > trace_options" can be used to change trace clock but "echo 0 > options/global-clock" can't. The flag toggling will be silently accepted without actually changing the clock callback. We can fix it by using set_tracer_flags() in trace_options_core_write(). Changelog: v1->v2: Simplified switch() after Li Zefan 's suggestion Signed-off-by: Zhao Lei Cc: Steven Rostedt Cc: Li Zefan Signed-off-by: Frederic Weisbecker --- kernel/trace/trace.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c22b40f8f576..8c358395d338 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3896,17 +3896,9 @@ trace_options_core_write(struct file *filp, const char __user *ubuf, size_t cnt, if (ret < 0) return ret; - switch (val) { - case 0: - trace_flags &= ~(1 << index); - break; - case 1: - trace_flags |= 1 << index; - break; - - default: + if (val != 0 && val != 1) return -EINVAL; - } + set_tracer_flags(1 << index, val); *ppos += cnt; From 80ffb3cceaefa405f2ecd46d66500ed8d53efe74 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 18 Aug 2009 10:35:26 +1000 Subject: [PATCH 200/338] Fix new incorrect error return from do_md_stop. Recent commit c8c00a6915a2e3d10416e8bdd3138429beb96210 changed the exit paths in do_md_stop and was not quite careful enough. There is one path were 'err' now needs to be cleared but it isn't. So setting an array to readonly (with mdadm --readonly) will work, but will incorrectly report and error: ENXIO. Signed-off-by: NeilBrown --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index 103f2d33fa89..9dd872000cec 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -4364,6 +4364,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open) if (mode == 1) set_disk_ro(disk, 1); clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + err = 0; } out: mutex_unlock(&mddev->open_mutex); From c6ba973b8fa97422aab4204f7d79f1d413cde925 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Aug 2009 18:05:32 -0700 Subject: [PATCH 201/338] NETROM: Fix use of static buffer The static variable used by nr_call_to_digi might result in corruption if multiple threads are trying to usee a node or neighbour via ioctl. Fixed by having the caller pass a structure in. This is safe because nr_add_node rsp. nr_add_neigh will allocate a permanent structure, if needed. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- net/netrom/nr_route.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c index e943c16552a2..4eb1ac9a7679 100644 --- a/net/netrom/nr_route.c +++ b/net/netrom/nr_route.c @@ -630,23 +630,23 @@ out: return dev; } -static ax25_digi *nr_call_to_digi(int ndigis, ax25_address *digipeaters) +static ax25_digi *nr_call_to_digi(ax25_digi *digi, int ndigis, + ax25_address *digipeaters) { - static ax25_digi ax25_digi; int i; if (ndigis == 0) return NULL; for (i = 0; i < ndigis; i++) { - ax25_digi.calls[i] = digipeaters[i]; - ax25_digi.repeated[i] = 0; + digi->calls[i] = digipeaters[i]; + digi->repeated[i] = 0; } - ax25_digi.ndigi = ndigis; - ax25_digi.lastrepeat = -1; + digi->ndigi = ndigis; + digi->lastrepeat = -1; - return &ax25_digi; + return digi; } /* @@ -656,6 +656,7 @@ int nr_rt_ioctl(unsigned int cmd, void __user *arg) { struct nr_route_struct nr_route; struct net_device *dev; + ax25_digi digi; int ret; switch (cmd) { @@ -673,13 +674,15 @@ int nr_rt_ioctl(unsigned int cmd, void __user *arg) ret = nr_add_node(&nr_route.callsign, nr_route.mnemonic, &nr_route.neighbour, - nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters), + nr_call_to_digi(&digi, nr_route.ndigis, + nr_route.digipeaters), dev, nr_route.quality, nr_route.obs_count); break; case NETROM_NEIGH: ret = nr_add_neigh(&nr_route.callsign, - nr_call_to_digi(nr_route.ndigis, nr_route.digipeaters), + nr_call_to_digi(&digi, nr_route.ndigis, + nr_route.digipeaters), dev, nr_route.quality); break; default: From c1a8f1f1c8e01eab5862c8db39b49ace814e6c66 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 16 Aug 2009 09:36:49 +0000 Subject: [PATCH 202/338] net: restore gnet_stats_basic to previous definition In 5e140dfc1fe87eae27846f193086724806b33c7d "net: reorder struct Qdisc for better SMP performance" the definition of struct gnet_stats_basic changed incompatibly, as copies of this struct are shipped to userland via netlink. Restoring old behavior is not welcome, for performance reason. Fix is to use a private structure for kernel, and teach gnet_stats_copy_basic() to convert from kernel to user land, using legacy structure (struct gnet_stats_basic) Based on a report and initial patch from Michael Spang. Reported-by: Michael Spang Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/gen_stats.h | 5 +++++ include/net/act_api.h | 2 +- include/net/gen_stats.h | 10 +++++----- include/net/netfilter/xt_rateest.h | 2 +- include/net/sch_generic.h | 2 +- net/core/gen_estimator.c | 12 ++++++------ net/core/gen_stats.c | 11 ++++++++--- net/netfilter/xt_RATEEST.c | 2 +- net/sched/sch_atm.c | 2 +- net/sched/sch_cbq.c | 2 +- net/sched/sch_drr.c | 2 +- net/sched/sch_hfsc.c | 2 +- net/sched/sch_htb.c | 2 +- 13 files changed, 33 insertions(+), 23 deletions(-) diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h index 0ffa41df0ee8..710e901085d0 100644 --- a/include/linux/gen_stats.h +++ b/include/linux/gen_stats.h @@ -19,6 +19,11 @@ enum { * @packets: number of seen packets */ struct gnet_stats_basic +{ + __u64 bytes; + __u32 packets; +}; +struct gnet_stats_basic_packed { __u64 bytes; __u32 packets; diff --git a/include/net/act_api.h b/include/net/act_api.h index 565eed8fe496..c05fd717c588 100644 --- a/include/net/act_api.h +++ b/include/net/act_api.h @@ -16,7 +16,7 @@ struct tcf_common { u32 tcfc_capab; int tcfc_action; struct tcf_t tcfc_tm; - struct gnet_stats_basic tcfc_bstats; + struct gnet_stats_basic_packed tcfc_bstats; struct gnet_stats_queue tcfc_qstats; struct gnet_stats_rate_est tcfc_rate_est; spinlock_t tcfc_lock; diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h index d136b5240ef2..c1488553e349 100644 --- a/include/net/gen_stats.h +++ b/include/net/gen_stats.h @@ -28,7 +28,7 @@ extern int gnet_stats_start_copy_compat(struct sk_buff *skb, int type, spinlock_t *lock, struct gnet_dump *d); extern int gnet_stats_copy_basic(struct gnet_dump *d, - struct gnet_stats_basic *b); + struct gnet_stats_basic_packed *b); extern int gnet_stats_copy_rate_est(struct gnet_dump *d, struct gnet_stats_rate_est *r); extern int gnet_stats_copy_queue(struct gnet_dump *d, @@ -37,14 +37,14 @@ extern int gnet_stats_copy_app(struct gnet_dump *d, void *st, int len); extern int gnet_stats_finish_copy(struct gnet_dump *d); -extern int gen_new_estimator(struct gnet_stats_basic *bstats, +extern int gen_new_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est, spinlock_t *stats_lock, struct nlattr *opt); -extern void gen_kill_estimator(struct gnet_stats_basic *bstats, +extern void gen_kill_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est); -extern int gen_replace_estimator(struct gnet_stats_basic *bstats, +extern int gen_replace_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est, spinlock_t *stats_lock, struct nlattr *opt); -extern bool gen_estimator_active(const struct gnet_stats_basic *bstats, +extern bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats, const struct gnet_stats_rate_est *rate_est); #endif diff --git a/include/net/netfilter/xt_rateest.h b/include/net/netfilter/xt_rateest.h index 65d594dffbff..ddbf37e19616 100644 --- a/include/net/netfilter/xt_rateest.h +++ b/include/net/netfilter/xt_rateest.h @@ -8,7 +8,7 @@ struct xt_rateest { spinlock_t lock; struct gnet_estimator params; struct gnet_stats_rate_est rstats; - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; }; extern struct xt_rateest *xt_rateest_lookup(const char *name); diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index 964ffa0d8815..5482e9582f55 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -72,7 +72,7 @@ struct Qdisc */ unsigned long state; struct sk_buff_head q; - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; }; diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c index 78e5bfc454ae..493775f4f2f1 100644 --- a/net/core/gen_estimator.c +++ b/net/core/gen_estimator.c @@ -81,7 +81,7 @@ struct gen_estimator { struct list_head list; - struct gnet_stats_basic *bstats; + struct gnet_stats_basic_packed *bstats; struct gnet_stats_rate_est *rate_est; spinlock_t *stats_lock; int ewma_log; @@ -165,7 +165,7 @@ static void gen_add_node(struct gen_estimator *est) } static -struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats, +struct gen_estimator *gen_find_node(const struct gnet_stats_basic_packed *bstats, const struct gnet_stats_rate_est *rate_est) { struct rb_node *p = est_root.rb_node; @@ -202,7 +202,7 @@ struct gen_estimator *gen_find_node(const struct gnet_stats_basic *bstats, * * NOTE: Called under rtnl_mutex */ -int gen_new_estimator(struct gnet_stats_basic *bstats, +int gen_new_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est, spinlock_t *stats_lock, struct nlattr *opt) @@ -262,7 +262,7 @@ static void __gen_kill_estimator(struct rcu_head *head) * * NOTE: Called under rtnl_mutex */ -void gen_kill_estimator(struct gnet_stats_basic *bstats, +void gen_kill_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est) { struct gen_estimator *e; @@ -292,7 +292,7 @@ EXPORT_SYMBOL(gen_kill_estimator); * * Returns 0 on success or a negative error code. */ -int gen_replace_estimator(struct gnet_stats_basic *bstats, +int gen_replace_estimator(struct gnet_stats_basic_packed *bstats, struct gnet_stats_rate_est *rate_est, spinlock_t *stats_lock, struct nlattr *opt) { @@ -308,7 +308,7 @@ EXPORT_SYMBOL(gen_replace_estimator); * * Returns true if estimator is active, and false if not. */ -bool gen_estimator_active(const struct gnet_stats_basic *bstats, +bool gen_estimator_active(const struct gnet_stats_basic_packed *bstats, const struct gnet_stats_rate_est *rate_est) { ASSERT_RTNL(); diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c index c3d0ffeac243..8569310268ab 100644 --- a/net/core/gen_stats.c +++ b/net/core/gen_stats.c @@ -106,16 +106,21 @@ gnet_stats_start_copy(struct sk_buff *skb, int type, spinlock_t *lock, * if the room in the socket buffer was not sufficient. */ int -gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic *b) +gnet_stats_copy_basic(struct gnet_dump *d, struct gnet_stats_basic_packed *b) { if (d->compat_tc_stats) { d->tc_stats.bytes = b->bytes; d->tc_stats.packets = b->packets; } - if (d->tail) - return gnet_stats_copy(d, TCA_STATS_BASIC, b, sizeof(*b)); + if (d->tail) { + struct gnet_stats_basic sb; + memset(&sb, 0, sizeof(sb)); + sb.bytes = b->bytes; + sb.packets = b->packets; + return gnet_stats_copy(d, TCA_STATS_BASIC, &sb, sizeof(sb)); + } return 0; } diff --git a/net/netfilter/xt_RATEEST.c b/net/netfilter/xt_RATEEST.c index 43f5676b1af4..d80b8192e0d4 100644 --- a/net/netfilter/xt_RATEEST.c +++ b/net/netfilter/xt_RATEEST.c @@ -74,7 +74,7 @@ static unsigned int xt_rateest_tg(struct sk_buff *skb, const struct xt_target_param *par) { const struct xt_rateest_target_info *info = par->targinfo; - struct gnet_stats_basic *stats = &info->est->bstats; + struct gnet_stats_basic_packed *stats = &info->est->bstats; spin_lock_bh(&info->est->lock); stats->bytes += skb->len; diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 2a8b83af7c47..ab82f145f689 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -49,7 +49,7 @@ struct atm_flow_data { struct socket *sock; /* for closing */ u32 classid; /* x:y type ID */ int ref; /* reference count */ - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; struct atm_flow_data *next; struct atm_flow_data *excess; /* flow for excess traffic; diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 23a167670fd5..d5798e17a832 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -128,7 +128,7 @@ struct cbq_class long avgidle; long deficit; /* Saved deficit for WRR */ psched_time_t penalized; - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; struct gnet_stats_rate_est rate_est; struct tc_cbq_xstats xstats; diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c index 7597fe146866..12b2fb04b29b 100644 --- a/net/sched/sch_drr.c +++ b/net/sched/sch_drr.c @@ -22,7 +22,7 @@ struct drr_class { unsigned int refcnt; unsigned int filter_cnt; - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; struct gnet_stats_rate_est rate_est; struct list_head alist; diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 362c2811b2df..dad0144423da 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -116,7 +116,7 @@ struct hfsc_class struct Qdisc_class_common cl_common; unsigned int refcnt; /* usage count */ - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; struct gnet_stats_rate_est rate_est; unsigned int level; /* class level in hierarchy */ diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 88cd02626621..ec4d46399d59 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -74,7 +74,7 @@ enum htb_cmode { struct htb_class { struct Qdisc_class_common common; /* general class parameters */ - struct gnet_stats_basic bstats; + struct gnet_stats_basic_packed bstats; struct gnet_stats_queue qstats; struct gnet_stats_rate_est rate_est; struct tc_htb_xstats xstats; /* our special stats */ From 1154ecbd2f8298ef75609f5f8ed5aca96be599fb Mon Sep 17 00:00:00 2001 From: Zhang Qiang Date: Tue, 18 Aug 2009 14:58:24 +0800 Subject: [PATCH 203/338] nilfs2: missing a read lock for segment writer in nilfs_attach_checkpoint() 'ns_cno' of structure 'the_nilfs' must be protected from segment writer, in other words, the caller of nilfs_get_checkpoint should hold read lock for nilfs->ns_segctor_sem. This patch adds the lock/unlock operations in nilfs_attach_checkpoint() when calling nilfs_cpfile_get_checkpoint(). Signed-off-by: Zhang Qiang Signed-off-by: Ryusuke Konishi --- fs/nilfs2/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c index 8e2ec43b18f4..151964f0de4c 100644 --- a/fs/nilfs2/super.c +++ b/fs/nilfs2/super.c @@ -416,8 +416,10 @@ int nilfs_attach_checkpoint(struct nilfs_sb_info *sbi, __u64 cno) if (unlikely(err)) goto failed; + down_read(&nilfs->ns_segctor_sem); err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, cno, 0, &raw_cp, &bh_cp); + up_read(&nilfs->ns_segctor_sem); if (unlikely(err)) { if (err == -ENOENT || err == -EINVAL) { printk(KERN_ERR From 6b99ecec25c8fd501e74306f5d23dd0365065e2a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 6 Aug 2009 23:00:38 +0200 Subject: [PATCH 204/338] microblaze: use the generic ack_bad_irq implementation Signed-off-by: Christoph Hellwig Signed-off-by: Michal Simek --- arch/microblaze/include/asm/hardirq.h | 2 -- arch/microblaze/kernel/irq.c | 9 --------- 2 files changed, 11 deletions(-) diff --git a/arch/microblaze/include/asm/hardirq.h b/arch/microblaze/include/asm/hardirq.h index 41e1e1aa36ac..cd1ac9aad56c 100644 --- a/arch/microblaze/include/asm/hardirq.h +++ b/arch/microblaze/include/asm/hardirq.h @@ -12,8 +12,6 @@ /* should be defined in each interrupt controller driver */ extern unsigned int get_irq(struct pt_regs *regs); -#define ack_bad_irq ack_bad_irq -void ack_bad_irq(unsigned int irq); #include #endif /* _ASM_MICROBLAZE_HARDIRQ_H */ diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c index f688ee93e3b9..7d5ddd62d4d2 100644 --- a/arch/microblaze/kernel/irq.c +++ b/arch/microblaze/kernel/irq.c @@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) } EXPORT_SYMBOL_GPL(irq_of_parse_and_map); -/* - * 'what should we do if we get a hw irq event on an illegal vector'. - * each architecture has to answer this themselves. - */ -void ack_bad_irq(unsigned int irq) -{ - printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq); -} - static u32 concurrent_irq; void do_IRQ(struct pt_regs *regs) From 892ee92b81b6e7fa5f6147c96e11c6c1b9802fc6 Mon Sep 17 00:00:00 2001 From: John Williams Date: Wed, 29 Jul 2009 22:08:40 +1000 Subject: [PATCH 205/338] microblaze: Sane handling of missing timer/intc in device tree This code path doesn't test any returned pointers for NULL, leading to a bad kernel page fault if there's no timer/intc found. Slightly better is to BUG(), but even better still would be a printk beforehand. Signed-off-by: John Williams Signed-off-by: Michal Simek --- arch/microblaze/kernel/intc.c | 2 ++ arch/microblaze/kernel/timer.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index b15605299a57..6eea6f92b84e 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -130,6 +131,7 @@ void __init init_IRQ(void) if (intc) break; } + BUG_ON(!intc); intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL); intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE); diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index bdfa2f9f0c81..5499deae7fa6 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -234,6 +235,7 @@ void __init time_init(void) if (timer) break; } + BUG_ON(!timer); timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL); timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE); From 2856ed35ead295a7cc8788d9ba860e746dfc92bb Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 6 Aug 2009 16:00:52 +0200 Subject: [PATCH 206/338] microblaze: Enable ppoll syscall Signed-off-by: Michal Simek --- arch/microblaze/kernel/syscall_table.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 216db817beb6..457216097dfd 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -313,7 +313,7 @@ ENTRY(sys_call_table) .long sys_fchmodat .long sys_faccessat .long sys_ni_syscall /* pselect6 */ - .long sys_ni_syscall /* sys_ppoll */ + .long sys_ppoll .long sys_unshare /* 310 */ .long sys_set_robust_list .long sys_get_robust_list From 8f37b6c9852ff79cc8472c44ea6f6485dfd58bd2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 11 Aug 2009 12:36:12 +0200 Subject: [PATCH 207/338] microblaze: Use klimit instead of _end for memory init For noMMU system when you use larger rootfs image there is problem with using _end label because we increase klimit but in memory initialization we use still _end which is wrong. Larger mtd rootfs was rewritten by init_bootmem_node. MMU kernel use static initialization where klimit is setup to _end. There is no any other hanling with klimit. Signed-off-by: Michal Simek --- arch/microblaze/mm/init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 8d92c4efe9a4..f207f1a94dbc 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -130,13 +130,13 @@ void __init setup_memory(void) * (in case the address isn't page-aligned). */ #ifndef CONFIG_MMU - map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)), + map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #else map_size = init_bootmem_node(&contig_page_data, - PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn); + PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); #endif - lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size); + lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size); /* free bootmem is whole main memory */ free_bootmem(memory_start, memory_size); From 1fef7891755d99039592aa8d1ed02e981f38de15 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 18 Aug 2009 11:05:11 +0200 Subject: [PATCH 208/338] microblaze: Update Microblaze defconfigs Signed-off-by: Michal Simek --- arch/microblaze/configs/mmu_defconfig | 70 ++++++++++--------- arch/microblaze/configs/nommu_defconfig | 91 +++++++++++++++---------- 2 files changed, 91 insertions(+), 70 deletions(-) diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig index bd0b85ec38f5..09c32962b66f 100644 --- a/arch/microblaze/configs/mmu_defconfig +++ b/arch/microblaze/configs/mmu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Fri May 22 10:02:33 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 11:00:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y +# CONFIG_PCI is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0 CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set -CONFIG_INITRAMFS_COMPRESSION_NONE=y -# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +# CONFIG_INITRAMFS_COMPRESSION_NONE is not set +CONFIG_INITRAMFS_COMPRESSION_GZIP=y # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -84,13 +87,22 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # # Exectuable file formats @@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set +# CONFIG_KMEMCHECK is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y CONFIG_DEBUG_BOOTMEM=y @@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index 4ef6af0a8f31..8b638615a972 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Mon May 11 09:01:02 2009 +# Linux kernel version: 2.6.31-rc6 +# Tue Aug 18 10:35:30 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_CSUM=y # CONFIG_PCI is not set -# CONFIG_NO_DMA is not set +CONFIG_NO_DMA=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyUL0,115200" # CONFIG_CMDLINE_FORCE is not set CONFIG_OF=y -CONFIG_OF_DEVICE=y CONFIG_PROC_DEVICETREE=y + +# +# Advanced setup +# + +# +# Default settings for advanced configuration options are used +# +CONFIG_KERNEL_START=0x90000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # @@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -254,7 +275,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set @@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set +# CONFIG_XILINX_HWICAP is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set # # Multifunction device drivers @@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y From 69ab849439b506cd8dd2879527fdb64d95dd5211 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 17 Aug 2009 14:07:16 +0200 Subject: [PATCH 209/338] genirq: Wake up irq thread after action has been installed The wake_up_process() of the new irq thread in __setup_irq() is too early as the irqaction is not yet fully initialized especially action->irq is not yet set. The interrupt thread might dereference the wrong irq descriptor. Move the wakeup after the action is installed and action->irq has been set. Reported-by: Michael Buesch Signed-off-by: Thomas Gleixner Tested-by: Michael Buesch --- kernel/irq/manage.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index d222515a5a06..0ec9ed831737 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -607,7 +607,6 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) */ get_task_struct(t); new->thread = t; - wake_up_process(t); } /* @@ -690,6 +689,7 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) (int)(new->flags & IRQF_TRIGGER_MASK)); } + new->irq = irq; *old_ptr = new; /* Reset broken irq detection when installing new handler */ @@ -707,7 +707,13 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) spin_unlock_irqrestore(&desc->lock, flags); - new->irq = irq; + /* + * Strictly no need to wake it up, but hung_task complains + * when no hard interrupt wakes the thread up. + */ + if (new->thread) + wake_up_process(new->thread); + register_irq_proc(irq, desc); new->dir = NULL; register_handler_proc(irq, new); From 78b89ecd731798f2fec8cc26ca90739253cec33c Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 18 Aug 2009 16:41:33 +0100 Subject: [PATCH 210/338] i386: Fix section mismatches for init code with !HOTPLUG_CPU Commit 0e83815be719d3391bf5ea24b7fe696c07dbd417 changed the section the initial_code variable gets allocated in, in an attempt to address a section conflict warning. This, however created a new section conflict when building without HOTPLUG_CPU. The apparently only (reasonable) way to address this is to always use __REFDATA. Once at it, also fix a second section mismatch when not using HOTPLUG_CPU. Signed-off-by: Jan Beulich Cc: Robert Richter LKML-Reference: <4A8AE7CD020000780001054B@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_32.S | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 0d98a01cbdb2..cc827ac9e8d3 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -261,9 +261,7 @@ page_pde_offset = (__PAGE_OFFSET >> 20); * which will be freed later */ -#ifndef CONFIG_HOTPLUG_CPU -.section .init.text,"ax",@progbits -#endif +__CPUINIT #ifdef CONFIG_SMP ENTRY(startup_32_smp) @@ -602,11 +600,7 @@ ignore_int: #endif iret -#ifndef CONFIG_HOTPLUG_CPU - __CPUINITDATA -#else __REFDATA -#endif .align 4 ENTRY(initial_code) .long i386_start_kernel From a924586036833086b262a371b09d1266c23bb4d1 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Wed, 19 Aug 2009 00:29:43 +0900 Subject: [PATCH 211/338] nilfs2: fix oopses with doubly mounted snapshots will fix kernel oopses like the following: # mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test1 # mount -t nilfs2 -r -o cp=20 /dev/sdb1 /test2 # umount /test1 # umount /test2 BUG: sleeping function called from invalid context at arch/x86/mm/fault.c:1069 in_atomic(): 0, irqs_disabled(): 1, pid: 3886, name: umount.nilfs2 1 lock held by umount.nilfs2/3886: #0: (&type->s_umount_key#31){+.+...}, at: [] deactivate_super+0x52/0x6c irq event stamp: 1219 hardirqs last enabled at (1219): [] __mutex_unlock_slowpath+0xf8/0x119 hardirqs last disabled at (1218): [] __mutex_unlock_slowpath+0x59/0x119 softirqs last enabled at (1214): [] __do_softirq+0x1a5/0x1ad softirqs last disabled at (1205): [] do_softirq+0x36/0x5a Pid: 3886, comm: umount.nilfs2 Not tainted 2.6.31-rc6 #55 Call Trace: [] __might_sleep+0x107/0x10e [] do_page_fault+0x246/0x397 [] ? do_page_fault+0x0/0x397 [] error_code+0x6b/0x70 [] ? do_page_fault+0x0/0x397 [] ? __lock_acquire+0x91/0x12fd [] ? __lock_acquire+0x12ee/0x12fd [] ? __lock_acquire+0x12ee/0x12fd [] lock_acquire+0xba/0xdd [] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2] [] down_write+0x2a/0x46 [] ? nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2] [] nilfs_detach_segment_constructor+0x2f/0x2fa [nilfs2] [] ? mark_held_locks+0x43/0x5b [] ? trace_hardirqs_on_caller+0x10b/0x133 [] ? trace_hardirqs_on+0xb/0xd [] nilfs_put_super+0x2f/0xca [nilfs2] [] generic_shutdown_super+0x49/0xb8 [] kill_block_super+0x1d/0x31 [] ? vfs_quota_off+0x0/0x12 [] deactivate_super+0x57/0x6c [] mntput_no_expire+0x8c/0xb4 [] sys_umount+0x27f/0x2a4 [] sys_oldumount+0xd/0xf [] sysenter_do_call+0x12/0x38 ... This turns out to be a bug brought by an -rc1 patch ("nilfs2: simplify remaining sget() use"). In the patch, a new "put resource" function, nilfs_put_sbinfo() was introduced to delay freeing nilfs_sb_info struct. But the nilfs_put_sbinfo() mistakenly used atomic_dec_and_test() function to check the reference count, and it caused the nilfs_sb_info was freed when user mounted a snapshot twice. This bug also suggests there was unseen memory leak in usual mount /umount operations for nilfs. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/the_nilfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/the_nilfs.h b/fs/nilfs2/the_nilfs.h index e8adbffc626f..1b9caafb8662 100644 --- a/fs/nilfs2/the_nilfs.h +++ b/fs/nilfs2/the_nilfs.h @@ -253,7 +253,7 @@ nilfs_detach_writer(struct the_nilfs *nilfs, struct nilfs_sb_info *sbi) static inline void nilfs_put_sbinfo(struct nilfs_sb_info *sbi) { - if (!atomic_dec_and_test(&sbi->s_count)) + if (atomic_dec_and_test(&sbi->s_count)) kfree(sbi); } From a58578e47f004017cf47803ad372490806630e58 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 18 Aug 2009 13:47:37 -0400 Subject: [PATCH 212/338] security: Make LSM_MMAP_MIN_ADDR default match its help text. Commit 788084aba2ab7348257597496befcbccabdc98a3 added the LSM_MMAP_MIN_ADDR option, whose help text states "For most ia64, ppc64 and x86 users with lots of address space a value of 65536 is reasonable and should cause no problems." Which implies that it's default setting was typoed. Signed-off-by: Dave Jones Acked-by: Eric Paris Signed-off-by: James Morris --- security/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/Kconfig b/security/Kconfig index 9c60c346a91d..bba92689b567 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -116,7 +116,7 @@ config SECURITY_ROOTPLUG config LSM_MMAP_MIN_ADDR int "Low address space for LSM to from user allocation" depends on SECURITY && SECURITY_SELINUX - default 65535 + default 65536 help This is the portion of low virtual memory which should be protected from userspace allocation. Keeping a user from writing to low pages From 024e6cb408307de41cbfcb1e5a170d9af60ab2a9 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 18 Aug 2009 22:14:29 +0200 Subject: [PATCH 213/338] security: Fix prompt for LSM_MMAP_MIN_ADDR Fix prompt for LSM_MMAP_MIN_ADDR. (Verbs are cool!) Signed-off-by: Andreas Schwab Acked-by: Eric Paris Signed-off-by: James Morris --- security/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/Kconfig b/security/Kconfig index bba92689b567..4c865345caa0 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -114,7 +114,7 @@ config SECURITY_ROOTPLUG If you are unsure how to answer this question, answer N. config LSM_MMAP_MIN_ADDR - int "Low address space for LSM to from user allocation" + int "Low address space for LSM to protect from user allocation" depends on SECURITY && SECURITY_SELINUX default 65536 help From 6b6f0b6c131321e1bc34c47b7f671b0360315402 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 18 Aug 2009 14:11:06 -0700 Subject: [PATCH 214/338] MAINTAINERS: OSD LIBRARY and FILESYSTEM pattern fix Signed-off-by: Joe Perches Acked-by: Benny Halevy Cc: Boaz Harrosh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 557d4dcc2c2c..ac0fdfd2e508 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3809,7 +3809,7 @@ W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git S: Maintained F: drivers/scsi/osd/ -F: drivers/include/scsi/osd_* +F: include/scsi/osd_* F: fs/exofs/ P54 WIRELESS DRIVER From 89a4eb4b66e8f4d395e14a14d262dac4d6ca52f0 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 18 Aug 2009 14:11:08 -0700 Subject: [PATCH 215/338] vfs: make get_sb_pseudo set s_maxbytes to value that can be cast to signed get_sb_pseudo sets s_maxbytes to ~0ULL which becomes negative when cast to a signed value. Fix it to use MAX_LFS_FILESIZE which casts properly to a positive signed value. Signed-off-by: Jeff Layton Reviewed-by: Johannes Weiner Acked-by: Steve French Reviewed-by: Christoph Hellwig Cc: Al Viro Cc: Robert Love Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/libfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/libfs.c b/fs/libfs.c index ddfa89948c3f..dcec3d3ea64f 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -217,7 +217,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name, return PTR_ERR(s); s->s_flags = MS_NOUSER; - s->s_maxbytes = ~0ULL; + s->s_maxbytes = MAX_LFS_FILESIZE; s->s_blocksize = PAGE_SIZE; s->s_blocksize_bits = PAGE_SHIFT; s->s_magic = magic; From 0753ba01e126020bf0f8150934903b48935b697d Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 18 Aug 2009 14:11:10 -0700 Subject: [PATCH 216/338] mm: revert "oom: move oom_adj value" The commit 2ff05b2b (oom: move oom_adj value) moveed the oom_adj value to the mm_struct. It was a very good first step for sanitize OOM. However Paul Menage reported the commit makes regression to his job scheduler. Current OOM logic can kill OOM_DISABLED process. Why? His program has the code of similar to the following. ... set_oom_adj(OOM_DISABLE); /* The job scheduler never killed by oom */ ... if (vfork() == 0) { set_oom_adj(0); /* Invoked child can be killed */ execve("foo-bar-cmd"); } .... vfork() parent and child are shared the same mm_struct. then above set_oom_adj(0) doesn't only change oom_adj for vfork() child, it's also change oom_adj for vfork() parent. Then, vfork() parent (job scheduler) lost OOM immune and it was killed. Actually, fork-setting-exec idiom is very frequently used in userland program. We must not break this assumption. Then, this patch revert commit 2ff05b2b and related commit. Reverted commit list --------------------- - commit 2ff05b2b4e (oom: move oom_adj value from task_struct to mm_struct) - commit 4d8b9135c3 (oom: avoid unnecessary mm locking and scanning for OOM_DISABLE) - commit 8123681022 (oom: only oom kill exiting tasks with attached memory) - commit 933b787b57 (mm: copy over oom_adj value at fork time) Signed-off-by: KOSAKI Motohiro Cc: Paul Menage Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: Rik van Riel Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Nick Piggin Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/proc.txt | 15 +++---- fs/proc/base.c | 19 ++------- include/linux/mm_types.h | 2 - include/linux/sched.h | 1 + kernel/fork.c | 1 - mm/oom_kill.c | 64 ++++++++++++++++++------------ 6 files changed, 48 insertions(+), 54 deletions(-) diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fad18f9456e4..ffead13f9443 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1167,13 +1167,11 @@ CHAPTER 3: PER-PROCESS PARAMETERS 3.1 /proc//oom_adj - Adjust the oom-killer score ------------------------------------------------------ -This file can be used to adjust the score used to select which processes should -be killed in an out-of-memory situation. The oom_adj value is a characteristic -of the task's mm, so all threads that share an mm with pid will have the same -oom_adj value. A high value will increase the likelihood of this process being -killed by the oom-killer. Valid values are in the range -16 to +15 as -explained below and a special value of -17, which disables oom-killing -altogether for threads sharing pid's mm. +This file can be used to adjust the score used to select which processes +should be killed in an out-of-memory situation. Giving it a high score will +increase the likelihood of this process being killed by the oom-killer. Valid +values are in the range -16 to +15, plus the special value -17, which disables +oom-killing altogether for this process. The process to be killed in an out-of-memory situation is selected among all others based on its badness score. This value equals the original memory size of the process @@ -1187,9 +1185,6 @@ the parent's score if they do not share the same memory. Thus forking servers are the prime candidates to be killed. Having only one 'hungry' child will make parent less preferable than the child. -/proc//oom_adj cannot be changed for kthreads since they are immune from -oom-killing already. - /proc//oom_score shows process' current badness score. The following heuristics are then applied: diff --git a/fs/proc/base.c b/fs/proc/base.c index 175db258942f..6f742f6658a9 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1003,12 +1003,7 @@ static ssize_t oom_adjust_read(struct file *file, char __user *buf, if (!task) return -ESRCH; - task_lock(task); - if (task->mm) - oom_adjust = task->mm->oom_adj; - else - oom_adjust = OOM_DISABLE; - task_unlock(task); + oom_adjust = task->oomkilladj; put_task_struct(task); len = snprintf(buffer, sizeof(buffer), "%i\n", oom_adjust); @@ -1037,19 +1032,11 @@ static ssize_t oom_adjust_write(struct file *file, const char __user *buf, task = get_proc_task(file->f_path.dentry->d_inode); if (!task) return -ESRCH; - task_lock(task); - if (!task->mm) { - task_unlock(task); - put_task_struct(task); - return -EINVAL; - } - if (oom_adjust < task->mm->oom_adj && !capable(CAP_SYS_RESOURCE)) { - task_unlock(task); + if (oom_adjust < task->oomkilladj && !capable(CAP_SYS_RESOURCE)) { put_task_struct(task); return -EACCES; } - task->mm->oom_adj = oom_adjust; - task_unlock(task); + task->oomkilladj = oom_adjust; put_task_struct(task); if (end - buffer == 0) return -EIO; diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 7acc8439d9b3..0042090a4d70 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -240,8 +240,6 @@ struct mm_struct { unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */ - s8 oom_adj; /* OOM kill score adjustment (bit shift) */ - cpumask_t cpu_vm_mask; /* Architecture-specific MM context */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 3ab08e4bb6b8..0f1ea4a66957 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1198,6 +1198,7 @@ struct task_struct { * a short time */ unsigned char fpu_counter; + s8 oomkilladj; /* OOM kill score adjustment (bit shift). */ #ifdef CONFIG_BLK_DEV_IO_TRACE unsigned int btrace_seq; #endif diff --git a/kernel/fork.c b/kernel/fork.c index 021e1138556e..144326b7af50 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -426,7 +426,6 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p) init_rwsem(&mm->mmap_sem); INIT_LIST_HEAD(&mm->mmlist); mm->flags = (current->mm) ? current->mm->flags : default_dump_filter; - mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0; mm->core_state = NULL; mm->nr_ptes = 0; set_mm_counter(mm, file_rss, 0); diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 175a67a78a99..a7b2460e922b 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -58,7 +58,6 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) unsigned long points, cpu_time, run_time; struct mm_struct *mm; struct task_struct *child; - int oom_adj; task_lock(p); mm = p->mm; @@ -66,11 +65,6 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) task_unlock(p); return 0; } - oom_adj = mm->oom_adj; - if (oom_adj == OOM_DISABLE) { - task_unlock(p); - return 0; - } /* * The memory size of the process is the basis for the badness. @@ -154,15 +148,15 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) points /= 8; /* - * Adjust the score by oom_adj. + * Adjust the score by oomkilladj. */ - if (oom_adj) { - if (oom_adj > 0) { + if (p->oomkilladj) { + if (p->oomkilladj > 0) { if (!points) points = 1; - points <<= oom_adj; + points <<= p->oomkilladj; } else - points >>= -(oom_adj); + points >>= -(p->oomkilladj); } #ifdef DEBUG @@ -257,8 +251,11 @@ static struct task_struct *select_bad_process(unsigned long *ppoints, *ppoints = ULONG_MAX; } + if (p->oomkilladj == OOM_DISABLE) + continue; + points = badness(p, uptime.tv_sec); - if (points > *ppoints) { + if (points > *ppoints || !chosen) { chosen = p; *ppoints = points; } @@ -307,7 +304,8 @@ static void dump_tasks(const struct mem_cgroup *mem) } printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n", p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm, - get_mm_rss(mm), (int)task_cpu(p), mm->oom_adj, p->comm); + get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj, + p->comm); task_unlock(p); } while_each_thread(g, p); } @@ -325,8 +323,11 @@ static void __oom_kill_task(struct task_struct *p, int verbose) return; } - if (!p->mm) + if (!p->mm) { + WARN_ON(1); + printk(KERN_WARNING "tried to kill an mm-less task!\n"); return; + } if (verbose) printk(KERN_ERR "Killed process %d (%s)\n", @@ -348,13 +349,28 @@ static int oom_kill_task(struct task_struct *p) struct mm_struct *mm; struct task_struct *g, *q; - task_lock(p); mm = p->mm; - if (!mm || mm->oom_adj == OOM_DISABLE) { - task_unlock(p); + + /* WARNING: mm may not be dereferenced since we did not obtain its + * value from get_task_mm(p). This is OK since all we need to do is + * compare mm to q->mm below. + * + * Furthermore, even if mm contains a non-NULL value, p->mm may + * change to NULL at any time since we do not hold task_lock(p). + * However, this is of no concern to us. + */ + + if (mm == NULL) return 1; - } - task_unlock(p); + + /* + * Don't kill the process if any threads are set to OOM_DISABLE + */ + do_each_thread(g, q) { + if (q->mm == mm && q->oomkilladj == OOM_DISABLE) + return 1; + } while_each_thread(g, q); + __oom_kill_task(p, 1); /* @@ -377,11 +393,10 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, struct task_struct *c; if (printk_ratelimit()) { - task_lock(current); printk(KERN_WARNING "%s invoked oom-killer: " - "gfp_mask=0x%x, order=%d, oom_adj=%d\n", - current->comm, gfp_mask, order, - current->mm ? current->mm->oom_adj : OOM_DISABLE); + "gfp_mask=0x%x, order=%d, oomkilladj=%d\n", + current->comm, gfp_mask, order, current->oomkilladj); + task_lock(current); cpuset_print_task_mems_allowed(current); task_unlock(current); dump_stack(); @@ -394,9 +409,8 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order, /* * If the task is already exiting, don't alarm the sysadmin or kill * its children or threads, just set TIF_MEMDIE so it can die quickly - * if its mm is still attached. */ - if (p->mm && (p->flags & PF_EXITING)) { + if (p->flags & PF_EXITING) { __oom_kill_task(p, 0); return 0; } From b2503a9408e44eb0531adc3436c513ea70f91c42 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 18 Aug 2009 14:11:12 -0700 Subject: [PATCH 217/338] mmc: add the new linux-mmc mailing list to MAINTAINERS There are a number of individual MMC drivers listed in MAINTAINERS. I didn't modify those records. Perhaps I should have. Cc: Cc: Manuel Lauss Cc: Nicolas Pitre Cc: Pierre Ossman Cc: Pavel Pisa Cc: Jarkko Lavinen Cc: Ben Dooks Cc: Sascha Sommer Cc: Ian Molton Cc: Joseph Chan Cc: Harald Welte Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index ac0fdfd2e508..60299a9a7adb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3429,6 +3429,7 @@ F: drivers/mfd/ MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM S: Orphan +L: linux-mmc@vger.kernel.org F: drivers/mmc/ F: include/linux/mmc/ From b8978784544e8b4e8fbacb558df8580957d4f8a5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 18 Aug 2009 14:11:16 -0700 Subject: [PATCH 218/338] spi_s3c24xx: fix clock rate calculation Currently the clock rate calculation may round as pleased, which means that it is possible that we will round down and end up with a faster clock rate than intended. Change the calculation to use DIV_ROUND_UP() to ensure that we end up with a clock rate either the same as or lower than the user requested one. Signed-off-by: Ben Dooks Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index e0d44af4745a..590be85c8f3d 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -111,6 +111,7 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, unsigned int bpw; unsigned int hz; unsigned int div; + unsigned long clk; bpw = t ? t->bits_per_word : spi->bits_per_word; hz = t ? t->speed_hz : spi->max_speed_hz; @@ -120,20 +121,16 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, return -EINVAL; } - div = clk_get_rate(hw->clk) / hz; - - /* is clk = pclk / (2 * (pre+1)), or is it - * clk = (pclk * 2) / ( pre + 1) */ - - div /= 2; - - if (div > 0) - div -= 1; + clk = clk_get_rate(hw->clk); + div = DIV_ROUND_UP(clk, hz * 2) - 1; if (div > 255) div = 255; - dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz); + dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n", + div, hz, clk / (2 * (div + 1))); + + writeb(div, hw->regs + S3C2410_SPPRE); spin_lock(&hw->bitbang.lock); From 191529756633052680dd9d23ad63744ca5aa02a1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 18 Aug 2009 14:11:17 -0700 Subject: [PATCH 219/338] spi_s3c24xx: fix transfer setup code Since the changes to the bitbang driver, there is the possibility we will be called with either the speed_hz or bpw values zero. We take these to mean that the default values (8 bits per word, or maximum bus speed). Signed-off-by: Ben Dooks Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 590be85c8f3d..3f3119d760db 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -116,6 +116,12 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi, bpw = t ? t->bits_per_word : spi->bits_per_word; hz = t ? t->speed_hz : spi->max_speed_hz; + if (!bpw) + bpw = 8; + + if (!hz) + hz = spi->max_speed_hz; + if (bpw != 8) { dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); return -EINVAL; From 28d7a6ae92c099d81cbea08c20be0d2cf7ccd7ca Mon Sep 17 00:00:00 2001 From: Graff Yang Date: Tue, 18 Aug 2009 14:11:17 -0700 Subject: [PATCH 220/338] nommu: check fd read permission in validate_mmap_request() According to the POSIX (1003.1-2008), the file descriptor shall have been opened with read permission, regardless of the protection options specified to mmap(). The ltp test cases mmap06/07 need this. Signed-off-by: Graff Yang Acked-by: Paul Mundt Signed-off-by: David Howells Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/nommu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/nommu.c b/mm/nommu.c index 28754c40be98..4bde489ec431 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -919,6 +919,10 @@ static int validate_mmap_request(struct file *file, if (!file->f_op->read) capabilities &= ~BDI_CAP_MAP_COPY; + /* The file shall have been opened with read permission. */ + if (!(file->f_mode & FMODE_READ)) + return -EACCES; + if (flags & MAP_SHARED) { /* do checks for writing, appending and locking */ if ((prot & PROT_WRITE) && From 503f7944fac68f4fdf71f8ebd06907f51eb64515 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 18 Aug 2009 14:11:18 -0700 Subject: [PATCH 221/338] REPORTING-BUGS: add get_maintainer.pl blurb Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- REPORTING-BUGS | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/REPORTING-BUGS b/REPORTING-BUGS index ab0c56630a8c..55a6074ccbb7 100644 --- a/REPORTING-BUGS +++ b/REPORTING-BUGS @@ -15,7 +15,10 @@ worry too much about getting the wrong person. If you are unsure send it to the person responsible for the code relevant to what you were doing. If it occurs repeatably try and describe how to recreate it. That is worth even more than the oops itself. The list of maintainers and -mailing lists is in the MAINTAINERS file in this directory. +mailing lists is in the MAINTAINERS file in this directory. If you +know the file name that causes the problem you can use the following +command in this directory to find some of the maintainers of that file: + perl scripts/get_maintainer.pl -f If it is a security bug, please copy the Security Contact listed in the MAINTAINERS file. They can help coordinate bugfix and disclosure. From 7f9cfb31030737a7fc9a1cbca3fd01bec184c849 Mon Sep 17 00:00:00 2001 From: Bo Liu Date: Tue, 18 Aug 2009 14:11:19 -0700 Subject: [PATCH 222/338] mm: build_zonelists(): move clear node_load[] to __build_all_zonelists() If node_load[] is cleared everytime build_zonelists() is called,node_load[] will have no help to find the next node that should appear in the given node's fallback list. Because of the bug, zonelist's node_order is not calculated as expected. This bug affects on big machine, which has asynmetric node distance. [synmetric NUMA's node distance] 0 1 2 0 10 12 12 1 12 10 12 2 12 12 10 [asynmetric NUMA's node distance] 0 1 2 0 10 12 20 1 12 10 14 2 20 14 10 This (my bug) is very old but no one has reported this for a long time. Maybe because the number of asynmetric NUMA is very small and they use cpuset for customizing node memory allocation fallback. [akpm@linux-foundation.org: fix CONFIG_NUMA=n build] Signed-off-by: Bo Liu Reviewed-by: KAMEZAWA Hiroyuki Cc: Mel Gorman Cc: Christoph Lameter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d052abbe3063..5cc986eb9f6f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2544,7 +2544,6 @@ static void build_zonelists(pg_data_t *pgdat) prev_node = local_node; nodes_clear(used_mask); - memset(node_load, 0, sizeof(node_load)); memset(node_order, 0, sizeof(node_order)); j = 0; @@ -2653,6 +2652,9 @@ static int __build_all_zonelists(void *dummy) { int nid; +#ifdef CONFIG_NUMA + memset(node_load, 0, sizeof(node_load)); +#endif for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); From eda1e328556565e211b7450250e40d6de751563a Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 11 Aug 2009 17:29:04 +0200 Subject: [PATCH 223/338] tracing: handle broken names in ftrace filter If one filter item (for set_ftrace_filter and set_ftrace_notrace) is being setup by more than 1 consecutive writes (FTRACE_ITER_CONT flag), it won't be handled corretly. I used following program to test/verify: [snip] #include #include #include #include #include int main(int argc, char **argv) { int fd, i; char *file = argv[1]; if (-1 == (fd = open(file, O_WRONLY))) { perror("open failed"); return -1; } for(i = 0; i < (argc - 2); i++) { int len = strlen(argv[2+i]); int cnt, off = 0; while(len) { cnt = write(fd, argv[2+i] + off, len); len -= cnt; off += cnt; } } close(fd); return 0; } [snip] before change: sh-4.0# echo > ./set_ftrace_filter sh-4.0# /test ./set_ftrace_filter "sys" "_open " sh-4.0# cat ./set_ftrace_filter #### all functions enabled #### sh-4.0# after change: sh-4.0# echo > ./set_ftrace_notrace sh-4.0# test ./set_ftrace_notrace "sys" "_open " sh-4.0# cat ./set_ftrace_notrace sys_open sh-4.0# Signed-off-by: Jiri Olsa LKML-Reference: <20090811152904.GA26065@jolsa.lab.eng.brq.redhat.com> Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 1e1d23c26308..25edd5cc5935 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2278,7 +2278,11 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, read++; cnt--; - if (!(iter->flags & ~FTRACE_ITER_CONT)) { + /* + * If the parser haven't finished with the last write, + * continue reading the user input without skipping spaces. + */ + if (!(iter->flags & FTRACE_ITER_CONT)) { /* skip white space */ while (cnt && isspace(ch)) { ret = get_user(ch, ubuf++); @@ -2288,8 +2292,9 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, cnt--; } + /* only spaces were written */ if (isspace(ch)) { - file->f_pos += read; + *ppos += read; ret = read; goto out; } @@ -2319,12 +2324,12 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, if (ret) goto out; iter->buffer_idx = 0; - } else + } else { iter->flags |= FTRACE_ITER_CONT; + iter->buffer[iter->buffer_idx++] = ch; + } - - file->f_pos += read; - + *ppos += read; ret = read; out: mutex_unlock(&ftrace_regex_lock); From e2c6cbd9ace61039d3de39e717195e38f1492aee Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Tue, 18 Aug 2009 20:16:55 -0700 Subject: [PATCH 224/338] sparc: sys32.S incorrect compat-layer splice() system call I think arch/sparc/kernel/sys32.S has an incorrect splice definition: SIGN2(sys32_splice, sys_splice, %o0, %o1) The splice() prototype looks like : long splice(int fd_in, loff_t *off_in, int fd_out, loff_t *off_out, size_t len, unsigned int flags); So I think we should have : SIGN2(sys32_splice, sys_splice, %o0, %o2) Signed-off-by: Mathieu Desnoyers Signed-off-by: David S. Miller --- arch/sparc/kernel/sys32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 577f8fab8b6b..aed94869ad6a 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -134,7 +134,7 @@ SIGN1(sys32_getpeername, sys_getpeername, %o0) SIGN1(sys32_getsockname, sys_getsockname, %o0) SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1) SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2) -SIGN2(sys32_splice, sys_splice, %o0, %o1) +SIGN2(sys32_splice, sys_splice, %o0, %o2) SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5) SIGN2(sys32_tee, sys_tee, %o0, %o1) SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0) From e7a5965a81a29a13cd4994fa23a6a7a1488bcdb6 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 18 Aug 2009 20:21:40 -0700 Subject: [PATCH 225/338] yellowfin: Fix buffer underrun after dev_alloc_skb() failure yellowfin_init_ring() needs to clean up if dev_alloc_skb() fails and should pass an error status up to the caller. This also prevents an buffer underrun if failure occurred in the first iteration. yellowfin_open() which calls yellowfin_init_ring() should free its requested irq upon failure. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/yellowfin.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index a07580138e81..c2fd6187773f 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -346,7 +346,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int yellowfin_open(struct net_device *dev); static void yellowfin_timer(unsigned long data); static void yellowfin_tx_timeout(struct net_device *dev); -static void yellowfin_init_ring(struct net_device *dev); +static int yellowfin_init_ring(struct net_device *dev); static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev); static irqreturn_t yellowfin_interrupt(int irq, void *dev_instance); static int yellowfin_rx(struct net_device *dev); @@ -573,19 +573,24 @@ static int yellowfin_open(struct net_device *dev) { struct yellowfin_private *yp = netdev_priv(dev); void __iomem *ioaddr = yp->base; - int i; + int i, ret; /* Reset the chip. */ iowrite32(0x80000000, ioaddr + DMACtrl); - i = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev); - if (i) return i; + ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev); + if (ret) + return ret; if (yellowfin_debug > 1) printk(KERN_DEBUG "%s: yellowfin_open() irq %d.\n", dev->name, dev->irq); - yellowfin_init_ring(dev); + ret = yellowfin_init_ring(dev); + if (ret) { + free_irq(dev->irq, dev); + return ret; + } iowrite32(yp->rx_ring_dma, ioaddr + RxPtr); iowrite32(yp->tx_ring_dma, ioaddr + TxPtr); @@ -725,10 +730,10 @@ static void yellowfin_tx_timeout(struct net_device *dev) } /* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void yellowfin_init_ring(struct net_device *dev) +static int yellowfin_init_ring(struct net_device *dev) { struct yellowfin_private *yp = netdev_priv(dev); - int i; + int i, j; yp->tx_full = 0; yp->cur_rx = yp->cur_tx = 0; @@ -753,6 +758,11 @@ static void yellowfin_init_ring(struct net_device *dev) yp->rx_ring[i].addr = cpu_to_le32(pci_map_single(yp->pci_dev, skb->data, yp->rx_buf_sz, PCI_DMA_FROMDEVICE)); } + if (i != RX_RING_SIZE) { + for (j = 0; j < i; j++) + dev_kfree_skb(yp->rx_skbuff[j]); + return -ENOMEM; + } yp->rx_ring[i-1].dbdma_cmd = cpu_to_le32(CMD_STOP); yp->dirty_rx = (unsigned int)(i - RX_RING_SIZE); @@ -769,8 +779,6 @@ static void yellowfin_init_ring(struct net_device *dev) yp->tx_ring[--i].dbdma_cmd = cpu_to_le32(CMD_STOP | BRANCH_ALWAYS); #else { - int j; - /* Tx ring needs a pair of descriptors, the second for the status. */ for (i = 0; i < TX_RING_SIZE; i++) { j = 2*i; @@ -805,7 +813,7 @@ static void yellowfin_init_ring(struct net_device *dev) } #endif yp->tx_tail_desc = &yp->tx_status[0]; - return; + return 0; } static int yellowfin_start_xmit(struct sk_buff *skb, struct net_device *dev) From 80e6914db18e702549a15dea36fa7ace17f25c50 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 17 Aug 2009 10:22:37 +1000 Subject: [PATCH 226/338] drm/radeon/kms: although LVDS might be possible on crtc 1 don't do it. LVDS always requests RMX_FULL, we need to fix it so that doesn't happen before we can enable LVDS on crtc 1. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 34d0f58eb944..9322675ef6d0 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -1066,6 +1066,7 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_LVDS: + encoder->possible_crtcs = 0x1; drm_encoder_init(dev, encoder, &radeon_legacy_lvds_enc_funcs, DRM_MODE_ENCODER_LVDS); drm_encoder_helper_add(encoder, &radeon_legacy_lvds_helper_funcs); if (rdev->is_atom_bios) From bf8e828b00a5b6a0fea16f452be578c060d57d64 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 17 Aug 2009 10:20:47 +1000 Subject: [PATCH 227/338] drm/radeon/kms: memset the allocated framebuffer before using it. This gets rid of some ugliness, we shuold probably find a way for the GPU to zero this. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_fb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 3206c0ad7b6c..ec383edf5f38 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -574,6 +574,8 @@ int radeonfb_create(struct radeon_device *rdev, goto out_unref; } + memset_io(fbptr, 0, aligned_size); + strcpy(info->fix.id, "radeondrmfb"); info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = FB_VISUAL_TRUECOLOR; From 6a719e05330ef19acd9392dbbfb95a774776dee5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 17 Aug 2009 10:19:51 +1000 Subject: [PATCH 228/338] drm/kms/radeon: cleanup combios TV table like DDX. The fallback case wasn't getting executed properly if there was no TV table, which my T42 M7 hasn't got. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 48 ++++++++++--------------- 1 file changed, 19 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index afc4db280b94..2a027e00762a 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -685,23 +685,15 @@ static const uint32_t default_tvdac_adj[CHIP_LAST] = { 0x00780000, /* rs480 */ }; -static struct radeon_encoder_tv_dac - *radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev) +static void radeon_legacy_get_tv_dac_info_from_table(struct radeon_device *rdev, + struct radeon_encoder_tv_dac *tv_dac) { - struct radeon_encoder_tv_dac *tv_dac = NULL; - - tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL); - - if (!tv_dac) - return NULL; - tv_dac->ps2_tvdac_adj = default_tvdac_adj[rdev->family]; if ((rdev->flags & RADEON_IS_MOBILITY) && (rdev->family == CHIP_RV250)) tv_dac->ps2_tvdac_adj = 0x00880000; tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj; tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj; - - return tv_dac; + return; } struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct @@ -713,19 +705,18 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct uint16_t dac_info; uint8_t rev, bg, dac; struct radeon_encoder_tv_dac *tv_dac = NULL; + int found = 0; + + tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL); + if (!tv_dac) + return NULL; if (rdev->bios == NULL) - return radeon_legacy_get_tv_dac_info_from_table(rdev); + goto out; /* first check TV table */ dac_info = combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (dac_info) { - tv_dac = - kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL); - - if (!tv_dac) - return NULL; - rev = RBIOS8(dac_info + 0x3); if (rev > 4) { bg = RBIOS8(dac_info + 0xc) & 0xf; @@ -739,6 +730,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct bg = RBIOS8(dac_info + 0x10) & 0xf; dac = RBIOS8(dac_info + 0x11) & 0xf; tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); + found = 1; } else if (rev > 1) { bg = RBIOS8(dac_info + 0xc) & 0xf; dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf; @@ -751,22 +743,15 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct bg = RBIOS8(dac_info + 0xe) & 0xf; dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf; tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20); + found = 1; } - tv_dac->tv_std = radeon_combios_get_tv_info(encoder); - - } else { + } + if (!found) { /* then check CRT table */ dac_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); if (dac_info) { - tv_dac = - kzalloc(sizeof(struct radeon_encoder_tv_dac), - GFP_KERNEL); - - if (!tv_dac) - return NULL; - rev = RBIOS8(dac_info) & 0x3; if (rev < 2) { bg = RBIOS8(dac_info + 0x3) & 0xf; @@ -775,6 +760,7 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct (bg << 16) | (dac << 20); tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj; tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj; + found = 1; } else { bg = RBIOS8(dac_info + 0x4) & 0xf; dac = RBIOS8(dac_info + 0x5) & 0xf; @@ -782,13 +768,17 @@ struct radeon_encoder_tv_dac *radeon_combios_get_tv_dac_info(struct (bg << 16) | (dac << 20); tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj; tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj; + found = 1; } } else { DRM_INFO("No TV DAC info found in BIOS\n"); - return radeon_legacy_get_tv_dac_info_from_table(rdev); } } +out: + if (!found) /* fallback to defaults */ + radeon_legacy_get_tv_dac_info_from_table(rdev, tv_dac); + return tv_dac; } From 5ef5f72febfea420ce58f670bad83830a5e5e3de Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 17 Aug 2009 13:11:23 +1000 Subject: [PATCH 229/338] drm/kms: teardown crtc correctly when fb is destroyed. If userspace destroys a framebuffer that is in use on a crtc, don't just null it out, tear down the crtc properly so the hw gets turned off. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 40 ++++++++++++-------------------------- 1 file changed, 12 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 33be210d6723..2f631c75f704 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -257,31 +257,6 @@ void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type) } EXPORT_SYMBOL(drm_mode_object_find); -/** - * drm_crtc_from_fb - find the CRTC structure associated with an fb - * @dev: DRM device - * @fb: framebuffer in question - * - * LOCKING: - * Caller must hold mode_config lock. - * - * Find CRTC in the mode_config structure that matches @fb. - * - * RETURNS: - * Pointer to the CRTC or NULL if it wasn't found. - */ -struct drm_crtc *drm_crtc_from_fb(struct drm_device *dev, - struct drm_framebuffer *fb) -{ - struct drm_crtc *crtc; - - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - if (crtc->fb == fb) - return crtc; - } - return NULL; -} - /** * drm_framebuffer_init - initialize a framebuffer * @dev: DRM device @@ -328,11 +303,20 @@ void drm_framebuffer_cleanup(struct drm_framebuffer *fb) { struct drm_device *dev = fb->dev; struct drm_crtc *crtc; + struct drm_mode_set set; + int ret; /* remove from any CRTC */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - if (crtc->fb == fb) - crtc->fb = NULL; + if (crtc->fb == fb) { + /* should turn off the crtc */ + memset(&set, 0, sizeof(struct drm_mode_set)); + set.crtc = crtc; + set.fb = NULL; + ret = crtc->funcs->set_config(&set); + if (ret) + DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc); + } } drm_mode_object_put(dev, &fb->base); @@ -1511,7 +1495,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, set.mode = mode; set.connectors = connector_set; set.num_connectors = crtc_req->count_connectors; - set.fb =fb; + set.fb = fb; ret = crtc->funcs->set_config(&set); out: From 456d8991a795ff5e44dbc1c2a7f8d5b4ed675866 Mon Sep 17 00:00:00 2001 From: Wan ZongShun Date: Tue, 18 Aug 2009 23:34:58 -0700 Subject: [PATCH 230/338] net: Rename MAC platform driver for w90p910 platform Due to I modified the corresponding platform device name, so I make the patch to rename MAC platform driver for w90p910 platform. Signed-off-by: Wan ZongShun Signed-off-by: David S. Miller --- drivers/net/arm/w90p910_ether.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c index 616fb7985a34..ddd231cb54b7 100644 --- a/drivers/net/arm/w90p910_ether.c +++ b/drivers/net/arm/w90p910_ether.c @@ -1080,7 +1080,7 @@ static struct platform_driver w90p910_ether_driver = { .probe = w90p910_ether_probe, .remove = __devexit_p(w90p910_ether_remove), .driver = { - .name = "w90p910-emc", + .name = "nuc900-emc", .owner = THIS_MODULE, }, }; @@ -1101,5 +1101,5 @@ module_exit(w90p910_ether_exit); MODULE_AUTHOR("Wan ZongShun "); MODULE_DESCRIPTION("w90p910 MAC driver!"); MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:w90p910-emc"); +MODULE_ALIAS("platform:nuc900-emc"); From a9919646d12a13bea7eb74b996686f900dffb120 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 18 Aug 2009 23:44:08 -0700 Subject: [PATCH 231/338] sparc32: Kill trap table freeing code. Normally, srmmu uses different trap table register values to allow determination of the cpu we're on. All of the trap tables have identical content, they just sit at different offsets from the first trap table, and the offset shifted down and masked out determines the cpu we are on. The code tries to free them up when they aren't actually used (don't have all 4 cpus, we're on sun4d, etc.) but that causes problems. For one thing it triggers false positives in the DMA debugging code. And fixing that up while preserving this relative offset thing isn't trivial. So just kill the freeing code, it costs us at most 3 pages, big deal... Signed-off-by: David S. Miller --- arch/sparc/kernel/sun4d_smp.c | 22 ---------------------- arch/sparc/kernel/sun4m_smp.c | 26 -------------------------- 2 files changed, 48 deletions(-) diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 54fb02468f0d..68791cad7b74 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -162,9 +162,6 @@ extern void cpu_panic(void); */ extern struct linux_prom_registers smp_penguin_ctable; -extern unsigned long trapbase_cpu1[]; -extern unsigned long trapbase_cpu2[]; -extern unsigned long trapbase_cpu3[]; void __init smp4d_boot_cpus(void) { @@ -235,25 +232,6 @@ void __init smp4d_smp_done(void) *prev = first; local_flush_cache_all(); - /* Free unneeded trap tables */ - ClearPageReserved(virt_to_page(trapbase_cpu1)); - init_page_count(virt_to_page(trapbase_cpu1)); - free_page((unsigned long)trapbase_cpu1); - totalram_pages++; - num_physpages++; - - ClearPageReserved(virt_to_page(trapbase_cpu2)); - init_page_count(virt_to_page(trapbase_cpu2)); - free_page((unsigned long)trapbase_cpu2); - totalram_pages++; - num_physpages++; - - ClearPageReserved(virt_to_page(trapbase_cpu3)); - init_page_count(virt_to_page(trapbase_cpu3)); - free_page((unsigned long)trapbase_cpu3); - totalram_pages++; - num_physpages++; - /* Ok, they are spinning and ready to go. */ smp_processors_ready = 1; sun4d_distribute_irqs(); diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index 960b113d0006..762d6eedd944 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -121,9 +121,6 @@ void __cpuinit smp4m_callin(void) */ extern struct linux_prom_registers smp_penguin_ctable; -extern unsigned long trapbase_cpu1[]; -extern unsigned long trapbase_cpu2[]; -extern unsigned long trapbase_cpu3[]; void __init smp4m_boot_cpus(void) { @@ -193,29 +190,6 @@ void __init smp4m_smp_done(void) *prev = first; local_flush_cache_all(); - /* Free unneeded trap tables */ - if (!cpu_isset(1, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu1)); - init_page_count(virt_to_page(trapbase_cpu1)); - free_page((unsigned long)trapbase_cpu1); - totalram_pages++; - num_physpages++; - } - if (!cpu_isset(2, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu2)); - init_page_count(virt_to_page(trapbase_cpu2)); - free_page((unsigned long)trapbase_cpu2); - totalram_pages++; - num_physpages++; - } - if (!cpu_isset(3, cpu_present_map)) { - ClearPageReserved(virt_to_page(trapbase_cpu3)); - init_page_count(virt_to_page(trapbase_cpu3)); - free_page((unsigned long)trapbase_cpu3); - totalram_pages++; - num_physpages++; - } - /* Ok, they are spinning and ready to go. */ } From 2193aa276e2579d9c781c5269521d43f47da9959 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 18 Aug 2009 23:46:12 -0700 Subject: [PATCH 232/338] sparc32: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc32_defconfig | 74 +++++++++++++++++----------- 1 file changed, 44 insertions(+), 30 deletions(-) diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 8bcd27af724b..a0f62a808edb 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Fri Apr 17 04:04:46 2009 +# Linux kernel version: 2.6.31-rc1 +# Tue Aug 18 23:45:52 2009 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -17,6 +17,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -74,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -87,8 +87,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Performance Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -97,6 +102,10 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -109,7 +118,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,9 +163,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set CONFIG_SERIAL_CONSOLE=y @@ -264,6 +273,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -281,7 +291,11 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -335,6 +349,7 @@ CONFIG_MISC_DEVICES=y # EEPROM support # # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -358,10 +373,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -379,6 +390,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -387,6 +399,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -401,7 +414,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -426,13 +438,16 @@ CONFIG_SCSI_SUNESP=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -463,6 +478,7 @@ CONFIG_SUNQE=m # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -482,6 +498,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -629,6 +646,11 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -668,22 +690,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -776,6 +783,10 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -799,10 +810,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -985,6 +998,7 @@ CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y CONFIG_KGDB_TESTS=y # CONFIG_KGDB_TESTS_ON_BOOT is not set +# CONFIG_KMEMCHECK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_STACK_DEBUG is not set From 1ca3976d8ca8b0b44145994b1433f759a642615b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 18 Aug 2009 23:56:21 -0700 Subject: [PATCH 233/338] sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc64_defconfig | 59 ++++++++++++++++------------ 1 file changed, 34 insertions(+), 25 deletions(-) diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index 0123a4c596ce..fdddf7a6f725 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Tue Jun 16 04:59:36 2009 +# Linux kernel version: 2.6.31-rc1 +# Tue Aug 18 23:56:02 2009 # CONFIG_64BIT=y CONFIG_SPARC=y @@ -26,6 +26,7 @@ CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -119,6 +120,11 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -204,7 +210,6 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_DEFAULT_MMAP_MIN_ADDR=8192 @@ -410,6 +415,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y @@ -562,6 +568,7 @@ CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set CONFIG_DM_ZERO=m # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set @@ -573,7 +580,11 @@ CONFIG_DM_ZERO=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -667,6 +678,7 @@ CONFIG_E1000E=m # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -773,6 +785,7 @@ CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -870,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -898,13 +912,17 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -959,6 +977,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -994,23 +1013,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -1284,7 +1289,6 @@ CONFIG_USB=y # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -1296,6 +1300,7 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set @@ -1374,7 +1379,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1420,6 +1424,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1448,6 +1453,10 @@ CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1480,11 +1489,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1560,7 +1569,7 @@ CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SUN_PARTITION=y -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set From 150fe14c1a1f08cb430d8382bf5554c2a168b79b Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 19 Aug 2009 16:58:59 +0800 Subject: [PATCH 234/338] ALSA: hda: enable speaker output for Compaq 6530s/6531s HP Compaq 6530s and 6531s internal speaker is silence or becomes silence within 1 minute after fresh boot. It is found that pin 0x1c must be set to PIN_OUT mode to make the speaker work. This is weird - line-in pin 0x1c and speaker pin 0x16 seem to be unrelated. The codec differences before/after patch are: @@ Node 0x17 [Pin Complex] wcaps 0x40020b: Pin Default 0x41a6e130: [N/A] Mic at Ext Rear Conn = Digital, Color = White DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x24: IN + Pin-ctls: 0x40: OUT @@ Node 0x1c [Pin Complex] wcaps 0x40018d: Pin Default 0x41813021: [N/A] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x1 - Pin-ctls: 0x24: IN VREF_80 + Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x24 Tests show that it won't impact (external) Mic recording. Reported-by: "Lin, Ming M" Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index e8e6a43865c2..f2bb48034170 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3823,9 +3823,11 @@ static struct hda_verb ad1884a_laptop_verbs[] = { /* Port-F (int speaker) mixer - route only from analog mixer */ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - /* Port-F pin */ - {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* Port-F (int speaker) pin */ + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* required for compaq 6530s/6531s speaker output */ + {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Port-C pin - internal mic-in */ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ From ae709440edb2d36f51f5ea51cfab931f45c03e02 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 19 Aug 2009 17:05:11 +0800 Subject: [PATCH 235/338] ALSA: hda: add model for Intel DG45ID/DG45FC boards The BIOS pin configs are in fact correct and shall not be overwritten. Signed-off-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 456ef6ac12e4..6990cfcb6a38 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -76,6 +76,7 @@ enum { STAC_92HD73XX_AUTO, STAC_92HD73XX_NO_JD, /* no jack-detection */ STAC_92HD73XX_REF, + STAC_92HD73XX_INTEL, STAC_DELL_M6_AMIC, STAC_DELL_M6_DMIC, STAC_DELL_M6_BOTH, @@ -1777,6 +1778,7 @@ static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = { [STAC_92HD73XX_AUTO] = "auto", [STAC_92HD73XX_NO_JD] = "no-jd", [STAC_92HD73XX_REF] = "ref", + [STAC_92HD73XX_INTEL] = "intel", [STAC_DELL_M6_AMIC] = "dell-m6-amic", [STAC_DELL_M6_DMIC] = "dell-m6-dmic", [STAC_DELL_M6_BOTH] = "dell-m6", @@ -1789,6 +1791,10 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "DFI LanParty", STAC_92HD73XX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_92HD73XX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5002, + "Intel DG45ID", STAC_92HD73XX_INTEL), + SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x5003, + "Intel DG45FC", STAC_92HD73XX_INTEL), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254, "Dell Studio 1535", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255, From f833bab87fca5c3ce13778421b1365845843b976 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 17 Aug 2009 14:34:59 -0700 Subject: [PATCH 236/338] clockevent: Prevent dead lock on clockevents_lock Currently clockevents_notify() is called with interrupts enabled at some places and interrupts disabled at some other places. This results in a deadlock in this scenario. cpu A holds clockevents_lock in clockevents_notify() with irqs enabled cpu B waits for clockevents_lock in clockevents_notify() with irqs disabled cpu C doing set_mtrr() which will try to rendezvous of all the cpus. This will result in C and A come to the rendezvous point and waiting for B. B is stuck forever waiting for the spinlock and thus not reaching the rendezvous point. Fix the clockevents code so that clockevents_lock is taken with interrupts disabled and thus avoid the above deadlock. Also call lapic_timer_propagate_broadcast() on the destination cpu so that we avoid calling smp_call_function() in the clockevents notifier chain. This issue left us wondering if we need to change the MTRR rendezvous logic to use stop machine logic (instead of smp_call_function) or add a check in spinlock debug code to see if there are other spinlocks which gets taken under both interrupts enabled/disabled conditions. Signed-off-by: Suresh Siddha Signed-off-by: Venkatesh Pallipadi Cc: "Pallipadi Venkatesh" Cc: "Brown Len" LKML-Reference: <1250544899.2709.210.camel@sbs-t61.sc.intel.com> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process.c | 6 +----- drivers/acpi/processor_idle.c | 6 ++++-- kernel/time/clockevents.c | 16 ++++++++++------ kernel/time/tick-broadcast.c | 7 +++---- 4 files changed, 18 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 994dd6a4a2a0..071166a4ba83 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -519,16 +519,12 @@ static void c1e_idle(void) if (!cpumask_test_cpu(cpu, c1e_mask)) { cpumask_set_cpu(cpu, c1e_mask); /* - * Force broadcast so ACPI can not interfere. Needs - * to run with interrupts enabled as it uses - * smp_function_call. + * Force broadcast so ACPI can not interfere. */ - local_irq_enable(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &cpu); printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", cpu); - local_irq_disable(); } clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0efa59e7e3af..66393d5c4c7c 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -162,8 +162,9 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr, pr->power.timer_broadcast_on_state = state; } -static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) +static void lapic_timer_propagate_broadcast(void *arg) { + struct acpi_processor *pr = (struct acpi_processor *) arg; unsigned long reason; reason = pr->power.timer_broadcast_on_state < INT_MAX ? @@ -635,7 +636,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) working++; } - lapic_timer_propagate_broadcast(pr); + smp_call_function_single(pr->id, lapic_timer_propagate_broadcast, + pr, 1); return (working); } diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index a6dcd67b041d..620b58abdc32 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -137,11 +137,12 @@ int clockevents_program_event(struct clock_event_device *dev, ktime_t expires, */ int clockevents_register_notifier(struct notifier_block *nb) { + unsigned long flags; int ret; - spin_lock(&clockevents_lock); + spin_lock_irqsave(&clockevents_lock, flags); ret = raw_notifier_chain_register(&clockevents_chain, nb); - spin_unlock(&clockevents_lock); + spin_unlock_irqrestore(&clockevents_lock, flags); return ret; } @@ -178,16 +179,18 @@ static void clockevents_notify_released(void) */ void clockevents_register_device(struct clock_event_device *dev) { + unsigned long flags; + BUG_ON(dev->mode != CLOCK_EVT_MODE_UNUSED); BUG_ON(!dev->cpumask); - spin_lock(&clockevents_lock); + spin_lock_irqsave(&clockevents_lock, flags); list_add(&dev->list, &clockevent_devices); clockevents_do_notify(CLOCK_EVT_NOTIFY_ADD, dev); clockevents_notify_released(); - spin_unlock(&clockevents_lock); + spin_unlock_irqrestore(&clockevents_lock, flags); } EXPORT_SYMBOL_GPL(clockevents_register_device); @@ -235,8 +238,9 @@ void clockevents_exchange_device(struct clock_event_device *old, void clockevents_notify(unsigned long reason, void *arg) { struct list_head *node, *tmp; + unsigned long flags; - spin_lock(&clockevents_lock); + spin_lock_irqsave(&clockevents_lock, flags); clockevents_do_notify(reason, arg); switch (reason) { @@ -251,7 +255,7 @@ void clockevents_notify(unsigned long reason, void *arg) default: break; } - spin_unlock(&clockevents_lock); + spin_unlock_irqrestore(&clockevents_lock, flags); } EXPORT_SYMBOL_GPL(clockevents_notify); #endif diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 877dbedc3118..c2ec25087a35 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -205,11 +205,11 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) * Powerstate information: The system enters/leaves a state, where * affected devices might stop */ -static void tick_do_broadcast_on_off(void *why) +static void tick_do_broadcast_on_off(unsigned long *reason) { struct clock_event_device *bc, *dev; struct tick_device *td; - unsigned long flags, *reason = why; + unsigned long flags; int cpu, bc_stopped; spin_lock_irqsave(&tick_broadcast_lock, flags); @@ -276,8 +276,7 @@ void tick_broadcast_on_off(unsigned long reason, int *oncpu) printk(KERN_ERR "tick-broadcast: ignoring broadcast for " "offline CPU #%d\n", *oncpu); else - smp_call_function_single(*oncpu, tick_do_broadcast_on_off, - &reason, 1); + tick_do_broadcast_on_off(&reason); } /* From 0dc9aa845c20ed1f46c85f229591b811dffc4b3b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 19 Aug 2009 16:10:16 +0100 Subject: [PATCH 237/338] AFS: Documentation updates Fix some issues with the AFS documentation, found when testing AFS on ppc64: - Update AFS features: reading/writing, local caching - Typo in kafs sysfs debug file - Use modprobe instead of insmod in example - Update IPs for grand.central.org Signed-off-by: Anton Blanchard Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- Documentation/filesystems/afs.txt | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/Documentation/filesystems/afs.txt b/Documentation/filesystems/afs.txt index 12ad6c7f4e50..ffef91c4e0d6 100644 --- a/Documentation/filesystems/afs.txt +++ b/Documentation/filesystems/afs.txt @@ -23,16 +23,14 @@ it does support include: (*) Security (currently only AFS kaserver and KerberosIV tickets). - (*) File reading. + (*) File reading and writing. (*) Automounting. + (*) Local caching (via fscache). + It does not yet support the following AFS features: - (*) Write support. - - (*) Local caching. - (*) pioctl() system call. @@ -56,7 +54,7 @@ They permit the debugging messages to be turned on dynamically by manipulating the masks in the following files: /sys/module/af_rxrpc/parameters/debug - /sys/module/afs/parameters/debug + /sys/module/kafs/parameters/debug ===== @@ -66,9 +64,9 @@ USAGE When inserting the driver modules the root cell must be specified along with a list of volume location server IP addresses: - insmod af_rxrpc.o - insmod rxkad.o - insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 + modprobe af_rxrpc + modprobe rxkad + modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 The first module is the AF_RXRPC network protocol driver. This provides the RxRPC remote operation protocol and may also be accessed from userspace. See: @@ -81,7 +79,7 @@ is the actual filesystem driver for the AFS filesystem. Once the module has been loaded, more modules can be added by the following procedure: - echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells Where the parameters to the "add" command are the name of a cell and a list of volume location servers within that cell, with the latter separated by colons. @@ -101,7 +99,7 @@ The name of the volume can be suffixes with ".backup" or ".readonly" to specify connection to only volumes of those types. The name of the cell is optional, and if not given during a mount, then the -named volume will be looked up in the cell specified during insmod. +named volume will be looked up in the cell specified during modprobe. Additional cells can be added through /proc (see later section). @@ -163,14 +161,14 @@ THE CELL DATABASE The filesystem maintains an internal database of all the cells it knows and the IP addresses of the volume location servers for those cells. The cell to which -the system belongs is added to the database when insmod is performed by the +the system belongs is added to the database when modprobe is performed by the "rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on the kernel command line. Further cells can be added by commands similar to the following: echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells - echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells No other cell database operations are available at this time. @@ -233,7 +231,7 @@ insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91 mount -t afs \%root.afs. /afs mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/ -echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells +echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/ mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib From 3abf2f3639959e4f53f209f93cd4d93fe9356de1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 19 Aug 2009 20:05:02 +0200 Subject: [PATCH 238/338] ALSA: hda - Fix probe of Toshiba laptops with ALC268 codec There are many variants of Toshiba laptops with ALC268 codec, and it seems that a few of them don't work with model=toshiba preset since they have the secondary ALC268 codec just for HDMI output. This is a regression due to the previous clean-up work to merge all Toshiba quirk entries into a single check. This patch adds the identification of such laptops to apply the standard BIOS-probing method. Unfortunately, Toshiba laptops have all the same PCI SSID, so we need to check the codec SSID to identify each device. Tested-by: Alexey Dobriyan Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index fea976793ae5..6f683e451f2b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12521,8 +12521,6 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { ALC268_TOSHIBA), SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), - SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05", - ALC268_TOSHIBA), SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), @@ -12530,6 +12528,15 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { {} }; +/* Toshiba laptops have no unique PCI SSID but only codec SSID */ +static struct snd_pci_quirk alc268_ssid_cfg_tbl[] = { + SND_PCI_QUIRK(0x1179, 0xff0a, "TOSHIBA X-200", ALC268_AUTO), + SND_PCI_QUIRK(0x1179, 0xff0e, "TOSHIBA X-200 HDMI", ALC268_AUTO), + SND_PCI_QUIRK_MASK(0x1179, 0xff00, 0xff00, "TOSHIBA A/Lx05", + ALC268_TOSHIBA), + {} +}; + static struct alc_config_preset alc268_presets[] = { [ALC267_QUANTA_IL1] = { .mixers = { alc267_quanta_il1_mixer, alc268_beep_mixer }, @@ -12696,6 +12703,10 @@ static int patch_alc268(struct hda_codec *codec) alc268_models, alc268_cfg_tbl); + if (board_config < 0 || board_config >= ALC268_MODEL_LAST) + board_config = snd_hda_check_board_codec_sid_config(codec, + ALC882_MODEL_LAST, alc268_models, alc268_ssid_cfg_tbl); + if (board_config < 0 || board_config >= ALC268_MODEL_LAST) { printk(KERN_INFO "hda_codec: Unknown model for %s, " "trying auto-probe from BIOS...\n", codec->chip_name); From cbb35f8a2858f7e0fff5df598cb286c4bcae5976 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 19 Aug 2009 12:13:31 -0700 Subject: [PATCH 239/338] net: fix ks8851 build errors Fix build errors due to missing Kconfig select of CRC32: ks8851.c:(.text+0x7d2ee): undefined reference to `crc32_le' ks8851.c:(.text+0x7d2f5): undefined reference to `bitrev32' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5f6509a5f640..7a90e7ce5a9c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1733,6 +1733,7 @@ config KS8851 tristate "Micrel KS8851 SPI" depends on SPI select MII + select CRC32 help SPI driver for Micrel KS8851 SPI attached network chip. From 5416c2663517ebd0be0664c4d4ce3df0b116c059 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 17 Aug 2009 12:25:41 -0700 Subject: [PATCH 240/338] x86: make sure load_percpu_segment has no stackprotector load_percpu_segment() is used to set up the per-cpu segment registers, which are also used for -fstack-protector. Make sure that the load_percpu_segment() function doesn't have stackprotector enabled. [ Impact: allow percpu setup before calling stack-protected functions ] Signed-off-by: Jeremy Fitzhardinge --- arch/x86/kernel/cpu/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 4e242f9a06e4..8b5b9b625ede 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -7,6 +7,10 @@ ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_common.o = -pg endif +# Make sure load_percpu_segment has no stackprotector +nostackp := $(call cc-option, -fno-stack-protector) +CFLAGS_common.o := $(nostackp) + obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o capflags.o powerflags.o common.o obj-y += vmware.o hypervisor.o From ce2eef33d35cd7b932492b5a81fb0febd2b323cd Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 17 Aug 2009 12:26:53 -0700 Subject: [PATCH 241/338] xen: rearrange things to fix stackprotector Make sure the stack-protector segment registers are properly set up before calling any functions which may have stack-protection compiled into them. [ Impact: prevent Xen early-boot crash when stack-protector is enabled ] Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/Makefile | 4 ++++ arch/x86/xen/enlighten.c | 22 ++++++++++------------ 2 files changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3b767d03fd6a..a5b9288b7da4 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -5,6 +5,10 @@ CFLAGS_REMOVE_time.o = -pg CFLAGS_REMOVE_irq.o = -pg endif +# Make sure early boot has no stackprotector +nostackp := $(call cc-option, -fno-stack-protector) +CFLAGS_enlighten.o := $(nostackp) + obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ grant-table.o suspend.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f09e8c36ee80..edcf72a3c29c 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -925,10 +925,6 @@ asmlinkage void __init xen_start_kernel(void) xen_domain_type = XEN_PV_DOMAIN; - BUG_ON(memcmp(xen_start_info->magic, "xen-3", 5) != 0); - - xen_setup_features(); - /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; @@ -937,8 +933,15 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; - xen_init_irq_ops(); +#ifdef CONFIG_X86_64 + /* + * Setup percpu state. We only need to do this for 64-bit + * because 32-bit already has %fs set properly. + */ + load_percpu_segment(0); +#endif + xen_init_irq_ops(); xen_init_cpuid_mask(); #ifdef CONFIG_X86_LOCAL_APIC @@ -948,6 +951,8 @@ asmlinkage void __init xen_start_kernel(void) set_xen_basic_apic_ops(); #endif + xen_setup_features(); + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; @@ -955,13 +960,6 @@ asmlinkage void __init xen_start_kernel(void) machine_ops = xen_machine_ops; -#ifdef CONFIG_X86_64 - /* - * Setup percpu state. We only need to do this for 64-bit - * because 32-bit already has %fs set properly. - */ - load_percpu_segment(0); -#endif /* * The only reliable way to retain the initial address of the * percpu gdt_page is to remember it here, so we can go and From 68947b8f9a36f7f7f54ca95e0c6e169bb603e803 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Wed, 19 Aug 2009 22:07:44 -0700 Subject: [PATCH 242/338] Input: iforce - support new revision of ACT LABS Force RS Reported-by: cemede@gmail.com Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-main.c | 1 + drivers/input/joystick/iforce/iforce-usb.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index baabf8302645..f6c688cae334 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -74,6 +74,7 @@ static struct iforce_device iforce_device[] = { { 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_avb_wheel, abs_wheel, ff_iforce }, { 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_avb_tw, abs_wheel, ff_iforce }, //? { 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //? + { 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, { 0x06f8, 0x0001, "Guillemot Race Leader Force Feedback", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0004, "Guillemot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //? { 0x06f8, 0x0004, "Gullemot Jet Leader 3D", btn_joystick, abs_joystick, ff_iforce }, //? diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index f83185aeb511..9f289d8f52c6 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -223,6 +223,7 @@ static struct usb_device_id iforce_usb_ids [] = { { USB_DEVICE(0x05ef, 0x8884) }, /* AVB Mag Turbo Force */ { USB_DEVICE(0x05ef, 0x8888) }, /* AVB Top Shot FFB Racing Wheel */ { USB_DEVICE(0x061c, 0xc0a4) }, /* ACT LABS Force RS */ + { USB_DEVICE(0x061c, 0xc084) }, /* ACT LABS Force RS */ { USB_DEVICE(0x06f8, 0x0001) }, /* Guillemot Race Leader Force Feedback */ { USB_DEVICE(0x06f8, 0x0004) }, /* Guillemot Force Feedback Racing Wheel */ { USB_DEVICE(0x06f8, 0xa302) }, /* Guillemot Jet Leader 3D */ From d3b325f9c25be6d504bc73afce7f92d0e25001d7 Mon Sep 17 00:00:00 2001 From: Petri Gynther Date: Thu, 20 Aug 2009 02:21:27 -0700 Subject: [PATCH 243/338] ibm_newemac: emac_close() needs to call netif_carrier_off() When ibm_newemac netdev instance is shutdown with "ifconfig down", the netdev interface does not go properly down. netif_carrier_ok() keeps returning TRUE even after "ifconfig down". The problem can be seen when ibm_newemac instances are slaves of a bonding interface. The bonding interface code uses netif_carrier_ok() to determine the link status of its slaves. When ibm_newemac slave is shutdown with "ifconfig down", the bonding interface won't detect any link status change because netif_carrier_ok() keeps returning TRUE. Signed-off-by: Petri Gynther Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index beb84213b671..f0f890803710 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1305,6 +1305,8 @@ static int emac_close(struct net_device *ndev) free_irq(dev->emac_irq, dev); + netif_carrier_off(ndev); + return 0; } From c82f63e411f1b58427c103bd95af2863b1c96dd1 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Sat, 8 Aug 2009 08:46:19 +0800 Subject: [PATCH 244/338] PCI: check saved state before restore Without the check, the config space may be filled with zeros. Though the driver should try to avoid call restoring before saving, but the pci layer also should check this. Also removes the existing check in pci_restore_standard_config, since it's superfluous with the new check in restore_state. Acked-by: Rafael J. Wysocki Signed-off-by: Alek Du Signed-off-by: Jesse Barnes --- drivers/pci/pci-driver.c | 2 +- drivers/pci/pci.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index d76c4c85367e..f99bc7f089f1 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -508,7 +508,7 @@ static int pci_restore_standard_config(struct pci_dev *pci_dev) return error; } - return pci_dev->state_saved ? pci_restore_state(pci_dev) : 0; + return pci_restore_state(pci_dev); } static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index dbd0f947f497..7b70312181d7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -846,6 +846,8 @@ pci_restore_state(struct pci_dev *dev) int i; u32 val; + if (!dev->state_saved) + return 0; /* PCI Express register must be restored first */ pci_restore_pcie_state(dev); From dcc4ec26942d3bae2c5a82ab8346ab53b540a171 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 20 Aug 2009 11:21:14 -0500 Subject: [PATCH 245/338] i2c-omap: Fix I2C status ACK I2C status ack for [RX]RDR and [RX]RDY could cause race conditions of clearing the event twice and a violation of the programing sequence as defined in TRM This patch fixes the same. Signed-off-by: Nishanth Menon Signed-off-by: Moiz Sonasath Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d258b02aef44..94639d0aabd5 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -674,7 +674,14 @@ omap_i2c_isr(int this_irq, void *dev_id) err = 0; complete: - omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); + /* + * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be + * acked after the data operation is complete. + * Ref: TRM SWPU114Q Figure 18-31 + */ + omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat & + ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); if (stat & OMAP_I2C_STAT_NACK) { err |= OMAP_I2C_STAT_NACK; From dd11976aea15bde53ce40b076dd5fa462c74f41a Mon Sep 17 00:00:00 2001 From: Moiz Sonasath Date: Thu, 20 Aug 2009 11:21:15 -0500 Subject: [PATCH 246/338] i2c-omap: ACK pending [R/X]DR and [R/X]RDY interrupts ACK any pending read/write interrupts before exiting the ISR either after completing the operation [ARDY interrupt] or in case of an error [NACK|AL interrupt] Signed-off-by: Moiz Sonasath Signed-off-by: Vikram Pandita Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 94639d0aabd5..16b39f470a7c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -694,6 +694,9 @@ complete: } if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { + omap_i2c_ack_stat(dev, stat & + (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | + OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); omap_i2c_complete_cmd(dev, err); return IRQ_HANDLED; } From 61149787d65b4a2f9c638d363dc65e13cb063e29 Mon Sep 17 00:00:00 2001 From: Moiz Sonasath Date: Thu, 20 Aug 2009 11:21:16 -0500 Subject: [PATCH 247/338] i2c-omap: Enable workaround for Errata 1.153 based on Silicon Errata 1.153 has been fixed on OMAP 3630|4430 with the use of a later version of I2C IP block. The errata impacts OMAP 2420|2430|3430, enable the workaround for these based on I2C IP block revision number instead of OMAP CPU type Signed-off-by: Moiz Sonasath Signed-off-by: Vikram Pandita Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 16b39f470a7c..827da0858136 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -784,7 +784,7 @@ complete: * memory to the I2C interface. */ - if (cpu_is_omap34xx()) { + if (dev->rev <= OMAP_I2C_REV_ON_3430) { while (!(stat & OMAP_I2C_STAT_XUDF)) { if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); From c37faafa7d46622b749437f7d294201a63af4beb Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 13 Aug 2009 22:14:23 +0200 Subject: [PATCH 248/338] i2c-stu300: I2C STU300 stability updates - blk clk is enabled when an irq arrives. The clk should be enabled, but just to make sure. - All error bits are handled no matter state machine state - All irq's will run complete() except for irq's that wasn't an event. - No more looking into status registers just in case an interrupt has happend and the irq handle wasn't executed. - irq_disable/enable are now separete functions. - clk settings calculation changed to round upwards instead of downwards. - Number of address send attempts before giving up is increased to 12 from 10 since it most times take 8 tries before getting through. Signed-off-by: Linus Walleij Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-stu300.c | 155 +++++++++++++++++++------------- 1 file changed, 91 insertions(+), 64 deletions(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index 182e711318ba..d2728a28a8db 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -117,7 +117,8 @@ enum stu300_error { STU300_ERROR_NONE = 0, STU300_ERROR_ACKNOWLEDGE_FAILURE, STU300_ERROR_BUS_ERROR, - STU300_ERROR_ARBITRATION_LOST + STU300_ERROR_ARBITRATION_LOST, + STU300_ERROR_UNKNOWN }; /* timeout waiting for the controller to respond */ @@ -127,7 +128,7 @@ enum stu300_error { * The number of address send athemps tried before giving up. * If the first one failes it seems like 5 to 8 attempts are required. */ -#define NUM_ADDR_RESEND_ATTEMPTS 10 +#define NUM_ADDR_RESEND_ATTEMPTS 12 /* I2C clock speed, in Hz 0-400kHz*/ static unsigned int scl_frequency = 100000; @@ -149,6 +150,7 @@ module_param(scl_frequency, uint, 0644); * @msg_index: index of current message * @msg_len: length of current message */ + struct stu300_dev { struct platform_device *pdev; struct i2c_adapter adapter; @@ -188,6 +190,27 @@ static inline u32 stu300_r8(void __iomem *address) return readl(address) & 0x000000FFU; } +static void stu300_irq_enable(struct stu300_dev *dev) +{ + u32 val; + val = stu300_r8(dev->virtbase + I2C_CR); + val |= I2C_CR_INTERRUPT_ENABLE; + /* Twice paranoia (possible HW glitch) */ + stu300_wr8(val, dev->virtbase + I2C_CR); + stu300_wr8(val, dev->virtbase + I2C_CR); +} + +static void stu300_irq_disable(struct stu300_dev *dev) +{ + u32 val; + val = stu300_r8(dev->virtbase + I2C_CR); + val &= ~I2C_CR_INTERRUPT_ENABLE; + /* Twice paranoia (possible HW glitch) */ + stu300_wr8(val, dev->virtbase + I2C_CR); + stu300_wr8(val, dev->virtbase + I2C_CR); +} + + /* * Tells whether a certain event or events occurred in * response to a command. The events represent states in @@ -196,9 +219,10 @@ static inline u32 stu300_r8(void __iomem *address) * documentation and can only be treated as abstract state * machine states. * - * @ret 0 = event has not occurred, any other value means - * the event occurred. + * @ret 0 = event has not occurred or unknown error, any + * other value means the correct event occurred or an error. */ + static int stu300_event_occurred(struct stu300_dev *dev, enum stu300_event mr_event) { u32 status1; @@ -206,11 +230,28 @@ static int stu300_event_occurred(struct stu300_dev *dev, /* What event happened? */ status1 = stu300_r8(dev->virtbase + I2C_SR1); + if (!(status1 & I2C_SR1_EVF_IND)) /* No event at all */ return 0; + status2 = stu300_r8(dev->virtbase + I2C_SR2); + /* Block any multiple interrupts */ + stu300_irq_disable(dev); + + /* Check for errors first */ + if (status2 & I2C_SR2_AF_IND) { + dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE; + return 1; + } else if (status2 & I2C_SR2_BERR_IND) { + dev->cmd_err = STU300_ERROR_BUS_ERROR; + return 1; + } else if (status2 & I2C_SR2_ARLO_IND) { + dev->cmd_err = STU300_ERROR_ARBITRATION_LOST; + return 1; + } + switch (mr_event) { case STU300_EVENT_1: if (status1 & I2C_SR1_ADSL_IND) @@ -221,10 +262,6 @@ static int stu300_event_occurred(struct stu300_dev *dev, case STU300_EVENT_7: case STU300_EVENT_8: if (status1 & I2C_SR1_BTF_IND) { - if (status2 & I2C_SR2_AF_IND) - dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE; - else if (status2 & I2C_SR2_BERR_IND) - dev->cmd_err = STU300_ERROR_BUS_ERROR; return 1; } break; @@ -240,8 +277,6 @@ static int stu300_event_occurred(struct stu300_dev *dev, case STU300_EVENT_6: if (status2 & I2C_SR2_ENDAD_IND) { /* First check for any errors */ - if (status2 & I2C_SR2_AF_IND) - dev->cmd_err = STU300_ERROR_ACKNOWLEDGE_FAILURE; return 1; } break; @@ -252,8 +287,15 @@ static int stu300_event_occurred(struct stu300_dev *dev, default: break; } - if (status2 & I2C_SR2_ARLO_IND) - dev->cmd_err = STU300_ERROR_ARBITRATION_LOST; + /* If we get here, we're on thin ice. + * Here we are in a status where we have + * gotten a response that does not match + * what we requested. + */ + dev->cmd_err = STU300_ERROR_UNKNOWN; + dev_err(&dev->pdev->dev, + "Unhandled interrupt! %d sr1: 0x%x sr2: 0x%x\n", + mr_event, status1, status2); return 0; } @@ -262,21 +304,20 @@ static irqreturn_t stu300_irh(int irq, void *data) struct stu300_dev *dev = data; int res; + /* Just make sure that the block is clocked */ + clk_enable(dev->clk); + /* See if this was what we were waiting for */ spin_lock(&dev->cmd_issue_lock); - if (dev->cmd_event != STU300_EVENT_NONE) { - res = stu300_event_occurred(dev, dev->cmd_event); - if (res || dev->cmd_err != STU300_ERROR_NONE) { - u32 val; - complete(&dev->cmd_complete); - /* Block any multiple interrupts */ - val = stu300_r8(dev->virtbase + I2C_CR); - val &= ~I2C_CR_INTERRUPT_ENABLE; - stu300_wr8(val, dev->virtbase + I2C_CR); - } - } + res = stu300_event_occurred(dev, dev->cmd_event); + if (res || dev->cmd_err != STU300_ERROR_NONE) + complete(&dev->cmd_complete); + spin_unlock(&dev->cmd_issue_lock); + + clk_disable(dev->clk); + return IRQ_HANDLED; } @@ -308,7 +349,6 @@ static int stu300_start_and_await_event(struct stu300_dev *dev, stu300_wr8(cr_value, dev->virtbase + I2C_CR); ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, STU300_TIMEOUT); - if (ret < 0) { dev_err(&dev->pdev->dev, "wait_for_completion_interruptible_timeout() " @@ -342,7 +382,6 @@ static int stu300_await_event(struct stu300_dev *dev, enum stu300_event mr_event) { int ret; - u32 val; if (unlikely(irqs_disabled())) { /* TODO: implement polling for this case if need be. */ @@ -354,36 +393,18 @@ static int stu300_await_event(struct stu300_dev *dev, /* Is it already here? */ spin_lock_irq(&dev->cmd_issue_lock); dev->cmd_err = STU300_ERROR_NONE; - if (stu300_event_occurred(dev, mr_event)) { - spin_unlock_irq(&dev->cmd_issue_lock); - goto exit_await_check_err; - } - init_completion(&dev->cmd_complete); - dev->cmd_err = STU300_ERROR_NONE; dev->cmd_event = mr_event; + init_completion(&dev->cmd_complete); + /* Turn on the I2C interrupt for current operation */ - val = stu300_r8(dev->virtbase + I2C_CR); - val |= I2C_CR_INTERRUPT_ENABLE; - stu300_wr8(val, dev->virtbase + I2C_CR); - - /* Twice paranoia (possible HW glitch) */ - stu300_wr8(val, dev->virtbase + I2C_CR); - - /* Check again: is it already here? */ - if (unlikely(stu300_event_occurred(dev, mr_event))) { - /* Disable IRQ again. */ - val &= ~I2C_CR_INTERRUPT_ENABLE; - stu300_wr8(val, dev->virtbase + I2C_CR); - spin_unlock_irq(&dev->cmd_issue_lock); - goto exit_await_check_err; - } + stu300_irq_enable(dev); /* Unlock the command block and wait for the event to occur */ spin_unlock_irq(&dev->cmd_issue_lock); + ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, STU300_TIMEOUT); - if (ret < 0) { dev_err(&dev->pdev->dev, "wait_for_completion_interruptible_timeout()" @@ -401,7 +422,6 @@ static int stu300_await_event(struct stu300_dev *dev, return -ETIMEDOUT; } - exit_await_check_err: if (dev->cmd_err != STU300_ERROR_NONE) { if (mr_event != STU300_EVENT_6) { dev_err(&dev->pdev->dev, "controller " @@ -457,18 +477,19 @@ struct stu300_clkset { }; static const struct stu300_clkset stu300_clktable[] = { - { 0, 0xFFU }, - { 2500000, I2C_OAR2_FR_25_10MHZ }, - { 10000000, I2C_OAR2_FR_10_1667MHZ }, - { 16670000, I2C_OAR2_FR_1667_2667MHZ }, - { 26670000, I2C_OAR2_FR_2667_40MHZ }, - { 40000000, I2C_OAR2_FR_40_5333MHZ }, - { 53330000, I2C_OAR2_FR_5333_66MHZ }, - { 66000000, I2C_OAR2_FR_66_80MHZ }, - { 80000000, I2C_OAR2_FR_80_100MHZ }, + { 0, 0xFFU }, + { 2500000, I2C_OAR2_FR_25_10MHZ }, + { 10000000, I2C_OAR2_FR_10_1667MHZ }, + { 16670000, I2C_OAR2_FR_1667_2667MHZ }, + { 26670000, I2C_OAR2_FR_2667_40MHZ }, + { 40000000, I2C_OAR2_FR_40_5333MHZ }, + { 53330000, I2C_OAR2_FR_5333_66MHZ }, + { 66000000, I2C_OAR2_FR_66_80MHZ }, + { 80000000, I2C_OAR2_FR_80_100MHZ }, { 100000000, 0xFFU }, }; + static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) { @@ -494,10 +515,10 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate) if (dev->speed > 100000) /* Fast Mode I2C */ - val = ((clkrate/dev->speed)-9)/3; + val = ((clkrate/dev->speed) - 9)/3 + 1; else /* Standard Mode I2C */ - val = ((clkrate/dev->speed)-7)/2; + val = ((clkrate/dev->speed) - 7)/2 + 1; /* According to spec the divider must be > 2 */ if (val < 0x002) { @@ -557,6 +578,7 @@ static int stu300_init_hw(struct stu300_dev *dev) */ clkrate = clk_get_rate(dev->clk); ret = stu300_set_clk(dev, clkrate); + if (ret) return ret; /* @@ -641,7 +663,6 @@ static int stu300_xfer_msg(struct i2c_adapter *adap, int attempts = 0; struct stu300_dev *dev = i2c_get_adapdata(adap); - clk_enable(dev->clk); /* Remove this if (0) to trace each and every message. */ @@ -715,14 +736,15 @@ static int stu300_xfer_msg(struct i2c_adapter *adap, if (attempts < NUM_ADDR_RESEND_ATTEMPTS && attempts > 0) { dev_dbg(&dev->pdev->dev, "managed to get address " - "through after %d attempts\n", attempts); + "through after %d attempts\n", attempts); } else if (attempts == NUM_ADDR_RESEND_ATTEMPTS) { dev_dbg(&dev->pdev->dev, "I give up, tried %d times " - "to resend address.\n", - NUM_ADDR_RESEND_ATTEMPTS); + "to resend address.\n", + NUM_ADDR_RESEND_ATTEMPTS); goto exit_disable; } + if (msg->flags & I2C_M_RD) { /* READ: we read the actual bytes one at a time */ for (i = 0; i < msg->len; i++) { @@ -804,8 +826,10 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, { int ret = -1; int i; + struct stu300_dev *dev = i2c_get_adapdata(adap); dev->msg_len = num; + for (i = 0; i < num; i++) { /* * Another driver appears to send stop for each message, @@ -817,6 +841,7 @@ static int stu300_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, dev->msg_index = i; ret = stu300_xfer_msg(adap, &msgs[i], (i == (num - 1))); + if (ret != 0) { num = ret; break; @@ -845,6 +870,7 @@ stu300_probe(struct platform_device *pdev) struct resource *res; int bus_nr; int ret = 0; + char clk_name[] = "I2C0"; dev = kzalloc(sizeof(struct stu300_dev), GFP_KERNEL); if (!dev) { @@ -854,7 +880,8 @@ stu300_probe(struct platform_device *pdev) } bus_nr = pdev->id; - dev->clk = clk_get(&pdev->dev, NULL); + clk_name[3] += (char)bus_nr; + dev->clk = clk_get(&pdev->dev, clk_name); if (IS_ERR(dev->clk)) { ret = PTR_ERR(dev->clk); dev_err(&pdev->dev, "could not retrieve i2c bus clock\n"); From fc0ce23506d943b9eaa731a051769d0e0605eb03 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 20 Aug 2009 16:14:15 +0100 Subject: [PATCH 249/338] x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile The absence of vmlinux.lds here keeps .vmlinux.lds.cmd from being included, which in turn leads to it and all its dependents always getting rebuilt independent of whether they are already up-to-date. Signed-off-by: Jan Beulich LKML-Reference: <4A8D84670200007800010D31@vpn.id2.novell.com> Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index e2ff504b4ddc..f8ed0658404c 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -4,7 +4,7 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma head_$(BITS).o misc.o piggy.o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -fno-strict-aliasing -fPIC From a8b88d3d49623ac701b5dc996cbd61219c793c7c Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 20 Aug 2009 18:26:52 +0200 Subject: [PATCH 250/338] ocfs2: Add missing lock name There is missing name for NFSSync cluster lock. This makes lockdep unhappy because we end up passing NULL to lockdep when initializing lock key. Fix it. Signed-off-by: Jan Kara Signed-off-by: Joel Becker --- fs/ocfs2/ocfs2_lockid.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ocfs2/ocfs2_lockid.h b/fs/ocfs2/ocfs2_lockid.h index fcdba091af3d..c212cf5a2bdf 100644 --- a/fs/ocfs2/ocfs2_lockid.h +++ b/fs/ocfs2/ocfs2_lockid.h @@ -108,6 +108,7 @@ static char *ocfs2_lock_type_strings[] = { [OCFS2_LOCK_TYPE_OPEN] = "Open", [OCFS2_LOCK_TYPE_FLOCK] = "Flock", [OCFS2_LOCK_TYPE_QINFO] = "Quota", + [OCFS2_LOCK_TYPE_NFS_SYNC] = "NFSSync", [OCFS2_LOCK_TYPE_ORPHAN_SCAN] = "OrphanScan", }; From e3b2415e281a97ade36d88404094a90cfea838c0 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 21 Aug 2009 09:47:45 +1000 Subject: [PATCH 251/338] drm/radeon/kms: implement the bo busy ioctl properly. The previous patch assumes the ioctl already existed, when it actually didn't. It also didn't return the correct error code. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_gem.c | 2 +- drivers/gpu/drm/radeon/radeon_kms.c | 1 + include/drm/radeon_drm.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index d4ceff13bbb1..14c199802920 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -283,7 +283,7 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); - return 0; + return r; } int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index d2764bf6b2a2..11ed672543b1 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -318,5 +318,6 @@ struct drm_ioctl_desc radeon_ioctls_kms[] = { DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH), DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH), DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH), + DRM_IOCTL_DEF(DRM_RADEON_GEM_BUSY, radeon_gem_busy_ioctl, DRM_AUTH), }; int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms); diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index f81c3232accd..b43925586b29 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -508,6 +508,7 @@ typedef struct { #define DRM_RADEON_INFO 0x27 #define DRM_RADEON_GEM_SET_TILING 0x28 #define DRM_RADEON_GEM_GET_TILING 0x29 +#define DRM_RADEON_GEM_BUSY 0x2a #define DRM_IOCTL_RADEON_CP_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t) #define DRM_IOCTL_RADEON_CP_START DRM_IO( DRM_COMMAND_BASE + DRM_RADEON_CP_START) @@ -548,6 +549,7 @@ typedef struct { #define DRM_IOCTL_RADEON_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info) #define DRM_IOCTL_RADEON_SET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling) #define DRM_IOCTL_RADEON_GET_TILING DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling) +#define DRM_IOCTL_RADEON_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_BUSY, struct drm_radeon_gem_busy) typedef struct drm_radeon_init { enum { From 08e4d534743f4e9af3602aebbc1cca9372762028 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Thu, 20 Aug 2009 19:02:31 +1000 Subject: [PATCH 252/338] drm: Fix sysfs device confusion. The drm sysfs class suspend / resume methods could not distinguish between different device types wich could lead to illegal type casts. Use struct device_type and make sure the class suspend / resume callbacks are aware of those. There is no per device-type suspend / resume. Only new-style PM. Signed-off-by: Thomas Hellstrom Reviewed-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 47 +++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 85ec31b3ff00..f7a615b80c70 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -22,44 +22,50 @@ #define to_drm_minor(d) container_of(d, struct drm_minor, kdev) #define to_drm_connector(d) container_of(d, struct drm_connector, kdev) +static struct device_type drm_sysfs_device_minor = { + .name = "drm_minor" +}; + /** - * drm_sysfs_suspend - DRM class suspend hook + * drm_class_suspend - DRM class suspend hook * @dev: Linux device to suspend * @state: power state to enter * * Just figures out what the actual struct drm_device associated with * @dev is and calls its suspend hook, if present. */ -static int drm_sysfs_suspend(struct device *dev, pm_message_t state) +static int drm_class_suspend(struct device *dev, pm_message_t state) { - struct drm_minor *drm_minor = to_drm_minor(dev); - struct drm_device *drm_dev = drm_minor->dev; - - if (drm_minor->type == DRM_MINOR_LEGACY && - !drm_core_check_feature(drm_dev, DRIVER_MODESET) && - drm_dev->driver->suspend) - return drm_dev->driver->suspend(drm_dev, state); + if (dev->type == &drm_sysfs_device_minor) { + struct drm_minor *drm_minor = to_drm_minor(dev); + struct drm_device *drm_dev = drm_minor->dev; + if (drm_minor->type == DRM_MINOR_LEGACY && + !drm_core_check_feature(drm_dev, DRIVER_MODESET) && + drm_dev->driver->suspend) + return drm_dev->driver->suspend(drm_dev, state); + } return 0; } /** - * drm_sysfs_resume - DRM class resume hook + * drm_class_resume - DRM class resume hook * @dev: Linux device to resume * * Just figures out what the actual struct drm_device associated with * @dev is and calls its resume hook, if present. */ -static int drm_sysfs_resume(struct device *dev) +static int drm_class_resume(struct device *dev) { - struct drm_minor *drm_minor = to_drm_minor(dev); - struct drm_device *drm_dev = drm_minor->dev; - - if (drm_minor->type == DRM_MINOR_LEGACY && - !drm_core_check_feature(drm_dev, DRIVER_MODESET) && - drm_dev->driver->resume) - return drm_dev->driver->resume(drm_dev); + if (dev->type == &drm_sysfs_device_minor) { + struct drm_minor *drm_minor = to_drm_minor(dev); + struct drm_device *drm_dev = drm_minor->dev; + if (drm_minor->type == DRM_MINOR_LEGACY && + !drm_core_check_feature(drm_dev, DRIVER_MODESET) && + drm_dev->driver->resume) + return drm_dev->driver->resume(drm_dev); + } return 0; } @@ -99,8 +105,8 @@ struct class *drm_sysfs_create(struct module *owner, char *name) goto err_out; } - class->suspend = drm_sysfs_suspend; - class->resume = drm_sysfs_resume; + class->suspend = drm_class_suspend; + class->resume = drm_class_resume; err = class_create_file(class, &class_attr_version); if (err) @@ -480,6 +486,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) minor->kdev.class = drm_class; minor->kdev.release = drm_sysfs_device_release; minor->kdev.devt = minor->device; + minor->kdev.type = &drm_sysfs_device_minor; if (minor->type == DRM_MINOR_CONTROL) minor_str = "controlD%d"; else if (minor->type == DRM_MINOR_RENDER) From 17782d99502851dc7e48114ee9c5a6d6741cba18 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 21 Aug 2009 10:07:54 +1000 Subject: [PATCH 253/338] drm/radeon/kms: add r100/r200 OQ support. This adds the relocation necessary for OQ support on the r100/r200 chipsets. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 10 ++++++++++ drivers/gpu/drm/radeon/radeon_reg.h | 3 +++ 2 files changed, 13 insertions(+) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 90ff8e0ac04e..68e728e8be4d 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1091,6 +1091,16 @@ static int r100_packet0_check(struct radeon_cs_parser *p, tmp |= tile_flags; ib[idx] = tmp; break; + case RADEON_RB3D_ZPASS_ADDR: + r = r100_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("No reloc for ib[%d]=0x%04X\n", + idx, reg); + r100_cs_dump_packet(p, pkt); + return r; + } + ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset); + break; default: /* FIXME: we don't want to allow anyothers packet */ break; diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index 5a098f304edb..5834497b366d 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -2337,6 +2337,9 @@ # define RADEON_RE_WIDTH_SHIFT 0 # define RADEON_RE_HEIGHT_SHIFT 16 +#define RADEON_RB3D_ZPASS_DATA 0x3290 +#define RADEON_RB3D_ZPASS_ADDR 0x3294 + #define RADEON_SE_CNTL 0x1c4c # define RADEON_FFACE_CULL_CW (0 << 0) # define RADEON_FFACE_CULL_CCW (1 << 0) From c795b33ba171e41563ab7e25105c0cd4edd81cd7 Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Thu, 20 Aug 2009 13:43:19 -0500 Subject: [PATCH 254/338] ocfs2/dlm: Wait on lockres instead of erroring cancel requests In case a downconvert is queued, and a flock receives a signal, BUG_ON(lockres->l_action != OCFS2_AST_INVALID) is triggered because a lock cancel triggers a dlmunlock while an AST is scheduled. To avoid this, allow a LKM_CANCEL to pass through, and let it wait on __dlm_wait_on_lockres(). Signed-off-by: Goldwyn Rodrigues Acked-off-by: Mark Fasheh Signed-off-by: Joel Becker --- fs/ocfs2/dlm/dlmunlock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c index fcf879ed6930..756f5b0998e0 100644 --- a/fs/ocfs2/dlm/dlmunlock.c +++ b/fs/ocfs2/dlm/dlmunlock.c @@ -122,7 +122,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm, * that still has AST's pending... */ in_use = !list_empty(&lock->ast_list); spin_unlock(&dlm->ast_lock); - if (in_use) { + if (in_use && !(flags & LKM_CANCEL)) { mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock " "while waiting for an ast!", res->lockname.len, res->lockname.name); @@ -131,7 +131,7 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm, spin_lock(&res->spinlock); if (res->state & DLM_LOCK_RES_IN_PROGRESS) { - if (master_node) { + if (master_node && !(flags & LKM_CANCEL)) { mlog(ML_ERROR, "lockres in progress!\n"); spin_unlock(&res->spinlock); return DLM_FORWARD; From 3b7307c2d66dd575ef24b88898b4bc4bddb254f4 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 20 Aug 2009 21:41:04 -0700 Subject: [PATCH 255/338] Input: wacom - don't use on-stack memory for report buffers Tested-by: Martin Capitanio Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_sys.c | 43 +++++++++++++++++++++----------- 1 file changed, 29 insertions(+), 14 deletions(-) diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index a9d5031b855e..ea30c983a33e 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -388,6 +388,32 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi return result; } +static int wacom_query_tablet_data(struct usb_interface *intf) +{ + unsigned char *rep_data; + int limit = 0; + int error; + + rep_data = kmalloc(2, GFP_KERNEL); + if (!rep_data) + return -ENOMEM; + + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + + kfree(rep_data); + + return error < 0 ? error : 0; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); @@ -398,7 +424,6 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; - char rep_data[2], limit = 0; struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); @@ -489,20 +514,10 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i /* * Ask the tablet to report tablet data if it is not a Tablet PC. - * Repeat until it succeeds + * Note that if query fails it is not a hard failure. */ - if (wacom_wac->features->type != TABLETPC) { - do { - rep_data[0] = 2; - rep_data[1] = 2; - error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, - 2, rep_data, 2); - if (error >= 0) - error = usb_get_report(intf, - WAC_HID_FEATURE_REPORT, 2, - rep_data, 2); - } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); - } + if (wacom_wac->features->type != TABLETPC) + wacom_query_tablet_data(intf); usb_set_intfdata(intf, wacom); return 0; From 1700f5fde88f9a251037bc86bde538ee32c59905 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 20 Aug 2009 22:05:53 -0700 Subject: [PATCH 256/338] Input: ucb1400_ts - enable ADC Filter This patch enables ADC filtering on UCB1400 codec by default. The benefit from this change is mostly on some Colibri boards where the ADCSYNC pin of the UCB1400 codec isn't connected causing the touchscreen to jitter very badly. This change has no visible effect on boards where the ADCSYNC pin is connected. Signed-off-by: Marek Vasut Tested-by: Palo Revak Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 9 +++++++++ include/linux/ucb1400.h | 4 ++++ 2 files changed, 13 insertions(+) diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 6954f5500108..3b345f9cf0c7 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -345,6 +345,7 @@ static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb) static int ucb1400_ts_probe(struct platform_device *dev) { int error, x_res, y_res; + u16 fcsr; struct ucb1400_ts *ucb = dev->dev.platform_data; ucb->ts_idev = input_allocate_device(); @@ -382,6 +383,14 @@ static int ucb1400_ts_probe(struct platform_device *dev) ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + /* + * Enable ADC filter to prevent horrible jitter on Colibri. + * This also further reduces jitter on boards where ADCSYNC + * pin is connected. + */ + fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR); + ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE); + ucb1400_adc_enable(ucb->ac97); x_res = ucb1400_ts_read_xres(ucb); y_res = ucb1400_ts_read_yres(ucb); diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h index ed889f4168f3..ae779bb8cc0f 100644 --- a/include/linux/ucb1400.h +++ b/include/linux/ucb1400.h @@ -73,6 +73,10 @@ #define UCB_ADC_DATA 0x68 #define UCB_ADC_DAT_VALID (1 << 15) + +#define UCB_FCSR 0x6c +#define UCB_FCSR_AVE (1 << 12) + #define UCB_ADC_DAT_MASK 0x3ff #define UCB_ID 0x7e From 9b2fb2da4edfb163842800abbeb4c14bc1759469 Mon Sep 17 00:00:00 2001 From: Pavel Revak Date: Thu, 20 Aug 2009 22:30:54 -0700 Subject: [PATCH 257/338] Input: ucb1400_ts - enable interrupt unconditionally Sometimes, when using the touchscreen, it stops working till next restart and the following message is printed: ucb1400: unexpected IE_STATUS = 0x0 The following patch retriggers the touchscreen interrupt unconditionally. This prevents hanging of the touchscreen in case of bogus interrupt occurence. Signed-off-by: Pavel Revak Acked-by: Marek Vasut Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 3b345f9cf0c7..3a7a58222f83 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -170,11 +170,11 @@ static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb) ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr); ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0); - if (isr & UCB_IE_TSPX) { + if (isr & UCB_IE_TSPX) ucb1400_ts_irq_disable(ucb->ac97); - enable_irq(ucb->irq); - } else - printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr); + else + dev_dbg(&ucb->ts_idev->dev, "ucb1400: unexpected IE_STATUS = %#x\n", isr); + enable_irq(ucb->irq); } static int ucb1400_ts_thread(void *_ucb) From ec9c96ef3cc0124cb94375b17faaa8cff5dfdf97 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Wed, 19 Aug 2009 21:17:08 -0400 Subject: [PATCH 258/338] dma-debug: Fix check_unmap null pointer dereference While it's debatable whether or not a NULL device argument to the DMA API functions is valid... since it certainly isn't valid on devices with an IOMMU... dma-debug really shouldn't be dereferencing null pointers either. Guard against that in err_printk and the driver_filter functions. A Fedora rawhide user was seeing this in one of the dvb drivers resulting in an oops on boot. [ A patch has been sent for testing to the driver, but I feel the dma debugging support should be fixed as well. (There's still a pile of legacy garbage in the kernel passing null pointers to dma_{alloc,free}_*. :( ] Signed-off-by: Kyle McMartin Cc: mchehab@infradead.org Cc: Joerg Roedel LKML-Reference: <20090820011708.GP25206@bombadil.infradead.org> Signed-off-by: Ingo Molnar --- lib/dma-debug.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 65b0d99b6d0a..58a9f9fc609a 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -156,9 +156,13 @@ static bool driver_filter(struct device *dev) return true; /* driver filter on and initialized */ - if (current_driver && dev->driver == current_driver) + if (current_driver && dev && dev->driver == current_driver) return true; + /* driver filter on, but we can't filter on a NULL device... */ + if (!dev) + return false; + if (current_driver || !current_driver_name[0]) return false; @@ -183,17 +187,17 @@ static bool driver_filter(struct device *dev) return ret; } -#define err_printk(dev, entry, format, arg...) do { \ - error_count += 1; \ - if (driver_filter(dev) && \ - (show_all_errors || show_num_errors > 0)) { \ - WARN(1, "%s %s: " format, \ - dev_driver_string(dev), \ - dev_name(dev) , ## arg); \ - dump_entry_trace(entry); \ - } \ - if (!show_all_errors && show_num_errors > 0) \ - show_num_errors -= 1; \ +#define err_printk(dev, entry, format, arg...) do { \ + error_count += 1; \ + if (driver_filter(dev) && \ + (show_all_errors || show_num_errors > 0)) { \ + WARN(1, "%s %s: " format, \ + dev ? dev_driver_string(dev) : "NULL", \ + dev ? dev_name(dev) : "NULL", ## arg); \ + dump_entry_trace(entry); \ + } \ + if (!show_all_errors && show_num_errors > 0) \ + show_num_errors -= 1; \ } while (0); /* From 03e860bd9f6a3cca747b0795bed26279a8b420a0 Mon Sep 17 00:00:00 2001 From: "From: Nick Piggin" Date: Fri, 21 Aug 2009 10:09:44 +0200 Subject: [PATCH 259/338] btrfs: fix inode rbtree corruption Node may not be inserted over existing node. This causes inode tree corruption and I was seeing crashes in inode_tree_del which I can not reproduce after this patch. The other way to fix this would be to tie inode lifetime in the rbtree with inode while not in freeing state. I had a look at this but it is not so trivial at this point. At least this patch gets things working again. Signed-off-by: Nick Piggin Cc: Chris Mason Acked-by: Yan Zheng Signed-off-by: Jens Axboe --- fs/btrfs/inode.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 272b9b2bea86..59cba180fe83 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3099,8 +3099,12 @@ static void inode_tree_add(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_inode *entry; - struct rb_node **p = &root->inode_tree.rb_node; - struct rb_node *parent = NULL; + struct rb_node **p; + struct rb_node *parent; + +again: + p = &root->inode_tree.rb_node; + parent = NULL; spin_lock(&root->inode_lock); while (*p) { @@ -3108,13 +3112,16 @@ static void inode_tree_add(struct inode *inode) entry = rb_entry(parent, struct btrfs_inode, rb_node); if (inode->i_ino < entry->vfs_inode.i_ino) - p = &(*p)->rb_left; + p = &parent->rb_left; else if (inode->i_ino > entry->vfs_inode.i_ino) - p = &(*p)->rb_right; + p = &parent->rb_right; else { WARN_ON(!(entry->vfs_inode.i_state & (I_WILL_FREE | I_FREEING | I_CLEAR))); - break; + rb_erase(parent, &root->inode_tree); + RB_CLEAR_NODE(parent); + spin_unlock(&root->inode_lock); + goto again; } } rb_link_node(&BTRFS_I(inode)->rb_node, parent, p); @@ -3126,12 +3133,12 @@ static void inode_tree_del(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; + spin_lock(&root->inode_lock); if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) { - spin_lock(&root->inode_lock); rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree); - spin_unlock(&root->inode_lock); RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node); } + spin_unlock(&root->inode_lock); } static noinline void init_btrfs_i(struct inode *inode) From f779b3e513478218cbaaaa0a506d7801cab6fd14 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Aug 2009 19:11:39 -0400 Subject: [PATCH 260/338] drm/radeon: add GET_PARAM/INFO support for Z pipes Needed for occlusion queries on rv530 chips. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r300.c | 4 +++- drivers/gpu/drm/radeon/r420.c | 13 ++++++++++++- drivers/gpu/drm/radeon/r520.c | 1 - drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_cp.c | 9 +++++++++ drivers/gpu/drm/radeon/radeon_drv.h | 5 ++++- drivers/gpu/drm/radeon/radeon_kms.c | 3 +++ drivers/gpu/drm/radeon/radeon_reg.h | 2 ++ drivers/gpu/drm/radeon/radeon_state.c | 3 +++ include/drm/radeon_drm.h | 2 ++ 10 files changed, 39 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index c47579dcafa1..053f4ec397f7 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -448,6 +448,7 @@ void r300_gpu_init(struct radeon_device *rdev) /* rv350,rv370,rv380 */ rdev->num_gb_pipes = 1; } + rdev->num_z_pipes = 1; gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16); switch (rdev->num_gb_pipes) { case 2: @@ -486,7 +487,8 @@ void r300_gpu_init(struct radeon_device *rdev) printk(KERN_WARNING "Failed to wait MC idle while " "programming pipes. Bad things might happen.\n"); } - DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes); + DRM_INFO("radeon: %d quad pipes, %d Z pipes initialized.\n", + rdev->num_gb_pipes, rdev->num_z_pipes); } int r300_ga_reset(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index dea497a979f2..97426a6f370f 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -165,7 +165,18 @@ void r420_pipes_init(struct radeon_device *rdev) printk(KERN_WARNING "Failed to wait GUI idle while " "programming pipes. Bad things might happen.\n"); } - DRM_INFO("radeon: %d pipes initialized.\n", rdev->num_gb_pipes); + + if (rdev->family == CHIP_RV530) { + tmp = RREG32(RV530_GB_PIPE_SELECT2); + if ((tmp & 3) == 3) + rdev->num_z_pipes = 2; + else + rdev->num_z_pipes = 1; + } else + rdev->num_z_pipes = 1; + + DRM_INFO("radeon: %d quad pipes, %d z pipes initialized.\n", + rdev->num_gb_pipes, rdev->num_z_pipes); } void r420_gpu_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index 09fb0b6ec7dd..ebd6b0f7bdff 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -177,7 +177,6 @@ void r520_gpu_init(struct radeon_device *rdev) */ /* workaround for RV530 */ if (rdev->family == CHIP_RV530) { - WREG32(0x4124, 1); WREG32(0x4128, 0xFF); } r420_pipes_init(rdev); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 79ad98264e33..b519fb2fecbb 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -655,6 +655,7 @@ struct radeon_device { int usec_timeout; enum radeon_pll_errata pll_errata; int num_gb_pipes; + int num_z_pipes; int disp_priority; /* BIOS */ uint8_t *bios; diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index d8356827ef17..7a52c461145c 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -406,6 +406,15 @@ static void radeon_init_pipes(drm_radeon_private_t *dev_priv) { uint32_t gb_tile_config, gb_pipe_sel = 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) { + uint32_t z_pipe_sel = RADEON_READ(RV530_GB_PIPE_SELECT2); + if ((z_pipe_sel & 3) == 3) + dev_priv->num_z_pipes = 2; + else + dev_priv->num_z_pipes = 1; + } else + dev_priv->num_z_pipes = 1; + /* RS4xx/RS6xx/R4xx/R5xx */ if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) { gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT); diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 3933f8216a34..6fa32dac4e97 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -100,9 +100,10 @@ * 1.28- Add support for VBL on CRTC2 * 1.29- R500 3D cmd buffer support * 1.30- Add support for occlusion queries + * 1.31- Add support for num Z pipes from GET_PARAM */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 30 +#define DRIVER_MINOR 31 #define DRIVER_PATCHLEVEL 0 /* @@ -329,6 +330,7 @@ typedef struct drm_radeon_private { resource_size_t fb_aper_offset; int num_gb_pipes; + int num_z_pipes; int track_flush; drm_local_map_t *mmio; @@ -689,6 +691,7 @@ extern void r600_page_table_cleanup(struct drm_device *dev, struct drm_ati_pciga /* pipe config regs */ #define R400_GB_PIPE_SELECT 0x402c +#define RV530_GB_PIPE_SELECT2 0x4124 #define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */ #define R300_GB_TILE_CONFIG 0x4018 # define R300_ENABLE_TILING (1 << 0) diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 11ed672543b1..dce09ada32bc 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -95,6 +95,9 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) case RADEON_INFO_NUM_GB_PIPES: value = rdev->num_gb_pipes; break; + case RADEON_INFO_NUM_Z_PIPES: + value = rdev->num_z_pipes; + break; default: DRM_DEBUG("Invalid request %d\n", info->request); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index 5834497b366d..4df43f62c678 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -3574,4 +3574,6 @@ #define RADEON_SCRATCH_REG4 0x15f0 #define RADEON_SCRATCH_REG5 0x15f4 +#define RV530_GB_PIPE_SELECT2 0x4124 + #endif diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 46645f3e0328..2882f40d5ec5 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -3081,6 +3081,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil case RADEON_PARAM_NUM_GB_PIPES: value = dev_priv->num_gb_pipes; break; + case RADEON_PARAM_NUM_Z_PIPES: + value = dev_priv->num_z_pipes; + break; default: DRM_DEBUG("Invalid parameter %d\n", param->param); return -EINVAL; diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index b43925586b29..2ba61e18fc8b 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -709,6 +709,7 @@ typedef struct drm_radeon_indirect { #define RADEON_PARAM_FB_LOCATION 14 /* FB location */ #define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */ #define RADEON_PARAM_DEVICE_ID 16 +#define RADEON_PARAM_NUM_Z_PIPES 17 /* num Z pipes */ typedef struct drm_radeon_getparam { int param; @@ -897,6 +898,7 @@ struct drm_radeon_cs { #define RADEON_INFO_DEVICE_ID 0x00 #define RADEON_INFO_NUM_GB_PIPES 0x01 +#define RADEON_INFO_NUM_Z_PIPES 0x02 struct drm_radeon_info { uint32_t request; From 4a683bf94b8a10e2bb0da07aec3ac0a55e5de61f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 21 Aug 2009 12:53:36 +0200 Subject: [PATCH 261/338] tracing: Fix too large stack usage in do_one_initcall() One of my testboxes triggered this nasty stack overflow crash during SCSI probing: [ 5.874004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.875004] device: 'sda': device_add [ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c [ 5.878004] IP: [] print_context_stack+0x81/0x110 [ 5.878004] *pde = 00000000 [ 5.878004] Thread overran stack, or stack corrupted [ 5.878004] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 5.878004] last sysfs file: [ 5.878004] [ 5.878004] Pid: 1, comm: swapper Not tainted (2.6.31-rc6-tip-01272-g9919e28-dirty #5685) [ 5.878004] EIP: 0060:[] EFLAGS: 00010083 CPU: 0 [ 5.878004] EIP is at print_context_stack+0x81/0x110 [ 5.878004] EAX: cf8a3000 EBX: cf8a3fe4 ECX: 00000049 EDX: 00000000 [ 5.878004] ESI: b1cfce84 EDI: 00000000 EBP: cf8a3018 ESP: cf8a2ff4 [ 5.878004] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 5.878004] Process swapper (pid: 1, ti=cf8a2000 task=cf8a8000 task.ti=cf8a3000) [ 5.878004] Stack: [ 5.878004] b1004867 fffff000 cf8a3ffc [ 5.878004] Call Trace: [ 5.878004] [] ? kernel_thread_helper+0x7/0x10 [ 5.878004] BUG: unable to handle kernel NULL pointer dereference at 00000a0c [ 5.878004] IP: [] print_context_stack+0x81/0x110 [ 5.878004] *pde = 00000000 [ 5.878004] Thread overran stack, or stack corrupted [ 5.878004] Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC The oops did not reveal any more details about the real stack that we have and the system got into an infinite loop of recursive pagefaults. So i booted with CONFIG_STACK_TRACER=y and the 'stacktrace' boot parameter. The box did not crash (timings/conditions probably changed a tiny bit to trigger the catastrophic crash), but the /debug/tracing/stack_trace file was rather revealing: Depth Size Location (72 entries) ----- ---- -------- 0) 3704 52 __change_page_attr+0xb8/0x290 1) 3652 24 __change_page_attr_set_clr+0x43/0x90 2) 3628 60 kernel_map_pages+0x108/0x120 3) 3568 40 prep_new_page+0x7d/0x130 4) 3528 84 get_page_from_freelist+0x106/0x420 5) 3444 116 __alloc_pages_nodemask+0xd7/0x550 6) 3328 36 allocate_slab+0xb1/0x100 7) 3292 36 new_slab+0x1c/0x160 8) 3256 36 __slab_alloc+0x133/0x2b0 9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0 10) 3216 108 create_object+0x28/0x250 11) 3108 40 kmemleak_alloc+0x81/0xc0 12) 3068 24 kmem_cache_alloc+0x162/0x1d0 13) 3044 52 scsi_pool_alloc_command+0x29/0x70 14) 2992 20 scsi_host_alloc_command+0x22/0x70 15) 2972 24 __scsi_get_command+0x1b/0x90 16) 2948 28 scsi_get_command+0x35/0x90 17) 2920 24 scsi_setup_blk_pc_cmnd+0xd4/0x100 18) 2896 128 sd_prep_fn+0x332/0xa70 19) 2768 36 blk_peek_request+0xe7/0x1d0 20) 2732 56 scsi_request_fn+0x54/0x520 21) 2676 12 __generic_unplug_device+0x2b/0x40 22) 2664 24 blk_execute_rq_nowait+0x59/0x80 23) 2640 172 blk_execute_rq+0x6b/0xb0 24) 2468 32 scsi_execute+0xe0/0x140 25) 2436 64 scsi_execute_req+0x152/0x160 26) 2372 60 scsi_vpd_inquiry+0x6c/0x90 27) 2312 44 scsi_get_vpd_page+0x112/0x160 28) 2268 52 sd_revalidate_disk+0x1df/0x320 29) 2216 92 rescan_partitions+0x98/0x330 30) 2124 52 __blkdev_get+0x309/0x350 31) 2072 8 blkdev_get+0xf/0x20 32) 2064 44 register_disk+0xff/0x120 33) 2020 36 add_disk+0x6e/0xb0 34) 1984 44 sd_probe_async+0xfb/0x1d0 35) 1940 44 __async_schedule+0xf4/0x1b0 36) 1896 8 async_schedule+0x12/0x20 37) 1888 60 sd_probe+0x305/0x360 38) 1828 44 really_probe+0x63/0x170 39) 1784 36 driver_probe_device+0x5d/0x60 40) 1748 16 __device_attach+0x49/0x50 41) 1732 32 bus_for_each_drv+0x5b/0x80 42) 1700 24 device_attach+0x6b/0x70 43) 1676 16 bus_attach_device+0x47/0x60 44) 1660 76 device_add+0x33d/0x400 45) 1584 52 scsi_sysfs_add_sdev+0x6a/0x2c0 46) 1532 108 scsi_add_lun+0x44b/0x460 47) 1424 116 scsi_probe_and_add_lun+0x182/0x4e0 48) 1308 36 __scsi_add_device+0xd9/0xe0 49) 1272 44 ata_scsi_scan_host+0x10b/0x190 50) 1228 24 async_port_probe+0x96/0xd0 51) 1204 44 __async_schedule+0xf4/0x1b0 52) 1160 8 async_schedule+0x12/0x20 53) 1152 48 ata_host_register+0x171/0x1d0 54) 1104 60 ata_pci_sff_activate_host+0xf3/0x230 55) 1044 44 ata_pci_sff_init_one+0xea/0x100 56) 1000 48 amd_init_one+0xb2/0x190 57) 952 8 local_pci_probe+0x13/0x20 58) 944 32 pci_device_probe+0x68/0x90 59) 912 44 really_probe+0x63/0x170 60) 868 36 driver_probe_device+0x5d/0x60 61) 832 20 __driver_attach+0x89/0xa0 62) 812 32 bus_for_each_dev+0x5b/0x80 63) 780 12 driver_attach+0x1e/0x20 64) 768 72 bus_add_driver+0x14b/0x2d0 65) 696 36 driver_register+0x6e/0x150 66) 660 20 __pci_register_driver+0x53/0xc0 67) 640 8 amd_init+0x14/0x16 68) 632 572 do_one_initcall+0x2b/0x1d0 69) 60 12 do_basic_setup+0x56/0x6a 70) 48 20 kernel_init+0x84/0xce 71) 28 28 kernel_thread_helper+0x7/0x10 There's a lot of fat functions on that stack trace, but the largest of all is do_one_initcall(). This is due to the boot trace entry variables being on the stack. Fixing this is relatively easy, initcalls are fundamentally serialized, so we can move the local variables to file scope. Note that this large stack footprint was present for a couple of months already - what pushed my system over the edge was the addition of kmemleak to the call-chain: 6) 3328 36 allocate_slab+0xb1/0x100 7) 3292 36 new_slab+0x1c/0x160 8) 3256 36 __slab_alloc+0x133/0x2b0 9) 3220 4 kmem_cache_alloc+0x1bb/0x1d0 10) 3216 108 create_object+0x28/0x250 11) 3108 40 kmemleak_alloc+0x81/0xc0 12) 3068 24 kmem_cache_alloc+0x162/0x1d0 13) 3044 52 scsi_pool_alloc_command+0x29/0x70 This pushes the total to ~3800 bytes, only a tiny bit more was needed to corrupt the on-kernel-stack thread_info. The fix reduces the stack footprint from 572 bytes to 28 bytes. Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: Steven Rostedt Cc: Catalin Marinas Cc: Jens Axboe Cc: Linus Torvalds Cc: LKML-Reference: Signed-off-by: Ingo Molnar --- init/main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/init/main.c b/init/main.c index 2c5ade79eb81..98e679e3494a 100644 --- a/init/main.c +++ b/init/main.c @@ -733,13 +733,14 @@ static void __init do_ctors(void) int initcall_debug; core_param(initcall_debug, initcall_debug, bool, 0644); +static char msgbuf[64]; +static struct boot_trace_call call; +static struct boot_trace_ret ret; + int do_one_initcall(initcall_t fn) { int count = preempt_count(); ktime_t calltime, delta, rettime; - char msgbuf[64]; - struct boot_trace_call call; - struct boot_trace_ret ret; if (initcall_debug) { call.caller = task_pid_nr(current); From 83d349f35e1ae72268c5104dbf9ab2ae635425d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Aug 2009 09:23:57 -0700 Subject: [PATCH 262/338] x86: don't send an IPI to the empty set of CPU's MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The default_send_IPI_mask_logical() function uses the "flat" APIC mode to send an IPI to a set of CPU's at once, but if that set happens to be empty, some older local APIC's will apparently be rather unhappy. So just warn if a caller gives us an empty mask, and ignore it. This fixes a regression in 2.6.30.x, due to commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), documented here: http://bugzilla.kernel.org/show_bug.cgi?id=13933 which causes a silent lock-up. It only seems to happen on PPro, P2, P3 and Athlon XP cores. Most developers sadly (or not so sadly, if you're a developer..) have more modern CPU's. Also, on x86-64 we don't use the flat APIC mode, so it would never trigger there even if the APIC didn't like sending an empty IPI mask. Reported-by: Pavel Vilim Reported-and-tested-by: Thomas Björnell Reported-and-tested-by: Martin Rogge Cc: Mike Travis Cc: Ingo Molnar Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/kernel/apic/ipi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c index dbf5445727a9..6ef00ba4c886 100644 --- a/arch/x86/kernel/apic/ipi.c +++ b/arch/x86/kernel/apic/ipi.c @@ -106,6 +106,9 @@ void default_send_IPI_mask_logical(const struct cpumask *cpumask, int vector) unsigned long mask = cpumask_bits(cpumask)[0]; unsigned long flags; + if (WARN_ONCE(!mask, "empty IPI mask")) + return; + local_irq_save(flags); WARN_ON(mask & ~cpumask_bits(cpu_online_mask)[0]); __default_send_IPI_dest_field(mask, vector, apic->dest_logical); From f4b0373b26567cafd421d91101852ed7a34e9e94 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Aug 2009 09:26:15 -0700 Subject: [PATCH 263/338] Make bitmask 'and' operators return a result code When 'and'ing two bitmasks (where 'andnot' is a variation on it), some cases want to know whether the result is the empty set or not. In particular, the TLB IPI sending code wants to do cpumask operations and determine if there are any CPU's left in the final set. So this just makes the bitmask (and cpumask) functions return a boolean for whether the result has any bits set. Cc: stable@kernel.org (2.6.30, needed by TLB shootdown fix) Signed-off-by: Linus Torvalds --- include/linux/bitmap.h | 18 ++++++++---------- include/linux/cpumask.h | 20 ++++++++++---------- lib/bitmap.c | 12 ++++++++---- 3 files changed, 26 insertions(+), 24 deletions(-) diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index 2878811c6134..756d78b8c1c5 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -94,13 +94,13 @@ extern void __bitmap_shift_right(unsigned long *dst, const unsigned long *src, int shift, int bits); extern void __bitmap_shift_left(unsigned long *dst, const unsigned long *src, int shift, int bits); -extern void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1, +extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits); extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits); extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits); -extern void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1, +extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits); extern int __bitmap_intersects(const unsigned long *bitmap1, const unsigned long *bitmap2, int bits); @@ -171,13 +171,12 @@ static inline void bitmap_copy(unsigned long *dst, const unsigned long *src, } } -static inline void bitmap_and(unsigned long *dst, const unsigned long *src1, +static inline int bitmap_and(unsigned long *dst, const unsigned long *src1, const unsigned long *src2, int nbits) { if (small_const_nbits(nbits)) - *dst = *src1 & *src2; - else - __bitmap_and(dst, src1, src2, nbits); + return (*dst = *src1 & *src2) != 0; + return __bitmap_and(dst, src1, src2, nbits); } static inline void bitmap_or(unsigned long *dst, const unsigned long *src1, @@ -198,13 +197,12 @@ static inline void bitmap_xor(unsigned long *dst, const unsigned long *src1, __bitmap_xor(dst, src1, src2, nbits); } -static inline void bitmap_andnot(unsigned long *dst, const unsigned long *src1, +static inline int bitmap_andnot(unsigned long *dst, const unsigned long *src1, const unsigned long *src2, int nbits) { if (small_const_nbits(nbits)) - *dst = *src1 & ~(*src2); - else - __bitmap_andnot(dst, src1, src2, nbits); + return (*dst = *src1 & ~(*src2)) != 0; + return __bitmap_andnot(dst, src1, src2, nbits); } static inline void bitmap_complement(unsigned long *dst, const unsigned long *src, diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index c5ac87ca7bc6..796df12091b7 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -43,10 +43,10 @@ * int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask * int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask * - * void cpus_and(dst, src1, src2) dst = src1 & src2 [intersection] + * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection] * void cpus_or(dst, src1, src2) dst = src1 | src2 [union] * void cpus_xor(dst, src1, src2) dst = src1 ^ src2 - * void cpus_andnot(dst, src1, src2) dst = src1 & ~src2 + * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2 * void cpus_complement(dst, src) dst = ~src * * int cpus_equal(mask1, mask2) Does mask1 == mask2? @@ -179,10 +179,10 @@ static inline int __cpu_test_and_set(int cpu, cpumask_t *addr) } #define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, +static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p, const cpumask_t *src2p, int nbits) { - bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); + return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits); } #define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS) @@ -201,10 +201,10 @@ static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p, #define cpus_andnot(dst, src1, src2) \ __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS) -static inline void __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, +static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p, const cpumask_t *src2p, int nbits) { - bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); + return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits); } #define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS) @@ -738,11 +738,11 @@ static inline void cpumask_clear(struct cpumask *dstp) * @src1p: the first input * @src2p: the second input */ -static inline void cpumask_and(struct cpumask *dstp, +static inline int cpumask_and(struct cpumask *dstp, const struct cpumask *src1p, const struct cpumask *src2p) { - bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p), + return bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p), cpumask_bits(src2p), nr_cpumask_bits); } @@ -779,11 +779,11 @@ static inline void cpumask_xor(struct cpumask *dstp, * @src1p: the first input * @src2p: the second input */ -static inline void cpumask_andnot(struct cpumask *dstp, +static inline int cpumask_andnot(struct cpumask *dstp, const struct cpumask *src1p, const struct cpumask *src2p) { - bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p), + return bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p), cpumask_bits(src2p), nr_cpumask_bits); } diff --git a/lib/bitmap.c b/lib/bitmap.c index 35a1f7ff4149..702565821c99 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -179,14 +179,16 @@ void __bitmap_shift_left(unsigned long *dst, } EXPORT_SYMBOL(__bitmap_shift_left); -void __bitmap_and(unsigned long *dst, const unsigned long *bitmap1, +int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits) { int k; int nr = BITS_TO_LONGS(bits); + unsigned long result = 0; for (k = 0; k < nr; k++) - dst[k] = bitmap1[k] & bitmap2[k]; + result |= (dst[k] = bitmap1[k] & bitmap2[k]); + return result != 0; } EXPORT_SYMBOL(__bitmap_and); @@ -212,14 +214,16 @@ void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1, } EXPORT_SYMBOL(__bitmap_xor); -void __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1, +int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1, const unsigned long *bitmap2, int bits) { int k; int nr = BITS_TO_LONGS(bits); + unsigned long result = 0; for (k = 0; k < nr; k++) - dst[k] = bitmap1[k] & ~bitmap2[k]; + result |= (dst[k] = bitmap1[k] & ~bitmap2[k]); + return result != 0; } EXPORT_SYMBOL(__bitmap_andnot); From 1a9937b7f07ab6e35515e32a7625f0ba50ab7670 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Thu, 20 Aug 2009 21:16:17 -0300 Subject: [PATCH 264/338] rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B RTL8187B always needs MSR_LINK_ENEDCA flag to be set even when it is in no link mode, otherwise it'll not be able to associate when this flag is not set after the change "mac80211: fix managed mode BSSID handling". By accident, setting BSSID of AP before association makes 8187B to successfuly associate even when ENEDCA flag isn't set, which was the case before the mac80211 change. But now the BSSID of AP we are trying to associate is only available after association is successful, and any attempt to associate without the needed flag doesn't work. Signed-off-by: Herton Ronaldo Krzesinski Tested-by: Larry Finger Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 294250e294dd..87a95588a8e3 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -869,6 +869,9 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev) priv->aifsn[3] = 3; /* AIFSN[AC_BE] */ rtl818x_iowrite8(priv, &priv->map->ACM_CONTROL, 0); + /* ENEDCA flag must always be set, transmit issues? */ + rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_ENEDCA); + return 0; } @@ -1173,13 +1176,16 @@ static void rtl8187_bss_info_changed(struct ieee80211_hw *dev, rtl818x_iowrite8(priv, &priv->map->BSSID[i], info->bssid[i]); + if (priv->is_rtl8187b) + reg = RTL818X_MSR_ENEDCA; + else + reg = 0; + if (is_valid_ether_addr(info->bssid)) { - reg = RTL818X_MSR_INFRA; - if (priv->is_rtl8187b) - reg |= RTL818X_MSR_ENEDCA; + reg |= RTL818X_MSR_INFRA; rtl818x_iowrite8(priv, &priv->map->MSR, reg); } else { - reg = RTL818X_MSR_NO_LINK; + reg |= RTL818X_MSR_NO_LINK; rtl818x_iowrite8(priv, &priv->map->MSR, reg); } From b04e6373d694e977c95ae0ae000e2c1e2cf92d73 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Aug 2009 09:48:10 -0700 Subject: [PATCH 265/338] x86: don't call '->send_IPI_mask()' with an empty mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As noted in 83d349f35e1ae72268c5104dbf9ab2ae635425d4 ("x86: don't send an IPI to the empty set of CPU's"), some APIC's will be very unhappy with an empty destination mask. That commit added a WARN_ON() for that case, and avoided the resulting problem, but didn't fix the underlying reason for why those empty mask cases happened. This fixes that, by checking the result of 'cpumask_andnot()' of the current CPU actually has any other CPU's left in the set of CPU's to be sent a TLB flush, and not calling down to the IPI code if the mask is empty. The reason this started happening at all is that we started passing just the CPU mask pointers around in commit 4595f9620 ("x86: change flush_tlb_others to take a const struct cpumask"), and when we did that, the cpumask was no longer thread-local. Before that commit, flush_tlb_mm() used to create it's own copy of 'mm->cpu_vm_mask' and pass that copy down to the low-level flush routines after having tested that it was not empty. But after changing it to just pass down the CPU mask pointer, the lower level TLB flush routines would now get a pointer to that 'mm->cpu_vm_mask', and that could still change - and become empty - after the test due to other CPU's having flushed their own TLB's. See http://bugzilla.kernel.org/show_bug.cgi?id=13933 for details. Tested-by: Thomas Björnell Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/x86/mm/tlb.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 821e97017e95..c814e144a3f0 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -183,18 +183,17 @@ static void flush_tlb_others_ipi(const struct cpumask *cpumask, f->flush_mm = mm; f->flush_va = va; - cpumask_andnot(to_cpumask(f->flush_cpumask), - cpumask, cpumask_of(smp_processor_id())); + if (cpumask_andnot(to_cpumask(f->flush_cpumask), cpumask, cpumask_of(smp_processor_id()))) { + /* + * We have to send the IPI only to + * CPUs affected. + */ + apic->send_IPI_mask(to_cpumask(f->flush_cpumask), + INVALIDATE_TLB_VECTOR_START + sender); - /* - * We have to send the IPI only to - * CPUs affected. - */ - apic->send_IPI_mask(to_cpumask(f->flush_cpumask), - INVALIDATE_TLB_VECTOR_START + sender); - - while (!cpumask_empty(to_cpumask(f->flush_cpumask))) - cpu_relax(); + while (!cpumask_empty(to_cpumask(f->flush_cpumask))) + cpu_relax(); + } f->flush_mm = NULL; f->flush_va = 0; From 8e9d78edea3ce5c0036f85b93091483f2f15443a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Aug 2009 17:40:08 -0700 Subject: [PATCH 266/338] Re-introduce page mapping check in mark_buffer_dirty() In commit a8e7d49aa7be728c4ae241a75a2a124cdcabc0c5 ("Fix race in create_empty_buffers() vs __set_page_dirty_buffers()"), I removed a test for a NULL page mapping unintentionally when some of the code inside __set_page_dirty() was moved to the callers. That removal generally didn't matter, since a filesystem would serialize truncation (which clears the page mapping) against writing (which marks the buffer dirty), so locking at a higher level (either per-page or an inode at a time) should mean that the buffer page would be stable. And indeed, nothing bad seemed to happen. Except it turns out that apparently reiserfs does something odd when under load and writing out the journal, and we have a number of bugzilla entries that look similar: http://bugzilla.kernel.org/show_bug.cgi?id=13556 http://bugzilla.kernel.org/show_bug.cgi?id=13756 http://bugzilla.kernel.org/show_bug.cgi?id=13876 and it looks like reiserfs depended on that check (the common theme seems to be "data=journal", and a journal writeback during a truncate). I suspect reiserfs should have some additional locking, but in the meantime this should get us back to the pre-2.6.29 behavior. Pattern-pointed-out-by: Roland Kletzing Cc: stable@kernel.org (2.6.29 and 2.6.30) Cc: Jeff Mahoney Cc: Nick Piggin Cc: Al Viro Signed-off-by: Linus Torvalds --- fs/buffer.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index a3ef091a45bd..28f320fac4d4 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1165,8 +1165,11 @@ void mark_buffer_dirty(struct buffer_head *bh) if (!test_set_buffer_dirty(bh)) { struct page *page = bh->b_page; - if (!TestSetPageDirty(page)) - __set_page_dirty(page, page_mapping(page), 0); + if (!TestSetPageDirty(page)) { + struct address_space *mapping = page_mapping(page); + if (mapping) + __set_page_dirty(page, mapping, 0); + } } } From 422bef879e84104fee6dc68ded0e371dbeb5f88e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Aug 2009 18:00:46 -0700 Subject: [PATCH 267/338] Linux 2.6.31-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index abcfa85f8f82..9c87e60d169c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From ee5f9757ea17759e1ce5503bdae2b07e48e32af9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 21 Aug 2009 16:33:34 -0700 Subject: [PATCH 268/338] pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer None of this stuff should execute in hw IRQ context, therefore use a tasklet_hrtimer so that it runs in softirq context. Signed-off-by: David S. Miller Acked-by: Thomas Gleixner --- include/net/pkt_sched.h | 4 ++-- net/sched/sch_api.c | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 82a3191375f5..7eafb8d54470 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -61,8 +61,8 @@ psched_tdiff_bounded(psched_time_t tv1, psched_time_t tv2, psched_time_t bound) } struct qdisc_watchdog { - struct hrtimer timer; - struct Qdisc *qdisc; + struct tasklet_hrtimer timer; + struct Qdisc *qdisc; }; extern void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 24d17ce9c294..e1c2bf7e9ba4 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -468,8 +468,8 @@ static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer) void qdisc_watchdog_init(struct qdisc_watchdog *wd, struct Qdisc *qdisc) { - hrtimer_init(&wd->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - wd->timer.function = qdisc_watchdog; + tasklet_hrtimer_init(&wd->timer, qdisc_watchdog, + CLOCK_MONOTONIC, HRTIMER_MODE_ABS); wd->qdisc = qdisc; } EXPORT_SYMBOL(qdisc_watchdog_init); @@ -485,13 +485,13 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires) wd->qdisc->flags |= TCQ_F_THROTTLED; time = ktime_set(0, 0); time = ktime_add_ns(time, PSCHED_TICKS2NS(expires)); - hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS); + tasklet_hrtimer_start(&wd->timer, time, HRTIMER_MODE_ABS); } EXPORT_SYMBOL(qdisc_watchdog_schedule); void qdisc_watchdog_cancel(struct qdisc_watchdog *wd) { - hrtimer_cancel(&wd->timer); + tasklet_hrtimer_cancel(&wd->timer); wd->qdisc->flags &= ~TCQ_F_THROTTLED; } EXPORT_SYMBOL(qdisc_watchdog_cancel); From 9f844e5118d1627025c8ea7cfc0ea69038ea63fd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Sat, 22 Aug 2009 17:38:23 +0200 Subject: [PATCH 269/338] drm/radeon/kms: Fix radeon_gem_busy_ioctl harder. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was mixing up TTM placement values and flags. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_gem.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c index 14c199802920..d880edf254db 100644 --- a/drivers/gpu/drm/radeon/radeon_gem.c +++ b/drivers/gpu/drm/radeon/radeon_gem.c @@ -274,12 +274,18 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data, } robj = gobj->driver_private; r = radeon_object_busy_domain(robj, &cur_placement); - if (cur_placement == TTM_PL_VRAM) + switch (cur_placement) { + case TTM_PL_VRAM: args->domain = RADEON_GEM_DOMAIN_VRAM; - if (cur_placement == TTM_PL_FLAG_TT) + break; + case TTM_PL_TT: args->domain = RADEON_GEM_DOMAIN_GTT; - if (cur_placement == TTM_PL_FLAG_SYSTEM) + break; + case TTM_PL_SYSTEM: args->domain = RADEON_GEM_DOMAIN_CPU; + default: + break; + } mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(gobj); mutex_unlock(&dev->struct_mutex); From 06739a8ad321b1e5140b318c648b0cc4bf8c6daa Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Sun, 23 Aug 2009 18:09:04 +0200 Subject: [PATCH 270/338] [S390] cio: fix double free after failed device initialization If io_subchannel_initialize_dev fails it will release the only reference to the ccw device therefore the caller should not kfree this device since this is done in the release function. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 3c57c1a18bb8..d593bc76afe3 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -772,10 +772,8 @@ static struct ccw_device * io_subchannel_create_ccwdev(struct subchannel *sch) cdev = io_subchannel_allocate_dev(sch); if (!IS_ERR(cdev)) { ret = io_subchannel_initialize_dev(sch, cdev); - if (ret) { - kfree(cdev); + if (ret) cdev = ERR_PTR(ret); - } } return cdev; } From cf05b824dbb871159e1b4c4f2733b9c9d2f756cf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 23 Aug 2009 18:09:05 +0200 Subject: [PATCH 271/338] [S390] drivers/s390: put NULL test before dereference If the NULL test on block is needed, it should be before the dereference of the base field. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r@ expression E1,E2; identifier fld; statement S1,S2; @@ E1 = E2->fld; ( if (E1 == NULL) S1 else S2 | *if (E2 == NULL) S1 else S2 ) // Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 749836668655..3f62dd50bbbe 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2135,9 +2135,9 @@ static int dasd_getgeo(struct block_device *bdev, struct hd_geometry *geo) struct dasd_device *base; block = bdev->bd_disk->private_data; - base = block->base; if (!block) return -ENODEV; + base = block->base; if (!base->discipline || !base->discipline->fill_geometry) From 637952ca689013339b977558061fa4ca8e07e1c1 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Sun, 23 Aug 2009 18:09:06 +0200 Subject: [PATCH 272/338] [S390] set preferred console based on conmode setup_arch() unconditionally sets the preferred console to ttyS. This breaks the use of 3270 devices as the console. Provide a new function to set the default preferred console for s390. The preferred console depends on the conmode parameter that is used to switch between 3270 and 3215 terminal/console mode. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 9717717c6fea..cbb897bc50bd 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -154,6 +154,20 @@ static int __init condev_setup(char *str) __setup("condev=", condev_setup); +static void __init set_preferred_console(void) +{ + if (MACHINE_IS_KVM) { + add_preferred_console("hvc", 0, NULL); + s390_virtio_console_init(); + return; + } + + if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP) + add_preferred_console("ttyS", 0, NULL); + if (CONSOLE_IS_3270) + add_preferred_console("tty3270", 0, NULL); +} + static int __init conmode_setup(char *str) { #if defined(CONFIG_SCLP_CONSOLE) || defined(CONFIG_SCLP_VT220_CONSOLE) @@ -168,6 +182,7 @@ static int __init conmode_setup(char *str) if (strncmp(str, "3270", 5) == 0) SET_CONSOLE_3270; #endif + set_preferred_console(); return 1; } @@ -780,9 +795,6 @@ static void __init setup_hwcaps(void) void __init setup_arch(char **cmdline_p) { - /* set up preferred console */ - add_preferred_console("ttyS", 0, NULL); - /* * print what head.S has found out about the machine */ @@ -802,11 +814,9 @@ setup_arch(char **cmdline_p) if (MACHINE_IS_VM) pr_info("Linux is running as a z/VM " "guest operating system in 64-bit mode\n"); - else if (MACHINE_IS_KVM) { + else if (MACHINE_IS_KVM) pr_info("Linux is running under KVM in 64-bit mode\n"); - add_preferred_console("hvc", 0, NULL); - s390_virtio_console_init(); - } else + else pr_info("Linux is running natively in 64-bit mode\n"); #endif /* CONFIG_64BIT */ @@ -851,6 +861,7 @@ setup_arch(char **cmdline_p) /* Setup default console */ conmode_default(); + set_preferred_console(); /* Setup zfcpdump support */ setup_zfcpdump(console_devno); From 70bdbd3d1ae9c4ca3e84a43df34262face26575d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 23 Aug 2009 15:27:25 +0200 Subject: [PATCH 273/338] ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready() Modify loops in such way that the register value is checked also after the timeout condition, just in case the heavy interrupt load etc. caused the thread to sleep for the time period exceeding the timeout value. While at it remove an extra ALI_STIMER read from snd_ali_stimer_ready(). Reported-by: Jack Byer Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Takashi Iwai --- sound/pci/ali5451/ali5451.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index c551006e2920..76d76c08339b 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -310,12 +310,16 @@ static int snd_ali_codec_ready(struct snd_ali *codec, unsigned int res; end_time = jiffies + msecs_to_jiffies(250); - do { + + for (;;) { res = snd_ali_5451_peek(codec,port); if (!(res & 0x8000)) return 0; + if (!time_after_eq(end_time, jiffies)) + break; schedule_timeout_uninterruptible(1); - } while (time_after_eq(end_time, jiffies)); + } + snd_ali_5451_poke(codec, port, res & ~0x8000); snd_printdd("ali_codec_ready: codec is not ready.\n "); return -EIO; @@ -327,15 +331,17 @@ static int snd_ali_stimer_ready(struct snd_ali *codec) unsigned long dwChk1,dwChk2; dwChk1 = snd_ali_5451_peek(codec, ALI_STIMER); - dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER); - end_time = jiffies + msecs_to_jiffies(250); - do { + + for (;;) { dwChk2 = snd_ali_5451_peek(codec, ALI_STIMER); if (dwChk2 != dwChk1) return 0; + if (!time_after_eq(end_time, jiffies)) + break; schedule_timeout_uninterruptible(1); - } while (time_after_eq(end_time, jiffies)); + } + snd_printk(KERN_ERR "ali_stimer_read: stimer is not ready.\n"); return -EIO; } From 38acce2d7983632100a9ff3fd20295f6e34074a8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 21 Aug 2009 16:51:38 -0700 Subject: [PATCH 274/338] pkt_sched: Convert CBQ to tasklet_hrtimer. This code expects to run in softirq context, and bare hrtimers run in hw IRQ context. Signed-off-by: David S. Miller Acked-by: Thomas Gleixner --- net/sched/sch_cbq.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index d5798e17a832..81652d6ccd36 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -163,7 +163,7 @@ struct cbq_sched_data psched_time_t now_rt; /* Cached real time */ unsigned pmask; - struct hrtimer delay_timer; + struct tasklet_hrtimer delay_timer; struct qdisc_watchdog watchdog; /* Watchdog timer, started when CBQ has backlog, but cannot @@ -503,6 +503,8 @@ static void cbq_ovl_delay(struct cbq_class *cl) cl->undertime = q->now + delay; if (delay > 0) { + struct hrtimer *ht; + sched += delay + cl->penalty; cl->penalized = sched; cl->cpriority = TC_CBQ_MAXPRIO; @@ -510,12 +512,12 @@ static void cbq_ovl_delay(struct cbq_class *cl) expires = ktime_set(0, 0); expires = ktime_add_ns(expires, PSCHED_TICKS2NS(sched)); - if (hrtimer_try_to_cancel(&q->delay_timer) && - ktime_to_ns(ktime_sub( - hrtimer_get_expires(&q->delay_timer), - expires)) > 0) - hrtimer_set_expires(&q->delay_timer, expires); - hrtimer_restart(&q->delay_timer); + ht = &q->delay_timer.timer; + if (hrtimer_try_to_cancel(ht) && + ktime_to_ns(ktime_sub(hrtimer_get_expires(ht), + expires)) > 0) + hrtimer_set_expires(ht, expires); + hrtimer_restart(ht); cl->delayed = 1; cl->xstats.overactions++; return; @@ -621,7 +623,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer) time = ktime_set(0, 0); time = ktime_add_ns(time, PSCHED_TICKS2NS(now + delay)); - hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS); + tasklet_hrtimer_start(&q->delay_timer, time, HRTIMER_MODE_ABS); } sch->flags &= ~TCQ_F_THROTTLED; @@ -1214,7 +1216,7 @@ cbq_reset(struct Qdisc* sch) q->tx_class = NULL; q->tx_borrowed = NULL; qdisc_watchdog_cancel(&q->watchdog); - hrtimer_cancel(&q->delay_timer); + tasklet_hrtimer_cancel(&q->delay_timer); q->toplevel = TC_CBQ_MAXLEVEL; q->now = psched_get_time(); q->now_rt = q->now; @@ -1397,7 +1399,8 @@ static int cbq_init(struct Qdisc *sch, struct nlattr *opt) q->link.minidle = -0x7FFFFFFF; qdisc_watchdog_init(&q->watchdog, sch); - hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); + tasklet_hrtimer_init(&q->delay_timer, cbq_undelay, + CLOCK_MONOTONIC, HRTIMER_MODE_ABS); q->delay_timer.function = cbq_undelay; q->toplevel = TC_CBQ_MAXLEVEL; q->now = psched_get_time(); From 6ff9c2e7fa8ca63a575792534b63c5092099c286 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Sun, 23 Aug 2009 19:02:13 -0700 Subject: [PATCH 275/338] E100: fix interaction with swiotlb on X86. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Data in descriptors is accessed simultaneously by the chip (writing status and size when a packet is received) and CPU (reading to check if the packet was received). This isn't a valid usage of PCI DMA API, which requires use of the coherent (consistent) memory for such purpose. Unfortunately e100 chips working in "simplified" RX mode have to store received data directly after the descriptor. Fixing the driver to conform to the API would require using unsupported "flexible" RX mode or receiving data into a coherent memory and using CPU to copy it to network buffers. This patch, while not yet making the driver conform to the PCI DMA API, allows it to work correctly on X86 with swiotlb (while not breaking other architectures). Signed-off-by: Krzysztof Hałasa Signed-off-by: David S. Miller --- drivers/net/e100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 41b648a67fec..3a6735dc9f6a 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1899,7 +1899,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, nic->ru_running = RU_SUSPENDED; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, sizeof(struct rfd), - PCI_DMA_BIDIRECTIONAL); + PCI_DMA_FROMDEVICE); return -ENODATA; } From ca6982b858e1d08010c1d29d8e8255b2ac2ad70a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Sun, 23 Aug 2009 19:06:28 -0700 Subject: [PATCH 276/338] ipv6: Fix commit 63d9950b08184e6531adceb65f64b429909cc101 (ipv6: Make v4-mapped bindings consistent with IPv4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 63d9950b08184e6531adceb65f64b429909cc101 (ipv6: Make v4-mapped bindings consistent with IPv4) changes behavior of inet6_bind() for v4-mapped addresses so it should behave the same way as inet_bind(). During this change setting of err to -EADDRNOTAVAIL got lost: af_inet.c:469 inet_bind() err = -EADDRNOTAVAIL; if (!sysctl_ip_nonlocal_bind && !(inet->freebind || inet->transparent) && addr->sin_addr.s_addr != htonl(INADDR_ANY) && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) goto out; af_inet6.c:463 inet6_bind() if (addr_type == IPV6_ADDR_MAPPED) { int chk_addr_ret; /* Binding to v4-mapped address on a v6-only socket * makes no sense */ if (np->ipv6only) { err = -EINVAL; goto out; } /* Reproduce AF_INET checks to make the bindings consitant */ v4addr = addr->sin6_addr.s6_addr32[3]; chk_addr_ret = inet_addr_type(net, v4addr); if (!sysctl_ip_nonlocal_bind && !(inet->freebind || inet->transparent) && v4addr != htonl(INADDR_ANY) && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST) goto out; } else { Signed-off-by Bruno Prémont Signed-off-by: David S. Miller --- net/ipv6/af_inet6.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index caa0278d30a9..45f9a2a42d56 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -306,8 +306,10 @@ int inet6_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) v4addr != htonl(INADDR_ANY) && chk_addr_ret != RTN_LOCAL && chk_addr_ret != RTN_MULTICAST && - chk_addr_ret != RTN_BROADCAST) + chk_addr_ret != RTN_BROADCAST) { + err = -EADDRNOTAVAIL; goto out; + } } else { if (addr_type != IPV6_ADDR_ANY) { struct net_device *dev = NULL; From 2149f66f49ab07515666127bf5140c5c94677af8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 20 Aug 2009 02:47:34 +0000 Subject: [PATCH 277/338] netfilter: xt_quota: fix wrong return value (error case) Success was indicated on a memory allocation failure, thereby causing a crash due to a later NULL deref. (Affects v2.6.30-rc1 up to here.) Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_quota.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_quota.c b/net/netfilter/xt_quota.c index 98fc190e8f0e..390b7d09fe51 100644 --- a/net/netfilter/xt_quota.c +++ b/net/netfilter/xt_quota.c @@ -52,7 +52,7 @@ static bool quota_mt_check(const struct xt_mtchk_param *par) q->master = kmalloc(sizeof(*q->master), GFP_KERNEL); if (q->master == NULL) - return -ENOMEM; + return false; q->master->quota = q->quota; return true; From c189308bd8b6a29b11c3ec29a42a3f0aabad6bc8 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 21 Aug 2009 00:46:06 +0000 Subject: [PATCH 278/338] net: Fix Micrel KSZ8842 Kconfig description MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Mohr Acked-by: Richard Röjfors Signed-off-by: David S. Miller --- drivers/net/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7a90e7ce5a9c..5ce7cbabd7a7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1727,7 +1727,8 @@ config KS8842 tristate "Micrel KSZ8842" depends on HAS_IOMEM help - This platform driver is for Micrel KSZ8842 chip. + This platform driver is for Micrel KSZ8842 / KS8842 + 2-port ethernet switch chip (managed, VLAN, QoS). config KS8851 tristate "Micrel KS8851 SPI" From 79b1bee888d43b14cf0c08fb8e5aa6cb161e48f8 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Fri, 21 Aug 2009 03:33:36 +0000 Subject: [PATCH 279/338] netpoll: warning for ndo_start_xmit returns with interrupts enabled WARN_ONCE for ndo_start_xmit() enable interrupts in netpoll_send_skb(), because the NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). Signed-off-by: Dongdong Deng Acked-by: Matt Mackall Signed-off-by: David S. Miller --- net/core/netpoll.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index df30feb2fc72..1b76eb11deb4 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -319,6 +319,11 @@ static void netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) udelay(USEC_PER_POLL); } + + WARN_ONCE(!irqs_disabled(), + "netpoll_send_skb(): %s enabled interrupts in poll (%pF)\n", + dev->name, ops->ndo_start_xmit); + local_irq_restore(flags); } From 4871953c0ef2cafeb37bbe186d9d13dcb24fc2c5 Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Sun, 23 Aug 2009 19:49:07 -0700 Subject: [PATCH 280/338] drivers/net: fixed drivers that support netpoll use ndo_start_xmit() The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng Acked-by: Matt Mackall Signed-off-by: David S. Miller --- drivers/net/fec_mpc52xx.c | 5 +++-- drivers/net/ixp2000/ixpdev.c | 5 +++-- drivers/net/macb.c | 7 ++++--- drivers/net/mlx4/en_tx.c | 5 +++-- 4 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index cc786333d95c..c40113f58963 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -309,6 +309,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct mpc52xx_fec_priv *priv = netdev_priv(dev); struct bcom_fec_bd *bd; + unsigned long flags; if (bcom_queue_full(priv->tx_dmatsk)) { if (net_ratelimit()) @@ -316,7 +317,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_BUSY; } - spin_lock_irq(&priv->lock); + spin_lock_irqsave(&priv->lock, flags); dev->trans_start = jiffies; bd = (struct bcom_fec_bd *) @@ -332,7 +333,7 @@ static int mpc52xx_fec_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); } - spin_unlock_irq(&priv->lock); + spin_unlock_irqrestore(&priv->lock, flags); return NETDEV_TX_OK; } diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 2a0174b62e96..92fb8235c766 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -41,6 +41,7 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) struct ixpdev_priv *ip = netdev_priv(dev); struct ixpdev_tx_desc *desc; int entry; + unsigned long flags; if (unlikely(skb->len > PAGE_SIZE)) { /* @@@ Count drops. */ @@ -63,11 +64,11 @@ static int ixpdev_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; - local_irq_disable(); + local_irq_save(flags); ip->tx_queue_entries++; if (ip->tx_queue_entries == TX_BUF_COUNT_PER_CHAN) netif_stop_queue(dev); - local_irq_enable(); + local_irq_restore(flags); return 0; } diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 5b5c25368d1e..e3601cf3f931 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -620,6 +620,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_addr_t mapping; unsigned int len, entry; u32 ctrl; + unsigned long flags; #ifdef DEBUG int i; @@ -635,12 +636,12 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) #endif len = skb->len; - spin_lock_irq(&bp->lock); + spin_lock_irqsave(&bp->lock, flags); /* This is a hard error, log it. */ if (TX_BUFFS_AVAIL(bp) < 1) { netif_stop_queue(dev); - spin_unlock_irq(&bp->lock); + spin_unlock_irqrestore(&bp->lock, flags); dev_err(&bp->pdev->dev, "BUG! Tx Ring full when queue awake!\n"); dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n", @@ -674,7 +675,7 @@ static int macb_start_xmit(struct sk_buff *skb, struct net_device *dev) if (TX_BUFFS_AVAIL(bp) < 1) netif_stop_queue(dev); - spin_unlock_irq(&bp->lock); + spin_unlock_irqrestore(&bp->lock, flags); dev->trans_start = jiffies; diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 5a88b3f57693..62208401c4df 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -437,6 +437,7 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) { struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind]; struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind]; + unsigned long flags; /* If we don't have a pending timer, set one up to catch our recent post in case the interface becomes idle */ @@ -445,9 +446,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock_irq(&ring->comp_lock)) { + if (spin_trylock_irqsave(&ring->comp_lock, flags)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock_irq(&ring->comp_lock); + spin_unlock_irqrestore(&ring->comp_lock, flags); } } From 6777d773a463ac045d333b989d4e44660f8d92ad Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Fri, 21 Aug 2009 14:32:48 -0400 Subject: [PATCH 281/338] kernel_read: redefine offset type vfs_read() offset is defined as loff_t, but kernel_read() offset is only defined as unsigned long. Redefine kernel_read() offset as loff_t. Cc: stable@kernel.org Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- fs/exec.c | 4 ++-- include/linux/fs.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 4a8849e45b21..fb4f3cdda78c 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -678,8 +678,8 @@ exit: } EXPORT_SYMBOL(open_exec); -int kernel_read(struct file *file, unsigned long offset, - char *addr, unsigned long count) +int kernel_read(struct file *file, loff_t offset, + char *addr, unsigned long count) { mm_segment_t old_fs; loff_t pos = offset; diff --git a/include/linux/fs.h b/include/linux/fs.h index 67888a9e0655..73e9b643e455 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2123,7 +2123,7 @@ extern struct file *do_filp_open(int dfd, const char *pathname, int open_flag, int mode, int acc_mode); extern int may_open(struct path *, int, int); -extern int kernel_read(struct file *, unsigned long, char *, unsigned long); +extern int kernel_read(struct file *, loff_t, char *, unsigned long); extern struct file * open_exec(const char *); /* fs/dcache.c -- generic fs support functions */ From 16bfa38b1936212428cb38fbfbbb8f6c62b8d81f Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Fri, 21 Aug 2009 14:32:49 -0400 Subject: [PATCH 282/338] ima: hashing large files bug fix Hashing files larger than INT_MAX causes process to loop. Dependent on redefining kernel_read() offset type to loff_t. (http://bugzilla.kernel.org/show_bug.cgi?id=13909) Cc: stable@kernel.org Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/ima_crypto.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c index 63003a63aaee..46642a19bc78 100644 --- a/security/integrity/ima/ima_crypto.c +++ b/security/integrity/ima/ima_crypto.c @@ -45,9 +45,9 @@ int ima_calc_hash(struct file *file, char *digest) { struct hash_desc desc; struct scatterlist sg[1]; - loff_t i_size; + loff_t i_size, offset = 0; char *rbuf; - int rc, offset = 0; + int rc; rc = init_desc(&desc); if (rc != 0) @@ -67,6 +67,8 @@ int ima_calc_hash(struct file *file, char *digest) rc = rbuf_len; break; } + if (rbuf_len == 0) + break; offset += rbuf_len; sg_init_one(sg, rbuf, rbuf_len); From 28e9fc592cb8c7a43e4d3147b38be6032a0e81bc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sun, 23 Aug 2009 22:55:51 -0700 Subject: [PATCH 283/338] NET: llc, zero sockaddr_llc struct sllc_arphrd member of sockaddr_llc might not be changed. Zero sllc before copying to the above layer's structure. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- net/llc/af_llc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index 9208cf5f2bd5..c45eee1c0e8d 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -914,6 +914,7 @@ static int llc_ui_getname(struct socket *sock, struct sockaddr *uaddr, struct llc_sock *llc = llc_sk(sk); int rc = 0; + memset(&sllc, 0, sizeof(sllc)); lock_sock(sk); if (sock_flag(sk, SOCK_ZAPPED)) goto out; From d2f3ad4cedc00c8ee848e7abe9b2bbc93b9a8c2d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 23 Aug 2009 22:57:30 -0700 Subject: [PATCH 284/338] pxaficp-ir: remove incorrect net_device_ops This patch fixes broken pxaficp-ir. The problem was in incorrect net_device_ops being specified which prevented the driver from operating. The symptoms were: - failing ifconfig for IrLAN, resulting in SIOCSIFFLAGS: Cannot assign requested address - irattach working for IrCOMM, but the port stayed disabled Moreover this patch corrects missing sysfs device link. Signed-off-by: Marek Vasut Signed-off-by: David S. Miller --- drivers/net/irda/pxaficp_ir.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 3376a4f39e0a..77d10edefd25 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -803,9 +803,6 @@ static const struct net_device_ops pxa_irda_netdev_ops = { .ndo_stop = pxa_irda_stop, .ndo_start_xmit = pxa_irda_hard_xmit, .ndo_do_ioctl = pxa_irda_ioctl, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, }; static int pxa_irda_probe(struct platform_device *pdev) @@ -830,6 +827,7 @@ static int pxa_irda_probe(struct platform_device *pdev) if (!dev) goto err_mem_3; + SET_NETDEV_DEV(dev, &pdev->dev); si = netdev_priv(dev); si->dev = &pdev->dev; si->pdata = pdev->dev.platform_data; From 8ff499e43c537648399fca8ba39d24c0768b3fab Mon Sep 17 00:00:00 2001 From: Dongdong Deng Date: Sun, 23 Aug 2009 22:59:04 -0700 Subject: [PATCH 285/338] smc91x: let smc91x work well under netpoll The NETPOLL requires that interrupts remain disabled in its callbacks. Using *_irq_save()/irq_restore() to replace *_irq_disable()/irq_enable() functions in NETPOLL's callbacks of smc91x, so that it doesn't enable interrupts when already disabled, and kgdboe/netconsole would work properly over smc91x. Signed-off-by: Dongdong Deng Acked-by: Nicolas Pitre Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 40 ++++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 18 deletions(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 1c70e999cc50..9da1fa12a67c 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -196,21 +196,23 @@ static void PRINT_PKT(u_char *buf, int length) /* this enables an interrupt in the interrupt mask register */ #define SMC_ENABLE_INT(lp, x) do { \ unsigned char mask; \ - spin_lock_irq(&lp->lock); \ + unsigned long smc_enable_flags; \ + spin_lock_irqsave(&lp->lock, smc_enable_flags); \ mask = SMC_GET_INT_MASK(lp); \ mask |= (x); \ SMC_SET_INT_MASK(lp, mask); \ - spin_unlock_irq(&lp->lock); \ + spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \ } while (0) /* this disables an interrupt from the interrupt mask register */ #define SMC_DISABLE_INT(lp, x) do { \ unsigned char mask; \ - spin_lock_irq(&lp->lock); \ + unsigned long smc_disable_flags; \ + spin_lock_irqsave(&lp->lock, smc_disable_flags); \ mask = SMC_GET_INT_MASK(lp); \ mask &= ~(x); \ SMC_SET_INT_MASK(lp, mask); \ - spin_unlock_irq(&lp->lock); \ + spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \ } while (0) /* @@ -520,21 +522,21 @@ static inline void smc_rcv(struct net_device *dev) * any other concurrent access and C would always interrupt B. But life * isn't that easy in a SMP world... */ -#define smc_special_trylock(lock) \ +#define smc_special_trylock(lock, flags) \ ({ \ int __ret; \ - local_irq_disable(); \ + local_irq_save(flags); \ __ret = spin_trylock(lock); \ if (!__ret) \ - local_irq_enable(); \ + local_irq_restore(flags); \ __ret; \ }) -#define smc_special_lock(lock) spin_lock_irq(lock) -#define smc_special_unlock(lock) spin_unlock_irq(lock) +#define smc_special_lock(lock, flags) spin_lock_irq(lock, flags) +#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags) #else -#define smc_special_trylock(lock) (1) -#define smc_special_lock(lock) do { } while (0) -#define smc_special_unlock(lock) do { } while (0) +#define smc_special_trylock(lock, flags) (1) +#define smc_special_lock(lock, flags) do { } while (0) +#define smc_special_unlock(lock, flags) do { } while (0) #endif /* @@ -548,10 +550,11 @@ static void smc_hardware_send_pkt(unsigned long data) struct sk_buff *skb; unsigned int packet_no, len; unsigned char *buf; + unsigned long flags; DBG(3, "%s: %s\n", dev->name, __func__); - if (!smc_special_trylock(&lp->lock)) { + if (!smc_special_trylock(&lp->lock, flags)) { netif_stop_queue(dev); tasklet_schedule(&lp->tx_task); return; @@ -559,7 +562,7 @@ static void smc_hardware_send_pkt(unsigned long data) skb = lp->pending_tx_skb; if (unlikely(!skb)) { - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); return; } lp->pending_tx_skb = NULL; @@ -569,7 +572,7 @@ static void smc_hardware_send_pkt(unsigned long data) printk("%s: Memory allocation failed.\n", dev->name); dev->stats.tx_errors++; dev->stats.tx_fifo_errors++; - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); goto done; } @@ -608,7 +611,7 @@ static void smc_hardware_send_pkt(unsigned long data) /* queue the packet for TX */ SMC_SET_MMU_CMD(lp, MC_ENQUEUE); - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); dev->trans_start = jiffies; dev->stats.tx_packets++; @@ -633,6 +636,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; unsigned int numPages, poll_count, status; + unsigned long flags; DBG(3, "%s: %s\n", dev->name, __func__); @@ -658,7 +662,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - smc_special_lock(&lp->lock); + smc_special_lock(&lp->lock, flags); /* now, try to allocate the memory */ SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages); @@ -676,7 +680,7 @@ static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } } while (--poll_count); - smc_special_unlock(&lp->lock); + smc_special_unlock(&lp->lock, flags); lp->pending_tx_skb = skb; if (!poll_count) { From edd1365e90eb32625041d09de427d7b03461bc5c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 24 Aug 2009 09:11:58 +0200 Subject: [PATCH 286/338] sound: vx222: fix input level control range check Fix a logic error in the range check of the input level control that would prevent setting any volume less than the maximum. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/vx222/vx222_ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/vx222/vx222_ops.c b/sound/pci/vx222/vx222_ops.c index 6416d3f0c7be..a69e774d0b13 100644 --- a/sound/pci/vx222/vx222_ops.c +++ b/sound/pci/vx222/vx222_ops.c @@ -885,10 +885,10 @@ static int vx_input_level_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem struct vx_core *_chip = snd_kcontrol_chip(kcontrol); struct snd_vx222 *chip = (struct snd_vx222 *)_chip; if (ucontrol->value.integer.value[0] < 0 || - ucontrol->value.integer.value[0] < MIC_LEVEL_MAX) + ucontrol->value.integer.value[0] > MIC_LEVEL_MAX) return -EINVAL; if (ucontrol->value.integer.value[1] < 0 || - ucontrol->value.integer.value[1] < MIC_LEVEL_MAX) + ucontrol->value.integer.value[1] > MIC_LEVEL_MAX) return -EINVAL; mutex_lock(&_chip->mixer_mutex); if (chip->input_level[0] != ucontrol->value.integer.value[0] || From 6d41807614151829ae17a3a58bff8572af5e407e Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 10 Aug 2009 16:03:43 -0400 Subject: [PATCH 287/338] ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED The old description for this configuration option was perhaps not completely balanced in terms of describing the tradeoffs of using a default of data=writeback vs. data=ordered. Despite the fact that old description very strongly recomended disabling this feature, all of the major distributions have elected to preserve the existing 'legacy' default, which is a strong hint that it perhaps wasn't telling the whole story. This revised description has been vetted by a number of ext3 developers as being better at informing the user about the tradeoffs of enabling or disabling this configuration feature. Cc: linux-ext4@vger.kernel.org Signed-off-by: "Theodore Ts'o" Signed-off-by: Jan Kara --- fs/ext3/Kconfig | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/fs/ext3/Kconfig b/fs/ext3/Kconfig index fb3c1a21b135..522b15498f45 100644 --- a/fs/ext3/Kconfig +++ b/fs/ext3/Kconfig @@ -29,23 +29,25 @@ config EXT3_FS module will be called ext3. config EXT3_DEFAULTS_TO_ORDERED - bool "Default to 'data=ordered' in ext3 (legacy option)" + bool "Default to 'data=ordered' in ext3" depends on EXT3_FS help - If a filesystem does not explicitly specify a data ordering - mode, and the journal capability allowed it, ext3 used to - historically default to 'data=ordered'. + The journal mode options for ext3 have different tradeoffs + between when data is guaranteed to be on disk and + performance. The use of "data=writeback" can cause + unwritten data to appear in files after an system crash or + power failure, which can be a security issue. However, + "data=ordered" mode can also result in major performance + problems, including seconds-long delays before an fsync() + call returns. For details, see: - That was a rather unfortunate choice, because it leads to all - kinds of latency problems, and the 'data=writeback' mode is more - appropriate these days. + http://ext4.wiki.kernel.org/index.php/Ext3_data_mode_tradeoffs - You should probably always answer 'n' here, and if you really - want to use 'data=ordered' mode, set it in the filesystem itself - with 'tune2fs -o journal_data_ordered'. - - But if you really want to enable the legacy default, you can do - so by answering 'y' to this question. + If you have been historically happy with ext3's performance, + data=ordered mode will be a safe choice and you should + answer 'y' here. If you understand the reliability and data + privacy issues of data=writeback and are willing to make + that trade off, answer 'n'. config EXT3_FS_XATTR bool "Ext3 extended attributes" From 3c4cec65274481ec6332b0a91f19b4c8c5394801 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 24 Aug 2009 16:38:43 +0200 Subject: [PATCH 288/338] ext3: Improve error message that changing journaling mode on remount is not possible This patch makes the error message about changing journaling mode on remount more descriptive. Some people are going to hit this error now due to commit bbae8bcc49bc4d002221dab52c79a50a82e7cd1f if they configure a kernel to default to data=writeback mode. The problem happens if they have data=ordered set for the root filesystem in /etc/fstab but not in the kernel command line (and they don't use initrd). Their filesystem then gets mounted as data=writeback by kernel but then their boot fails because init scripts won't be able to remount the filesystem rw. Better error message will hopefully make it easier for them to find the error in their setup and bother us less with error reports :). Signed-off-by: Jan Kara --- fs/ext3/super.c | 40 +++++++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 13 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 524b349c6299..a8d80a7f1105 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -543,6 +543,19 @@ static inline void ext3_show_quota_options(struct seq_file *seq, struct super_bl #endif } +static char *data_mode_string(unsigned long mode) +{ + switch (mode) { + case EXT3_MOUNT_JOURNAL_DATA: + return "journal"; + case EXT3_MOUNT_ORDERED_DATA: + return "ordered"; + case EXT3_MOUNT_WRITEBACK_DATA: + return "writeback"; + } + return "unknown"; +} + /* * Show an option if * - it's set to a non-default value OR @@ -616,13 +629,8 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs) if (test_opt(sb, NOBH)) seq_puts(seq, ",nobh"); - if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA) - seq_puts(seq, ",data=journal"); - else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA) - seq_puts(seq, ",data=ordered"); - else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) - seq_puts(seq, ",data=writeback"); - + seq_printf(seq, ",data=%s", data_mode_string(sbi->s_mount_opt & + EXT3_MOUNT_DATA_FLAGS)); if (test_opt(sb, DATA_ERR_ABORT)) seq_puts(seq, ",data_err=abort"); @@ -1024,12 +1032,18 @@ static int parse_options (char *options, struct super_block *sb, datacheck: if (is_remount) { if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS) - != data_opt) { - printk(KERN_ERR - "EXT3-fs: cannot change data " - "mode on remount\n"); - return 0; - } + == data_opt) + break; + printk(KERN_ERR + "EXT3-fs (device %s): Cannot change " + "data mode on remount. The filesystem " + "is mounted in data=%s mode and you " + "try to remount it in data=%s mode.\n", + sb->s_id, + data_mode_string(sbi->s_mount_opt & + EXT3_MOUNT_DATA_FLAGS), + data_mode_string(data_opt)); + return 0; } else { sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS; sbi->s_mount_opt |= data_opt; From 3e475f579e56caf57cadc0cc995c152f9da641a9 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 17 Aug 2009 23:34:10 -1000 Subject: [PATCH 289/338] [ARM] Kirkwood: __init requires linux/init.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Include linux/init.h for __init to fix this error: CC [M] drivers/net/wireless/wl12xx/boot.o In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13, from arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/net/wireless/wl12xx/boot.c:24: arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’ make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1 make[5]: *** [drivers/net/wireless/wl12xx] Error 2 Signed-off-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/plat-orion/include/plat/gpio.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h index 9646a94ed3d0..07c430fdc9ef 100644 --- a/arch/arm/plat-orion/include/plat/gpio.h +++ b/arch/arm/plat-orion/include/plat/gpio.h @@ -11,6 +11,8 @@ #ifndef __PLAT_GPIO_H #define __PLAT_GPIO_H +#include + /* * GENERIC_GPIO primitives. */ From c55bf102b675c94edef006ce487d909669221d90 Mon Sep 17 00:00:00 2001 From: John Holland Date: Wed, 19 Aug 2009 13:24:03 -1000 Subject: [PATCH 290/338] [ARM] Kirkwood: enable eSATA on QNAP TS-219P Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware allowing the use of the discrete eSATA controller connected to the PCIe bus in the TS-219P. Signed-off-by: John Holland Tested-by: Thomas Reitmayr Signed-off-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 2 +- arch/arm/mach-kirkwood/ts219-setup.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 0a1abb978d7e..af74cc2de8b6 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -629,7 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index 01aa213c0a6f..ec1a64f263d2 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -206,6 +206,15 @@ static void __init qnap_ts219_init(void) } +static int __init ts219_pci_init(void) +{ + if (machine_is_ts219()) + kirkwood_pcie_init(); + + return 0; +} +subsys_initcall(ts219_pci_init); + MACHINE_START(TS219, "QNAP TS-119/TS-219") /* Maintainer: Martin Michlmayr */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, From 94da210af4978b94cb70318bd1b282a73c50b175 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Thu, 20 Aug 2009 09:19:53 +0200 Subject: [PATCH 291/338] [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the loop in orion_nand_read_buf. This patch makes the instruction volatile to avoid the issue. I've discussed this at gcc-help, refer to the thread at http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html The early clobber is added to avoid the destination registers and the source register overlapping. Signed-off-by: Simon Kagstrom Signed-off-by: Nicolas Pitre --- drivers/mtd/nand/orion_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 7ad972229db4..0d9d4bc9c762 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -61,7 +61,7 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) buf64 = (uint64_t *)buf; while (i < len/8) { uint64_t x; - asm ("ldrd\t%0, [%1]" : "=r" (x) : "r" (io_base)); + asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base)); buf64[i++] = x; } i *= 8; From a6a06f7b577f89d0b916c5ccaff67ca5ed444a78 Mon Sep 17 00:00:00 2001 From: Amerigo Wang Date: Fri, 21 Aug 2009 04:34:45 -0400 Subject: [PATCH 292/338] x86: Fix an incorrect argument of reserve_bootmem() This line looks suspicious, because if this is true, then the 'flags' parameter of function reserve_bootmem_generic() will be unused when !CONFIG_NUMA. I don't think this is what we want. Signed-off-by: WANG Cong Cc: Yinghai Lu Cc: akpm@linux-foundation.org LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 6176fe8f29e0..ea56b8cbb6a6 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, return ret; #else - reserve_bootmem(phys, len, BOOTMEM_DEFAULT); + reserve_bootmem(phys, len, flags); #endif if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) { From 353d5c30c666580347515da609dd74a2b8e9b828 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 24 Aug 2009 16:30:28 +0100 Subject: [PATCH 293/338] mm: fix hugetlb bug due to user_shm_unlock call 2.6.30's commit 8a0bdec194c21c8fdef840989d0d7b742bb5d4bc removed user_shm_lock() calls in hugetlb_file_setup() but left the user_shm_unlock call in shm_destroy(). In detail: Assume that can_do_hugetlb_shm() returns true and hence user_shm_lock() is not called in hugetlb_file_setup(). However, user_shm_unlock() is called in any case in shm_destroy() and in the following atomic_dec_and_lock(&up->__count) in free_uid() is executed and if up->__count gets zero, also cleanup_user_struct() is scheduled. Note that sched_destroy_user() is empty if CONFIG_USER_SCHED is not set. However, the ref counter up->__count gets unexpectedly non-positive and the corresponding structs are freed even though there are live references to them, resulting in a kernel oops after a lots of shmget(SHM_HUGETLB)/shmctl(IPC_RMID) cycles and CONFIG_USER_SCHED set. Hugh changed Stefan's suggested patch: can_do_hugetlb_shm() at the time of shm_destroy() may give a different answer from at the time of hugetlb_file_setup(). And fixed newseg()'s no_id error path, which has missed user_shm_unlock() ever since it came in 2.6.9. Reported-by: Stefan Huber Signed-off-by: Hugh Dickins Tested-by: Stefan Huber Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/hugetlbfs/inode.c | 20 ++++++++++++-------- include/linux/hugetlb.h | 6 ++++-- ipc/shm.c | 8 +++++--- 3 files changed, 21 insertions(+), 13 deletions(-) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 941c8425c10b..cb88dac8ccaa 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -935,26 +935,28 @@ static int can_do_hugetlb_shm(void) return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group); } -struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag) +struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag, + struct user_struct **user) { int error = -ENOMEM; - int unlock_shm = 0; struct file *file; struct inode *inode; struct dentry *dentry, *root; struct qstr quick_string; - struct user_struct *user = current_user(); + *user = NULL; if (!hugetlbfs_vfsmount) return ERR_PTR(-ENOENT); if (!can_do_hugetlb_shm()) { - if (user_shm_lock(size, user)) { - unlock_shm = 1; + *user = current_user(); + if (user_shm_lock(size, *user)) { WARN_ONCE(1, "Using mlock ulimits for SHM_HUGETLB deprecated\n"); - } else + } else { + *user = NULL; return ERR_PTR(-EPERM); + } } root = hugetlbfs_vfsmount->mnt_root; @@ -996,8 +998,10 @@ out_inode: out_dentry: dput(dentry); out_shm_unlock: - if (unlock_shm) - user_shm_unlock(size, user); + if (*user) { + user_shm_unlock(size, *user); + *user = NULL; + } return ERR_PTR(error); } diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 2723513a5651..5cbc620bdfe0 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -10,6 +10,7 @@ #include struct ctl_table; +struct user_struct; int PageHuge(struct page *page); @@ -146,7 +147,8 @@ static inline struct hugetlbfs_sb_info *HUGETLBFS_SB(struct super_block *sb) extern const struct file_operations hugetlbfs_file_operations; extern struct vm_operations_struct hugetlb_vm_ops; -struct file *hugetlb_file_setup(const char *name, size_t, int); +struct file *hugetlb_file_setup(const char *name, size_t size, int acct, + struct user_struct **user); int hugetlb_get_quota(struct address_space *mapping, long delta); void hugetlb_put_quota(struct address_space *mapping, long delta); @@ -168,7 +170,7 @@ static inline void set_file_hugepages(struct file *file) #define is_file_hugepages(file) 0 #define set_file_hugepages(file) BUG() -#define hugetlb_file_setup(name,size,acctflag) ERR_PTR(-ENOSYS) +#define hugetlb_file_setup(name,size,acct,user) ERR_PTR(-ENOSYS) #endif /* !CONFIG_HUGETLBFS */ diff --git a/ipc/shm.c b/ipc/shm.c index 15dd238e5338..1bc4701ef4f0 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -174,7 +174,7 @@ static void shm_destroy(struct ipc_namespace *ns, struct shmid_kernel *shp) shm_unlock(shp); if (!is_file_hugepages(shp->shm_file)) shmem_lock(shp->shm_file, 0, shp->mlock_user); - else + else if (shp->mlock_user) user_shm_unlock(shp->shm_file->f_path.dentry->d_inode->i_size, shp->mlock_user); fput (shp->shm_file); @@ -369,8 +369,8 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) /* hugetlb_file_setup applies strict accounting */ if (shmflg & SHM_NORESERVE) acctflag = VM_NORESERVE; - file = hugetlb_file_setup(name, size, acctflag); - shp->mlock_user = current_user(); + file = hugetlb_file_setup(name, size, acctflag, + &shp->mlock_user); } else { /* * Do not allow no accounting for OVERCOMMIT_NEVER, even @@ -410,6 +410,8 @@ static int newseg(struct ipc_namespace *ns, struct ipc_params *params) return error; no_id: + if (shp->mlock_user) /* shmflg & SHM_HUGETLB case */ + user_shm_unlock(size, shp->mlock_user); fput(file); no_file: security_shm_free(shp); From 7111dc73923e9737b38a3ef5b5f236109000ff28 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 24 Aug 2009 19:21:29 -0400 Subject: [PATCH 294/338] NFSv4: Fix an infinite looping problem with the nfs4_state_manager Commit 76db6d9500caeaa774a3e32a997eba30bbdc176b (nfs41: add session setup to the state manager) introduces an infinite loop possibility in the NFSv4 state manager. By first checking nfs4_has_session() before clearing the NFS4CLNT_SESSION_SETUP flag, it allows for a situation where someone sets that flag, but it never gets cleared, and so the state manager loops. In fact commit c3fad1b1aaf850bf692642642ace7cd0d64af0a3 (nfs41: add session reset to state manager) causes this to happen every time we get a network partition error. Signed-off-by: Trond Myklebust Tested-by: Daniel J Blueman Signed-off-by: Linus Torvalds --- fs/nfs/nfs4state.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 65ca8c18476f..1434080aefeb 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1250,8 +1250,8 @@ static void nfs4_state_manager(struct nfs_client *clp) continue; } /* Initialize or reset the session */ - if (nfs4_has_session(clp) && - test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state)) { + if (test_and_clear_bit(NFS4CLNT_SESSION_SETUP, &clp->cl_state) + && nfs4_has_session(clp)) { if (clp->cl_cons_state == NFS_CS_SESSION_INITING) status = nfs4_initialize_session(clp); else From a2cb6a4dd470d7a64255a10b843b0d188416b78f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Aug 2009 19:37:05 -0700 Subject: [PATCH 295/338] pkt_sched: Fix bogon in tasklet_hrtimer changes. Reported by Stephen Rothwell, luckily it's harmless: net/sched/sch_api.c: In function 'qdisc_watchdog': net/sched/sch_api.c:460: warning: initialization from incompatible pointer type net/sched/sch_cbq.c: In function 'cbq_undelay': net/sched/sch_cbq.c:595: warning: initialization from incompatible pointer type Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 +- net/sched/sch_cbq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index e1c2bf7e9ba4..92e6f3a52c13 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -458,7 +458,7 @@ EXPORT_SYMBOL(qdisc_warn_nonwc); static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer) { struct qdisc_watchdog *wd = container_of(timer, struct qdisc_watchdog, - timer); + timer.timer); wd->qdisc->flags &= ~TCQ_F_THROTTLED; __netif_schedule(qdisc_root(wd->qdisc)); diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 81652d6ccd36..149b0405c5ec 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -593,7 +593,7 @@ static psched_tdiff_t cbq_undelay_prio(struct cbq_sched_data *q, int prio, static enum hrtimer_restart cbq_undelay(struct hrtimer *timer) { struct cbq_sched_data *q = container_of(timer, struct cbq_sched_data, - delay_timer); + delay_timer.timer); struct Qdisc *sch = q->watchdog.qdisc; psched_time_t now; psched_tdiff_t delay = 0; From b1ddaf681e362ed453182ddee1699d7487069a16 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 25 Aug 2009 08:15:41 +0200 Subject: [PATCH 296/338] sound: pcm_lib: fix unsorted list constraint handling snd_interval_list() expected a sorted list but did not document this, so there are drivers that give it an unsorted list. To fix this, change the algorithm to work with any list. This fixes the "Slave PCM not usable" error with USB devices that have multiple alternate settings with sample rates in decreasing order, such as the Philips Askey VC010 WebCam. http://bugzilla.kernel.org/show_bug.cgi?id=14028 Reported-and-tested-by: Andrzej Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 39 ++++++++------------------------------- 1 file changed, 8 insertions(+), 31 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 333e4dd29450..d8a7bb28cd83 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -909,47 +909,24 @@ static int snd_interval_ratden(struct snd_interval *i, int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask) { unsigned int k; - int changed = 0; + struct snd_interval list_range; if (!count) { i->empty = 1; return -EINVAL; } + snd_interval_any(&list_range); + list_range.min = UINT_MAX; + list_range.max = 0; for (k = 0; k < count; k++) { if (mask && !(mask & (1 << k))) continue; - if (i->min == list[k] && !i->openmin) - goto _l1; - if (i->min < list[k]) { - i->min = list[k]; - i->openmin = 0; - changed = 1; - goto _l1; - } - } - i->empty = 1; - return -EINVAL; - _l1: - for (k = count; k-- > 0;) { - if (mask && !(mask & (1 << k))) + if (!snd_interval_test(i, list[k])) continue; - if (i->max == list[k] && !i->openmax) - goto _l2; - if (i->max > list[k]) { - i->max = list[k]; - i->openmax = 0; - changed = 1; - goto _l2; - } + list_range.min = min(list_range.min, list[k]); + list_range.max = max(list_range.max, list[k]); } - i->empty = 1; - return -EINVAL; - _l2: - if (snd_interval_checkempty(i)) { - i->empty = 1; - return -EINVAL; - } - return changed; + return snd_interval_refine(i, &list_range); } EXPORT_SYMBOL(snd_interval_list); From c62e43202e7cf50ca24bce58b255df7bf5de69d0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 25 Aug 2009 14:50:53 +0100 Subject: [PATCH 297/338] x86: Fix build with older binutils and consolidate linker script binutils prior to 2.17 can't deal with the currently possible situation of a new segment following the per-CPU segment, but that new segment being empty - objcopy misplaces the .bss (and perhaps also the .brk) sections outside of any segment. However, the current ordering of sections really just appears to be the effect of cumulative unrelated changes; re-ordering things allows to easily guarantee that the segment following the per-CPU one is non-empty, and at once eliminates the need for the bogus data.init2 segment. Once touching this code, also use the various data section helper macros from include/asm-generic/vmlinux.lds.h. -v2: fix !SMP builds. Signed-off-by: Jan Beulich Cc: LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/vmlinux.lds.S | 140 +++++++++++++--------------------- 1 file changed, 54 insertions(+), 86 deletions(-) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 78d185d797de..9fc178255c04 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -46,11 +46,10 @@ PHDRS { data PT_LOAD FLAGS(7); /* RWE */ #ifdef CONFIG_X86_64 user PT_LOAD FLAGS(7); /* RWE */ - data.init PT_LOAD FLAGS(7); /* RWE */ #ifdef CONFIG_SMP percpu PT_LOAD FLAGS(7); /* RWE */ #endif - data.init2 PT_LOAD FLAGS(7); /* RWE */ + init PT_LOAD FLAGS(7); /* RWE */ #endif note PT_NOTE FLAGS(0); /* ___ */ } @@ -103,65 +102,43 @@ SECTIONS __stop___ex_table = .; } :text = 0x9090 - RODATA + RO_DATA(PAGE_SIZE) /* Data */ - . = ALIGN(PAGE_SIZE); .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Start of data section */ _sdata = .; + + /* init_task */ + INIT_TASK_DATA(THREAD_SIZE) + +#ifdef CONFIG_X86_32 + /* 32 bit has nosave before _edata */ + NOSAVE_DATA +#endif + + PAGE_ALIGNED_DATA(PAGE_SIZE) + *(.data.idt) + + CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES) + DATA_DATA CONSTRUCTORS - } :data -#ifdef CONFIG_X86_32 - /* 32 bit has nosave before _edata */ - . = ALIGN(PAGE_SIZE); - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } -#endif - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { - *(.data.page_aligned) - *(.data.idt) - } - -#ifdef CONFIG_X86_32 - . = ALIGN(32); -#else - . = ALIGN(PAGE_SIZE); - . = ALIGN(CONFIG_X86_L1_CACHE_BYTES); -#endif - .data.cacheline_aligned : - AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { - *(.data.cacheline_aligned) - } - - /* rarely changed data like cpu maps */ -#ifdef CONFIG_X86_32 - . = ALIGN(32); -#else - . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES); -#endif - .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) { - *(.data.read_mostly) + /* rarely changed data like cpu maps */ + READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES) /* End of data section */ _edata = .; - } + } :data #ifdef CONFIG_X86_64 #define VSYSCALL_ADDR (-10*1024*1024) -#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \ - SIZEOF(.data.read_mostly) + 4095) & ~(4095)) -#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \ - SIZEOF(.data.read_mostly) + 4095) & ~(4095)) +#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \ + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) +#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \ + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) #define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR) #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET) @@ -227,35 +204,29 @@ SECTIONS #endif /* CONFIG_X86_64 */ - /* init_task */ - . = ALIGN(THREAD_SIZE); - .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { - *(.data.init_task) - } -#ifdef CONFIG_X86_64 - :data.init -#endif - - /* - * smp_locks might be freed after init - * start/end must be page aligned - */ - . = ALIGN(PAGE_SIZE); - .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { - __smp_locks = .; - *(.smp_locks) - __smp_locks_end = .; - . = ALIGN(PAGE_SIZE); - } - /* Init code and data - will be freed after init */ . = ALIGN(PAGE_SIZE); - .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { + .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) { __init_begin = .; /* paired with __init_end */ + } + +#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - .init.text - should + * start another segment - init. + */ + PERCPU_VADDR(0, :percpu) +#endif + + .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { _sinittext = .; INIT_TEXT _einittext = .; } +#ifdef CONFIG_X86_64 + :init +#endif .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA @@ -326,17 +297,7 @@ SECTIONS } #endif -#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) - /* - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the - * output PHDR, so the next output section - __data_nosave - should - * start another section data.init2. Also, pda should be at the head of - * percpu area. Preallocate it and define the percpu offset symbol - * so that it can be accessed as a percpu variable. - */ - . = ALIGN(PAGE_SIZE); - PERCPU_VADDR(0, :percpu) -#else +#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) PERCPU(PAGE_SIZE) #endif @@ -347,15 +308,22 @@ SECTIONS __init_end = .; } + /* + * smp_locks might be freed after init + * start/end must be page aligned + */ + . = ALIGN(PAGE_SIZE); + .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) { + __smp_locks = .; + *(.smp_locks) + __smp_locks_end = .; + . = ALIGN(PAGE_SIZE); + } + #ifdef CONFIG_X86_64 .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { - . = ALIGN(PAGE_SIZE); - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - } :data.init2 - /* use another section data.init2, see PERCPU_VADDR() above */ + NOSAVE_DATA + } #endif /* BSS */ From 5c58ceff103d8a654f24769bb1baaf84a841b0cc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 25 Aug 2009 09:12:43 -0700 Subject: [PATCH 298/338] tty: make sure to flush any pending work when halting the ldisc When I rewrote tty ldisc code to use proper reference counts (commits 65b770468e98 and cbe9352fa08f) in order to avoid a race with hangup, the test-program that Eric Biederman used to trigger the original problem seems to have exposed another long-standing bug: the hangup code did the 'tty_ldisc_halt()' to stop any buffer flushing activity, but unlike the other call sites it never actually flushed any pending work. As a result, if you get just the right timing, the pending work may be just about to execute (ie the timer has already triggered and thus cancel_delayed_work() was a no-op), when we then re-initialize the ldisc from under it. That, in turn, results in various random problems, usually seen as a NULL pointer dereference in run_timer_softirq() or a BUG() in worker_thread (but it can be almost anything). Fix it by adding the required 'flush_scheduled_work()' after doing the tty_ldisc_halt() (this also requires us to move the ldisc halt to before taking the ldisc mutex in order to avoid a deadlock with the workqueue executing do_tty_hangup, which requires the mutex). The locking should be cleaned up one day (the requirement to do this outside the ldisc_mutex is very annoying, and weakens the lock), but that's a larger and separate undertaking. Reported-by: Eric W. Biederman Tested-by: Xiaotian Feng Tested-by: Yanmin Zhang Tested-by: Dave Young Cc: Frederic Weisbecker Cc: Greg Kroah-Hartman Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 1733d3439ad2..e48af9f79219 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -508,8 +508,9 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) * be obtained while the delayed work queue halt ensures that no more * data is fed to the ldisc. * - * In order to wait for any existing references to complete see - * tty_ldisc_wait_idle. + * You need to do a 'flush_scheduled_work()' (outside the ldisc_mutex) + * in order to make sure any currently executing ldisc work is also + * flushed. */ static int tty_ldisc_halt(struct tty_struct *tty) @@ -753,11 +754,14 @@ void tty_ldisc_hangup(struct tty_struct *tty) * N_TTY. */ if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) { + /* Make sure the old ldisc is quiescent */ + tty_ldisc_halt(tty); + flush_scheduled_work(); + /* Avoid racing set_ldisc or tty_ldisc_release */ mutex_lock(&tty->ldisc_mutex); if (tty->ldisc) { /* Not yet closed */ /* Switch back to N_TTY */ - tty_ldisc_halt(tty); tty_ldisc_reinit(tty); /* At this point we have a closed ldisc and we want to reopen it. We could defer this to the next open but From d8ed1d43e17898761c7221014a15a4c7501d2ff3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 25 Aug 2009 16:47:46 -0700 Subject: [PATCH 299/338] sparc64: Validate linear D-TLB misses. When page alloc debugging is not enabled, we essentially accept any virtual address for linear kernel TLB misses. But with kgdb, kernel address probing, and other facilities we can try to access arbitrary crap. So, make sure the address we miss on will translate to physical memory that actually exists. In order to make this work we have to embed the valid address bitmap into the kernel image. And in order to make that less expensive we make an adjustment, in that the max physical memory address is decreased to "1 << 41", even on the chips that support a 42-bit physical address space. We can do this because bit 41 indicates "I/O space" and thus covers non-memory ranges. The result of this is that: 1) kpte_linear_bitmap shrinks from 2K to 1K in size 2) we need 64K more for the valid address bitmap We can't let the valid address bitmap be dynamically allocated once we start using it to validate TLB misses, otherwise we have crazy issues to deal with wrt. recursive TLB misses and such. If we're in a TLB miss it could be the deepest trap level that's legal inside of the cpu. So if we TLB miss referencing the bitmap, the cpu will be out of trap levels and enter RED state. To guard against out-of-range accesses to the bitmap, we have to check to make sure no bits in the physical address above bit 40 are set. We could export and use last_valid_pfn for this check, but that's just an unnecessary extra memory reference. On the plus side of all this, since we load all of these translations into the special 4MB mapping TSB, and we check the TSB first for TLB misses, there should be absolutely no real cost for these new checks in the TLB miss path. Reported-by: heyongli@gmail.com Signed-off-by: David S. Miller --- arch/sparc/include/asm/pgtable_64.h | 12 ++++++-- arch/sparc/kernel/ktlb.S | 42 +++++++++++++++++++++++++--- arch/sparc/mm/init_64.c | 43 ++++++++++++++++------------- arch/sparc/mm/init_64.h | 7 +++-- 4 files changed, 76 insertions(+), 28 deletions(-) diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index b049abf9902f..0ff92fa22064 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -726,11 +726,17 @@ extern unsigned long pte_file(pte_t); extern pte_t pgoff_to_pte(unsigned long); #define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL) -extern unsigned long *sparc64_valid_addr_bitmap; +extern unsigned long sparc64_valid_addr_bitmap[]; /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) \ - (test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap)) +static inline bool kern_addr_valid(unsigned long addr) +{ + unsigned long paddr = __pa(addr); + + if ((paddr >> 41UL) != 0UL) + return false; + return test_bit(paddr >> 22, sparc64_valid_addr_bitmap); +} extern int page_in_phys_avail(unsigned long paddr); diff --git a/arch/sparc/kernel/ktlb.S b/arch/sparc/kernel/ktlb.S index cef8defcd7a9..3ea6e8cde8c5 100644 --- a/arch/sparc/kernel/ktlb.S +++ b/arch/sparc/kernel/ktlb.S @@ -151,12 +151,46 @@ kvmap_dtlb_4v: * Must preserve %g1 and %g6 (TAG). */ kvmap_dtlb_tsb4m_miss: - sethi %hi(kpte_linear_bitmap), %g2 + /* Clear the PAGE_OFFSET top virtual bits, shift + * down to get PFN, and make sure PFN is in range. + */ + sllx %g4, 21, %g5 + + /* Check to see if we know about valid memory at the 4MB + * chunk this physical address will reside within. + */ + srlx %g5, 21 + 41, %g2 + brnz,pn %g2, kvmap_dtlb_longpath + nop + + /* This unconditional branch and delay-slot nop gets patched + * by the sethi sequence once the bitmap is properly setup. + */ + .globl valid_addr_bitmap_insn +valid_addr_bitmap_insn: + ba,pt %xcc, 2f + nop + .subsection 2 + .globl valid_addr_bitmap_patch +valid_addr_bitmap_patch: + sethi %hi(sparc64_valid_addr_bitmap), %g7 + or %g7, %lo(sparc64_valid_addr_bitmap), %g7 + .previous + + srlx %g5, 21 + 22, %g2 + srlx %g2, 6, %g5 + and %g2, 63, %g2 + sllx %g5, 3, %g5 + ldx [%g7 + %g5], %g5 + mov 1, %g7 + sllx %g7, %g2, %g7 + andcc %g5, %g7, %g0 + be,pn %xcc, kvmap_dtlb_longpath + +2: sethi %hi(kpte_linear_bitmap), %g2 or %g2, %lo(kpte_linear_bitmap), %g2 - /* Clear the PAGE_OFFSET top virtual bits, then shift - * down to get a 256MB physical address index. - */ + /* Get the 256MB physical address index. */ sllx %g4, 21, %g5 mov 1, %g7 srlx %g5, 21 + 28, %g5 diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index ed6be6ba2f4e..a70a5e1904d9 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -145,7 +145,8 @@ static void __init read_obp_memory(const char *property, cmp_p64, NULL); } -unsigned long *sparc64_valid_addr_bitmap __read_mostly; +unsigned long sparc64_valid_addr_bitmap[VALID_ADDR_BITMAP_BYTES / + sizeof(unsigned long)]; EXPORT_SYMBOL(sparc64_valid_addr_bitmap); /* Kernel physical address base and size in bytes. */ @@ -1874,7 +1875,7 @@ static int pavail_rescan_ents __initdata; * memory list again, and make sure it provides at least as much * memory as 'pavail' does. */ -static void __init setup_valid_addr_bitmap_from_pavail(void) +static void __init setup_valid_addr_bitmap_from_pavail(unsigned long *bitmap) { int i; @@ -1897,8 +1898,7 @@ static void __init setup_valid_addr_bitmap_from_pavail(void) if (new_start <= old_start && new_end >= (old_start + PAGE_SIZE)) { - set_bit(old_start >> 22, - sparc64_valid_addr_bitmap); + set_bit(old_start >> 22, bitmap); goto do_next_page; } } @@ -1919,20 +1919,21 @@ static void __init setup_valid_addr_bitmap_from_pavail(void) } } +static void __init patch_tlb_miss_handler_bitmap(void) +{ + extern unsigned int valid_addr_bitmap_insn[]; + extern unsigned int valid_addr_bitmap_patch[]; + + valid_addr_bitmap_insn[1] = valid_addr_bitmap_patch[1]; + mb(); + valid_addr_bitmap_insn[0] = valid_addr_bitmap_patch[0]; + flushi(&valid_addr_bitmap_insn[0]); +} + void __init mem_init(void) { unsigned long codepages, datapages, initpages; unsigned long addr, last; - int i; - - i = last_valid_pfn >> ((22 - PAGE_SHIFT) + 6); - i += 1; - sparc64_valid_addr_bitmap = (unsigned long *) alloc_bootmem(i << 3); - if (sparc64_valid_addr_bitmap == NULL) { - prom_printf("mem_init: Cannot alloc valid_addr_bitmap.\n"); - prom_halt(); - } - memset(sparc64_valid_addr_bitmap, 0, i << 3); addr = PAGE_OFFSET + kern_base; last = PAGE_ALIGN(kern_size) + addr; @@ -1941,15 +1942,19 @@ void __init mem_init(void) addr += PAGE_SIZE; } - setup_valid_addr_bitmap_from_pavail(); + setup_valid_addr_bitmap_from_pavail(sparc64_valid_addr_bitmap); + patch_tlb_miss_handler_bitmap(); high_memory = __va(last_valid_pfn << PAGE_SHIFT); #ifdef CONFIG_NEED_MULTIPLE_NODES - for_each_online_node(i) { - if (NODE_DATA(i)->node_spanned_pages != 0) { - totalram_pages += - free_all_bootmem_node(NODE_DATA(i)); + { + int i; + for_each_online_node(i) { + if (NODE_DATA(i)->node_spanned_pages != 0) { + totalram_pages += + free_all_bootmem_node(NODE_DATA(i)); + } } } #else diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index 16063870a489..c2f772dbd556 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -5,10 +5,13 @@ * marked non-static so that assembler code can get at them. */ -#define MAX_PHYS_ADDRESS (1UL << 42UL) -#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) +#define MAX_PHYS_ADDRESS (1UL << 41UL) +#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) #define KPTE_BITMAP_BYTES \ ((MAX_PHYS_ADDRESS / KPTE_BITMAP_CHUNK_SZ) / 8) +#define VALID_ADDR_BITMAP_CHUNK_SZ (4UL * 1024UL * 1024UL) +#define VALID_ADDR_BITMAP_BYTES \ + ((MAX_PHYS_ADDRESS / VALID_ADDR_BITMAP_CHUNK_SZ) / 8) extern unsigned long kern_linear_pte_xor[2]; extern unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; From 730a9cfc2dcead5538c0c96a046000d97140b0c0 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 25 Aug 2009 20:39:18 -0700 Subject: [PATCH 300/338] irda/au1k_ir: fix broken netdev_ops conversion This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for au1k_ir. Untested. Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/irda/au1k_ir.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index c4361d466597..ee1cff5c9b21 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -205,9 +204,6 @@ static const struct net_device_ops au1k_irda_netdev_ops = { .ndo_start_xmit = au1k_irda_hard_xmit, .ndo_tx_timeout = au1k_tx_timeout, .ndo_do_ioctl = au1k_irda_ioctl, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, }; static int au1k_irda_net_init(struct net_device *dev) From 4484b9c8b4976acee181d377f8ba571109d1a2be Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 25 Aug 2009 20:39:37 -0700 Subject: [PATCH 301/338] irda/sa1100_ir: fix broken netdev_ops conversion This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for sa1100_ir. Untested. Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/irda/sa1100_ir.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index 2aeb2e6aec1b..b039cb081e94 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -881,9 +880,6 @@ static const struct net_device_ops sa1100_irda_netdev_ops = { .ndo_stop = sa1100_irda_stop, .ndo_start_xmit = sa1100_irda_hard_xmit, .ndo_do_ioctl = sa1100_irda_ioctl, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, }; static int sa1100_irda_probe(struct platform_device *pdev) From 0b4f2928f14c4a9770b0866923fc81beb7f4aa57 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 26 Aug 2009 12:03:35 -0700 Subject: [PATCH 302/338] smc91x: fix compilation on SMP Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 9da1fa12a67c..7567f510eff5 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -531,7 +531,7 @@ static inline void smc_rcv(struct net_device *dev) local_irq_restore(flags); \ __ret; \ }) -#define smc_special_lock(lock, flags) spin_lock_irq(lock, flags) +#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags) #define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags) #else #define smc_special_trylock(lock, flags) (1) From 3161e453e496eb5643faad30fff5a5ab183da0fe Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 26 Aug 2009 12:22:32 -0700 Subject: [PATCH 303/338] virtio: net refill on out-of-memory If we run out of memory, use keventd to fill the buffer. There's a report of this happening: "Page allocation failures in guest", Message-ID: <20090713115158.0a4892b0@mjolnir.ossman.eu> Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 61 ++++++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 15 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 2a6e81d5b579..bbedf03a2124 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -70,6 +70,9 @@ struct virtnet_info struct sk_buff_head recv; struct sk_buff_head send; + /* Work struct for refilling if we run low on memory. */ + struct delayed_work refill; + /* Chain pages by the private ptr. */ struct page *pages; }; @@ -273,19 +276,22 @@ drop: dev_kfree_skb(skb); } -static void try_fill_recv_maxbufs(struct virtnet_info *vi) +static bool try_fill_recv_maxbufs(struct virtnet_info *vi, gfp_t gfp) { struct sk_buff *skb; struct scatterlist sg[2+MAX_SKB_FRAGS]; int num, err, i; + bool oom = false; sg_init_table(sg, 2+MAX_SKB_FRAGS); for (;;) { struct virtio_net_hdr *hdr; skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN); - if (unlikely(!skb)) + if (unlikely(!skb)) { + oom = true; break; + } skb_reserve(skb, NET_IP_ALIGN); skb_put(skb, MAX_PACKET_LEN); @@ -296,7 +302,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { skb_frag_t *f = &skb_shinfo(skb)->frags[i]; - f->page = get_a_page(vi, GFP_ATOMIC); + f->page = get_a_page(vi, gfp); if (!f->page) break; @@ -325,31 +331,35 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) if (unlikely(vi->num > vi->max)) vi->max = vi->num; vi->rvq->vq_ops->kick(vi->rvq); + return !oom; } -static void try_fill_recv(struct virtnet_info *vi) +/* Returns false if we couldn't fill entirely (OOM). */ +static bool try_fill_recv(struct virtnet_info *vi, gfp_t gfp) { struct sk_buff *skb; struct scatterlist sg[1]; int err; + bool oom = false; - if (!vi->mergeable_rx_bufs) { - try_fill_recv_maxbufs(vi); - return; - } + if (!vi->mergeable_rx_bufs) + return try_fill_recv_maxbufs(vi, gfp); for (;;) { skb_frag_t *f; skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN); - if (unlikely(!skb)) + if (unlikely(!skb)) { + oom = true; break; + } skb_reserve(skb, NET_IP_ALIGN); f = &skb_shinfo(skb)->frags[0]; - f->page = get_a_page(vi, GFP_ATOMIC); + f->page = get_a_page(vi, gfp); if (!f->page) { + oom = true; kfree_skb(skb); break; } @@ -373,6 +383,7 @@ static void try_fill_recv(struct virtnet_info *vi) if (unlikely(vi->num > vi->max)) vi->max = vi->num; vi->rvq->vq_ops->kick(vi->rvq); + return !oom; } static void skb_recv_done(struct virtqueue *rvq) @@ -385,6 +396,23 @@ static void skb_recv_done(struct virtqueue *rvq) } } +static void refill_work(struct work_struct *work) +{ + struct virtnet_info *vi; + bool still_empty; + + vi = container_of(work, struct virtnet_info, refill.work); + napi_disable(&vi->napi); + try_fill_recv(vi, GFP_KERNEL); + still_empty = (vi->num == 0); + napi_enable(&vi->napi); + + /* In theory, this can happen: if we don't get any buffers in + * we will *never* try to fill again. */ + if (still_empty) + schedule_delayed_work(&vi->refill, HZ/2); +} + static int virtnet_poll(struct napi_struct *napi, int budget) { struct virtnet_info *vi = container_of(napi, struct virtnet_info, napi); @@ -400,10 +428,10 @@ again: received++; } - /* FIXME: If we oom and completely run out of inbufs, we need - * to start a timer trying to fill more. */ - if (vi->num < vi->max / 2) - try_fill_recv(vi); + if (vi->num < vi->max / 2) { + if (!try_fill_recv(vi, GFP_ATOMIC)) + schedule_delayed_work(&vi->refill, 0); + } /* Out of packets? */ if (received < budget) { @@ -893,6 +921,7 @@ static int virtnet_probe(struct virtio_device *vdev) vi->vdev = vdev; vdev->priv = vi; vi->pages = NULL; + INIT_DELAYED_WORK(&vi->refill, refill_work); /* If they give us a callback when all buffers are done, we don't need * the timer. */ @@ -941,7 +970,7 @@ static int virtnet_probe(struct virtio_device *vdev) } /* Last of all, set up some receive buffers. */ - try_fill_recv(vi); + try_fill_recv(vi, GFP_KERNEL); /* If we didn't even get one input buffer, we're useless. */ if (vi->num == 0) { @@ -958,6 +987,7 @@ static int virtnet_probe(struct virtio_device *vdev) unregister: unregister_netdev(dev); + cancel_delayed_work_sync(&vi->refill); free_vqs: vdev->config->del_vqs(vdev); free: @@ -986,6 +1016,7 @@ static void virtnet_remove(struct virtio_device *vdev) BUG_ON(vi->num != 0); unregister_netdev(vi->dev); + cancel_delayed_work_sync(&vi->refill); vdev->config->del_vqs(vi->vdev); From dac9ff79a8122b30176e23359bb879b3144d7f1f Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 17 Jun 2009 13:13:56 -0700 Subject: [PATCH 304/338] m68k: count can reach 51, not 50 With while (count++ < 50) { ... } count can reach 51, not 50, so we shouldn't give an error message on a count of 50. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Roel Kluin Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Geert Uytterhoeven --- drivers/macintosh/via-maciisi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c index 4d686c0bdea0..9ab5b0c34f0d 100644 --- a/drivers/macintosh/via-maciisi.c +++ b/drivers/macintosh/via-maciisi.c @@ -288,7 +288,7 @@ static void maciisi_sync(struct adb_request *req) } /* This could be BAD... when the ADB controller doesn't respond * for this long, it's probably not coming back :-( */ - if(count >= 50) /* Hopefully shouldn't happen */ + if (count > 50) /* Hopefully shouldn't happen */ printk(KERN_ERR "maciisi_send_request: poll timed out!\n"); } From dd9b3e84f2095ed19582f4df5d20e1e40c01ca3c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 17 Jun 2009 13:13:57 -0700 Subject: [PATCH 305/338] m68k: cnt reaches -1, not 0 With the postfix decrement cnt reaches -1 rather than 0. Signed-off-by: Roel Kluin Cc: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Geert Uytterhoeven --- arch/m68k/amiga/config.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index 6e562751ad51..6c74751c7b82 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -574,10 +574,11 @@ static int a2000_hwclk(int op, struct rtc_time *t) tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD; - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) { + while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; udelay(70); tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; + --cnt; } if (!cnt) @@ -649,10 +650,11 @@ static int amiga_set_clock_mmss(unsigned long nowtime) tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) { + while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; udelay(70); tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; + --cnt; } if (!cnt) From dc71c7d5dbd8cd8bb6e3b548ddc0454b64ded5f8 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 17 Jun 2009 13:13:58 -0700 Subject: [PATCH 306/338] arch/m68k/include/asm/motorola_pgalloc.h: fix kunmap arg arch/m68k/include/asm/motorola_pgalloc.h: In function 'pte_alloc_one': arch/m68k/include/asm/motorola_pgalloc.h:44: warning: passing argument 1 of 'kunmap' from incompatible pointer type Also, remove unneeded test for kmap() failure. Signed-off-by: Andrew Morton Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/motorola_pgalloc.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index 15ee4c74a9f0..2f02f264e694 100644 --- a/arch/m68k/include/asm/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h @@ -36,12 +36,10 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addres return NULL; pte = kmap(page); - if (pte) { - __flush_page_to_ram(pte); - flush_tlb_kernel_page(pte); - nocache_page(pte); - } - kunmap(pte); + __flush_page_to_ram(pte); + flush_tlb_kernel_page(pte); + nocache_page(pte); + kunmap(page); pgtable_page_ctor(page); return page; } From 9fd926b4ab1e38ac5e3eb3ba0afb56726d90aa88 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 9 Jul 2009 17:08:38 +0400 Subject: [PATCH 307/338] m68k: Fix redefinition of pgprot_noncached arch/m68k/include/asm/pgtable_mm.h:148:1: warning: "pgprot_noncached" redefined In file included from arch/m68k/include/asm/pgtable_mm.h:138, from arch/m68k/include/asm/pgtable.h:4, from include/linux/mm.h:40, from include/linux/pagemap.h:7, from include/linux/blkdev.h:12, from arch/m68k/emu/nfblock.c:17: include/asm-generic/pgtable.h:133:1: warning: this is the location of the previous definition pgprot_noncached() should be defined _before_ including asm-generic/pgtable.h Signed-off-by: Alexey Dobriyan Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/pgtable_mm.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 0b604f0f192d..fe60e1abaee8 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -135,8 +135,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, #endif #ifndef __ASSEMBLY__ -#include - /* * Macro to mark a page protection value as "uncacheable". */ @@ -154,6 +152,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S)) \ : (prot))) +#include #endif /* !__ASSEMBLY__ */ /* From 9848484fad9ddeb18f18f02f9ecdcd330ac9a216 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 21 Aug 2009 22:03:54 +0200 Subject: [PATCH 308/338] m68k,m68knommu: Wire up rt_tgsigqueueinfo and perf_counter_open Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/entry.S | 2 ++ arch/m68knommu/kernel/syscalltable.S | 2 ++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index aa29a8640f74..946d8691f2b0 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -334,10 +334,12 @@ #define __NR_inotify_init1 328 #define __NR_preadv 329 #define __NR_pwritev 330 +#define __NR_rt_tgsigqueueinfo 331 +#define __NR_perf_counter_open 332 #ifdef __KERNEL__ -#define NR_syscalls 331 +#define NR_syscalls 333 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 8744f60c07a9..c3735cd6207e 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -755,4 +755,6 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 330 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index c0b8782832fd..0ae123e08985 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -349,6 +349,8 @@ ENTRY(sys_call_table) .long sys_inotify_init1 .long sys_preadv .long sys_pwritev /* 330 */ + .long sys_rt_tgsigqueueinfo + .long sys_perf_counter_open .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall From 53a7197aff20e341487fca8575275056fe1c63e5 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 26 Aug 2009 14:56:48 -0400 Subject: [PATCH 309/338] IMA: iint put in ima_counts_get and put ima_counts_get() calls ima_iint_find_insert_get() which takes a reference to the iint in question, but does not put that reference at the end of the function. This can lead to a nasty memory leak. Easy enough to reproduce: #include #include int main (void) { int i; void *ptr; for (i=0; i < 100000; i++) { ptr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_ANONYMOUS, -1, 0); if (ptr == MAP_FAILED) return 2; munmap(ptr, 4096); } return 0; } Signed-off-by: Eric Paris Signed-off-by: James Morris --- security/integrity/ima/ima_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c index 101c512564ec..4732f5e5d127 100644 --- a/security/integrity/ima/ima_main.c +++ b/security/integrity/ima/ima_main.c @@ -262,6 +262,8 @@ void ima_counts_put(struct path *path, int mask) else if (mask & (MAY_READ | MAY_EXEC)) iint->readcount--; mutex_unlock(&iint->mutex); + + kref_put(&iint->refcount, iint_free); } /* @@ -291,6 +293,8 @@ void ima_counts_get(struct file *file) if (file->f_mode & FMODE_WRITE) iint->writecount++; mutex_unlock(&iint->mutex); + + kref_put(&iint->refcount, iint_free); } EXPORT_SYMBOL_GPL(ima_counts_get); From 054b2b13ccba4876a1ce98a7ede7dab7d6893d01 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Wed, 26 Aug 2009 14:29:18 -0700 Subject: [PATCH 310/338] pps: fix incorrect verdict check Fix incorrect verdict check and returns error if device_create failed, otherwise driver triggers kernel oops. Signed-off-by: Joonwoo Park Cc: Rodolfo Giometti Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/pps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index ac8cc8cea1e3..fea17e7805e9 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -244,7 +244,7 @@ int pps_register_cdev(struct pps_device *pps) } pps->dev = device_create(pps_class, pps->info.dev, pps->devno, NULL, "pps%d", pps->id); - if (err) + if (IS_ERR(pps->dev)) goto del_cdev; dev_set_drvdata(pps->dev, pps); From a30b595d2ca6d39e784a1bed5f2b35f3d7a03af7 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 26 Aug 2009 14:29:20 -0700 Subject: [PATCH 311/338] flex_array: fix get function for elements in base starting at non-zero If all array elements fit into the base structure and data is copied using flex_array_put() starting at a non-zero index, flex_array_get() will fail to return the data. This fixes the bug by only checking for NULL parts when all elements do not fit in the base structure when flex_array_get() is used. Otherwise, fa_element_to_part_nr() will always be 0 since there are no parts structures needed and such element may never have been put. Thus, it will remain NULL due to the kzalloc() of the base. Additionally, flex_array_put() now only checks for a NULL part when all elements do not fit in the base structure. This is otherwise unnecessary since the base structure is guaranteed to exist (or we would have already hit a NULL pointer). Signed-off-by: David Rientjes Acked-by: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/flex_array.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/lib/flex_array.c b/lib/flex_array.c index 08f1636d296a..e73c691aec36 100644 --- a/lib/flex_array.c +++ b/lib/flex_array.c @@ -198,10 +198,11 @@ int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags return -ENOSPC; if (elements_fit_in_base(fa)) part = (struct flex_array_part *)&fa->parts[0]; - else + else { part = __fa_get_part(fa, part_nr, flags); - if (!part) - return -ENOMEM; + if (!part) + return -ENOMEM; + } dst = &part->elements[index_inside_part(fa, element_nr)]; memcpy(dst, src, fa->element_size); return 0; @@ -257,11 +258,12 @@ void *flex_array_get(struct flex_array *fa, int element_nr) if (element_nr >= fa->total_nr_elements) return NULL; - if (!fa->parts[part_nr]) - return NULL; if (elements_fit_in_base(fa)) part = (struct flex_array_part *)&fa->parts[0]; - else + else { part = fa->parts[part_nr]; + if (!part) + return NULL; + } return &part->elements[index_inside_part(fa, element_nr)]; } From 105b6e8a74cac11cdf70903877593c7f202075cc Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 26 Aug 2009 14:29:20 -0700 Subject: [PATCH 312/338] flex_array: fix flex_array_free_parts comment flex_array_free_parts() does not take `src' or `element_nr' formals, so remove their respective comments. Signed-off-by: David Rientjes Acked-by: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/flex_array.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/lib/flex_array.c b/lib/flex_array.c index e73c691aec36..cf4e372cae90 100644 --- a/lib/flex_array.c +++ b/lib/flex_array.c @@ -122,9 +122,6 @@ static int fa_element_to_part_nr(struct flex_array *fa, int element_nr) /** * flex_array_free_parts - just free the second-level pages - * @src: address of data to copy into the array - * @element_nr: index of the position in which to insert - * the new element. * * This is to be used in cases where the base 'struct flex_array' * has been statically allocated and should not be free. From 8e7ee27095aee87b5db1b0061e2ceea5878a1bbd Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 26 Aug 2009 14:29:21 -0700 Subject: [PATCH 313/338] flex_array: declare parts member to have incomplete type The `parts' member of struct flex_array should evaluate to an incomplete type so that sizeof() cannot be used and C99 does not require the zero-length specification. Signed-off-by: David Rientjes Acked-by: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 23c1ec79a31b..603160db7c98 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -21,7 +21,7 @@ struct flex_array { struct { int element_size; int total_nr_elements; - struct flex_array_part *parts[0]; + struct flex_array_part *parts[]; }; /* * This little trick makes sure that From b62e408c05228f40e69bb38a48db8961cac6cd23 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 26 Aug 2009 14:29:22 -0700 Subject: [PATCH 314/338] flex_array: convert element_nr formals to unsigned It's problematic to allow signed element_nr's or total's to be passed as part of the flex array API. flex_array_alloc() allows total_nr_elements to be set to a negative quantity, which is obviously erroneous. flex_array_get() and flex_array_put() allows negative array indices in dereferencing an array part, which could address memory mapped before struct flex_array. The fix is to convert all existing element_nr formals to be qualified as unsigned. Existing checks to compare it to total_nr_elements or the max array size based on element_size need not be changed. Signed-off-by: David Rientjes Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/flex_array.h | 10 ++++++---- lib/flex_array.c | 24 +++++++++++++----------- 2 files changed, 19 insertions(+), 15 deletions(-) diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h index 603160db7c98..45ff18491514 100644 --- a/include/linux/flex_array.h +++ b/include/linux/flex_array.h @@ -36,12 +36,14 @@ struct flex_array { .total_nr_elements = (total), \ } } } -struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags); -int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags); +struct flex_array *flex_array_alloc(int element_size, unsigned int total, + gfp_t flags); +int flex_array_prealloc(struct flex_array *fa, unsigned int start, + unsigned int end, gfp_t flags); void flex_array_free(struct flex_array *fa); void flex_array_free_parts(struct flex_array *fa); -int flex_array_put(struct flex_array *fa, int element_nr, void *src, +int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, gfp_t flags); -void *flex_array_get(struct flex_array *fa, int element_nr); +void *flex_array_get(struct flex_array *fa, unsigned int element_nr); #endif /* _FLEX_ARRAY_H */ diff --git a/lib/flex_array.c b/lib/flex_array.c index cf4e372cae90..7baed2fc3bc8 100644 --- a/lib/flex_array.c +++ b/lib/flex_array.c @@ -99,7 +99,8 @@ static inline int elements_fit_in_base(struct flex_array *fa) * capacity in the base structure. Also note that no effort is made * to efficiently pack objects across page boundaries. */ -struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags) +struct flex_array *flex_array_alloc(int element_size, unsigned int total, + gfp_t flags) { struct flex_array *ret; int max_size = nr_base_part_ptrs() * __elements_per_part(element_size); @@ -115,7 +116,8 @@ struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags) return ret; } -static int fa_element_to_part_nr(struct flex_array *fa, int element_nr) +static int fa_element_to_part_nr(struct flex_array *fa, + unsigned int element_nr) { return element_nr / __elements_per_part(fa->element_size); } @@ -143,14 +145,12 @@ void flex_array_free(struct flex_array *fa) kfree(fa); } -static int fa_index_inside_part(struct flex_array *fa, int element_nr) +static unsigned int index_inside_part(struct flex_array *fa, + unsigned int element_nr) { - return element_nr % __elements_per_part(fa->element_size); -} + unsigned int part_offset; -static int index_inside_part(struct flex_array *fa, int element_nr) -{ - int part_offset = fa_index_inside_part(fa, element_nr); + part_offset = element_nr % __elements_per_part(fa->element_size); return part_offset * fa->element_size; } @@ -185,7 +185,8 @@ __fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags) * * Locking must be provided by the caller. */ -int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags) +int flex_array_put(struct flex_array *fa, unsigned int element_nr, void *src, + gfp_t flags) { int part_nr = fa_element_to_part_nr(fa, element_nr); struct flex_array_part *part; @@ -217,7 +218,8 @@ int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags * * Locking must be provided by the caller. */ -int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags) +int flex_array_prealloc(struct flex_array *fa, unsigned int start, + unsigned int end, gfp_t flags) { int start_part; int end_part; @@ -248,7 +250,7 @@ int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags) * * Locking must be provided by the caller. */ -void *flex_array_get(struct flex_array *fa, int element_nr) +void *flex_array_get(struct flex_array *fa, unsigned int element_nr) { int part_nr = fa_element_to_part_nr(fa, element_nr); struct flex_array_part *part; From 03ef83af528899aa339e42d8024b37e2f434fba4 Mon Sep 17 00:00:00 2001 From: Minchan Kim Date: Wed, 26 Aug 2009 14:29:23 -0700 Subject: [PATCH 315/338] mm: fix for infinite churning of mlocked pages An mlocked page might lose the isolatation race. This causes the page to clear PG_mlocked while it remains in a VM_LOCKED vma. This means it can be put onto the [in]active list. We can rescue it by using try_to_unmap() in shrink_page_list(). But now, As Wu Fengguang pointed out, vmscan has a bug. If the page has PG_referenced, it can't reach try_to_unmap() in shrink_page_list() but is put into the active list. If the page is referenced repeatedly, it can remain on the [in]active list without being moving to the unevictable list. This patch fixes it. Reported-by: Wu Fengguang Signed-off-by: Minchan Kim Reviewed-by: KOSAKI Motohiro < Cc: Lee Schermerhorn Acked-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/rmap.c | 1 + mm/vmscan.c | 9 +++++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/rmap.c b/mm/rmap.c index 836c6c63e1f2..0895b5c7cbff 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -358,6 +358,7 @@ static int page_referenced_one(struct page *page, */ if (vma->vm_flags & VM_LOCKED) { *mapcount = 1; /* break early from loop */ + *vm_flags |= VM_LOCKED; goto out_unmap; } diff --git a/mm/vmscan.c b/mm/vmscan.c index dea7abd31098..94e86dd6954c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -630,9 +630,14 @@ static unsigned long shrink_page_list(struct list_head *page_list, referenced = page_referenced(page, 1, sc->mem_cgroup, &vm_flags); - /* In active use or really unfreeable? Activate it. */ + /* + * In active use or really unfreeable? Activate it. + * If page which have PG_mlocked lost isoltation race, + * try_to_unmap moves it to unevictable list + */ if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && - referenced && page_mapping_inuse(page)) + referenced && page_mapping_inuse(page) + && !(vm_flags & VM_LOCKED)) goto activate_locked; /* From 4ab6c08336535f8c8e42cf45d7adeda882eff06e Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 26 Aug 2009 14:29:24 -0700 Subject: [PATCH 316/338] clone(): fix race between copy_process() and de_thread() Spotted by Hiroshi Shimamoto who also provided the test-case below. copy_process() uses signal->count as a reference counter, but it is not. This test case #include #include #include #include #include #include void *null_thread(void *p) { for (;;) sleep(1); return NULL; } void *exec_thread(void *p) { execl("/bin/true", "/bin/true", NULL); return null_thread(p); } int main(int argc, char **argv) { for (;;) { pid_t pid; int ret, status; pid = fork(); if (pid < 0) break; if (!pid) { pthread_t tid; pthread_create(&tid, NULL, exec_thread, NULL); for (;;) pthread_create(&tid, NULL, null_thread, NULL); } do { ret = waitpid(pid, &status, 0); } while (ret == -1 && errno == EINTR); } return 0; } quickly creates an unkillable task. If copy_process(CLONE_THREAD) races with de_thread() copy_signal()->atomic(signal->count) breaks the signal->notify_count logic, and the execing thread can hang forever in kernel space. Change copy_process() to increment count/live only when we know for sure we can't fail. In this case the forked thread will take care of its reference to signal correctly. If copy_process() fails, check CLONE_THREAD flag. If it it set - do nothing, the counters were not changed and current belongs to the same thread group. If it is not set, ->signal must be released in any case (and ->count must be == 1), the forked child is the only thread in the thread group. We need more cleanups here, in particular signal->count should not be used by de_thread/__exit_signal at all. This patch only fixes the bug. Reported-by: Hiroshi Shimamoto Tested-by: Hiroshi Shimamoto Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Cc: KAMEZAWA Hiroyuki Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/fork.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 144326b7af50..e6c04d462ab2 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -815,11 +815,8 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) { struct signal_struct *sig; - if (clone_flags & CLONE_THREAD) { - atomic_inc(¤t->signal->count); - atomic_inc(¤t->signal->live); + if (clone_flags & CLONE_THREAD) return 0; - } sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL); tsk->signal = sig; @@ -877,16 +874,6 @@ void __cleanup_signal(struct signal_struct *sig) kmem_cache_free(signal_cachep, sig); } -static void cleanup_signal(struct task_struct *tsk) -{ - struct signal_struct *sig = tsk->signal; - - atomic_dec(&sig->live); - - if (atomic_dec_and_test(&sig->count)) - __cleanup_signal(sig); -} - static void copy_flags(unsigned long clone_flags, struct task_struct *p) { unsigned long new_flags = p->flags; @@ -1239,6 +1226,8 @@ static struct task_struct *copy_process(unsigned long clone_flags, } if (clone_flags & CLONE_THREAD) { + atomic_inc(¤t->signal->count); + atomic_inc(¤t->signal->live); p->group_leader = current->group_leader; list_add_tail_rcu(&p->thread_group, &p->group_leader->thread_group); } @@ -1282,7 +1271,8 @@ bad_fork_cleanup_mm: if (p->mm) mmput(p->mm); bad_fork_cleanup_signal: - cleanup_signal(p); + if (!(clone_flags & CLONE_THREAD)) + __cleanup_signal(p->signal); bad_fork_cleanup_sighand: __cleanup_sighand(p->sighand); bad_fork_cleanup_fs: From 0d288162f2afc42b37aab656f4622c076babbca3 Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Wed, 26 Aug 2009 14:29:25 -0700 Subject: [PATCH 317/338] thermal_sys: check get_temp return value The return value of the get_temp function is not checked when doing a thermal zone update. This may lead to a critical shutdown if get_temp fails and the content of the temp variable is incorrectly set higher than the critical trip point. This has been observed on a system with incorrect ACPI implementation where the corresponding methods were not serialized and therefore sometimes triggered ACPI errors (AE_ALREADY_EXISTS). The following critical shutdowns indicated a temperature of 2097 C, which was obviously wrong. The patch adds a return value check that jumps over all trip point evaluations printing a warning if get_temp fails. The trip points are evaluated again on the next polling interval with successful get_temp execution. Signed-off-by: Michael Brunner Acked-by: Zhang Rui Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/thermal/thermal_sys.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 0a69672097a8..4e83c297ec9e 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -953,7 +953,12 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) mutex_lock(&tz->lock); - tz->ops->get_temp(tz, &temp); + if (tz->ops->get_temp(tz, &temp)) { + /* get_temp failed - retry it later */ + printk(KERN_WARNING PREFIX "failed to read out thermal zone " + "%d\n", tz->id); + goto leave; + } for (count = 0; count < tz->trips; count++) { tz->ops->get_trip_type(tz, count, &trip_type); @@ -1005,6 +1010,8 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) THERMAL_TRIPS_NONE); tz->last_temperature = temp; + + leave: if (tz->passive) thermal_zone_device_set_polling(tz, tz->passive_delay); else if (tz->polling_delay) From ce8442b55135c679809311997d1446f3bbc05de2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 26 Aug 2009 14:29:26 -0700 Subject: [PATCH 318/338] acpi: don't call acpi_processor_init if acpi is disabled Jens reported early_ioremap messages with old ASUS board... > [ 1.507461] pci 0000:00:09.0: Firmware left e100 interrupts enabled; disabling > [ 1.532778] early_ioremap(3fffd080, 0000005c) [0] => Pid: 1, comm: swapper Not tainted 2.6.31-rc4 #36 > [ 1.561007] Call Trace: > [ 1.568638] [] ? printk+0x18/0x1d > [ 1.581734] [] __early_ioremap+0x74/0x1e9 > [ 1.596898] [] early_ioremap+0x1a/0x1c > [ 1.611270] [] __acpi_map_table+0x18/0x1a > [ 1.626451] [] acpi_os_map_memory+0x1d/0x25 > [ 1.642129] [] acpi_tb_verify_table+0x20/0x49 > [ 1.658321] [] acpi_get_table_with_size+0x53/0xa1 > [ 1.675553] [] acpi_get_table+0x10/0x15 > [ 1.690192] [] acpi_processor_init+0x23/0xab > [ 1.706126] [] do_one_initcall+0x33/0x180 > [ 1.721279] [] ? acpi_processor_init+0x0/0xab > [ 1.737479] [] ? register_irq_proc+0xaa/0xc0 > [ 1.753411] [] ? init_irq_proc+0x67/0x80 > [ 1.768316] [] kernel_init+0x120/0x176 > [ 1.782678] [] ? kernel_init+0x0/0x176 > [ 1.797062] [] kernel_thread_helper+0x7/0x10 > [ 1.812984] 00000080 + ffe00000 that is rather later. acpi_gbl_permanent_mmap should be set in acpi_early_init() if acpi is not disabled and we have > [ 0.000000] ASUS P2B-DS detected: force use of acpi=ht just don't load acpi_processor_init... Reported-and-tested-by: Jens Rosenboom Signed-off-by: Yinghai Lu Acked-by: Ingo Molnar Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 84e0f3c07442..2cc4b3033872 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -1151,6 +1151,9 @@ static int __init acpi_processor_init(void) { int result = 0; + if (acpi_disabled) + return 0; + memset(&errata, 0, sizeof(errata)); #ifdef CONFIG_SMP @@ -1197,6 +1200,9 @@ out_proc: static void __exit acpi_processor_exit(void) { + if (acpi_disabled) + return; + acpi_processor_ppc_exit(); acpi_thermal_cpufreq_exit(); From f3d83e2415445e5b157bef404d38674e9e8de169 Mon Sep 17 00:00:00 2001 From: Costantino Leandro Date: Wed, 26 Aug 2009 14:29:28 -0700 Subject: [PATCH 319/338] wmi: fix kernel panic when stack protection enabled. Summary: Kernel panic arise when stack protection is enabled, since strncat will add a null terminating byte '\0'; So in functions like this one (wmi_query_block): char wc[4]="WC"; .... strncat(method, block->object_id, 2); ... the length of wc should be n+1 (wc[5]) or stack protection fault will arise. This is not noticeable when stack protection is disabled,but , isn't good either. Config used: [CONFIG_CC_STACKPROTECTOR_ALL=y, CONFIG_CC_STACKPROTECTOR=y] Panic Trace ------------ .... stack-protector: kernel stack corrupted in : fa7b182c 2.6.30-rc8-obelisco-generic call_trace: [] ? panic+0x45/0xd9 [] ? __stack_chk_fail+0x1c/0x40 [] ? wmi_query_block+0x15a/0x162 [wmi] [] ? wmi_query_block+0x15a/0x162 [wmi] [] ? acer_wmi_init+0x00/0x61a [acer_wmi] [] ? acer_wmi_init+0x135/0x61a [acer_wmi] [] ? do_one_initcall+0x50+0x126 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13514 Signed-off-by: Costantino Leandro Signed-off-by: Carlos Corbacho Cc: Len Brown Cc: Bjorn Helgaas Cc: "Rafael J. Wysocki" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/wmi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 043b208d971d..f215a5919192 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -270,7 +270,7 @@ u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) acpi_status status; struct acpi_object_list input; union acpi_object params[3]; - char method[4] = "WM"; + char method[5] = "WM"; if (!find_guid(guid_string, &wblock)) return AE_ERROR; @@ -328,8 +328,8 @@ struct acpi_buffer *out) acpi_status status, wc_status = AE_ERROR; struct acpi_object_list input, wc_input; union acpi_object wc_params[1], wq_params[1]; - char method[4]; - char wc_method[4] = "WC"; + char method[5]; + char wc_method[5] = "WC"; if (!guid_string || !out) return AE_BAD_PARAMETER; @@ -410,7 +410,7 @@ const struct acpi_buffer *in) acpi_handle handle; struct acpi_object_list input; union acpi_object params[2]; - char method[4] = "WS"; + char method[5] = "WS"; if (!guid_string || !in) return AE_BAD_DATA; From 2a908002c7b1b666616103e9df2419b38d7c6f1f Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Wed, 26 Aug 2009 14:29:29 -0700 Subject: [PATCH 320/338] ACPI processor: force throttling state when BIOS returns incorrect value If the BIOS reports an invalid throttling state (which seems to be fairly common after system boot), a reset is done to state T0. Because of a check in acpi_processor_get_throttling_ptc(), the reset never actually gets executed, which results in the error reoccurring on every access of for example /proc/acpi/processor/CPU0/throttling. Add a 'force' option to acpi_processor_set_throttling() to ensure the reset really takes effect. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 This patch, together with the next one, fixes a regression introduced in 2.6.30, listed on the regression list. They have been available for 2.5 months now in bugzilla, but have not been picked up, despite various reminders and without any reason given. Google shows that numerous people are hitting this issue. The issue is in itself relatively minor, but the bug in the code is clear. The patches have been in all my kernels and today testing has shown that throttling works correctly with the patches applied when the system overheats (http://bugzilla.kernel.org/show_bug.cgi?id=13918#c14). Signed-off-by: Frans Pop Acked-by: Zhang Rui Cc: Len Brown Cc: "Rafael J. Wysocki" Cc: Rusty Russell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_thermal.c | 6 +++--- drivers/acpi/processor_throttling.c | 26 ++++++++++++++------------ include/acpi/processor.h | 5 +++-- 3 files changed, 20 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index 39838c666032..31adda1099e0 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -66,7 +66,7 @@ static int acpi_processor_apply_limit(struct acpi_processor *pr) if (pr->limit.thermal.tx > tx) tx = pr->limit.thermal.tx; - result = acpi_processor_set_throttling(pr, tx); + result = acpi_processor_set_throttling(pr, tx, false); if (result) goto end; } @@ -421,12 +421,12 @@ processor_set_cur_state(struct thermal_cooling_device *cdev, if (state <= max_pstate) { if (pr->flags.throttling && pr->throttling.state) - result = acpi_processor_set_throttling(pr, 0); + result = acpi_processor_set_throttling(pr, 0, false); cpufreq_set_cur_state(pr->id, state); } else { cpufreq_set_cur_state(pr->id, max_pstate); result = acpi_processor_set_throttling(pr, - state - max_pstate); + state - max_pstate, false); } return result; } diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 227543789ba9..841be4ee2109 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -62,7 +62,8 @@ struct throttling_tstate { #define THROTTLING_POSTCHANGE (2) static int acpi_processor_get_throttling(struct acpi_processor *pr); -int acpi_processor_set_throttling(struct acpi_processor *pr, int state); +int acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force); static int acpi_processor_update_tsd_coord(void) { @@ -361,7 +362,7 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr) */ target_state = throttling_limit; } - return acpi_processor_set_throttling(pr, target_state); + return acpi_processor_set_throttling(pr, target_state, false); } /* @@ -842,7 +843,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) ACPI_WARNING((AE_INFO, "Invalid throttling state, reset")); state = 0; - ret = acpi_processor_set_throttling(pr, state); + ret = acpi_processor_set_throttling(pr, state, true); if (ret) return ret; } @@ -915,7 +916,7 @@ static int acpi_processor_get_fadt_info(struct acpi_processor *pr) } static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, - int state) + int state, bool force) { u32 value = 0; u32 duty_mask = 0; @@ -930,7 +931,7 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, if (!pr->flags.throttling) return -ENODEV; - if (state == pr->throttling.state) + if (!force && (state == pr->throttling.state)) return 0; if (state < pr->throttling_platform_limit) @@ -988,7 +989,7 @@ static int acpi_processor_set_throttling_fadt(struct acpi_processor *pr, } static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, - int state) + int state, bool force) { int ret; acpi_integer value; @@ -1002,7 +1003,7 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, if (!pr->flags.throttling) return -ENODEV; - if (state == pr->throttling.state) + if (!force && (state == pr->throttling.state)) return 0; if (state < pr->throttling_platform_limit) @@ -1018,7 +1019,8 @@ static int acpi_processor_set_throttling_ptc(struct acpi_processor *pr, return 0; } -int acpi_processor_set_throttling(struct acpi_processor *pr, int state) +int acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force) { cpumask_var_t saved_mask; int ret = 0; @@ -1070,7 +1072,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) /* FIXME: use work_on_cpu() */ set_cpus_allowed_ptr(current, cpumask_of(pr->id)); ret = p_throttling->acpi_processor_set_throttling(pr, - t_state.target_state); + t_state.target_state, force); } else { /* * When the T-state coordination is SW_ALL or HW_ALL, @@ -1103,7 +1105,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) set_cpus_allowed_ptr(current, cpumask_of(i)); ret = match_pr->throttling. acpi_processor_set_throttling( - match_pr, t_state.target_state); + match_pr, t_state.target_state, force); } } /* @@ -1201,7 +1203,7 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Disabling throttling (was T%d)\n", pr->throttling.state)); - result = acpi_processor_set_throttling(pr, 0); + result = acpi_processor_set_throttling(pr, 0, false); if (result) goto end; } @@ -1307,7 +1309,7 @@ static ssize_t acpi_processor_write_throttling(struct file *file, if (strcmp(tmpbuf, charp) != 0) return -EINVAL; - result = acpi_processor_set_throttling(pr, state_val); + result = acpi_processor_set_throttling(pr, state_val, false); if (result) return result; diff --git a/include/acpi/processor.h b/include/acpi/processor.h index baf1e0a9a7ee..740ac3ad8fd0 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -174,7 +174,7 @@ struct acpi_processor_throttling { cpumask_var_t shared_cpu_map; int (*acpi_processor_get_throttling) (struct acpi_processor * pr); int (*acpi_processor_set_throttling) (struct acpi_processor * pr, - int state); + int state, bool force); u32 address; u8 duty_offset; @@ -321,7 +321,8 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr) /* in processor_throttling.c */ int acpi_processor_tstate_has_changed(struct acpi_processor *pr); int acpi_processor_get_throttling_info(struct acpi_processor *pr); -extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state); +extern int acpi_processor_set_throttling(struct acpi_processor *pr, + int state, bool force); extern const struct file_operations acpi_processor_throttling_fops; extern void acpi_processor_throttling_init(void); /* in processor_idle.c */ From bdf57de4e6abc389cc3f3bd94ec15cce74cf6f4b Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Wed, 26 Aug 2009 14:29:30 -0700 Subject: [PATCH 321/338] acpi processor: remove superfluous warning message This failure is very common on many platforms. Handling it in the ACPI processor driver is enough, and we don't need a warning message unless CONFIG_ACPI_DEBUG is set. Based on a patch from Zhang Rui. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13389 Signed-off-by: Frans Pop Acked-by: Zhang Rui Cc: Len Brown Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_throttling.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 841be4ee2109..ae39797aab55 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -840,8 +840,8 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) if (ret >= 0) { state = acpi_get_throttling_state(pr, value); if (state == -1) { - ACPI_WARNING((AE_INFO, - "Invalid throttling state, reset")); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Invalid throttling state, reset\n")); state = 0; ret = acpi_processor_set_throttling(pr, state, true); if (ret) From 48cccd26f36511ddb6aeca07485ecf2829683907 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 26 Aug 2009 14:29:31 -0700 Subject: [PATCH 322/338] leds: fix multiple requests and releases of IRQ for GPIO LED Trigger When setting the same GPIO number, multiple IRQ shared requests will be done without freing the previous request. It will also try to free a failed request or an already freed IRQ if 0 was written to the gpio file. All these oops and leaks were fixed with the following solution: keep the previous allocated GPIO (if any) still allocated in case the new request fails. The alternative solution would desallocate the previous allocated GPIO and set gpio as 0. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Samuel R. C. Vale Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/ledtrig-gpio.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c index a247ae63374f..8183b81fca84 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/ledtrig-gpio.c @@ -146,20 +146,26 @@ static ssize_t gpio_trig_gpio_store(struct device *dev, return -EINVAL; } + if (gpio_data->gpio == gpio) + return n; + if (!gpio) { - free_irq(gpio_to_irq(gpio_data->gpio), led); + if (gpio_data->gpio != 0) + free_irq(gpio_to_irq(gpio_data->gpio), led); + gpio_data->gpio = 0; return n; } - if (gpio_data->gpio > 0 && gpio_data->gpio != gpio) - free_irq(gpio_to_irq(gpio_data->gpio), led); - - gpio_data->gpio = gpio; ret = request_irq(gpio_to_irq(gpio), gpio_trig_irq, IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "ledtrig-gpio", led); - if (ret) + if (ret) { dev_err(dev, "request_irq failed with error %d\n", ret); + } else { + if (gpio_data->gpio != 0) + free_irq(gpio_to_irq(gpio_data->gpio), led); + gpio_data->gpio = gpio; + } return ret ? ret : n; } @@ -211,7 +217,8 @@ static void gpio_trig_deactivate(struct led_classdev *led) device_remove_file(led->dev, &dev_attr_inverted); device_remove_file(led->dev, &dev_attr_desired_brightness); flush_work(&gpio_data->work); - free_irq(gpio_to_irq(gpio_data->gpio),led); + if (gpio_data->gpio != 0) + free_irq(gpio_to_irq(gpio_data->gpio), led); kfree(gpio_data); } } From cc674c81f01a6151ca00c617e5efa0812ee5fdbe Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 26 Aug 2009 14:29:32 -0700 Subject: [PATCH 323/338] leds: after setting inverted attribute, we must update the LED If we change the inverted attribute to another value, the LED will not be inverted until we change the GPIO state. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Samuel R. C. Vale Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/leds/ledtrig-gpio.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c index 8183b81fca84..1bc5db4ece0d 100644 --- a/drivers/leds/ledtrig-gpio.c +++ b/drivers/leds/ledtrig-gpio.c @@ -117,6 +117,9 @@ static ssize_t gpio_trig_inverted_store(struct device *dev, gpio_data->inverted = !!inverted; + /* After inverting, we need to update the LED. */ + schedule_work(&gpio_data->work); + return n; } static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show, From 7b6a09f3d6aedeaac923824af2a5df30300b56e9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 23 Aug 2009 22:54:32 +0000 Subject: [PATCH 324/338] powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration On non-PS3, we get: | kernel BUG at drivers/rtc/rtc-ps3.c:36! because the rtc-ps3 platform device is registered unconditionally in a kernel with builtin support for PS3. Reported-by: Sachin Sant Signed-off-by: Geert Uytterhoeven Acked-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/ps3/time.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/ps3/time.c b/arch/powerpc/platforms/ps3/time.c index b178a1e66c91..40b5cb433005 100644 --- a/arch/powerpc/platforms/ps3/time.c +++ b/arch/powerpc/platforms/ps3/time.c @@ -21,6 +21,7 @@ #include #include +#include #include #include #include @@ -84,6 +85,9 @@ static int __init ps3_rtc_init(void) { struct platform_device *pdev; + if (!firmware_has_feature(FW_FEATURE_PS3_LV1)) + return -ENODEV; + pdev = platform_device_register_simple("rtc-ps3", -1, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); From b080f187adb79bbcbe28814b07cbc1ead34c469a Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Tue, 25 Aug 2009 07:53:35 +0000 Subject: [PATCH 325/338] powerpc/ps3: Update ps3_defconfig Update ps3_defconfig. o Refresh for 2.6.31. o Remove MTD support. o Add more HID drivers. Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ps3_defconfig | 211 ++++++++++------------------- 1 file changed, 75 insertions(+), 136 deletions(-) diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index e28e65e7a0e1..7de127e4ceef 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc5 -# Fri May 15 10:37:00 2009 +# Linux kernel version: 2.6.31-rc7 +# Mon Aug 24 17:38:50 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y @@ -20,6 +21,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y @@ -31,6 +33,7 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y @@ -41,7 +44,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y @@ -62,6 +64,7 @@ CONFIG_DTC=y # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -113,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -126,7 +128,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_COUNTERS=y + +# +# Performance Counters +# +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -145,6 +154,11 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -210,7 +224,7 @@ CONFIG_PPC_CELL=y # # Cell Broadband Engine options # -CONFIG_SPU_FS=y +CONFIG_SPU_FS=m CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y @@ -255,6 +269,7 @@ CONFIG_BINFMT_MISC=y CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y # CONFIG_IOMMU_VMERGE is not set CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -285,9 +300,9 @@ CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y @@ -399,6 +414,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -433,11 +449,14 @@ CONFIG_BT_HCIBTUSB=m CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_DEBUGFS is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_DEFAULT_PS=y +CONFIG_MAC80211_DEFAULT_PS_VALUE=1 # # Rate control algorithm selection @@ -447,7 +466,6 @@ CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" -# CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set @@ -472,77 +490,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -CONFIG_MTD=y -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=0 -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set +# CONFIG_MTD is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -590,10 +538,6 @@ CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -626,7 +570,6 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -646,10 +589,11 @@ CONFIG_MII=m # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set CONFIG_NETDEV_1000=y CONFIG_GELIC_NET=y CONFIG_GELIC_WIRELESS=y -CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y +# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set # CONFIG_NETDEV_10000 is not set # @@ -669,8 +613,7 @@ CONFIG_WLAN_80211=y # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set +# CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # @@ -682,7 +625,7 @@ CONFIG_ZD1211RW=m # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m +# CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m @@ -693,10 +636,11 @@ CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set -CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -771,8 +715,7 @@ CONFIG_DEVKMEM=y # CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_LEGACY_PTYS is not set # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -782,6 +725,11 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set @@ -805,22 +753,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -898,6 +831,11 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_PPC=y CONFIG_SND_PS3=m @@ -930,29 +868,34 @@ CONFIG_USB_HIDDEV=y # Special HID drivers # # CONFIG_HID_A4TECH is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set -# CONFIG_HID_EZKEY is not set +# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_EZKEY=m # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MICROSOFT is not set +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m # CONFIG_HID_MONTEREY is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set CONFIG_HID_SONY=m -# CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SUNPLUS=m +# CONFIG_HID_GREENASIA is not set +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -988,6 +931,8 @@ CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1115,6 +1060,10 @@ CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1141,11 +1090,12 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1205,7 +1155,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1222,6 +1171,7 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1359,7 +1309,6 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -1374,31 +1323,21 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_PPC_EMULATED_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set From 52cef7555adf5ca09b3b7283097466759120d901 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 24 Aug 2009 16:03:35 -0400 Subject: [PATCH 326/338] inotify: seperate new watch creation updating existing watches There is nothing known wrong with the inotify watch addition/modification but this patch seperates the two code paths to make them each easy to verify as correct. Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 174 ++++++++++++++++++------------- 1 file changed, 104 insertions(+), 70 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index dc32ed8323ba..d8f73c253073 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -431,80 +431,29 @@ static void inotify_free_mark(struct fsnotify_mark_entry *entry) kmem_cache_free(inotify_inode_mark_cachep, ientry); } -static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg) +static int inotify_update_existing_watch(struct fsnotify_group *group, + struct inode *inode, + u32 arg) { - struct fsnotify_mark_entry *entry = NULL; + struct fsnotify_mark_entry *entry; struct inotify_inode_mark_entry *ientry; - struct inotify_inode_mark_entry *tmp_ientry; - int ret = 0; - int add = (arg & IN_MASK_ADD); - __u32 mask; __u32 old_mask, new_mask; + __u32 mask; + int add = (arg & IN_MASK_ADD); + int ret; /* don't allow invalid bits: we don't want flags set */ mask = inotify_arg_to_mask(arg); if (unlikely(!mask)) return -EINVAL; - tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL); - if (unlikely(!tmp_ientry)) - return -ENOMEM; - /* we set the mask at the end after attaching it */ - fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark); - tmp_ientry->wd = -1; - -find_entry: spin_lock(&inode->i_lock); entry = fsnotify_find_mark_entry(group, inode); spin_unlock(&inode->i_lock); - if (entry) { - ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); - } else { - ret = -ENOSPC; - if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) - goto out_err; -retry: - ret = -ENOMEM; - if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL))) - goto out_err; + if (!entry) + return -ENOENT; - spin_lock(&group->inotify_data.idr_lock); - ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry, - group->inotify_data.last_wd, - &tmp_ientry->wd); - spin_unlock(&group->inotify_data.idr_lock); - if (ret) { - if (ret == -EAGAIN) - goto retry; - goto out_err; - } - - ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode); - if (ret) { - inotify_remove_from_idr(group, tmp_ientry); - if (ret == -EEXIST) - goto find_entry; - goto out_err; - } - - /* tmp_ientry has been added to the inode, so we are all set up. - * now we just need to make sure tmp_ientry doesn't get freed and - * we need to set up entry and ientry so the generic code can - * do its thing. */ - ientry = tmp_ientry; - entry = &ientry->fsn_entry; - tmp_ientry = NULL; - - atomic_inc(&group->inotify_data.user->inotify_watches); - - /* update the idr hint */ - group->inotify_data.last_wd = ientry->wd; - - /* we put the mark on the idr, take a reference */ - fsnotify_get_mark(entry); - } - - ret = ientry->wd; + ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); spin_lock(&entry->lock); @@ -536,19 +485,104 @@ retry: fsnotify_recalc_group_mask(group); } - /* this either matches fsnotify_find_mark_entry, or init_mark_entry - * depending on which path we took... */ + /* return the wd */ + ret = ientry->wd; + + /* match the get from fsnotify_find_mark_entry() */ fsnotify_put_mark(entry); -out_err: - /* could be an error, could be that we found an existing mark */ - if (tmp_ientry) { - /* on the idr but didn't make it on the inode */ - if (tmp_ientry->wd != -1) - inotify_remove_from_idr(group, tmp_ientry); - kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry); + return ret; +} + +static int inotify_new_watch(struct fsnotify_group *group, + struct inode *inode, + u32 arg) +{ + struct inotify_inode_mark_entry *tmp_ientry; + __u32 mask; + int ret; + + /* don't allow invalid bits: we don't want flags set */ + mask = inotify_arg_to_mask(arg); + if (unlikely(!mask)) + return -EINVAL; + + tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL); + if (unlikely(!tmp_ientry)) + return -ENOMEM; + + fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark); + tmp_ientry->fsn_entry.mask = mask; + tmp_ientry->wd = -1; + + ret = -ENOSPC; + if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) + goto out_err; +retry: + ret = -ENOMEM; + if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL))) + goto out_err; + + spin_lock(&group->inotify_data.idr_lock); + ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry, + group->inotify_data.last_wd, + &tmp_ientry->wd); + spin_unlock(&group->inotify_data.idr_lock); + if (ret) { + /* idr was out of memory allocate and try again */ + if (ret == -EAGAIN) + goto retry; + goto out_err; } + /* we are on the idr, now get on the inode */ + ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode); + if (ret) { + /* we failed to get on the inode, get off the idr */ + inotify_remove_from_idr(group, tmp_ientry); + goto out_err; + } + + /* we put the mark on the idr, take a reference */ + fsnotify_get_mark(&tmp_ientry->fsn_entry); + + /* update the idr hint, who cares about races, it's just a hint */ + group->inotify_data.last_wd = tmp_ientry->wd; + + /* increment the number of watches the user has */ + atomic_inc(&group->inotify_data.user->inotify_watches); + + /* return the watch descriptor for this new entry */ + ret = tmp_ientry->wd; + + /* match the ref from fsnotify_init_markentry() */ + fsnotify_put_mark(&tmp_ientry->fsn_entry); + +out_err: + if (ret < 0) + kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry); + + return ret; +} + +static int inotify_update_watch(struct fsnotify_group *group, struct inode *inode, u32 arg) +{ + int ret = 0; + +retry: + /* try to update and existing watch with the new arg */ + ret = inotify_update_existing_watch(group, inode, arg); + /* no mark present, try to add a new one */ + if (ret == -ENOENT) + ret = inotify_new_watch(group, inode, arg); + /* + * inotify_new_watch could race with another thread which did an + * inotify_new_watch between the update_existing and the add watch + * here, go back and try to update an existing mark again. + */ + if (ret == -EEXIST) + goto retry; + return ret; } From cf4374267fbe966e8e4e7db68f5dc7b267439780 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 24 Aug 2009 16:03:35 -0400 Subject: [PATCH 327/338] inotify: do not BUG on idr entries at inotify destruction If an inotify watch is left in the idr when an fsnotify group is destroyed this will lead to a BUG. This is not a dangerous situation and really indicates a programming bug and leak of memory. This patch changes it to use a WARN and a printk rather than killing people's boxes. Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_fsnotify.c | 33 ++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index 5dcbafe72d71..c9ee67b442e1 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -105,16 +105,45 @@ static bool inotify_should_send_event(struct fsnotify_group *group, struct inode return send; } +/* + * This is NEVER supposed to be called. Inotify marks should either have been + * removed from the idr when the watch was removed or in the + * fsnotify_destroy_mark_by_group() call when the inotify instance was being + * torn down. This is only called if the idr is about to be freed but there + * are still marks in it. + */ static int idr_callback(int id, void *p, void *data) { - BUG(); + struct fsnotify_mark_entry *entry; + struct inotify_inode_mark_entry *ientry; + static bool warned = false; + + if (warned) + return 0; + + warned = false; + entry = p; + ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); + + WARN(1, "inotify closing but id=%d for entry=%p in group=%p still in " + "idr. Probably leaking memory\n", id, p, data); + + /* + * I'm taking the liberty of assuming that the mark in question is a + * valid address and I'm dereferencing it. This might help to figure + * out why we got here and the panic is no worse than the original + * BUG() that was here. + */ + if (entry) + printk(KERN_WARNING "entry->group=%p inode=%p wd=%d\n", + entry->group, entry->inode, ientry->wd); return 0; } static void inotify_free_group_priv(struct fsnotify_group *group) { /* ideally the idr is empty and we won't hit the BUG in teh callback */ - idr_for_each(&group->inotify_data.idr, idr_callback, NULL); + idr_for_each(&group->inotify_data.idr, idr_callback, group); idr_remove_all(&group->inotify_data.idr); idr_destroy(&group->inotify_data.idr); } From dead537dd8a1c9495322c1d6f7c780697f474af0 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 24 Aug 2009 16:03:35 -0400 Subject: [PATCH 328/338] inotify: fix locking around inotify watching in the idr The are races around the idr storage of inotify watches. It's possible that a watch could be found from sys_inotify_rm_watch() in the idr, but it could be removed from the idr before that code does it's removal. Move the locking and the refcnt'ing so that these have to happen atomically. Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 50 +++++++++++++++++++++++++------- 1 file changed, 40 insertions(+), 10 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index d8f73c253073..ce1f5823e2c2 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -364,20 +364,53 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns return error; } +/* + * Remove the mark from the idr (if present) and drop the reference + * on the mark because it was in the idr. + */ static void inotify_remove_from_idr(struct fsnotify_group *group, struct inotify_inode_mark_entry *ientry) { struct idr *idr; + struct fsnotify_mark_entry *entry; + struct inotify_inode_mark_entry *found_ientry; + int wd; spin_lock(&group->inotify_data.idr_lock); idr = &group->inotify_data.idr; - idr_remove(idr, ientry->wd); - spin_unlock(&group->inotify_data.idr_lock); + wd = ientry->wd; + + if (wd == -1) + goto out; + + entry = idr_find(&group->inotify_data.idr, wd); + if (unlikely(!entry)) + goto out; + + found_ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry); + if (unlikely(found_ientry != ientry)) { + /* We found an entry in the idr with the right wd, but it's + * not the entry we were told to remove. eparis seriously + * fucked up somewhere. */ + WARN_ON(1); + ientry->wd = -1; + goto out; + } + + /* One ref for being in the idr, one ref held by the caller */ + BUG_ON(atomic_read(&entry->refcnt) < 2); + + idr_remove(idr, wd); ientry->wd = -1; + + /* removed from the idr, drop that ref */ + fsnotify_put_mark(entry); +out: + spin_unlock(&group->inotify_data.idr_lock); } + /* - * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the - * internal reference help on the mark because it is in the idr. + * Send IN_IGNORED for this wd, remove this wd from the idr. */ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry, struct fsnotify_group *group) @@ -417,9 +450,6 @@ skip_send_ignore: /* remove this entry from the idr */ inotify_remove_from_idr(group, ientry); - /* removed from idr, drop that reference */ - fsnotify_put_mark(entry); - atomic_dec(&group->inotify_data.user->inotify_watches); } @@ -535,6 +565,9 @@ retry: goto out_err; } + /* we put the mark on the idr, take a reference */ + fsnotify_get_mark(&tmp_ientry->fsn_entry); + /* we are on the idr, now get on the inode */ ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode); if (ret) { @@ -543,9 +576,6 @@ retry: goto out_err; } - /* we put the mark on the idr, take a reference */ - fsnotify_get_mark(&tmp_ientry->fsn_entry); - /* update the idr hint, who cares about races, it's just a hint */ group->inotify_data.last_wd = tmp_ientry->wd; From 0db501bd0610ee0c0aca84d927f90bcccd09e2bd Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Thu, 27 Aug 2009 03:20:04 -0700 Subject: [PATCH 329/338] inotify: Ensure we alwasy write the terminating NULL. Before the rewrite copy_event_to_user always wrote a terqminating '\0' byte to user space after the filename. Since the rewrite that terminating byte was skipped if your filename is exactly a multiple of event_size. Ouch! So add one byte to name_size before we round up and use clear_user to set userspace to zero like /dev/zero does instead of copying the strange nul_inotify_event. I can't quite convince myself len_to_zero will never exceed 16 and even if it doesn't clear_user should be more efficient and a more accurate reflection of what the code is trying to do. Signed-off-by: Eric W. Biederman Signed-off-by: Eric Paris --- fs/notify/inotify/inotify_user.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index ce1f5823e2c2..0e781bc88d1e 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -47,9 +47,6 @@ static struct vfsmount *inotify_mnt __read_mostly; -/* this just sits here and wastes global memory. used to just pad userspace messages with zeros */ -static struct inotify_event nul_inotify_event; - /* these are configurable via /proc/sys/fs/inotify/ */ static int inotify_max_user_instances __read_mostly; static int inotify_max_queued_events __read_mostly; @@ -199,8 +196,10 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group, inotify_free_event_priv(fsn_priv); } - /* round up event->name_len so it is a multiple of event_size */ - name_len = roundup(event->name_len, event_size); + /* round up event->name_len so it is a multiple of event_size + * plus an extra byte for the terminating '\0'. + */ + name_len = roundup(event->name_len + 1, event_size); inotify_event.len = name_len; inotify_event.mask = inotify_mask_to_arg(event->mask); @@ -224,8 +223,8 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group, return -EFAULT; buf += event->name_len; - /* fill userspace with 0's from nul_inotify_event */ - if (copy_to_user(buf, &nul_inotify_event, len_to_zero)) + /* fill userspace with 0's */ + if (clear_user(buf, len_to_zero)) return -EFAULT; buf += len_to_zero; event_size += name_len; From 9886e836a6a5dbd273dc55b17e713f0a188d137f Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 27 Aug 2009 13:09:06 +0100 Subject: [PATCH 330/338] AFS: Stop readlink() on AFS crashing due to NULL 'file' ptr kAFS crashes when asked to read a symbolic link because page_getlink() passes a NULL file pointer to read_mapping_page(), but afs_readpage() expects a file pointer from which to extract a key. Modify afs_readpage() to request the appropriate key from the calling process's keyrings if a file struct is not supplied with one attached. Signed-off-by: David Howells Acked-by: Anton Blanchard Signed-off-by: Linus Torvalds --- fs/afs/file.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/fs/afs/file.c b/fs/afs/file.c index 0149dab365e7..681c2a7b013f 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -134,9 +134,16 @@ static int afs_readpage(struct file *file, struct page *page) inode = page->mapping->host; - ASSERT(file != NULL); - key = file->private_data; - ASSERT(key != NULL); + if (file) { + key = file->private_data; + ASSERT(key != NULL); + } else { + key = afs_request_key(AFS_FS_S(inode->i_sb)->volume->cell); + if (IS_ERR(key)) { + ret = PTR_ERR(key); + goto error_nokey; + } + } _enter("{%x},{%lu},{%lu}", key_serial(key), inode->i_ino, page->index); @@ -207,12 +214,17 @@ static int afs_readpage(struct file *file, struct page *page) unlock_page(page); } + if (!file) + key_put(key); _leave(" = 0"); return 0; error: SetPageError(page); unlock_page(page); + if (!file) + key_put(key); +error_nokey: _leave(" = %d", ret); return ret; } From 788d908f2879a17e5f80924f3da2e23f1034482d Mon Sep 17 00:00:00 2001 From: Julien TINNES Date: Thu, 27 Aug 2009 15:26:58 +0200 Subject: [PATCH 331/338] ipv4: make ip_append_data() handle NULL routing table Add a check in ip_append_data() for NULL *rtp to prevent future bugs in callers from being exploitable. Signed-off-by: Julien Tinnes Signed-off-by: Tavis Ormandy Acked-by: David S. Miller Signed-off-by: Linus Torvalds --- net/ipv4/ip_output.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 7d0821054729..7ffcd96fe591 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -813,6 +813,8 @@ int ip_append_data(struct sock *sk, inet->cork.addr = ipc->addr; } rt = *rtp; + if (unlikely(!rt)) + return -EFAULT; /* * We steal reference to this route, caller should not release it */ From 4f8ee2c9cc0e885d2bb50ef26db66150ab25213e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 27 Aug 2009 17:20:30 +1000 Subject: [PATCH 332/338] lmb: Remove __init from lmb_end_of_DRAM() We call lmb_end_of_DRAM() to test whether a DMA mask is ok on a machine without IOMMU, but this function is marked as __init. I don't think there's a clean way to get the top of RAM max_pfn doesn't appear to include highmem or I missed (or we have a bug :-) so for now, let's just avoid having a broken 2.6.31 by making this function non-__init and we can revisit later. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- lib/lmb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/lmb.c b/lib/lmb.c index e4a6482d8b26..0343c05609f0 100644 --- a/lib/lmb.c +++ b/lib/lmb.c @@ -429,7 +429,7 @@ u64 __init lmb_phys_mem_size(void) return lmb.memory.size; } -u64 __init lmb_end_of_DRAM(void) +u64 lmb_end_of_DRAM(void) { int idx = lmb.memory.cnt - 1; From 0a80fb10239b04c45e5e80aad8d4b2ca5ac407b2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 27 Aug 2009 12:22:43 -0700 Subject: [PATCH 333/338] xenfb: connect to backend before registering fb As soon as the framebuffer is registered, our methods may be called by the kernel. This leads to a crash as xenfb_refresh() gets called before we have the irq. Connect to the backend before registering our framebuffer with the kernel. [ Fixes bug http://bugzilla.kernel.org/show_bug.cgi?id=14059 ] Signed-off-by: Michal Schmidt Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds --- drivers/video/xen-fbfront.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 15502d5e3641..54cd91610174 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -454,6 +454,10 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, xenfb_init_shared_page(info, fb_info); + ret = xenfb_connect_backend(dev, info); + if (ret < 0) + goto error; + ret = register_framebuffer(fb_info); if (ret) { fb_deferred_io_cleanup(fb_info); @@ -464,10 +468,6 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, } info->fb_info = fb_info; - ret = xenfb_connect_backend(dev, info); - if (ret < 0) - goto error; - xenfb_make_preferred_console(); return 0; From 7d1d16e416e61aeef8655d542f8e4a4fc6e808e4 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 26 Aug 2009 22:02:54 +0930 Subject: [PATCH 334/338] module: fix BUG_ON() for powerpc (and other function descriptor archs) The rarely-used symbol_put_addr() needs to use dereference_function_descriptor on powerpc. Reported-by: Paul Mackerras Signed-off-by: Rusty Russell --- kernel/module.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/module.c b/kernel/module.c index fd1411403558..07c80e68a6c4 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -909,16 +909,18 @@ void __symbol_put(const char *symbol) } EXPORT_SYMBOL(__symbol_put); +/* Note this assumes addr is a function, which it currently always is. */ void symbol_put_addr(void *addr) { struct module *modaddr; + unsigned long a = (unsigned long)dereference_function_descriptor(addr); - if (core_kernel_text((unsigned long)addr)) + if (core_kernel_text(a)) return; /* module_text_address is safe here: we're supposed to have reference * to module from symbol_get, so it can't go away. */ - modaddr = __module_text_address((unsigned long)addr); + modaddr = __module_text_address(a); BUG_ON(!modaddr); module_put(modaddr); } From 1b364bf438cf337a3818aee77d68c0713f3e1fc4 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 26 Aug 2009 22:04:12 +0930 Subject: [PATCH 335/338] module: workaround duplicate section names The root cause is a duplicate section name (.text); is this legal? [ Amerigo Wang: "AFAIK, yes." ] However, there's a problem with commit 6d76013381ed28979cd122eb4b249a88b5e384fa in that if you fail to allocate a mod->sect_attrs (in this case it's null because of the duplication), it still gets used without checking in add_notes_attrs() This should fix it [ This patch leaves other problems, particularly the sections directory, but recent parisc toolchains seem to produce these modules and this prevents a crash and is a minimal change -- RR ] Signed-off-by: James Bottomley Signed-off-by: Rusty Russell Tested-by: Helge Deller Signed-off-by: Linus Torvalds --- kernel/module.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index 07c80e68a6c4..eccb561dd8a3 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2355,7 +2355,8 @@ static noinline struct module *load_module(void __user *umod, if (err < 0) goto unlink; add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs); - add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs); + if (mod->sect_attrs) + add_notes_attrs(mod, hdr->e_shnum, secstrings, sechdrs); /* Get rid of temporary copy */ vfree(hdr); From 326ba5010a5429a5a528b268b36a5900d4ab0eba Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 27 Aug 2009 17:59:04 -0700 Subject: [PATCH 336/338] Linux 2.6.31-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9c87e60d169c..25c615e57302 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 31 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From 6bb56347f5162d1a7cb1dc461023360781ecd4c0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 28 Aug 2009 13:44:53 +0200 Subject: [PATCH 337/338] perf_counters: Increase paranoia level Per-cpu counters are an ASLR information leak as they show the execution other tasks do. Increase the paranoia level to 1, which disallows per-cpu counters. (they still allow counting/profiling of own tasks - and admin can profile everything.) Acked-by: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/perf_counter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index f274e1959885..7d4bb83b78cf 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -50,7 +50,7 @@ static atomic_t nr_task_counters __read_mostly; * 1 - disallow cpu counters to unpriv * 2 - disallow kernel profiling to unpriv */ -int sysctl_perf_counter_paranoid __read_mostly; +int sysctl_perf_counter_paranoid __read_mostly = 1; static inline bool perf_paranoid_cpu(void) { From eced1dfcfcf6b0a35e925d73916a9d8e36ab5457 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 28 Aug 2009 17:10:47 +0200 Subject: [PATCH 338/338] perf_counter: Fix /0 bug in swcounters We have a race in the swcounter stuff where we can start counting a counter that has never been enabled, this leads to a /0 situation. The below avoids the /0 but doesn't close the race, this would need a new counter state. The race is due to perf_swcounter_is_counting() which cannot discern between disabled due to scheduled out, and disabled for any other reason. Such a crash has been seen by Ingo: [ 967.092372] divide error: 0000 [#1] SMP [ 967.096499] last sysfs file: /sys/devices/system/cpu/cpu15/cache/index2/shared_cpu_map [ 967.104846] CPU 5 [ 967.106965] Modules linked in: [ 967.110169] Pid: 3351, comm: hackbench Not tainted 2.6.31-rc8-tip-01158-gd940a54-dirty #1568 X8DTN [ 967.119456] RIP: 0010:[] [] perf_swcounter_ctx_event+0x127/0x1af [ 967.129137] RSP: 0018:ffff8801a95abd70 EFLAGS: 00010046 [ 967.134699] RAX: 0000000000000002 RBX: ffff8801bd645c00 RCX: 0000000000000002 [ 967.142162] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8801bd645d40 [ 967.149584] RBP: ffff8801a95abdb0 R08: 0000000000000001 R09: ffff8801a95abe00 [ 967.157042] R10: 0000000000000037 R11: ffff8801aa1245f8 R12: ffff8801a95abe00 [ 967.164481] R13: ffff8801a95abe00 R14: ffff8801aa1c0e78 R15: 0000000000000001 [ 967.171953] FS: 0000000000000000(0000) GS:ffffc90000a00000(0063) knlGS:00000000f7f486c0 [ 967.180406] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 967.186374] CR2: 000000004822c0ac CR3: 00000001b19a2000 CR4: 00000000000006e0 [ 967.193770] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 967.201224] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 967.208692] Process hackbench (pid: 3351, threadinfo ffff8801a95aa000, task ffff8801a96b0000) [ 967.217607] Stack: [ 967.219711] 0000000000000000 0000000000000037 0000000200000001 ffffc90000a1107c [ 967.227296] <0> ffff8801a95abe00 0000000000000001 0000000000000001 0000000000000037 [ 967.235333] <0> ffff8801a95abdf0 ffffffff810c0c20 0000000200a14f30 ffff8801a95abe40 [ 967.243532] Call Trace: [ 967.246103] [] do_perf_swcounter_event+0xde/0xec [ 967.252635] [] perf_tpcounter_event+0x79/0x7b [ 967.258957] [] ftrace_profile_sched_switch+0xc0/0xcb [ 967.265791] [] schedule+0x429/0x4c4 [ 967.271156] [] int_careful+0xd/0x14 Reported-by: Ingo Molnar Signed-off-by: Peter Zijlstra Cc: Paul Mackerras LKML-Reference: <1251472247.17617.74.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/perf_counter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/perf_counter.c b/kernel/perf_counter.c index 7d4bb83b78cf..d7cbc579fc80 100644 --- a/kernel/perf_counter.c +++ b/kernel/perf_counter.c @@ -4066,6 +4066,7 @@ perf_counter_alloc(struct perf_counter_attr *attr, hwc->sample_period = attr->sample_period; if (attr->freq && attr->sample_freq) hwc->sample_period = 1; + hwc->last_period = hwc->sample_period; atomic64_set(&hwc->period_left, hwc->sample_period);