diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 365795447804..c77170c04fd0 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -66,10 +66,22 @@ config ARCH_VEXPRESS_DCSCB
 	  This is needed to provide CPU and cluster power management
 	  on RTSM implementing big.LITTLE.
 
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
 config ARCH_VEXPRESS_TC2_PM
 	bool "Versatile Express TC2 power management"
 	depends on MCPM
 	select ARM_CCI
+	select ARCH_VEXPRESS_SPC
 	help
 	  Support for CPU and cluster power management on Versatile Express
 	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 505e64ab3eae..0997e0b7494c 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -8,7 +8,8 @@ obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
-obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
 CFLAGS_tc2_pm.o				+= -march=armv7-a
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index eefb029197ca..de0ca3615c36 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -17,14 +17,27 @@
  * GNU General Public License for more details.
  */
 
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/semaphore.h>
 
 #include <asm/cacheflush.h>
 
 #define SPCLOG "vexpress-spc: "
 
+#define PERF_LVL_A15		0x00
+#define PERF_REQ_A15		0x04
+#define PERF_LVL_A7		0x08
+#define PERF_REQ_A7		0x0c
+#define COMMS			0x10
+#define COMMS_REQ		0x14
+#define PWC_STATUS		0x18
+#define PWC_FLAG		0x1c
+
 /* SPC wake-up IRQs status and mask */
 #define WAKE_INT_MASK		0x24
 #define WAKE_INT_RAW		0x28
@@ -36,12 +49,45 @@
 #define A15_BX_ADDR0		0x68
 #define A7_BX_ADDR0		0x78
 
+/* SPC system config interface registers */
+#define SYSCFG_WDATA		0x70
+#define SYSCFG_RDATA		0x74
+
+/* A15/A7 OPP virtual register base */
+#define A15_PERFVAL_BASE	0xC10
+#define A7_PERFVAL_BASE		0xC30
+
+/* Config interface control bits */
+#define SYSCFG_START		(1 << 31)
+#define SYSCFG_SCC		(6 << 20)
+#define SYSCFG_STAT		(14 << 20)
+
 /* wake-up interrupt masks */
 #define GBL_WAKEUP_INT_MSK	(0x3 << 10)
 
 /* TC2 static dual-cluster configuration */
 #define MAX_CLUSTERS		2
 
+/*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+#define TIMEOUT_US	20000
+
+#define MAX_OPPS	8
+#define CA15_DVFS	0
+#define CA7_DVFS	1
+#define SPC_SYS_CFG	2
+#define STAT_COMPLETE(type)	((1 << 0) << (type << 2))
+#define STAT_ERR(type)		((1 << 1) << (type << 2))
+#define RESPONSE_MASK(type)	(STAT_COMPLETE(type) | STAT_ERR(type))
+
+struct ve_spc_opp {
+	unsigned long freq;
+	unsigned long u_volt;
+};
+
 struct ve_spc_drvdata {
 	void __iomem *baseaddr;
 	/*
@@ -49,6 +95,12 @@ struct ve_spc_drvdata {
 	 * It corresponds to A15 processors MPIDR[15:8] bitfield
 	 */
 	u32 a15_clusid;
+	uint32_t cur_rsp_mask;
+	uint32_t cur_rsp_stat;
+	struct semaphore sem;
+	struct completion done;
+	struct ve_spc_opp *opps[MAX_CLUSTERS];
+	int num_opps[MAX_CLUSTERS];
 };
 
 static struct ve_spc_drvdata *info;
@@ -157,8 +209,197 @@ void ve_spc_powerdown(u32 cluster, bool enable)
 	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
 }
 
-int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
+static int ve_spc_get_performance(int cluster, u32 *freq)
 {
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 perf_cfg_reg = 0;
+	u32 perf;
+
+	perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+	perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+	if (perf >= info->num_opps[cluster])
+		return -EINVAL;
+
+	opps += perf;
+	*freq = opps->freq;
+
+	return 0;
+}
+
+/* find closest match to given frequency in OPP table */
+static int ve_spc_round_performance(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 fmin = 0, fmax = ~0, ftmp;
+
+	freq /= 1000; /* OPP entries in kHz */
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ftmp = opps->freq;
+		if (ftmp >= freq) {
+			if (ftmp <= fmax)
+				fmax = ftmp;
+		} else {
+			if (ftmp >= fmin)
+				fmin = ftmp;
+		}
+	}
+	if (fmax != ~0)
+		return fmax * 1000;
+	else
+		return fmin * 1000;
+}
+
+static int ve_spc_find_performance_index(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++)
+		if (opps->freq == freq)
+			break;
+	return (idx == max_opp) ? -EINVAL : idx;
+}
+
+static int ve_spc_waitforcompletion(int req_type)
+{
+	int ret = wait_for_completion_interruptible_timeout(
+			&info->done, usecs_to_jiffies(TIMEOUT_US));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+	else if (ret > 0)
+		ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+	return ret;
+}
+
+static int ve_spc_set_performance(int cluster, u32 freq)
+{
+	u32 perf_cfg_reg, perf_stat_reg;
+	int ret, perf, req_type;
+
+	if (cluster_is_a15(cluster)) {
+		req_type = CA15_DVFS;
+		perf_cfg_reg = PERF_LVL_A15;
+		perf_stat_reg = PERF_REQ_A15;
+	} else {
+		req_type = CA7_DVFS;
+		perf_cfg_reg = PERF_LVL_A7;
+		perf_stat_reg = PERF_REQ_A7;
+	}
+
+	perf = ve_spc_find_performance_index(cluster, freq);
+
+	if (perf < 0)
+		return perf;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+	writel(perf, info->baseaddr + perf_cfg_reg);
+	ret = ve_spc_waitforcompletion(req_type);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+{
+	int ret;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+	/* Set the control value */
+	writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+	ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+	if (ret == 0)
+		*data = readl(info->baseaddr + SYSCFG_RDATA);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+{
+	struct ve_spc_drvdata *drv_data = data;
+	uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+	if (info->cur_rsp_mask & status) {
+		info->cur_rsp_stat = status;
+		complete(&drv_data->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  +--------------------------+
+ *  | 31      20 | 19        0 |
+ *  +--------------------------+
+ *  |   u_volt   |  freq(kHz)  |
+ *  +--------------------------+
+ */
+#define MULT_FACTOR	20
+#define VOLT_SHIFT	20
+#define FREQ_MASK	(0xFFFFF)
+static int ve_spc_populate_opps(uint32_t cluster)
+{
+	uint32_t data = 0, off, ret, idx;
+	struct ve_spc_opp *opps;
+
+	opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL);
+	if (!opps)
+		return -ENOMEM;
+
+	info->opps[cluster] = opps;
+
+	off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+	for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+		if (!ret) {
+			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+			opps->u_volt = data >> VOLT_SHIFT;
+		} else {
+			break;
+		}
+	}
+	info->num_opps[cluster] = idx;
+
+	return ret;
+}
+
+static int ve_init_opp_table(struct device *cpu_dev)
+{
+	int cluster = topology_physical_package_id(cpu_dev->id);
+	int idx, ret = 0, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+				 opps->freq, opps->u_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+{
+	int ret;
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (!info) {
 		pr_err(SPCLOG "unable to allocate mem\n");
@@ -168,6 +409,25 @@ int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid)
 	info->baseaddr = baseaddr;
 	info->a15_clusid = a15_clusid;
 
+	if (irq <= 0) {
+		pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+		kfree(info);
+		return -EINVAL;
+	}
+
+	init_completion(&info->done);
+
+	readl_relaxed(info->baseaddr + PWC_STATUS);
+
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+				| IRQF_ONESHOT, "vexpress-spc", info);
+	if (ret) {
+		pr_err(SPCLOG "IRQ %d request failed\n", irq);
+		kfree(info);
+		return -ENODEV;
+	}
+
+	sema_init(&info->sem, 1);
 	/*
 	 * Multi-cluster systems may need this data when non-coherent, during
 	 * cluster power-up/power-down. Make sure driver info reaches main
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
index 5f7e4a446a17..dbd44c3720f9 100644
--- a/arch/arm/mach-vexpress/spc.h
+++ b/arch/arm/mach-vexpress/spc.h
@@ -15,7 +15,7 @@
 #ifndef __SPC_H_
 #define __SPC_H_
 
-int __init ve_spc_init(void __iomem *base, u32 a15_clusid);
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq);
 void ve_spc_global_wakeup_irq(bool set);
 void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
 void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
index e6eb48192912..d38130aba464 100644
--- a/arch/arm/mach-vexpress/tc2_pm.c
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/irqchip/arm-gic.h>
@@ -311,7 +312,7 @@ static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
 
 static int __init tc2_pm_init(void)
 {
-	int ret;
+	int ret, irq;
 	void __iomem *scc;
 	u32 a15_cluster_id, a7_cluster_id, sys_info;
 	struct device_node *np;
@@ -336,13 +337,15 @@ static int __init tc2_pm_init(void)
 	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
 	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
 
+	irq = irq_of_parse_and_map(np, 0);
+
 	/*
 	 * A subset of the SCC registers is also used to communicate
 	 * with the SPC (power controller). We need to be able to
 	 * drive it very early in the boot process to power up
 	 * processors, so we initialize the SPC driver here.
 	 */
-	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id);
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
 	if (ret)
 		return ret;