diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index b8a78ab49cdd..c2345af3707a 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc6 -# Mon Sep 17 14:21:45 2007 +# Linux kernel version: 2.6.24-rc5 +# Mon Dec 17 20:04:38 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -41,9 +41,14 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,7 +69,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -224,10 +228,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -236,6 +236,7 @@ CONFIG_ARM_THUMB=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_PREEMPT=y CONFIG_HZ=128 CONFIG_AEABI=y @@ -248,6 +249,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -275,6 +277,8 @@ CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -347,6 +351,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -372,10 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -404,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -422,6 +424,8 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -459,6 +463,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set @@ -471,12 +476,18 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -522,7 +533,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=y @@ -576,6 +586,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TPS65010=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -584,41 +694,17 @@ CONFIG_WATCHDOG_NOWAYOUT=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_OMAP_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_NEW_LEDS is not set # # Multimedia devices @@ -630,12 +716,6 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -644,6 +724,7 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -659,8 +740,14 @@ CONFIG_FB_MODE_HELPERS=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_OMAP is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -705,6 +792,7 @@ CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -720,22 +808,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - # # File systems # @@ -771,8 +847,9 @@ CONFIG_DNOTIFY=y # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -783,7 +860,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -802,10 +878,7 @@ CONFIG_CRAMFS=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -832,13 +905,9 @@ CONFIG_RPCSEC_GSS_KRB5=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -862,7 +931,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -876,21 +945,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -899,6 +963,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_USER is not set # @@ -906,6 +971,7 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y @@ -925,6 +991,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set @@ -938,11 +1005,13 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_HW=y # diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index 8c1f15c7c45c..d592a6487114 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc6 -# Mon Sep 17 14:15:05 2007 +# Linux kernel version: 2.6.24-rc5 +# Mon Dec 17 21:12:45 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -40,9 +40,14 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -63,7 +68,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -224,10 +228,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -245,6 +245,7 @@ CONFIG_OMAP_CF=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y @@ -257,6 +258,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 @@ -346,6 +348,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -371,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -403,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -427,6 +427,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -495,6 +496,8 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_IDE=m CONFIG_BLK_DEV_IDE=m @@ -515,9 +518,10 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_IDE_ARCH_OBSOLETE_INIT=y # CONFIG_BLK_DEV_HD is not set # @@ -536,12 +540,18 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -585,7 +595,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -651,7 +660,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m CONFIG_HW_RANDOM_OMAP=m # CONFIG_NVRAM is not set @@ -712,10 +720,9 @@ CONFIG_TPS65010=y # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -723,12 +730,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -761,14 +768,18 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set -# CONFIG_NEW_LEDS is not set # # Multimedia devices @@ -780,12 +791,6 @@ CONFIG_DAB=y # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -794,6 +799,7 @@ CONFIG_FIRMWARE_EDID=y # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -809,8 +815,14 @@ CONFIG_FB_MODE_HELPERS=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_OMAP is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -843,6 +855,7 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_HID_SUPPORT=y CONFIG_HID=y CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -858,22 +871,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - # # File systems # @@ -922,7 +923,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -938,10 +938,12 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -950,10 +952,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -979,10 +978,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1023,21 +1018,16 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1046,6 +1036,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set # CONFIG_DEBUG_USER is not set # @@ -1053,6 +1044,7 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion_defconfig index 17a55def1103..1e5aaa645fcd 100644 --- a/arch/arm/configs/orion_defconfig +++ b/arch/arm/configs/orion_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Wed Nov 28 15:13:57 2007 +# Linux kernel version: 2.6.24 +# Thu Feb 7 14:10:30 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -63,17 +63,26 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -101,6 +110,8 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_RCU is not set # # System Type @@ -139,6 +150,7 @@ CONFIG_ARCH_ORION=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set # # Orion Implementations @@ -226,6 +238,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set +# CONFIG_ATAGS_PROC is not set # # Floating point emulation @@ -250,7 +263,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -267,6 +280,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -322,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN=m # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -475,7 +490,7 @@ CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y +# CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) @@ -483,15 +498,15 @@ CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set @@ -528,16 +543,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set -CONFIG_SCSI_MVSATA=y - -# -# Sata options -# -# CONFIG_MV_SATA_SUPPORT_ATAPI is not set -# CONFIG_MV_SATA_ENABLE_1MB_IOS is not set -CONFIG_SATA_NO_DEBUG=y -# CONFIG_SATA_DEBUG_ON_ERROR is not set -# CONFIG_SATA_FULL_DEBUG is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -549,12 +554,12 @@ CONFIG_SATA_NO_DEBUG=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set -CONFIG_ATA=m +CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set @@ -590,6 +595,7 @@ CONFIG_ATA=m # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -622,7 +628,6 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -653,6 +658,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -666,6 +672,9 @@ CONFIG_E1000=y CONFIG_E1000_NAPI=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -691,6 +700,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # @@ -713,7 +723,6 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -761,6 +770,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -832,13 +842,12 @@ CONFIG_I2C_MV64XXX=y # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -967,6 +976,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -980,16 +990,12 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_SL811_HCD=y +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # @@ -1029,10 +1035,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1058,14 +1060,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set CONFIG_NEW_LEDS=y @@ -1120,9 +1114,10 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -1298,9 +1293,6 @@ CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1327,6 +1319,7 @@ CONFIG_DEBUG_USER=y CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set @@ -1344,6 +1337,9 @@ CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set @@ -1358,13 +1354,16 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 391b6f4827f6..015a66b3ca8e 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -13,20 +13,20 @@ obj-$(CONFIG_PM) += pm.o sleep.o led-y := leds.o # Specific board support -obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o +obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o -obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o +obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o -obj-$(CONFIG_MACH_SX1) += board-sx1.o +obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c73ca61e585e..8b102ad59c14 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void) } static struct map_desc ams_delta_io_desc[] __initdata = { - // AMS_DELTA_LATCH1 + /* AMS_DELTA_LATCH1 */ { .virtual = AMS_DELTA_LATCH1_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_LATCH2 + /* AMS_DELTA_LATCH2 */ { .virtual = AMS_DELTA_LATCH2_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, - // AMS_DELTA_MODEM + /* AMS_DELTA_MODEM */ { .virtual = AMS_DELTA_MODEM_VIRT, .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), @@ -227,6 +227,7 @@ static void __init ams_delta_init(void) omap_board_config = ams_delta_config; omap_board_config_size = ARRAY_SIZE(ams_delta_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); /* Clear latch2 (NAND, LCD, modem enable) */ ams_delta_latch2_write(~0, 0); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f550b19e1ecd..1bdb66638e29 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -134,7 +135,7 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, }; @@ -202,7 +203,7 @@ static struct platform_device *devices[] __initdata = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); } @@ -233,6 +234,7 @@ static void __init omap_fsample_init(void) omap_board_config = fsample_config; omap_board_config_size = ARRAY_SIZE(fsample_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init fsample_init_smc91x(void) diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 33d01adab1ed..c711bf23f7b4 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -55,33 +55,14 @@ static struct omap_usb_config generic1610_usb_config __initdata = { .hmc_mode = 16, .pins[0] = 6, }; - -static struct omap_mmc_config generic_mmc_config __initdata = { - .mmc [0] = { - .enabled = 0, - .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, - .switch_pin = -1, - }, - .mmc [1] = { - .enabled = 0, - .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, - .switch_pin = -1, - }, -}; - #endif static struct omap_uart_config generic_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; -static struct omap_board_config_kernel generic_config[] = { - { OMAP_TAG_USB, NULL }, - { OMAP_TAG_MMC, &generic_mmc_config }, +static struct omap_board_config_kernel generic_config[] __initdata = { + { OMAP_TAG_USB, NULL }, { OMAP_TAG_UART, &generic_uart_config }, }; @@ -101,6 +82,7 @@ static void __init omap_generic_init(void) omap_board_config = generic_config; omap_board_config_size = ARRAY_SIZE(generic_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_generic_map_io(void) diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c new file mode 100644 index 000000000000..6fdc78406b21 --- /dev/null +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -0,0 +1,110 @@ +/* + * linux/arch/arm/mach-omap1/board-h2-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h2_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h2_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h2_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h2_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h2_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h2_mmc_late_init, + .cleanup = h2_mmc_cleanup, + .slots[0] = { + .set_power = h2_mmc_set_power, + .set_bus_mode = h2_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h2_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h2_mmc_init(void) +{ + omap_set_mmc_info(1, &h2_mmc_data); +} + +#else + +void __init h2_mmc_init(void) +{ +} + +void h2_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index bfa04fa25524..070345ee39a5 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,8 +37,10 @@ #include #include +#include #include #include +#include #include #include #include @@ -46,8 +48,6 @@ #include #include -extern int omap_gpio_init(void); - static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -140,8 +140,6 @@ static struct platform_device h2_nor_device = { .resource = &h2_nor_resource, }; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ - static struct mtd_partition h2_nand_partitions[] = { #if 0 /* REVISIT: enable these partitions if you make NAND BOOT @@ -179,7 +177,7 @@ static struct mtd_partition h2_nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data h2_nand_data = { +static struct omap_nand_platform_data h2_nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = h2_nand_partitions, .nr_parts = ARRAY_SIZE(h2_nand_partitions), @@ -198,7 +196,6 @@ static struct platform_device h2_nand_device = { .num_resources = 1, .resource = &h2_nand_resource, }; -#endif static struct resource h2_smc91x_resources[] = { [0] = { @@ -311,18 +308,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H2 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h2_mcbsp1_device = { @@ -335,7 +332,7 @@ static struct platform_device h2_mcbsp1_device = { static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, - //&h2_nand_device, + &h2_nand_device, &h2_smc91x_device, &h2_irda_device, &h2_kp_device, @@ -343,22 +340,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; -#ifdef CONFIG_I2C_BOARDINFO -static struct i2c_board_info __initdata h2_i2c_board_info[] = { - { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65010", - .irq = OMAP_GPIO_IRQ(58), - }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - pcf9754 for aGPS control - * - ... etc - */ -}; -#endif - static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -367,6 +348,14 @@ static void __init h2_init_smc91x(void) } } +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("isp1301_omap", 0x2d), + .type = "isp1301_omap", + .irq = OMAP_GPIO_IRQ(2), + }, +}; + static void __init h2_init_irq(void) { omap1_init_common_hw(); @@ -380,26 +369,25 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* needs OTG cable, or NONSTANDARD (B-to-MiniB) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, }; static struct omap_mmc_config h2_mmc_config __initdata = { - .mmc [0] = { - .enabled = 1, + .mmc[0] = { + .enabled = 1, .wire4 = 1, - .wp_pin = OMAP_MPUIO(3), - .power_pin = -1, /* tps65010 gpio3 */ - .switch_pin = OMAP_MPUIO(1), }, }; +extern struct omap_mmc_platform_data h2_mmc_data; + static struct omap_uart_config h2_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -409,15 +397,15 @@ static struct omap_lcd_config h2_lcd_config __initdata = { }; static struct omap_board_config_kernel h2_config[] __initdata = { - { OMAP_TAG_USB, &h2_usb_config }, - { OMAP_TAG_MMC, &h2_mmc_config }, + { OMAP_TAG_USB, &h2_usb_config }, + { OMAP_TAG_MMC, &h2_mmc_config }, { OMAP_TAG_UART, &h2_uart_config }, { OMAP_TAG_LCD, &h2_lcd_config }, }; #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct nand_platform_data *data) +static int h2_nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H2_NAND_RB_GPIO_PIN); } @@ -436,18 +424,16 @@ static void __init h2_init(void) h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys(); h2_nor_resource.end += SZ_32M - 1; -#if 0 /* REVISIT: Enable when nand_platform_data is applied */ h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) h2_nand_data.dev_ready = h2_nand_dev_ready; -#endif omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); /* MMC: card detect and WP */ - // omap_cfg_reg(U19_ARMIO1); /* CD */ + /* omap_cfg_reg(U19_ARMIO1); */ /* CD */ omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */ /* Irda */ @@ -463,16 +449,9 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); - - /* irq for tps65010 chip */ - omap_cfg_reg(W4_GPIO58); - if (gpio_request(58, "tps65010") == 0) - gpio_direction_input(58); - -#ifdef CONFIG_I2C_BOARDINFO - i2c_register_board_info(1, h2_i2c_board_info, - ARRAY_SIZE(h2_i2c_board_info)); -#endif + omap_register_i2c_bus(1, 100, h2_i2c_board_info, + ARRAY_SIZE(h2_i2c_board_info)); + h2_mmc_init(); } static void __init h2_map_io(void) @@ -480,22 +459,6 @@ static void __init h2_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h2_tps_init(void) -{ - if (!machine_is_omap_h2()) - return 0; - - /* gpio3 for SD, gpio4 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65010_set_low_pwr(ON); - return 0; -} -fs_initcall(h2_tps_init); -#endif - MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c new file mode 100644 index 000000000000..66ecc437928f --- /dev/null +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -0,0 +1,114 @@ +/* + * linux/arch/arm/mach-omap1/board-h3-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Felipe Balbi + * + * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is: + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int h3_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int h3_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ + int ret = 0; + +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + /* Treated on upper level */ + + return bus_mode; +} + +static int h3_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int h3_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void h3_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data h3_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = h3_mmc_late_init, + .cleanup = h3_mmc_cleanup, + .slots[0] = { + .set_power = h3_mmc_set_power, + .set_bus_mode = h3_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = h3_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init h3_mmc_init(void) +{ + omap_set_mmc_info(1, &h3_mmc_data); +} + +#else + +void __init h3_mmc_init(void) +{ +} + +void h3_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 056519860565..6fc516855a8c 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include #include @@ -50,8 +51,6 @@ #include #include -extern int omap_gpio_init(void); - static int h3_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -179,7 +178,7 @@ static struct mtd_partition nand_partitions[] = { }; /* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), @@ -387,18 +386,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - //.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ + /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ }; static struct omap_alsa_codec_config alsa_config = { .name = "H3 TSC2101", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // tsc2101_configure, - .codec_set_samplerate = NULL, // tsc2101_set_samplerate, - .codec_clock_setup = NULL, // tsc2101_clock_setup, - .codec_clock_on = NULL, // tsc2101_clock_on, - .codec_clock_off = NULL, // tsc2101_clock_off, - .get_default_samplerate = NULL, // tsc2101_get_default_samplerate, + .codec_configure_dev = NULL, /* tsc2101_configure, */ + .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ + .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ + .codec_clock_on = NULL, /* tsc2101_clock_on, */ + .codec_clock_off = NULL, /* tsc2101_clock_off, */ + .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ }; static struct platform_device h3_mcbsp1_device = { @@ -436,12 +435,13 @@ static struct omap_usb_config h3_usb_config __initdata = { static struct omap_mmc_config h3_mmc_config __initdata = { .mmc[0] = { - .enabled = 1, - .power_pin = -1, /* tps65010 GPIO4 */ - .switch_pin = OMAP_MPUIO(1), - }, + .enabled = 1, + .wire4 = 1, + }, }; +extern struct omap_mmc_platform_data h3_mmc_data; + static struct omap_uart_config h3_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; @@ -450,29 +450,28 @@ static struct omap_lcd_config h3_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel h3_config[] = { +static struct omap_board_config_kernel h3_config[] __initdata = { { OMAP_TAG_USB, &h3_usb_config }, { OMAP_TAG_MMC, &h3_mmc_config }, { OMAP_TAG_UART, &h3_uart_config }, { OMAP_TAG_LCD, &h3_lcd_config }, }; -static struct i2c_board_info __initdata h3_i2c_board_info[] = { +static struct omap_gpio_switch h3_gpio_switches[] __initdata = { { - I2C_BOARD_INFO("tps65010", 0x48), - .type = "tps65013", - /* .irq = OMAP_GPIO_IRQ(??), */ + .name = "mmc_slot", + .gpio = OMAP_MPUIO(1), + .type = OMAP_GPIO_SWITCH_TYPE_COVER, + .debounce_rising = 100, + .debounce_falling = 0, + .notify = h3_mmc_slot_cover_handler, + .notify_data = NULL, }, - /* TODO when driver support is ready: - * - isp1301 OTG transceiver - * - optional ov9640 camera sensor at 0x30 - * - ... - */ }; #define H3_NAND_RB_GPIO_PIN 10 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(H3_NAND_RB_GPIO_PIN); } @@ -500,13 +499,14 @@ static void __init h3_init(void) omap_cfg_reg(V2_1710_GPIO10); platform_add_devices(devices, ARRAY_SIZE(devices)); + spi_register_board_info(h3_spi_board_info, + ARRAY_SIZE(h3_spi_board_info)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); - - /* FIXME setup irq for tps65013 chip */ - i2c_register_board_info(1, h3_i2c_board_info, - ARRAY_SIZE(h3_i2c_board_info)); + omap_register_i2c_bus(1, 100, h3_i2c_board_info, + ARRAY_SIZE(h3_i2c_board_info)); + h3_mmc_init(); } static void __init h3_init_smc91x(void) @@ -531,23 +531,6 @@ static void __init h3_map_io(void) omap1_map_common_io(); } -#ifdef CONFIG_TPS65010 -static int __init h3_tps_init(void) -{ - if (!machine_is_omap_h3()) - return 0; - - /* gpio4 for SD, gpio3 for VDD_DSP */ - /* FIXME send power to DSP iff it's configured */ - - /* Enable LOW_PWR */ - tps65013_set_low_pwr(ON); - - return 0; -} -fs_initcall(h3_tps_init); -#endif - MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 7d2d8af155a3..4b8ae3ee0d05 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OMAP Innovator AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device innovator_mcbsp1_device = { @@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = { .otg = 2, #ifdef CONFIG_USB_GADGET_OMAP - .hmc_mode = 19, // 0:host(off) 1:dev|otg 2:disabled - // .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback) + .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ + /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ - .hmc_mode = 20, // 1:dev|otg(off) 1:host 2:disabled + .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */ #endif .pins[1] = 3, @@ -411,6 +411,7 @@ static void __init innovator_init(void) omap_board_config = innovator_config; omap_board_config_size = ARRAY_SIZE(innovator_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init innovator_map_io(void) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e2c8ffd75cff..bcb984f2300f 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -189,7 +189,7 @@ static struct omap_mmc_config nokia770_mmc_config __initdata = { }, }; -static struct omap_board_config_kernel nokia770_config[] = { +static struct omap_board_config_kernel nokia770_config[] __initdata = { { OMAP_TAG_USB, NULL }, { OMAP_TAG_MMC, &nokia770_mmc_config }, }; @@ -330,6 +330,7 @@ static void __init omap_nokia770_init(void) omap_board_config_size = ARRAY_SIZE(nokia770_config); omap_gpio_init(); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); omap_dsp_init(); ads7846_dev_init(); mipid_dev_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 84333440008c..5279e35a8aec 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "OSK AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device osk5912_mcbsp1_device = { @@ -253,7 +253,7 @@ static struct omap_lcd_config osk_lcd_config __initdata = { }; #endif -static struct omap_board_config_kernel osk_config[] = { +static struct omap_board_config_kernel osk_config[] __initdata = { { OMAP_TAG_USB, &osk_usb_config }, { OMAP_TAG_UART, &osk_uart_config }, #ifdef CONFIG_OMAP_OSK_MISTRAL @@ -392,7 +392,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(W13_1610_CCP_CLKM); omap_cfg_reg(Y12_1610_CCP_CLKP); /* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */ - // omap_cfg_reg(Y14_1610_CCP_DATAM); + /* omap_cfg_reg(Y14_1610_CCP_DATAM); */ omap_cfg_reg(W14_1610_CCP_DATAP); /* CAM_PWDN */ @@ -404,8 +404,8 @@ static void __init osk_mistral_init(void) pr_debug("OSK+Mistral: CAM_PWDN is awol\n"); - // omap_cfg_reg(P19_1610_GPIO6); // BUSY - omap_cfg_reg(P20_1610_GPIO4); // PENIRQ + /* omap_cfg_reg(P19_1610_GPIO6); */ /* BUSY */ + omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -473,10 +473,9 @@ static void __init osk_init(void) if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) gpio_direction_input(OMAP_MPUIO(1)); - i2c_register_board_info(1, osk_i2c_board_info, - ARRAY_SIZE(osk_i2c_board_info)); - omap_serial_init(); + omap_register_i2c_bus(1, 400, osk_i2c_board_info, + ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); } diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 2f9d00a00135..ca1a4bf78a10 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -10,6 +10,8 @@ * Maintainers : http://palmtelinux.sf.net * palmtelinux-developpers@lists.sf.net * + * Copyright (c) 2006 Andrzej Zaborowski + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -24,8 +26,8 @@ #include #include #include +#include -#include #include #include #include @@ -51,11 +53,11 @@ static void __init omap_palmte_init_irq(void) omap_gpio_init(); } -static int palmte_keymap[] = { - KEY(0, 0, KEY_F1), - KEY(0, 1, KEY_F2), - KEY(0, 2, KEY_F3), - KEY(0, 3, KEY_F4), +static const int palmte_keymap[] = { + KEY(0, 0, KEY_F1), /* Calendar */ + KEY(0, 1, KEY_F2), /* Contacts */ + KEY(0, 2, KEY_F3), /* Tasks List */ + KEY(0, 3, KEY_F4), /* Note Pad */ KEY(0, 4, KEY_POWER), KEY(1, 0, KEY_LEFT), KEY(1, 1, KEY_DOWN), @@ -68,7 +70,7 @@ static int palmte_keymap[] = { static struct omap_kp_platform_data palmte_kp_data = { .rows = 8, .cols = 8, - .keymap = palmte_keymap, + .keymap = (int *) palmte_keymap, .rep = 1, .delay = 12, }; @@ -180,7 +182,7 @@ static struct platform_device palmte_irda_device = { .resource = palmte_irda_resources, }; -static struct platform_device *devices[] __initdata = { +static struct platform_device *palmte_devices[] __initdata = { &palmte_rom_device, &palmte_kp_device, &palmte_lcd_device, @@ -273,7 +275,7 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) info->time = 0; } else { while (hi > lo + 1) { - mid = (hi + lo) >> 2; + mid = (hi + lo) >> 1; if (batt <= palmte_battery_sample[mid]) lo = mid; else @@ -321,7 +323,7 @@ static struct tsc2102_config palmte_tsc2102_config = { .alsa_config = &palmte_alsa_config, }; -static struct omap_board_config_kernel palmte_config[] = { +static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, { OMAP_TAG_LCD, &palmte_lcd_config }, @@ -339,74 +341,34 @@ static struct spi_board_info palmte_spi_info[] __initdata = { }, }; -/* Periodically check for changes on important input pins */ -struct timer_list palmte_pin_timer; -int prev_power, prev_headphones; - -static void palmte_pin_handler(unsigned long data) { - int power, headphones; - - power = !omap_get_gpio_datain(PALMTE_DC_GPIO); - headphones = omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - - if (power && !prev_power) - printk(KERN_INFO "PM: cable connected\n"); - else if (!power && prev_power) - printk(KERN_INFO "PM: cable disconnected\n"); - - if (headphones && !prev_headphones) { +static void palmte_headphones_detect(void *data, int state) +{ + if (state) { /* Headphones connected, disable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 0); printk(KERN_INFO "PM: speaker off\n"); - } else if (!headphones && prev_headphones) { + } else { /* Headphones unplugged, re-enable speaker */ omap_set_gpio_dataout(PALMTE_SPEAKER_GPIO, 1); printk(KERN_INFO "PM: speaker on\n"); } - - prev_power = power; - prev_headphones = headphones; - mod_timer(&palmte_pin_timer, jiffies + msecs_to_jiffies(500)); } -static void __init palmte_gpio_setup(void) +static void __init palmte_misc_gpio_setup(void) { - /* Set TSC2102 PINTDAV pin as input */ + /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1); - /* Monitor cable-connected signals */ - if (omap_request_gpio(PALMTE_DC_GPIO) || - omap_request_gpio(PALMTE_USB_OR_DC_GPIO) || - omap_request_gpio(PALMTE_USBDETECT_GPIO)) { + /* Set USB-or-DC-IN pin as input (unused) */ + if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } - omap_set_gpio_direction(PALMTE_DC_GPIO, 1); omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1); - omap_set_gpio_direction(PALMTE_USBDETECT_GPIO, 1); - - /* Set speaker-enable pin as output */ - if (omap_request_gpio(PALMTE_SPEAKER_GPIO)) { - printk(KERN_ERR "Could not reserve speaker GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_SPEAKER_GPIO, 0); - - /* Monitor the headphones-connected signal */ - if (omap_request_gpio(PALMTE_HEADPHONES_GPIO)) { - printk(KERN_ERR "Could not reserve headphones signal GPIO!\n"); - return; - } - omap_set_gpio_direction(PALMTE_HEADPHONES_GPIO, 1); - - prev_power = omap_get_gpio_datain(PALMTE_DC_GPIO); - prev_headphones = !omap_get_gpio_datain(PALMTE_HEADPHONES_GPIO); - setup_timer(&palmte_pin_timer, palmte_pin_handler, 0); - palmte_pin_handler(0); } static void __init omap_palmte_init(void) @@ -414,12 +376,12 @@ static void __init omap_palmte_init(void) omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); - platform_add_devices(devices, ARRAY_SIZE(devices)); + platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); - + palmte_misc_gpio_setup(); omap_serial_init(); - palmte_gpio_setup(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_palmte_map_io(void) diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index ed7094a70064..2a033689f9f4 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -144,12 +144,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = { static struct omap_alsa_codec_config alsa_config = { .name = "PalmTT AIC23", .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, // aic23_configure, - .codec_set_samplerate = NULL, // aic23_set_samplerate, - .codec_clock_setup = NULL, // aic23_clock_setup, - .codec_clock_on = NULL, // aic23_clock_on, - .codec_clock_off = NULL, // aic23_clock_off, - .get_default_samplerate = NULL, // aic23_get_default_samplerate, + .codec_configure_dev = NULL, /* aic23_configure, */ + .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ + .codec_clock_setup = NULL, /* aic23_clock_setup, */ + .codec_clock_on = NULL, /* aic23_clock_on, */ + .codec_clock_off = NULL, /* aic23_clock_off, */ + .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ }; static struct platform_device palmtt_mcbsp1_device = { @@ -312,7 +312,7 @@ static struct omap_uart_config palmtt_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_board_config_kernel palmtt_config[] = { +static struct omap_board_config_kernel palmtt_config[] __initdata = { { OMAP_TAG_USB, &palmtt_usb_config }, { OMAP_TAG_LCD, &palmtt_lcd_config }, { OMAP_TAG_UART, &palmtt_uart_config }, @@ -338,6 +338,7 @@ static void __init omap_palmtt_init(void) spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init omap_palmtt_map_io(void) diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index a9a0f6610c3d..156510777ffe 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -285,7 +285,7 @@ static struct omap_uart_config palmz71_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_board_config_kernel palmz71_config[] = { +static struct omap_board_config_kernel palmz71_config[] __initdata = { {OMAP_TAG_USB, &palmz71_usb_config}, {OMAP_TAG_MMC, &palmz71_mmc_config}, {OMAP_TAG_LCD, &palmz71_lcd_config}, @@ -363,6 +363,7 @@ omap_palmz71_init(void) spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); } diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 534dcfb9d263..94bc0745ab2c 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -133,7 +134,7 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct nand_platform_data nand_data = { +static struct omap_nand_platform_data nand_data = { .options = NAND_SAMSUNG_LP_OPTIONS, }; @@ -202,7 +203,7 @@ static struct platform_device *devices[] __initdata = { #define P2_NAND_RB_GPIO_PIN 62 -static int nand_dev_ready(struct nand_platform_data *data) +static int nand_dev_ready(struct omap_nand_platform_data *data) { return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN); } @@ -215,7 +216,7 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_board_config_kernel perseus2_config[] = { +static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_UART, &perseus2_uart_config }, { OMAP_TAG_LCD, &perseus2_lcd_config }, }; @@ -233,6 +234,7 @@ static void __init omap_perseus2_init(void) omap_board_config = perseus2_config; omap_board_config_size = ARRAY_SIZE(perseus2_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); } static void __init perseus2_init_smc91x(void) diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c new file mode 100644 index 000000000000..8c93d47719e8 --- /dev/null +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -0,0 +1,124 @@ +/* + * linux/arch/arm/mach-omap1/board-sx1-mmc.c + * + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * Author: Carlos Eduardo Aguiar + * + * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is: + * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#ifdef CONFIG_MMC_OMAP +static int slot_cover_open; +static struct device *mmc_device; + +static int sx1_mmc_set_power(struct device *dev, int slot, int power_on, + int vdd) +{ + int err; + u8 dat = 0; + +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1, + power_on ? "on" : "off", vdd); +#endif + + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + if (err < 0) + return err; + + if (power_on) + dat |= SOFIA_MMC_POWER; + else + dat &= ~SOFIA_MMC_POWER; + + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); +} + +static int sx1_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode) +{ +#ifdef CONFIG_MMC_DEBUG + dev_dbg(dev, "Set slot %d bus_mode %s\n", slot + 1, + bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull"); +#endif + if (slot != 0) { + dev_err(dev, "No such slot %d\n", slot + 1); + return -ENODEV; + } + + return 0; +} + +static int sx1_mmc_get_cover_state(struct device *dev, int slot) +{ + BUG_ON(slot != 0); + + return slot_cover_open; +} + +void sx1_mmc_slot_cover_handler(void *arg, int state) +{ + if (mmc_device == NULL) + return; + + slot_cover_open = state; + omap_mmc_notify_cover_event(mmc_device, 0, state); +} + +static int sx1_mmc_late_init(struct device *dev) +{ + int ret = 0; + + mmc_device = dev; + + return ret; +} + +static void sx1_mmc_cleanup(struct device *dev) +{ +} + +static struct omap_mmc_platform_data sx1_mmc_data = { + .nr_slots = 1, + .switch_slot = NULL, + .init = sx1_mmc_late_init, + .cleanup = sx1_mmc_cleanup, + .slots[0] = { + .set_power = sx1_mmc_set_power, + .set_bus_mode = sx1_mmc_set_bus_mode, + .get_ro = NULL, + .get_cover_state = sx1_mmc_get_cover_state, + .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 | + MMC_VDD_32_33 | MMC_VDD_33_34, + .name = "mmcblk", + }, +}; + +void __init sx1_mmc_init(void) +{ + omap_set_mmc_info(1, &sx1_mmc_data); +} + +#else + +void __init sx1_mmc_init(void) +{ +} + +void sx1_mmc_slot_cover_handler(void *arg, int state) +{ +} +#endif diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2743d639aa05..1c7f09aedf07 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -44,7 +44,7 @@ #include /* Write to I2C device */ -int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) { struct i2c_adapter *adap; int err; @@ -67,7 +67,7 @@ int i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) } /* Read from I2C device */ -int i2c_read_byte(u8 devaddr, u8 regoffset, u8 * value) +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value) { struct i2c_adapter *adap; int err; @@ -101,66 +101,55 @@ int sx1_setkeylight(u8 keylight) { if (keylight > SOFIA_MAX_LIGHT_VAL) keylight = SOFIA_MAX_LIGHT_VAL; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); } /* get current keylight intensity */ int sx1_getkeylight(u8 * keylight) { - return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); + return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight); } /* set LCD backlight intensity */ int sx1_setbacklight(u8 backlight) { if (backlight > SOFIA_MAX_LIGHT_VAL) backlight = SOFIA_MAX_LIGHT_VAL; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, + backlight); } /* get current LCD backlight intensity */ int sx1_getbacklight (u8 * backlight) { - return i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, backlight); + return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG, + backlight); } /* set LCD backlight power on/off */ int sx1_setmmipower(u8 onoff) { int err; u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); if (err < 0) return err; if (onoff) dat |= SOFIA_MMILIGHT_POWER; else dat &= ~SOFIA_MMILIGHT_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); -} -/* set MMC power on/off */ -int sx1_setmmcpower(u8 onoff) -{ - int err; - u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); - if (err < 0) - return err; - if (onoff) - dat |= SOFIA_MMC_POWER; - else - dat &= ~SOFIA_MMC_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); } + /* set USB power on/off */ int sx1_setusbpower(u8 onoff) { int err; u8 dat = 0; - err = i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); + err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat); if (err < 0) return err; if (onoff) dat |= SOFIA_USB_POWER; else dat &= ~SOFIA_USB_POWER; - return i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); + return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat); } EXPORT_SYMBOL(sx1_setkeylight); @@ -168,7 +157,6 @@ EXPORT_SYMBOL(sx1_getkeylight); EXPORT_SYMBOL(sx1_setbacklight); EXPORT_SYMBOL(sx1_getbacklight); EXPORT_SYMBOL(sx1_setmmipower); -EXPORT_SYMBOL(sx1_setmmcpower); EXPORT_SYMBOL(sx1_setusbpower); /*----------- Keypad -------------------------*/ @@ -280,21 +268,6 @@ static struct omap_mcbsp_reg_cfg mcbsp1_regs = { /* PCR0 =0f0f */ }; -/* TODO: PCM interface - McBSP2 */ -static struct omap_mcbsp_reg_cfg mcbsp2_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), /* SPCR2=F1 */ - .spcr1 = RINTM(3) | RRST, /* SPCR1=30 */ - .rcr2 = 0, /* RCR2 =00 */ - .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1 = 140 */ - .xcr2 = 0, /* XCR2 = 0 */ - .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ - .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ - .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ - .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /* PCR0=0f0f */ - /* mcbsp: slave */ -}; - static struct omap_alsa_codec_config sx1_alsa_config = { .name = "SX1 EGold", .mcbsp_regs_alsa = &mcbsp1_regs, @@ -407,11 +380,8 @@ static struct omap_usb_config sx1_usb_config __initdata = { static struct omap_mmc_config sx1_mmc_config __initdata = { .mmc [0] = { - .enabled = 1, + .enabled = 1, .wire4 = 0, - .wp_pin = -1, - .power_pin = -1, /* power is in Sofia */ - .switch_pin = OMAP_MPUIO(3), }, }; @@ -440,13 +410,15 @@ static struct omap_uart_config sx1_uart_config __initdata = { .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), }; -static struct omap_board_config_kernel sx1_config[] = { +static struct omap_board_config_kernel sx1_config[] __initdata = { { OMAP_TAG_USB, &sx1_usb_config }, { OMAP_TAG_MMC, &sx1_mmc_config }, { OMAP_TAG_LCD, &sx1_lcd_config }, { OMAP_TAG_UART, &sx1_uart_config }, }; + /*-----------------------------------------*/ + static void __init omap_sx1_init(void) { platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); @@ -454,6 +426,8 @@ static void __init omap_sx1_init(void) omap_board_config = sx1_config; omap_board_config_size = ARRAY_SIZE(sx1_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); + sx1_mmc_init(); /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c82a1cd20ad4..5c00b3f39cdd 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -34,9 +34,6 @@ #include #include -extern void omap_init_time(void); -extern int omap_gpio_init(void); - static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), @@ -198,6 +195,7 @@ static void __init voiceblue_init(void) omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); /* There is a good chance board is going up, so enable power LED * (it is connected through invertor) */ diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 5d9faa68d2ec..4ea2933f887d 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,4 +1,3 @@ -//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text) /* * linux/arch/arm/mach-omap1/clock.c * @@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) /* FIXME: This clock seems to be necessary but no-one * has asked for its activation. */ - if (clk == &tc2_ck // FIX: pm.c (SRAM), CCP, Camera - || clk == &ck_dpll1out.clk // FIX: SoSSI, SSR - || clk == &arm_gpio_ck // FIX: GPIO code for 1510 + if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ + || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ + || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ ) { printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", clk->name); diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c index 6939d5e7569a..026685ed461a 100644 --- a/arch/arm/mach-omap1/leds-osk.c +++ b/arch/arm/mach-omap1/leds-osk.c @@ -82,7 +82,7 @@ static void mistral_setled(void) red = 1; else if (hw_led_state & IDLE_LED) green = 1; - // else both sides are disabled + /* else both sides are disabled */ omap_set_gpio_dataout(GPIO_LED_GREEN, green); omap_set_gpio_dataout(GPIO_LED_RED, red); @@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt) case led_stop: led_state &= ~LED_STATE_ENABLED; hw_led_state = 0; - // NOTE: work may still be pending!! + /* NOTE: work may still be pending!! */ break; case led_claim: diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index d3abf5609902..bad1e7152d8e 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -51,7 +51,7 @@ static inline void mbox_write_reg(unsigned int val, unsigned int reg) } /* msg */ -static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) +static mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) { struct omap_mbox1_fifo *fifo = &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; @@ -63,7 +63,7 @@ static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) return msg; } -static inline void +static void omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) { struct omap_mbox1_fifo *fifo = @@ -73,12 +73,12 @@ omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) mbox_write_reg(msg >> 16, fifo->cmd); } -static inline int omap1_mbox_fifo_empty(struct omap_mbox *mbox) +static int omap1_mbox_fifo_empty(struct omap_mbox *mbox) { return 0; } -static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox) +static int omap1_mbox_fifo_full(struct omap_mbox *mbox) { struct omap_mbox1_fifo *fifo = &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; @@ -87,21 +87,21 @@ static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox) } /* irq */ -static inline void +static void omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_RX) enable_irq(mbox->irq); } -static inline void +static void omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_RX) disable_irq(mbox->irq); } -static inline int +static int omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { if (irq == IRQ_TX) diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 06b7e54a0128..8eb5dcdaead2 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -57,7 +57,6 @@ #include #include #include -#include #include static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; @@ -67,6 +66,8 @@ static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; +#ifdef CONFIG_OMAP_32K_TIMER + static unsigned short enable_dyn_sleep = 1; static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr, @@ -91,7 +92,8 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr, static struct kobj_attribute sleep_while_idle_attr = __ATTR(sleep_while_idle, 0644, idle_show, idle_store); -static void (*omap_sram_idle)(void) = NULL; +#endif + static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; /* @@ -104,9 +106,7 @@ void omap_pm_idle(void) { extern __u32 arm_idlect1_mask; __u32 use_idlect1 = arm_idlect1_mask; -#ifndef CONFIG_OMAP_MPU_TIMER - int do_sleep; -#endif + int do_sleep = 0; local_irq_disable(); local_fiq_disable(); @@ -128,7 +128,6 @@ void omap_pm_idle(void) use_idlect1 = use_idlect1 & ~(1 << 9); #else - do_sleep = 0; while (enable_dyn_sleep) { #ifdef CONFIG_CBUS_TAHVO_USB @@ -141,6 +140,8 @@ void omap_pm_idle(void) break; } +#endif + #ifdef CONFIG_OMAP_DM_TIMER use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1); #endif @@ -168,7 +169,6 @@ void omap_pm_idle(void) } omap_sram_suspend(omap_readl(ARM_IDLECT1), omap_readl(ARM_IDLECT2)); -#endif local_fiq_enable(); local_irq_enable(); @@ -661,7 +661,10 @@ static struct platform_suspend_ops omap_pm_ops ={ static int __init omap_pm_init(void) { + +#ifdef CONFIG_OMAP_32K_TIMER int error; +#endif printk("Power Management for TI OMAP.\n"); @@ -671,23 +674,17 @@ static int __init omap_pm_init(void) * memory the MPU can see when it wakes up. */ if (cpu_is_omap730()) { - omap_sram_idle = omap_sram_push(omap730_idle_loop_suspend, - omap730_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, omap730_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { - omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend, - omap1510_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); } else if (cpu_is_omap16xx()) { - omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend, - omap1610_idle_loop_suspend_sz); omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend, omap1610_cpu_suspend_sz); } - if (omap_sram_idle == NULL || omap_sram_suspend == NULL) { + if (omap_sram_suspend == NULL) { printk(KERN_ERR "PM not initialized: Missing SRAM support\n"); return -ENODEV; } @@ -719,9 +716,11 @@ static int __init omap_pm_init(void) omap_pm_init_proc(); #endif +#ifdef CONFIG_OMAP_32K_TIMER error = sysfs_create_file(power_kobj, &sleep_while_idle_attr); if (error) printk(KERN_ERR "sysfs_create_file failed: %d\n", error); +#endif if (cpu_is_omap16xx()) { /* configure LOW_PWR pin */ diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index abef33d10f01..68f5b39030b6 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -39,167 +39,6 @@ .text -/* - * Forces OMAP into idle state - * - * omapXXXX_idle_loop_suspend() - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of slightly different configuration values we have - * processor specific functions here. - */ - -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP730_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_730: subs r5, r5, #1 - bne l_730 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap730_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap730_idle_loop_suspend_sz) - .word . - omap730_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP15XX -ENTRY(omap1510_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510: subs r5, r5, #1 - bne l_1510 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1510_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1510_idle_loop_suspend_sz) - .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP15XX */ - -#if defined(CONFIG_ARCH_OMAP16XX) -ENTRY(omap1610_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610: subs r5, r5, #1 - bne l_1610 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1610_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1610_idle_loop_suspend_sz) - .word . - omap1610_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ /* * Forces OMAP into deep sleep state diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c index 488da3811a68..2e2fd63643c3 100644 --- a/arch/arm/mach-orion/addr-map.c +++ b/arch/arm/mach-orion/addr-map.c @@ -265,15 +265,15 @@ void __init orion_setup_cpu_wins(void) } /* - * Setup windows for PCI+PCIE IO+MAM space + * Setup windows for PCI+PCIe IO+MEM space. */ - orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_BASE, - ORION_PCIE_IO_SIZE, ORION_PCIE_IO_REMAP); - orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_BASE, - ORION_PCI_IO_SIZE, ORION_PCI_IO_REMAP); - orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_BASE, + orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE, + ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE); + orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE, + ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE); + orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE, ORION_PCIE_MEM_SIZE, -1); - orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_BASE, + orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE, ORION_PCI_MEM_SIZE, -1); } diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c index 5e20b6b32508..5f0ee4b8a9b7 100644 --- a/arch/arm/mach-orion/common.c +++ b/arch/arm/mach-orion/common.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include "common.h" /***************************************************************************** @@ -27,26 +27,26 @@ ****************************************************************************/ static struct map_desc orion_io_desc[] __initdata = { { - .virtual = ORION_REGS_BASE, - .pfn = __phys_to_pfn(ORION_REGS_BASE), + .virtual = ORION_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_REGS_PHYS_BASE), .length = ORION_REGS_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_IO_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_IO_BASE), + .virtual = ORION_PCIE_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE), .length = ORION_PCIE_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCI_IO_BASE, - .pfn = __phys_to_pfn(ORION_PCI_IO_BASE), + .virtual = ORION_PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCI_IO_PHYS_BASE), .length = ORION_PCI_IO_SIZE, .type = MT_DEVICE }, { - .virtual = ORION_PCIE_WA_BASE, - .pfn = __phys_to_pfn(ORION_PCIE_WA_BASE), + .virtual = ORION_PCIE_WA_VIRT_BASE, + .pfn = __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE), .length = ORION_PCIE_WA_SIZE, .type = MT_DEVICE }, @@ -63,8 +63,8 @@ void __init orion_map_io(void) static struct resource orion_uart_resources[] = { { - .start = UART0_BASE, - .end = UART0_BASE + 0xff, + .start = UART0_PHYS_BASE, + .end = UART0_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { @@ -73,8 +73,8 @@ static struct resource orion_uart_resources[] = { .flags = IORESOURCE_IRQ, }, { - .start = UART1_BASE, - .end = UART1_BASE + 0xff, + .start = UART1_PHYS_BASE, + .end = UART1_PHYS_BASE + 0xff, .flags = IORESOURCE_MEM, }, { @@ -86,8 +86,8 @@ static struct resource orion_uart_resources[] = { static struct plat_serial8250_port orion_uart_data[] = { { - .mapbase = UART0_BASE, - .membase = (char *)UART0_BASE, + .mapbase = UART0_PHYS_BASE, + .membase = (char *)UART0_VIRT_BASE, .irq = IRQ_ORION_UART0, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -95,8 +95,8 @@ static struct plat_serial8250_port orion_uart_data[] = { .uartclk = ORION_TCLK, }, { - .mapbase = UART1_BASE, - .membase = (char *)UART1_BASE, + .mapbase = UART1_PHYS_BASE, + .membase = (char *)UART1_VIRT_BASE, .irq = IRQ_ORION_UART1, .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -122,8 +122,8 @@ static struct platform_device orion_uart = { static struct resource orion_ehci0_resources[] = { { - .start = ORION_USB0_REG_BASE, - .end = ORION_USB0_REG_BASE + SZ_4K, + .start = ORION_USB0_PHYS_BASE, + .end = ORION_USB0_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { @@ -135,8 +135,8 @@ static struct resource orion_ehci0_resources[] = { static struct resource orion_ehci1_resources[] = { { - .start = ORION_USB1_REG_BASE, - .end = ORION_USB1_REG_BASE + SZ_4K, + .start = ORION_USB1_PHYS_BASE, + .end = ORION_USB1_PHYS_BASE + SZ_4K, .flags = IORESOURCE_MEM, }, { @@ -177,8 +177,8 @@ static struct platform_device orion_ehci1 = { static struct resource orion_eth_shared_resources[] = { { - .start = ORION_ETH_REG_BASE, - .end = ORION_ETH_REG_BASE + 0xffff, + .start = ORION_ETH_PHYS_BASE, + .end = ORION_ETH_PHYS_BASE + 0xffff, .flags = IORESOURCE_MEM, }, }; @@ -227,8 +227,8 @@ static struct mv64xxx_i2c_pdata orion_i2c_pdata = { static struct resource orion_i2c_resources[] = { { .name = "i2c base", - .start = I2C_BASE, - .end = I2C_BASE + 0x20 -1, + .start = I2C_PHYS_BASE, + .end = I2C_PHYS_BASE + 0x20 -1, .flags = IORESOURCE_MEM, }, { @@ -249,6 +249,40 @@ static struct platform_device orion_i2c = { }, }; +/***************************************************************************** + * Sata port + ****************************************************************************/ +static struct resource orion_sata_resources[] = { + { + .name = "sata base", + .start = ORION_SATA_PHYS_BASE, + .end = ORION_SATA_PHYS_BASE + 0x5000 - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "sata irq", + .start = IRQ_ORION_SATA, + .end = IRQ_ORION_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion_sata = { + .name = "sata_mv", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(orion_sata_resources), + .resource = orion_sata_resources, +}; + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data) +{ + orion_sata.dev.platform_data = sata_data; + platform_device_register(&orion_sata); +} + /***************************************************************************** * General ****************************************************************************/ diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h index 06c10c06f03e..10154ec885df 100644 --- a/arch/arm/mach-orion/common.h +++ b/arch/arm/mach-orion/common.h @@ -75,4 +75,12 @@ struct mv643xx_eth_platform_data; void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data); +/* + * Orion Sata platform_data, used by machine-setup + */ + +struct mv_sata_platform_data; + +void __init orion_sata_init(struct mv_sata_platform_data *sata_data); + #endif /* __ARCH_ORION_COMMON_H__ */ diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion/db88f5281-setup.c index cb2a95ce5b57..5ef44e1a2d36 100644 --- a/arch/arm/mach-orion/db88f5281-setup.c +++ b/arch/arm/mach-orion/db88f5281-setup.c @@ -354,8 +354,8 @@ static void __init db88f5281_init(void) MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board") /* Maintainer: Tzachi Perelstein */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xfffc, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, .init_machine = db88f5281_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion/dns323-setup.c index c8a806f249c6..02b280c24820 100644 --- a/arch/arm/mach-orion/dns323-setup.c +++ b/arch/arm/mach-orion/dns323-setup.c @@ -259,8 +259,8 @@ static void __init dns323_init(void) * * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* set MPP to 0 as D-Link's 2.6.12.6 kernel did */ @@ -312,8 +312,8 @@ static void __init dns323_init(void) /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */ MACHINE_START(DNS323, "D-Link DNS-323") /* Maintainer: Herbert Valerio Riedel */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = dns323_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion/kurobox_pro-setup.c index 2d812ed6b5c7..6817aca4aa26 100644 --- a/arch/arm/mach-orion/kurobox_pro-setup.c +++ b/arch/arm/mach-orion/kurobox_pro-setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -166,6 +167,13 @@ static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = { .addr = 0x32, }; +/***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data kurobox_pro_sata_data = { + .n_ports = 2, +}; + /***************************************************************************** * General Setup ****************************************************************************/ @@ -192,8 +200,8 @@ static void __init kurobox_pro_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -220,12 +228,13 @@ static void __init kurobox_pro_init(void) platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices)); i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1); orion_eth_init(&kurobox_pro_eth_data); + orion_sata_init(&kurobox_pro_sata_data); } MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro") /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = kurobox_pro_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c index 0498d7c69b30..b109bb46681e 100644 --- a/arch/arm/mach-orion/pci.c +++ b/arch/arm/mach-orion/pci.c @@ -156,7 +156,7 @@ static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, orion_pcie_id(&dev, &rev); if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) { /* extended register space */ - pcie_addr = ORION_PCIE_WA_BASE; + pcie_addr = ORION_PCIE_WA_VIRT_BASE; pcie_addr |= PCIE_CONF_BUS(bus->number) | PCIE_CONF_DEV(PCI_SLOT(devfn)) | PCIE_CONF_FUNC(PCI_FUNC(devfn)) | @@ -241,7 +241,7 @@ static int orion_pcie_setup(struct pci_sys_data *sys) */ res[0].name = "PCI-EX I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCIE_IO_REMAP; + res[0].start = ORION_PCIE_IO_BUS_BASE; res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIE IO resource failed\n"); @@ -252,7 +252,7 @@ static int orion_pcie_setup(struct pci_sys_data *sys) */ res[1].name = "PCI-EX Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCIE_MEM_BASE; + res[1].start = ORION_PCIE_MEM_PHYS_BASE; res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIE Memory resource failed\n"); @@ -477,7 +477,7 @@ static int orion_pci_setup(struct pci_sys_data *sys) */ res[0].name = "PCI I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = ORION_PCI_IO_REMAP; + res[0].start = ORION_PCI_IO_BUS_BASE; res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCI IO resource failed\n"); @@ -488,7 +488,7 @@ static int orion_pci_setup(struct pci_sys_data *sys) */ res[1].name = "PCI Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = ORION_PCI_MEM_BASE; + res[1].start = ORION_PCI_MEM_PHYS_BASE; res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCI Memory resource failed\n"); diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion/rd88f5182-setup.c index 026d74325d01..e851b8ca5ac6 100644 --- a/arch/arm/mach-orion/rd88f5182-setup.c +++ b/arch/arm/mach-orion/rd88f5182-setup.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -229,6 +230,13 @@ static struct i2c_board_info __initdata rd88f5182_i2c_rtc = { .addr = 0x68, }; +/***************************************************************************** + * Sata + ****************************************************************************/ +static struct mv_sata_platform_data rd88f5182_sata_data = { + .n_ports = 2, +}; + /***************************************************************************** * General Setup ****************************************************************************/ @@ -255,8 +263,8 @@ static void __init rd88f5182_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -292,12 +300,13 @@ static void __init rd88f5182_init(void) platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices)); i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1); orion_eth_init(&rd88f5182_eth_data); + orion_sata_init(&rd88f5182_sata_data); } MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design") /* Maintainer: Ronen Shitrit */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = rd88f5182_init, .map_io = orion_map_io, diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion/ts209-setup.c index e3e930efd155..306dbcd1e37b 100644 --- a/arch/arm/mach-orion/ts209-setup.c +++ b/arch/arm/mach-orion/ts209-setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -232,6 +233,14 @@ static struct platform_device qnap_ts209_button_device = { }; /***************************************************************************** + * SATA + ****************************************************************************/ +static struct mv_sata_platform_data qnap_ts209_sata_data = { + .n_ports = 2, +}; + +/***************************************************************************** + * General Setup ****************************************************************************/ @@ -244,7 +253,7 @@ static struct platform_device *qnap_ts209_devices[] __initdata = { * QNAP TS-[12]09 specific power off method via UART1-attached PIC */ -#define UART1_REG(x) (UART1_BASE + ((UART_##x) << 2)) +#define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2)) static void qnap_ts209_power_off(void) { @@ -282,8 +291,8 @@ static void __init qnap_ts209_init(void) /* * Open a special address decode windows for the PCIE WA. */ - orion_write(ORION_REGS_BASE | 0x20074, ORION_PCIE_WA_BASE); - orion_write(ORION_REGS_BASE | 0x20070, (0x7941 | + orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE); + orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16)); /* @@ -321,12 +330,13 @@ static void __init qnap_ts209_init(void) ARRAY_SIZE(qnap_ts209_devices)); i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1); orion_eth_init(&qnap_ts209_eth_data); + orion_sata_init(&qnap_ts209_sata_data); } MACHINE_START(TS209, "QNAP TS-109/TS-209") /* Maintainer: Byron Bradley */ - .phys_io = ORION_REGS_BASE, - .io_pg_offst = ((ORION_REGS_BASE) >> 18) & 0xFFFC, + .phys_io = ORION_REGS_PHYS_BASE, + .io_pg_offst = ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC, .boot_params = 0x00000100, .init_machine = qnap_ts209_init, .map_io = orion_map_io, diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 2549129aabc6..ce17df31b845 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o +obj-$(CONFIG_I2C_OMAP) += i2c.o diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index dcbba07cf98a..a46676db8113 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -6,7 +6,7 @@ * DMA channel linking for 1610 by Samuel Ortiz * Graphics DMA and LCD DMA graphics tranformations * by Imre Deak - * OMAP2 support Copyright (C) 2004-2005 Texas Instruments, Inc. + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. * Merged to support both OMAP1 and OMAP2 by Tony Lindgren * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. * @@ -33,12 +33,14 @@ #include -#define DEBUG_PRINTS -#undef DEBUG_PRINTS -#ifdef DEBUG_PRINTS -#define debug_printk(x) printk x -#else -#define debug_printk(x) +#undef DEBUG + +#ifndef CONFIG_ARCH_OMAP1 +enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, + DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED +}; + +enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 @@ -57,9 +59,66 @@ struct omap_dma_lch { const char *dev_name; void (* callback)(int lch, u16 ch_status, void *data); void *data; + +#ifndef CONFIG_ARCH_OMAP1 + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + + int status; +#endif long flags; }; +#ifndef CONFIG_ARCH_OMAP1 +struct dma_link_info { + int *linked_dmach_q; + int no_of_lchs_linked; + + int q_count; + int q_tail; + int q_head; + + int chain_state; + int chain_mode; + +}; + +static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT]; + +/* Chain handling macros */ +#define OMAP_DMA_CHAIN_QINIT(chain_id) \ + do { \ + dma_linked_lch[chain_id].q_head = \ + dma_linked_lch[chain_id].q_tail = \ + dma_linked_lch[chain_id].q_count = 0; \ + } while (0) +#define OMAP_DMA_CHAIN_QFULL(chain_id) \ + (dma_linked_lch[chain_id].no_of_lchs_linked == \ + dma_linked_lch[chain_id].q_count) +#define OMAP_DMA_CHAIN_QLAST(chain_id) \ + do { \ + ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \ + dma_linked_lch[chain_id].q_count) \ + } while (0) +#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \ + (0 == dma_linked_lch[chain_id].q_count) +#define __OMAP_DMA_CHAIN_INCQ(end) \ + ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked) +#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \ + dma_linked_lch[chain_id].q_count--; \ + } while (0) + +#define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \ + do { \ + __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \ + dma_linked_lch[chain_id].q_count++; \ + } while (0) +#endif static int dma_chan_count; static spinlock_t dma_chan_lock; @@ -73,6 +132,10 @@ static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = { INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD }; +static inline void disable_lnk(int lch); +static void omap_disable_channel_irq(int lch); +static inline void omap_enable_channel_irq(int lch); + #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ __FUNCTION__); @@ -148,7 +211,7 @@ void omap_set_dma_priority(int lch, int dst_port, int priority) omap_writel(l, reg); } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { if (priority) OMAP_DMA_CCR_REG(lch) |= (1 << 6); else @@ -173,7 +236,7 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, OMAP1_DMA_CCR2_REG(lch) |= 1 << 2; } - if (cpu_is_omap24xx() && dma_trigger) { + if (cpu_class_is_omap2() && dma_trigger) { u32 val = OMAP_DMA_CCR_REG(lch); val &= ~(3 << 19); @@ -213,7 +276,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) BUG_ON(omap_dma_in_1510_mode()); - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -245,7 +308,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16); OMAP_DMA_CSDP_REG(lch) |= (mode << 16); } @@ -269,7 +332,7 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode, OMAP1_DMA_CSSA_L_REG(lch) = src_start; } - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP2_DMA_CSSA_REG(lch) = src_start; OMAP_DMA_CSEI_REG(lch) = src_ei; @@ -289,11 +352,14 @@ void omap_set_dma_params(int lch, struct omap_dma_channel_params * params) omap_set_dma_dest_params(lch, params->dst_port, params->dst_amode, params->dst_start, params->dst_ei, params->dst_fi); + if (params->read_prio || params->write_prio) + omap_dma_set_prio_lch(lch, params->read_prio, + params->write_prio); } void omap_set_dma_src_index(int lch, int eidx, int fidx) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -317,13 +383,13 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x2; break; } @@ -332,7 +398,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) * fall through */ case OMAP_DMA_DATA_BURST_16: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x3; break; } @@ -363,7 +429,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, OMAP1_DMA_CDSA_L_REG(lch) = dest_start; } - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP2_DMA_CDSA_REG(lch) = dest_start; OMAP_DMA_CDEI_REG(lch) = dst_ei; @@ -372,7 +438,7 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, void omap_set_dma_dest_index(int lch, int eidx, int fidx) { - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { REVISIT_24XX(); return; } @@ -396,19 +462,19 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) case OMAP_DMA_DATA_BURST_DIS: break; case OMAP_DMA_DATA_BURST_4: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x1; else burst = 0x2; break; case OMAP_DMA_DATA_BURST_8: - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) burst = 0x2; else burst = 0x3; break; case OMAP_DMA_DATA_BURST_16: - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { burst = 0x3; break; } @@ -430,7 +496,7 @@ static inline void omap_enable_channel_irq(int lch) /* Clear CSR */ if (cpu_class_is_omap1()) status = OMAP_DMA_CSR_REG(lch); - else if (cpu_is_omap24xx()) + else if (cpu_class_is_omap2()) OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK; /* Enable some nice interrupts. */ @@ -441,7 +507,7 @@ static inline void omap_enable_channel_irq(int lch) static void omap_disable_channel_irq(int lch) { - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) OMAP_DMA_CICR_REG(lch) = 0; } @@ -464,6 +530,12 @@ static inline void enable_lnk(int lch) if (dma_chan[lch].next_lch != -1) OMAP_DMA_CLNK_CTRL_REG(lch) = dma_chan[lch].next_lch | (1 << 15); + +#ifndef CONFIG_ARCH_OMAP1 + if (dma_chan[lch].next_linked_ch != -1) + OMAP_DMA_CLNK_CTRL_REG(lch) = + dma_chan[lch].next_linked_ch | (1 << 15); +#endif } static inline void disable_lnk(int lch) @@ -475,7 +547,7 @@ static inline void disable_lnk(int lch) OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { omap_disable_channel_irq(lch); /* Clear the ENABLE_LNK bit */ OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15); @@ -488,7 +560,7 @@ static inline void omap2_enable_irq_lch(int lch) { u32 val; - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) return; val = omap_readl(OMAP_DMA4_IRQENABLE_L0); @@ -522,7 +594,7 @@ int omap_request_dma(int dev_id, const char *dev_name, if (cpu_class_is_omap1()) clear_lch_regs(free_ch); - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) omap_clear_dma(free_ch); spin_unlock_irqrestore(&dma_chan_lock, flags); @@ -530,11 +602,14 @@ int omap_request_dma(int dev_id, const char *dev_name, chan->dev_name = dev_name; chan->callback = callback; chan->data = data; +#ifndef CONFIG_ARCH_OMAP1 + chan->chain_id = -1; +#endif chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; if (cpu_class_is_omap1()) chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; - else if (cpu_is_omap24xx()) + else if (cpu_class_is_omap2()) chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | OMAP2_DMA_TRANS_ERR_IRQ; @@ -551,7 +626,7 @@ int omap_request_dma(int dev_id, const char *dev_name, OMAP_DMA_CCR_REG(free_ch) = dev_id; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { omap2_enable_irq_lch(free_ch); omap_enable_channel_irq(free_ch); @@ -588,7 +663,7 @@ void omap_free_dma(int lch) OMAP_DMA_CCR_REG(lch) = 0; } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { u32 val; /* Disable interrupts */ val = omap_readl(OMAP_DMA4_IRQENABLE_L0); @@ -608,6 +683,67 @@ void omap_free_dma(int lch) } } +/** + * @brief omap_dma_set_global_params : Set global priority settings for dma + * + * @param arb_rate + * @param max_fifo_depth + * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM + * DMA_THREAD_RESERVE_ONET + * DMA_THREAD_RESERVE_TWOT + * DMA_THREAD_RESERVE_THREET + */ +void +omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) +{ + u32 reg; + + if (!cpu_class_is_omap2()) { + printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__); + return; + } + + if (arb_rate == 0) + arb_rate = 1; + + reg = (arb_rate & 0xff) << 16; + reg |= (0xff & max_fifo_depth); + + omap_writel(reg, OMAP_DMA4_GCR_REG); +} +EXPORT_SYMBOL(omap_dma_set_global_params); + +/** + * @brief omap_dma_set_prio_lch : Set channel wise priority settings + * + * @param lch + * @param read_prio - Read priority + * @param write_prio - Write priority + * Both of the above can be set with one of the following values : + * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW + */ +int +omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio) +{ + u32 w; + + if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid channel id\n"); + return -EINVAL; + } + w = OMAP_DMA_CCR_REG(lch); + w &= ~((1 << 6) | (1 << 26)); + if (cpu_is_omap2430() || cpu_is_omap34xx()) + w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); + else + w |= ((read_prio & 0x1) << 6); + + OMAP_DMA_CCR_REG(lch) = w; + return 0; +} +EXPORT_SYMBOL(omap_dma_set_prio_lch); + /* * Clears any DMA state so the DMA engine is ready to restart with new buffers * through omap_start_dma(). Any buffers in flight are discarded. @@ -626,9 +762,9 @@ void omap_clear_dma(int lch) status = OMAP_DMA_CSR_REG(lch); } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { int i; - u32 lch_base = OMAP24XX_DMA_BASE + lch * 0x60 + 0x80; + u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80; for (i = 0; i < 0x44; i += 4) omap_writel(0, lch_base + i); } @@ -662,7 +798,7 @@ void omap_start_dma(int lch) cur_lch = next_lch; } while (next_lch != -1); - } else if (cpu_is_omap24xx()) { + } else if (cpu_class_is_omap2()) { /* Errata: Need to write lch even if not using chaining */ OMAP_DMA_CLNK_CTRL_REG(lch) = lch; } @@ -753,7 +889,7 @@ dma_addr_t omap_get_dma_src_pos(int lch) offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) | (OMAP1_DMA_CSSA_U_REG(lch) << 16)); - if (cpu_is_omap24xx()) + if (cpu_class_is_omap2()) offset = OMAP_DMA_CSAC_REG(lch); return offset; @@ -775,8 +911,8 @@ dma_addr_t omap_get_dma_dst_pos(int lch) offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) | (OMAP1_DMA_CDSA_U_REG(lch) << 16)); - if (cpu_is_omap24xx()) - offset = OMAP2_DMA_CDSA_REG(lch); + if (cpu_class_is_omap2()) + offset = OMAP_DMA_CDAC_REG(lch); return offset; } @@ -859,6 +995,605 @@ void omap_dma_unlink_lch (int lch_head, int lch_queue) dma_chan[lch_head].next_lch = -1; } +#ifndef CONFIG_ARCH_OMAP1 +/* Create chain of DMA channesls */ +static void create_dma_lch_chain(int lch_head, int lch_queue) +{ + u32 w; + + /* Check if this is the first link in chain */ + if (dma_chan[lch_head].next_linked_ch == -1) { + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[lch_head].prev_linked_ch = lch_queue; + dma_chan[lch_queue].next_linked_ch = lch_head; + dma_chan[lch_queue].prev_linked_ch = lch_head; + } + + /* a link exists, link the new channel in circular chain */ + else { + dma_chan[lch_queue].next_linked_ch = + dma_chan[lch_head].next_linked_ch; + dma_chan[lch_queue].prev_linked_ch = lch_head; + dma_chan[lch_head].next_linked_ch = lch_queue; + dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = + lch_queue; + } + + w = OMAP_DMA_CLNK_CTRL_REG(lch_head); + w &= ~(0x0f); + w |= lch_queue; + OMAP_DMA_CLNK_CTRL_REG(lch_head) = w; + + w = OMAP_DMA_CLNK_CTRL_REG(lch_queue); + w &= ~(0x0f); + w |= (dma_chan[lch_queue].next_linked_ch); + OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w; +} + +/** + * @brief omap_request_dma_chain : Request a chain of DMA channels + * + * @param dev_id - Device id using the dma channel + * @param dev_name - Device name + * @param callback - Call back function + * @chain_id - + * @no_of_chans - Number of channels requested + * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN + * OMAP_DMA_DYNAMIC_CHAIN + * @params - Channel parameters + * + * @return - Succes : 0 + * Failure: -EINVAL/-ENOMEM + */ +int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int chain_id, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, int chain_mode, + struct omap_dma_channel_params params) +{ + int *channels; + int i, err; + + /* Is the chain mode valid ? */ + if (chain_mode != OMAP_DMA_STATIC_CHAIN + && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { + printk(KERN_ERR "Invalid chain mode requested\n"); + return -EINVAL; + } + + if (unlikely((no_of_chans < 1 + || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid Number of channels requested\n"); + return -EINVAL; + } + + /* Allocate a queue to maintain the status of the channels + * in the chain */ + channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); + if (channels == NULL) { + printk(KERN_ERR "omap_dma: No memory for channel queue\n"); + return -ENOMEM; + } + + /* request and reserve DMA channels for the chain */ + for (i = 0; i < no_of_chans; i++) { + err = omap_request_dma(dev_id, dev_name, + callback, 0, &channels[i]); + if (err < 0) { + int j; + for (j = 0; j < i; j++) + omap_free_dma(channels[j]); + kfree(channels); + printk(KERN_ERR "omap_dma: Request failed %d\n", err); + return err; + } + dma_chan[channels[i]].next_linked_ch = -1; + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + + *chain_id = channels[0]; + dma_linked_lch[*chain_id].linked_dmach_q = channels; + dma_linked_lch[*chain_id].chain_mode = chain_mode; + dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; + + for (i = 0; i < no_of_chans; i++) + dma_chan[channels[i]].chain_id = *chain_id; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(*chain_id); + + /* Set up the chain */ + if (no_of_chans == 1) + create_dma_lch_chain(channels[0], channels[0]); + else { + for (i = 0; i < (no_of_chans - 1); i++) + create_dma_lch_chain(channels[i], channels[i + 1]); + } + return 0; +} +EXPORT_SYMBOL(omap_request_dma_chain); + +/** + * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the + * params after setting it. Dont do this while dma is running!! + * + * @param chain_id - Chained logical channel id. + * @param params + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params) +{ + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + /* + * Allowing client drivers to set common parameters now, + * so that later only relevant (src_start, dest_start + * and element count) can be set + */ + omap_set_dma_params(channels[i], ¶ms); + } + return 0; +} +EXPORT_SYMBOL(omap_modify_dma_chain_params); + +/** + * @brief omap_free_dma_chain - Free all the logical channels in a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_free_dma_chain(int chain_id) +{ + int *channels; + u32 i; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + dma_chan[channels[i]].next_linked_ch = -1; + dma_chan[channels[i]].prev_linked_ch = -1; + dma_chan[channels[i]].chain_id = -1; + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + omap_free_dma(channels[i]); + } + + kfree(channels); + + dma_linked_lch[chain_id].linked_dmach_q = NULL; + dma_linked_lch[chain_id].chain_mode = -1; + dma_linked_lch[chain_id].chain_state = -1; + return (0); +} +EXPORT_SYMBOL(omap_free_dma_chain); + +/** + * @brief omap_dma_chain_status - Check if the chain is in + * active / inactive state. + * @param chain_id + * + * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE + * Failure : -EINVAL + */ +int omap_dma_chain_status(int chain_id) +{ + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, + dma_linked_lch[chain_id].q_count); + + if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) + return OMAP_DMA_CHAIN_INACTIVE; + return OMAP_DMA_CHAIN_ACTIVE; +} +EXPORT_SYMBOL(omap_dma_chain_status); + +/** + * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, + * set the params and start the transfer. + * + * @param chain_id + * @param src_start - buffer start address + * @param dest_start - Dest address + * @param elem_count + * @param frame_count + * @param callbk_data - channel callback parameter data. + * + * @return - Success : start_dma status + * Failure: -EINVAL/-EBUSY + */ +int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, + int elem_count, int frame_count, void *callbk_data) +{ + int *channels; + u32 w, lch; + int start_dma = 0; + + /* if buffer size is less than 1 then there is + * no use of starting the chain */ + if (elem_count < 1) { + printk(KERN_ERR "Invalid buffer size\n"); + return -EINVAL; + } + + /* Check for input params */ + if (unlikely((chain_id < 0 + || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exist\n"); + return -EINVAL; + } + + /* Check if all the channels in chain are in use */ + if (OMAP_DMA_CHAIN_QFULL(chain_id)) + return -EBUSY; + + /* Frame count may be negative in case of indexed transfers */ + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get a free channel */ + lch = channels[dma_linked_lch[chain_id].q_tail]; + + /* Store the callback data */ + dma_chan[lch].data = callbk_data; + + /* Increment the q_tail */ + OMAP_DMA_CHAIN_INCQTAIL(chain_id); + + /* Set the params to the free channel */ + if (src_start != 0) + OMAP2_DMA_CSSA_REG(lch) = src_start; + if (dest_start != 0) + OMAP2_DMA_CDSA_REG(lch) = dest_start; + + /* Write the buffer size */ + OMAP_DMA_CEN_REG(lch) = elem_count; + OMAP_DMA_CFN_REG(lch) = frame_count; + + /* If the chain is dynamically linked, + * then we may have to start the chain if its not active */ + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { + + /* In Dynamic chain, if the chain is not started, + * queue the channel */ + if (dma_linked_lch[chain_id].chain_state == + DMA_CHAIN_NOTSTARTED) { + /* Enable the link in previous channel */ + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_QUEUED) + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + } + + /* Chain is already started, make sure its active, + * if not then start the chain */ + else { + start_dma = 1; + + if (dma_chan[dma_chan[lch].prev_linked_ch].state == + DMA_CH_STARTED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG + (dma_chan[lch].prev_linked_ch)))) { + disable_lnk(dma_chan[lch]. + prev_linked_ch); + pr_debug("\n prev ch is stopped\n"); + start_dma = 1; + } + } + + else if (dma_chan[dma_chan[lch].prev_linked_ch].state + == DMA_CH_QUEUED) { + enable_lnk(dma_chan[lch].prev_linked_ch); + dma_chan[lch].state = DMA_CH_QUEUED; + start_dma = 0; + } + omap_enable_channel_irq(lch); + + w = OMAP_DMA_CCR_REG(lch); + + if ((0 == (w & (1 << 24)))) + w &= ~(1 << 25); + else + w |= (1 << 25); + if (start_dma == 1) { + if (0 == (w & (1 << 7))) { + w |= (1 << 7); + dma_chan[lch].state = DMA_CH_STARTED; + pr_debug("starting %d\n", lch); + OMAP_DMA_CCR_REG(lch) = w; + } else + start_dma = 0; + } else { + if (0 == (w & (1 << 7))) + OMAP_DMA_CCR_REG(lch) = w; + } + dma_chan[lch].flags |= OMAP_DMA_ACTIVE; + } + } + return start_dma; +} +EXPORT_SYMBOL(omap_dma_chain_a_transfer); + +/** + * @brief omap_start_dma_chain_transfers - Start the chain + * + * @param chain_id + * + * @return - Success : 0 + * Failure : -EINVAL/-EBUSY + */ +int omap_start_dma_chain_transfers(int chain_id) +{ + int *channels; + u32 w, i; + + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { + printk(KERN_ERR "Chain is already started\n"); + return -EBUSY; + } + + if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; + i++) { + enable_lnk(channels[i]); + omap_enable_channel_irq(channels[i]); + } + } else { + omap_enable_channel_irq(channels[0]); + } + + w = OMAP_DMA_CCR_REG(channels[0]); + w |= (1 << 7); + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; + dma_chan[channels[0]].state = DMA_CH_STARTED; + + if ((0 == (w & (1 << 24)))) + w &= ~(1 << 25); + else + w |= (1 << 25); + OMAP_DMA_CCR_REG(channels[0]) = w; + + dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; + return 0; +} +EXPORT_SYMBOL(omap_start_dma_chain_transfers); + +/** + * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. + * + * @param chain_id + * + * @return - Success : 0 + * Failure : EINVAL + */ +int omap_stop_dma_chain_transfers(int chain_id) +{ + int *channels; + u32 w, i; + u32 sys_cf; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* DMA Errata: + * Special programming model needed to disable DMA before end of block + */ + sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG); + w = sys_cf; + /* Middle mode reg set no Standby */ + w &= ~((1 << 12)|(1 << 13)); + omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG); + + for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { + + /* Stop the Channel transmission */ + w = OMAP_DMA_CCR_REG(channels[i]); + w &= ~(1 << 7); + OMAP_DMA_CCR_REG(channels[i]) = w; + + /* Disable the link in all the channels */ + disable_lnk(channels[i]); + dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; + + } + dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; + + /* Reset the Queue pointers */ + OMAP_DMA_CHAIN_QINIT(chain_id); + + /* Errata - put in the old value */ + omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG); + return 0; +} +EXPORT_SYMBOL(omap_stop_dma_chain_transfers); + +/* Get the index of the ongoing DMA in chain */ +/** + * @brief omap_get_dma_chain_index - Get the element and frame index + * of the ongoing DMA in chain + * + * @param chain_id + * @param ei - Element index + * @param fi - Frame index + * + * @return - Success : 0 + * Failure : -EINVAL + */ +int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + if ((!ei) || (!fi)) + return -EINVAL; + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + *ei = OMAP2_DMA_CCEN_REG(lch); + *fi = OMAP2_DMA_CCFN_REG(lch); + + return 0; +} +EXPORT_SYMBOL(omap_get_dma_chain_index); + +/** + * @brief omap_get_dma_chain_dst_pos - Get the destination position of the + * ongoing DMA in chain + * + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_dst_pos(int chain_id) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + return (OMAP_DMA_CDAC_REG(lch)); +} +EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); + +/** + * @brief omap_get_dma_chain_src_pos - Get the source position + * of the ongoing DMA in chain + * @param chain_id + * + * @return - Success : Destination position + * Failure : -EINVAL + */ +int omap_get_dma_chain_src_pos(int chain_id) +{ + int lch; + int *channels; + + /* Check for input params */ + if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) { + printk(KERN_ERR "Invalid chain id\n"); + return -EINVAL; + } + + /* Check if the chain exists */ + if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { + printk(KERN_ERR "Chain doesn't exists\n"); + return -EINVAL; + } + + channels = dma_linked_lch[chain_id].linked_dmach_q; + + /* Get the current channel */ + lch = channels[dma_linked_lch[chain_id].q_head]; + + return (OMAP_DMA_CSAC_REG(lch)); +} +EXPORT_SYMBOL(omap_get_dma_chain_src_pos); +#endif + /*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP1 @@ -919,7 +1654,7 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) #define omap1_dma_irq_handler NULL #endif -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) static int omap2_dma_handle_ch(int ch) { @@ -953,8 +1688,33 @@ static int omap2_dma_handle_ch(int ch) OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK; omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0); - if (likely(dma_chan[ch].callback != NULL)) - dma_chan[ch].callback(ch, status, dma_chan[ch].data); + /* If the ch is not chained then chain_id will be -1 */ + if (dma_chan[ch].chain_id != -1) { + int chain_id = dma_chan[ch].chain_id; + dma_chan[ch].state = DMA_CH_NOTSTARTED; + if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15)) + dma_chan[dma_chan[ch].next_linked_ch].state = + DMA_CH_STARTED; + if (dma_linked_lch[chain_id].chain_mode == + OMAP_DMA_DYNAMIC_CHAIN) + disable_lnk(ch); + + if (!OMAP_DMA_CHAIN_QEMPTY(chain_id)) + OMAP_DMA_CHAIN_INCQHEAD(chain_id); + + status = OMAP_DMA_CSR_REG(ch); + } + + if (likely(dma_chan[ch].callback != NULL)) { + if (dma_chan[ch].chain_id != -1) + dma_chan[ch].callback(dma_chan[ch].chain_id, status, + dma_chan[ch].data); + else + dma_chan[ch].callback(ch, status, dma_chan[ch].data); + + } + + OMAP_DMA_CSR_REG(ch) = status; return 0; } @@ -1385,7 +2145,7 @@ static int __init omap_init_dma(void) w &= ~(1 << 8); omap_writew(w, OMAP1610_DMA_LCD_CTRL); } - } else if (cpu_is_omap24xx()) { + } else if (cpu_class_is_omap2()) { u8 revision = omap_readb(OMAP_DMA4_REVISION); printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", revision >> 4, revision & 0xf); @@ -1428,7 +2188,11 @@ static int __init omap_init_dma(void) } } - if (cpu_is_omap24xx()) + if (cpu_is_omap2430() || cpu_is_omap34xx()) + omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, + DMA_DEFAULT_FIFO_DEPTH, 0); + + if (cpu_class_is_omap2()) setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq); /* FIXME: Update LCD DMA to work on 24xx */ diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 3856f5aedfc1..e719d0eeb5c8 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -48,7 +48,7 @@ #define OMAP_TIMER_COUNTER_REG 0x28 #define OMAP_TIMER_LOAD_REG 0x2c #define OMAP_TIMER_TRIGGER_REG 0x30 -#define OMAP_TIMER_WRITE_PEND_REG 0x34 +#define OMAP_TIMER_WRITE_PEND_REG 0x34 #define OMAP_TIMER_MATCH_REG 0x38 #define OMAP_TIMER_CAPTURE_REG 0x3c #define OMAP_TIMER_IF_CTRL_REG 0x40 @@ -70,7 +70,7 @@ struct omap_dm_timer { unsigned long phys_base; int irq; -#ifdef CONFIG_ARCH_OMAP2 +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) struct clk *iclk, *fclk; #endif void __iomem *io_base; @@ -82,8 +82,14 @@ struct omap_dm_timer { #define omap_dm_clk_enable(x) #define omap_dm_clk_disable(x) +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL -static struct omap_dm_timer dm_timers[] = { +static struct omap_dm_timer omap1_dm_timers[] = { { .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 }, { .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 }, { .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 }, @@ -94,12 +100,18 @@ static struct omap_dm_timer dm_timers[] = { { .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 }, }; +static const int dm_timer_count = ARRAY_SIZE(omap1_dm_timers); + #elif defined(CONFIG_ARCH_OMAP2) -#define omap_dm_clk_enable(x) clk_enable(x) -#define omap_dm_clk_disable(x) clk_disable(x) +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL +#define omap3_dm_timers NULL +#define omap3_dm_source_names NULL +#define omap3_dm_source_clocks NULL -static struct omap_dm_timer dm_timers[] = { +static struct omap_dm_timer omap2_dm_timers[] = { { .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 }, { .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 }, { .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 }, @@ -114,13 +126,48 @@ static struct omap_dm_timer dm_timers[] = { { .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 }, }; -static const char *dm_source_names[] = { +static const char *omap2_dm_source_names[] __initdata = { "sys_ck", "func_32k_ck", - "alt_ck" + "alt_ck", + NULL }; -static struct clk *dm_source_clocks[3]; +static struct clk **omap2_dm_source_clocks[3]; +static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers); + +#elif defined(CONFIG_ARCH_OMAP3) + +#define omap_dm_clk_enable(x) clk_enable(x) +#define omap_dm_clk_disable(x) clk_disable(x) +#define omap1_dm_timers NULL +#define omap2_dm_timers NULL +#define omap2_dm_source_names NULL +#define omap2_dm_source_clocks NULL + +static struct omap_dm_timer omap3_dm_timers[] = { + { .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 }, + { .phys_base = 0x49032000, .irq = INT_24XX_GPTIMER2 }, + { .phys_base = 0x49034000, .irq = INT_24XX_GPTIMER3 }, + { .phys_base = 0x49036000, .irq = INT_24XX_GPTIMER4 }, + { .phys_base = 0x49038000, .irq = INT_24XX_GPTIMER5 }, + { .phys_base = 0x4903A000, .irq = INT_24XX_GPTIMER6 }, + { .phys_base = 0x4903C000, .irq = INT_24XX_GPTIMER7 }, + { .phys_base = 0x4903E000, .irq = INT_24XX_GPTIMER8 }, + { .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 }, + { .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 }, + { .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 }, + { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 }, +}; + +static const char *omap3_dm_source_names[] __initdata = { + "sys_ck", + "omap_32k_fck", + NULL +}; + +static struct clk **omap3_dm_source_clocks[2]; +static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers); #else @@ -128,7 +175,10 @@ static struct clk *dm_source_clocks[3]; #endif -static const int dm_timer_count = ARRAY_SIZE(dm_timers); +static struct omap_dm_timer *dm_timers; +static char **dm_source_names; +static struct clk **dm_source_clocks; + static spinlock_t dm_timer_lock; static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg) @@ -299,7 +349,7 @@ __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask) return inputmask; } -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3) struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer) { @@ -486,36 +536,46 @@ int omap_dm_timers_active(void) return 0; } -int omap_dm_timer_init(void) +int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; int i; - if (!(cpu_is_omap16xx() || cpu_is_omap24xx())) + if (!(cpu_is_omap16xx() || cpu_class_is_omap2())) return -ENODEV; spin_lock_init(&dm_timer_lock); -#ifdef CONFIG_ARCH_OMAP2 - for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) { - dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]); - BUG_ON(dm_source_clocks[i] == NULL); + + if (cpu_class_is_omap1()) + dm_timers = omap1_dm_timers; + else if (cpu_is_omap24xx()) { + dm_timers = omap2_dm_timers; + dm_source_names = (char **)omap2_dm_source_names; + dm_source_clocks = (struct clk **)omap2_dm_source_clocks; + } else if (cpu_is_omap34xx()) { + dm_timers = omap3_dm_timers; + dm_source_names = (char **)omap3_dm_source_names; + dm_source_clocks = (struct clk **)omap3_dm_source_clocks; } -#endif + + if (cpu_class_is_omap2()) + for (i = 0; dm_source_names[i] != NULL; i++) + dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]); + if (cpu_is_omap243x()) dm_timers[0].phys_base = 0x49018000; for (i = 0; i < dm_timer_count; i++) { -#ifdef CONFIG_ARCH_OMAP2 - char clk_name[16]; -#endif - timer = &dm_timers[i]; - timer->io_base = (void __iomem *) io_p2v(timer->phys_base); -#ifdef CONFIG_ARCH_OMAP2 - sprintf(clk_name, "gpt%d_ick", i + 1); - timer->iclk = clk_get(NULL, clk_name); - sprintf(clk_name, "gpt%d_fck", i + 1); - timer->fclk = clk_get(NULL, clk_name); + timer->io_base = (void __iomem *)io_p2v(timer->phys_base); +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (cpu_class_is_omap2()) { + char clk_name[16]; + sprintf(clk_name, "gpt%d_ick", i + 1); + timer->iclk = clk_get(NULL, clk_name); + sprintf(clk_name, "gpt%d_fck", i + 1); + timer->fclk = clk_get(NULL, clk_name); + } #endif } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index b2a87b8ef673..56f4d1394d56 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -110,6 +110,8 @@ #define OMAP24XX_GPIO_LEVELDETECT1 0x0044 #define OMAP24XX_GPIO_RISINGDETECT 0x0048 #define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 #define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 #define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 #define OMAP24XX_GPIO_CLEARWKUENA 0x0080 @@ -117,17 +119,29 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 +/* + * omap34xx specific GPIO registers + */ + +#define OMAP34XX_GPIO1_BASE (void __iomem *)0x48310000 +#define OMAP34XX_GPIO2_BASE (void __iomem *)0x49050000 +#define OMAP34XX_GPIO3_BASE (void __iomem *)0x49052000 +#define OMAP34XX_GPIO4_BASE (void __iomem *)0x49054000 +#define OMAP34XX_GPIO5_BASE (void __iomem *)0x49056000 +#define OMAP34XX_GPIO6_BASE (void __iomem *)0x49058000 + + struct gpio_bank { void __iomem *base; u16 irq; u16 virtual_irq_start; int method; u32 reserved_map; -#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 suspend_wakeup; u32 saved_wakeup; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) u32 non_wakeup_gpios; u32 enabled_non_wakeup_gpios; @@ -192,48 +206,52 @@ static struct gpio_bank gpio_bank_243x[5] = { #endif +#ifdef CONFIG_ARCH_OMAP34XX +static struct gpio_bank gpio_bank_34xx[6] = { + { OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX }, + { OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX }, +}; + +#endif + static struct gpio_bank *gpio_bank; static int gpio_bank_count; static inline struct gpio_bank *get_gpio_bank(int gpio) { -#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1]; } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 4)]; } -#endif -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) { if (OMAP_GPIO_IS_MPUIO(gpio)) return &gpio_bank[0]; return &gpio_bank[1 + (gpio >> 5)]; } -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx()) return &gpio_bank[gpio >> 5]; -#endif + if (cpu_is_omap34xx()) + return &gpio_bank[gpio >> 5]; } static inline int get_gpio_index(int gpio) { -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730()) return gpio & 0x1f; -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx()) return gpio & 0x1f; -#endif + if (cpu_is_omap34xx()) + return gpio & 0x1f; return gpio & 0x0f; } @@ -241,29 +259,21 @@ static inline int gpio_valid(int gpio) { if (gpio < 0) return -1; -#ifndef CONFIG_ARCH_OMAP24XX - if (OMAP_GPIO_IS_MPUIO(gpio)) { + if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { if (gpio >= OMAP_MAX_GPIO_LINES + 16) return -1; return 0; } -#endif -#ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx() && gpio < 16) return 0; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) if ((cpu_is_omap16xx()) && gpio < 64) return 0; -#endif -#ifdef CONFIG_ARCH_OMAP730 if (cpu_is_omap730() && gpio < 192) return 0; -#endif -#ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap24xx() && gpio < 128) return 0; -#endif + if (cpu_is_omap34xx() && gpio < 160) + return 0; return -1; } @@ -303,7 +313,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP730_GPIO_DIR_CONTROL; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; @@ -377,7 +387,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -435,7 +445,7 @@ int omap_get_gpio_datain(int gpio) reg += OMAP730_GPIO_DATA_INPUT; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; @@ -455,8 +465,50 @@ do { \ __raw_writel(l, base + reg); \ } while(0) -#ifdef CONFIG_ARCH_OMAP24XX -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +void omap_set_gpio_debounce(int gpio, int enable) +{ + struct gpio_bank *bank; + void __iomem *reg; + u32 val, l = 1 << get_gpio_index(gpio); + + if (cpu_class_is_omap1()) + return; + + bank = get_gpio_bank(gpio); + reg = bank->base; + + reg += OMAP24XX_GPIO_DEBOUNCE_EN; + val = __raw_readl(reg); + + if (enable) + val |= l; + else + val &= ~l; + + __raw_writel(val, reg); +} +EXPORT_SYMBOL(omap_set_gpio_debounce); + +void omap_set_gpio_debounce_time(int gpio, int enc_time) +{ + struct gpio_bank *bank; + void __iomem *reg; + + if (cpu_class_is_omap1()) + return; + + bank = get_gpio_bank(gpio); + reg = bank->base; + + enc_time &= 0xff; + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + __raw_writel(enc_time, reg); +} +EXPORT_SYMBOL(omap_set_gpio_debounce_time); + +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + int trigger) { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; @@ -469,19 +521,25 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, in trigger & __IRQT_RISEDGE); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, trigger & __IRQT_FALEDGE); + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) - __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_SETWKUENA); else - __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_CLEARWKUENA); } else { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; else bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - /* FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only level - * triggering requested. */ + + /* + * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only + * level triggering requested. + */ } #endif @@ -547,7 +605,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) goto bad; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: set_24xx_gpio_triggering(bank, gpio, trigger); break; @@ -567,7 +625,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) unsigned gpio; int retval; - if (!cpu_is_omap24xx() && irq > IH_MPUIO_BASE) + if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE) gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE); else gpio = irq - IH_GPIO_BASE; @@ -579,7 +637,7 @@ static int gpio_irq_type(unsigned irq, unsigned type) return -EINVAL; /* OMAP1 allows only only edge triggering */ - if (!cpu_is_omap24xx() + if (!cpu_class_is_omap2() && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; @@ -620,7 +678,7 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP730_GPIO_INT_STATUS; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; @@ -632,8 +690,10 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) __raw_writel(gpio_mask, reg); /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap2420()) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + if (cpu_is_omap24xx() || cpu_is_omap34xx()) __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2); +#endif } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -676,7 +736,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; @@ -739,7 +799,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -785,7 +845,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) spin_unlock(&bank->lock); return 0; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (bank->non_wakeup_gpios & (1 << gpio)) { printk(KERN_ERR "Unable to modify wakeup on " @@ -891,7 +951,7 @@ void omap_free_gpio(int gpio) __raw_writel(1 << get_gpio_index(gpio), reg); } #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { /* Disable wake-up during idle for dynamic tick */ void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -940,7 +1000,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_730) isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif @@ -954,7 +1014,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) isr &= 0x0000ffff; - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { level_mask = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | @@ -1023,7 +1083,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) } } - if (cpu_is_omap24xx()) { + if (cpu_class_is_omap2()) { /* clear level sensitive interrupts after handler(s) */ _enable_gpio_irqbank(bank, isr_saved & level_mask, 0); _clear_gpio_irqbank(bank, isr_saved & level_mask); @@ -1199,21 +1259,35 @@ static inline void mpuio_init(void) {} /*---------------------------------------------------------------------*/ static int initialized; +#if !defined(CONFIG_ARCH_OMAP3) static struct clk * gpio_ick; -static struct clk * gpio_fck; +#endif -#ifdef CONFIG_ARCH_OMAP2430 +#if defined(CONFIG_ARCH_OMAP2) +static struct clk * gpio_fck; +#endif + +#if defined(CONFIG_ARCH_OMAP2430) static struct clk * gpio5_ick; static struct clk * gpio5_fck; #endif +#if defined(CONFIG_ARCH_OMAP3) +static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS]; +static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS]; +#endif + static int __init _omap_gpio_init(void) { int i; struct gpio_bank *bank; +#if defined(CONFIG_ARCH_OMAP3) + char clk_name[11]; +#endif initialized = 1; +#if defined(CONFIG_ARCH_OMAP1) if (cpu_is_omap15xx()) { gpio_ick = clk_get(NULL, "arm_gpio_ck"); if (IS_ERR(gpio_ick)) @@ -1221,7 +1295,9 @@ static int __init _omap_gpio_init(void) else clk_enable(gpio_ick); } - if (cpu_is_omap24xx()) { +#endif +#if defined(CONFIG_ARCH_OMAP2) + if (cpu_class_is_omap2()) { gpio_ick = clk_get(NULL, "gpios_ick"); if (IS_ERR(gpio_ick)) printk("Could not get gpios_ick\n"); @@ -1234,9 +1310,9 @@ static int __init _omap_gpio_init(void) clk_enable(gpio_fck); /* - * On 2430 GPIO 5 uses CORE L4 ICLK + * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK */ -#ifdef CONFIG_ARCH_OMAP2430 +#if defined(CONFIG_ARCH_OMAP2430) if (cpu_is_omap2430()) { gpio5_ick = clk_get(NULL, "gpio5_ick"); if (IS_ERR(gpio5_ick)) @@ -1250,7 +1326,28 @@ static int __init _omap_gpio_init(void) clk_enable(gpio5_fck); } #endif -} + } +#endif + +#if defined(CONFIG_ARCH_OMAP3) + if (cpu_is_omap34xx()) { + for (i = 0; i < OMAP34XX_NR_GPIOS; i++) { + sprintf(clk_name, "gpio%d_ick", i + 1); + gpio_iclks[i] = clk_get(NULL, clk_name); + if (IS_ERR(gpio_iclks[i])) + printk(KERN_ERR "Could not get %s\n", clk_name); + else + clk_enable(gpio_iclks[i]); + sprintf(clk_name, "gpio%d_fck", i + 1); + gpio_fclks[i] = clk_get(NULL, clk_name); + if (IS_ERR(gpio_fclks[i])) + printk(KERN_ERR "Could not get %s\n", clk_name); + else + clk_enable(gpio_fclks[i]); + } + } +#endif + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { @@ -1297,6 +1394,17 @@ static int __init _omap_gpio_init(void) printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } +#endif +#ifdef CONFIG_ARCH_OMAP34XX + if (cpu_is_omap34xx()) { + int rev; + + gpio_bank_count = OMAP34XX_NR_GPIOS; + gpio_bank = gpio_bank_34xx; + rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); + } #endif for (i = 0; i < gpio_bank_count; i++) { int j, gpio_count = 16; @@ -1307,28 +1415,23 @@ static int __init _omap_gpio_init(void) spin_lock_init(&bank->lock); if (bank_is_mpuio(bank)) omap_writew(0xFFFF, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_MASKIT); -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { __raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK); __raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS); } -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) { + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { __raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1); __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } -#endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) { + if (cpu_is_omap730() && bank->method == METHOD_GPIO_730) { __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); gpio_count = 32; /* 730 has 32-bit GPIOs */ } -#endif -#ifdef CONFIG_ARCH_OMAP24XX + +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) { static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 @@ -1364,21 +1467,21 @@ static int __init _omap_gpio_init(void) if (cpu_is_omap16xx()) omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL); -#ifdef CONFIG_ARCH_OMAP24XX /* Enable autoidle for the OCP interface */ if (cpu_is_omap24xx()) omap_writel(1 << 0, 0x48019010); -#endif + if (cpu_is_omap34xx()) + omap_writel(1 << 0, 0x48306814); return 0; } -#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX) +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) { int i; - if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { @@ -1395,7 +1498,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; @@ -1435,7 +1538,7 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; @@ -1467,7 +1570,7 @@ static struct sys_device omap_gpio_device = { #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) static int workaround_enabled; @@ -1483,15 +1586,19 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif c++; } if (!c) { @@ -1513,26 +1620,31 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, bank->base + OMAP24XX_GPIO_RISINGDETECT); +#endif /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); +#endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; - +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); +#endif } } @@ -1561,8 +1673,8 @@ static int __init omap_gpio_sysinit(void) mpuio_init(); -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { if (ret == 0) { ret = sysdev_class_register(&omap_gpio_sysclass); if (ret == 0) @@ -1624,7 +1736,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_is_omap24xx() || cpu_is_omap730()) + else if (cpu_class_is_omap2() || cpu_is_omap730()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c new file mode 100644 index 000000000000..7990ab185bb1 --- /dev/null +++ b/arch/arm/plat-omap/i2c.c @@ -0,0 +1,148 @@ +/* + * linux/arch/arm/plat-omap/i2c.c + * + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2007 Nokia Corporation. + * + * Contact: Jarkko Nikula + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include + +#define OMAP_I2C_SIZE 0x3f +#define OMAP1_I2C_BASE 0xfffb3800 +#define OMAP2_I2C_BASE1 0x48070000 +#define OMAP2_I2C_BASE2 0x48072000 +#define OMAP2_I2C_BASE3 0x48060000 + +static const char name[] = "i2c_omap"; + +#define I2C_RESOURCE_BUILDER(base, irq) \ + { \ + .start = (base), \ + .end = (base) + OMAP_I2C_SIZE, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = (irq), \ + .flags = IORESOURCE_IRQ, \ + }, + +static struct resource i2c_resources[][2] = { + { I2C_RESOURCE_BUILDER(0, 0) }, +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) }, +#endif +#if defined(CONFIG_ARCH_OMAP34XX) + { I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) }, +#endif +}; + +#define I2C_DEV_BUILDER(bus_id, res, data) \ + { \ + .id = (bus_id), \ + .name = name, \ + .num_resources = ARRAY_SIZE(res), \ + .resource = (res), \ + .dev = { \ + .platform_data = (data), \ + }, \ + } + +static u32 i2c_rate[ARRAY_SIZE(i2c_resources)]; +static struct platform_device omap_i2c_devices[] = { + I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]), +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) + I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]), +#endif +#if defined(CONFIG_ARCH_OMAP34XX) + I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_rate[2]), +#endif +}; + +static void __init omap_i2c_mux_pins(int bus_id) +{ + /* TODO: Muxing for OMAP3 */ + switch (bus_id) { + case 1: + if (cpu_class_is_omap1()) { + omap_cfg_reg(I2C_SCL); + omap_cfg_reg(I2C_SDA); + } else if (cpu_is_omap24xx()) { + omap_cfg_reg(M19_24XX_I2C1_SCL); + omap_cfg_reg(L15_24XX_I2C1_SDA); + } + break; + case 2: + if (cpu_is_omap24xx()) { + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + } + break; + } +} + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + int ports, err; + struct platform_device *pdev; + struct resource *res; + resource_size_t base, irq; + + if (cpu_class_is_omap1()) + ports = 1; + else if (cpu_is_omap24xx()) + ports = 2; + else if (cpu_is_omap34xx()) + ports = 3; + + BUG_ON(bus_id < 1 || bus_id > ports); + + if (info) { + err = i2c_register_board_info(bus_id, info, len); + if (err) + return err; + } + + pdev = &omap_i2c_devices[bus_id - 1]; + *(u32 *)pdev->dev.platform_data = clkrate; + + if (bus_id == 1) { + res = pdev->resource; + if (cpu_class_is_omap1()) { + base = OMAP1_I2C_BASE; + irq = INT_I2C; + } else { + base = OMAP2_I2C_BASE1; + irq = INT_24XX_I2C1_IRQ; + } + res[0].start = base; + res[0].end = base + OMAP_I2C_SIZE; + res[1].start = irq; + } + + omap_i2c_mux_pins(bus_id); + return platform_device_register(pdev); +} diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 2af5bd5a1344..9cf83c4da9fa 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -201,6 +201,14 @@ static int omap_mcbsp_check(unsigned int id) static void omap_mcbsp_dsp_request(void) { if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + int ret; + + ret = omap_dsp_request_mem(); + if (ret < 0) { + printk(KERN_ERR "Could not get dsp memory: %i\n", ret); + return; + } + clk_enable(mcbsp_dsp_ck); clk_enable(mcbsp_api_ck); @@ -219,6 +227,7 @@ static void omap_mcbsp_dsp_request(void) static void omap_mcbsp_dsp_free(void) { if (cpu_is_omap15xx() || cpu_is_omap16xx()) { + omap_dsp_release_mem(); clk_disable(mcbsp_dspxor_ck); clk_disable(mcbsp_dsp_ck); clk_disable(mcbsp_api_ck); @@ -1024,6 +1033,8 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type); EXPORT_SYMBOL(omap_mcbsp_free); EXPORT_SYMBOL(omap_mcbsp_start); EXPORT_SYMBOL(omap_mcbsp_stop); +EXPORT_SYMBOL(omap_mcbsp_pollread); +EXPORT_SYMBOL(omap_mcbsp_pollwrite); EXPORT_SYMBOL(omap_mcbsp_xmit_word); EXPORT_SYMBOL(omap_mcbsp_recv_word); EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); diff --git a/include/asm-arm/arch-omap/board-apollon.h b/include/asm-arm/arch-omap/board-apollon.h index dcb587b311f1..547125a4695e 100644 --- a/include/asm-arm/arch-omap/board-apollon.h +++ b/include/asm-arm/arch-omap/board-apollon.h @@ -29,6 +29,8 @@ #ifndef __ASM_ARCH_OMAP_APOLLON_H #define __ASM_ARCH_OMAP_APOLLON_H +extern void apollon_mmc_init(void); + /* Placeholder for APOLLON specific defines */ #define APOLLON_ETHR_GPIO_IRQ 74 diff --git a/include/asm-arm/arch-omap/board-h2.h b/include/asm-arm/arch-omap/board-h2.h index b2888ef9e9b4..c322796d0d26 100644 --- a/include/asm-arm/arch-omap/board-h2.h +++ b/include/asm-arm/arch-omap/board-h2.h @@ -34,5 +34,8 @@ /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 +extern void h2_mmc_init(void); +extern void h2_mmc_slot_cover_handler(void *arg, int state); + #endif /* __ASM_ARCH_OMAP_H2_H */ diff --git a/include/asm-arm/arch-omap/board-h3.h b/include/asm-arm/arch-omap/board-h3.h index 761ea0a17897..1c2b55c61ca0 100644 --- a/include/asm-arm/arch-omap/board-h3.h +++ b/include/asm-arm/arch-omap/board-h3.h @@ -36,5 +36,7 @@ #define NR_IRQS (MAXIRQNUM + 1) +extern void __init h3_mmc_init(void); +extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/include/asm-arm/arch-omap/board-sx1.h b/include/asm-arm/arch-omap/board-sx1.h index 2bb8dd6e2d14..355adbdaae33 100644 --- a/include/asm-arm/arch-omap/board-sx1.h +++ b/include/asm-arm/arch-omap/board-sx1.h @@ -41,6 +41,12 @@ int sx1_getkeylight(u8 *keylight); int sx1_setmmipower(u8 onoff); int sx1_setusbpower(u8 onoff); -int sx1_setmmcpower(u8 onoff); +int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value); +int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value); + +/* MMC prototypes */ + +extern void sx1_mmc_init(void); +extern void sx1_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */ diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h index 08d58abd8218..442aecbb8f44 100644 --- a/include/asm-arm/arch-omap/common.h +++ b/include/asm-arm/arch-omap/common.h @@ -27,10 +27,21 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H +#ifdef CONFIG_I2C_OMAP +#include +#endif + struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; extern void omap_serial_init(void); +#ifdef CONFIG_I2C_OMAP +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +#define omap_register_i2c_bus(a, b, c, d) 0 +#endif #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/include/asm-arm/arch-omap/cpu.h b/include/asm-arm/arch-omap/cpu.h index ec7eb675d922..e8a4cf52778b 100644 --- a/include/asm-arm/arch-omap/cpu.h +++ b/include/asm-arm/arch-omap/cpu.h @@ -28,7 +28,7 @@ extern unsigned int system_rev; -#define omap2_cpu_rev() ((system_rev >> 8) & 0x0f) +#define omap2_cpu_rev() ((system_rev >> 12) & 0x0f) /* * Test if multicore OMAP support is needed @@ -61,12 +61,33 @@ extern unsigned int system_rev; # define OMAP_NAME omap16xx # endif #endif -#ifdef CONFIG_ARCH_OMAP24XX +#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)) # if (defined(OMAP_NAME) || defined(MULTI_OMAP1)) # error "OMAP1 and OMAP2 can't be selected at the same time" -# else +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2420 +# ifdef OMAP_NAME # undef MULTI_OMAP2 -# define OMAP_NAME omap24xx +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2420 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP2430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap2430 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP3430 +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME omap3430 # endif #endif @@ -79,8 +100,9 @@ extern unsigned int system_rev; * cpu_is_omap24xx(): True for OMAP2420, OMAP2422, OMAP2423, OMAP2430 * cpu_is_omap242x(): True for OMAP2420, OMAP2422, OMAP2423 * cpu_is_omap243x(): True for OMAP2430 + * cpu_is_omap343x(): True for OMAP3430 */ -#define GET_OMAP_CLASS (system_rev & 0xff) +#define GET_OMAP_CLASS ((system_rev >> 24) & 0xff) #define IS_OMAP_CLASS(class, id) \ static inline int is_omap ##class (void) \ @@ -100,9 +122,11 @@ IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) +IS_OMAP_CLASS(34xx, 0x34) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) +IS_OMAP_SUBCLASS(343x, 0x343) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -110,6 +134,8 @@ IS_OMAP_SUBCLASS(243x, 0x243) #define cpu_is_omap24xx() 0 #define cpu_is_omap242x() 0 #define cpu_is_omap243x() 0 +#define cpu_is_omap34xx() 0 +#define cpu_is_omap343x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -137,14 +163,44 @@ IS_OMAP_SUBCLASS(243x, 0x243) # undef cpu_is_omap16xx # define cpu_is_omap16xx() 1 # endif +#endif + +#if defined(MULTI_OMAP2) # if defined(CONFIG_ARCH_OMAP24XX) # undef cpu_is_omap24xx # undef cpu_is_omap242x # undef cpu_is_omap243x -# define cpu_is_omap24xx() 1 +# define cpu_is_omap24xx() is_omap24xx() # define cpu_is_omap242x() is_omap242x() # define cpu_is_omap243x() is_omap243x() # endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# undef cpu_is_omap343x +# define cpu_is_omap34xx() is_omap34xx() +# define cpu_is_omap343x() is_omap343x() +# endif +#else +# if defined(CONFIG_ARCH_OMAP24XX) +# undef cpu_is_omap24xx +# define cpu_is_omap24xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2420) +# undef cpu_is_omap242x +# define cpu_is_omap242x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP2430) +# undef cpu_is_omap243x +# define cpu_is_omap243x() 1 +# endif +# if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap34xx +# define cpu_is_omap34xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP3430) +# undef cpu_is_omap343x +# define cpu_is_omap343x() 1 +# endif #endif /* @@ -162,6 +218,7 @@ IS_OMAP_SUBCLASS(243x, 0x243) * cpu_is_omap2422(): True for OMAP2422 * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 + * cpu_is_omap3430(): True for OMAP3430 */ #define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff) @@ -183,6 +240,7 @@ IS_OMAP_TYPE(2420, 0x2420) IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) +IS_OMAP_TYPE(3430, 0x3430) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -196,6 +254,7 @@ IS_OMAP_TYPE(2430, 0x2430) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 +#define cpu_is_omap3430() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -244,9 +303,65 @@ IS_OMAP_TYPE(2430, 0x2430) # define cpu_is_omap2430() is_omap2430() #endif +#if defined(CONFIG_ARCH_OMAP34XX) +# undef cpu_is_omap3430 +# define cpu_is_omap3430() is_omap3430() +#endif + /* Macros to detect if we have OMAP1 or OMAP2 */ #define cpu_class_is_omap1() (cpu_is_omap730() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) -#define cpu_class_is_omap2() cpu_is_omap24xx() +#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx()) + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +/* + * Macros to detect silicon revision of OMAP2/3 processors. + * is_sil_rev_greater_than: true if passed cpu type & its rev is greater. + * is_sil_rev_lesser_than: true if passed cpu type & its rev is lesser. + * is_sil_rev_equal_to: true if passed cpu type & its rev is equal. + * get_sil_rev: return the silicon rev value. + */ +#define get_sil_omap_type(rev) ((rev & 0xffff0000) >> 16) +#define get_sil_revision(rev) ((rev & 0x0000f000) >> 12) + +#define is_sil_rev_greater_than(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) > get_sil_revision(rev))) + +#define is_sil_rev_less_than(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) < get_sil_revision(rev))) + +#define is_sil_rev_equal_to(rev) \ + ((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \ + (get_sil_revision(system_rev) == get_sil_revision(rev))) + +#define get_sil_rev() \ + get_sil_revision(system_rev) + +/* Various silicon macros defined here */ +#define OMAP2420_REV_ES1_0 0x24200000 +#define OMAP2420_REV_ES2_0 0x24201000 +#define OMAP2430_REV_ES1_0 0x24300000 +#define OMAP3430_REV_ES1_0 0x34300000 +#define OMAP3430_REV_ES2_0 0x34301000 + +/* + * Macro to detect device type i.e. EMU/HS/TST/GP/BAD + */ +#define DEVICE_TYPE_TEST 0 +#define DEVICE_TYPE_EMU 1 +#define DEVICE_TYPE_SEC 2 +#define DEVICE_TYPE_GP 3 +#define DEVICE_TYPE_BAD 4 + +#define get_device_type() ((system_rev & 0x700) >> 8) +#define is_device_type_test() (get_device_type() == DEVICE_TYPE_TEST) +#define is_device_type_emu() (get_device_type() == DEVICE_TYPE_EMU) +#define is_device_type_sec() (get_device_type() == DEVICE_TYPE_SEC) +#define is_device_type_gp() (get_device_type() == DEVICE_TYPE_GP) +#define is_device_type_bad() (get_device_type() == DEVICE_TYPE_BAD) + +#endif #endif diff --git a/include/asm-arm/arch-omap/dma.h b/include/asm-arm/arch-omap/dma.h index f33b467fddb7..24acf090030d 100644 --- a/include/asm-arm/arch-omap/dma.h +++ b/include/asm-arm/arch-omap/dma.h @@ -45,22 +45,28 @@ #define OMAP_DMA_PCHD_SR (OMAP_DMA_BASE + 0x4c0) /* Hardware registers for omap2 */ -#define OMAP24XX_DMA_BASE (L4_24XX_BASE + 0x56000) -#define OMAP_DMA4_REVISION (OMAP24XX_DMA_BASE + 0x00) -#define OMAP_DMA4_GCR_REG (OMAP24XX_DMA_BASE + 0x78) -#define OMAP_DMA4_IRQSTATUS_L0 (OMAP24XX_DMA_BASE + 0x08) -#define OMAP_DMA4_IRQSTATUS_L1 (OMAP24XX_DMA_BASE + 0x0c) -#define OMAP_DMA4_IRQSTATUS_L2 (OMAP24XX_DMA_BASE + 0x10) -#define OMAP_DMA4_IRQSTATUS_L3 (OMAP24XX_DMA_BASE + 0x14) -#define OMAP_DMA4_IRQENABLE_L0 (OMAP24XX_DMA_BASE + 0x18) -#define OMAP_DMA4_IRQENABLE_L1 (OMAP24XX_DMA_BASE + 0x1c) -#define OMAP_DMA4_IRQENABLE_L2 (OMAP24XX_DMA_BASE + 0x20) -#define OMAP_DMA4_IRQENABLE_L3 (OMAP24XX_DMA_BASE + 0x24) -#define OMAP_DMA4_SYSSTATUS (OMAP24XX_DMA_BASE + 0x28) -#define OMAP_DMA4_CAPS_0 (OMAP24XX_DMA_BASE + 0x64) -#define OMAP_DMA4_CAPS_2 (OMAP24XX_DMA_BASE + 0x6c) -#define OMAP_DMA4_CAPS_3 (OMAP24XX_DMA_BASE + 0x70) -#define OMAP_DMA4_CAPS_4 (OMAP24XX_DMA_BASE + 0x74) +#if defined(CONFIG_ARCH_OMAP3) +#define OMAP_DMA4_BASE (L4_34XX_BASE + 0x56000) +#else /* CONFIG_ARCH_OMAP2 */ +#define OMAP_DMA4_BASE (L4_24XX_BASE + 0x56000) +#endif + +#define OMAP_DMA4_REVISION (OMAP_DMA4_BASE + 0x00) +#define OMAP_DMA4_GCR_REG (OMAP_DMA4_BASE + 0x78) +#define OMAP_DMA4_IRQSTATUS_L0 (OMAP_DMA4_BASE + 0x08) +#define OMAP_DMA4_IRQSTATUS_L1 (OMAP_DMA4_BASE + 0x0c) +#define OMAP_DMA4_IRQSTATUS_L2 (OMAP_DMA4_BASE + 0x10) +#define OMAP_DMA4_IRQSTATUS_L3 (OMAP_DMA4_BASE + 0x14) +#define OMAP_DMA4_IRQENABLE_L0 (OMAP_DMA4_BASE + 0x18) +#define OMAP_DMA4_IRQENABLE_L1 (OMAP_DMA4_BASE + 0x1c) +#define OMAP_DMA4_IRQENABLE_L2 (OMAP_DMA4_BASE + 0x20) +#define OMAP_DMA4_IRQENABLE_L3 (OMAP_DMA4_BASE + 0x24) +#define OMAP_DMA4_SYSSTATUS (OMAP_DMA4_BASE + 0x28) +#define OMAP_DMA4_OCP_SYSCONFIG (OMAP_DMA4_BASE + 0x2c) +#define OMAP_DMA4_CAPS_0 (OMAP_DMA4_BASE + 0x64) +#define OMAP_DMA4_CAPS_2 (OMAP_DMA4_BASE + 0x6c) +#define OMAP_DMA4_CAPS_3 (OMAP_DMA4_BASE + 0x70) +#define OMAP_DMA4_CAPS_4 (OMAP_DMA4_BASE + 0x74) #ifdef CONFIG_ARCH_OMAP1 @@ -86,19 +92,19 @@ #define OMAP_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */ /* Common channel specific registers for omap2 */ -#define OMAP_DMA_CCR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x80) -#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x84) -#define OMAP_DMA_CICR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x88) -#define OMAP_DMA_CSR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x8c) -#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x90) -#define OMAP_DMA_CEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x94) -#define OMAP_DMA_CFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x98) -#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa4) -#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa8) -#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xac) -#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb0) -#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb4) -#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xb8) +#define OMAP_DMA_CCR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x80) +#define OMAP_DMA_CLNK_CTRL_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x84) +#define OMAP_DMA_CICR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x88) +#define OMAP_DMA_CSR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x8c) +#define OMAP_DMA_CSDP_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x90) +#define OMAP_DMA_CEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x94) +#define OMAP_DMA_CFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x98) +#define OMAP_DMA_CSEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa4) +#define OMAP_DMA_CSFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa8) +#define OMAP_DMA_CDEI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xac) +#define OMAP_DMA_CDFI_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb0) +#define OMAP_DMA_CSAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb4) +#define OMAP_DMA_CDAC_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xb8) #endif @@ -113,11 +119,11 @@ #define OMAP1_DMA_LCH_CTRL_REG(n) __REG16(OMAP_DMA_BASE + 0x40 * (n) + 0x2a) /* Channel specific registers only on omap2 */ -#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0x9c) -#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xa0) -#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xbc) -#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc0) -#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP24XX_DMA_BASE + 0x60 * (n) + 0xc4) +#define OMAP2_DMA_CSSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0x9c) +#define OMAP2_DMA_CDSA_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xa0) +#define OMAP2_DMA_CCEN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xbc) +#define OMAP2_DMA_CCFN_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc0) +#define OMAP2_DMA_COLOR_REG(n) __REG32(OMAP_DMA4_BASE + 0x60 * (n) + 0xc4) /*----------------------------------------------------------------------------*/ @@ -297,6 +303,10 @@ #define OMAP_DMA_SYNC_ELEMENT 0x00 #define OMAP_DMA_SYNC_FRAME 0x01 #define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 #define OMAP_DMA_PORT_EMIFF 0x00 #define OMAP_DMA_PORT_EMIFS 0x01 @@ -310,6 +320,29 @@ #define OMAP_DMA_AMODE_SINGLE_IDX 0x02 #define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + /* LCD DMA block numbers */ enum { OMAP_LCD_DMA_B1_TOP, @@ -359,6 +392,13 @@ struct omap_dma_channel_params { int src_or_dst_synch; /* source synch(1) or destination synch(0) */ int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif }; @@ -409,6 +449,33 @@ extern dma_addr_t omap_get_dma_dst_pos(int lch); extern int omap_get_dma_src_addr_counter(int lch); extern void omap_clear_dma(int lch); extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int chain_id, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif /* LCD DMA functions */ extern int omap_request_lcd_dma(void (* callback)(u16 status, void *data), diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 97b397dd7e87..164da09be095 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -62,6 +62,8 @@ #define OMAP_MPUIO_LATCH 0x34 #endif +#define OMAP34XX_NR_GPIOS 6 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) @@ -75,6 +77,8 @@ extern void omap_free_gpio(int gpio); extern void omap_set_gpio_direction(int gpio, int is_input); extern void omap_set_gpio_dataout(int gpio, int enable); extern int omap_get_gpio_datain(int gpio); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); /*-------------------------------------------------------------------------*/ diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h index 3ede58b51db2..87973654e625 100644 --- a/include/asm-arm/arch-omap/irqs.h +++ b/include/asm-arm/arch-omap/irqs.h @@ -263,6 +263,8 @@ #define INT_24XX_GPTIMER10 46 #define INT_24XX_GPTIMER11 47 #define INT_24XX_GPTIMER12 48 +#define INT_24XX_I2C1_IRQ 56 +#define INT_24XX_I2C2_IRQ 57 #define INT_24XX_MCBSP1_IRQ_TX 59 #define INT_24XX_MCBSP1_IRQ_RX 60 #define INT_24XX_MCBSP2_IRQ_TX 62 diff --git a/include/asm-arm/arch-omap/nand.h b/include/asm-arm/arch-omap/nand.h new file mode 100644 index 000000000000..17ae26e35353 --- /dev/null +++ b/include/asm-arm/arch-omap/nand.h @@ -0,0 +1,24 @@ +/* + * include/asm-arm/arch-omap/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include + +struct omap_nand_platform_data { + unsigned int options; + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*nand_setup)(void __iomem *); + int (*dev_ready)(struct omap_nand_platform_data *); + int dma_channel; + void __iomem *gpmc_cs_baseaddr; + void __iomem *gpmc_baseaddr; +}; diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion/debug-macro.S index e2a80641f214..2746220f5d85 100644 --- a/include/asm-arm/arch-orion/debug-macro.S +++ b/include/asm-arm/arch-orion/debug-macro.S @@ -8,9 +8,14 @@ * published by the Free Software Foundation. */ +#include + .macro addruart,rx - mov \rx, #0xf1000000 - orr \rx, \rx, #0x00012000 + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =ORION_REGS_PHYS_BASE + ldrne \rx, =ORION_REGS_VIRT_BASE + orr \rx, \rx, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion/entry-macro.S index b76075a7e44b..cda096b2acfd 100644 --- a/include/asm-arm/arch-orion/entry-macro.S +++ b/include/asm-arm/arch-orion/entry-macro.S @@ -3,8 +3,8 @@ * * Low-level IRQ helper macros for Orion platforms * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion/hardware.h index 8a12d213fbdc..65da374de735 100644 --- a/include/asm-arm/arch-orion/hardware.h +++ b/include/asm-arm/arch-orion/hardware.h @@ -4,7 +4,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * */ #ifndef __ASM_ARCH_HARDWARE_H__ @@ -12,13 +11,11 @@ #include "orion.h" -#define PCI_MEMORY_VADDR ORION_PCI_SYS_MEM_BASE -#define PCI_IO_VADDR ORION_PCI_SYS_IO_BASE +#define pcibios_assign_all_busses() 1 -#define pcibios_assign_all_busses() 1 +#define PCIBIOS_MIN_IO 0x00001000 +#define PCIBIOS_MIN_MEM 0x01000000 +#define PCIMEM_BASE ORION_PCIE_MEM_PHYS_BASE -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE PCI_MEMORY_VADDR /* mem base for VGA */ -#endif /* _ASM_ARCH_HARDWARE_H */ +#endif diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h index f787f752e58c..673a418a7419 100644 --- a/include/asm-arm/arch-orion/orion.h +++ b/include/asm-arm/arch-orion/orion.h @@ -14,32 +14,40 @@ #ifndef __ASM_ARCH_ORION_H__ #define __ASM_ARCH_ORION_H__ -/******************************************************************************* +/***************************************************************************** * Orion Address Map - * Use the same mapping (1:1 virtual:physical) of internal registers and - * PCI system (PCI+PCIE) for all machines. - * Each machine defines the rest of its mapping (e.g. device bus flashes) - ******************************************************************************/ -#define ORION_REGS_BASE 0xf1000000 + * + * virt phys size + * fdd00000 f1000000 1M on-chip peripheral registers + * fde00000 f2000000 1M PCIe I/O space + * fdf00000 f2100000 1M PCI I/O space + * fe000000 f0000000 16M PCIe WA space (Orion-NAS only) + ****************************************************************************/ +#define ORION_REGS_PHYS_BASE 0xf1000000 +#define ORION_REGS_VIRT_BASE 0xfdd00000 #define ORION_REGS_SIZE SZ_1M -#define ORION_PCI_SYS_MEM_BASE 0xe0000000 -#define ORION_PCIE_MEM_BASE ORION_PCI_SYS_MEM_BASE -#define ORION_PCIE_MEM_SIZE SZ_128M -#define ORION_PCI_MEM_BASE (ORION_PCIE_MEM_BASE + ORION_PCIE_MEM_SIZE) -#define ORION_PCI_MEM_SIZE SZ_128M - -#define ORION_PCI_SYS_IO_BASE 0xf2000000 -#define ORION_PCIE_IO_BASE ORION_PCI_SYS_IO_BASE +#define ORION_PCIE_IO_PHYS_BASE 0xf2000000 +#define ORION_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION_PCIE_IO_BUS_BASE 0x00000000 #define ORION_PCIE_IO_SIZE SZ_1M -#define ORION_PCIE_IO_REMAP (ORION_PCIE_IO_BASE - ORION_PCI_SYS_IO_BASE) -#define ORION_PCI_IO_BASE (ORION_PCIE_IO_BASE + ORION_PCIE_IO_SIZE) + +#define ORION_PCI_IO_PHYS_BASE 0xf2100000 +#define ORION_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION_PCI_IO_BUS_BASE 0x00100000 #define ORION_PCI_IO_SIZE SZ_1M -#define ORION_PCI_IO_REMAP (ORION_PCI_IO_BASE - ORION_PCI_SYS_IO_BASE) + /* Relevant only for Orion-NAS */ -#define ORION_PCIE_WA_BASE 0xf0000000 +#define ORION_PCIE_WA_PHYS_BASE 0xf0000000 +#define ORION_PCIE_WA_VIRT_BASE 0xfe000000 #define ORION_PCIE_WA_SIZE SZ_16M +#define ORION_PCIE_MEM_PHYS_BASE 0xe0000000 +#define ORION_PCIE_MEM_SIZE SZ_128M + +#define ORION_PCI_MEM_PHYS_BASE 0xe8000000 +#define ORION_PCI_MEM_SIZE SZ_128M + /******************************************************************************* * Supported Devices & Revisions ******************************************************************************/ @@ -57,25 +65,42 @@ /******************************************************************************* * Orion Registers Map ******************************************************************************/ -#define ORION_DDR_REG_BASE (ORION_REGS_BASE | 0x00000) -#define ORION_DEV_BUS_REG_BASE (ORION_REGS_BASE | 0x10000) -#define ORION_BRIDGE_REG_BASE (ORION_REGS_BASE | 0x20000) -#define ORION_PCI_REG_BASE (ORION_REGS_BASE | 0x30000) -#define ORION_PCIE_REG_BASE (ORION_REGS_BASE | 0x40000) -#define ORION_USB0_REG_BASE (ORION_REGS_BASE | 0x50000) -#define ORION_ETH_REG_BASE (ORION_REGS_BASE | 0x70000) -#define ORION_SATA_REG_BASE (ORION_REGS_BASE | 0x80000) -#define ORION_USB1_REG_BASE (ORION_REGS_BASE | 0xa0000) +#define ORION_DDR_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x00000) +#define ORION_DDR_REG(x) (ORION_DDR_VIRT_BASE | (x)) -#define ORION_DDR_REG(x) (ORION_DDR_REG_BASE | (x)) -#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_REG_BASE | (x)) -#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_REG_BASE | (x)) -#define ORION_PCI_REG(x) (ORION_PCI_REG_BASE | (x)) -#define ORION_PCIE_REG(x) (ORION_PCIE_REG_BASE | (x)) -#define ORION_USB0_REG(x) (ORION_USB0_REG_BASE | (x)) -#define ORION_USB1_REG(x) (ORION_USB1_REG_BASE | (x)) -#define ORION_ETH_REG(x) (ORION_ETH_REG_BASE | (x)) -#define ORION_SATA_REG(x) (ORION_SATA_REG_BASE | (x)) +#define ORION_DEV_BUS_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x10000) +#define ORION_DEV_BUS_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x10000) +#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_VIRT_BASE | (x)) +#define I2C_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x1000) +#define UART0_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2100) + +#define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) +#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) + +#define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) +#define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) + +#define ORION_PCIE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x40000) +#define ORION_PCIE_REG(x) (ORION_PCIE_VIRT_BASE | (x)) + +#define ORION_USB0_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x50000) +#define ORION_USB0_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x50000) +#define ORION_USB0_REG(x) (ORION_USB0_VIRT_BASE | (x)) + +#define ORION_ETH_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x70000) +#define ORION_ETH_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x70000) +#define ORION_ETH_REG(x) (ORION_ETH_VIRT_BASE | (x)) + +#define ORION_SATA_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x80000) +#define ORION_SATA_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x80000) +#define ORION_SATA_REG(x) (ORION_SATA_VIRT_BASE | (x)) + +#define ORION_USB1_PHYS_BASE (ORION_REGS_PHYS_BASE | 0xa0000) +#define ORION_USB1_VIRT_BASE (ORION_REGS_VIRT_BASE | 0xa0000) +#define ORION_USB1_REG(x) (ORION_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -100,9 +125,6 @@ #define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) #define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) -#define I2C_BASE ORION_DEV_BUS_REG(0x1000) -#define UART0_BASE ORION_DEV_BUS_REG(0x2000) -#define UART1_BASE ORION_DEV_BUS_REG(0x2100) #define GPIO_MAX 32 /*************************************************************************** diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion/uncompress.h index a1a222fb438c..59f44039909a 100644 --- a/include/asm-arm/arch-orion/uncompress.h +++ b/include/asm-arm/arch-orion/uncompress.h @@ -10,8 +10,8 @@ #include -#define MV_UART_LSR ((volatile unsigned char *)(UART0_BASE + 0x14)) -#define MV_UART_THR ((volatile unsigned char *)(UART0_BASE + 0x0)) +#define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) +#define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) #define LSR_THRE 0x20 @@ -27,16 +27,6 @@ static void flush(void) { } -static void orion_early_putstr(const char *ptr) -{ - char c; - while ((c = *ptr++) != '\0') { - if (c == '\n') - putc('\r'); - putc(c); - } -} - /* * nothing to do */ diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion/vmalloc.h index 23e2a102fe0c..9d580278d2bc 100644 --- a/include/asm-arm/arch-orion/vmalloc.h +++ b/include/asm-arm/arch-orion/vmalloc.h @@ -2,4 +2,4 @@ * include/asm-arm/arch-orion/vmalloc.h */ -#define VMALLOC_END 0xf0000000 +#define VMALLOC_END 0xfd800000