ASIC3 driver

This is a patch for the Compaq ASIC3 multi function chip, found in many
PDAs (iPAQs, HTCs...).

It is a simplified version of Paul Sokolovsky's first proposal [1].  With
this code, it is basically a GPIO and IRQ expander.  My plan is to add more
features once this patch gets reviewed and accepted.

[1] http://lkml.org/lkml/2007/5/1/46

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Cc: Paul Sokolovsky <pmiscml@gmail.com>
Cc: Ben Dooks <ben@trinity.fluff.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Samuel Ortiz 2008-02-07 00:14:49 -08:00 committed by Linus Torvalds
parent 8f5aa26c75
commit fa9ff4b185
4 changed files with 1093 additions and 0 deletions

View File

@ -15,6 +15,13 @@ config MFD_SM501
interface. The device may be connected by PCI or local bus with
varying functions enabled.
config MFD_ASIC3
bool "Support for Compaq ASIC3"
depends on GENERIC_HARDIRQS && ARM
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
endmenu
menu "Multimedia Capabilities Port drivers"

View File

@ -3,6 +3,7 @@
#
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o
obj-$(CONFIG_MCP) += mcp-core.o
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o

588
drivers/mfd/asic3.c Normal file
View File

@ -0,0 +1,588 @@
/*
* driver/mfd/asic3.c
*
* Compaq ASIC3 support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Copyright 2001 Compaq Computer Corporation.
* Copyright 2004-2005 Phil Blundell
* Copyright 2007 OpenedHand Ltd.
*
* Authors: Phil Blundell <pb@handhelds.org>,
* Samuel Ortiz <sameo@openedhand.com>
*
*/
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/mfd/asic3.h>
static inline void asic3_write_register(struct asic3 *asic,
unsigned int reg, u32 value)
{
iowrite16(value, (unsigned long)asic->mapping +
(reg >> asic->bus_shift));
}
static inline u32 asic3_read_register(struct asic3 *asic,
unsigned int reg)
{
return ioread16((unsigned long)asic->mapping +
(reg >> asic->bus_shift));
}
/* IRQs */
#define MAX_ASIC_ISR_LOOPS 20
#define ASIC3_GPIO_Base_INCR \
(ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base)
static void asic3_irq_flip_edge(struct asic3 *asic,
u32 base, int bit)
{
u16 edge;
unsigned long flags;
spin_lock_irqsave(&asic->lock, flags);
edge = asic3_read_register(asic,
base + ASIC3_GPIO_EdgeTrigger);
edge ^= bit;
asic3_write_register(asic,
base + ASIC3_GPIO_EdgeTrigger, edge);
spin_unlock_irqrestore(&asic->lock, flags);
}
static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
{
int iter, i;
unsigned long flags;
struct asic3 *asic;
desc->chip->ack(irq);
asic = desc->handler_data;
for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
u32 status;
int bank;
spin_lock_irqsave(&asic->lock, flags);
status = asic3_read_register(asic,
ASIC3_OFFSET(INTR, PIntStat));
spin_unlock_irqrestore(&asic->lock, flags);
/* Check all ten register bits */
if ((status & 0x3ff) == 0)
break;
/* Handle GPIO IRQs */
for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) {
if (status & (1 << bank)) {
unsigned long base, istat;
base = ASIC3_GPIO_A_Base
+ bank * ASIC3_GPIO_Base_INCR;
spin_lock_irqsave(&asic->lock, flags);
istat = asic3_read_register(asic,
base +
ASIC3_GPIO_IntStatus);
/* Clearing IntStatus */
asic3_write_register(asic,
base +
ASIC3_GPIO_IntStatus, 0);
spin_unlock_irqrestore(&asic->lock, flags);
for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) {
int bit = (1 << i);
unsigned int irqnr;
if (!(istat & bit))
continue;
irqnr = asic->irq_base +
(ASIC3_GPIOS_PER_BANK * bank)
+ i;
desc = irq_desc + irqnr;
desc->handle_irq(irqnr, desc);
if (asic->irq_bothedge[bank] & bit)
asic3_irq_flip_edge(asic, base,
bit);
}
}
}
/* Handle remaining IRQs in the status register */
for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) {
/* They start at bit 4 and go up */
if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) {
desc = irq_desc + + i;
desc->handle_irq(asic->irq_base + i,
desc);
}
}
}
if (iter >= MAX_ASIC_ISR_LOOPS)
printk(KERN_ERR "%s: interrupt processing overrun\n",
__FUNCTION__);
}
static inline int asic3_irq_to_bank(struct asic3 *asic, int irq)
{
int n;
n = (irq - asic->irq_base) >> 4;
return (n * (ASIC3_GPIO_B_Base - ASIC3_GPIO_A_Base));
}
static inline int asic3_irq_to_index(struct asic3 *asic, int irq)
{
return (irq - asic->irq_base) & 0xf;
}
static void asic3_mask_gpio_irq(unsigned int irq)
{
struct asic3 *asic = get_irq_chip_data(irq);
u32 val, bank, index;
unsigned long flags;
bank = asic3_irq_to_bank(asic, irq);
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
val |= 1 << index;
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
static void asic3_mask_irq(unsigned int irq)
{
struct asic3 *asic = get_irq_chip_data(irq);
int regval;
unsigned long flags;
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask);
regval &= ~(ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
static void asic3_unmask_gpio_irq(unsigned int irq)
{
struct asic3 *asic = get_irq_chip_data(irq);
u32 val, bank, index;
unsigned long flags;
bank = asic3_irq_to_bank(asic, irq);
index = asic3_irq_to_index(asic, irq);
spin_lock_irqsave(&asic->lock, flags);
val = asic3_read_register(asic, bank + ASIC3_GPIO_Mask);
val &= ~(1 << index);
asic3_write_register(asic, bank + ASIC3_GPIO_Mask, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
static void asic3_unmask_irq(unsigned int irq)
{
struct asic3 *asic = get_irq_chip_data(irq);
int regval;
unsigned long flags;
spin_lock_irqsave(&asic->lock, flags);
regval = asic3_read_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask);
regval |= (ASIC3_INTMASK_MASK0 <<
(irq - (asic->irq_base + ASIC3_NUM_GPIOS)));
asic3_write_register(asic,
ASIC3_INTR_Base +
ASIC3_INTR_IntMask,
regval);
spin_unlock_irqrestore(&asic->lock, flags);
}
static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct asic3 *asic = get_irq_chip_data(irq);
u32 bank, index;
u16 trigger, level, edge, bit;
unsigned long flags;
bank = asic3_irq_to_bank(asic, irq);
index = asic3_irq_to_index(asic, irq);
bit = 1<<index;
spin_lock_irqsave(&asic->lock, flags);
level = asic3_read_register(asic,
bank + ASIC3_GPIO_LevelTrigger);
edge = asic3_read_register(asic,
bank + ASIC3_GPIO_EdgeTrigger);
trigger = asic3_read_register(asic,
bank + ASIC3_GPIO_TriggerType);
asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
if (type == IRQT_RISING) {
trigger |= bit;
edge |= bit;
} else if (type == IRQT_FALLING) {
trigger |= bit;
edge &= ~bit;
} else if (type == IRQT_BOTHEDGE) {
trigger |= bit;
if (asic3_gpio_get_value(asic, irq - asic->irq_base))
edge &= ~bit;
else
edge |= bit;
asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
} else if (type == IRQT_LOW) {
trigger &= ~bit;
level &= ~bit;
} else if (type == IRQT_HIGH) {
trigger &= ~bit;
level |= bit;
} else {
/*
* if type == IRQT_NOEDGE, we should mask interrupts, but
* be careful to not unmask them if mask was also called.
* Probably need internal state for mask.
*/
printk(KERN_NOTICE "asic3: irq type not changed.\n");
}
asic3_write_register(asic, bank + ASIC3_GPIO_LevelTrigger,
level);
asic3_write_register(asic, bank + ASIC3_GPIO_EdgeTrigger,
edge);
asic3_write_register(asic, bank + ASIC3_GPIO_TriggerType,
trigger);
spin_unlock_irqrestore(&asic->lock, flags);
return 0;
}
static struct irq_chip asic3_gpio_irq_chip = {
.name = "ASIC3-GPIO",
.ack = asic3_mask_gpio_irq,
.mask = asic3_mask_gpio_irq,
.unmask = asic3_unmask_gpio_irq,
.set_type = asic3_gpio_irq_type,
};
static struct irq_chip asic3_irq_chip = {
.name = "ASIC3",
.ack = asic3_mask_irq,
.mask = asic3_mask_irq,
.unmask = asic3_unmask_irq,
};
static int asic3_irq_probe(struct platform_device *pdev)
{
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned long clksel = 0;
unsigned int irq, irq_base;
asic->irq_nr = platform_get_irq(pdev, 0);
if (asic->irq_nr < 0)
return asic->irq_nr;
/* turn on clock to IRQ controller */
clksel |= CLOCK_SEL_CX;
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
clksel);
irq_base = asic->irq_base;
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
if (irq < asic->irq_base + ASIC3_NUM_GPIOS)
set_irq_chip(irq, &asic3_gpio_irq_chip);
else
set_irq_chip(irq, &asic3_irq_chip);
set_irq_chip_data(irq, asic);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
asic3_write_register(asic, ASIC3_OFFSET(INTR, IntMask),
ASIC3_INTMASK_GINTMASK);
set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
set_irq_type(asic->irq_nr, IRQT_RISING);
set_irq_data(asic->irq_nr, asic);
return 0;
}
static void asic3_irq_remove(struct platform_device *pdev)
{
struct asic3 *asic = platform_get_drvdata(pdev);
unsigned int irq, irq_base;
irq_base = asic->irq_base;
for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) {
set_irq_flags(irq, 0);
set_irq_handler(irq, NULL);
set_irq_chip(irq, NULL);
set_irq_chip_data(irq, NULL);
}
set_irq_chained_handler(asic->irq_nr, NULL);
}
/* GPIOs */
static inline u32 asic3_get_gpio(struct asic3 *asic, unsigned int base,
unsigned int function)
{
return asic3_read_register(asic, base + function);
}
static void asic3_set_gpio(struct asic3 *asic, unsigned int base,
unsigned int function, u32 bits, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&asic->lock, flags);
val |= (asic3_read_register(asic, base + function) & ~bits);
asic3_write_register(asic, base + function, val);
spin_unlock_irqrestore(&asic->lock, flags);
}
#define asic3_get_gpio_a(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_b(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_c(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn)
#define asic3_get_gpio_d(asic, fn) \
asic3_get_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn)
#define asic3_set_gpio_a(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_A_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_b(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_B_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_c(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_C_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_d(asic, fn, bits, val) \
asic3_set_gpio(asic, ASIC3_GPIO_D_Base, ASIC3_GPIO_##fn, bits, val)
#define asic3_set_gpio_banks(asic, fn, bits, pdata, field) \
do { \
asic3_set_gpio_a((asic), fn, (bits), (pdata)->gpio_a.field); \
asic3_set_gpio_b((asic), fn, (bits), (pdata)->gpio_b.field); \
asic3_set_gpio_c((asic), fn, (bits), (pdata)->gpio_c.field); \
asic3_set_gpio_d((asic), fn, (bits), (pdata)->gpio_d.field); \
} while (0)
int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio)
{
u32 mask = ASIC3_GPIO_bit(gpio);
switch (gpio >> 4) {
case ASIC3_GPIO_BANK_A:
return asic3_get_gpio_a(asic, Status) & mask;
case ASIC3_GPIO_BANK_B:
return asic3_get_gpio_b(asic, Status) & mask;
case ASIC3_GPIO_BANK_C:
return asic3_get_gpio_c(asic, Status) & mask;
case ASIC3_GPIO_BANK_D:
return asic3_get_gpio_d(asic, Status) & mask;
default:
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
__FUNCTION__, gpio);
return -EINVAL;
}
}
EXPORT_SYMBOL(asic3_gpio_get_value);
void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val)
{
u32 mask = ASIC3_GPIO_bit(gpio);
u32 bitval = 0;
if (val)
bitval = mask;
switch (gpio >> 4) {
case ASIC3_GPIO_BANK_A:
asic3_set_gpio_a(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_B:
asic3_set_gpio_b(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_C:
asic3_set_gpio_c(asic, Out, mask, bitval);
return;
case ASIC3_GPIO_BANK_D:
asic3_set_gpio_d(asic, Out, mask, bitval);
return;
default:
printk(KERN_ERR "%s: invalid GPIO value 0x%x",
__FUNCTION__, gpio);
return;
}
}
EXPORT_SYMBOL(asic3_gpio_set_value);
static int asic3_gpio_probe(struct platform_device *pdev)
{
struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic = platform_get_drvdata(pdev);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, Mask), 0xffff);
asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, Mask), 0xffff);
asic3_set_gpio_a(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_b(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_c(asic, SleepMask, 0xffff, 0xffff);
asic3_set_gpio_d(asic, SleepMask, 0xffff, 0xffff);
if (pdata) {
asic3_set_gpio_banks(asic, Out, 0xffff, pdata, init);
asic3_set_gpio_banks(asic, Direction, 0xffff, pdata, dir);
asic3_set_gpio_banks(asic, SleepMask, 0xffff, pdata,
sleep_mask);
asic3_set_gpio_banks(asic, SleepOut, 0xffff, pdata, sleep_out);
asic3_set_gpio_banks(asic, BattFaultOut, 0xffff, pdata,
batt_fault_out);
asic3_set_gpio_banks(asic, SleepConf, 0xffff, pdata,
sleep_conf);
asic3_set_gpio_banks(asic, AltFunction, 0xffff, pdata,
alt_function);
}
return 0;
}
static void asic3_gpio_remove(struct platform_device *pdev)
{
return;
}
/* Core */
static int asic3_probe(struct platform_device *pdev)
{
struct asic3_platform_data *pdata = pdev->dev.platform_data;
struct asic3 *asic;
struct resource *mem;
unsigned long clksel;
int ret;
asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
if (!asic)
return -ENOMEM;
spin_lock_init(&asic->lock);
platform_set_drvdata(pdev, asic);
asic->dev = &pdev->dev;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
ret = -ENOMEM;
printk(KERN_ERR "asic3: no MEM resource\n");
goto err_out_1;
}
asic->mapping = ioremap(mem->start, PAGE_SIZE);
if (!asic->mapping) {
ret = -ENOMEM;
printk(KERN_ERR "asic3: couldn't ioremap\n");
goto err_out_1;
}
asic->irq_base = pdata->irq_base;
if (pdata && pdata->bus_shift)
asic->bus_shift = 2 - pdata->bus_shift;
else
asic->bus_shift = 0;
clksel = 0;
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
ret = asic3_irq_probe(pdev);
if (ret < 0) {
printk(KERN_ERR "asic3: couldn't probe IRQs\n");
goto err_out_2;
}
asic3_gpio_probe(pdev);
if (pdata->children) {
int i;
for (i = 0; i < pdata->n_children; i++) {
pdata->children[i]->dev.parent = &pdev->dev;
platform_device_register(pdata->children[i]);
}
}
printk(KERN_INFO "ASIC3 Core driver\n");
return 0;
err_out_2:
iounmap(asic->mapping);
err_out_1:
kfree(asic);
return ret;
}
static int asic3_remove(struct platform_device *pdev)
{
struct asic3 *asic = platform_get_drvdata(pdev);
asic3_gpio_remove(pdev);
asic3_irq_remove(pdev);
asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0);
iounmap(asic->mapping);
kfree(asic);
return 0;
}
static void asic3_shutdown(struct platform_device *pdev)
{
}
static struct platform_driver asic3_device_driver = {
.driver = {
.name = "asic3",
},
.probe = asic3_probe,
.remove = __devexit_p(asic3_remove),
.shutdown = asic3_shutdown,
};
static int __init asic3_init(void)
{
int retval = 0;
retval = platform_driver_register(&asic3_device_driver);
return retval;
}
subsys_initcall(asic3_init);

497
include/linux/mfd/asic3.h Normal file
View File

@ -0,0 +1,497 @@
/*
* include/linux/mfd/asic3.h
*
* Compaq ASIC3 headers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Copyright 2001 Compaq Computer Corporation.
* Copyright 2007 OpendHand.
*/
#ifndef __ASIC3_H__
#define __ASIC3_H__
#include <linux/types.h>
struct asic3 {
void __iomem *mapping;
unsigned int bus_shift;
unsigned int irq_nr;
unsigned int irq_base;
spinlock_t lock;
u16 irq_bothedge[4];
struct device *dev;
};
struct asic3_platform_data {
struct {
u32 dir;
u32 init;
u32 sleep_mask;
u32 sleep_out;
u32 batt_fault_out;
u32 sleep_conf;
u32 alt_function;
} gpio_a, gpio_b, gpio_c, gpio_d;
unsigned int bus_shift;
unsigned int irq_base;
struct platform_device **children;
unsigned int n_children;
};
int asic3_gpio_get_value(struct asic3 *asic, unsigned gpio);
void asic3_gpio_set_value(struct asic3 *asic, unsigned gpio, int val);
#define ASIC3_NUM_GPIO_BANKS 4
#define ASIC3_GPIOS_PER_BANK 16
#define ASIC3_NUM_GPIOS 64
#define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6
#define ASIC3_GPIO_BANK_A 0
#define ASIC3_GPIO_BANK_B 1
#define ASIC3_GPIO_BANK_C 2
#define ASIC3_GPIO_BANK_D 3
#define ASIC3_GPIO(bank, gpio) \
((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio))
#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
/* All offsets below are specified with this address bus shift */
#define ASIC3_DEFAULT_ADDR_SHIFT 2
#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_Base + ASIC3_##base##_##reg)
#define ASIC3_GPIO_OFFSET(base, reg) \
(ASIC3_GPIO_##base##_Base + ASIC3_GPIO_##reg)
#define ASIC3_GPIO_A_Base 0x0000
#define ASIC3_GPIO_B_Base 0x0100
#define ASIC3_GPIO_C_Base 0x0200
#define ASIC3_GPIO_D_Base 0x0300
#define ASIC3_GPIO_Mask 0x00 /* R/W 0:don't mask */
#define ASIC3_GPIO_Direction 0x04 /* R/W 0:input */
#define ASIC3_GPIO_Out 0x08 /* R/W 0:output low */
#define ASIC3_GPIO_TriggerType 0x0c /* R/W 0:level */
#define ASIC3_GPIO_EdgeTrigger 0x10 /* R/W 0:falling */
#define ASIC3_GPIO_LevelTrigger 0x14 /* R/W 0:low level detect */
#define ASIC3_GPIO_SleepMask 0x18 /* R/W 0:don't mask in sleep mode */
#define ASIC3_GPIO_SleepOut 0x1c /* R/W level 0:low in sleep mode */
#define ASIC3_GPIO_BattFaultOut 0x20 /* R/W level 0:low in batt_fault */
#define ASIC3_GPIO_IntStatus 0x24 /* R/W 0:none, 1:detect */
#define ASIC3_GPIO_AltFunction 0x28 /* R/W 1:LED register control */
#define ASIC3_GPIO_SleepConf 0x2c /*
* R/W bit 1: autosleep
* 0: disable gposlpout in normal mode,
* enable gposlpout in sleep mode.
*/
#define ASIC3_GPIO_Status 0x30 /* R Pin status */
#define ASIC3_SPI_Base 0x0400
#define ASIC3_SPI_Control 0x0000
#define ASIC3_SPI_TxData 0x0004
#define ASIC3_SPI_RxData 0x0008
#define ASIC3_SPI_Int 0x000c
#define ASIC3_SPI_Status 0x0010
#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */
#define ASIC3_PWM_0_Base 0x0500
#define ASIC3_PWM_1_Base 0x0600
#define ASIC3_PWM_TimeBase 0x0000
#define ASIC3_PWM_PeriodTime 0x0004
#define ASIC3_PWM_DutyTime 0x0008
#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */
#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */
#define ASIC3_LED_0_Base 0x0700
#define ASIC3_LED_1_Base 0x0800
#define ASIC3_LED_2_Base 0x0900
#define ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */
#define ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */
#define ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */
#define ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */
/* LED TimeBase bits - match ASIC2 */
#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */
/* Note: max = 5 on hx4700 */
/* 0: maximum time base */
/* 1: maximum time base / 2 */
/* n: maximum time base / 2^n */
#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
#define ASIC3_CLOCK_Base 0x0A00
#define ASIC3_CLOCK_CDEX 0x00
#define ASIC3_CLOCK_SEL 0x04
#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */
#define CLOCK_CDEX_SOURCE0 (1 << 0)
#define CLOCK_CDEX_SOURCE1 (1 << 1)
#define CLOCK_CDEX_SPI (1 << 2)
#define CLOCK_CDEX_OWM (1 << 3)
#define CLOCK_CDEX_PWM0 (1 << 4)
#define CLOCK_CDEX_PWM1 (1 << 5)
#define CLOCK_CDEX_LED0 (1 << 6)
#define CLOCK_CDEX_LED1 (1 << 7)
#define CLOCK_CDEX_LED2 (1 << 8)
/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */
#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source */
#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source ctrl */
#define CLOCK_CDEX_SMBUS (1 << 11)
#define CLOCK_CDEX_CONTROL_CX (1 << 12)
#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */
#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */
#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select */
#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select */
/* R/W: INT clock source control (32.768 kHz) */
#define CLOCK_SEL_CX (1 << 2)
#define ASIC3_INTR_Base 0x0B00
#define ASIC3_INTR_IntMask 0x00 /* Interrupt mask control */
#define ASIC3_INTR_PIntStat 0x04 /* Peripheral interrupt status */
#define ASIC3_INTR_IntCPS 0x08 /* Interrupt timer clock pre-scale */
#define ASIC3_INTR_IntTBS 0x0c /* Interrupt timer set */
#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */
#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */
#define ASIC3_INTMASK_MASK0 (1 << 2)
#define ASIC3_INTMASK_MASK1 (1 << 3)
#define ASIC3_INTMASK_MASK2 (1 << 4)
#define ASIC3_INTMASK_MASK3 (1 << 5)
#define ASIC3_INTMASK_MASK4 (1 << 6)
#define ASIC3_INTMASK_MASK5 (1 << 7)
#define ASIC3_INTR_PERIPHERAL_A (1 << 0)
#define ASIC3_INTR_PERIPHERAL_B (1 << 1)
#define ASIC3_INTR_PERIPHERAL_C (1 << 2)
#define ASIC3_INTR_PERIPHERAL_D (1 << 3)
#define ASIC3_INTR_LED0 (1 << 4)
#define ASIC3_INTR_LED1 (1 << 5)
#define ASIC3_INTR_LED2 (1 << 6)
#define ASIC3_INTR_SPI (1 << 7)
#define ASIC3_INTR_SMBUS (1 << 8)
#define ASIC3_INTR_OWM (1 << 9)
#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */
#define ASIC3_INTR_CPS_SET (1 << 4) /* Time base enable */
/* Basic control of the SD ASIC */
#define ASIC3_SDHWCTRL_Base 0x0E00
#define ASIC3_SDHWCTRL_SDConf 0x00
#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */
#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */
#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */
#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* SD card detection: 0:low */
/* SD card write protection: 0=high */
#define ASIC3_SDHWCTRL_LEVWP (1 << 4)
#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 0=disable */
/* SD card power supply ctrl 1=enable */
#define ASIC3_SDHWCTRL_SDPWR (1 << 6)
#define ASIC3_EXTCF_Base 0x1100
#define ASIC3_EXTCF_Select 0x00
#define ASIC3_EXTCF_Reset 0x04
#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */
#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */
#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */
#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */
#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */
#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* ?? used by OWM and CF */
#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state */
#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state */
#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */
#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */
#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */
#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */
#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14)
#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */
/*********************************************
* The Onewire interface registers
*
* OWM_CMD
* OWM_DAT
* OWM_INTR
* OWM_INTEN
* OWM_CLKDIV
*
*********************************************/
#define ASIC3_OWM_Base 0xC00
#define ASIC3_OWM_CMD 0x00
#define ASIC3_OWM_DAT 0x04
#define ASIC3_OWM_INTR 0x08
#define ASIC3_OWM_INTEN 0x0C
#define ASIC3_OWM_CLKDIV 0x10
#define ASIC3_OWM_CMD_ONEWR (1 << 0)
#define ASIC3_OWM_CMD_SRA (1 << 1)
#define ASIC3_OWM_CMD_DQO (1 << 2)
#define ASIC3_OWM_CMD_DQI (1 << 3)
#define ASIC3_OWM_INTR_PD (1 << 0)
#define ASIC3_OWM_INTR_PDR (1 << 1)
#define ASIC3_OWM_INTR_TBE (1 << 2)
#define ASIC3_OWM_INTR_TEMP (1 << 3)
#define ASIC3_OWM_INTR_RBF (1 << 4)
#define ASIC3_OWM_INTEN_EPD (1 << 0)
#define ASIC3_OWM_INTEN_IAS (1 << 1)
#define ASIC3_OWM_INTEN_ETBE (1 << 2)
#define ASIC3_OWM_INTEN_ETMT (1 << 3)
#define ASIC3_OWM_INTEN_ERBF (1 << 4)
#define ASIC3_OWM_CLKDIV_PRE (3 << 0) /* two bits wide at bit 0 */
#define ASIC3_OWM_CLKDIV_DIV (7 << 2) /* 3 bits wide at bit 2 */
/*****************************************************************************
* The SD configuration registers are at a completely different location
* in memory. They are divided into three sets of registers:
*
* SD_CONFIG Core configuration register
* SD_CTRL Control registers for SD operations
* SDIO_CTRL Control registers for SDIO operations
*
*****************************************************************************/
#define ASIC3_SD_CONFIG_Base 0x0400 /* Assumes 32 bit addressing */
#define ASIC3_SD_CONFIG_Command 0x08 /* R/W: Command */
/* [0:8] SD Control Register Base Address */
#define ASIC3_SD_CONFIG_Addr0 0x20
/* [9:31] SD Control Register Base Address */
#define ASIC3_SD_CONFIG_Addr1 0x24
/* R/O: interrupt assigned to pin */
#define ASIC3_SD_CONFIG_IntPin 0x78
/*
* Set to 0x1f to clock SD controller, 0 otherwise.
* At 0x82 - Gated Clock Ctrl
*/
#define ASIC3_SD_CONFIG_ClkStop 0x80
/* Control clock of SD controller */
#define ASIC3_SD_CONFIG_ClockMode 0x84
#define ASIC3_SD_CONFIG_SDHC_PinStatus 0x88 /* R/0: SD pins status */
#define ASIC3_SD_CONFIG_SDHC_Power1 0x90 /* Power1 - manual pwr ctrl */
/* auto power up after card inserted */
#define ASIC3_SD_CONFIG_SDHC_Power2 0x92
/* auto power down when card removed */
#define ASIC3_SD_CONFIG_SDHC_Power3 0x94
#define ASIC3_SD_CONFIG_SDHC_CardDetect 0x98
#define ASIC3_SD_CONFIG_SDHC_Slot 0xA0 /* R/O: support slot number */
#define ASIC3_SD_CONFIG_SDHC_ExtGateClk1 0x1E0 /* Not used */
#define ASIC3_SD_CONFIG_SDHC_ExtGateClk2 0x1E2 /* Not used*/
/* GPIO Output Reg. , at 0x1EA - GPIO Output Enable Reg. */
#define ASIC3_SD_CONFIG_SDHC_GPIO_OutAndEnable 0x1E8
#define ASIC3_SD_CONFIG_SDHC_GPIO_Status 0x1EC /* GPIO Status Reg. */
/* Bit 1: double buffer/single buffer */
#define ASIC3_SD_CONFIG_SDHC_ExtGateClk3 0x1F0
/* Memory access enable (set to 1 to access SD Controller) */
#define SD_CONFIG_COMMAND_MAE (1<<1)
#define SD_CONFIG_CLK_ENABLE_ALL 0x1f
#define SD_CONFIG_POWER1_PC_33V 0x0200 /* Set for 3.3 volts */
#define SD_CONFIG_POWER1_PC_OFF 0x0000 /* Turn off power */
/* two bits - number of cycles for card detection */
#define SD_CONFIG_CARDDETECTMODE_CLK ((x) & 0x3)
#define ASIC3_SD_CTRL_Base 0x1000
#define ASIC3_SD_CTRL_Cmd 0x00
#define ASIC3_SD_CTRL_Arg0 0x08
#define ASIC3_SD_CTRL_Arg1 0x0C
#define ASIC3_SD_CTRL_StopInternal 0x10
#define ASIC3_SD_CTRL_TransferSectorCount 0x14
#define ASIC3_SD_CTRL_Response0 0x18
#define ASIC3_SD_CTRL_Response1 0x1C
#define ASIC3_SD_CTRL_Response2 0x20
#define ASIC3_SD_CTRL_Response3 0x24
#define ASIC3_SD_CTRL_Response4 0x28
#define ASIC3_SD_CTRL_Response5 0x2C
#define ASIC3_SD_CTRL_Response6 0x30
#define ASIC3_SD_CTRL_Response7 0x34
#define ASIC3_SD_CTRL_CardStatus 0x38
#define ASIC3_SD_CTRL_BufferCtrl 0x3C
#define ASIC3_SD_CTRL_IntMaskCard 0x40
#define ASIC3_SD_CTRL_IntMaskBuffer 0x44
#define ASIC3_SD_CTRL_CardClockCtrl 0x48
#define ASIC3_SD_CTRL_MemCardXferDataLen 0x4C
#define ASIC3_SD_CTRL_MemCardOptionSetup 0x50
#define ASIC3_SD_CTRL_ErrorStatus0 0x58
#define ASIC3_SD_CTRL_ErrorStatus1 0x5C
#define ASIC3_SD_CTRL_DataPort 0x60
#define ASIC3_SD_CTRL_TransactionCtrl 0x68
#define ASIC3_SD_CTRL_SoftwareReset 0x1C0
#define SD_CTRL_SOFTWARE_RESET_CLEAR (1<<0)
#define SD_CTRL_TRANSACTIONCONTROL_SET (1<<8)
#define SD_CTRL_CARDCLOCKCONTROL_FOR_SD_CARD (1<<15)
#define SD_CTRL_CARDCLOCKCONTROL_ENABLE_CLOCK (1<<8)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_512 (1<<7)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_256 (1<<6)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_128 (1<<5)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_64 (1<<4)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_32 (1<<3)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_16 (1<<2)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_8 (1<<1)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_4 (1<<0)
#define SD_CTRL_CARDCLOCKCONTROL_CLK_DIV_2 (0<<0)
#define MEM_CARD_OPTION_REQUIRED 0x000e
#define MEM_CARD_OPTION_DATA_RESPONSE_TIMEOUT(x) (((x) & 0x0f) << 4)
#define MEM_CARD_OPTION_C2_MODULE_NOT_PRESENT (1<<14)
#define MEM_CARD_OPTION_DATA_XFR_WIDTH_1 (1<<15)
#define MEM_CARD_OPTION_DATA_XFR_WIDTH_4 0
#define SD_CTRL_COMMAND_INDEX(x) ((x) & 0x3f)
#define SD_CTRL_COMMAND_TYPE_CMD (0 << 6)
#define SD_CTRL_COMMAND_TYPE_ACMD (1 << 6)
#define SD_CTRL_COMMAND_TYPE_AUTHENTICATION (2 << 6)
#define SD_CTRL_COMMAND_RESPONSE_TYPE_NORMAL (0 << 8)
#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1 (4 << 8)
#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R1B (5 << 8)
#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R2 (6 << 8)
#define SD_CTRL_COMMAND_RESPONSE_TYPE_EXT_R3 (7 << 8)
#define SD_CTRL_COMMAND_DATA_PRESENT (1 << 11)
#define SD_CTRL_COMMAND_TRANSFER_READ (1 << 12)
#define SD_CTRL_COMMAND_TRANSFER_WRITE (0 << 12)
#define SD_CTRL_COMMAND_MULTI_BLOCK (1 << 13)
#define SD_CTRL_COMMAND_SECURITY_CMD (1 << 14)
#define SD_CTRL_STOP_INTERNAL_ISSSUE_CMD12 (1 << 0)
#define SD_CTRL_STOP_INTERNAL_AUTO_ISSUE_CMD12 (1 << 8)
#define SD_CTRL_CARDSTATUS_RESPONSE_END (1 << 0)
#define SD_CTRL_CARDSTATUS_RW_END (1 << 2)
#define SD_CTRL_CARDSTATUS_CARD_REMOVED_0 (1 << 3)
#define SD_CTRL_CARDSTATUS_CARD_INSERTED_0 (1 << 4)
#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_0 (1 << 5)
#define SD_CTRL_CARDSTATUS_WRITE_PROTECT (1 << 7)
#define SD_CTRL_CARDSTATUS_CARD_REMOVED_3 (1 << 8)
#define SD_CTRL_CARDSTATUS_CARD_INSERTED_3 (1 << 9)
#define SD_CTRL_CARDSTATUS_SIGNAL_STATE_PRESENT_3 (1 << 10)
#define SD_CTRL_BUFFERSTATUS_CMD_INDEX_ERROR (1 << 0)
#define SD_CTRL_BUFFERSTATUS_CRC_ERROR (1 << 1)
#define SD_CTRL_BUFFERSTATUS_STOP_BIT_END_ERROR (1 << 2)
#define SD_CTRL_BUFFERSTATUS_DATA_TIMEOUT (1 << 3)
#define SD_CTRL_BUFFERSTATUS_BUFFER_OVERFLOW (1 << 4)
#define SD_CTRL_BUFFERSTATUS_BUFFER_UNDERFLOW (1 << 5)
#define SD_CTRL_BUFFERSTATUS_CMD_TIMEOUT (1 << 6)
#define SD_CTRL_BUFFERSTATUS_UNK7 (1 << 7)
#define SD_CTRL_BUFFERSTATUS_BUFFER_READ_ENABLE (1 << 8)
#define SD_CTRL_BUFFERSTATUS_BUFFER_WRITE_ENABLE (1 << 9)
#define SD_CTRL_BUFFERSTATUS_ILLEGAL_FUNCTION (1 << 13)
#define SD_CTRL_BUFFERSTATUS_CMD_BUSY (1 << 14)
#define SD_CTRL_BUFFERSTATUS_ILLEGAL_ACCESS (1 << 15)
#define SD_CTRL_INTMASKCARD_RESPONSE_END (1 << 0)
#define SD_CTRL_INTMASKCARD_RW_END (1 << 2)
#define SD_CTRL_INTMASKCARD_CARD_REMOVED_0 (1 << 3)
#define SD_CTRL_INTMASKCARD_CARD_INSERTED_0 (1 << 4)
#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_0 (1 << 5)
#define SD_CTRL_INTMASKCARD_UNK6 (1 << 6)
#define SD_CTRL_INTMASKCARD_WRITE_PROTECT (1 << 7)
#define SD_CTRL_INTMASKCARD_CARD_REMOVED_3 (1 << 8)
#define SD_CTRL_INTMASKCARD_CARD_INSERTED_3 (1 << 9)
#define SD_CTRL_INTMASKCARD_SIGNAL_STATE_PRESENT_3 (1 << 10)
#define SD_CTRL_INTMASKBUFFER_CMD_INDEX_ERROR (1 << 0)
#define SD_CTRL_INTMASKBUFFER_CRC_ERROR (1 << 1)
#define SD_CTRL_INTMASKBUFFER_STOP_BIT_END_ERROR (1 << 2)
#define SD_CTRL_INTMASKBUFFER_DATA_TIMEOUT (1 << 3)
#define SD_CTRL_INTMASKBUFFER_BUFFER_OVERFLOW (1 << 4)
#define SD_CTRL_INTMASKBUFFER_BUFFER_UNDERFLOW (1 << 5)
#define SD_CTRL_INTMASKBUFFER_CMD_TIMEOUT (1 << 6)
#define SD_CTRL_INTMASKBUFFER_UNK7 (1 << 7)
#define SD_CTRL_INTMASKBUFFER_BUFFER_READ_ENABLE (1 << 8)
#define SD_CTRL_INTMASKBUFFER_BUFFER_WRITE_ENABLE (1 << 9)
#define SD_CTRL_INTMASKBUFFER_ILLEGAL_FUNCTION (1 << 13)
#define SD_CTRL_INTMASKBUFFER_CMD_BUSY (1 << 14)
#define SD_CTRL_INTMASKBUFFER_ILLEGAL_ACCESS (1 << 15)
#define SD_CTRL_DETAIL0_RESPONSE_CMD_ERROR (1 << 0)
#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 2)
#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_RESPONSE_CMD12 (1 << 3)
#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_READ_DATA (1 << 4)
#define SD_CTRL_DETAIL0_END_BIT_ERROR_FOR_WRITE_CRC_STATUS (1 << 5)
#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_NON_CMD12 (1 << 8)
#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_RESPONSE_CMD12 (1 << 9)
#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_READ_DATA (1 << 10)
#define SD_CTRL_DETAIL0_CRC_ERROR_FOR_WRITE_CMD (1 << 11)
#define SD_CTRL_DETAIL1_NO_CMD_RESPONSE (1 << 0)
#define SD_CTRL_DETAIL1_TIMEOUT_READ_DATA (1 << 4)
#define SD_CTRL_DETAIL1_TIMEOUT_CRS_STATUS (1 << 5)
#define SD_CTRL_DETAIL1_TIMEOUT_CRC_BUSY (1 << 6)
#define ASIC3_SDIO_CTRL_Base 0x1200
#define ASIC3_SDIO_CTRL_Cmd 0x00
#define ASIC3_SDIO_CTRL_CardPortSel 0x04
#define ASIC3_SDIO_CTRL_Arg0 0x08
#define ASIC3_SDIO_CTRL_Arg1 0x0C
#define ASIC3_SDIO_CTRL_TransferBlockCount 0x14
#define ASIC3_SDIO_CTRL_Response0 0x18
#define ASIC3_SDIO_CTRL_Response1 0x1C
#define ASIC3_SDIO_CTRL_Response2 0x20
#define ASIC3_SDIO_CTRL_Response3 0x24
#define ASIC3_SDIO_CTRL_Response4 0x28
#define ASIC3_SDIO_CTRL_Response5 0x2C
#define ASIC3_SDIO_CTRL_Response6 0x30
#define ASIC3_SDIO_CTRL_Response7 0x34
#define ASIC3_SDIO_CTRL_CardStatus 0x38
#define ASIC3_SDIO_CTRL_BufferCtrl 0x3C
#define ASIC3_SDIO_CTRL_IntMaskCard 0x40
#define ASIC3_SDIO_CTRL_IntMaskBuffer 0x44
#define ASIC3_SDIO_CTRL_CardXferDataLen 0x4C
#define ASIC3_SDIO_CTRL_CardOptionSetup 0x50
#define ASIC3_SDIO_CTRL_ErrorStatus0 0x54
#define ASIC3_SDIO_CTRL_ErrorStatus1 0x58
#define ASIC3_SDIO_CTRL_DataPort 0x60
#define ASIC3_SDIO_CTRL_TransactionCtrl 0x68
#define ASIC3_SDIO_CTRL_CardIntCtrl 0x6C
#define ASIC3_SDIO_CTRL_ClocknWaitCtrl 0x70
#define ASIC3_SDIO_CTRL_HostInformation 0x74
#define ASIC3_SDIO_CTRL_ErrorCtrl 0x78
#define ASIC3_SDIO_CTRL_LEDCtrl 0x7C
#define ASIC3_SDIO_CTRL_SoftwareReset 0x1C0
#define ASIC3_MAP_SIZE 0x2000
#endif /* __ASIC3_H__ */