diff --git a/Documentation/devicetree/bindings/video/ssd1289fb.txt b/Documentation/devicetree/bindings/video/ssd1289fb.txt new file mode 100644 index 000000000000..4fcd5e68cb6e --- /dev/null +++ b/Documentation/devicetree/bindings/video/ssd1289fb.txt @@ -0,0 +1,13 @@ +* Solomon SSD1289 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,ssd1289fb". The only supported bus for + now is lbc. + - reg: Should contain address of the controller on the LBC bus. The detail + was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt + +Examples: +display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; +}; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f0a893142cee..fa395179ddd6 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -402,8 +402,7 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP) - select RELOCATABLE if PPC64 || 44x - select DYNAMIC_MEMSTART if FSL_BOOKE + select RELOCATABLE if PPC64 || 44x || FSL_BOOKE help Build a kernel suitable for use as a kdump capture kernel. The same kernel binary can be used as production kernel and dump @@ -884,7 +883,7 @@ config DYNAMIC_MEMSTART config RELOCATABLE bool "Build a relocatable kernel" - depends on ADVANCED_OPTIONS && FLATMEM && 44x + depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE) select NONSTATIC_KERNEL help This builds a kernel image that is capable of running at the diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index ca7f08cc4afd..90e9d9548660 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ uartlite.c mpc52xx-psc.c src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c -src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c +src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c -src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c +src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c src-plat-y := of.c epapr.c src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ @@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ cuboot-c2k.c gamecube-head.S \ gamecube.c wii-head.S wii.c holly.c \ - prpmc2800.c + prpmc2800.c fixed-head.S mvme5100.c src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c @@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k image-$(CONFIG_GAMECUBE) += dtbImage.gamecube image-$(CONFIG_WII) += dtbImage.wii +image-$(CONFIG_MVME5100) += dtbImage.mvme5100 # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi new file mode 100644 index 000000000000..d3cc8d0f7c25 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma2: dma@102300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x102300 0x4>, + <0x102600 0x4>; + ranges = <0x0 0x102100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <464 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <465 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <466 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <467 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <468 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <469 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <470 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <471 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 68cc5e7f6477..642dc3a83d0e 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index adb82fd9057f..407cb5fd0f5b 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index e179803a81ef..ebf202234549 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -40,7 +40,8 @@ * pin muxing when the DIU is enabled. */ compatible = "fsl,p1022-elbc", "fsl,elbc"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index f1105bffa915..81437fdf1db4 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0xa000 */ diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts new file mode 100644 index 000000000000..1ecb341a232a --- /dev/null +++ b/arch/powerpc/boot/dts/mvme5100.dts @@ -0,0 +1,185 @@ +/* + * Device Tree Source for Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "MVME5100"; + compatible = "MVME5100"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7410 { + device_type = "cpu"; + reg = <0x0>; + /* Following required by dtc but not used */ + d-cache-line-size = <32>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + timebase-frequency = <25000000>; + clock-frequency = <500000000>; + bus-frequency = <100000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + hawk@fef80000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hawk-bridge", "simple-bus"; + ranges = <0x0 0xfef80000 0x10000>; + reg = <0xfef80000 0x10000>; + + serial0: serial@8000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8000 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + serial1: serial@8200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8200 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@f3f80000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0xf3f80000 0x40000>; + }; + }; + + pci0: pci@feff0000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "hawk-pci"; + reg = <0xfec00000 0x400000>; + 8259-interrupt-acknowledge = <0xfeff0030>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* + * This definition (IDSEL 11) duplicates the + * interrupts definition in the i8259 + * interrupt controller below. + * + * Do not change the interrupt sense/polarity from + * 0x2 to anything else, doing so will cause endless + * "spurious" i8259 interrupts to be fielded. + */ + // IDSEL 11 - iPMC712 PCI/ISA Bridge + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 + + /* IDSEL 12 - Not Used */ + + /* IDSEL 13 - Universe VME Bridge */ + 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 + + /* IDSEL 14 - ENET 1 */ + 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 + + /* IDSEL 15 - Not Used */ + + /* IDSEL 16 - PMC Slot 1 */ + 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 + + /* IDSEL 17 - PMC Slot 2 */ + 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 + + /* IDSEL 18 - Not Used */ + + /* IDSEL 19 - ENET 2 */ + 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 + + /* IDSEL 20 - PMCSPAN (PCI-X) */ + 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 + + >; + + isa { + #address-cells = <2>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "isa"; + compatible = "isa"; + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + #interrupt-cells = <2>; + #address-cells = <0>; + interrupts = <0 2>; + device_type = "interrupt-controller"; + compatible = "chrp,iic"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + interrupt-parent = <&mpic>; + }; + + }; + + }; + + chosen { + linux,stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts new file mode 100644 index 000000000000..767d4c032857 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts @@ -0,0 +1,23 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi new file mode 100644 index 000000000000..434fb2d58575 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts similarity index 64% rename from arch/powerpc/boot/dts/p1010rdb_36b.dts rename to arch/powerpc/boot/dts/p1010rdb-pa_36b.dts index 64776f4a4651..3033371bc007 100644 --- a/arch/powerpc/boot/dts/p1010rdb_36b.dts +++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts @@ -38,52 +38,9 @@ model = "fsl,P1010RDB"; compatible = "fsl,P1010RDB"; - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@fffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0xf 0xee000000 0x02000000 - 0x1 0x0 0xf 0xff800000 0x00010000 - 0x3 0x0 0xf 0xffb00000 0x00000020>; - reg = <0xf 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; + /include/ "p1010rdb_36b.dtsi" }; /include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" /include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts new file mode 100644 index 000000000000..6eeb7d3185be --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts @@ -0,0 +1,35 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts new file mode 100644 index 000000000000..7ab3c907b326 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts @@ -0,0 +1,58 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts deleted file mode 100644 index b868d22984e9..000000000000 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * P1010 RDB Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/p1010si-pre.dtsi" - -/ { - model = "fsl,P1010RDB"; - compatible = "fsl,P1010RDB"; - - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@ffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0x0 0xee000000 0x02000000 - 0x1 0x0 0x0 0xff800000 0x00010000 - 0x3 0x0 0x0 0xffb00000 0x00000020>; - reg = <0x0 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@ffe00000 { - ranges = <0x0 0x0 0xffe00000 0x100000>; - }; - - pci0: pcie@ffe09000 { - reg = <0 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@ffe0a000 { - reg = <0 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "p1010rdb.dtsi" -/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi index ec7c27a64671..ea534efa790d 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -69,49 +69,11 @@ }; }; - nand@1,0 { + ifc_nand: nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND Linux Kernel Image"; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND Compressed RFS Image"; - }; - - partition@a00000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00f00000>; - label = "NAND JFFS2 Root File System"; - }; - - partition@1900000 { - /* 7MB for User Area */ - reg = <0x01900000 0x00700000>; - label = "NAND User area"; - }; }; cpld@3,0 { @@ -193,17 +155,14 @@ mdio@24000 { phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; reg = <0x1>; }; phy1: ethernet-phy@1 { - interrupts = <2 1 0 0>; reg = <0x0>; }; phy2: ethernet-phy@2 { - interrupts = <2 1 0 0>; reg = <0x2>; }; diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi new file mode 100644 index 000000000000..fdc19aab2f70 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi new file mode 100644 index 000000000000..de2fceed4f79 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi index 873da350d01b..957e0dc1dc0f 100644 --- a/arch/powerpc/boot/dts/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -146,8 +146,9 @@ */ }; rtc@68 { - compatible = "dallas,ds1339"; + compatible = "dallas,ds3232"; reg = <0x68>; + interrupts = <0x1 0x1 0 0>; }; adt7461@4c { compatible = "adi,adt7461"; diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts new file mode 100644 index 000000000000..9036a4987905 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi new file mode 100644 index 000000000000..8453501c256e --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dtsi @@ -0,0 +1,280 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c new file mode 100644 index 000000000000..cb865f83c60b --- /dev/null +++ b/arch/powerpc/boot/mvme5100.c @@ -0,0 +1,27 @@ +/* + * Motorola/Emerson MVME5100 with PPCBug firmware. + * + * Author: Stephen Chivers + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ +#include "types.h" +#include "ops.h" +#include "io.h" + +BSS_STACK(4096); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize; + + heapsize = 0x8000000 - (u32)_end; /* 128M */ + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 2e1af74a64be..d27a25518b01 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -265,6 +265,10 @@ epapr) link_address='0x20000000' pie=-pie ;; +mvme5100) + platformo="$object/fixed-head.o $object/mvme5100.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" diff --git a/arch/powerpc/configs/85xx/p1023_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig deleted file mode 100644 index b06d37da44f4..000000000000 --- a/arch/powerpc/configs/85xx/p1023_defconfig +++ /dev/null @@ -1,188 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_RCU_FANOUT=32 -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_P1023_RDB=y -CONFIG_P1023_RDS=y -CONFIG_QUICC_ENGINE=y -CONFIG_QE_GPIO=y -CONFIG_CPM2=y -CONFIG_HIGHMEM=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -CONFIG_SWIOTLB=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEAER is not set -# CONFIG_PCIEASPM is not set -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -CONFIG_INET_ESP=y -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_IP_SCTP=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_LEGACY=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_LOGGING=y -CONFIG_ATA=y -CONFIG_SATA_FSL=y -CONFIG_SATA_SIL24=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_FS_ENET=y -CONFIG_FSL_PQ_MDIO=y -CONFIG_E1000E=y -CONFIG_PHYLIB=y -CONFIG_AT803X_PHY=y -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_FIXED_PHY=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_CPM=m -CONFIG_I2C_MPC=y -CONFIG_GPIO_MPC8XXX=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_STORAGE=y -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_CMOS=y -CONFIG_DMADEVICES=y -CONFIG_FSL_DMA=y -# CONFIG_NET_DMA is not set -CONFIG_STAGING=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_CRC_T10DIF=y -CONFIG_FRAME_WARN=8092 -CONFIG_DEBUG_FS=y -CONFIG_DETECT_HUNG_TASK=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -CONFIG_STRICT_DEVMEM=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_FSL_CAAM=y diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 69128740c14d..15b1ff5d96e7 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -70,3 +70,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 219fd470ed22..b8a79d7ee89f 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -72,3 +72,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index d2e0fab5ee5b..83d3550fdb54 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -31,6 +31,7 @@ CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y +CONFIG_P1023_RDB=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y @@ -113,6 +114,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -211,6 +213,7 @@ CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 4cb7b59e98bd..4b686294feb4 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -34,6 +34,7 @@ CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y +CONFIG_P1023_RDB=y CONFIG_P1023_RDS=y CONFIG_SOCRATES=y CONFIG_KSI8560=y @@ -116,6 +117,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -212,6 +214,7 @@ CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 5c258823e694..d954e80c286a 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -55,3 +55,4 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_CCITT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 9e146cdf63de..3f47d00a10c0 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -78,3 +78,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig new file mode 100644 index 000000000000..93c7752e2dbb --- /dev/null +++ b/arch/powerpc/configs/mvme5100_defconfig @@ -0,0 +1,144 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_PPC_CHRP is not set +# CONFIG_PPC_PMAC is not set +CONFIG_EMBEDDED6xx=y +CONFIG_MVME5100=y +CONFIG_KVM_GUEST=y +CONFIG_HZ_100=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPACTION is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_LAPB=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_EEPROM_LEGACY=m +CONFIG_NETDEVICES=y +CONFIG_TUN=m +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_E100=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=10 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MPC=y +# CONFIG_HWMON is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_VME_BUS=m +CONFIG_VME_CA91CX42=m +CONFIG_EXT2_FS=m +CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_XFS_FS=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +CONFIG_CIFS=m +CONFIG_NLS=y +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_UTF8=m +CONFIG_CRC_CCITT=m +CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20 +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/tqm8xx_defconfig b/arch/powerpc/configs/tqm8xx_defconfig index 8616fde0896f..4b6f8bf104e0 100644 --- a/arch/powerpc/configs/tqm8xx_defconfig +++ b/arch/powerpc/configs/tqm8xx_defconfig @@ -84,3 +84,4 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_CRC32_SLICEBY4=y diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 420b45368fcf..067fb0dca549 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -285,7 +285,7 @@ struct fsl_lbc_ctrl { /* device info */ struct device *dev; struct fsl_lbc_regs __iomem *regs; - int irq; + int irq[2]; wait_queue_head_t irq_wait; spinlock_t lock; void *nand; diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index 1bd92fd43cfb..1503d8c7c41b 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -74,6 +74,7 @@ #define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39 #define BOOKE_INTERRUPT_HV_SYSCALL 40 #define BOOKE_INTERRUPT_HV_PRIV 41 +#define BOOKE_INTERRUPT_LRAT_ERROR 42 /* book3s */ diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 936db360790a..89b785d16846 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -286,8 +286,21 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) extern int mmu_linear_psize; extern int mmu_vmemmap_psize; +struct tlb_core_data { + /* For software way selection, as on Freescale TLB1 */ + u8 esel_next, esel_max, esel_first; + + /* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */ + u8 lock; +}; + #ifdef CONFIG_PPC64 extern unsigned long linear_map_top; +extern int book3e_htw_mode; + +#define PPC_HTW_NONE 0 +#define PPC_HTW_IBM 1 +#define PPC_HTW_E6500 2 /* * 64-bit booke platforms don't load the tlb in the tlb miss handler code. diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h index 691fd8aca939..f8d1d6dcf7db 100644 --- a/arch/powerpc/include/asm/mmu.h +++ b/arch/powerpc/include/asm/mmu.h @@ -180,16 +180,17 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) #define MMU_PAGE_64K_AP 3 /* "Admixed pages" (hash64 only) */ #define MMU_PAGE_256K 4 #define MMU_PAGE_1M 5 -#define MMU_PAGE_4M 6 -#define MMU_PAGE_8M 7 -#define MMU_PAGE_16M 8 -#define MMU_PAGE_64M 9 -#define MMU_PAGE_256M 10 -#define MMU_PAGE_1G 11 -#define MMU_PAGE_16G 12 -#define MMU_PAGE_64G 13 +#define MMU_PAGE_2M 6 +#define MMU_PAGE_4M 7 +#define MMU_PAGE_8M 8 +#define MMU_PAGE_16M 9 +#define MMU_PAGE_64M 10 +#define MMU_PAGE_256M 11 +#define MMU_PAGE_1G 12 +#define MMU_PAGE_16G 13 +#define MMU_PAGE_64G 14 -#define MMU_PAGE_COUNT 14 +#define MMU_PAGE_COUNT 15 #if defined(CONFIG_PPC_STD_MMU_64) /* 64-bit classic hash table MMU */ diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 68bee4636045..9c5dbc3833fb 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -112,6 +112,10 @@ struct paca_struct { /* Keep pgd in the same cacheline as the start of extlb */ pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */ pgd_t *kernel_pgd; /* Kernel PGD */ + + /* Shared by all threads of a core -- points to tcd of first thread */ + struct tlb_core_data *tcd_ptr; + /* We can have up to 3 levels of reentrancy in the TLB miss handler */ u64 extlb[3][EX_TLB_SIZE / sizeof(u64)]; u64 exmc[8]; /* used for machine checks */ @@ -122,6 +126,8 @@ struct paca_struct { void *mc_kstack; void *crit_kstack; void *dbg_kstack; + + struct tlb_core_data tcd; #endif /* CONFIG_PPC_BOOK3E */ mm_context_t context; diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 7689e0e98d33..6586a40a46ce 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -294,6 +294,11 @@ n: * you want to access various offsets within it). On ppc32 this is * identical to LOAD_REG_IMMEDIATE. * + * LOAD_REG_ADDR_PIC(rn, name) + * Loads the address of label 'name' into register 'run'. Use this when + * the kernel doesn't run at the linked or relocated address. Please + * note that this macro will clobber the lr register. + * * LOAD_REG_ADDRBASE(rn, name) * ADDROFF(name) * LOAD_REG_ADDRBASE loads part of the address of label 'name' into @@ -304,6 +309,14 @@ n: * LOAD_REG_ADDRBASE(rX, name) * ld rY,ADDROFF(name)(rX) */ + +/* Be careful, this will clobber the lr register. */ +#define LOAD_REG_ADDR_PIC(reg, name) \ + bl 0f; \ +0: mflr reg; \ + addis reg,reg,(name - 0b)@ha; \ + addi reg,reg,(name - 0b)@l; + #ifdef __powerpc64__ #define LOAD_REG_IMMEDIATE(reg,expr) \ lis reg,(expr)@highest; \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 232a2fa5b483..8ca20ac28dc2 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -256,6 +256,8 @@ struct thread_struct { unsigned long evr[32]; /* upper 32-bits of SPE regs */ u64 acc; /* Accumulator */ unsigned long spefscr; /* SPE & eFP status */ + unsigned long spefscr_last; /* SPEFSCR value on last prctl + call or trap return */ int used_spe; /* set if process has used spe */ #endif /* CONFIG_SPE */ #ifdef CONFIG_PPC_TRANSACTIONAL_MEM @@ -317,7 +319,9 @@ struct thread_struct { (_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack) #ifdef CONFIG_SPE -#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, +#define SPEFSCR_INIT \ + .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \ + .spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, #else #define SPEFSCR_INIT #endif diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index fa8388ed94c5..62b114e079cf 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1075,6 +1075,8 @@ #define PVR_8560 0x80200000 #define PVR_VER_E500V1 0x8020 #define PVR_VER_E500V2 0x8021 +#define PVR_VER_E6500 0x8040 + /* * For the 8xx processors, all of them report the same PVR family for * the PowerPC core. The various versions of these processors must be diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 2e31aacd8acc..163c3b05a76e 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -101,6 +101,7 @@ #define SPRN_IVOR39 0x1B1 /* Interrupt Vector Offset Register 39 */ #define SPRN_IVOR40 0x1B2 /* Interrupt Vector Offset Register 40 */ #define SPRN_IVOR41 0x1B3 /* Interrupt Vector Offset Register 41 */ +#define SPRN_IVOR42 0x1B4 /* Interrupt Vector Offset Register 42 */ #define SPRN_GIVOR2 0x1B8 /* Guest IVOR2 */ #define SPRN_GIVOR3 0x1B9 /* Guest IVOR3 */ #define SPRN_GIVOR4 0x1BA /* Guest IVOR4 */ @@ -170,6 +171,7 @@ #define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ +#define SPRN_PWRMGTCR0 0x3FB /* Power management control register 0 */ #define SPRN_SVR 0x3FF /* System Version Register */ /* @@ -216,6 +218,14 @@ #define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ +/* Bit definitions for PWRMGTCR0. */ +#define PWRMGTCR0_PW20_WAIT (1 << 14) /* PW20 state enable bit */ +#define PWRMGTCR0_PW20_ENT_SHIFT 8 +#define PWRMGTCR0_PW20_ENT 0x3F00 +#define PWRMGTCR0_AV_IDLE_PD_EN (1 << 22) /* Altivec idle enable */ +#define PWRMGTCR0_AV_IDLE_CNT_SHIFT 16 +#define PWRMGTCR0_AV_IDLE_CNT 0x3F0000 + /* Bit definitions for the MCSR. */ #define MCSR_MCS 0x80000000 /* Machine Check Summary */ #define MCSR_IB 0x40000000 /* Instruction PLB Error */ diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 41a283956a29..ed8d68ce71f3 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -203,6 +203,15 @@ int main(void) DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack)); DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack)); DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack)); + DEFINE(PACA_TCD_PTR, offsetof(struct paca_struct, tcd_ptr)); + + DEFINE(TCD_ESEL_NEXT, + offsetof(struct tlb_core_data, esel_next)); + DEFINE(TCD_ESEL_MAX, + offsetof(struct tlb_core_data, esel_max)); + DEFINE(TCD_ESEL_FIRST, + offsetof(struct tlb_core_data, esel_first)); + DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock)); #endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PPC_STD_MMU_64 diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index bfb18c7290b7..cc2d8962e090 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -53,11 +53,57 @@ _GLOBAL(__e500_dcache_setup) isync blr +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for PW20_WAIT_IDLE_BIT. + */ +#define PW20_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_pw20_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Set PW20_WAIT bit, enable pw20 state*/ + ori r3, r3, PWRMGTCR0_PW20_WAIT + li r11, PW20_WAIT_IDLE_BIT + + /* Set Automatic PW20 Core Idle Count */ + rlwimi r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + +/* + * FIXME - we haven't yet done testing to determine a reasonable default + * value for AV_WAIT_IDLE_BIT. + */ +#define AV_WAIT_IDLE_BIT 50 /* 1ms, TB frequency is 41.66MHZ */ +_GLOBAL(setup_altivec_idle) + mfspr r3, SPRN_PWRMGTCR0 + + /* Enable Altivec Idle */ + oris r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h + li r11, AV_WAIT_IDLE_BIT + + /* Set Automatic AltiVec Idle Count */ + rlwimi r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT + + mtspr SPRN_PWRMGTCR0, r3 + + blr + _GLOBAL(__setup_cpu_e6500) mflr r6 #ifdef CONFIG_PPC64 bl .setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl .setup_lrat_ivor +1: #endif + bl setup_pw20_idle + bl setup_altivec_idle bl __setup_cpu_e5500 mtlr r6 blr @@ -119,6 +165,14 @@ _GLOBAL(__setup_cpu_e5500) _GLOBAL(__restore_cpu_e6500) mflr r5 bl .setup_altivec_ivors + /* Touch IVOR42 only if the CPU supports E.HV category */ + mfspr r10,SPRN_MMUCFG + rlwinm. r10,r10,0,MMUCFG_LPIDSIZE + beq 1f + bl .setup_lrat_ivor +1: + bl .setup_pw20_idle + bl .setup_altivec_idle bl __restore_cpu_e5500 mtlr r5 blr diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index e7751561fd1d..063b65dd4f27 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -308,6 +308,7 @@ interrupt_base_book3e: /* fake trap */ EXCEPTION_STUB(0x2e0, guest_doorbell_crit) EXCEPTION_STUB(0x300, hypercall) EXCEPTION_STUB(0x320, ehpriv) + EXCEPTION_STUB(0x340, lrat_error) .globl interrupt_end_book3e interrupt_end_book3e: @@ -677,6 +678,17 @@ kernel_dbg_exc: bl .unknown_exception b .ret_from_except +/* LRAT Error interrupt */ + START_EXCEPTION(lrat_error); + NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR, + PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x340, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + /* * An interrupt came in while soft-disabled; We mark paca->irq_happened * accordingly and if the interrupt is level sensitive, we hard disable @@ -859,6 +871,7 @@ BAD_STACK_TRAMPOLINE(0x2e0) BAD_STACK_TRAMPOLINE(0x300) BAD_STACK_TRAMPOLINE(0x310) BAD_STACK_TRAMPOLINE(0x320) +BAD_STACK_TRAMPOLINE(0x340) BAD_STACK_TRAMPOLINE(0x400) BAD_STACK_TRAMPOLINE(0x500) BAD_STACK_TRAMPOLINE(0x600) @@ -1055,12 +1068,9 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r3 tlbre mfspr r6,SPRN_MAS1 - rlwinm r6,r6,0,2,0 /* clear IPROT */ + rlwinm r6,r6,0,2,31 /* clear IPROT and VALID */ mtspr SPRN_MAS1,r6 tlbwe - - /* Invalidate TLB1 */ - PPC_TLBILX_ALL(0,R0) sync isync @@ -1114,12 +1124,9 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_MAS0,r4 tlbre mfspr r5,SPRN_MAS1 - rlwinm r5,r5,0,2,0 /* clear IPROT */ + rlwinm r5,r5,0,2,31 /* clear IPROT and VALID */ mtspr SPRN_MAS1,r5 tlbwe - - /* Invalidate TLB1 */ - PPC_TLBILX_ALL(0,R0) sync isync @@ -1414,3 +1421,7 @@ _GLOBAL(setup_ehv_ivors) SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */ SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */ blr + +_GLOBAL(setup_lrat_ivor) + SET_IVOR(42, 0x340) /* LRAT Error */ + blr diff --git a/arch/powerpc/kernel/fsl_booke_entry_mapping.S b/arch/powerpc/kernel/fsl_booke_entry_mapping.S index a92c79be2728..f22e7e44fbf3 100644 --- a/arch/powerpc/kernel/fsl_booke_entry_mapping.S +++ b/arch/powerpc/kernel/fsl_booke_entry_mapping.S @@ -176,6 +176,8 @@ skpinv: addi r6,r6,1 /* Increment */ /* 7. Jump to KERNELBASE mapping */ lis r6,(KERNELBASE & ~0xfff)@h ori r6,r6,(KERNELBASE & ~0xfff)@l + rlwinm r7,r25,0,0x03ffffff + add r6,r7,r6 #elif defined(ENTRY_MAPPING_KEXEC_SETUP) /* diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index f45726a1d963..b497188a94a1 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -65,29 +65,78 @@ _ENTRY(_start); nop /* Translate device tree address to physical, save in r30/r31 */ - mfmsr r16 - mfspr r17,SPRN_PID - rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */ - rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ - mtspr SPRN_MAS6,r17 - - tlbsx 0,r3 /* must succeed */ - - mfspr r16,SPRN_MAS1 - mfspr r20,SPRN_MAS3 - rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */ - li r18,1024 - slw r18,r18,r17 /* r18 = page size */ - addi r18,r18,-1 - and r19,r3,r18 /* r19 = page offset */ - andc r31,r20,r18 /* r31 = page base */ - or r31,r31,r19 /* r31 = devtree phys addr */ - mfspr r30,SPRN_MAS7 + bl get_phys_addr + mr r30,r3 + mr r31,r4 li r25,0 /* phys kernel start (low) */ li r24,0 /* CPU number */ li r23,0 /* phys kernel start (high) */ +#ifdef CONFIG_RELOCATABLE + LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */ + + /* Translate _stext address to physical, save in r23/r25 */ + bl get_phys_addr + mr r23,r3 + mr r25,r4 + + bl 0f +0: mflr r8 + addis r3,r8,(is_second_reloc - 0b)@ha + lwz r19,(is_second_reloc - 0b)@l(r3) + + /* Check if this is the second relocation. */ + cmpwi r19,1 + bne 1f + + /* + * For the second relocation, we already get the real memstart_addr + * from device tree. So we will map PAGE_OFFSET to memstart_addr, + * then the virtual address of start kernel should be: + * PAGE_OFFSET + (kernstart_addr - memstart_addr) + * Since the offset between kernstart_addr and memstart_addr should + * never be beyond 1G, so we can just use the lower 32bit of them + * for the calculation. + */ + lis r3,PAGE_OFFSET@h + + addis r4,r8,(kernstart_addr - 0b)@ha + addi r4,r4,(kernstart_addr - 0b)@l + lwz r5,4(r4) + + addis r6,r8,(memstart_addr - 0b)@ha + addi r6,r6,(memstart_addr - 0b)@l + lwz r7,4(r6) + + subf r5,r7,r5 + add r3,r3,r5 + b 2f + +1: + /* + * We have the runtime (virutal) address of our base. + * We calculate our shift of offset from a 64M page. + * We could map the 64M page we belong to at PAGE_OFFSET and + * get going from there. + */ + lis r4,KERNELBASE@h + ori r4,r4,KERNELBASE@l + rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */ + rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */ + subf r3,r5,r6 /* r3 = r6 - r5 */ + add r3,r4,r3 /* Required Virtual Address */ + +2: bl relocate + + /* + * For the second relocation, we already set the right tlb entries + * for the kernel space, so skip the code in fsl_booke_entry_mapping.S + */ + cmpwi r19,1 + beq set_ivor +#endif + /* We try to not make any assumptions about how the boot loader * setup or used the TLBs. We invalidate all mappings from the * boot loader and load a single entry in TLB1[0] to map the @@ -113,6 +162,7 @@ _ENTRY(__early_start) #include "fsl_booke_entry_mapping.S" #undef ENTRY_MAPPING_BOOT_SETUP +set_ivor: /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheck); @@ -166,8 +216,7 @@ _ENTRY(__early_start) /* Check to see if we're the second processor, and jump * to the secondary_start code if so */ - lis r24, boot_cpuid@h - ori r24, r24, boot_cpuid@l + LOAD_REG_ADDR_PIC(r24, boot_cpuid) lwz r24, 0(r24) cmpwi r24, -1 mfspr r24,SPRN_PIR @@ -197,6 +246,18 @@ _ENTRY(__early_start) bl early_init +#ifdef CONFIG_RELOCATABLE + mr r3,r30 + mr r4,r31 +#ifdef CONFIG_PHYS_64BIT + mr r5,r23 + mr r6,r25 +#else + mr r5,r25 +#endif + bl relocate_init +#endif + #ifdef CONFIG_DYNAMIC_MEMSTART lis r3,kernstart_addr@ha la r3,kernstart_addr@l(r3) @@ -855,6 +916,33 @@ KernelSPE: #endif /* CONFIG_SPE */ +/* + * Translate the effec addr in r3 to phys addr. The phys addr will be put + * into r3(higher 32bit) and r4(lower 32bit) + */ +get_phys_addr: + mfmsr r8 + mfspr r9,SPRN_PID + rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */ + mtspr SPRN_MAS6,r9 + + tlbsx 0,r3 /* must succeed */ + + mfspr r8,SPRN_MAS1 + mfspr r12,SPRN_MAS3 + rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */ + li r10,1024 + slw r10,r10,r9 /* r10 = page size */ + addi r10,r10,-1 + and r11,r3,r10 /* r11 = page offset */ + andc r4,r12,r10 /* r4 = page base */ + or r4,r4,r11 /* r4 = devtree phys addr */ +#ifdef CONFIG_PHYS_64BIT + mfspr r3,SPRN_MAS7 +#endif + blr + /* * Global functions */ @@ -1057,6 +1145,29 @@ _GLOBAL(__flush_disable_L1) /* When we get here, r24 needs to hold the CPU # */ .globl __secondary_start __secondary_start: + LOAD_REG_ADDR_PIC(r3, tlbcam_index) + lwz r3,0(r3) + mtctr r3 + li r26,0 /* r26 safe? */ + + bl switch_to_as1 + mr r27,r3 /* tlb entry */ + /* Load each CAM entry */ +1: mr r3,r26 + bl loadcam_entry + addi r26,r26,1 + bdnz 1b + mr r3,r27 /* tlb entry */ + LOAD_REG_ADDR_PIC(r4, memstart_addr) + lwz r4,0(r4) + mr r5,r25 /* phys kernel start */ + rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */ + subf r4,r5,r4 /* memstart_addr - phys kernel start */ + li r5,0 /* no device tree */ + li r6,0 /* not boot cpu */ + bl restore_to_as0 + + lis r3,__secondary_hold_acknowledge@h ori r3,r3,__secondary_hold_acknowledge@l stw r24,0(r3) @@ -1065,17 +1176,6 @@ __secondary_start: mr r4,r24 /* Why? */ bl call_setup_cpu - lis r3,tlbcam_index@ha - lwz r3,tlbcam_index@l(r3) - mtctr r3 - li r26,0 /* r26 safe? */ - - /* Load each CAM entry */ -1: mr r3,r26 - bl loadcam_entry - addi r26,r26,1 - bdnz 1b - /* get current_thread_info and current */ lis r1,secondary_ti@ha lwz r1,secondary_ti@l(r1) @@ -1110,6 +1210,112 @@ __secondary_hold_acknowledge: .long -1 #endif +/* + * Create a tlb entry with the same effective and physical address as + * the tlb entry used by the current running code. But set the TS to 1. + * Then switch to the address space 1. It will return with the r3 set to + * the ESEL of the new created tlb. + */ +_GLOBAL(switch_to_as1) + mflr r5 + + /* Find a entry not used */ + mfspr r3,SPRN_TLB1CFG + andi. r3,r3,0xfff + mfspr r4,SPRN_PID + rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */ + mtspr SPRN_MAS6,r4 +1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */ + addi r3,r3,-1 + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbre + mfspr r4,SPRN_MAS1 + andis. r4,r4,MAS1_VALID@h + bne 1b + + /* Get the tlb entry used by the current running code */ + bl 0f +0: mflr r4 + tlbsx 0,r4 + + mfspr r4,SPRN_MAS1 + ori r4,r4,MAS1_TS /* Set the TS = 1 */ + mtspr SPRN_MAS1,r4 + + mfspr r4,SPRN_MAS0 + rlwinm r4,r4,0,~MAS0_ESEL_MASK + rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r4 + tlbwe + isync + sync + + mfmsr r4 + ori r4,r4,MSR_IS | MSR_DS + mtspr SPRN_SRR0,r5 + mtspr SPRN_SRR1,r4 + sync + rfi + +/* + * Restore to the address space 0 and also invalidate the tlb entry created + * by switch_to_as1. + * r3 - the tlb entry which should be invalidated + * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0) + * r5 - device tree virtual address. If r4 is 0, r5 is ignored. + * r6 - boot cpu +*/ +_GLOBAL(restore_to_as0) + mflr r0 + + bl 0f +0: mflr r9 + addi r9,r9,1f - 0b + + /* + * We may map the PAGE_OFFSET in AS0 to a different physical address, + * so we need calculate the right jump and device tree address based + * on the offset passed by r4. + */ + add r9,r9,r4 + add r5,r5,r4 + add r0,r0,r4 + +2: mfmsr r7 + li r8,(MSR_IS | MSR_DS) + andc r7,r7,r8 + + mtspr SPRN_SRR0,r9 + mtspr SPRN_SRR1,r7 + sync + rfi + + /* Invalidate the temporary tlb entry for AS1 */ +1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */ + rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ + mtspr SPRN_MAS0,r9 + tlbre + mfspr r9,SPRN_MAS1 + rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */ + mtspr SPRN_MAS1,r9 + tlbwe + isync + + cmpwi r4,0 + cmpwi cr1,r6,0 + cror eq,4*cr1+eq,eq + bne 3f /* offset != 0 && is_boot_cpu */ + mtlr r0 + blr + + /* + * The PAGE_OFFSET will map to a different physical address, + * jump to _start to do another relocation again. + */ +3: mr r3,r5 + bl _start + /* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 623c356fe34f..bf0aada02fe4 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -160,6 +160,11 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu) #ifdef CONFIG_PPC_STD_MMU_64 new_paca->slb_shadow_ptr = init_slb_shadow(cpu); #endif /* CONFIG_PPC_STD_MMU_64 */ + +#ifdef CONFIG_PPC_BOOK3E + /* For now -- if we have threads this will be adjusted later */ + new_paca->tcd_ptr = &new_paca->tcd; +#endif } /* Put the paca pointer into r13 and SPRG_PACA */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 3573d186505f..5fc5906ec337 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1296,6 +1296,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val) if (val & PR_FP_EXC_SW_ENABLE) { #ifdef CONFIG_SPE if (cpu_has_feature(CPU_FTR_SPE)) { + /* + * When the sticky exception bits are set + * directly by userspace, it must call prctl + * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE + * in the existing prctl settings) or + * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in + * the bits being set). functions + * saving and restoring the whole + * floating-point environment need to do so + * anyway to restore the prctl settings from + * the saved environment. + */ + tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); tsk->thread.fpexc_mode = val & (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT); return 0; @@ -1327,9 +1340,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr) if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) #ifdef CONFIG_SPE - if (cpu_has_feature(CPU_FTR_SPE)) + if (cpu_has_feature(CPU_FTR_SPE)) { + /* + * When the sticky exception bits are set + * directly by userspace, it must call prctl + * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE + * in the existing prctl settings) or + * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in + * the bits being set). functions + * saving and restoring the whole + * floating-point environment need to do so + * anyway to restore the prctl settings from + * the saved environment. + */ + tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); val = tsk->thread.fpexc_mode; - else + } else return -EINVAL; #else return -EINVAL; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index fa0ad8aafbcc..f58c0d3aaeb4 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -523,6 +523,20 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node, return early_init_dt_scan_memory(node, uname, depth, data); } +/* + * For a relocatable kernel, we need to get the memstart_addr first, + * then use it to calculate the virtual kernel start address. This has + * to happen at a very early stage (before machine_init). In this case, + * we just want to get the memstart_address and would not like to mess the + * memblock at this stage. So introduce a variable to skip the memblock_add() + * for this reason. + */ +#ifdef CONFIG_RELOCATABLE +static int add_mem_to_memblock = 1; +#else +#define add_mem_to_memblock 1 +#endif + void __init early_init_dt_add_memory_arch(u64 base, u64 size) { #ifdef CONFIG_PPC64 @@ -543,7 +557,8 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) } /* Add the chunk to the MEMBLOCK list */ - memblock_add(base, size); + if (add_mem_to_memblock) + memblock_add(base, size); } static void __init early_reserve_mem_dt(void) @@ -740,6 +755,30 @@ void __init early_init_devtree(void *params) DBG(" <- early_init_devtree()\n"); } +#ifdef CONFIG_RELOCATABLE +/* + * This function run before early_init_devtree, so we have to init + * initial_boot_params. + */ +void __init early_get_first_memblock_info(void *params, phys_addr_t *size) +{ + /* Setup flat device-tree pointer */ + initial_boot_params = params; + + /* + * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid + * mess the memblock. + */ + add_mem_to_memblock = 0; + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL); + add_mem_to_memblock = 1; + + if (size) + *size = first_memblock_size; +} +#endif + /******* * * New implementation of the OF "find" APIs, return a refcounted diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 2232aff66059..1ce9b87d7df8 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -97,6 +97,36 @@ int dcache_bsize; int icache_bsize; int ucache_bsize; +#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP) +static void setup_tlb_core_data(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + int first = cpu_first_thread_sibling(cpu); + + paca[cpu].tcd_ptr = &paca[first].tcd; + + /* + * If we have threads, we need either tlbsrx. + * or e6500 tablewalk mode, or else TLB handlers + * will be racy and could produce duplicate entries. + */ + if (smt_enabled_at_boot >= 2 && + !mmu_has_feature(MMU_FTR_USE_TLBRSRV) && + book3e_htw_mode != PPC_HTW_E6500) { + /* Should we panic instead? */ + WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n", + __func__); + } + } +} +#else +static void setup_tlb_core_data(void) +{ +} +#endif + #ifdef CONFIG_SMP static char *smt_enabled_cmdline; @@ -445,6 +475,7 @@ void __init setup_system(void) smp_setup_cpu_maps(); check_smt_enabled(); + setup_tlb_core_data(); #ifdef CONFIG_SMP /* Release secondary cpus out of their spinloops at 0x60 now that diff --git a/arch/powerpc/kernel/swsusp_booke.S b/arch/powerpc/kernel/swsusp_booke.S index 0f204053e5b5..553c1405ee05 100644 --- a/arch/powerpc/kernel/swsusp_booke.S +++ b/arch/powerpc/kernel/swsusp_booke.S @@ -74,21 +74,21 @@ _GLOBAL(swsusp_arch_suspend) bne 1b /* Save SPRGs */ - mfsprg r4,0 + mfspr r4,SPRN_SPRG0 stw r4,SL_SPRG0(r11) - mfsprg r4,1 + mfspr r4,SPRN_SPRG1 stw r4,SL_SPRG1(r11) - mfsprg r4,2 + mfspr r4,SPRN_SPRG2 stw r4,SL_SPRG2(r11) - mfsprg r4,3 + mfspr r4,SPRN_SPRG3 stw r4,SL_SPRG3(r11) - mfsprg r4,4 + mfspr r4,SPRN_SPRG4 stw r4,SL_SPRG4(r11) - mfsprg r4,5 + mfspr r4,SPRN_SPRG5 stw r4,SL_SPRG5(r11) - mfsprg r4,6 + mfspr r4,SPRN_SPRG6 stw r4,SL_SPRG6(r11) - mfsprg r4,7 + mfspr r4,SPRN_SPRG7 stw r4,SL_SPRG7(r11) /* Call the low level suspend stuff (we should probably have made @@ -150,21 +150,21 @@ _GLOBAL(swsusp_arch_resume) bl _tlbil_all lwz r4,SL_SPRG0(r11) - mtsprg 0,r4 + mtspr SPRN_SPRG0,r4 lwz r4,SL_SPRG1(r11) - mtsprg 1,r4 + mtspr SPRN_SPRG1,r4 lwz r4,SL_SPRG2(r11) - mtsprg 2,r4 + mtspr SPRN_SPRG2,r4 lwz r4,SL_SPRG3(r11) - mtsprg 3,r4 + mtspr SPRN_SPRG3,r4 lwz r4,SL_SPRG4(r11) - mtsprg 4,r4 + mtspr SPRN_SPRG4,r4 lwz r4,SL_SPRG5(r11) - mtsprg 5,r4 + mtspr SPRN_SPRG5,r4 lwz r4,SL_SPRG6(r11) - mtsprg 6,r4 + mtspr SPRN_SPRG6,r4 lwz r4,SL_SPRG7(r11) - mtsprg 7,r4 + mtspr SPRN_SPRG7,r4 /* restore the MSR */ lwz r3,SL_MSR(r11) diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index cad777eb613a..d4a43e64a6a9 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -86,6 +86,304 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E +#define MAX_BIT 63 + +static u64 pw20_wt; +static u64 altivec_idle_wt; + +static unsigned int get_idle_ticks_bit(u64 ns) +{ + u64 cycle; + + if (ns >= 10000) + cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec; + else + cycle = div_u64(ns * tb_ticks_per_usec, 1000); + + if (!cycle) + return 0; + + return ilog2(cycle); +} + +static void do_show_pwrmgtcr0(void *val) +{ + u32 *value = val; + + *value = mfspr(SPRN_PWRMGTCR0); +} + +static ssize_t show_pw20_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + unsigned int cpu = dev->id; + + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + + value &= PWRMGTCR0_PW20_WAIT; + + return sprintf(buf, "%u\n", value ? 1 : 0); +} + +static void do_store_pw20_state(void *val) +{ + u32 *value = val; + u32 pw20_state; + + pw20_state = mfspr(SPRN_PWRMGTCR0); + + if (*value) + pw20_state |= PWRMGTCR0_PW20_WAIT; + else + pw20_state &= ~PWRMGTCR0_PW20_WAIT; + + mtspr(SPRN_PWRMGTCR0, pw20_state); +} + +static ssize_t store_pw20_state(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 value; + unsigned int cpu = dev->id; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + if (value > 1) + return -EINVAL; + + smp_call_function_single(cpu, do_store_pw20_state, &value, 1); + + return count; +} + +static ssize_t show_pw20_wait_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + u64 tb_cycle = 1; + u64 time; + + unsigned int cpu = dev->id; + + if (!pw20_wt) { + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + value = (value & PWRMGTCR0_PW20_ENT) >> + PWRMGTCR0_PW20_ENT_SHIFT; + + tb_cycle = (tb_cycle << (MAX_BIT - value + 1)); + /* convert ms to ns */ + if (tb_ticks_per_usec > 1000) { + time = div_u64(tb_cycle, tb_ticks_per_usec / 1000); + } else { + u32 rem_us; + + time = div_u64_rem(tb_cycle, tb_ticks_per_usec, + &rem_us); + time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec; + } + } else { + time = pw20_wt; + } + + return sprintf(buf, "%llu\n", time > 0 ? time : 0); +} + +static void set_pw20_wait_entry_bit(void *val) +{ + u32 *value = val; + u32 pw20_idle; + + pw20_idle = mfspr(SPRN_PWRMGTCR0); + + /* Set Automatic PW20 Core Idle Count */ + /* clear count */ + pw20_idle &= ~PWRMGTCR0_PW20_ENT; + + /* set count */ + pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT); + + mtspr(SPRN_PWRMGTCR0, pw20_idle); +} + +static ssize_t store_pw20_wait_time(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 entry_bit; + u64 value; + + unsigned int cpu = dev->id; + + if (kstrtou64(buf, 0, &value)) + return -EINVAL; + + if (!value) + return -EINVAL; + + entry_bit = get_idle_ticks_bit(value); + if (entry_bit > MAX_BIT) + return -EINVAL; + + pw20_wt = value; + + smp_call_function_single(cpu, set_pw20_wait_entry_bit, + &entry_bit, 1); + + return count; +} + +static ssize_t show_altivec_idle(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + unsigned int cpu = dev->id; + + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + + value &= PWRMGTCR0_AV_IDLE_PD_EN; + + return sprintf(buf, "%u\n", value ? 1 : 0); +} + +static void do_store_altivec_idle(void *val) +{ + u32 *value = val; + u32 altivec_idle; + + altivec_idle = mfspr(SPRN_PWRMGTCR0); + + if (*value) + altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN; + else + altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN; + + mtspr(SPRN_PWRMGTCR0, altivec_idle); +} + +static ssize_t store_altivec_idle(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 value; + unsigned int cpu = dev->id; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + if (value > 1) + return -EINVAL; + + smp_call_function_single(cpu, do_store_altivec_idle, &value, 1); + + return count; +} + +static ssize_t show_altivec_idle_wait_time(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 value; + u64 tb_cycle = 1; + u64 time; + + unsigned int cpu = dev->id; + + if (!altivec_idle_wt) { + smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1); + value = (value & PWRMGTCR0_AV_IDLE_CNT) >> + PWRMGTCR0_AV_IDLE_CNT_SHIFT; + + tb_cycle = (tb_cycle << (MAX_BIT - value + 1)); + /* convert ms to ns */ + if (tb_ticks_per_usec > 1000) { + time = div_u64(tb_cycle, tb_ticks_per_usec / 1000); + } else { + u32 rem_us; + + time = div_u64_rem(tb_cycle, tb_ticks_per_usec, + &rem_us); + time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec; + } + } else { + time = altivec_idle_wt; + } + + return sprintf(buf, "%llu\n", time > 0 ? time : 0); +} + +static void set_altivec_idle_wait_entry_bit(void *val) +{ + u32 *value = val; + u32 altivec_idle; + + altivec_idle = mfspr(SPRN_PWRMGTCR0); + + /* Set Automatic AltiVec Idle Count */ + /* clear count */ + altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT; + + /* set count */ + altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT); + + mtspr(SPRN_PWRMGTCR0, altivec_idle); +} + +static ssize_t store_altivec_idle_wait_time(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + u32 entry_bit; + u64 value; + + unsigned int cpu = dev->id; + + if (kstrtou64(buf, 0, &value)) + return -EINVAL; + + if (!value) + return -EINVAL; + + entry_bit = get_idle_ticks_bit(value); + if (entry_bit > MAX_BIT) + return -EINVAL; + + altivec_idle_wt = value; + + smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit, + &entry_bit, 1); + + return count; +} + +/* + * Enable/Disable interface: + * 0, disable. 1, enable. + */ +static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state); +static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle); + +/* + * Set wait time interface:(Nanosecond) + * Example: Base on TBfreq is 41MHZ. + * 1~48(ns): TB[63] + * 49~97(ns): TB[62] + * 98~195(ns): TB[61] + * 196~390(ns): TB[60] + * 391~780(ns): TB[59] + * 781~1560(ns): TB[58] + * ... + */ +static DEVICE_ATTR(pw20_wait_time, 0600, + show_pw20_wait_time, + store_pw20_wait_time); +static DEVICE_ATTR(altivec_idle_wait_time, 0600, + show_altivec_idle_wait_time, + store_altivec_idle_wait_time); +#endif + /* * Enabling PMCs will slow partition context switch times so we only do * it the first time we write to the PMCs. @@ -425,6 +723,15 @@ static void register_cpu_online(unsigned int cpu) device_create_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E + if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) { + device_create_file(s, &dev_attr_pw20_state); + device_create_file(s, &dev_attr_pw20_wait_time); + + device_create_file(s, &dev_attr_altivec_idle); + device_create_file(s, &dev_attr_altivec_idle_wait_time); + } +#endif cacheinfo_cpu_online(cpu); } @@ -497,6 +804,15 @@ static void unregister_cpu_online(unsigned int cpu) device_remove_file(s, &dev_attr_pir); #endif /* CONFIG_PPC64 */ +#ifdef CONFIG_PPC_FSL_BOOK3E + if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) { + device_remove_file(s, &dev_attr_pw20_state); + device_remove_file(s, &dev_attr_pw20_wait_time); + + device_remove_file(s, &dev_attr_altivec_idle); + device_remove_file(s, &dev_attr_altivec_idle_wait_time); + } +#endif cacheinfo_cpu_offline(cpu); } diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S index e8ed7d659c55..a0d6929d8678 100644 --- a/arch/powerpc/kvm/bookehv_interrupts.S +++ b/arch/powerpc/kvm/bookehv_interrupts.S @@ -319,6 +319,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \ SPRN_DSRR0, SPRN_DSRR1, 0 kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \ SPRN_CSRR0, SPRN_CSRR1, 0 +kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \ + SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR) #else /* * For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c index a73f0884d358..28337c9709ae 100644 --- a/arch/powerpc/math-emu/math_efp.c +++ b/arch/powerpc/math-emu/math_efp.c @@ -20,6 +20,7 @@ */ #include +#include #include #include @@ -275,21 +276,13 @@ int do_spe_mathemu(struct pt_regs *regs) case EFSCTSF: case EFSCTUF: - if (!((vb.wp[1] >> 23) == 0xff && ((vb.wp[1] & 0x7fffff) > 0))) { - /* NaN */ - if (((vb.wp[1] >> 23) & 0xff) == 0) { - /* denorm */ - vc.wp[1] = 0x0; - } else if ((vb.wp[1] >> 31) == 0) { - /* positive normal */ - vc.wp[1] = (func == EFSCTSF) ? - 0x7fffffff : 0xffffffff; - } else { /* negative normal */ - vc.wp[1] = (func == EFSCTSF) ? - 0x80000000 : 0x0; - } - } else { /* rB is NaN */ - vc.wp[1] = 0x0; + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB_e += (func == EFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[1], SB, 32, + (func == EFSCTSF)); } goto update_regs; @@ -306,16 +299,25 @@ int do_spe_mathemu(struct pt_regs *regs) } case EFSCTSI: - case EFSCTSIZ: case EFSCTUI: - case EFSCTUIZ: - if (func & 0x4) { - _FP_ROUND(1, SB); + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(1, SB); + FP_TO_INT_ROUND_S(vc.wp[1], SB, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + + case EFSCTSIZ: + case EFSCTUIZ: + if (SB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_S(vc.wp[1], SB, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_S(vc.wp[1], SB, 32, - (((func & 0x3) != 0) || SB_s)); goto update_regs; default: @@ -404,22 +406,13 @@ cmp_s: case EFDCTSF: case EFDCTUF: - if (!((vb.wp[0] >> 20) == 0x7ff && - ((vb.wp[0] & 0xfffff) > 0 || (vb.wp[1] > 0)))) { - /* not a NaN */ - if (((vb.wp[0] >> 20) & 0x7ff) == 0) { - /* denorm */ - vc.wp[1] = 0x0; - } else if ((vb.wp[0] >> 31) == 0) { - /* positive normal */ - vc.wp[1] = (func == EFDCTSF) ? - 0x7fffffff : 0xffffffff; - } else { /* negative normal */ - vc.wp[1] = (func == EFDCTSF) ? - 0x80000000 : 0x0; - } - } else { /* NaN */ - vc.wp[1] = 0x0; + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + DB_e += (func == EFDCTSF ? 31 : 32); + FP_TO_INT_ROUND_D(vc.wp[1], DB, 32, + (func == EFDCTSF)); } goto update_regs; @@ -437,21 +430,35 @@ cmp_s: case EFDCTUIDZ: case EFDCTSIDZ: - _FP_ROUND_ZERO(2, DB); - FP_TO_INT_D(vc.dp[0], DB, 64, ((func & 0x1) == 0)); + if (DB_c == FP_CLS_NAN) { + vc.dp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_D(vc.dp[0], DB, 64, + ((func & 0x1) == 0)); + } goto update_regs; case EFDCTUI: case EFDCTSI: + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_D(vc.wp[1], DB, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + case EFDCTUIZ: case EFDCTSIZ: - if (func & 0x4) { - _FP_ROUND(2, DB); + if (DB_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(2, DB); + FP_TO_INT_D(vc.wp[1], DB, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_D(vc.wp[1], DB, 32, - (((func & 0x3) != 0) || DB_s)); goto update_regs; default: @@ -556,37 +563,60 @@ cmp_d: cmp = -1; goto cmp_vs; - case EVFSCTSF: - __asm__ __volatile__ ("mtspr 512, %4\n" - "efsctsf %0, %2\n" - "efsctsf %1, %3\n" - : "=r" (vc.wp[0]), "=r" (vc.wp[1]) - : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0)); - goto update_regs; - case EVFSCTUF: - __asm__ __volatile__ ("mtspr 512, %4\n" - "efsctuf %0, %2\n" - "efsctuf %1, %3\n" - : "=r" (vc.wp[0]), "=r" (vc.wp[1]) - : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0)); + case EVFSCTSF: + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB0_e += (func == EVFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32, + (func == EVFSCTSF)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + SB1_e += (func == EVFSCTSF ? 31 : 32); + FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32, + (func == EVFSCTSF)); + } goto update_regs; case EVFSCTUI: case EVFSCTSI: + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_S(vc.wp[0], SB0, 32, + ((func & 0x3) != 0)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_ROUND_S(vc.wp[1], SB1, 32, + ((func & 0x3) != 0)); + } + goto update_regs; + case EVFSCTUIZ: case EVFSCTSIZ: - if (func & 0x4) { - _FP_ROUND(1, SB0); - _FP_ROUND(1, SB1); + if (SB0_c == FP_CLS_NAN) { + vc.wp[0] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); } else { - _FP_ROUND_ZERO(1, SB0); - _FP_ROUND_ZERO(1, SB1); + FP_TO_INT_S(vc.wp[0], SB0, 32, + ((func & 0x3) != 0)); + } + if (SB1_c == FP_CLS_NAN) { + vc.wp[1] = 0; + FP_SET_EXCEPTION(FP_EX_INVALID); + } else { + FP_TO_INT_S(vc.wp[1], SB1, 32, + ((func & 0x3) != 0)); } - FP_TO_INT_S(vc.wp[0], SB0, 32, - (((func & 0x3) != 0) || SB0_s)); - FP_TO_INT_S(vc.wp[1], SB1, 32, - (((func & 0x3) != 0) || SB1_s)); goto update_regs; default: @@ -630,9 +660,27 @@ update_ccr: regs->ccr |= (IR << ((7 - ((speinsn >> 23) & 0x7)) << 2)); update_regs: - __FPU_FPSCR &= ~FP_EX_MASK; + /* + * If the "invalid" exception sticky bit was set by the + * processor for non-finite input, but was not set before the + * instruction being emulated, clear it. Likewise for the + * "underflow" bit, which may have been set by the processor + * for exact underflow, not just inexact underflow when the + * flag should be set for IEEE 754 semantics. Other sticky + * exceptions will only be set by the processor when they are + * correct according to IEEE 754 semantics, and we must not + * clear sticky bits that were already set before the emulated + * instruction as they represent the user-visible sticky + * exception status. "inexact" traps to kernel are not + * required for IEEE semantics and are not enabled by default, + * so the "inexact" sticky bit may have been set by a previous + * instruction without the kernel being aware of it. + */ + __FPU_FPSCR + &= ~(FP_EX_INVALID | FP_EX_UNDERFLOW) | current->thread.spefscr_last; __FPU_FPSCR |= (FP_CUR_EXCEPTIONS & FP_EX_MASK); mtspr(SPRN_SPEFSCR, __FPU_FPSCR); + current->thread.spefscr_last = __FPU_FPSCR; current->thread.evr[fc] = vc.wp[0]; regs->gpr[fc] = vc.wp[1]; @@ -644,6 +692,23 @@ update_regs: pr_debug("va: %08x %08x\n", va.wp[0], va.wp[1]); pr_debug("vb: %08x %08x\n", vb.wp[0], vb.wp[1]); + if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) { + if ((FP_CUR_EXCEPTIONS & FP_EX_DIVZERO) + && (current->thread.fpexc_mode & PR_FP_EXC_DIV)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_OVERFLOW) + && (current->thread.fpexc_mode & PR_FP_EXC_OVF)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_UNDERFLOW) + && (current->thread.fpexc_mode & PR_FP_EXC_UND)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_INEXACT) + && (current->thread.fpexc_mode & PR_FP_EXC_RES)) + return 1; + if ((FP_CUR_EXCEPTIONS & FP_EX_INVALID) + && (current->thread.fpexc_mode & PR_FP_EXC_INV)) + return 1; + } return 0; illegal: @@ -662,21 +727,28 @@ int speround_handler(struct pt_regs *regs) { union dw_union fgpr; int s_lo, s_hi; - unsigned long speinsn, type, fc; + int lo_inexact, hi_inexact; + int fp_result; + unsigned long speinsn, type, fb, fc, fptype, func; if (get_user(speinsn, (unsigned int __user *) regs->nip)) return -EFAULT; if ((speinsn >> 26) != 4) return -EINVAL; /* not an spe instruction */ - type = insn_type(speinsn & 0x7ff); + func = speinsn & 0x7ff; + type = insn_type(func); if (type == XCR) return -ENOSYS; __FPU_FPSCR = mfspr(SPRN_SPEFSCR); pr_debug("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR); + fptype = (speinsn >> 5) & 0x7; + /* No need to round if the result is exact */ - if (!(__FPU_FPSCR & FP_EX_INEXACT)) + lo_inexact = __FPU_FPSCR & (SPEFSCR_FG | SPEFSCR_FX); + hi_inexact = __FPU_FPSCR & (SPEFSCR_FGH | SPEFSCR_FXH); + if (!(lo_inexact || (hi_inexact && fptype == VCT))) return 0; fc = (speinsn >> 21) & 0x1f; @@ -685,9 +757,68 @@ int speround_handler(struct pt_regs *regs) fgpr.wp[0] = current->thread.evr[fc]; fgpr.wp[1] = regs->gpr[fc]; + fb = (speinsn >> 11) & 0x1f; + switch (func) { + case EFSCTUIZ: + case EFSCTSIZ: + case EVFSCTUIZ: + case EVFSCTSIZ: + case EFDCTUIDZ: + case EFDCTSIDZ: + case EFDCTUIZ: + case EFDCTSIZ: + /* + * These instructions always round to zero, + * independent of the rounding mode. + */ + return 0; + + case EFSCTUI: + case EFSCTUF: + case EVFSCTUI: + case EVFSCTUF: + case EFDCTUI: + case EFDCTUF: + fp_result = 0; + s_lo = 0; + s_hi = 0; + break; + + case EFSCTSI: + case EFSCTSF: + fp_result = 0; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_lo = regs->gpr[fb] & SIGN_BIT_S; + break; + + case EVFSCTSI: + case EVFSCTSF: + fp_result = 0; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_lo = regs->gpr[fb] & SIGN_BIT_S; + if (fgpr.wp[0] == 0) + s_hi = current->thread.evr[fb] & SIGN_BIT_S; + break; + + case EFDCTSI: + case EFDCTSF: + fp_result = 0; + s_hi = s_lo; + /* Recover the sign of a zero result if possible. */ + if (fgpr.wp[1] == 0) + s_hi = current->thread.evr[fb] & SIGN_BIT_S; + break; + + default: + fp_result = 1; + break; + } + pr_debug("round fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); - switch ((speinsn >> 5) & 0x7) { + switch (fptype) { /* Since SPE instructions on E500 core can handle round to nearest * and round toward zero with IEEE-754 complied, we just need * to handle round toward +Inf and round toward -Inf by software. @@ -696,25 +827,52 @@ int speround_handler(struct pt_regs *regs) if ((FP_ROUNDMODE) == FP_RND_PINF) { if (!s_lo) fgpr.wp[1]++; /* Z > 0, choose Z1 */ } else { /* round to -Inf */ - if (s_lo) fgpr.wp[1]++; /* Z < 0, choose Z2 */ + if (s_lo) { + if (fp_result) + fgpr.wp[1]++; /* Z < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z < 0, choose Z2 */ + } } break; case DPFP: if (FP_ROUNDMODE == FP_RND_PINF) { - if (!s_hi) fgpr.dp[0]++; /* Z > 0, choose Z1 */ + if (!s_hi) { + if (fp_result) + fgpr.dp[0]++; /* Z > 0, choose Z1 */ + else + fgpr.wp[1]++; /* Z > 0, choose Z1 */ + } } else { /* round to -Inf */ - if (s_hi) fgpr.dp[0]++; /* Z < 0, choose Z2 */ + if (s_hi) { + if (fp_result) + fgpr.dp[0]++; /* Z < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z < 0, choose Z2 */ + } } break; case VCT: if (FP_ROUNDMODE == FP_RND_PINF) { - if (!s_lo) fgpr.wp[1]++; /* Z_low > 0, choose Z1 */ - if (!s_hi) fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */ + if (lo_inexact && !s_lo) + fgpr.wp[1]++; /* Z_low > 0, choose Z1 */ + if (hi_inexact && !s_hi) + fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */ } else { /* round to -Inf */ - if (s_lo) fgpr.wp[1]++; /* Z_low < 0, choose Z2 */ - if (s_hi) fgpr.wp[0]++; /* Z_high < 0, choose Z2 */ + if (lo_inexact && s_lo) { + if (fp_result) + fgpr.wp[1]++; /* Z_low < 0, choose Z2 */ + else + fgpr.wp[1]--; /* Z_low < 0, choose Z2 */ + } + if (hi_inexact && s_hi) { + if (fp_result) + fgpr.wp[0]++; /* Z_high < 0, choose Z2 */ + else + fgpr.wp[0]--; /* Z_high < 0, choose Z2 */ + } } break; @@ -727,6 +885,8 @@ int speround_handler(struct pt_regs *regs) pr_debug(" to fgpr: %08x %08x\n", fgpr.wp[0], fgpr.wp[1]); + if (current->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) + return (current->thread.fpexc_mode & PR_FP_EXC_RES) ? 1 : 0; return 0; } diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 07ba45b0f07c..94cd728166d3 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -52,6 +52,7 @@ #include #include #include +#include #include "mmu_decl.h" @@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, return 1UL << camsize; } -unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt, + unsigned long ram, int max_cam_idx) { int i; - unsigned long virt = PAGE_OFFSET; - phys_addr_t phys = memstart_addr; unsigned long amount_mapped = 0; /* Calculate CAM values */ @@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) } tlbcam_index = i; +#ifdef CONFIG_PPC64 + get_paca()->tcd.esel_next = i; + get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + get_paca()->tcd.esel_first = i; +#endif + return amount_mapped; } +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +{ + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + + return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx); +} + #ifdef CONFIG_PPC32 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) @@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void) /* adjust lowmem size to __max_low_memory */ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + i = switch_to_as1(); __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(i, 0, 0, 1); pr_info("Memory CAM mapping: "); for (i = 0; i < tlbcam_index - 1; i++) @@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base, /* 64M mapped initially according to head_fsl_booke.S */ memblock_set_current_limit(min_t(u64, limit, 0x04000000)); } + +#ifdef CONFIG_RELOCATABLE +int __initdata is_second_reloc; +notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start) +{ + unsigned long base = KERNELBASE; + + kernstart_addr = start; + if (is_second_reloc) { + virt_phys_offset = PAGE_OFFSET - memstart_addr; + return; + } + + /* + * Relocatable kernel support based on processing of dynamic + * relocation entries. Before we get the real memstart_addr, + * We will compute the virt_phys_offset like this: + * virt_phys_offset = stext.run - kernstart_addr + * + * stext.run = (KERNELBASE & ~0x3ffffff) + + * (kernstart_addr & 0x3ffffff) + * When we relocate, we have : + * + * (kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff) + * + * hence: + * virt_phys_offset = (KERNELBASE & ~0x3ffffff) - + * (kernstart_addr & ~0x3ffffff) + * + */ + start &= ~0x3ffffff; + base &= ~0x3ffffff; + virt_phys_offset = base - start; + early_get_first_memblock_info(__va(dt_ptr), NULL); + /* + * We now get the memstart_addr, then we should check if this + * address is the same as what the PAGE_OFFSET map to now. If + * not we have to change the map of PAGE_OFFSET to memstart_addr + * and do a second relocation. + */ + if (start != memstart_addr) { + int n; + long offset = start - memstart_addr; + + is_second_reloc = 1; + n = switch_to_as1(); + /* map a 64M area for the second relocation */ + if (memstart_addr > start) + map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM); + else + map_mem_in_cams_addr(start, PAGE_OFFSET + offset, + 0x4000000, CONFIG_LOWMEM_CAM_NUM); + restore_to_as0(n, offset, __va(dt_ptr), 1); + /* We should never reach here */ + panic("Relocation error"); + } +} +#endif #endif diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c index 74551b5e41e5..5e4ee2573903 100644 --- a/arch/powerpc/mm/hugetlbpage-book3e.c +++ b/arch/powerpc/mm/hugetlbpage-book3e.c @@ -8,6 +8,44 @@ #include #include +#ifdef CONFIG_PPC_FSL_BOOK3E +#ifdef CONFIG_PPC64 +static inline int tlb1_next(void) +{ + struct paca_struct *paca = get_paca(); + struct tlb_core_data *tcd; + int this, next; + + tcd = paca->tcd_ptr; + this = tcd->esel_next; + + next = this + 1; + if (next >= tcd->esel_max) + next = tcd->esel_first; + + tcd->esel_next = next; + return this; +} +#else +static inline int tlb1_next(void) +{ + int index, ncams; + + ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; + + index = __get_cpu_var(next_tlbcam_idx); + + /* Just round-robin the entries and wrap when we hit the end */ + if (unlikely(index == ncams - 1)) + __get_cpu_var(next_tlbcam_idx) = tlbcam_index; + else + __get_cpu_var(next_tlbcam_idx)++; + + return index; +} +#endif /* !PPC64 */ +#endif /* FSL */ + static inline int mmu_get_tsize(int psize) { return mmu_psize_defs[psize].enc; @@ -47,7 +85,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, struct mm_struct *mm; #ifdef CONFIG_PPC_FSL_BOOK3E - int index, ncams; + int index; #endif if (unlikely(is_kernel_addr(ea))) @@ -77,18 +115,11 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, } #ifdef CONFIG_PPC_FSL_BOOK3E - ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY; - /* We have to use the CAM(TLB1) on FSL parts for hugepages */ - index = __get_cpu_var(next_tlbcam_idx); + index = tlb1_next(); mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1)); - - /* Just round-robin the entries and wrap when we hit the end */ - if (unlikely(index == ncams - 1)) - __get_cpu_var(next_tlbcam_idx) = tlbcam_index; - else - __get_cpu_var(next_tlbcam_idx)++; #endif + mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize); mas2 = ea & ~((1UL << shift) - 1); mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK; @@ -103,7 +134,8 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea, if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) { mtspr(SPRN_MAS7_MAS3, mas7_3); } else { - mtspr(SPRN_MAS7, upper_32_bits(mas7_3)); + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) + mtspr(SPRN_MAS7, upper_32_bits(mas7_3)); mtspr(SPRN_MAS3, lower_32_bits(mas7_3)); } diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 9c25feba7c40..b1c5734bc2ce 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -307,6 +307,12 @@ static void __init register_page_bootmem_info(void) void __init mem_init(void) { + /* + * book3s is limited to 16 page sizes due to encoding this in + * a 4-bit field for slices. + */ + BUILD_BUG_ON(MMU_PAGE_COUNT > 16); + #ifdef CONFIG_SWIOTLB swiotlb_init(0); #endif diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 83eb5d5f53d5..9615d82919b8 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -148,6 +148,8 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); +extern int switch_to_as1(void); +extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu); #endif extern void loadcam_entry(unsigned int index); diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 5b9601715289..343a87fa78b5 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -299,6 +299,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); } + smp_wmb(); return err; } diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 7f0e872ab83d..65b7b65e8708 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -152,6 +152,18 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags) } #endif /* !CONFIG_PPC_MMU_NOHASH */ } + +#ifdef CONFIG_PPC_BOOK3E_64 + /* + * With hardware tablewalk, a sync is needed to ensure that + * subsequent accesses see the PTE we just wrote. Unlike userspace + * mappings, we can't tolerate spurious faults, so make sure + * the new PTE will be seen the first time. + */ + mb(); +#else + smp_wmb(); +#endif return 0; } diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index b4113bf86353..16250b162375 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -136,7 +136,7 @@ BEGIN_MMU_FTR_SECTION */ PPC_TLBSRX_DOT(0,R16) ldx r14,r14,r15 /* grab pgd entry */ - beq normal_tlb_miss_done /* tlb exists already, bail */ + beq tlb_miss_done_bolted /* tlb exists already, bail */ MMU_FTR_SECTION_ELSE ldx r14,r14,r15 /* grab pgd entry */ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) @@ -192,6 +192,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) mtspr SPRN_MAS7_MAS3,r15 tlbwe +tlb_miss_done_bolted: TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) tlb_epilog_bolted rfi @@ -239,6 +240,177 @@ itlb_miss_fault_bolted: beq tlb_miss_common_bolted b itlb_miss_kernel_bolted +/* + * TLB miss handling for e6500 and derivatives, using hardware tablewalk. + * + * Linear mapping is bolted: no virtual page table or nested TLB misses + * Indirect entries in TLB1, hardware loads resulting direct entries + * into TLB0 + * No HES or NV hint on TLB1, so we need to do software round-robin + * No tlbsrx. so we need a spinlock, and we have to deal + * with MAS-damage caused by tlbsx + * 4K pages only + */ + + START_EXCEPTION(instruction_tlb_miss_e6500) + tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0 + + ld r11,PACA_TCD_PTR(r13) + srdi. r15,r16,60 /* get region */ + ori r16,r16,1 + + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne tlb_miss_kernel_e6500 /* user/kernel test */ + + b tlb_miss_common_e6500 + + START_EXCEPTION(data_tlb_miss_e6500) + tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR + + ld r11,PACA_TCD_PTR(r13) + srdi. r15,r16,60 /* get region */ + rldicr r16,r16,0,62 + + TLB_MISS_STATS_SAVE_INFO_BOLTED + bne tlb_miss_kernel_e6500 /* user vs kernel check */ + +/* + * This is the guts of the TLB miss handler for e6500 and derivatives. + * We are entered with: + * + * r16 = page of faulting address (low bit 0 if data, 1 if instruction) + * r15 = crap (free to use) + * r14 = page table base + * r13 = PACA + * r11 = tlb_per_core ptr + * r10 = crap (free to use) + */ +tlb_miss_common_e6500: + /* + * Search if we already have an indirect entry for that virtual + * address, and if we do, bail out. + * + * MAS6:IND should be already set based on MAS4 + */ + addi r10,r11,TCD_LOCK +1: lbarx r15,0,r10 + cmpdi r15,0 + bne 2f + li r15,1 + stbcx. r15,0,r10 + bne 1b + .subsection 1 +2: lbz r15,0(r10) + cmpdi r15,0 + bne 2b + b 1b + .previous + + mfspr r15,SPRN_MAS2 + + tlbsx 0,r16 + mfspr r10,SPRN_MAS1 + andis. r10,r10,MAS1_VALID@h + bne tlb_miss_done_e6500 + + /* Undo MAS-damage from the tlbsx */ + mfspr r10,SPRN_MAS1 + oris r10,r10,MAS1_VALID@h + mtspr SPRN_MAS1,r10 + mtspr SPRN_MAS2,r15 + + /* Now, we need to walk the page tables. First check if we are in + * range. + */ + rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 + bne- tlb_miss_fault_e6500 + + rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 + cmpldi cr0,r14,0 + clrrdi r15,r15,3 + beq- tlb_miss_fault_e6500 /* No PGDIR, bail */ + ldx r14,r14,r15 /* grab pgd entry */ + + rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 + clrrdi r15,r15,3 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */ + ldx r14,r14,r15 /* grab pud entry */ + + rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 + clrrdi r15,r15,3 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 + ldx r14,r14,r15 /* Grab pmd entry */ + + mfspr r10,SPRN_MAS0 + cmpdi cr0,r14,0 + bge tlb_miss_fault_e6500 + + /* Now we build the MAS for a 2M indirect page: + * + * MAS 0 : ESEL needs to be filled by software round-robin + * MAS 1 : Fully set up + * - PID already updated by caller if necessary + * - TSIZE for now is base ind page size always + * - TID already cleared if necessary + * MAS 2 : Default not 2M-aligned, need to be redone + * MAS 3+7 : Needs to be done + */ + + ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) + mtspr SPRN_MAS7_MAS3,r14 + + clrrdi r15,r16,21 /* make EA 2M-aligned */ + mtspr SPRN_MAS2,r15 + + lbz r15,TCD_ESEL_NEXT(r11) + lbz r16,TCD_ESEL_MAX(r11) + lbz r14,TCD_ESEL_FIRST(r11) + rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */ + addi r15,r15,1 /* increment esel_next */ + mtspr SPRN_MAS0,r10 + cmpw r15,r16 + iseleq r15,r14,r15 /* if next == last use first */ + stb r15,TCD_ESEL_NEXT(r11) + + tlbwe + +tlb_miss_done_e6500: + .macro tlb_unlock_e6500 + li r15,0 + isync + stb r15,TCD_LOCK(r11) + .endm + + tlb_unlock_e6500 + TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) + tlb_epilog_bolted + rfi + +tlb_miss_kernel_e6500: + mfspr r10,SPRN_MAS1 + ld r14,PACA_KERNELPGD(r13) + cmpldi cr0,r15,8 /* Check for vmalloc region */ + rlwinm r10,r10,0,16,1 /* Clear TID */ + mtspr SPRN_MAS1,r10 + beq+ tlb_miss_common_e6500 + +tlb_miss_fault_e6500: + tlb_unlock_e6500 + /* We need to check if it was an instruction miss */ + andi. r16,r16,1 + bne itlb_miss_fault_e6500 +dtlb_miss_fault_e6500: + TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_data_storage_book3e +itlb_miss_fault_e6500: + TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) + tlb_epilog_bolted + b exc_instruction_storage_book3e + + /********************************************************************** * * * TLB miss handling for Book3E with TLB reservation and HES support * diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 8805b7b87dc6..735839b74dc5 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "mmu_decl.h" @@ -58,6 +59,10 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { .shift = 12, .enc = BOOK3E_PAGESZ_4K, }, + [MMU_PAGE_2M] = { + .shift = 21, + .enc = BOOK3E_PAGESZ_2M, + }, [MMU_PAGE_4M] = { .shift = 22, .enc = BOOK3E_PAGESZ_4M, @@ -136,7 +141,7 @@ static inline int mmu_get_tsize(int psize) int mmu_linear_psize; /* Page size used for the linear mapping */ int mmu_pte_psize; /* Page size used for PTE pages */ int mmu_vmemmap_psize; /* Page size used for the virtual mem map */ -int book3e_htw_enabled; /* Is HW tablewalk enabled ? */ +int book3e_htw_mode; /* HW tablewalk? Value is PPC_HTW_* */ unsigned long linear_map_top; /* Top of linear mapping */ #endif /* CONFIG_PPC64 */ @@ -377,7 +382,7 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) { int tsize = mmu_psize_defs[mmu_pte_psize].enc; - if (book3e_htw_enabled) { + if (book3e_htw_mode != PPC_HTW_NONE) { unsigned long start = address & PMD_MASK; unsigned long end = address + PMD_SIZE; unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift; @@ -430,7 +435,7 @@ static void setup_page_sizes(void) def = &mmu_psize_defs[psize]; shift = def->shift; - if (shift == 0) + if (shift == 0 || shift & 1) continue; /* adjust to be in terms of 4^shift Kb */ @@ -440,21 +445,40 @@ static void setup_page_sizes(void) def->flags |= MMU_PAGE_SIZE_DIRECT; } - goto no_indirect; + goto out; } if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) { - u32 tlb1ps = mfspr(SPRN_TLB1PS); + u32 tlb1cfg, tlb1ps; + + tlb0cfg = mfspr(SPRN_TLB0CFG); + tlb1cfg = mfspr(SPRN_TLB1CFG); + tlb1ps = mfspr(SPRN_TLB1PS); + eptcfg = mfspr(SPRN_EPTCFG); + + if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) + book3e_htw_mode = PPC_HTW_E6500; + + /* + * We expect 4K subpage size and unrestricted indirect size. + * The lack of a restriction on indirect size is a Freescale + * extension, indicated by PSn = 0 but SPSn != 0. + */ + if (eptcfg != 2) + book3e_htw_mode = PPC_HTW_NONE; for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { struct mmu_psize_def *def = &mmu_psize_defs[psize]; if (tlb1ps & (1U << (def->shift - 10))) { def->flags |= MMU_PAGE_SIZE_DIRECT; + + if (book3e_htw_mode && psize == MMU_PAGE_2M) + def->flags |= MMU_PAGE_SIZE_INDIRECT; } } - goto no_indirect; + goto out; } #endif @@ -471,8 +495,11 @@ static void setup_page_sizes(void) } /* Indirect page sizes supported ? */ - if ((tlb0cfg & TLBnCFG_IND) == 0) - goto no_indirect; + if ((tlb0cfg & TLBnCFG_IND) == 0 || + (tlb0cfg & TLBnCFG_PT) == 0) + goto out; + + book3e_htw_mode = PPC_HTW_IBM; /* Now, we only deal with one IND page size for each * direct size. Hopefully all implementations today are @@ -497,8 +524,8 @@ static void setup_page_sizes(void) def->ind = ps + 10; } } - no_indirect: +out: /* Cleanup array and print summary */ pr_info("MMU: Supported page sizes\n"); for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { @@ -520,23 +547,23 @@ static void setup_page_sizes(void) static void setup_mmu_htw(void) { - /* Check if HW tablewalk is present, and if yes, enable it by: - * - * - patching the TLB miss handlers to branch to the - * one dedicates to it - * - * - setting the global book3e_htw_enabled - */ - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + /* + * If we want to use HW tablewalk, enable it by patching the TLB miss + * handlers to branch to the one dedicated to it. + */ - if ((tlb0cfg & TLBnCFG_IND) && - (tlb0cfg & TLBnCFG_PT)) { + switch (book3e_htw_mode) { + case PPC_HTW_IBM: patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e); patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e); - book3e_htw_enabled = 1; + break; + case PPC_HTW_E6500: + patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e); + patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e); + break; } pr_info("MMU: Book3E HW tablewalk %s\n", - book3e_htw_enabled ? "enabled" : "not supported"); + book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported"); } /* @@ -576,8 +603,16 @@ static void __early_init_mmu(int boot_cpu) /* Set MAS4 based on page table setting */ mas4 = 0x4 << MAS4_WIMGED_SHIFT; - if (book3e_htw_enabled) { - mas4 |= mas4 | MAS4_INDD; + switch (book3e_htw_mode) { + case PPC_HTW_E6500: + mas4 |= MAS4_INDD; + mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT; + mas4 |= MAS4_TLBSELD(1); + mmu_pte_psize = MMU_PAGE_2M; + break; + + case PPC_HTW_IBM: + mas4 |= MAS4_INDD; #ifdef CONFIG_PPC_64K_PAGES mas4 |= BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT; mmu_pte_psize = MMU_PAGE_256M; @@ -585,13 +620,16 @@ static void __early_init_mmu(int boot_cpu) mas4 |= BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT; mmu_pte_psize = MMU_PAGE_1M; #endif - } else { + break; + + case PPC_HTW_NONE: #ifdef CONFIG_PPC_64K_PAGES mas4 |= BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT; #else mas4 |= BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT; #endif mmu_pte_psize = mmu_virtual_psize; + break; } mtspr(SPRN_MAS4, mas4); @@ -611,8 +649,11 @@ static void __early_init_mmu(int boot_cpu) /* limit memory so we dont have linear faults */ memblock_enforce_memory_limit(linear_map_top); - patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); - patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e); + if (book3e_htw_mode == PPC_HTW_NONE) { + patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e); + patch_exception(0x1e0, + exc_instruction_tlb_miss_bolted_book3e); + } } #endif diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index 626ad081639f..43ff3c797fbf 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -402,7 +402,9 @@ _GLOBAL(set_context) * Load TLBCAM[index] entry in to the L2 CAM MMU */ _GLOBAL(loadcam_entry) - LOAD_REG_ADDR(r4, TLBCAM) + mflr r5 + LOAD_REG_ADDR_PIC(r4, TLBCAM) + mtlr r5 mulli r5,r3,TLBCAM_SIZE add r3,r5,r4 lwz r4,TLBCAM_MAS0(r3) diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 4d4634958cfb..c17aae80e7ff 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -123,6 +123,12 @@ config P1023_RDS help This option enables support for the P1023 RDS and RDB boards +config TWR_P102x + bool "Freescale TWR-P102x" + select DEFAULT_UIMAGE + help + This option enables support for the TWR-P1025 board. + config SOCRATES bool "Socrates" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index dd4c0b59577b..25cebe74ac46 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDS) += p1023_rds.o +obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c index eba78c85303f..3b085c7ee539 100644 --- a/arch/powerpc/platforms/85xx/common.c +++ b/arch/powerpc/platforms/85xx/common.c @@ -9,6 +9,7 @@ #include #include +#include #include #include "mpc85xx.h" @@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void) irq_set_chained_handler(irq, cpm2_cascade); } #endif + +#ifdef CONFIG_QUICC_ENGINE +void __init mpc85xx_qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + np = of_find_node_by_name(NULL, "qe"); + if (!np) { + pr_err("%s: Could not find Quicc Engine node\n", + __func__); + return; + } + } + + if (!of_device_is_available(np)) { + of_node_put(np); + return; + } + + qe_reset(); + of_node_put(np); + + np = of_find_node_by_name(NULL, "par_io"); + if (np) { + struct device_node *ucc; + + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(ucc, "ucc") + par_io_of_config(ucc); + + } +} +#endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h index 2aa7c5dc2c7f..fc51dd4092e5 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx.h +++ b/arch/powerpc/platforms/85xx/mpc85xx.h @@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void); static inline void __init mpc85xx_cpm2_pic_init(void) {} #endif /* CONFIG_CPM2 */ +#ifdef CONFIG_QUICC_ENGINE +extern void mpc85xx_qe_init(void); +#else +static inline void __init mpc85xx_qe_init(void) {} +#endif + #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index a7b3621a8df5..34f3c5eb3bee 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc. * All rights reserved. * * Author: Andy Fleming @@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void) { struct device_node *np; - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - np = of_find_node_by_name(NULL, "qe"); - if (!np) - return; - } - - if (!of_device_is_available(np)) { - of_node_put(np); - return; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - } - + mpc85xx_qe_init(); mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index 53b6fb0a3d56..e15bdd18fdb2 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -1,7 +1,7 @@ /* * MPC85xx RDB Board Setup * - * Copyright 2009,2012 Freescale Semiconductor Inc. + * Copyright 2009,2012-2013 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void) fsl_pci_assign_primary(); #ifdef CONFIG_QUICC_ENGINE - np = of_find_compatible_node(NULL, NULL, "fsl,qe"); - if (!np) { - pr_err("%s: Could not find Quicc Engine node\n", __func__); - goto qe_fail; - } - - qe_reset(); - of_node_put(np); - - np = of_find_node_by_name(NULL, "par_io"); - if (np) { - struct device_node *ucc; - - par_io_init(np); - of_node_put(np); - - for_each_node_by_name(ucc, "ucc") - par_io_of_config(ucc); - - } + mpc85xx_qe_init(); #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) if (machine_is(p1025_rdb)) { @@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void) } #endif - -qe_fail: #endif /* CONFIG_QUICC_ENGINE */ printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index 393f975ab397..6382098d6f8d 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image) } #endif /* CONFIG_KEXEC */ -static void smp_85xx_setup_cpu(int cpu_nr) +static void smp_85xx_basic_setup(int cpu_nr) { - if (smp_85xx_ops.probe == smp_mpic_probe) - mpic_setup_this_cpu(); - if (cpu_has_feature(CPU_FTR_DBELL)) doorbell_setup_this_cpu(); } +static void smp_85xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); + smp_85xx_basic_setup(cpu_nr); +} + static const struct of_device_id mpc85xx_smp_guts_ids[] = { { .compatible = "fsl,mpc8572-guts", }, { .compatible = "fsl,p1020-guts", }, @@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void) { struct device_node *np; - smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; np = of_find_node_by_type(NULL, "open-pic"); if (np) { smp_85xx_ops.probe = smp_mpic_probe; + smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu; smp_85xx_ops.message_pass = smp_mpic_message_pass; - } + } else + smp_85xx_ops.setup_cpu = smp_85xx_basic_setup; if (cpu_has_feature(CPU_FTR_DBELL)) { /* @@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void) */ smp_85xx_ops.message_pass = NULL; smp_85xx_ops.cause_ipi = doorbell_cause_ipi; + smp_85xx_ops.probe = NULL; } np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids); diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 000000000000..c25ff10f05ee --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,147 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 302ba43d73a1..6d3c7a9fd047 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -67,6 +67,18 @@ config PPC_C2K This option enables support for the GE Fanuc C2K board (formerly an SBS board). +config MVME5100 + bool "Motorola/Emerson MVME5100" + depends on EMBEDDED6xx + select MPIC + select PCI + select PPC_INDIRECT_PCI + select PPC_I8259 + select PPC_NATIVE + help + This option enables support for the Motorola (now Emerson) MVME5100 + board. + config TSI108_BRIDGE bool select PCI @@ -113,4 +125,3 @@ config WII help Select WII if configuring for the Nintendo Wii. More information at: - diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile index 66c23e423f40..cdd48d402b93 100644 --- a/arch/powerpc/platforms/embedded6xx/Makefile +++ b/arch/powerpc/platforms/embedded6xx/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o obj-$(CONFIG_GAMECUBE) += gamecube.o obj-$(CONFIG_WII) += wii.o hlwd-pic.o +obj-$(CONFIG_MVME5100) += mvme5100.o diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c new file mode 100644 index 000000000000..25e3bfb64efb --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c @@ -0,0 +1,221 @@ +/* + * Board setup routines for the Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * Based on earlier code by: + * + * Matt Porter, MontaVista Software Inc. + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Stephen Chivers + * + */ + +#include + +#include +#include +#include +#include +#include +#include + +#define HAWK_MPIC_SIZE 0x00040000U +#define MVME5100_PCI_MEM_OFFSET 0x00000000 + +/* Board register addresses. */ +#define BOARD_STATUS_REG 0xfef88080 +#define BOARD_MODFAIL_REG 0xfef88090 +#define BOARD_MODRST_REG 0xfef880a0 +#define BOARD_TBEN_REG 0xfef880c0 +#define BOARD_SW_READ_REG 0xfef880e0 +#define BOARD_GEO_ADDR_REG 0xfef880e8 +#define BOARD_EXT_FEATURE1_REG 0xfef880f0 +#define BOARD_EXT_FEATURE2_REG 0xfef88100 + +static phys_addr_t pci_membase; +static u_char *restart; + +static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +static void __init mvme5100_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cp = NULL; + unsigned int cirq; + unsigned long intack = 0; + const u32 *prop = NULL; + + np = of_find_node_by_type(NULL, "open-pic"); + if (!np) { + pr_err("Could not find open-pic node\n"); + return; + } + + mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, pci_membase + 0x10000); + + mpic_init(mpic); + + cp = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (cp == NULL) { + pr_warn("mvme5100_pic_init: couldn't find i8259\n"); + return; + } + + cirq = irq_of_parse_and_map(cp, 0); + if (cirq == NO_IRQ) { + pr_warn("mvme5100_pic_init: no cascade interrupt?\n"); + return; + } + + np = of_find_compatible_node(NULL, "pci", "mpc10x-pci"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + + if (prop) + intack = prop[0]; + + of_node_put(np); + } + + if (intack) + pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n", + intack); + + i8259_init(cp, intack); + of_node_put(cp); + irq_set_chained_handler(cirq, mvme5100_8259_cascade); +} + +static int __init mvme5100_add_bridge(struct device_node *dev) +{ + const int *bus_range; + int len; + struct pci_controller *hose; + unsigned short devid; + + pr_info("Adding PCI host bridge %s\n", dev->full_name); + + bus_range = of_get_property(dev, "bus-range", &len); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0); + + pci_process_bridge_OF_ranges(hose, dev, 1); + + early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid); + + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) { + pr_err("HAWK PHB not present?\n"); + return 0; + } + + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase); + + if (pci_membase == 0) { + pr_err("HAWK PHB mibar not correctly set?\n"); + return 0; + } + + pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase); + + return 0; +} + +static struct of_device_id mvme5100_of_bus_ids[] __initdata = { + { .compatible = "hawk-bridge", }, + {}, +}; + +/* + * Setup the architecture + */ +static void __init mvme5100_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mvme5100_setup_arch()", 0); + + for_each_compatible_node(np, "pci", "hawk-pci") + mvme5100_add_bridge(np); + + restart = ioremap(BOARD_MODRST_REG, 4); +} + + +static void mvme5100_show_cpuinfo(struct seq_file *m) +{ + seq_puts(m, "Vendor\t\t: Motorola/Emerson\n"); + seq_puts(m, "Machine\t\t: MVME5100\n"); +} + +static void mvme5100_restart(char *cmd) +{ + + local_irq_disable(); + mtmsr(mfmsr() | MSR_IP); + + out_8((u_char *) restart, 0x01); + + while (1) + ; +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mvme5100_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MVME5100"); +} + +static int __init probe_of_platform_devices(void) +{ + + of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL); + return 0; +} + +machine_device_initcall(mvme5100, probe_of_platform_devices); + +define_machine(mvme5100) { + .name = "MVME5100", + .probe = mvme5100_probe, + .setup_arch = mvme5100_setup_arch, + .init_IRQ = mvme5100_pic_init, + .show_cpuinfo = mvme5100_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mvme5100_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 6bc5a546d49f..d631022ffb4b 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -214,10 +214,14 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) struct fsl_lbc_ctrl *ctrl = data; struct fsl_lbc_regs __iomem *lbc = ctrl->regs; u32 status; + unsigned long flags; + spin_lock_irqsave(&fsl_lbc_lock, flags); status = in_be32(&lbc->ltesr); - if (!status) + if (!status) { + spin_unlock_irqrestore(&fsl_lbc_lock, flags); return IRQ_NONE; + } out_be32(&lbc->ltesr, LTESR_CLEAR); out_be32(&lbc->lteatr, 0); @@ -260,6 +264,7 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data) if (status & ~LTESR_MASK) dev_err(ctrl->dev, "Unknown error: " "LTESR 0x%08X\n", status); + spin_unlock_irqrestore(&fsl_lbc_lock, flags); return IRQ_HANDLED; } @@ -298,8 +303,8 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev) goto err; } - fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0); - if (fsl_lbc_ctrl_dev->irq == NO_IRQ) { + fsl_lbc_ctrl_dev->irq[0] = irq_of_parse_and_map(dev->dev.of_node, 0); + if (!fsl_lbc_ctrl_dev->irq[0]) { dev_err(&dev->dev, "failed to get irq resource\n"); ret = -ENODEV; goto err; @@ -311,20 +316,34 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev) if (ret < 0) goto err; - ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0, + ret = request_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_irq, 0, "fsl-lbc", fsl_lbc_ctrl_dev); if (ret != 0) { dev_err(&dev->dev, "failed to install irq (%d)\n", - fsl_lbc_ctrl_dev->irq); - ret = fsl_lbc_ctrl_dev->irq; + fsl_lbc_ctrl_dev->irq[0]); + ret = fsl_lbc_ctrl_dev->irq[0]; goto err; } + fsl_lbc_ctrl_dev->irq[1] = irq_of_parse_and_map(dev->dev.of_node, 1); + if (fsl_lbc_ctrl_dev->irq[1]) { + ret = request_irq(fsl_lbc_ctrl_dev->irq[1], fsl_lbc_ctrl_irq, + IRQF_SHARED, "fsl-lbc-err", fsl_lbc_ctrl_dev); + if (ret) { + dev_err(&dev->dev, "failed to install irq (%d)\n", + fsl_lbc_ctrl_dev->irq[1]); + ret = fsl_lbc_ctrl_dev->irq[1]; + goto err1; + } + } + /* Enable interrupts for any detected events */ out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE); return 0; +err1: + free_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_dev); err: iounmap(fsl_lbc_ctrl_dev->regs); kfree(fsl_lbc_ctrl_dev); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 7066e5262468..a625dcf26b2b 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -454,7 +454,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus) } } -int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) +int fsl_add_bridge(struct platform_device *pdev, int is_primary) { int len; struct pci_controller *hose; @@ -1035,6 +1035,7 @@ static const struct of_device_id pci_ids[] = { { .compatible = "fsl,mpc8548-pcie", }, { .compatible = "fsl,mpc8610-pci", }, { .compatible = "fsl,mpc8641-pcie", }, + { .compatible = "fsl,qoriq-pcie", }, { .compatible = "fsl,qoriq-pcie-v2.1", }, { .compatible = "fsl,qoriq-pcie-v2.2", }, { .compatible = "fsl,qoriq-pcie-v2.3", }, diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c index c6c8b526a4f6..1f6c570d66d4 100644 --- a/arch/powerpc/sysdev/indirect_pci.c +++ b/arch/powerpc/sysdev/indirect_pci.c @@ -152,10 +152,8 @@ static struct pci_ops indirect_pci_ops = .write = indirect_write_config, }; -void __init -setup_indirect_pci(struct pci_controller* hose, - resource_size_t cfg_addr, - resource_size_t cfg_data, u32 flags) +void setup_indirect_pci(struct pci_controller *hose, resource_size_t cfg_addr, + resource_size_t cfg_data, u32 flags) { resource_size_t base = cfg_addr & PAGE_MASK; void __iomem *mbase; diff --git a/arch/powerpc/sysdev/mpic_timer.c b/arch/powerpc/sysdev/mpic_timer.c index 22d7d57eead9..9d9b06217f8b 100644 --- a/arch/powerpc/sysdev/mpic_timer.c +++ b/arch/powerpc/sysdev/mpic_timer.c @@ -41,6 +41,7 @@ #define MPIC_TIMER_TCR_ROVR_OFFSET 24 #define TIMER_STOP 0x80000000 +#define GTCCR_TOG 0x80000000 #define TIMERS_PER_GROUP 4 #define MAX_TICKS (~0U >> 1) #define MAX_TICKS_CASCADE (~0U) @@ -96,8 +97,11 @@ static void convert_ticks_to_time(struct timer_group_priv *priv, time->tv_sec = (__kernel_time_t)div_u64(ticks, priv->timerfreq); tmp_sec = (u64)time->tv_sec * (u64)priv->timerfreq; - time->tv_usec = (__kernel_suseconds_t) - div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq); + time->tv_usec = 0; + + if (tmp_sec <= ticks) + time->tv_usec = (__kernel_suseconds_t) + div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq); return; } @@ -327,11 +331,13 @@ void mpic_get_remain_time(struct mpic_timer *handle, struct timeval *time) casc_priv = priv->timer[handle->num].cascade_handle; if (casc_priv) { tmp_ticks = in_be32(&priv->regs[handle->num].gtccr); + tmp_ticks &= ~GTCCR_TOG; ticks = ((u64)tmp_ticks & UINT_MAX) * (u64)MAX_TICKS_CASCADE; tmp_ticks = in_be32(&priv->regs[handle->num - 1].gtccr); ticks += tmp_ticks; } else { ticks = in_be32(&priv->regs[handle->num].gtccr); + ticks &= ~GTCCR_TOG; } convert_ticks_to_time(priv, ticks, time); diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index 978db344bda0..b24aa010f68c 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -366,7 +366,7 @@ config TRACE_SINK "Trace data router for MIPI P1149.7 cJTAG standard". config PPC_EPAPR_HV_BYTECHAN - tristate "ePAPR hypervisor byte channel driver" + bool "ePAPR hypervisor byte channel driver" depends on PPC select EPAPR_PARAVIRT help diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h index 0beaee9dac1f..2b77058a7335 100644 --- a/include/linux/of_fdt.h +++ b/include/linux/of_fdt.h @@ -116,6 +116,7 @@ extern const void *of_flat_dt_match_machine(const void *default_match, extern void unflatten_device_tree(void); extern void unflatten_and_copy_device_tree(void); extern void early_init_devtree(void *); +extern void early_get_first_memblock_info(void *, phys_addr_t *); #else /* CONFIG_OF_FLATTREE */ static inline const char *of_flat_dt_get_machine_name(void) { return NULL; } static inline void unflatten_device_tree(void) {} diff --git a/include/math-emu/op-common.h b/include/math-emu/op-common.h index 9696a5e2c437..6bdf8c61d221 100644 --- a/include/math-emu/op-common.h +++ b/include/math-emu/op-common.h @@ -685,7 +685,7 @@ do { \ else \ { \ r = 0; \ - if (X##_s) \ + if (!X##_s) \ r = ~r; \ } \ FP_SET_EXCEPTION(FP_EX_INVALID); \ @@ -743,12 +743,17 @@ do { \ } \ else \ { \ + int _lz0, _lz1; \ if (X##_e <= -_FP_WORKBITS - 1) \ _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc); \ else \ _FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e, \ _FP_WFRACBITS_##fs); \ + _FP_FRAC_CLZ_##wc(_lz0, X); \ _FP_ROUND(wc, X); \ + _FP_FRAC_CLZ_##wc(_lz1, X); \ + if (_lz1 < _lz0) \ + X##_e++; /* For overflow detection. */ \ _FP_FRAC_SRL_##wc(X, _FP_WORKBITS); \ _FP_FRAC_ASSEMBLE_##wc(r, X, rsize); \ } \ @@ -762,7 +767,7 @@ do { \ if (!rsigned) \ { \ r = 0; \ - if (X##_s) \ + if (!X##_s) \ r = ~r; \ } \ else if (rsigned != 2) \