ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi

Introduce ACPI_IRQ_MODEL_GIC which is needed for ARM64 as GIC is
used, and then register device's gsi with the core IRQ subsystem.

acpi_register_gsi() is similar to DT based irq_of_parse_and_map(),
since gsi is unique in the system, so use hwirq number directly
for the mapping.

We are going to implement stacked domains when GICv2m, GICv3, ITS
support are added.

CC: Marc Zyngier <marc.zyngier@arm.com>
Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Tested-by: Yijing Wang <wangyijing@huawei.com>
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Jon Masters <jcm@redhat.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This commit is contained in:
Hanjun Guo 2015-03-24 14:02:48 +00:00 committed by Will Deacon
parent 020295b4cb
commit fbe61ec71a
3 changed files with 77 additions and 0 deletions

View File

@ -75,6 +75,12 @@ static int __init dt_scan_depth1_nodes(unsigned long node,
return 0;
}
/*
* Since we're on ARM, the default interrupt routing model
* clearly has to be GIC.
*/
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC;
/*
* __acpi_map_table() will be called before page_init(), so early_ioremap()
* or early_memremap() should be called here to for ACPI table mapping.
@ -218,6 +224,73 @@ void __init acpi_init_cpus(void)
pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
}
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
*irq = irq_find_mapping(NULL, gsi);
return 0;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
/*
* success: return IRQ number (>0)
* failure: return =< 0
*/
int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int irq_type;
/*
* ACPI have no bindings to indicate SPI or PPI, so we
* use different mappings from DT in ACPI.
*
* For FDT
* PPI interrupt: in the range [0, 15];
* SPI interrupt: in the range [0, 987];
*
* For ACPI, GSI should be unique so using
* the hwirq directly for the mapping:
* PPI interrupt: in the range [16, 31];
* SPI interrupt: in the range [32, 1019];
*/
if (trigger == ACPI_EDGE_SENSITIVE &&
polarity == ACPI_ACTIVE_LOW)
irq_type = IRQ_TYPE_EDGE_FALLING;
else if (trigger == ACPI_EDGE_SENSITIVE &&
polarity == ACPI_ACTIVE_HIGH)
irq_type = IRQ_TYPE_EDGE_RISING;
else if (trigger == ACPI_LEVEL_SENSITIVE &&
polarity == ACPI_ACTIVE_LOW)
irq_type = IRQ_TYPE_LEVEL_LOW;
else if (trigger == ACPI_LEVEL_SENSITIVE &&
polarity == ACPI_ACTIVE_HIGH)
irq_type = IRQ_TYPE_LEVEL_HIGH;
else
irq_type = IRQ_TYPE_NONE;
/*
* Since only one GIC is supported in ACPI 5.0, we can
* create mapping refer to the default domain
*/
irq = irq_create_mapping(NULL, gsi);
if (!irq)
return irq;
/* Set irq type if specified and different than the current one */
if (irq_type != IRQ_TYPE_NONE &&
irq_type != irq_get_trigger_type(irq))
irq_set_irq_type(irq, irq_type);
return irq;
}
EXPORT_SYMBOL_GPL(acpi_register_gsi);
void acpi_unregister_gsi(u32 gsi)
{
}
EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;

View File

@ -448,6 +448,9 @@ static int __init acpi_bus_init_irq(void)
case ACPI_IRQ_MODEL_IOSAPIC:
message = "IOSAPIC";
break;
case ACPI_IRQ_MODEL_GIC:
message = "GIC";
break;
case ACPI_IRQ_MODEL_PLATFORM:
message = "platform specific model";
break;

View File

@ -73,6 +73,7 @@ enum acpi_irq_model_id {
ACPI_IRQ_MODEL_IOAPIC,
ACPI_IRQ_MODEL_IOSAPIC,
ACPI_IRQ_MODEL_PLATFORM,
ACPI_IRQ_MODEL_GIC,
ACPI_IRQ_MODEL_COUNT
};