OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ARM: tegra: modify Tegra30 USB2 default phy_type to UTMI 

Modify Tegra30 default USB2 phy_type to UTMI; this matches
power-on-reset defaults and is expected to be the common case.

The current implementation is likely an incorrect
carry-over from Tegra20, where USB2 does default to ULPI.

Signed-off-by: Eric Brower <ebrower@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
This commit is contained in:
Eric Brower 2013-12-19 18:08:52 -08:00 committed by Stephen Warren
parent f044d6fa23
commit fd6441ec0f
1 changed files with 16 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
arch/arm/boot/dts/tegra30.dtsi
View File

@ -785,7 +785,7 @@
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d004000 0x4000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
@ -795,12 +795,23 @@
phy2: usb-phy@7d004000 {
compatible = "nvidia,tegra30-usb-phy";
reg = <0x7d004000 0x4000>;
phy_type = "ulpi";
reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB2>,
<&tegra_car TEGRA30_CLK_PLL_U>,
<&tegra_car TEGRA30_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
<&tegra_car TEGRA30_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
nvidia,hssync-start-delay = <9>;
nvidia,idle-wait-delay = <17>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
nvidia.xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
status = "disabled";
};