usb: phy: remove CONFIG_USB_OTG_UTILS

there are no more users of CONFIG_USB_OTG_UTILS
left in tree, we can remove it just fine.

[ kishon@ti.com : fixed a linking error due
	to original patch forgetting to change
	drivers/usb/Makefile ]

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Felipe Balbi 2013-03-07 11:31:18 +02:00
parent a948712d2a
commit fd89149875
7 changed files with 2 additions and 31 deletions

View File

@ -254,7 +254,7 @@ config BATTERY_RX51
config CHARGER_ISP1704
tristate "ISP1704 USB Charger Detection"
depends on USB_OTG_UTILS
depends on USB_PHY
help
Say Y to enable support for USB Charger Detection with
ISP1707/ISP1704 USB transceivers.

View File

@ -44,7 +44,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
obj-$(CONFIG_USB_OTG_UTILS) += phy/
obj-$(CONFIG_USB_PHY) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/

View File

@ -1,7 +1,6 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
select USB_OTG_UTILS
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed

View File

@ -195,7 +195,6 @@ config USB_OMAP
tristate "OMAP USB Device Controller"
depends on ARCH_OMAP1
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG
select USB_OTG_UTILS if ARCH_OMAP
help
Many Texas Instruments OMAP processors have flexible full
speed USB device controllers, with support for up to 30
@ -210,7 +209,6 @@ config USB_OMAP
config USB_PXA25X
tristate "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
select USB_OTG_UTILS
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
@ -258,7 +256,6 @@ config USB_RENESAS_USBHS_UDC
config USB_PXA27X
tristate "PXA 27x"
select USB_OTG_UTILS
help
Intel's PXA 27x series XScale ARM v5TE processors include
an integrated full speed USB 1.1 device controller.

View File

@ -300,7 +300,6 @@ config USB_OHCI_HCD
tristate "OHCI HCD support"
depends on USB && USB_ARCH_HAS_OHCI
select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
select USB_OTG_UTILS if ARCH_OMAP
depends on USB_ISP1301 || !ARCH_LPC32XX
---help---
The Open Host Controller Interface (OHCI) is a standard for accessing

View File

@ -7,7 +7,6 @@
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then

View File

@ -3,7 +3,6 @@
#
menuconfig USB_PHY
tristate "USB Physical Layer drivers"
select USB_OTG_UTILS
help
USB controllers (those which are host, device or DRD) need a
device to handle the physical layer signalling, commonly called
@ -13,19 +12,12 @@ menuconfig USB_PHY
if USB_PHY
config USB_OTG_UTILS
bool
help
Select this to make sure the build includes objects from
the OTG infrastructure directory.
#
# USB Transceiver Drivers
#
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
depends on AB8500_CORE
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver in AB8500 chip.
This transceiver supports high and full speed devices plus,
@ -35,14 +27,12 @@ config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
Enable this to support Freescale USB OTG transceiver.
config ISP1301_OMAP
tristate "Philips ISP1301 with OMAP OTG"
depends on I2C && ARCH_OMAP_OTG
select USB_OTG_UTILS
help
If you say yes here you get support for the Philips ISP1301
USB-On-The-Go transceiver working with the OMAP OTG controller.
@ -56,14 +46,12 @@ config ISP1301_OMAP
config MV_U3D_PHY
bool "Marvell USB 3.0 PHY controller Driver"
depends on USB_MV_U3D
select USB_OTG_UTILS
help
Enable this to support Marvell USB 3.0 phy controller for Marvell
SoC.
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_OTG_UTILS
help
This driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any
@ -81,7 +69,6 @@ config OMAP_CONTROL_USB
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
depends on ARCH_OMAP2PLUS
select USB_OTG_UTILS
select OMAP_CONTROL_USB
help
Enable this to support the transceiver that is part of SOC. This
@ -91,7 +78,6 @@ config OMAP_USB2
config OMAP_USB3
tristate "OMAP USB3 PHY Driver"
select USB_OTG_UTILS
select OMAP_CONTROL_USB
help
Enable this to support the USB3 PHY that is part of SOC. This
@ -102,7 +88,6 @@ config OMAP_USB3
config SAMSUNG_USBPHY
bool "Samsung USB PHY controller Driver"
depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS
select USB_OTG_UTILS
help
Enable this to support Samsung USB phy controller for samsung
SoCs.
@ -110,7 +95,6 @@ config SAMSUNG_USBPHY
config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
@ -120,7 +104,6 @@ config TWL4030_USB
config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on TWL6030
family chips. This TWL6030 transceiver has the VBUS and ID GND
@ -132,7 +115,6 @@ config TWL6030_USB
config USB_GPIO_VBUS
tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
depends on GENERIC_GPIO
select USB_OTG_UTILS
help
Provides simple GPIO VBUS sensing for controllers with an
internal transceiver via the usb_phy interface, and
@ -154,7 +136,6 @@ config USB_ISP1301
config USB_MSM_OTG
tristate "OTG support for Qualcomm on-chip USB controller"
depends on (USB || USB_GADGET) && ARCH_MSM
select USB_OTG_UTILS
help
Enable this to support the USB OTG transceiver on MSM chips. It
handles PHY initialization, clock management, and workarounds
@ -168,7 +149,6 @@ config USB_MV_OTG
tristate "Marvell USB OTG support"
depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
select USB_OTG
select USB_OTG_UTILS
help
Say Y here if you want to build Marvell USB OTG transciever
driver in kernel (including PXA and MMP series). This driver
@ -180,7 +160,6 @@ config USB_MXS_PHY
tristate "Freescale MXS USB PHY support"
depends on ARCH_MXC || ARCH_MXS
select STMP_DEVICE
select USB_OTG_UTILS
help
Enable this to support the Freescale MXS USB PHY.
@ -189,7 +168,6 @@ config USB_MXS_PHY
config USB_RCAR_PHY
tristate "Renesas R-Car USB phy support"
depends on USB || USB_GADGET
select USB_OTG_UTILS
help
Say Y here to add support for the Renesas R-Car USB phy driver.
This chip is typically used as USB phy for USB host, gadget.
@ -201,7 +179,6 @@ config USB_RCAR_PHY
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
select USB_OTG_UTILS
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.