i2c-designware: Add support for Designware core behind PCI devices.

Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Dirk Brandewie 2011-10-06 11:26:35 -07:00 committed by Ben Dooks
parent f3fa9f3da5
commit fe20ff5c7e
4 changed files with 329 additions and 0 deletions

View File

@ -360,6 +360,16 @@ config I2C_DESIGNWARE_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
This driver can also be built as a module. If so, the module
will be called i2c-designware-pci.
config I2C_GPIO
tristate "GPIO-based bitbanging I2C"
depends on GENERIC_GPIO

View File

@ -35,6 +35,8 @@ obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o

View File

@ -68,6 +68,7 @@ struct dw_i2c_dev {
struct mutex lock;
struct clk *clk;
u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev);
struct dw_pci_controller *controller;
int cmd_err;
struct i2c_msg *msgs;
int msgs_num;

View File

@ -0,0 +1,316 @@
/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011 Intel corporation.
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
moorestown_0,
moorestown_1,
moorestown_2,
medfield_0,
medfield_1,
medfield_2,
medfield_3,
medfield_4,
medfield_5,
};
struct dw_pci_controller {
u32 bus_num;
u32 bus_cfg;
u32 tx_fifo_depth;
u32 rx_fifo_depth;
u32 clk_khz;
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
static struct dw_pci_controller dw_pci_controllers[] = {
[moorestown_0] = {
.bus_num = 0,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[moorestown_1] = {
.bus_num = 1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[moorestown_2] = {
.bus_num = 2,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_0] = {
.bus_num = 0,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_1] = {
.bus_num = 1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_2] = {
.bus_num = 2,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_3] = {
.bus_num = 3,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_STD,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_4] = {
.bus_num = 4,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
[medfield_5] = {
.bus_num = 5,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
},
};
static struct i2c_algorithm i2c_dw_algo = {
.master_xfer = i2c_dw_xfer,
.functionality = i2c_dw_func,
};
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return dev->controller->clk_khz;
}
static int __devinit i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
unsigned long start, len;
void __iomem *base;
int r;
struct dw_pci_controller *controller;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
printk(KERN_ERR "dw_i2c_pci_probe: invalid driver data %ld\n",
id->driver_data);
return -EINVAL;
}
controller = &dw_pci_controllers[id->driver_data];
r = pci_enable_device(pdev);
if (r) {
dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
r);
goto exit;
}
/* Determine the address of the I2C area */
start = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
if (!start || len == 0) {
dev_err(&pdev->dev, "base address not set\n");
r = -ENODEV;
goto exit;
}
r = pci_request_region(pdev, 0, DRIVER_NAME);
if (r) {
dev_err(&pdev->dev, "failed to request I2C region "
"0x%lx-0x%lx\n", start,
(unsigned long)pci_resource_end(pdev, 0));
goto exit;
}
base = ioremap_nocache(start, len);
if (!base) {
dev_err(&pdev->dev, "I/O memory remapping failed\n");
r = -ENOMEM;
goto err_release_region;
}
dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev) {
r = -ENOMEM;
goto err_release_region;
}
init_completion(&dev->cmd_complete);
mutex_init(&dev->lock);
dev->clk = NULL;
dev->controller = controller;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
dev->base = base;
dev->dev = get_device(&pdev->dev);
dev->functionality =
I2C_FUNC_I2C |
I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_I2C_BLOCK;
dev->master_cfg = controller->bus_cfg;
pci_set_drvdata(pdev, dev);
dev->tx_fifo_depth = controller->tx_fifo_depth;
dev->rx_fifo_depth = controller->rx_fifo_depth;
r = i2c_dw_init(dev);
if (r)
goto err_iounmap;
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
adap->class = 0;
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->nr = controller->bus_num;
snprintf(adap->name, sizeof(adap->name), "i2c-designware-pci-%d",
adap->nr);
r = request_irq(pdev->irq, i2c_dw_isr, IRQF_SHARED, adap->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
goto err_iounmap;
}
i2c_dw_disable_int(dev);
i2c_dw_clear_int(dev);
r = i2c_add_numbered_adapter(adap);
if (r) {
dev_err(&pdev->dev, "failure adding adapter\n");
goto err_free_irq;
}
return 0;
err_free_irq:
free_irq(pdev->irq, dev);
err_iounmap:
iounmap(dev->base);
pci_set_drvdata(pdev, NULL);
put_device(&pdev->dev);
kfree(dev);
err_release_region:
pci_release_region(pdev, 0);
exit:
return r;
}
static void __devexit i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
pci_set_drvdata(pdev, NULL);
i2c_del_adapter(&dev->adapter);
put_device(&pdev->dev);
free_irq(dev->irq, dev);
kfree(dev);
pci_release_region(pdev, 0);
}
/* work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
DEFINE_PCI_DEVICE_TABLE(i2_designware_pci_ids) = {
/* Moorestown */
{ PCI_VDEVICE(INTEL, 0x0802), moorestown_0 },
{ PCI_VDEVICE(INTEL, 0x0803), moorestown_1 },
{ PCI_VDEVICE(INTEL, 0x0804), moorestown_2 },
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0817), medfield_3,},
{ PCI_VDEVICE(INTEL, 0x0818), medfield_4 },
{ PCI_VDEVICE(INTEL, 0x0819), medfield_5 },
{ PCI_VDEVICE(INTEL, 0x082C), medfield_0 },
{ PCI_VDEVICE(INTEL, 0x082D), medfield_1 },
{ PCI_VDEVICE(INTEL, 0x082E), medfield_2 },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
static struct pci_driver dw_i2c_driver = {
.name = DRIVER_NAME,
.id_table = i2_designware_pci_ids,
.probe = i2c_dw_pci_probe,
.remove = __devexit_p(i2c_dw_pci_remove),
};
static int __init dw_i2c_init_driver(void)
{
return pci_register_driver(&dw_i2c_driver);
}
module_init(dw_i2c_init_driver);
static void __exit dw_i2c_exit_driver(void)
{
pci_unregister_driver(&dw_i2c_driver);
}
module_exit(dw_i2c_exit_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
MODULE_LICENSE("GPL");