ps3: reduce allocation size of rx skb buffers

Reduced allocation size for rx skb buffers, from 2308 bytes to
1356 per buffer.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Masakazu Mokuno 2007-07-20 17:39:25 +09:00 committed by Jeff Garzik
parent a3093d9b07
commit fe6d3a4049
2 changed files with 44 additions and 13 deletions

View File

@ -917,31 +917,60 @@ static int gelic_net_decode_one_descr(struct gelic_net_card *card)
goto refill;
}
if ((status != GELIC_NET_DESCR_COMPLETE) &&
(status != GELIC_NET_DESCR_FRAME_END)) {
if (status == GELIC_NET_DESCR_BUFFER_FULL) {
/*
* Buffer full would occur if and only if
* the frame length was longer than the size of this
* descriptor's buffer. If the frame length was equal
* to or shorter than buffer'size, FRAME_END condition
* would occur.
* Anyway this frame was longer than the MTU,
* just drop it.
*/
dev_info(ctodev(card), "overlength frame\n");
goto refill;
}
/*
* descriptoers any other than FRAME_END here should
* be treated as error.
*/
if (status != GELIC_NET_DESCR_FRAME_END) {
dev_dbg(ctodev(card), "RX descriptor with state %x\n",
status);
goto refill;
}
/* ok, we've got a packet in descr */
gelic_net_pass_skb_up(descr, card); /* 1: skb_up sccess */
gelic_net_pass_skb_up(descr, card);
refill:
descr->next_descr_addr = 0; /* unlink the descr */
/*
* So that always DMAC can see the end
* of the descriptor chain to avoid
* from unwanted DMAC overrun.
*/
descr->next_descr_addr = 0;
/* change the descriptor state: */
gelic_net_set_descr_status(descr, GELIC_NET_DESCR_NOT_IN_USE);
/* refill one desc
* FIXME: this can fail, but for now, just leave this
* descriptor without skb
/*
* this call can fail, but for now, just leave this
* decriptor without skb
*/
gelic_net_prepare_rx_descr(card, descr);
chain->head = descr;
chain->tail = descr->next;
/*
* Set this descriptor the end of the chain.
*/
descr->prev->next_descr_addr = descr->bus_addr;
/*
* If dmac chain was met, DMAC stopped.
* thus re-enable it
*/
if (dmac_chain_ended) {
card->rx_dma_restart_required = 1;
dev_dbg(ctodev(card), "reenable rx dma scheduled\n");

View File

@ -32,8 +32,8 @@
#define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */
#define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */
#define GELIC_NET_MAX_MTU 2308
#define GELIC_NET_MIN_MTU 64
#define GELIC_NET_MAX_MTU VLAN_ETH_FRAME_LEN
#define GELIC_NET_MIN_MTU VLAN_ETH_ZLEN
#define GELIC_NET_RXBUF_ALIGN 128
#define GELIC_NET_RX_CSUM_DEFAULT 1 /* hw chksum */
#define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ
@ -81,7 +81,8 @@ enum gelic_net_int1_status {
*/
#define GELIC_NET_RXVLNPKT 0x00200000 /* VLAN packet */
/* bit 20..16 reserved */
#define GELIC_NET_RXRECNUM 0x0000ff00 /* reception receipt number */
#define GELIC_NET_RXRRECNUM 0x0000ff00 /* reception receipt number */
#define GELIC_NET_RXRRECNUM_SHIFT 8
/* bit 7..0 reserved */
#define GELIC_NET_TXDESC_TAIL 0
@ -129,13 +130,14 @@ enum gelic_net_int1_status {
enum gelic_net_descr_status {
GELIC_NET_DESCR_COMPLETE = 0x00, /* used in rx and tx */
GELIC_NET_DESCR_COMPLETE = 0x00, /* used in tx */
GELIC_NET_DESCR_BUFFER_FULL = 0x00, /* used in rx */
GELIC_NET_DESCR_RESPONSE_ERROR = 0x01, /* used in rx and tx */
GELIC_NET_DESCR_PROTECTION_ERROR = 0x02, /* used in rx and tx */
GELIC_NET_DESCR_FRAME_END = 0x04, /* used in rx */
GELIC_NET_DESCR_FORCE_END = 0x05, /* used in rx and tx */
GELIC_NET_DESCR_CARDOWNED = 0x0a, /* used in rx and tx */
GELIC_NET_DESCR_NOT_IN_USE /* any other value */
GELIC_NET_DESCR_NOT_IN_USE = 0x0b /* any other value */
};
/* for lv1_net_control */
#define GELIC_NET_GET_MAC_ADDRESS 0x0000000000000001