mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation
These new helpers + macro definitions are meant to replace the old ones which are unpractical to use. Note that the macros and function prefixes have been intentionally changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that this IP is also embedded in avr32 SoCs (and not only in at91 ones). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
parent
119d53d44c
commit
fe9d7cb22e
|
@ -121,6 +121,10 @@ config MFD_ATMEL_HLCDC
|
||||||
additional drivers must be enabled in order to use the
|
additional drivers must be enabled in order to use the
|
||||||
functionality of the device.
|
functionality of the device.
|
||||||
|
|
||||||
|
config MFD_ATMEL_SMC
|
||||||
|
bool
|
||||||
|
select MFD_SYSCON
|
||||||
|
|
||||||
config MFD_BCM590XX
|
config MFD_BCM590XX
|
||||||
tristate "Broadcom BCM590xx PMUs"
|
tristate "Broadcom BCM590xx PMUs"
|
||||||
select MFD_CORE
|
select MFD_CORE
|
||||||
|
|
|
@ -185,6 +185,7 @@ obj-$(CONFIG_MFD_TPS65090) += tps65090.o
|
||||||
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
|
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
|
||||||
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
|
obj-$(CONFIG_MFD_ATMEL_FLEXCOM) += atmel-flexcom.o
|
||||||
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
|
obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
|
||||||
|
obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o
|
||||||
obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
|
obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
|
||||||
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
|
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
|
||||||
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
|
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
|
||||||
|
|
|
@ -0,0 +1,314 @@
|
||||||
|
/*
|
||||||
|
* Atmel SMC (Static Memory Controller) helper functions.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Atmel
|
||||||
|
* Copyright (C) 2017 Free Electrons
|
||||||
|
*
|
||||||
|
* Author: Boris Brezillon <boris.brezillon@free-electrons.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as
|
||||||
|
* published by the Free Software Foundation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/mfd/syscon/atmel-smc.h>
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_init - initialize a SMC CS conf
|
||||||
|
* @conf: the SMC CS conf to initialize
|
||||||
|
*
|
||||||
|
* Set all fields to 0 so that one can start defining a new config.
|
||||||
|
*/
|
||||||
|
void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf)
|
||||||
|
{
|
||||||
|
memset(conf, 0, sizeof(*conf));
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
|
||||||
|
* format expected by the SMC engine
|
||||||
|
* @ncycles: number of MCK clk cycles
|
||||||
|
* @msbpos: position of the MSB part of the timing field
|
||||||
|
* @msbwidth: width of the MSB part of the timing field
|
||||||
|
* @msbfactor: factor applied to the MSB
|
||||||
|
* @encodedval: param used to store the encoding result
|
||||||
|
*
|
||||||
|
* This function encodes the @ncycles value as described in the datasheet
|
||||||
|
* (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic
|
||||||
|
* helper which called with different parameter depending on the encoding
|
||||||
|
* scheme.
|
||||||
|
*
|
||||||
|
* If the @ncycles value is too big to be encoded, -ERANGE is returned and
|
||||||
|
* the encodedval is contains the maximum val. Otherwise, 0 is returned.
|
||||||
|
*/
|
||||||
|
static int atmel_smc_cs_encode_ncycles(unsigned int ncycles,
|
||||||
|
unsigned int msbpos,
|
||||||
|
unsigned int msbwidth,
|
||||||
|
unsigned int msbfactor,
|
||||||
|
unsigned int *encodedval)
|
||||||
|
{
|
||||||
|
unsigned int lsbmask = GENMASK(msbpos - 1, 0);
|
||||||
|
unsigned int msbmask = GENMASK(msbwidth - 1, 0);
|
||||||
|
unsigned int msb, lsb;
|
||||||
|
int ret = 0;
|
||||||
|
|
||||||
|
msb = ncycles / msbfactor;
|
||||||
|
lsb = ncycles % msbfactor;
|
||||||
|
|
||||||
|
if (lsb > lsbmask) {
|
||||||
|
lsb = 0;
|
||||||
|
msb++;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Let's just put the maximum we can if the requested setting does
|
||||||
|
* not fit in the register field.
|
||||||
|
* We still return -ERANGE in case the caller cares.
|
||||||
|
*/
|
||||||
|
if (msb > msbmask) {
|
||||||
|
msb = msbmask;
|
||||||
|
lsb = lsbmask;
|
||||||
|
ret = -ERANGE;
|
||||||
|
}
|
||||||
|
|
||||||
|
*encodedval = (msb << msbpos) | lsb;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a
|
||||||
|
* specific value
|
||||||
|
* @conf: SMC CS conf descriptor
|
||||||
|
* @shift: the position of the Txx field in the TIMINGS register
|
||||||
|
* @ncycles: value (expressed in MCK clk cycles) to assign to this Txx
|
||||||
|
* parameter
|
||||||
|
*
|
||||||
|
* This function encodes the @ncycles value as described in the datasheet
|
||||||
|
* (section "SMC Timings Register"), and then stores the result in the
|
||||||
|
* @conf->timings field at @shift position.
|
||||||
|
*
|
||||||
|
* Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in
|
||||||
|
* the field, and 0 otherwise.
|
||||||
|
*/
|
||||||
|
int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles)
|
||||||
|
{
|
||||||
|
unsigned int val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT &&
|
||||||
|
shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT &&
|
||||||
|
shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT &&
|
||||||
|
shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT &&
|
||||||
|
shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The formula described in atmel datasheets (section "HSMC Timings
|
||||||
|
* Register"):
|
||||||
|
*
|
||||||
|
* ncycles = (Txx[3] * 64) + Txx[2:0]
|
||||||
|
*/
|
||||||
|
ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val);
|
||||||
|
conf->timings &= ~GENMASK(shift + 3, shift);
|
||||||
|
conf->timings |= val << shift;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a
|
||||||
|
* specific value
|
||||||
|
* @conf: SMC CS conf descriptor
|
||||||
|
* @shift: the position of the xx_SETUP field in the SETUP register
|
||||||
|
* @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP
|
||||||
|
* parameter
|
||||||
|
*
|
||||||
|
* This function encodes the @ncycles value as described in the datasheet
|
||||||
|
* (section "SMC Setup Register"), and then stores the result in the
|
||||||
|
* @conf->setup field at @shift position.
|
||||||
|
*
|
||||||
|
* Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
|
||||||
|
* the field, and 0 otherwise.
|
||||||
|
*/
|
||||||
|
int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles)
|
||||||
|
{
|
||||||
|
unsigned int val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
|
||||||
|
shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The formula described in atmel datasheets (section "SMC Setup
|
||||||
|
* Register"):
|
||||||
|
*
|
||||||
|
* ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0]
|
||||||
|
*/
|
||||||
|
ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val);
|
||||||
|
conf->setup &= ~GENMASK(shift + 7, shift);
|
||||||
|
conf->setup |= val << shift;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a
|
||||||
|
* specific value
|
||||||
|
* @conf: SMC CS conf descriptor
|
||||||
|
* @shift: the position of the xx_PULSE field in the PULSE register
|
||||||
|
* @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE
|
||||||
|
* parameter
|
||||||
|
*
|
||||||
|
* This function encodes the @ncycles value as described in the datasheet
|
||||||
|
* (section "SMC Pulse Register"), and then stores the result in the
|
||||||
|
* @conf->setup field at @shift position.
|
||||||
|
*
|
||||||
|
* Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
|
||||||
|
* the field, and 0 otherwise.
|
||||||
|
*/
|
||||||
|
int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles)
|
||||||
|
{
|
||||||
|
unsigned int val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
|
||||||
|
shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The formula described in atmel datasheets (section "SMC Pulse
|
||||||
|
* Register"):
|
||||||
|
*
|
||||||
|
* ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0]
|
||||||
|
*/
|
||||||
|
ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val);
|
||||||
|
conf->pulse &= ~GENMASK(shift + 7, shift);
|
||||||
|
conf->pulse |= val << shift;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a
|
||||||
|
* specific value
|
||||||
|
* @conf: SMC CS conf descriptor
|
||||||
|
* @shift: the position of the xx_CYCLE field in the CYCLE register
|
||||||
|
* @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE
|
||||||
|
* parameter
|
||||||
|
*
|
||||||
|
* This function encodes the @ncycles value as described in the datasheet
|
||||||
|
* (section "SMC Pulse Register"), and then stores the result in the
|
||||||
|
* @conf->setup field at @shift position.
|
||||||
|
*
|
||||||
|
* Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
|
||||||
|
* the field, and 0 otherwise.
|
||||||
|
*/
|
||||||
|
int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles)
|
||||||
|
{
|
||||||
|
unsigned int val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The formula described in atmel datasheets (section "SMC Cycle
|
||||||
|
* Register"):
|
||||||
|
*
|
||||||
|
* ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0]
|
||||||
|
*/
|
||||||
|
ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val);
|
||||||
|
conf->cycle &= ~GENMASK(shift + 15, shift);
|
||||||
|
conf->cycle |= val << shift;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_apply - apply an SMC CS conf
|
||||||
|
* @regmap: the SMC regmap
|
||||||
|
* @cs: the CS id
|
||||||
|
* @conf the SMC CS conf to apply
|
||||||
|
*
|
||||||
|
* Applies an SMC CS configuration.
|
||||||
|
* Only valid on at91sam9/avr32 SoCs.
|
||||||
|
*/
|
||||||
|
void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
|
||||||
|
const struct atmel_smc_cs_conf *conf)
|
||||||
|
{
|
||||||
|
regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup);
|
||||||
|
regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse);
|
||||||
|
regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle);
|
||||||
|
regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_hsmc_cs_conf_apply - apply an SMC CS conf
|
||||||
|
* @regmap: the HSMC regmap
|
||||||
|
* @cs: the CS id
|
||||||
|
* @conf the SMC CS conf to apply
|
||||||
|
*
|
||||||
|
* Applies an SMC CS configuration.
|
||||||
|
* Only valid on post-sama5 SoCs.
|
||||||
|
*/
|
||||||
|
void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
|
||||||
|
const struct atmel_smc_cs_conf *conf)
|
||||||
|
{
|
||||||
|
regmap_write(regmap, ATMEL_HSMC_SETUP(cs), conf->setup);
|
||||||
|
regmap_write(regmap, ATMEL_HSMC_PULSE(cs), conf->pulse);
|
||||||
|
regmap_write(regmap, ATMEL_HSMC_CYCLE(cs), conf->cycle);
|
||||||
|
regmap_write(regmap, ATMEL_HSMC_TIMINGS(cs), conf->timings);
|
||||||
|
regmap_write(regmap, ATMEL_HSMC_MODE(cs), conf->mode);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_smc_cs_conf_get - retrieve the current SMC CS conf
|
||||||
|
* @regmap: the SMC regmap
|
||||||
|
* @cs: the CS id
|
||||||
|
* @conf: the SMC CS conf object to store the current conf
|
||||||
|
*
|
||||||
|
* Retrieve the SMC CS configuration.
|
||||||
|
* Only valid on at91sam9/avr32 SoCs.
|
||||||
|
*/
|
||||||
|
void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
|
||||||
|
struct atmel_smc_cs_conf *conf)
|
||||||
|
{
|
||||||
|
regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup);
|
||||||
|
regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse);
|
||||||
|
regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle);
|
||||||
|
regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
|
||||||
|
* @regmap: the HSMC regmap
|
||||||
|
* @cs: the CS id
|
||||||
|
* @conf: the SMC CS conf object to store the current conf
|
||||||
|
*
|
||||||
|
* Retrieve the SMC CS configuration.
|
||||||
|
* Only valid on post-sama5 SoCs.
|
||||||
|
*/
|
||||||
|
void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
|
||||||
|
struct atmel_smc_cs_conf *conf)
|
||||||
|
{
|
||||||
|
regmap_read(regmap, ATMEL_HSMC_SETUP(cs), &conf->setup);
|
||||||
|
regmap_read(regmap, ATMEL_HSMC_PULSE(cs), &conf->pulse);
|
||||||
|
regmap_read(regmap, ATMEL_HSMC_CYCLE(cs), &conf->cycle);
|
||||||
|
regmap_read(regmap, ATMEL_HSMC_TIMINGS(cs), &conf->timings);
|
||||||
|
regmap_read(regmap, ATMEL_HSMC_MODE(cs), &conf->mode);
|
||||||
|
}
|
||||||
|
EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
|
|
@ -69,6 +69,93 @@
|
||||||
#define AT91_SMC_PS_16 (2 << 28)
|
#define AT91_SMC_PS_16 (2 << 28)
|
||||||
#define AT91_SMC_PS_32 (3 << 28)
|
#define AT91_SMC_PS_32 (3 << 28)
|
||||||
|
|
||||||
|
#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10))
|
||||||
|
#define ATMEL_HSMC_SETUP(cs) (0x600 + ((cs) * 0x14))
|
||||||
|
#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4)
|
||||||
|
#define ATMEL_HSMC_PULSE(cs) (0x600 + ((cs) * 0x14) + 0x4)
|
||||||
|
#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8)
|
||||||
|
#define ATMEL_HSMC_CYCLE(cs) (0x600 + ((cs) * 0x14) + 0x8)
|
||||||
|
#define ATMEL_SMC_NWE_SHIFT 0
|
||||||
|
#define ATMEL_SMC_NCS_WR_SHIFT 8
|
||||||
|
#define ATMEL_SMC_NRD_SHIFT 16
|
||||||
|
#define ATMEL_SMC_NCS_RD_SHIFT 24
|
||||||
|
|
||||||
|
#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc)
|
||||||
|
#define ATMEL_HSMC_MODE(cs) (0x600 + ((cs) * 0x14) + 0x10)
|
||||||
|
#define ATMEL_SMC_MODE_READMODE_MASK BIT(0)
|
||||||
|
#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0)
|
||||||
|
#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0)
|
||||||
|
#define ATMEL_SMC_MODE_WRITEMODE_MASK BIT(1)
|
||||||
|
#define ATMEL_SMC_MODE_WRITEMODE_NCS (0 << 1)
|
||||||
|
#define ATMEL_SMC_MODE_WRITEMODE_NWE (1 << 1)
|
||||||
|
#define ATMEL_SMC_MODE_EXNWMODE_MASK GENMASK(5, 4)
|
||||||
|
#define ATMEL_SMC_MODE_EXNWMODE_DISABLE (0 << 4)
|
||||||
|
#define ATMEL_SMC_MODE_EXNWMODE_FROZEN (2 << 4)
|
||||||
|
#define ATMEL_SMC_MODE_EXNWMODE_READY (3 << 4)
|
||||||
|
#define ATMEL_SMC_MODE_BAT_MASK BIT(8)
|
||||||
|
#define ATMEL_SMC_MODE_BAT_SELECT (0 << 8)
|
||||||
|
#define ATMEL_SMC_MODE_BAT_WRITE (1 << 8)
|
||||||
|
#define ATMEL_SMC_MODE_DBW_MASK GENMASK(13, 12)
|
||||||
|
#define ATMEL_SMC_MODE_DBW_8 (0 << 12)
|
||||||
|
#define ATMEL_SMC_MODE_DBW_16 (1 << 12)
|
||||||
|
#define ATMEL_SMC_MODE_DBW_32 (2 << 12)
|
||||||
|
#define ATMEL_SMC_MODE_TDF_MASK GENMASK(19, 16)
|
||||||
|
#define ATMEL_SMC_MODE_TDF(x) (((x) - 1) << 16)
|
||||||
|
#define ATMEL_SMC_MODE_TDF_MAX 16
|
||||||
|
#define ATMEL_SMC_MODE_TDF_MIN 1
|
||||||
|
#define ATMEL_SMC_MODE_TDFMODE_OPTIMIZED BIT(20)
|
||||||
|
#define ATMEL_SMC_MODE_PMEN BIT(24)
|
||||||
|
#define ATMEL_SMC_MODE_PS_MASK GENMASK(29, 28)
|
||||||
|
#define ATMEL_SMC_MODE_PS_4 (0 << 28)
|
||||||
|
#define ATMEL_SMC_MODE_PS_8 (1 << 28)
|
||||||
|
#define ATMEL_SMC_MODE_PS_16 (2 << 28)
|
||||||
|
#define ATMEL_SMC_MODE_PS_32 (3 << 28)
|
||||||
|
|
||||||
|
#define ATMEL_HSMC_TIMINGS(cs) (0x600 + ((cs) * 0x14) + 0xc)
|
||||||
|
#define ATMEL_HSMC_TIMINGS_OCMS BIT(12)
|
||||||
|
#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28)
|
||||||
|
#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31)
|
||||||
|
#define ATMEL_HSMC_TIMINGS_TCLR_SHIFT 0
|
||||||
|
#define ATMEL_HSMC_TIMINGS_TADL_SHIFT 4
|
||||||
|
#define ATMEL_HSMC_TIMINGS_TAR_SHIFT 8
|
||||||
|
#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16
|
||||||
|
#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24
|
||||||
|
|
||||||
|
/**
|
||||||
|
* struct atmel_smc_cs_conf - SMC CS config as described in the datasheet.
|
||||||
|
* @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200)
|
||||||
|
* @pulse: NCS/NWE/NRD pulse timings (not applicable to at91rm9200)
|
||||||
|
* @cycle: NWE/NRD cycle timings (not applicable to at91rm9200)
|
||||||
|
* @timings: advanced NAND related timings (only applicable to HSMC)
|
||||||
|
* @mode: all kind of config parameters (see the fields definition above).
|
||||||
|
* The mode fields are different on at91rm9200
|
||||||
|
*/
|
||||||
|
struct atmel_smc_cs_conf {
|
||||||
|
u32 setup;
|
||||||
|
u32 pulse;
|
||||||
|
u32 cycle;
|
||||||
|
u32 timings;
|
||||||
|
u32 mode;
|
||||||
|
};
|
||||||
|
|
||||||
|
void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf);
|
||||||
|
int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift,
|
||||||
|
unsigned int ncycles);
|
||||||
|
int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles);
|
||||||
|
int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles);
|
||||||
|
int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
|
||||||
|
unsigned int shift, unsigned int ncycles);
|
||||||
|
void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
|
||||||
|
const struct atmel_smc_cs_conf *conf);
|
||||||
|
void atmel_hsmc_cs_conf_apply(struct regmap *regmap, int cs,
|
||||||
|
const struct atmel_smc_cs_conf *conf);
|
||||||
|
void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
|
||||||
|
struct atmel_smc_cs_conf *conf);
|
||||||
|
void atmel_hsmc_cs_conf_get(struct regmap *regmap, int cs,
|
||||||
|
struct atmel_smc_cs_conf *conf);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* This function converts a setup timing expressed in nanoseconds into an
|
* This function converts a setup timing expressed in nanoseconds into an
|
||||||
|
|
Loading…
Reference in New Issue