Commit Graph

39 Commits

Author SHA1 Message Date
Stephen Boyd 881f0fcef9 EDAC: Don't try to cancel workqueue when it's never setup
We only setup a workqueue for edac devices that use the polling
method. We still try to cancel the workqueue if an edac_device
uses the irq method though. This causes a warning from debug
objects when we remove an edac device:

WARNING: CPU: 0 PID: 56 at lib/debugobjects.c:260 debug_print_object+0x98/0xc0()
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: stub_timer+0x0/0x28
Modules linked in: krait_edac(-)
CPU: 0 PID: 56 Comm: rmmod Not tainted 3.12.0-rc2-00035-g15292a0 #69
(unwind_backtrace+0x0/0x144)
(show_stack+0x20/0x24)
(dump_stack+0x74/0xb4)
(warn_slowpath_common+0x78/0x9c)
(warn_slowpath_fmt+0x40/0x48)
(debug_print_object+0x98/0xc0)
(debug_object_assert_init+0xdc/0xec)
(del_timer+0x24/0x7c)
(try_to_grab_pending+0xc0/0x1b0)
(cancel_delayed_work+0x2c/0xa0)
(edac_device_workq_teardown+0x1c/0x38)
(edac_device_del_device+0xb8/0xe4)
(krait_edac_remove+0x50/0x70 [krait_edac])
(platform_drv_remove+0x24/0x28)
(__device_release_driver+0x68/0xc0)
(driver_detach+0xc4/0xc8)
(bus_remove_driver+0xac/0x114)
(driver_unregister+0x38/0x58)
(platform_driver_unregister+0x1c/0x20)
(krait_edac_driver_exit+0x14/0x1c [krait_edac])
(SyS_delete_module+0x178/0x2b4)

Fix it by skipping the workqueue teardown for such devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Link: http://lkml.kernel.org/r/1388434457-4194-2-git-send-email-sboyd@codeaurora.org
Signed-off-by: Borislav Petkov <bp@suse.de>
2014-01-10 15:57:36 +01:00
Robert Richter 7270a6085a edac: Unify reporting of device info for device, mc and pci
Log messages slightly differ between edac subsystems. Unifying it.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Robert Richter <rric@kernel.org>
2013-11-04 17:01:09 -06:00
Mauro Carvalho Chehab c2078e4c91 Merge branch 'devel'
* devel: (33 commits)
  edac i5000, i5400: fix pointer math in i5000_get_mc_regs()
  edac: allow specifying the error count with fake_inject
  edac: add support for Calxeda highbank L2 cache ecc
  edac: add support for Calxeda highbank memory controller
  edac: create top-level debugfs directory
  sb_edac: properly handle error count
  i7core_edac: properly handle error count
  edac: edac_mc_handle_error(): add an error_count parameter
  edac: remove arch-specific parameter for the error handler
  amd64_edac: Don't pass driver name as an error parameter
  edac_mc: check for allocation failure in edac_mc_alloc()
  edac: Increase version to 3.0.0
  edac_mc: Cleanup per-dimm_info debug messages
  edac: Convert debugfX to edac_dbg(X,
  edac: Use more normal debugging macro style
  edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
  Edac: Add ABI Documentation for the new device nodes
  edac: move documentation ABI to ABI/testing/sysfs-devices-edac
  i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy
  edac: change the mem allocation scheme to make Documentation/kobject.txt happy
  ...
2012-07-29 21:11:05 -03:00
Joe Perches 956b9ba156 edac: Convert debugfX to edac_dbg(X,
Use a more common debugging style.

Remove __FILE__ uses, add missing newlines,
coalesce formats and align arguments.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:49 -03:00
Mauro Carvalho Chehab dd23cd6eb1 edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs
The debug macro already adds that. Most of the work here was
made by this small script:

$f .=$_ while (<>);

$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*": /\1"/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*/\1/g;
$f =~ s/(debugf[0-9]\s*\(\s*)__FILE__\s*"MC: /\1"/g;

$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\")\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+)__func__\s*\,\s*/\1\2/g;
$f =~ s/(debugf[0-9]\s*\(\"MC\:\s*)\%s[\:\,\(\)]*\s*([^\"]*\s*[^\)]+),\s*__func__\s*\)/\1\2)/g;

$f =~ s/\"MC\: \\n\"/"MC:\\n"/g;

print $f;

After running the script, manual cleanups were done to fix it the remaining
places.

While here, removed the __LINE__ on most places, as it doesn't actually give
useful info on most places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 13:23:47 -03:00
Linus Torvalds 87a5af24e5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC internal API changes from Mauro Carvalho Chehab:
 "This changeset is the first part of a series of patches that fixes the
  EDAC sybsystem.  On this set, it changes the Kernel EDAC API in order
  to properly represent the Intel i3/i5/i7, Xeon 3xxx/5xxx/7xxx, and
  Intel E5-xxxx memory controllers.

  The EDAC core used to assume that:

       - the DRAM chip select pin is directly accessed by the memory
         controller

       - when multiple channels are used, they're all filled with the
         same type of memory.

  None of the above premises is true on Intel memory controllers since
  2002, when RAMBUS and FB-DIMMs were introduced, and Advanced Memory
  Buffer or by some similar technologies hides the direct access to the
  DRAM pins.

  So, the existing drivers for those chipsets had to lie to the EDAC
  core, in general telling that just one channel is filled.  That
  produces some hard to understand error messages like:

       EDAC MC0: CE row 3, channel 0, label "DIMM1": 1 Unknown error(s): memory read error on FATAL area : cpu=0 Err=0008:00c2 (ch=2), addr = 0xad1f73480 => socket=0, Channel=0(mask=2), rank=1

  The location information there (row3 channel 0) is completely bogus:
  it has no physical meaning, and are just some random values that the
  driver uses to talk with the EDAC core.  The error actually happened
  at CPU socket 0, channel 0, slot 1, but this is not reported anywhere,
  as the EDAC core doesn't know anything about the memory layout.  So,
  only advanced users that know how the EDAC driver works and that tests
  their systems to see how DIMMs are mapped can actually benefit for
  such error logs.

  This patch series fixes the error report logic, in order to allow the
  EDAC to expose the memory architecture used by them to the EDAC core.
  So, as the EDAC core now understands how the memory is organized, it
  can provide an useful report:

       EDAC MC0: CE memory read error on DIMM1 (channel:0 slot:1 page:0x364b1b offset:0x600 grain:32 syndrome:0x0 - count:1 area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:4)

  The location of the DIMM where the error happened is reported by "MC0"
  (cpu socket #0), at "channel:0 slot:1" location, and matches the
  physical location of the DIMM.

  There are two remaining issues not covered by this patch series:

       - The EDAC sysfs API will still report bogus values.  So,
         userspace tools like edac-utils will still use the bogus data;

       - Add a new tracepoint-based way to get the binary information
         about the errors.

  Those are on a second series of patches (also at -next), but will
  probably miss the train for 3.5, due to the slow review process."

Fix up trivial conflict (due to spelling correction of removed code) in
drivers/edac/edac_device.c

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (42 commits)
  i7core: fix ranks information at the per-channel struct
  i5000: Fix the fatal error handling
  i5100_edac: Fix a warning when compiled with 32 bits
  i82975x_edac: Test nr_pages earlier to save a few CPU cycles
  e752x_edac: provide more info about how DIMMS/ranks are mapped
  i5000_edac: Fix the logic that retrieves memory information
  i5400_edac: improve debug messages to better represent the filled memory
  edac: Cleanup the logs for i7core and sb edac drivers
  edac: Initialize the dimm label with the known information
  edac: Remove the legacy EDAC ABI
  x38_edac: convert driver to use the new edac ABI
  tile_edac: convert driver to use the new edac ABI
  sb_edac: convert driver to use the new edac ABI
  r82600_edac: convert driver to use the new edac ABI
  ppc4xx_edac: convert driver to use the new edac ABI
  pasemi_edac: convert driver to use the new edac ABI
  mv64x60_edac: convert driver to use the new edac ABI
  mpc85xx_edac: convert driver to use the new edac ABI
  i82975x_edac: convert driver to use the new edac ABI
  i82875p_edac: convert driver to use the new edac ABI
  ...
2012-05-29 18:32:37 -07:00
Mauro Carvalho Chehab 93e4fe64ec edac: rewrite edac_align_ptr()
The edac_align_ptr() function is used to prepare data for a single
memory allocation kzalloc() call. It counts how many bytes are needed
by some data structure.

Using it as-is is not that trivial, as the quantity of memory elements
reserved is not there, but, instead, it is on a next call.

In order to avoid mistakes when using it, move the number of allocated
elements into it, making easier to use it.

Reviewed-by: Borislav Petkov <bp@amd64.org>
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-28 19:10:59 -03:00
Jiri Kosina f70d4a95ed edac, mips: don't change code that has been removed in edac/mips tree
This is a partial revert of

	15ed103a98 ("edac: Fix spelling errors")
	6997991ab0 ("mips: Fix printk typos in arc/mips")

which change code that doesn't exist any more in edac/mips trees.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-22 11:00:09 +02:00
David Mackey 15ed103a98 edac: Fix spelling errors.
Signed-off-by: David Mackey <tdmackey@twitter.com>
Signed-off-by: Vinson Lee <vlee@twitter.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-30 13:28:41 +02:00
Kay Sievers fe5ff8b84c edac: convert sysdev_class to a regular subsystem
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.

Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-14 15:21:07 -08:00
Lai Jiangshan e2e7709876 edac,rcu: use synchronize_rcu() instead of call_rcu()+rcu_barrier()
synchronize_rcu() does the stuff as needed.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26 17:12:37 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Jesper Dangaard Brouer 458e5ff13e edac: core: remove completion-wait for complete with rcu_barrier
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c
and edac_pci.c.

They all use a wait_for_completion() scheme, but this scheme it not 100%
safe on multiple CPUs.  See the _rcu_barrier() implementation which
explains why extra precausion is needed.

The patch adds a comment about rcu_barrier() and as a precausion calls
rcu_barrier().  A maintainer needs to look at removing the
wait_for_completion code.

[dougthompson@xmission.com: remove the wait_for_completion code]
Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:21:05 -07:00
Harry Ciao 1dc9b70d7d edac: add edac_device_alloc_index()
Add edac_device_alloc_index(), because for MAPLE platform there may
exist several EDAC driver modules that could make use of
edac_device_ctl_info structure at the same time. The index allocation
for these structures should be taken care of by EDAC core.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:56 -07:00
Jean Delvare fbeb438474 edac: use to_delayed_work()
The edac-core driver includes code which assumes that the work_struct
which is included in every delayed_work is the first member of that
structure.  This is currently the case but might change in the future, so
use to_delayed_work() instead, which doesn't make such an assumption.

linux-2.6.30-rc1 has the to_delayed_work() function that will allow this
patch to work

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:34 -07:00
Kay Sievers 281efb17d8 edac: struct device: replace bus_id with dev_name(), dev_set_name()
This patch is part of a larger patch series which will remove the "char
bus_id[20]" name string from struct device.  The device name is managed in
the kobject anyway, and without any size limitation, and just needlessly
copied into "struct device".

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:30 -08:00
Harry Ciao d519c8d9cc edac: fix edac core deadlock when removing a device
When deleting an edac device, we have to wait for its edac_dev.work to be
completed before deleting the whole edac_dev structure.  Since we have no
idea which work in current edac_poller's workqueue is the work we are
conerned about, we wait for all work in the edac_poller's workqueue to be
proceseed.  This is done via flush_cpu_workqueue() which inserts a
wq_barrier into the tail of the workqueue and then sleeping on the
completion of this wq_barrier.  The edac_poller will wake up sleepers when
it is found.

EDAC core creates only one kernel worker thread, edac_poller, to run the
works of all current edac devices.  They share the same callback function
of edac_device_workq_function(), which would grab the mutex of
device_ctls_mutex first before it checks the device.  This is exactly
where edac_poller and rmmod would have a great chance to deadlock.

In below call trace of rmmod > ... >
edac_device_del_device >
edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue,

device_ctls_mutex would have already been grabbed by
edac_device_del_device().  So, on one hand rmmod would sleep on the
completion of a wq_barrier, holding device_ctls_mutex; on the other hand
edac_poller would be blocked on the same mutex when it's running any one
of works of existing edac evices(Note, this edac_dev.work is likely to be
totally irrelevant to the one that is being removed right now)and never
would have a chance to run the work of above wq_barrier to wake rmmod up.

edac_device_workq_teardown() should not be called within the critical
region of device_ctls_mutex.  Just like is done in edac_pci_del_device()
and edac_mc_del_mc(), where edac_pci_workq_teardown() and
edac_mc_workq_teardown() are called after related mutex are released.

Moreover, an edac_dev.work should check first if it is being removed.  If
this is the case, then it should bail out immediately.  Since not all of
existing edac devices are to be removed, this "shutting flag" should be
contained to edac device being removed.  The current edac_dev.op_state can
be used to serve this purpose.

The original deadlock problem and the solution have been witnessed and
tested on actual hardware.  Without the solution, rmmod an edac driver
would result in below deadlock:

root@localhost:/root> rmmod mv64x60_edac
EDAC DEBUG: mv64x60_dma_err_remove()
EDAC DEBUG: edac_device_del_device()
EDAC DEBUG: find_edac_device_by_dev()

(hang for a moment)

INFO: task edac-poller:2030 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
edac-poller   D 00000000     0  2030      2
Call Trace:
[df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable)
[df159e80] [c000a024] __switch_to+0x6c/0xa0
[df159ea0] [c03587d8] schedule+0x2f4/0x4d8
[df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174
[df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core]
[df159f60] [c003beb4] run_workqueue+0x114/0x218
[df159f90] [c003c674] worker_thread+0x5c/0xc8
[df159fd0] [c004106c] kthread+0x5c/0xa0
[df159ff0] [c0013538] original_kernel_thread+0x44/0x60
INFO: task rmmod:2062 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
rmmod         D 0ff2c9fc     0  2062   1839
Call Trace:
[df119c00] [c0437a74] 0xc0437a74 (unreliable)
[df119cc0] [c000a024] __switch_to+0x6c/0xa0
[df119ce0] [c03587d8] schedule+0x2f4/0x4d8
[df119d40] [c03591dc] schedule_timeout+0xb0/0xf4

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23 15:58:21 -08:00
Stephen Rothwell 17aa7e0344 dev_name introduction fall out fix
Commit 06916639e2 ("driver-core: add
dev_name() to help transition away from using bus_id") added a static
inline dev_name() and used it in dev_printk.

Unfortunately, drivers/edac/edac_core.h defines a macro called
dev_name().  Rename the latter.

Diagnosis by Tony Breeds and Michael Ellerman.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-05 15:08:38 -07:00
Adrian Bunk 1a45027d1a edac: remove unneeded functions and add static accessor
Collection of patches, merged into one, from Adrian that do the following:

1) This patch makes the following needlessly global functions static:
- edac_pci_get_log_pe()
- edac_pci_get_log_npe()
- edac_pci_get_panic_on_pe()
- edac_pci_unregister_sysfs_instance_kobj()
- edac_pci_main_kobj_setup()

2) Remove unneeded function edac_device_find()

3) Added #if 0 around function  edac_pci_find()

4) make the needlessly global edac_pci_generic_check() static

5) Removed function edac_check_mc_devices()

Doug Thompson modified Adrian's patches, to bettern represent
the direction of EDAC, and make them one patch.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:26 -07:00
Robert P. J. Day ff6ac2a616 edac: use the shorter LIST_HEAD for brevity
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:26 -07:00
Anton Blanchard c2ae24cfd1 drivers-edac: use round_jiffies_relative
When rounding a relative timeout we need to use round_jiffies_relative().

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:23 -08:00
Doug Thompson 56e61a9c5f drivers-edac: turn on edac device error logging
ENABLE the 'logging' of CE and UE events for the EDAC_DEVICE class of error
harvester in EDAC

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:42:23 -08:00
Doug Thompson b2a4ac0c28 drivers/edac: fix edac_device sysfs corner case bug
Some simple fixes to properly reference counter values from the block
attribute level of edac_device objects.  Properly sequencing the array pointer
was added, resulting in correct identification of block level attributes from
their base class functions.

Added more verbose debug statement for event tracking.

Also during some corner testing, found a bug in the store/show sequence
of operations for the block attribute/controls management.

An old intermediate structure for 'blocks' was still in the processing
pipeline.  This patch removes that old structure and correctly utilizes the
new struct edac_dev_sysfs_block_attribute for passing control from the sysfs
to the low level store/show function of the edac driver.

Now the proper kobj pointer to passed downward to the store/show
functions.

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:57 -07:00
Doug Thompson bf52fa4a26 drivers/edac: fix workq reset deadlock
Fix mutex locking deadlock on the device controller linked list.  Was calling
a lock then a function that could call the same lock.  Moved the cancel workq
function to outside the lock

Added some short circuit logic in the workq code

Added comments of description

Code tidying

Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:57 -07:00
Douglas Thompson 1c3631ff1f drivers/edac: fix edac_device sysfs completion code
With feedback, this patch corrects operation of the kobject release operation
on kobjects, attributes and controls for the edac_device.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:57 -07:00
Doug Thompson d45e7823ba drivers/edac: fix edac_device init apis
Refactoring of sysfs code necessitated the refactoring of the
edac_device_alloc() and edac_device_add_device() apis, of moving the index
value to the alloc() function.  This patch alters the in tree drivers to
utilize this new api signature.

Having the index value performed later created a chicken-and-the-egg issue.
Moving it to the alloc() function allows for creating the necessary sysfs
entries with the proper index number

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:57 -07:00
Douglas Thompson fd309a9d8e drivers/edac: fix leaf sysfs attribute
This patch fixes and enhances the driver level set of sysfs attributes that
can be added to the 'block' level of an edac_device type of driver.

There is a controller information structure, which contains one or more
instances of device.  Each instance will have one or more blocks of device
specific counters.  This patch fixes the ability to have more detailed
attributes/controls for each of the 'blocks', providing for the addition of
controls/attributes from the low level driver to user space via sysfs.

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:56 -07:00
Doug Thompson 0ca84761fa drivers/edac: fix edac_device semaphore to mutex
A previous patch changed the edac_mc src file from semaphore usage to mutex
This patch changes the edac_device src file as well, from semaphore use to
mutex operation.

Use a mutex primitive for mutex operations, as it does not require a
semaphore

Cc: Alan Cox alan@lxorguk.ukuu.org.uk
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:56 -07:00
Douglas Thompson 494d0d55bc drivers/edac: mod edac_opt_state_to_string function
Refactored the function edac_op_state_toString() to be edac_op_state_to_string()
for consistent style, and its callers

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:56 -07:00
Douglas Thompson 7391c6dcab drivers/edac: mod edac_align_ptr function
Refactor the edac_align_ptr() function to reduce the noise of casting the
aligned pointer to the various types of data objects and modified its callers
to its new signature

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:56 -07:00
Douglas Thompson 52490c8d07 drivers/edac: edac_device code tidying
For the file edac_device.c perform some coding style enhancements
Add some function header comments
Made for better readability commands

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:55 -07:00
Douglas Thompson 052dfb45cc drivers/edac: cleanup spaces-gotos after Lindent messup
This patch fixes some remnant spaces inserted by the use of Lindent.
Seems Lindent adds some spaces when it shoulded. These have been fixed.
In addition, goto targets have issues, these have been fixed
in this patch.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:55 -07:00
Douglas Thompson d391a7b814 drivers/edac: device output clenaup
The error handling output strings needed to be refactored for better
displaying of the error informaton.

Also needed to added offset_value for output as well

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:55 -07:00
Douglas Thompson 86aa8cb7bc drivers/edac: cleanup workq ifdefs
The origin of this code comes from patches at sourceforge, that
allow EDAC to be updated to various kernels. With kernel version 2.6.20 a
new workq system was installed, thus the patches needed to be modified
based on the kernel version. For submitting to the latest kernel.org
those #ifdefs are removed

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:54 -07:00
Douglas Thompson 079708b917 drivers/edac: core Lindent cleanup
Run the EDAC CORE files through Lindent for cleanup

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:54 -07:00
Dave Jiang 91b99041c1 drivers/edac: updated PCI monitoring
Moving PCI to a per-instance device model

This should include the correct sysfs setup as well. Please review.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:54 -07:00
Dave Jiang 81d87cb13e drivers/edac: mod MC to use workq instead of kthread
Move the memory controller object to work queue based implementation from the
kernel thread based.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:54 -07:00
Dave Jiang c4192705fe drivers/edac: add dev_name getter function
Move dev_name() macro to a more generic interface since it's not possible
to determine whether a device is pci, platform, or of_device easily.

Now each low level driver sets the name into the control structure, and
the EDAC core references the control structure for the information.

Better abstraction.

Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:53 -07:00
Douglas Thompson e27e3dac65 drivers/edac: add edac_device class
This patch adds the new 'class' of object to be managed, named: 'edac_device'.

As a peer of the 'edac_mc' class of object, it provides a non-memory centric
view of an ERROR DETECTING device in hardware. It provides a sysfs interface
and an abstraction for varioius EDAC type devices.

Multiple 'instances' within the class are possible, with each 'instance'
able to have multiple 'blocks', and each 'block' having 'attributes'.

At the 'block' level there are the 'ce_count' and 'ue_count' fields
which the device driver can update and/or call edac_device_handle_XX()
functions. At each higher level are additional 'total' count fields,
which are a summation of counts below that level.

This 'edac_device' has been used to capture and present ECC errors
which are found in a a L1 and L2 system on a per CORE/CPU basis.

Signed-off-by: Douglas Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:53 -07:00