Commit Graph

13 Commits

Author SHA1 Message Date
David Howells 987db9f7cd rxrpc: Use the tx-phase skb flag to simplify tracing
Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit.  Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.

We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27 10:04:18 +01:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
David Howells 5a790b7375 rxrpc: Drop the local endpoint arg from rxrpc_extract_addr_from_skb()
rxrpc_extract_addr_from_skb() doesn't use the argument that points to the
local endpoint, so remove the argument.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-10-04 09:32:28 +01:00
David Howells 4764c0da69 rxrpc: Trace packet transmission
Trace successful packet transmission (kernel_sendmsg() succeeded, that is)
in AF_RXRPC.  We can share the enum that defines the transmission points
with the trace_rxrpc_tx_fail() tracepoint, so rename its constants to be
applicable to both.

Also, save the internal call->debug_id in the rxrpc_channel struct so that
it can be used in retransmission trace lines.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-08-01 13:28:23 +01:00
David Howells 6b47fe1d1c rxrpc: Trace UDP transmission failure
Add a tracepoint to log transmission failure from the UDP transport socket
being used by AF_RXRPC.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-10 23:26:01 +01:00
David Howells 7b674e390e rxrpc: Fix IPv6 support
Fix IPv6 support in AF_RXRPC in the following ways:

 (1) When extracting the address from a received IPv4 packet, if the local
     transport socket is open for IPv6 then fill out the sockaddr_rxrpc
     struct for an IPv4-mapped-to-IPv6 AF_INET6 transport address instead
     of an AF_INET one.

 (2) When sending CHALLENGE or RESPONSE packets, the transport length needs
     to be set from the sockaddr_rxrpc::transport_len field rather than
     sizeof() on the IPv4 transport address.

 (3) When processing an IPv4 ICMP packet received by an IPv6 socket, set up
     the address correctly before searching for the affected peer.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-08-29 10:55:20 +01:00
David Howells 775e5b71db rxrpc: The offset field in struct rxrpc_skb_priv is unnecessary
The offset field in struct rxrpc_skb_priv is unnecessary as the value can
always be calculated.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-30 14:39:28 +01:00
David Howells 71f3ca408f rxrpc: Improve skb tracing
Improve sk_buff tracing within AF_RXRPC by the following means:

 (1) Use an enum to note the event type rather than plain integers and use
     an array of event names rather than a big multi ?: list.

 (2) Distinguish Rx from Tx packets and account them separately.  This
     requires the call phase to be tracked so that we know what we might
     find in rxtx_buffer[].

 (3) Add a parameter to rxrpc_{new,see,get,free}_skb() to indicate the
     event type.

 (4) A pair of 'rotate' events are added to indicate packets that are about
     to be rotated out of the Rx and Tx windows.

 (5) A pair of 'lost' events are added, along with rxrpc_lose_skb() for
     packet loss injection recording.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-17 11:24:04 +01:00
David Howells 1c2bc7b948 rxrpc: Use rxrpc_extract_addr_from_skb() rather than doing this manually
There are two places that want to transmit a packet in response to one just
received and manually pick the address to reply to out of the sk_buff.
Make them use rxrpc_extract_addr_from_skb() instead so that IPv6 is handled
automatically.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-13 23:09:13 +01:00
David Howells 248f219cb8 rxrpc: Rewrite the data and ack handling code
Rewrite the data and ack handling code such that:

 (1) Parsing of received ACK and ABORT packets and the distribution and the
     filing of DATA packets happens entirely within the data_ready context
     called from the UDP socket.  This allows us to process and discard ACK
     and ABORT packets much more quickly (they're no longer stashed on a
     queue for a background thread to process).

 (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim().  We instead
     keep track of the offset and length of the content of each packet in
     the sk_buff metadata.  This means we don't do any allocation in the
     receive path.

 (3) Jumbo DATA packet parsing is now done in data_ready context.  Rather
     than cloning the packet once for each subpacket and pulling/trimming
     it, we file the packet multiple times with an annotation for each
     indicating which subpacket is there.  From that we can directly
     calculate the offset and length.

 (4) A call's receive queue can be accessed without taking locks (memory
     barriers do have to be used, though).

 (5) Incoming calls are set up from preallocated resources and immediately
     made live.  They can than have packets queued upon them and ACKs
     generated.  If insufficient resources exist, DATA packet #1 is given a
     BUSY reply and other DATA packets are discarded).

 (6) sk_buffs no longer take a ref on their parent call.

To make this work, the following changes are made:

 (1) Each call's receive buffer is now a circular buffer of sk_buff
     pointers (rxtx_buffer) rather than a number of sk_buff_heads spread
     between the call and the socket.  This permits each sk_buff to be in
     the buffer multiple times.  The receive buffer is reused for the
     transmit buffer.

 (2) A circular buffer of annotations (rxtx_annotations) is kept parallel
     to the data buffer.  Transmission phase annotations indicate whether a
     buffered packet has been ACK'd or not and whether it needs
     retransmission.

     Receive phase annotations indicate whether a slot holds a whole packet
     or a jumbo subpacket and, if the latter, which subpacket.  They also
     note whether the packet has been decrypted in place.

 (3) DATA packet window tracking is much simplified.  Each phase has just
     two numbers representing the window (rx_hard_ack/rx_top and
     tx_hard_ack/tx_top).

     The hard_ack number is the sequence number before base of the window,
     representing the last packet the other side says it has consumed.
     hard_ack starts from 0 and the first packet is sequence number 1.

     The top number is the sequence number of the highest-numbered packet
     residing in the buffer.  Packets between hard_ack+1 and top are
     soft-ACK'd to indicate they've been received, but not yet consumed.

     Four macros, before(), before_eq(), after() and after_eq() are added
     to compare sequence numbers within the window.  This allows for the
     top of the window to wrap when the hard-ack sequence number gets close
     to the limit.

     Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also
     to indicate when rx_top and tx_top point at the packets with the
     LAST_PACKET bit set, indicating the end of the phase.

 (4) Calls are queued on the socket 'receive queue' rather than packets.
     This means that we don't need have to invent dummy packets to queue to
     indicate abnormal/terminal states and we don't have to keep metadata
     packets (such as ABORTs) around

 (5) The offset and length of a (sub)packet's content are now passed to
     the verify_packet security op.  This is currently expected to decrypt
     the packet in place and validate it.

     However, there's now nowhere to store the revised offset and length of
     the actual data within the decrypted blob (there may be a header and
     padding to skip) because an sk_buff may represent multiple packets, so
     a locate_data security op is added to retrieve these details from the
     sk_buff content when needed.

 (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is
     individually secured and needs to be individually decrypted.  The code
     to do this is broken out into rxrpc_recvmsg_data() and shared with the
     kernel API.  It now iterates over the call's receive buffer rather
     than walking the socket receive queue.

Additional changes:

 (1) The timers are condensed to a single timer that is set for the soonest
     of three timeouts (delayed ACK generation, DATA retransmission and
     call lifespan).

 (2) Transmission of ACK and ABORT packets is effected immediately from
     process-context socket ops/kernel API calls that cause them instead of
     them being punted off to a background work item.  The data_ready
     handler still has to defer to the background, though.

 (3) A shutdown op is added to the AF_RXRPC socket so that the AFS
     filesystem can shut down the socket and flush its own work items
     before closing the socket to deal with any in-progress service calls.

Future additional changes that will need to be considered:

 (1) Make sure that a call doesn't hog the front of the queue by receiving
     data from the network as fast as userspace is consuming it to the
     exclusion of other calls.

 (2) Transmit delayed ACKs from within recvmsg() when we've consumed
     sufficiently more packets to avoid the background work item needing to
     run.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 11:10:12 +01:00
David Howells df844fd46b rxrpc: Use a tracepoint for skb accounting debugging
Use a tracepoint to log various skb accounting points to help in debugging
refcounting errors.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-23 15:27:24 +01:00
David Howells 4f95dd78a7 rxrpc: Rework local endpoint management
Rework the local RxRPC endpoint management.

Local endpoint objects are maintained in a flat list as before.  This
should be okay as there shouldn't be more than one per open AF_RXRPC socket
(there can be fewer as local endpoints can be shared if their local service
ID is 0 and they share the same local transport parameters).

Changes:

 (1) Local endpoints may now only be shared if they have local service ID 0
     (ie. they're not being used for listening).

     This prevents a scenario where process A is listening of the Cache
     Manager port and process B contacts a fileserver - which may then
     attempt to send CM requests back to B.  But if A and B are sharing a
     local endpoint, A will get the CM requests meant for B.

 (2) We use a mutex to handle lookups and don't provide RCU-only lookups
     since we only expect to access the list when opening a socket or
     destroying an endpoint.

     The local endpoint object is pointed to by the transport socket's
     sk_user_data for the life of the transport socket - allowing us to
     refer to it directly from the sk_data_ready and sk_error_report
     callbacks.

 (3) atomic_inc_not_zero() now exists and can be used to only share a local
     endpoint if the last reference hasn't yet gone.

 (4) We can remove rxrpc_local_lock - a spinlock that had to be taken with
     BH processing disabled given that we assume sk_user_data won't change
     under us.

 (5) The transport socket is shut down before we clear the sk_user_data
     pointer so that we can be sure that the transport socket's callbacks
     won't be invoked once the RCU destruction is scheduled.

 (6) Local endpoints have a work item that handles both destruction and
     event processing.  The means that destruction doesn't then need to
     wait for event processing.  The event queues can then be cleared after
     the transport socket is shut down.

 (7) Local endpoints are no longer available for resurrection beyond the
     life of the sockets that had them open.  As soon as their last ref
     goes, they are scheduled for destruction and may not have their usage
     count moved from 0.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 15:38:17 +01:00
David Howells 875636163b rxrpc: Separate local endpoint event handling out into its own file
Separate local endpoint event handling out into its own file preparatory to
overhauling the object management aspect (which remains in the original
file).

Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-15 15:37:12 +01:00