Commit Graph

2059 Commits

Author SHA1 Message Date
Lars-Peter Clausen f498e064e0 dmaengine: jz4740: Fix non-cyclic descriptor completion
We need to make sure to deqeueue the descriptor from the active list before
we call vchan_cookie_complete(). Also we need obviously only set chan->desc
to NULL after we stopped using it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-09-11 10:54:25 +05:30
Linus Torvalds c7a19c795b Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...
2014-08-11 07:14:01 -07:00
Maxime Ripard a0bbe990c1 dmaengine: sun6i: depends on RESET_CONTROLLER
Fixes a compilation error when RESET_CONTROLLER is not enabled in the
configuration.

drivers/dma/sun6i-dma.c: In function 'sun6i_dma_probe':
drivers/dma/sun6i-dma.c:911:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-08 22:42:19 +05:30
Alexandre Belloni 6758ddafad dma: at_hdmac: fix invalid remaining bytes detection
Found using smatch:
drivers/dma/at_hdmac.c:299 atc_get_bytes_left() warn: unsigned
'atchan->remain_desc' is never less than zero.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-07 21:52:27 +05:30
Guennadi Liakhovetski cfc6abc3f1 dmaengine: nbpfaxi: don't build this driver where it cannot be used
Although this driver doesn't have any explicit compile-time architecture
dependencies, it is better not to bloat kernels on those platforms, where
this driver isn't needed, unless a compile test is being performed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-07 19:27:43 +05:30
Linus Torvalds 930e0312bc sound updates for 3.17-rc1
There've been many updates in ASoC side at this time, especially the
 framework enhancement for multiple CODECs on a single DAI and more
 componentization works.  The only major change in ALSA core is the
 addition of timestamp type in sw_params field.  This should behave in
 backward compatible way.  Other than that, there are lots of small
 changes and new drivers in wide range, including a large code cut in
 HD-audio driver for deprecated static quirks.  Some highlights are
 below:
 
 ALSA Core:
 - Add the new timestamp type field to sw_params to choose
   MONOTONIC_RAW type
 
 HD-audio:
 - Continued conversion to standard printk macros, generic code
   cleanups
 - Removal of obsoleted static quirk codes for Conexant and C-Media
   codecs
 - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
   Gigabyte BXBT-2807 mobo
 - Intel Braswell support
 
 ASoC:
 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
  link, contributed by Benoit Cousson based on work from Misael Lopez
  Cruz
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah
 - More componentisation work from Lars-Peter Clausen
 - The remainder of the conversions of CODEC drivers to params_width()
   by Mark Brown
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
   Instruments TAS2552
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT4fj0AAoJEGwxgFQ9KSmkXQ0QAIiRmVg40aiJoEdOLGgzNZtq
 r/nXj69AuB6JSy0hKbFyyijjCcRpyCCGvjDYlogjT75M3c35Npz/m85oZHx2tajD
 SB5OA+QxO4EQ3C0GjITIRHJROm4MM8/rnbnNYTsWnEGRkobTFTl0rHbSkA85RGFt
 0zZqqs1R0s/nO9PMQ+5PA5x9xVFiZs2COeCK0CFA9s2ACf/hbxJBRIqYpIFWOo78
 9L41jBOFuC/hIb4qwjgmsCWbKe1KQysTAf+Wty0CKipJ6VhfCbPn1Qn1zXGeUOxc
 mj4eZ6LpJTrVMr/UN02c5vgPOiaBrQ7fWZo3dVHLlIjC6cEI1tUvNYAin7CMEzx8
 DUsvo9p30OheA+ijc9wKaYFY6YmmJZRtpnnMd39i0oPG+bhvoV7vjXjJSB1sLJt1
 o82xLpVL4Th8H+DMDVwA7UIBvvZGZBusw1qsNGfcOPrmExi4ScGhA0gSOO6W2y1z
 VQLRbiXB/HtJGxeqWL6RqJOcLBOlJNmsk4UZMOSCu2OZrWd5I8MuRrNWeHDqhX1H
 +VDEJVhFmM21vMpnobzEPxWsMgTVIAVf3Thh+WgaPxL4Krh0vkpZsgZk16VVmy/o
 OJJF3n41FND4n9zSjOe4MkuL8UCOUpKCaBdqj9K1s6UKwOEKuDNslyT/zqutRWK5
 x1uApU5y+E4iQT/b7cmA
 =RL72
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There've been many updates in ASoC side at this time, especially the
  framework enhancement for multiple CODECs on a single DAI and more
  componentization works.

  The only major change in ALSA core is the addition of timestamp type
  in sw_params field.  This should behave in backward compatible way.

  Other than that, there are lots of small changes and new drivers in
  wide range, including a large code cut in HD-audio driver for
  deprecated static quirks.  Some highlights are below:

  ALSA Core:
   - Add the new timestamp type field to sw_params to choose
     MONOTONIC_RAW type

  HD-audio:
   - Continued conversion to standard printk macros, generic code
     cleanups
   - Removal of obsoleted static quirk codes for Conexant and C-Media
     codecs
   - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
     Gigabyte BXBT-2807 mobo
   - Intel Braswell support

  ASoC:
   - Support for multiple CODECs attached to a single DAI, enabling
     systems with for example multiple DAC/speaker drivers on a single
     link, contributed by Benoit Cousson based on work from Misael Lopez
     Cruz
   - Support for byte controls larger than 256 bytes based on the use of
     TLVs contributed by Omair Mohammed Abdullah
   - More componentisation work from Lars-Peter Clausen
   - The remainder of the conversions of CODEC drivers to params_width()
     by Mark Brown
   - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks,
     Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
     Instruments TAS2552
   - Lots of updates and fixes, especially to the DaVinci, Intel,
     Freescale, Realtek, and rcar drivers"

* tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits)
  ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.*
  ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input
  sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata
  sound/oss/opl3: Remove typedef opl_devinfo
  ALSA: fireworks: fix specifiers in format strings for propper output
  ASoC: imx-audmux: Use uintptr_t for port numbers
  ASoC: davinci: Enable menuconfig entry for McASP
  ASoC: fsl_asrc: Don't access members of config before checking it
  ASoC: fsl_sarc_dma: Check pair before using it
  ASoC: adau1977: Fix truncation warning on 64 bit architectures
  ALSA: virtuoso: add Xonar Essence STX II support
  ALSA: riptide: fix %d confusingly prefixed with 0x in format strings
  ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings
  ALSA: hda - add codec ID for Braswell display audio codec
  ALSA: hda - add PCI IDs for Intel Braswell
  ALSA: usb-audio: Adjust Gamecom 780 volume level
  ALSA: usb-audio: improve dmesg source grepability
  ASoC: rt5670: Fix duplicate const warnings
  ASoC: rt5670: Staticise non-exported symbols
  ASoC: Intel: update stream only on stream IPC msgs
  ...
2014-08-06 20:07:24 -07:00
Fengguang Wu 1141b7e95a dmaengine: nbpf_error_get_channel() can be static
CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
CC: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-05 22:00:18 +05:30
Mark Brown 3a2ac12f8e Merge remote-tracking branch 'asoc/topic/dma' into asoc-next 2014-08-04 16:31:18 +01:00
Mark Brown 6fc8ae787c dma: pl08x: Use correct specifier for size_t values
When printing size_t values we should use the %zd or %zx format specifier
in order to ensure the value is displayed correctly and avoid warnings from
sparse.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:45:26 +05:30
Laurent Pinchart 31c1e5a135 dmaengine: Remove the context argument to the prep_dma_cyclic operation
The argument is always set to NULL and never used. Remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:41:50 +05:30
Guennadi Liakhovetski f02323ec68 dmaengine: nbpfaxi: convert to tasklet
It is common among dmaengine drivers to use a tasklet for bottom half
interrupt processing. Convert nbpfaxi to do the same.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:30:31 +05:30
Guennadi Liakhovetski 67b1668470 dmaengine: nbpfaxi: fix a theoretical race
A race possibility exists if a DMA slave driver tries to free channel
resources witout waiting for all transfers to complete and without
explicitly terminating all requests. In such a case the IRQ processing
thread can race with .device_free_chan_resources(). To fix this race empty
all descriptor lists before freeing descriptor cache.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:30:31 +05:30
Guennadi Liakhovetski b45b262cef dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
This patch adds a driver for NBPF DMAC IP cores from Renesas, designed for
the AMBA AXI bus.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04 13:30:31 +05:30
Peter Ujfalusi ed64610f29 dmaengine: edma: Do not register second device when booted with DT
DT boot does not yet support more than one edma device. To avoid issues at
runtime we should not register the second device when the kernel is booted
with DT.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:27:47 +05:30
Peter Ujfalusi 04d537d95e dmaengine: edma: Do not change the error code returned from edma_alloc_slot
In case of edma_alloc_slot() failure during probe we should return the error
unchanged to make debugging easier.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:27:47 +05:30
Laurent Pinchart 4415b03abb dmaengine: shdma: Allocate cyclic sg list dynamically
The sg list used to prepare cyclic DMA descriptors is currently
allocated statically on the stack as an array of 32 elements. This makes
the shdma_prep_dma_cyclic() function consume a lot of stack space, as
reported by the compiler:

drivers/dma/sh/shdma-base.c: In function ‘shdma_prep_dma_cyclic’:
drivers/dma/sh/shdma-base.c:715:1: warning: the frame size of 1056 bytes
is larger than 1024 bytes [-Wframe-larger-than=]

Given the limited Linux kernel stack size, this could lead to stack
overflows. Fix the problem by allocating the sg list dynamically.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Laurent Pinchart c091ff51b4 dmaengine: shdma: Make channel filter ignore unrelated devices
The shdma_chan_filter() function relies on the DMA channel being
embedded in an shdma_chan structure. If this assumption isn't true, for
instance when the system contains DMA channels supported by an unrelated
driver, the function will crash.

Avoid this by returning false directly when the channel belongs to an
unrelated device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Laurent Pinchart 9f2c2bb312 dmaengine: sh: Rework Kconfig and Makefile
Separate helpers and drivers in the Kconfig and Makefile to improve
readability and move the CONFIG_OF dependency from the Makefile to
Kconfig.

[pebolle@tiscali.nl: reported need to rename SHDMA_R8A73A4 instances]
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[horms+renesas@verge.net.au: squashed rename of SHDMA_R8A73A4 instances]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-31 17:15:45 +05:30
Maxime Ripard 4fbd804e00 dmaengine: sun6i: Fix memory leaks
The sun6i_dma_prep_memcpy and sun6i_dma_prep_slave_sg functions were both
leaking the descriptor they allocated if an  error was happening after a
successful dma_pool_alloc call.

It also fixes a memleak that was happening in the scatter gather list
traversal, that was allocating as much descriptor as there was scatter gather
items, but only freeing the current descriptor if an error was to arise.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30 19:14:17 +05:30
Maxime Ripard 174427c1bb dmaengine: sun6i: Free the interrupt before killing the tasklet
There's still a small window between the call to sun6i_kill_tasklet and the end
of the driver remove function where a spurious interrupt might trigger, and
start using deallocated resources.

Replace the call to synchronize_irq by a free_irq, so that we're sure that we
won't get any further interrupts when we're deallocating resources.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30 19:14:17 +05:30
Maxime Ripard 92e4a3bf38 dmaengine: sun6i: Remove switch statement from buswidth convertion routine
Since the conversion routine is quite trivial, we don't need this switch, and
we can just use a simple calculation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30 19:14:17 +05:30
Alexander Popov 2795eedf2f dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
Select DMA_ENGINE when DMA_OF is selected since
of_dma_xlate_by_chan_id() from drivers/dma/of-dma.c uses
dma_get_slave_channel() from drivers/dma/dmaengine.c

This resolves error reported:

drivers/built-in.o: In function `of_dma_xlate_by_chan_id':
drivers/dma/of-dma.c:253: undefined reference to `dma_get_slave_channel'

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-30 19:06:55 +05:30
Vinod Koul db0e701819 Merge commit 'renesas-rcar-audmapp-for-v3.17' into for-linus 2014-07-28 17:26:36 +05:30
Peter Ujfalusi 8e8805d5bf dmaengine: edma: Serve cyclic (audio) channels with high priority queue
Move the DMA channel used in cyclic mode (audio) to the highest priority
event queue which helps to reduce audio problems.
When the channel is terminated, move it back to the default queue.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:03:16 +05:30
Peter Ujfalusi a1f146f317 dmaengine: edma: Support to suppress the period interrupts in cyclic mode
If the client (audio) does not request interrupts for every period we can
disable them.
With updated audio driver stack we can play audio w/o the need to process
any edma interrupts.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:02:53 +05:30
Peter Ujfalusi b7f9bc5267 dmaengine: edma: Update caps->residue_granularity to match with reality
The edma can report accurate DMA position so update the residue_granularity
to DMA_RESIDUE_GRANULARITY_BURST.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 17:02:33 +05:30
Vinod Koul 7f5e03e736 dmaengine: sun61: fix warning on bad print specfier
The sg_dma_len() returns unsigned int but we had driver print it as %zu, use
%u as documented in Documentation/printk-formats.txt

drivers/dma/sun6i-dma.c: In function ‘sun6i_dma_prep_slave_sg’:
drivers/dma/sun6i-dma.c:643: warning: format ‘%zu’ expects type ‘size_t’,
but argument 8 has type ‘unsigned int’
drivers/dma/sun6i-dma.c:661: warning: format ‘%zu’ expects type ‘size_t’,
but argument 8 has type ‘unsigned int’

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 12:49:59 +05:30
Vinod Koul 42c0d54e62 dmaengine: sun6i: fix build failure on x86, xilinx targets
Since the driver defined COMPILE_TEST, it gets compiled for different arch's
The driver uses __virt_to_phys() insteadof virt_to_phys, so replace it

drivers/dma/sun6i-dma.c: In function ‘sun6i_dma_dump_chan_regs’:
drivers/dma/sun6i-dma.c:203: error: implicit declaration of function '__virt_to_phys'

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-28 12:49:33 +05:30
Alexander Popov ec1f0c9666 dmaengine: mpc512x: register for device tree channel lookup
Register the controller for device tree based lookup of DMA channels
(non-fatal for backwards compatibility with older device trees) and
provide the '#dma-cells' property in the shared mpc5121.dtsi file

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-26 00:21:42 +05:30
Alexander Popov 16369efb1f dmaengine: of: add common xlate function for matching by channel id
This patch adds a new common OF dma xlate callback function which will match a
channel by it's id. The binding expects one integer argument which it will use to
lookup the channel by the id.

Unlike of_dma_simple_xlate this function is able to handle a system with
multiple DMA controllers. When registering the of dma provider with
of_dma_controller_register a pointer to the dma_device struct which is
associated with the dt node needs to passed as the data parameter.
New function will use this pointer to match only channels which belong to the
specified DMA controller.

Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-26 00:21:41 +05:30
Maxime Ripard 5558593087 dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller
The Allwinner A31 has a 16 channels DMA controller that it shares with the
newer A23. Although sharing some similarities with the DMA controller of the
older Allwinner SoCs, it's significantly different, I don't expect it to be
possible to share the driver for these two.

The A31 Controller is able to memory-to-memory or memory-to-device transfers on
the 16 channels in parallel.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 18:14:58 +05:30
Vinod Koul 37a746aaf5 dmaengine: ipu: use return value of request_irq
Commit - 653e67f7e5: "dmaengine: inherit debug settings from the subsystem
for subdirectories" introduced debug option for subdirectories too
This exposed issue with ipu driver not using return value

For now just warn users about it

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 15:39:50 +05:30
Bjorn Helgaas e2f9922ad4 dmaengine: jz4740: Fix GPL v2 license string typo
Per license_is_gpl_compatible(), the MODULE_LICENSE() string for GPL v2 is
"GPL v2", not "GPLv2".  Use "GPL v2" so this module doesn't taint the
kernel.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 14:33:22 +05:30
Jingchang Lu 211bfef7c2 dmaengine: fsl-edma: fix dmamux index calculating error
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 14:11:50 +05:30
Nicolin Chen f892afb07e dmaengine: imx-sdma: Add a new DMATYPE for Shared Peripheral ASRC
Shared Peripheral ASRC, running on SPBA, needs to use shp sciprts for
DMA transfer. So this patch just adds a new DMATYPE for it.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 14:10:36 +05:30
Nicolin Chen 0b3518652c dmaengine: imx-sdma: Save imx_dma_data into sdmac
The filter() function is currently called by xlate() while it transfers
imx_dma_data as a local variable to the filter() but releases the data
right after returning a DMA channel pointer, which results chan->private
pointing an invalid memory space.

So this patch just stores the imx_dma_data into sdmac to make usre the
private pointer valid as long as the channel exists.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-25 14:10:24 +05:30
Javier Martinez Canillas b1e51d771f dmaengine: pl330: Check if the DMA descriptor is NULL
Commit 6079d38 ("dmaengine: pl330: Remove useless xfer_cb indirection")
removed the __callback() function which created an unnecessary level of
indirection to execute the tranfer callback .xfer_cb

Unfortunately the commit also changed the semantics slightly since that
function used to check if the request was not NULL before attempting to
execute the callback function. Not checking this could lead to a kernel
NULL pointer dereference error.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-22 21:38:43 +05:30
Vinod Koul ff4d02419a Merge commit 'renesas-shdma-for-v3.17' into for-linus 2014-07-21 19:06:28 +05:30
Sudeep Dutt ce05b68692 dma: Fix MIC X100 DMA Driver Kconfig option
Select DMA_ENGINE instead of DMAENGINE and delete the default
line as the default is 'n' anyways.

Link: https://lkml.org/lkml/2014/7/14/90
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-16 13:47:54 -07:00
Andy Shevchenko dd8ecfcac6 dmaengine: dw: don't perform DMA when dmaengine_submit is called
Accordingly to discussion [1] and followed up documentation the DMA controller
driver shouldn't start any DMA operations when dmaengine_submit() is called.

This patch fixes the workflow in dw_dmac driver to follow the documentation.

[1] http://www.spinics.net/lists/arm-kernel/msg125987.html

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:30 +05:30
Andy Shevchenko cba15617c3 dmaengine: dw: add debug message to dwc_dostart_first_queued
It would be useful to know when the first descriptor in the queue is started
along with its cookie.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:29 +05:30
Andy Shevchenko e7637c6c03 dmaengine: dw: introduce dwc_dostart_first_queued() helper
We have a duplicate code which starts first descriptor in the queue. Let's make
this as a separate helper that can be used in future as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:14:28 +05:30
Lars-Peter Clausen c26939e520 dmaengine: pl330: Remove pl330_chan_ctrl()
The pl330_chan_ctrl() function has 3 internal code paths which, except for the
locking, do not share any code outside of their sections. One code path is never
exercised and can be removed. The other two are mostly just forwards to the
_start() and _stop() calls. This patch modifies the code to instead of going via
pl330_chan_ctrl() to call _start() and _stop() directly. This allows to
completely remove pl330_chan_ctrl().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:04 +05:30
Lars-Peter Clausen 8ed30a1426 dmaengine: pl330: Simplify marking a request as unused
Instead of storing a special instruction in the command buffer to mark a request
as currently unused just set the descriptor field to NULL.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:04 +05:30
Lars-Peter Clausen 9dc5a315fe dmaengine: pl330: Embed pl330_req directly into dma_pl330_desc
The pl330_req struct is embedded into the dma_pl330_desc struct. But half of the
pl330_req struct are pointers to other fields of the dma_pl330_desc struct it is
embedded to. By directly embedding the fields from the pl330_req struct into the
dma_pl330_desc struct and reworking the code to work with the dma_pl330_desc
struct those pointers can be eliminated. This slightly simplifies the code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:04 +05:30
Lars-Peter Clausen f6f2421c0a dmaengine: pl330: Merge dma_pl330_dmac and pl330_dmac structs
Both the dma_pl330_dmac and the pl330_dmac struct have the same lifetime and the
separation of them is a relict of this having been two different drivers in the
past. Merging them into one struct makes the code a bit simpler as it for
example allows to remove the pointers going back and forth between the two
structs.

While we are at it also directly embed the pl330_info struct into the
pl330_dmac struct as this allows to remove some more redundant fields.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:04 +05:30
Lars-Peter Clausen fbbcd9be96 dmaengine: pl330: Simplify is_manager()
Since we keep a pointer to the manager thread it is fairly easy to check if a
thread is the manager thread.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:04 +05:30
Lars-Peter Clausen 1b446d2a61 dmaengine: pl330: Remove uneccessary ccr validation
We know that we do not create invalid ccr settings in this driver. There is no
need to validate them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:03 +05:30
Lars-Peter Clausen 65ad60600f dmaengine: pl330: Change type pl330_chid from void * to struct pl330_thread *
The pl330_chid field of the dma_pl330_chan struct always holds a pointer to the
thread that is associated with the channel. Changing its type form void * to
struct pl330_thread makes things more type safe and removes the need for
unnecessary typecasts. While we are at it also rename the field from the cryptic
pl330_chid to thread.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:03 +05:30
Lars-Peter Clausen 6079d38ca2 dmaengine: pl330: Remove useless xfer_cb indirection
The xfer_cb callback of the pl330_req struct is always set to the same function.
This adds an unnecessary step of indirection. Instead just call the callback
function directly.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 22:01:03 +05:30