Commit Graph

495 Commits

Author SHA1 Message Date
Christoph Hellwig 6bb35e009b target: replace ->execute_task with ->execute_cmd
Make CDB emulation work on commands instead of tasks again as a preparation
of removing tasks completely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:11:14 -07:00
Christoph Hellwig bd31377878 target: remove the task_sectors field in struct se_task
Remove the task_sectors field that isn't used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:46 -07:00
Christoph Hellwig 7a83aa4e7b target: remove the task_size field in struct se_task
Now that we don't split commands the size field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the size in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:03:41 -07:00
Christoph Hellwig 72a0e5e2e2 target: remove the task_lba field in struct se_task
Now that we don't split commands the lba field in the task is always
equivalent to the one in the CDB, even in cases where we have two tasks
due to a BIDI transfer.  Just refer the the lba in the command instead
of duplicating it in the task.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Christoph Hellwig ed3102c678 target: remove target_get_task_cdb
Now that tasks are always the same size as the command there is no need
to rewrite a CDB in common code.  Notw that we keep the separately allocated
CDB in the pscsi and stgt backends for now, to easy reintroducing any
command splitting local to these backends if nessecary.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:59 -07:00
Christoph Hellwig 32d8d2e430 target: remove the unused transport_limit_task_sectors helper
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:41 -07:00
Stefan Hajnoczi ed0b2144c5 target: Handle GET_EVENT_STATUS_NOTIFICATION passthrough
The SCSI MMC GET_EVENT_STATUS_NOTIFICATION command can be used to find
out about media change, among other things.  This patch adds it to the
command sequencer so that PSCSI CD-ROM passthrough works with modern
Linux guests that issue this command.

Tested-by: Cong Meng <mengcong@cn.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:33 -07:00
Dan Carpenter 381e309a65 target/iscsi: cleanup some allocation style issues
We can use kcalloc() here instead of kzalloc().  It's better style and
it has overflow checking built in.

Also -ENOMEM is the correct error code for allocation errors.  -1 means
-EPERM.  None of the callers preserve the error codes so it doesn't
matter except as a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06 15:02:33 -07:00
Andy Grover bfb79eac20 target/iscsi: Go back to core allocating data buffer for cmd
We originally changed iscsi to allocate its own buffers just as an
intermediate step to clean up some core buffer allocation mechanisms. Now
we can put it back.

Also had to change allocate_iovecs to use data_length instead of
t_data_nents because iovecs are now allocated before the data buffer, thus
t_data_nents is not yet initialized.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:39 -07:00
Andy Grover 11e319ed95 target: Call core_alua_check_nonop_delay in target_submit_cmd()
It appears iscsi is the only one to call this in its cmd submit path, but
it appears to be applicable to all fabrics, and should always be called.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:39 -07:00
Andy Grover 4334e49bca target/iscsi: Fold _decide_list_to_build into _build_pdu_and_seq_lists
Rename iscsit_build_pdu_and_seq_list to iscsit_do_build_pdu_and_seq_lists

Rename iscsit_do_build_list to iscsit_build_pdu_and_seq_lists

Move code from iscsit_decide_list_to_build into _seq_pdu_list.c, seems
a better fit.

Also update some comments in pdu/seq code for correctness and whitespace.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:38 -07:00
Andy Grover ebf1d95ca2 target/iscsi: Eliminate iscsi_cmd.data_length
Redundant, just use iscsi_cmd->se_cmd.data_length once se_cmd is
initialized, or hdr->data_length before then.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:38 -07:00
Andy Grover 065ca1e42f target/iscsi: Move init_se_cmd closer to lookup_cmd_lun
if we can get calls to init_se_cmd, get_sess_cmd, lookup_cmd_lun,
core_alua_check_nonop_delay, and handle_cdb_direct next to each other,
then we can just call target_submit_cmd. This is a step towards that
goal.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:37 -07:00
Andy Grover d28b11692e target/iscsi: Inline iscsit_allocate_se_cmd and *_for_tmr
Trying to move a bunch of stuff around so iscsi can use target_submit_cmd
someday, and so stuff needs to be in that function directly instead of
hidden, so it can be reordered etc.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:37 -07:00
Andy Grover b16a35b050 target: rewrite comment for generic_new_cmd
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:36 -07:00
Andy Grover a12f41f841 target: Rename target_allocate_tasks to target_setup_cmd_from_cdb
This patch renames a horribly misnamed function that no longer allocate
tasks to something more descriptive for it's modern use in target core.

(nab: Fix up ib_srpt to use this as well ahead of a target_submit_cmd
conversion)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:36 -07:00
Andy Grover 8b1e1244db target/iscsi: Misc cleanups from Agrover (round 2)
This patch includes the handful of squashed patches for target/iscsi from
Andy's original series into lio-core/master code:

*) Make iscsit_add_reject static
*) Remove unused data_offset_end from iscsi_datain_req
*) Remove "#if 0" stubs
*) Rename iscsi_datain_req to cmd_datain_node
*) Cleanups for built_r2ts_for_cmd()
*) Cleanups for Cleanup build_sendtargets_response()

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:35 -07:00
Andy Grover 6f3c0e69a9 target/iscsi: Refactor target_tx_thread immediate+response queue loops
Immediate queue:

Consolidate down to one switch statement by moving send_tx_data and stuff
from second switch into the first switch, or the functions the first switch
calls.

Response queue:

Do not lock istate_lock except directly around i_state modifications.

Put entire ISTATE_SEND_DATAIN path within first switch statement, in prep
for further refactoring.

All other cases set use_misc = 1 and will not be using sendpage, so just
use send_tx_data for these and set use_misc param to 1.

map_sg, sent_status, use_misc, and se_cmd vars no longer needed.

Then put immediate and response handling in separate functions in order
to get iscsi_target_tx_thread down to where it fits on a page.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:34 -07:00
Andy Grover 4580cf3848 target/iscsi: Remove unneeded locking from iscsi_target_tx_thread
When processing immediate queue, we're switching on a local variable
so it's not necessary to lock around it. However, we are modifying
cmd->i_state in two spots, so lock around those parts only.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:34 -07:00
Andy Grover c6037cc546 target/iscsi: Misc cleanups from Agrover (round 1)
*) Use decoded cmd->immediate_cmd for conditional instead of
   re-examining hdr->opcode
*) Make iscist_dataout_post_crc_passed more legible
*) use max() to reduce code in build_r2ts_for_cmd()
*) Remove CONFIG_SMP and if 0 ifdefs
*) Replace if/goto with a while loop
*) Remove unused conn->tx_immediate_queue and tx_response_queue

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:33 -07:00
Andy Grover 2fbb471e78 target/iscsi: Rename iscsi_cmd.i_list to iscsi_cmd.i_conn_node
The name change makes it clear this list_head is so the cmd can be an
item in the connection's conn_cmd_list.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:33 -07:00
Roland Dreier 957525a242 target: Remove transport_do_task_sg_chain() and associated detritus
Now that all fabrics are converted over to using se_cmd->t_data_sg
directly, we can drop the task sg chaining support.  With the modern
memory allocation in target core, task sg chaining is needless
overhead -- we would split up the main cmd sglist into pieces, and
then splice those pieces back together instead of just using the
original list directly.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:32 -07:00
Roland Dreier e182d6828d tcm_fc: Remove use of transport_do_task_sg_chain()
With the modern target core, se_cmd->t_data_sg already points to a
sglist that covers the whole command.  So task_sg chaining is needless
overhead and obfuscation -- instead of splicing the split up task
sglists back into one list, we can just use the original list directly.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:31 -07:00
Christoph Hellwig bebe2fdc17 target: stop splitting commands into multiple tasks
From hch:

The high-performance backends (iblock and rd) support tasks of unlimited
size.  With that there is no reason to keep a complex infrastructure for
splitting up commands in place.  Stop doing so and only submit a single
task per data direction.  Once this is in place we can slowly remove fields
from the task that duplicate things in the command, or move other fields
into the command.

From nab:

The benefit to IBLOCK performance by removing the additional
fast-path allocation overhead + SGL mapping to se_task->task_sg[] is now
greater than transparently supporting an received CDB I/O length that
exceeds what is allowed by backend pSCSI LLD hardware max_sectors, that
was originally supported for all backend export cases.

This change may effect some users of pSCSI users on legacy hardware, but
I think most folks are now using TYPE_DISK struct scsi_device export
with IBLOCK.  The only other place where this may can issues that cannot
be resolved with IBLOCK TYPE_DISK is using TYPE_ROM, TYPE_TAPE or other
pSCSI non TYPE_DISK export with an SCSI LLDs using a smaller
max_sectors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:31 -07:00
Christoph Hellwig 83799efbff target: don't limit transfer sizes for the ramdisk backend
The ramdisk backend has not inherent limitations for handling requests,
so don't artificially limits the transfer size.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:30 -07:00
Christoph Hellwig 8feb58d04b target: misc ramdisk backend cleanups
Remove various leftovers of the old direct/indirect split, as well as the
unused rd_request structure and a couple unused defines and fields.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:30 -07:00
Sebastian Andrzej Siewior b0d7994660 target: add unknown size flag to target_submit_cmd()
The UASP protocol does not inform the target device upfront how much
data it should expect so we have to learn in from the CDB.  So in order
to handle this case, add a TARGET_SCF_UNKNOWN_SIZE to target_submit_cmd()
and perform an explictly assignment for se_cmd->data_length from the
extracted CDB size in transport_generic_cmd_sequencer().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 17:40:03 -07:00
Nicholas Bellinger 58d9261877 target: Remove obsolete DF_READ_ONLY usage
This was used at one time as a hack by FILEIO backend registration to
allow a struct block_device that was claimed with blkdev_get (by a local
filesystem mount for example) to be exported as read-only (SCSI WP=1).

Since FILEIO backend registration will no longer attempt to obtain
exclusive access to an underlying struct block_device here, this flag is
now obsolete.

Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-14 16:04:58 -07:00
Mark Rustad 06383f10c4 tcm_fc: Do not free tpg structure during wq allocation failure
Avoid freeing a registered tpg structure if an alloc_workqueue call
fails.  This fixes a bug where the failure was leaking memory associated
with se_portal_group setup during the original core_tpg_register() call.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-06 18:57:05 -07:00
Mark Rustad e1c4038282 tcm_fc: Add abort flag for gracefully handling exchange timeout
Add abort flag and use it to terminate processing when an exchange
is timed out or is reset. The abort flag is used in place of the
transport_generic_free_cmd function call in the reset and timeout
cases, because calling that function in that context would free
memory that was in use. The aborted flag allows the lifetime to
be managed in a more normal way, while truncating the processing.

This change eliminates a source of memory corruption which
manifested in a variety of ugly ways.

(nab: Drop unused struct fc_exch *ep in ft_recv_seq)

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-06 18:56:43 -07:00
Linus Torvalds 1ab142d499 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This contains the usual set of updates and bugfixes to target-core +
  existing fabric module code, along with a handful of the patches
  destined for v3.3 stable.

  It also contains the necessary target-core infrastructure pieces
  required to run using tcm_qla2xxx.ko WWPNs with the new Qlogic Fibre
  Channel fabric module currently queued in target-pending/for-next-merge,
  and coming for round 2.

  The highlights for this series include:

   - Add target_submit_tmr() helper function for fabric task management
     (andy)
   - Convert tcm_fc to use target_submit_tmr() (andy)
   - Replace target core various cmd flags with a transport state (hch)
   - Convert loopback to use workqueue submission (hch)
   - Convert target core to use array_zalloc for tpg_lun_list (joern)
   - Convert target core to use array_zalloc for device_list (joern)
   - Add target core support for TMR_ABORT_TASK (nab)
   - Add target core se_sess->sess_kref + get/put helpers (nab)
   - Add target core se_node_acl->acl_kref for ->acl_free_comp usage
     (nab)
   - Convert iscsi-target to use target_put_session + sess_kref (nab)
   - Fix tcm_fc fc_exch memory leak in ft_send_resp_status (nab)
   - Fix ib_srpt srpt_handle_cmd send_ioctx->ioctx_kref leak on
     exception (nab)
   - Fix target core up handling of short INQUIRY buffers (roland)
   - Untangle target-core front-end and back-end meanings of max_sectors
     attribute (roland)
   - Set loopback residual field for SCSI commands (roland)
   - Fix target-core 16-bit target ports for SET TARGET PORT GROUPS
     emulation (roland)

  Thanks again to Andy, Christoph, Joern, Roland, and everyone who has
  contributed this round!"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (64 commits)
  ib_srpt: Fix srpt_handle_cmd send_ioctx->ioctx_kref leak on exception
  loopback: Fix transport_generic_allocate_tasks error handling
  iscsi-target: remove improper externs
  iscsi-target: Remove unused variables in iscsi_target_parameters.c
  target: remove obvious warnings
  target: Use array_zalloc for device_list
  target: Use array_zalloc for tpg_lun_list
  target: Fix sense code for unsupported SERVICE ACTION IN
  target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled
  target: Bump core version to v4.1.0-rc2-ml + fabric versions
  tcm_fc: Fix fc_exch memory leak in ft_send_resp_status
  target: Drop unused legacy target_core_fabric_ops API callers
  iscsi-target: Convert to use target_put_session + sess_kref
  target: Convert se_node_acl->acl_group removal to use ->acl_kref
  target: Add se_node_acl->acl_kref for ->acl_free_comp usage
  target: Add se_node_acl->acl_free_comp for NodeACL release path
  target: Add se_sess->sess_kref + get/put helpers
  target: Convert session_lock to irqsave
  target: Fix typo in drivers/target
  iscsi-target: Fix dynamic -> explict NodeACL pointer reference
  ...
2012-03-22 12:38:04 -07:00
Linus Torvalds 3556485f15 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates for 3.4 from James Morris:
 "The main addition here is the new Yama security module from Kees Cook,
  which was discussed at the Linux Security Summit last year.  Its
  purpose is to collect miscellaneous DAC security enhancements in one
  place.  This also marks a departure in policy for LSM modules, which
  were previously limited to being standalone access control systems.
  Chromium OS is using Yama, and I believe there are plans for Ubuntu,
  at least.

  This patchset also includes maintenance updates for AppArmor, TOMOYO
  and others."

Fix trivial conflict in <net/sock.h> due to the jumo_label->static_key
rename.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
  AppArmor: Fix location of const qualifier on generated string tables
  TOMOYO: Return error if fails to delete a domain
  AppArmor: add const qualifiers to string arrays
  AppArmor: Add ability to load extended policy
  TOMOYO: Return appropriate value to poll().
  AppArmor: Move path failure information into aa_get_name and rename
  AppArmor: Update dfa matching routines.
  AppArmor: Minor cleanup of d_namespace_path to consolidate error handling
  AppArmor: Retrieve the dentry_path for error reporting when path lookup fails
  AppArmor: Add const qualifiers to generated string tables
  AppArmor: Fix oops in policy unpack auditing
  AppArmor: Fix error returned when a path lookup is disconnected
  KEYS: testing wrong bit for KEY_FLAG_REVOKED
  TOMOYO: Fix mount flags checking order.
  security: fix ima kconfig warning
  AppArmor: Fix the error case for chroot relative path name lookup
  AppArmor: fix mapping of META_READ to audit and quiet flags
  AppArmor: Fix underflow in xindex calculation
  AppArmor: Fix dropping of allowed operations that are force audited
  AppArmor: Add mising end of structure test to caps unpacking
  ...
2012-03-21 13:25:04 -07:00
Linus Torvalds 9f3938346a Merge branch 'kmap_atomic' of git://github.com/congwang/linux
Pull kmap_atomic cleanup from Cong Wang.

It's been in -next for a long time, and it gets rid of the (no longer
used) second argument to k[un]map_atomic().

Fix up a few trivial conflicts in various drivers, and do an "evil
merge" to catch some new uses that have come in since Cong's tree.

* 'kmap_atomic' of git://github.com/congwang/linux: (59 commits)
  feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal
  highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
  drbd: remove the second argument of k[un]map_atomic()
  zcache: remove the second argument of k[un]map_atomic()
  gma500: remove the second argument of k[un]map_atomic()
  dm: remove the second argument of k[un]map_atomic()
  tomoyo: remove the second argument of k[un]map_atomic()
  sunrpc: remove the second argument of k[un]map_atomic()
  rds: remove the second argument of k[un]map_atomic()
  net: remove the second argument of k[un]map_atomic()
  mm: remove the second argument of k[un]map_atomic()
  lib: remove the second argument of k[un]map_atomic()
  power: remove the second argument of k[un]map_atomic()
  kdb: remove the second argument of k[un]map_atomic()
  udf: remove the second argument of k[un]map_atomic()
  ubifs: remove the second argument of k[un]map_atomic()
  squashfs: remove the second argument of k[un]map_atomic()
  reiserfs: remove the second argument of k[un]map_atomic()
  ocfs2: remove the second argument of k[un]map_atomic()
  ntfs: remove the second argument of k[un]map_atomic()
  ...
2012-03-21 09:40:26 -07:00
Linus Torvalds 5928a2b60c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes for v3.4 from Ingo Molnar.  The major features of this
series are:

 - making RCU more aggressive about entering dyntick-idle mode in order
   to improve energy efficiency

 - converting a few more call_rcu()s to kfree_rcu()s

 - applying a number of rcutree fixes and cleanups to rcutiny

 - removing CONFIG_SMP #ifdefs from treercu

 - allowing RCU CPU stall times to be set via sysfs

 - adding CPU-stall capability to rcutorture

 - adding more RCU-abuse diagnostics

 - updating documentation

 - fixing yet more issues located by the still-ongoing top-to-bottom
   inspection of RCU, this time with a special focus on the CPU-hotplug
   code path.

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  rcu: Stop spurious warnings from synchronize_sched_expedited
  rcu: Hold off RCU_FAST_NO_HZ after timer posted
  rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop
  rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections
  rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit()
  rcu: Remove redundant check for rcu_head misalignment
  PTR_ERR should be called before its argument is cleared.
  rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep
  rcu: Trace only after NULL-pointer check
  rcu: Call out dangers of expedited RCU primitives
  rcu: Rework detection of use of RCU by offline CPUs
  lockdep: Add CPU-idle/offline warning to lockdep-RCU splat
  rcu: No interrupt disabling for rcu_prepare_for_idle()
  rcu: Move synchronize_sched_expedited() to rcutree.c
  rcu: Check for illegal use of RCU from offlined CPUs
  rcu: Update stall-warning documentation
  rcu: Add CPU-stall capability to rcutorture
  rcu: Make documentation give more realistic rcutorture duration
  rcutorture: Permit holding off CPU-hotplug operations during boot
  rcu: Print scheduling-clock information on RCU CPU stall-warning messages
  ...
2012-03-20 10:10:18 -07:00
Cong Wang ca747d610b target: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:20 +08:00
Nicholas Bellinger ee9b866a36 loopback: Fix transport_generic_allocate_tasks error handling
This patch addresses a tcm_loop bug with transport_generic_allocate_tasks()
return checking in tcm_loop_submission_work() where other non zero return
codes (including -EBUSY for reservation conflicts) are incorrectly falling
through to transport_generic_map_mem_to_cmd() -> transport_handle_cdb_direct().

This bug was introduced into target-pending/for-next-merge with the following
for-3.4 commit:

commit 16786454ac
Author: Christoph Hellwig <hch@infradead.org>
Date:   Thu Feb 2 17:04:42 2012 -0500

    tcm_loop: switch to using transport_handle_cdb_direct

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-17 18:07:27 -07:00
Dan Carpenter f760903ae5 iscsi-target: remove improper externs
These externs aren't needed and Sparse complains about them.

drivers/target/iscsi/iscsi_target_nodeattrib.c:52:12: warning:
	function 'iscsit_na_dataout_timeout' with external linkage has
	definition

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-17 18:07:04 -07:00
Jörn Engel a227fb3a5a iscsi-target: Remove unused variables in iscsi_target_parameters.c
local_right_val was an obvious case, tmp_ptr is also write-only, but
evades the compiler by being passed to simple_strtoul as char **endp.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:16:25 -07:00
Jörn Engel 281689051a target: remove obvious warnings
Get rid of a bunch of write-only variables.  In a number of cases I
suspect actual bugs to be present, so I left all of those for a second
look.

(nab: fix lio-core patch fuzz)

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:16:09 -07:00
Jörn Engel f2083241f2 target: Use array_zalloc for device_list
Turns an order-8 allocation into slab-sized ones, thereby preventing
allocation failures with memory fragmentation.

This likely saves memory as well, as the slab allocator can pack objects
more tightly than the buddy allocator.

(nab: Fix lio-core patch fuzz)

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:15:51 -07:00
Jörn Engel 4a5a75f32d target: Use array_zalloc for tpg_lun_list
Turns an order-10 allocation into slab-sized ones, thereby preventing
allocation failures with memory fragmentation.

This likely saves memory as well, as the slab allocator can pack objects
more tightly than the buddy allocator.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:15:38 -07:00
Roland Dreier b168fe8cfe target: Fix sense code for unsupported SERVICE ACTION IN
If we don't handle a given service action, we're supposed to return
INVALID FIELD IN CDB, since we do handle the SERVICE ACTION IN opcode.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:14:53 -07:00
Roland Dreier 1f6fa8f817 target: Remove hack to make READ CAPACITY(10) lie if thin provisioning is enabled
Remove the hack that has READ CAPACITY(10) return 0xFFFFFFFF as the
number of sectors when thin provisioning is enabled.  This is supposed
to trigger the initiator to use READ CAPACITY(16) in this case so that
it finds out about thin provisioning.  But an initiator that cares about
thin provisioning is going to ask anyway, and an initiator that doesn't
know about READ CAPACITY(16) is going to get the wrong capacity.  So
just have READ CAPACITY(10) return the size it's supposed to.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-15 19:14:48 -07:00
Nicholas Bellinger 00fdc6bbef iscsi-target: Fix reservation conflict -EBUSY response handling bug
This patch addresses a iscsi-target specific bug related to reservation conflict
handling in iscsit_handle_scsi_cmd() that has been causing reservation conflicts
to complete and not fail as expected due to incorrect errno checking.  The problem
occured with the change to return -EBUSY from transport_generic_cmd_sequencer() ->
transport_generic_allocate_tasks() failures, that broke iscsit_handle_scsi_cmd()
checking for -EINVAL in order to invoke a non GOOD status response.

This was manifesting itself as data corruption with legacy SPC-2 reservations,
but also effects iscsi-target LUNs with SPC-3 persistent reservations.

This bug was originally introduced in lio-core commit:

commit 03e98c9eb9
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Fri Nov 4 02:36:16 2011 -0700

    target: Address legacy PYX_TRANSPORT_* return code breakage

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-13 21:43:58 -07:00
Nicholas Bellinger 087a03b3ea target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE
This patch addresses a bug with target_check_scsi2_reservation_conflict()
return checking in target_scsi2_reservation_[reserve,release]() that was
preventing CRH=1 operation from silently succeeding in the two special
cases defined by SPC-3, and not failing with reservation conflict status
when dealing with legacy RESERVE/RELEASE + active SPC-3 PR logic.

Also explictly set cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT during
the early non reservation holder failure from pr_ops->t10_seq_non_holder()
check in transport_generic_cmd_sequencer() for fabrics that already expect
it to be set.

This bug was originally introduced in mainline commit:

commit eacac00ce5
Author: Christoph Hellwig <hch@infradead.org>
Date:   Thu Nov 3 17:50:40 2011 -0400

    target: split core_scsi2_emulate_crh

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-13 21:43:43 -07:00
Nicholas Bellinger 9765b1f327 target: Bump core version to v4.1.0-rc2-ml + fabric versions
Bump core version to v4.1.0-rc2-ml, and for versions from the
following mainline fabric modules:

loopback: v2.1-rc2
tcm_fc: v0.4
iscsi-target: v4.1.0-rc2

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:55:17 -08:00
Nicholas Bellinger 031ed4d565 tcm_fc: Fix fc_exch memory leak in ft_send_resp_status
This patch fixes a bug in tcm_fc where fc_exch memory from fc_exch_mgr->ep_pool
is currently being leaked by ft_send_resp_status() usage.  Following current
code in ft_queue_status() response path, using lport->tt.seq_send() needs to be
followed by a lport->tt.exch_done() in order to release fc_exch memory back into
libfc_em kmem_cache.

ft_send_resp_status() code is currently used in pre submit se_cmd ft_send_work()
error exceptions, TM request setup exceptions, and main TM response callback
path in ft_queue_tm_resp().  This bugfix addresses the leak in these cases.

Cc: Mark D Rustad <mark.d.rustad@intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:56 -08:00
Nicholas Bellinger c7ec05c82b target: Drop unused legacy target_core_fabric_ops API callers
This patch drops the following unused legacy API callers from target_core_fabric.h:

*) TFO->fall_back_to_erl0()
*) TFO->stop_session()
*) TFO->sess_logged_in()
*) TFO->is_state_remove()

This patch also removes the stub usage in loopback, tcm_fc, iscsi_target,
and ib_srpt fabric modules.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:55 -08:00
Nicholas Bellinger 99367f01b8 iscsi-target: Convert to use target_put_session + sess_kref
This patch converts iscsi-target session code to use se_sess->sess_kref
counting for iscsi session shutdown.  The following cases include:

*) last iscsit_close_connection() shutdown path to invoke close session
*) iscsit_logout_post_handler_closesession() for explict logout
*) iscsit_free_session() caller for explict shutdown

It also moves iscsit_stop_session() call from lio_tpg_close_session()
into lio_tpg_shutdown_session() TFO callbacks to invoke an explict
shutdown, and also changes iscsi_check_for_session_reinstatement()
login code to use se_sess->sess_kref.

(v2: Make iscsit_handle_time2retain_timeout() use target_put_session)

Cc: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:25 -08:00
Nicholas Bellinger 337c060701 target: Convert se_node_acl->acl_group removal to use ->acl_kref
This patch converts core_tpg_del_initiator_node_acl() shutdown from configfs
context to use se_node_acl->acl_kref and ->acl_free_comp in order to wait for
outstanding fabric callbacks to complete via transport_deregister_session()
callbacks before waking ->acl_free_comp from the last ->acl_kref put.

It also changes core_tpg_del_initiator_node_acl() to setup a local sess_list
with target_get_session() + acl->acl_stop = 1 for active sessions that will
be shutdown, and changes transport_deregister_session_configfs() to check
for ->acl_stop usage.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:19 -08:00
Nicholas Bellinger afb999ffc4 target: Add se_node_acl->acl_kref for ->acl_free_comp usage
This patch adds se_node_acl->acl_kref for use with ->acl_free_comp
during explict se_node_acl release.  It adds kref_init() during
se_node_acl setup, kref_get() during __transport_register_session()
-> target_put_nacl() with existing transport_deregister_session()
fabric callback usage.

It also moves transport_free_session() to release *se_sess memory
after target_put_nacl() execution in transport_deregister_session()

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:42:09 -08:00
Nicholas Bellinger 0146834654 target: Add se_node_acl->acl_free_comp for NodeACL release path
Add se_node_acl->acl_free_comp for NodeACL release path to wait for outstanding
fabric session shutdown to complete in transport_deregister_session() before
finishing NodeACL release from configfs process context.

Also make transport_deregister_session() clear the comp_nacl bit
to skip se_node_acl->acl_free_comp completion for dynamically generated
NodeACL during fabric session shutdown.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:41:59 -08:00
Nicholas Bellinger 41ac82b668 target: Add se_sess->sess_kref + get/put helpers
This patch adds basic se_session->sess_kref and get/put helpers for fabric
session reference counting.  It sets the initial kref in transport_init_session()
and adds a target_release_session() callback to invoke TFO->close_session()
for final session shutdown.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Joern Engel <joern@logfs.org>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 14:41:53 -08:00
Nicholas Bellinger 140854cb72 target: Convert session_lock to irqsave
This patch converts the remaining struct se_portal_group->session_lock
usage to use irqsave+irqrestore to address the following warnings for
hardware target mode interrupt context usage.  This change generate
other warnings for current iscsi-target mode still using ->session_lock
with spin_lock_bh, which will need to be converted in a seperate patch.

[  492.480728] [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
[  492.488194] 3.0.0+ #23
[  492.490820] ------------------------------------------------------
[  492.497704] sh/7162 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[  492.504493] (&(&se_tpg->session_lock)->rlock){+.....}, at: [<ffffffffa022364d>] transport_deregister_session+0x2d/0x163 [target_core_mod]
  492.518390]
[  492.518390] and this task is already holding:
[  492.524897] (&(&ha->hardware_lock)->rlock){-.-...}, at: [<ffffffffa00b9146>] qla_tgt_stop_phase1+0x5e/0x27e [qla2xxx]
[  492.536856] which would create a new lock dependency:
[  492.542481] (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->session_lock)->rlock){+.....}
[  492.552321]
[  492.552321] but this new dependency connects a HARDIRQ-irq-safe lock:
[  492.561149] (&(&ha->hardware_lock)->rlock){-.-...}
[  492.566400] ... which became HARDIRQ-irq-safe at:
[  492.571841]   [<ffffffff81064720>] __lock_acquire+0x68f/0x921
[  492.578247]   [<ffffffff81064eff>] lock_acquire+0xe0/0x10d
[  492.584367]   [<ffffffff813a74c6>] _raw_spin_lock_irqsave+0x44/0x56
[  492.591358]   [<ffffffffa009b1be>] qla24xx_msix_default+0x5c/0x2aa [qla2xxx]
[  492.599227]   [<ffffffff81088582>] handle_irq_event_percpu+0x5a/0x197
[  492.606413]   [<ffffffff810886fb>] handle_irq_event+0x3c/0x5c
[  492.612822]   [<ffffffff8108a6dc>] handle_edge_irq+0xcc/0xf1
[  492.619138]   [<ffffffff810039b9>] handle_irq+0x83/0x8e
[  492.624971]   [<ffffffff8100333e>] do_IRQ+0x48/0xaf
[  492.630413]   [<ffffffff813a7cd3>] ret_from_intr+0x0/0x1a
[  492.636437]   [<ffffffff81001dc1>] cpu_idle+0x5b/0x8d
[  492.642073]   [<ffffffff81392709>] rest_init+0xad/0xb4
[  492.647809]   [<ffffffff81a1cbbc>] start_kernel+0x366/0x371
[  492.654030]   [<ffffffff81a1c2b1>] x86_64_start_reservations+0xb8/0xbc
[  492.661311]   [<ffffffff81a1c3b6>] x86_64_start_kernel+0x101/0x110
[  492.668204]
[  492.668205] to a HARDIRQ-irq-unsafe lock:
[  492.674324] (&(&se_tpg->session_lock)->rlock){+.....}
[  492.679862] ... which became HARDIRQ-irq-unsafe at:
[  492.685497] ...  [<ffffffff8106479a>] __lock_acquire+0x709/0x921
[  492.692209]   [<ffffffff81064eff>] lock_acquire+0xe0/0x10d
[  492.698330]   [<ffffffff813a75ed>] _raw_spin_lock_bh+0x31/0x40
[  492.704836]   [<ffffffffa021c208>] core_tpg_del_initiator_node_acl+0x89/0x336 [target_core_mod]
[  492.714546]   [<ffffffffa02fb075>] tcm_qla2xxx_drop_nodeacl+0x20/0x2d [tcm_qla2xxx]
[  492.723087]   [<ffffffffa02108d9>] target_fabric_nacl_base_release+0x22/0x24 [target_core_mod]
[  492.732698]   [<ffffffffa01661c8>] config_item_release+0x7d/0xa3 [configfs]
[  492.740465]   [<ffffffff811d48fe>] kref_put+0x43/0x4d
[  492.746101]   [<ffffffffa0166149>] config_item_put+0x19/0x1b [configfs]
[  492.753481]   [<ffffffffa0164987>] configfs_rmdir+0x1eb/0x258 [configfs]
[  492.760957]   [<ffffffff810ecc54>] vfs_rmdir+0x79/0xd0
[  492.766690]   [<ffffffff810eec4a>] do_rmdir+0xc2/0x111
[  492.772423]   [<ffffffff810eecd0>] sys_rmdir+0x11/0x13
[  492.778156]   [<ffffffff813ae4d2>] system_call_fastpath+0x16/0x1b
[  492.784953]

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 13:59:03 -08:00
Masanari Iida 5e58b02997 target: Fix typo in drivers/target
Correct spelling "exeeds" to "exceeds" in iscsi/iscsi_target_nego.c
Correct spelling "diabled" to "disabled" in target_core_configfs.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-10 13:55:05 -08:00
Nicholas Bellinger d06283341a iscsi-target: Fix dynamic -> explict NodeACL pointer reference
This patch fixes a free after use in lio_target_make_nodeacl() where
iscsi_node_acl was referenced from the original se_nacl_new allocation,
instead of from core_tpg_add_initiator_node_acl() in the case of dynamic
-> explict NodeACL conversion.

Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-03-08 12:10:56 -08:00
Nicholas Bellinger c0974f8938 target: Allow target_submit_tmr interrupt context + pass ABORT_TASK tag
This patch allows target_submit_tmr() to pass gfp_t for se_cmd->se_tmr_req
allocation, and also set up se_cmd->se_tmr_req->ref_task_tag for passed
tag with TMR_ABORT_TASK.

Also update tcm_fc(fcoe) parameter usgae and add ref_task_tag FIXME
for TMR_ABORT_TASK usage,

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:39:13 -08:00
Nicholas Bellinger 9f0d05c2c6 target: Push target_submit_tmr LUN lookup failure to system_wq context
In order to handle incoming target_submit_tmr() callers using interrupt
context, use system_wq process context for transport_lookup_tmr_lun()
failures to return TMR_LUN_DOES_NOT_EXIST status for fabric TM response.

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:38:41 -08:00
Nicholas Bellinger 00ad4c4e81 tcm_fc: Handle target_submit_tmr allocation failure
This patch makes ft_send_tm() handle target_submit_tmr() allocation failures
via an ft_send_resp_code_and_free() w/ FCP_TMF_FAILED status.

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:38:39 -08:00
Nicholas Bellinger c7042cae58 target: Fix target_submit_tmr se_tmr_req allocation failures
This patch makes target_submit_tmr() se_tmr_req allocation occur before
target_get_sess_cmd(), and changes target_submit_tmr() to return a failure
w/ non zero status to the fabric caller upon core_tmr_alloc_req() failure.

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 18:38:34 -08:00
Nicholas Bellinger 3de55ec74a target: Fix target_submit_tmr LUN lookup failures
This patch changes target_submit_tmr() LUN lookup failures to set response
status TMR_LUN_DOES_NOT_EXIST and invoke TFO->queue_tm_rsp(), instead of
sending CHECK_CONDITION status that can cause problems with Linux FCoE
clients.

Tested with tcm_fc ports and explict LUN_RESET lookup failures.

Cc: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:51 -08:00
Nicholas Bellinger d335e6054d iscsi-target: Fix iscsit_alloc_buffs() failure cases
Make iscsit_alloc_buffs() failure case for page_alloc_failed use correct
__free_page() SGL pointer, and return -ENOMEM for iscsit_allocate_iovecs
failure to push se_cmd->t_mem_sg release into iscsit_release_cmd()
callback during iscsit_add_reject_from_cmd() connection reset.

Also drop cmd->t_mem_sg = NULL assignment from page_alloc_failed
failure case.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Roland Dreier 33395fb8a1 target: Fix 16-bit target ports for SET TARGET PORT GROUPS emulation
The old code did (MSB << 8) & 0xff, which always evaluates to 0.  Just use
get_unaligned_be16() so we don't have to worry about whether our open-coded
version is correct or not.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Stefan Hajnoczi e6a8a41a30 target/pscsi: fix PHV_VIRUTAL_HOST_ID typo
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Jörn Engel 99f730d88f target: Fix off-by-seven in target_report_luns
cdb_offset is always equal to offset - 8, so remove that one.  More
importantly, the existing code only worked correct if
se_cmd->data_length is a multiple of 8.  Pass in a length of, say, 9 and
we will happily overwrite 7 bytes of "unallocated" memory.

Now, afaics this bug is currently harmless, as allocations will
implicitly be padded to multiples of 8 bytes.  But depending on such a
fact wouldn't qualify as sound engineering practice.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Jörn Engel 47f1b8803e target: prevent NULL pointer dereference in target_report_luns
transport_kmap_data_sg can return NULL.  I never saw this trigger, but
returning -ENOMEM seems better than a crash.  Also removes a pointless
case while at it.

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Jörn Engel 382436f880 target: fix use after free in target_report_luns
Fix possible NULL pointer dereference in target_report_luns failure path.

Signed-off-by: Joern Engel <joern@logfs.org>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Roland Dreier 6cf3fa6918 tcm_loop: Set residual field for SCSI commands
If the target core signals an over- or under-run, tcm_loop should call
scsi_set_resid() to tell the SCSI midlayer about the residual data length.

The difference can be seen by doing something like

    strace -eioctl sg_raw -r 1024 /dev/sda 8 0 0 0 1 0 > /dev/null

and looking at the "resid=" part of the SG_IO ioctl -- after this patch,
the field is correctly reported as 512.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:50 -08:00
Roland Dreier 015487b89f target: Untangle front-end and back-end meanings of max_sectors attribute
se_dev_attrib.max_sectors currently has two independent meanings:

 - It is reported in the block limits VPD page as the maximum transfer
   length, ie the largest IO that the front-end (fabric) can handle.
   Also the target core doesn't enforce this maximum transfer length.

 - It is used to hold the size of the largest IO that the back-end can
   handle, so we know when to split SCSI commands into multiple tasks.

Fix this by adding a new se_dev_attrib.fabric_max_sectors to hold the
maximum transfer length, and checking incoming IOs against that limit.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Roland Dreier effc6cc882 target: Don't set WBUS16 or SYNC bits in INQUIRY response
SPC-4 says about the WBUS16 and SYNC bits:

    The meanings of these fields are specific to SPI-5 (see 6.4.3).
    For SCSI transport protocols other than the SCSI Parallel
    Interface, these fields are reserved.

We don't have a SPI fabric module, so we should never set these bits.
(The comment was misleading, since it only mentioned Sync but the
actual code set WBUS16 too).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Roland Dreier 089461dda1 target: Set peripheral device type consistently in INQUIRY response
Current code sets the peripheral device type to 0x3f == "not present
unknown" for virtual LUN 0 for standard INQUIRY commands, but leaves it
as 0 == "connected direct access block" for VPD INQUIRY commands.  This
is just because the check for LUN 0 only happens in some code paths.

Make our peripheral device type consistent by moving the LUN 0 check
into the common emulate_inquiry() code.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Roland Dreier d95b82461c target: Fix up handling of short INQUIRY buffers
If the initiator sends us an INQUIRY command with an allocation length
that's shorter than what we want to return, we're simply supposed to
truncate our response and return what the initiator gave us space for,
without signaling any error.  Current target code has various tests that
don't fill out the full response if the buffer is too short and
sometimes return errors incorrectly.

Fix this up by allocating a bounce buffer for INQUIRY responses if we
need to, ie if we have cmd->data_length too small as well as
SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC set in cmd->se_cmd_flags -- for most
fabrics, we always allocate at least a full page, but for tcm_loop we
may have a small buffer coming directly from the SCSI stack.

This lets us delete a lot of cmd->data_length checking, and also makes
our INQUIRY handling correct per SPC in a lot more cases.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Nicholas Bellinger 3d28934aaa target: Add TMR_ABORT_TASK task management support
This patch adds initial support for TMR_ABORT_TASK ops for se_cmd
descriptors using se_sess->sess_cmd_list and se_cmd->cmd_kref counting.

It will perform an explict abort for all outstanding se_cmd ops based
upon tmr->ref_task_tag that have not been set CMD_T_COMPLETE.
It will cancel se_cmd->work and wait for backing I/O to complete before
attempting to send SAM_STAT_TASK_ABORTED and perform
target_put_sess_cmd() to release the referenced descriptor.

It also adds a CMD_T_ABORTED check into transport_complete_task() to
catch the completion from backend I/O that has been aborted, and
updates transport_wait_for_tasks() to allow CMD_T_ABORTED usage with
core_tmr_abort_task() context.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Nicholas Bellinger ffc32d5259 target: Make target_release_cmd_kref release on empty list
This patch changes target_release_cmd_kref() to make TFO->release_cmd()
call when list_empty(&se_cmd->se_cmd_list) is TRUE.  This is required
for TMR_ABORT_TASK operation where the referenced tag descriptor may
have already been pulled of the session command list.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Nicholas Bellinger 86715569d0 target: Add SCF_ACK_KREF flag for acknowledgement kref
When TARGET_SCF_ACK_KREF is in use with target_submit_cmd() for
setting the extra acknowledgement reference to se_cmd->cmd_kref,
go ahead and set SCF_ACK_KREF in order to be used later by
abort task.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:49 -08:00
Nicholas Bellinger 2fbff1276b target: Export transport_generic_request_failure symbol
transport_generic_request_failure() is a wrapper around calling
transport_send_check_condition_and_sense() that is required once
an se_cmd->cmd_kref has been obtained via target_submit_cmd() ->
target_get_sess_cmd().

tcm_qla2xxx currently requires this, and since it's necessary for
other callers using target_submit_cmd() make it exportable now.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Andy Grover a1edf9cf6d target: Cleanup transport_kunmap_data_sg()
This code isn't broken per se, but it's scary to look at! It looks like
in the t_data_nents==1 case we're doing both a kunmap and a vunmap,
what's saving us is that t_data_vmap in this case is 0, so vunmap
doesn't do anything.

Return after kunmap, so the handling of the three cases does not overlap.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Christoph Hellwig 16786454ac tcm_loop: switch to using transport_handle_cdb_direct
Now that we use a workqueue for I/O submission there is no need to use
transport_generic_handle_cdb_map any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Christoph Hellwig afe2cb7fb1 tcm_loop: defer all command submissions to workqueue
Apply the qla2xxx model of submitting all commands from a workqueue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Christoph Hellwig f872c9f417 tcm_loop: kill tcm_loop_allocate_core_cmd
This function makes little sense as a separate abstraction as it's deeply
interwinded with the control flow of its only caller.  Merged it into
tcm_loop_queuecommand after factoring out a helper to convert the task
attribute representation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Andy Grover 59dcb5ec47 tcm_fc: Convert ft_send_tm to use target_submit_tmr
Change ft_send_tm() make use of the new target_submit_tmr helper

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Andy Grover ea98d7f9c7 target: Add target_submit_tmr helper function
Similar to target_submit_cmd, this function lets fabrics call one function
(albeit with a lot of parameters) instead of 3 or more.

(nab: Add missing return for transport_lookup_tmr_lun failure)

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Andy Grover a1321f71e8 tcm_fc: Use transport_generic_free_cmd for ft_sess_put in ft_send_tm
transport_generic_free_cmd will end up calling ft_sess_put, so it should
work just the same.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:48 -08:00
Andy Grover 06fb6313d9 tcm_fc: Call lookup_tmr_lun() for all TM types
Don't see a reason to differentiate, so drop the fabric specific
switch statement in ft_send_tm() ahead of conversion to use
target_submit_tmr().

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover 5ebddd48ff tcm_fc: Move core->fc code conversion earlier in ft_send_tm()
No dependencies on rest of code, let's get tm_func set asap.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover c8e31f26fe target: Add SCF_SCSI_TMR_CDB usage and drop se_tmr_req_cache
Change the test for if a cmd is a tmr request to checking if
SCF_SCSI_TMR_CDB (a new flag) is set in cmd->se_cmd_flags.

Also remove se_tmr_req_cache usage in favor of kzalloc usage,
and make core_tmr_alloc_req() return int + setup se_cmd->se_tmr_req
directly and fix up various fabric module usages

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover 35b2cdc4fe tcm_fc: Remove cmd->cdb data member
It's used only for debug output. Debug output may want to make use of
fcp->fc_cdb directly.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover 0dccb69d42 tcm_fc: Simplify ft_send_work for tmr path
Check fc_tm_flags early and call ft_send_tm() right away. Don't need to
set local vars for tm case.

data_len local var now unneeded, remove.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover 4f26998a79 target/iscsi: Remove unneeded wrapper functions
iscsit_get_lun_for_{cmd,tmr} are unnecessary.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:47 -08:00
Andy Grover e35fa8c2d0 scsi: Use struct scsi_lun in fc/fcp.h
This allows us to use scsilun_to_int without an ugly cast.

Fix up places that use scsilun_to_int on fcp->fc_lun accordingly.

In fc target, this leaves ft_cmd.lun unused, so remove it.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Andy Grover 8e94b8db61 target: Use #define for SYNCHRONIZE_CACHE_16
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Roland Dreier d0f474e501 target: Use LIST_HEAD()/DEFINE_MUTEX() for static objects
Instead of

   static struct list_head foo;
   static struct mutex bar;

   ...

   INIT_LIST_HEAD(&foo);
   mutex_init(&bar);

just do

   static LIST_HEAD(foo);
   static DEFINE_MUTEX(bar);

Also remove some superfluous struct list_head and spinlock_t
initialization calls where the variables are already defined using
macros that initialize them.

This saves a decent amount of compiled code too:

    add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-178 (-178)
    function                                     old     new   delta
    target_core_init_configfs                    898     850     -48
    core_scsi3_emulate_pro_preempt              1742    1683     -59
    iscsi_thread_set_init                        159      88     -71

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Christoph Hellwig d5b4a21b3d target: increase iblock task sizes
There is no real limit for task sizes in the iblock driver given that we
can chain bios.  Increase the maximum size to UINT_MAX, and change the
code to submit bios in a smaller batch size to avoid deadlocks when
having more bios in flight than the pool supports.  Also increase the
pool size to always allow multiple tasks to be in flight.

I also had to change the task refcounting to include one reference for
the submission task, which is a standard practice in this kind of code
in Linux (e.g. XFS I/O submission).  This was wrong before, but couldn't
be hit easily.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Christoph Hellwig 6e315a066d target: remove the unused struct iblock_hba
There is no reason to allocate a struct just to store the host number for
a debug printk in the detach path.  I've simply removed the verbose
debugging given that the calling code thinks the number passed in is
something different from a host ID anyway.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Christoph Hellwig 3d26fea01d target: remove the transport_lun_active field in struct se_cmd
There is no reason to have a flag telling if a command is on the per-lun list,
we can simply do a list_empty check before removing it as long as we're careful
to always use list_del_init.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:46 -08:00
Christoph Hellwig 7d680f3b74 target: replace various cmd flags with a transport state
Replace various atomic_ts used as flags in struct se_cmd with a single
transport_state bitmap that requires t_state_lock to be held for modifications.

In the target core that assumption generally is true, but some recently added
code in the SRP target had to grow new lock calls.  I can't say I like the way
how it messes with the command state directly, but let's leave that for later.

(Re-add missing ib_srpt.c changes that nab dropped..)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-25 14:37:45 -08:00
Paul E. McKenney a6c76da8f8 tcm_fc: Convert call_rcu() to kfree_rcu(), drop ft_tport_rcu_free()
The call_rcu() in ft_tport_delete() invokes ft_tport_rcu_free(),
which just does a kfree().  So convert the call_rcu() to kfree_rcu(),
allowing ft_tport_rcu_free() to be eliminated.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
2012-02-21 09:03:29 -08:00
Al Viro 4040153087 security: trim security.h
Trim security.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-14 10:45:42 +11:00
Martin Svec 67236c4474 target: Fix unsupported WRITE_SAME sense payload
This patch fixes a bug in target-core where unsupported WRITE_SAME ops
from a target_check_write_same_discard() failure was incorrectly
returning CHECK_CONDITION w/ TCM_INVALID_CDB_FIELD sense data.
This was causing some clients to not properly fall back, so go ahead
and use the correct TCM_UNSUPPORTED_SCSI_OPCODE sense for this case.

Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:58 +00:00
Dax Kelson 9f9ef6d3c0 iscsi: use IP_FREEBIND socket option
Use IP_FREEBIND socket option so that iscsi portal configuration with
explicit IP addresses can happen during boot, before network interfaces
have been assigned IPs.

This is especially important on systemd based Linux boxes where system
boot happens asynchronously and non-trivial configuration must be done
to get targetcli.service to start synchronously after the network is
configured.

Reference:
http://lists.fedoraproject.org/pipermail/devel/2011-October/158025.html

Signed-off-by: Dax Kelson <dkelson@gurulabs.com>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: "Andy Grover" <agrover@redhat.com>
Cc: "Lennart Poettering" <lennart@poettering.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:53 +00:00
Christoph Hellwig 5c55125f47 iblock: fix handling of large requests
Requesting to many bvecs upsets bio_alloc_bioset, so limit the number we ask
for to the amount it can handle.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:46 +00:00
Dan Carpenter 3011684c0b target: handle empty string writes in sysfs
These are root only and we're not likely to hit the problem in practise,
but it makes the static checkers happy.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:40 +00:00
Stephen Rothwell c3bc93da24 iscsi_target: in_aton needs linux/inet.h
Fixes this error after a recent nfs cleanup:

drivers/target/iscsi/iscsi_target_configfs.c: In function 'lio_target_call_addnptotpg':
drivers/target/iscsi/iscsi_target_configfs.c:214:3: error: implicit declaration of function 'in6_pton' [-Werror=implicit-function-declaration]
drivers/target/iscsi/iscsi_target_configfs.c:239:3: error: implicit declaration of function 'in_aton' [-Werror=implicit-function-declaration]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:30 +00:00
Marco Sanvido 7347b5ff70 target: Fix iblock se_dev_attrib.unmap_granularity
The block layer keeps q->limits.discard_granularity in bytes, but iblock
(and the SCSI Block Limits VPD page) keep unmap_granularity in blocks.
Report the correct value when exporting block devices by dividing to
convert bytes to blocks.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:48:20 +00:00
Nicholas Bellinger 735703cac0 target: Fix target_submit_cmd() exception handling
This patch fixes a bug in target_submit_cmd() where the failure path
for transport_generic_allocate_tasks() made a direct call to
transport_send_check_condition_and_sense() and not calling the
final target_put_sess_cmd() release callback.

For transport_generic_allocate_tasks() failures, use the proper call to
transport_generic_request_failure() to handle kref_put() along
with potential internal queue full response processing.

It also makes transport_lookup_cmd_lun() failures in
target_submit_cmd() use transport_send_check_condition_and_sense() and
target_put_sess_cmd() directly to avoid se_cmd->se_dev reference in
transport_generic_request_failure() handling.

Finally it drops the out_check_cond: label and use direct reference for
allocate task failures, and per-se_device queue_full handling is
currently not supported for transport_lookup_cmd_lun() failure
descriptors due to se_device dependency.

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:47:11 +00:00
Andy Grover 1edcdb497e target: Change target_submit_cmd() to return void
Retval not very useful, and may even be harmful. Once submitted, fabrics
should expect a sense error if anything goes wrong. All fabrics checking
of this retval are useless or broken:

fc checks it just to emit more debug output.
ib_srpt trickles retval up, then it is ignored.
qla2xxx trickles it up, which then causes a bug because the abort goto
in qla_target.c thinks cmd hasn't been sent to target.

Just returning nothing is best.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:41:04 +00:00
Sebastian Andrzej Siewior 95fe1ee41e target: accept REQUEST_SENSE with 18bytes
WindowsXP+BOT issues a MODE_SENSE request with page 0x1c which is not
suppoerted by target. Target rejects that command with
TCM_INVALID_CDB_FIELD, so far so good. On BOT I can't send the SENSE
response back, instead I can only reply that an error occured. The next
thing happens is a REQUEST_SENSE request with 18 bytes length. Since the
check here is more than 18 bytes I have to NACK that request as well.
This is not really required: We check for some additional room, but we
never use it. The additional length is set to 0xa so the total length is
0xa + 8 = 18 which is fine with my 18 bytes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-02-07 06:32:39 +00:00
Roland Dreier bf0053550a target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0
My draft of SPC-4 says:

    If the PAGE CODE field is not set to zero when the EVPD bit is set
    to zero, the command shall be terminated with CHECK CONDITION
    status, with the sense key set to ILLEGAL REQUEST, and the
    additional sense code set to INVALID FIELD IN CDB.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:59 +00:00
Roland Dreier bb1acb2ee0 target: Return correct ASC for unimplemented VPD pages
My draft of SPC-4 says:

    If the device server does not implement the requested vital product
    data page, then the command shall be terminated with CHECK CONDITION
    status, with the sense key set to ILLEGAL REQUEST, and the
    additional sense code set to INVALID FIELD IN CDB.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:58 +00:00
Nicholas Bellinger 2f9bc894c6 iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT
This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0)
+ IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being
reported back to initiators instead of the address of the connecting interface.
To address this, save local socket ->getname() output during iscsi login setup,
and makes iscsit_build_sendtargets_response() return these TargetAddress keys
when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use.

Reported-by: Dax Kelson <dkelson@gurulabs.com>
Reported-by: Andy Grover <agrover@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:58 +00:00
Andy Grover 4949314c72 target: Allow control CDBs with data > 1 page
We need to handle >1 page control cdbs, so extend the code to do a vmap
if bigger than 1 page. It seems like kmap() is still preferable if just
a page, fewer TLB shootdowns(?), so keep using that when possible.

Rename function pair for their new scope.

Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:58 +00:00
Jesper Juhl e8904dc500 iscsi-target: Fix up a few assignments
A statement such as
  struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess);
has undefined behaviour since there are two assignments to 'na', strictly
speaking (the order in which side-effects from the assignments take place
is undefined since there's no intervening sequence point), and it looks
unintentional in any case.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:57 +00:00
Dan Carpenter f8d48ae52e iscsi-target: make one-bit bitfields unsigned
Signed bitfields are a problem because instead of being 1 or 0 like
you'd expect they are 0 and -1.  It doesn't cause a problem in this case
but sparse complains:

drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit
signed bitfield

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:57 +00:00
Nicholas Bellinger cd931ee62f iscsi-target: Fix double list_add with iscsit_alloc_buffs reject
This patch fixes a bug where the iscsit_add_reject_from_cmd() call
from a failure to iscsit_alloc_buffs() was incorrectly passing
add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list
had already been added in iscsit_handle_scsi_cmd().

Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:57 +00:00
Nicholas Bellinger c1ce4bd56f iscsi-target: Fix reject release handling in iscsit_free_cmd()
This patch addresses a bug where iscsit_free_cmd() was incorrectly calling
iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will
overwrite the original iscsi_cmd->iscsi_opcode assignment.  This bug was
introduced with the following commit:

commit 0be67f2ed8f577d2c72d917928394c5885fa9134
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Sun Oct 9 01:48:14 2011 -0700

    iscsi-target: Remove SCF_SE_LUN_CMD flag abuses

and was manifesting itself as list corruption with the following:

[  131.191092] ------------[ cut here ]------------
[  131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98()
[  131.191092] Hardware name: VMware Virtual Platform
[  131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b
[  131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan]
[  131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G        W    3.2.0-rc4+ #42
[  131.191092] Call Trace:
[  131.191092]  [<ffffffff8103b553>] warn_slowpath_common+0x80/0x98
[  131.191092]  [<ffffffff8103b5ff>] warn_slowpath_fmt+0x41/0x43
[  131.191092]  [<ffffffff811d0279>] __list_del_entry+0x8d/0x98
[  131.191092]  [<ffffffffa01395c9>] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod]
[  131.191092]  [<ffffffffa013a55c>] transport_generic_free_cmd+0x5d/0x71 [target_core_mod]
[  131.191092]  [<ffffffffa01a012b>] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod]
[  131.191092]  [<ffffffffa01a13be>] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod]
[  131.191092]  [<ffffffffa0196a0c>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod]
[  131.191092]  [<ffffffffa01a55d4>] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod]
[  131.191092]  [<ffffffff8103609a>] ? check_preempt_wakeup+0x121/0x185
[  131.191092]  [<ffffffff81030801>] ? __dequeue_entity+0x2e/0x33
[  131.191092]  [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod]
[  131.191092]  [<ffffffffa01a4009>] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod]
[  131.191092]  [<ffffffff8138f706>] ? schedule+0x55/0x57
[  131.191092]  [<ffffffff81056c7d>] kthread+0x7d/0x85
[  131.191092]  [<ffffffff81399534>] kernel_thread_helper+0x4/0x10
[  131.191092]  [<ffffffff81056c00>] ? kthread_worker_fn+0x16d/0x16d
[  131.191092]  [<ffffffff81399530>] ? gs_change+0x13/0x13

Reported-by: <jrepac@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:35:56 +00:00
Sebastian Andrzej Siewior 8d9efe539c target: fix return code of core_tpg_.*_lun
- core_tpg_pre_addlun()
  returns always ERR_PTR() or the pointer, never NULL. The additional
  check for NULL in core_dev_add_lun() is not required.

- core_tpg_pre_dellun()
  returns always ERR_PTR() or the pointer, never NULL. The check for NULL
  in core_dev_del_lun() is wrong. The third argument (int *) is never
  used, remove it.

- core_dev_add_lun()
  returns always NULL or the pointer, never ERR_PTR. The check for
  IS_ERR() is not required.

(nab: Convert core_dev_add_lun() use err.h macros for failure
handling to be consistent with the rest of target_core_fabric_configfs.c
callers)

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:33:44 +00:00
Sebastian Andrzej Siewior 1dd0a06745 target: use save/restore lock primitive in core_dec_lacl_count()
It may happen that uasp will free the request in irq conntext, the
callchain:

 uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count()

where the last function enables the IRQ. Those irqs are re-disabled
later (due to the spin.*irq_restore) but in between we could get hurt.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:30:39 +00:00
Sebastian Andrzej Siewior e59a41b69a target: avoid multiple outputs in scsi_dump_inquiry()
The multiple calls to pr_debug() each with one letter results in a new
line. This patch merges the multiple requests into one call per line
so we don't have the multiple line cuts.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:30:36 +00:00
Nicholas Bellinger 91ec1d3535 target: Add workaround for zero-length control CDB handling
This patch adds a work-around for handling zero allocation length
control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an
OOPs with the following raw calls:

   # sg_raw -v /dev/sdd 3 0 0 0 0 0
   # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0

This patch will follow existing zero-length handling for data I/O
and silently return with GOOD status.  This addresses the zero length
issue, but the proper long-term resolution for handling arbitary
allocation lengths will be to refactor out data-phase handling in
individual CDB emulation logic within target_core_cdb.c

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:30:22 +00:00
Roland Dreier 9fbc890987 target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB}
According to SPC-4, the sense key for commands that are failed with
INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be
ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh).  Without this
patch, a tcm_loop LUN incorrectly gives:

    # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0
    Sense Information:
     Fixed format, current;  Sense key: Aborted Command
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 0b 00 00 00 00 0a  00 00 00 00 24 00 00 00
            00 00

While a real SCSI disk gives:

    Sense Information:
     Fixed format, current;  Sense key: Illegal Request
     Additional sense: Invalid field in cdb
     Raw sense data (in hex):
            70 00 05 00 00 00 00 18  00 00 00 00 24 00 00 00
            00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00

with the main point being that the real disk gives a sense key of
ILLEGAL REQUEST (5h).

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:30:05 +00:00
roland@purestorage.com 9db9da3322 target: Don't zero pages used for data buffers
Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data
buffers wastes a lot of CPU clearing pages that will be quickly be
overwritten by the actual data.  However, for emulated control
commands such as INQUIRY and so on, the code does assume that the
buffer is zeroed.

To avoid this CPU overhead, skip the __GFP_ZERO for commands that are
actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:29:57 +00:00
Marco Sanvido 6816966a84 target: Allow PERSISTENT RESERVE IN for non-reservation holder
Initiators that aren't the active reservation holder should be able to
do a PERSISTENT RESERVE IN command in all cases, so add it to the list
of allowed CDBs in core_scsi3_pr_seq_non_holder().

Signed-off-by: Marco Sanvido <marco@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:29:36 +00:00
Marco Sanvido 9e08e34e37 target: Use correct preempted registration sense code
The comments quote the right parts of the spec:

   * d) Establish a unit attention condition for the
   *    initiator port associated with every I_T nexus
   *    that lost its registration other than the I_T
   *    nexus on which the PERSISTENT RESERVE OUT command
   *    was received, with the additional sense code set
   *    to REGISTRATIONS PREEMPTED.

and

   * e) Establish a unit attention condition for the initiator
   *    port associated with every I_T nexus that lost its
   *    persistent reservation and/or registration, with the
   *    additional sense code set to REGISTRATIONS PREEMPTED;

but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED
instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED.  Fix this.

Signed-off-by: Marco Sanvido <marco@purestorage.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:28:43 +00:00
Christoph Hellwig 48cfe37cc0 target: don't allocate bio headroom in iblock
We never embedd the bio into a structure, so there is no need to allocate
64 bytes of headroom per bio.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-01-18 08:28:02 +00:00
Roland Dreier 895f302252 target: Set additional sense length field in sense data
The target code was not setting the additional sense length field in the
sense data it returned, which meant that at least the Linux stack
ignored the ASC/ASCQ fields.  For example, without this patch, on a
tcm_loop device:

    # sg_raw -v /dev/sda 2 0 0 0 0 0

gives

        cdb to send: 02 00 00 00 00 00
    SCSI Status: Check Condition

    Sense Information:
     Fixed format, current;  Sense key: Illegal Request
      Raw sense data (in hex):
            70 00 05 00 00 00 00 00

while after the patch we correctly get the following (which matches what
a regular disk returns):

        cdb to send: 02 00 00 00 00 00
    SCSI Status: Check Condition

    Sense Information:
     Fixed format, current;  Sense key: Illegal Request
     Additional sense: Invalid command operation code
     Raw sense data (in hex):
            70 00 05 00 00 00 00 0a  00 00 00 00 20 00 00 00
            00 00

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-16 06:29:04 +00:00
Nicholas Bellinger 6d5b597560 target: Remove legacy device status check from transport_execute_tasks
This patch removes a legacy se_dev_check_online() check from within
transport_execute_tasks() that should no longer be necessary as
transport_lookup_cmd_lun() is already making this call.

Using transport_cmd_check_stop() from transport_execute_tasks() should
already be checking per se_cmd context for each descriptor upon active
I/O shutdown, so no need to acquire dev->dev_status_lock again while
executing se_task submission.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:53:29 +00:00
Nicholas Bellinger beb55a0cc1 target: Remove __transport_execute_tasks() for each processing context
This patch removes the original usage of __transport_execute_tasks() ahead
of every transport_get_cmd_from_queue() call in transport_processing_thread().
This helps reduce se_device->execute_task_lock contention between qla2xxx wq
with target_submit_cmd() for READs and transport_processing_thread()
context servicing WRITEs with full payloads for I/O submission.

It also adds a __transport_execute_tasks() to kick the task queue again
without a *se_cmd descriptor with existing queue full logic, but this may
end up not being necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:50:12 +00:00
Nicholas Bellinger 4d2300ccff target: Remove extra se_device->execute_task_lock access in fast path
This patch makes __transport_execute_tasks() perform the addition of
tasks to dev->execute_task_list via __transport_add_tasks_from_cmd()
while holding dev->execute_task_lock during normal I/O fast path
submission.

It effectively removes the unnecessary re-acquire of dev->execute_task_lock
during transport_execute_tasks() -> transport_add_tasks_from_cmd() ahead
of calling  __transport_execute_tasks() to queue tasks for the passed
*se_cmd descriptor.

(v2: Re-add goto check_depth usage for multi-task submission for now..)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:48:46 +00:00
Nicholas Bellinger 65586d51e0 target: Drop se_device TCQ queue_depth usage from I/O path
Historically, pSCSI devices have been the ones that required target-core
to enforce a per se_device->depth_left.  This patch changes target-core
to no longer (by default) enforce a per se_device->depth_left or sleep in
transport_tcq_window_closed() when we out of queue slots for all backend
export cases.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:42:13 +00:00
Nicholas Bellinger 40be67f4c5 target: Fix possible NULL pointer with __transport_execute_tasks
This patch makes __transport_execute_tasks() use a local *se_dev
reference to prevent direct se_cmd->se_dev access after
transport_cmd_check_stop() -> transport_add_tasks_from_cmd()
has been called, as in the current implementation we can expect
__transport_execute_tasks() may be called from another context
that may have already completed the I/O.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:42:12 +00:00
Nicholas Bellinger 4355a9110e tcm_fc: Convert ft_send_work to use target_submit_cmd
This patch converts the main ft_send_work() I/O path to use
target_submit_cmd() with a single se_cmd->cmd_kref reference
that is released via the existing ft_check_stop_free() response
path callback.

It also makes ft_send_tm() use transport_init_se_cmd() and
target_get_sess_cmd() to also use single se_cmd->cmd_kref
reference.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:42:08 +00:00
Nicholas Bellinger a636078552 target: Add target_submit_cmd() for process context fabric submission
This patch adds a target_submit_cmd() caller that can be used by fabrics
to submit an uninitialized se_cmd descriptor to an struct se_session +
unpacked_lun from workqueue process context.  This call will invoke the
following steps:

- transport_init_se_cmd() to setup se_cmd specific pointers
- Obtain se_cmd->cmd_kref references with target_get_sess_cmd()
- set se_cmd->t_tasks_bidi
- transport_lookup_cmd_lun() to setup struct se_cmd->se_lun from
  the passed unpacked_lun
- transport_generic_allocate_tasks() to setup the passed *cdb, and
- transport_handle_cdb_direct() handle READ dispatch or WRITE
  ready-to-transfer callback to fabric

v2 changes from hch feedback:

*) Add target_sc_flags_table for target_submit_cmd flags
*) Rename bidi parameter to flags, add TARGET_SCF_BIDI_OP
*) Convert checks to BUG_ON
*) Add out_check_cond for transport_send_check_condition_and_sense
   usage

v3 changes:

*) Add TARGET_SCF_ACK_KREF for target_submit_cmd into
   target_get_sess_cmd to determine when the fabric caller is expecting
   a second kref_put() from fabric packet acknowledgement.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:40:56 +00:00
Nicholas Bellinger 7481deb413 target: Make target_put_sess_cmd use target_release_cmd_kref
This patch moves target_put_sess_cmd() to use a se_cmd->cmd_kref
callback target_release_cmd_kref when performing driver release of
fabric->se_cmd descriptor memory.  It sets the default cmd_kref
count value to '2' within target_get_sess_cmd() setup, and
currently assumes TFO->check_stop_free() usage.

It drops se_tfo->check_release_cmd() usage in the main
transport_release_cmd codepath.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:38:29 +00:00
Roland Dreier ce136176fe target: Set response format in INQUIRY response
Current SCSI specs say that the "response format" field in the standard
INQUIRY response should be set to 2, and all the real SCSI devices I
have do put 2 here.  So let's do that too.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:38:28 +00:00
Christoph Hellwig 2e88efd3aa tcm_loop: bump max_sectors
There is not reason to artifically limit max_sectors in tcm_loop, set
it to UINT_MAX to allow stressing the large I/O handling in the target
core using the loopback driver.  Also remove various superflous defines
hiding the values set in the host template.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:28:11 +00:00
Sebastian Andrzej Siewior 0877eafd16 target/configs: remove trailing newline from udev_path and alias
This patch strips the trailing newline from backend device udev_path and
alias attributes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:28:10 +00:00
Nicholas Bellinger bc704fb58f iscsi-target: fix chap identifier simple_strtoul usage
This patch makes chap_server_compute_md5() use proper unsigned long
usage for the CHAP_I (identifier) and check for values beyond 255 as
per RFC-1994.

Reported-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:28:09 +00:00
Jörn Engel 8359cf43b9 target: remove useless casts
A reader should spend an extra moment whenever noticing a cast,
because either something special is going on that deserves extra
attention or, as is all too often the case, the code is wrong.

These casts, afaics, have all been useless.  They cast a foo* to a
foo*, cast a void* to the assigned type, cast a foo* to void*, before
assigning it to a void* variable, etc.

In a few cases I also removed an additional &...[0], which is equally
useless.

Lastly I added three FIXMEs where, to the best of my judgement, the
code appears to have a bug.  It would be good if someone could check
these.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:28:07 +00:00
Jörn Engel feae85644f target: simplify target_check_cdb_and_preempt
- rename to target_check_cdb_and_preempt
- use non-safe list_for_each_entry
- move common check into callee (simplifying callers)

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:27:55 +00:00
Jörn Engel c165f69c2c target: Move core_scsi3_check_cdb_abort_and_preempt
And make it static afterwards.

Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:27:34 +00:00
Sebastian Andrzej Siewior 90c161b643 target: use \n as a separator for configuration
The command
| echo rd_pages=32768 > ramdisk/control

Does not work because it writes "rd_pages=32768\n" and the parser which
matches for "rd_pages=%d" does not recognize it due to the \n. One way
of fixing this would be using "echo -n" instead.
This patch adds \n to the list of separators so we don't have to use the
-n argument which I find is more convinient.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:27:23 +00:00
Christoph Hellwig 1880807adb target: make the se_task task_state_active a normal bool
There is no need to make task_state_active an atomic_t given that it is
always set under the execute_task_lock so we can make it a simple bool.
Also rename it to t_state_active to be closer to the list it guards,
and make sure all checks before the list addion/removal actually happen
under execute_task_lock.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:27:02 +00:00
Christoph Hellwig 41e16e9816 target: remove the se_task task_error_status field
We only reach transport_complete_task once per task, so the test and set on
task_error_status is never going to have an effect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:26:44 +00:00
Christoph Hellwig ef804a849f target: fold se_task.task_sense into task_flags
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:26:27 +00:00
Christoph Hellwig c4795fb20e target: header reshuffle, part2
This reorganized the headers under include/target into:

 - target_core_base.h stays as is with all target-wide data stuctures and defines
 - target_core_backend.h contains the whole interface to I/O backends
 - target_core_fabric.h contains the whole interface to fabric modules

Except for those only the various configfs macro headers stay around.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 11:26:05 +00:00
Christoph Hellwig e26d99aed4 target: reshuffle headers
Create a new headers, drivers/target/target_core_internal.h that is supposed
to hold all target_core-internal prototypes.  Move all non-exported includes
from include/target to it, and merge the smaller prototype-only includes
inside drivers/target into it as well.  Mark functions that were found to
not be called outside their implementation file static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-14 08:51:12 +00:00
Nicholas Bellinger ddca8f3ed3 iscsi-target: Fix hex2bin warn_unused compile message
Fix the following compile warning with hex2bin() usage:

drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’:
drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:59 +00:00
Andy Grover c638830d04 target: Don't return an error if disabling unsupported features
If an attribute is present (but not yet supported) it should be OK
to write 0 (a no-op) to the attribute.

This is an issue because userspace should be able to save and restore all
set attribute values without error.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:58 +00:00
Sebastian Andrzej Siewior 65b0c78d5a target/rd: fix or rewrite the copy routine
So the code assumes that the sg list is only a array while in reality
loopback SGL memory via scsi_cmnd into target-core may be already
chained.  This patch converts ramdisk code to use sg_miter logic from
scatterlist.h in order to properly support passthrough SGL usage with
transport_generic_map_mem_to_cmd() via loopback.

With this patch the bug goes away. However after umount/mount of the
device my files are gone. So something is still not right. After looking
at it for a while I decided to rewrite the that part of the code and now
things do work for me.

For reference:
- http://article.gmane.org/gmane.linux.scsi.target.devel/595
  the sg_next() conversion
- http://article.gmane.org/gmane.linux.scsi.target.devel/602
  the rewrite of the copy code

(nab: Fix compile warning in rd_MEMCPY)

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:58 +00:00
Sebastian Andrzej Siewior 5bff9e8584 target/rd: simplify the page/offset computation
Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during
rd_request->rd_page assignment.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-12-06 06:00:57 +00:00