Commit Graph

22 Commits

Author SHA1 Message Date
David Teigland fad59c1390 [DLM] don't require FS flag on all nodes
Mask off the recently added DLM_LSFL_FS flag when setting the exflags.
This way all the nodes in the lockspace aren't required to have the FS
flag set, since we later check that exflags matches among all nodes.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:38 +01:00
Patrick Caulfield 44f487a553 [DLM] variable allocation
Add a new flag, DLM_LSFL_FS, to be used when a file system creates a lockspace.
This flag causes the dlm to use GFP_NOFS for allocations instead of GFP_KERNEL.
(This updated version of the patch uses gfp_t for ls_allocation.)

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-Off-By: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:23:17 +01:00
David Teigland 8b0e7b2cf3 [DLM] wait for config check during join [6/6]
Joining the lockspace should wait for the initial round of inter-node
config checks to complete before returning.  This way, if there's a
configuration mismatch between the joining node and the existing nodes,
the join can fail and return an error to the application.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:42 +01:00
David Teigland 79d72b5448 [DLM] fix new_lockspace error exit [5/6]
Fix the error path when exiting new_lockspace().  It was kfree'ing the
lockspace struct at the end, but that's only valid if it exits before
kobject_register occured.  After kobject_register we have to let the
kobject do the freeing.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:40 +01:00
David Teigland 3ae1acf93a [DLM] add lock timeouts and warnings [2/6]
New features: lock timeouts and time warnings.  If the DLM_LKF_TIMEOUT
flag is set, then the request/conversion will be canceled after waiting
the specified number of centiseconds (specified per lock).  This feature
is only available for locks requested through libdlm (can be enabled for
kernel dlm users if there's a use for it.)

If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then
a warning message will be sent to userspace (using genetlink) after a
request/conversion has been waiting for a given number of centiseconds
(configurable per node).  The time warnings will be used in the future
to do deadlock detection in userspace.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:33 +01:00
David Teigland 85e86edf95 [DLM] block scand during recovery [1/6]
Don't let dlm_scand run during recovery since it may try to do a resource
directory removal while the directory nodes are changing.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:31 +01:00
Linus Torvalds 5cefcab3db Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (34 commits)
  [GFS2] Uncomment sprintf_symbol calling code
  [DLM] lowcomms style
  [GFS2] printk warning fixes
  [GFS2] Patch to fix mmap of stuffed files
  [GFS2] use lib/parser for parsing mount options
  [DLM] Lowcomms nodeid range & initialisation fixes
  [DLM] Fix dlm_lowcoms_stop hang
  [DLM] fix mode munging
  [GFS2] lockdump improvements
  [GFS2] Patch to detect corrupt number of dir entries in leaf and/or inode blocks
  [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
  [DLM] fs/dlm/ast.c should #include "ast.h"
  [DLM] Consolidate transport protocols
  [DLM] Remove redundant assignment
  [GFS2] Fix bz 234168 (ignoring rgrp flags)
  [DLM] change lkid format
  [DLM] interface for purge (2/2)
  [DLM] add orphan purging code (1/2)
  [DLM] split create_message function
  [GFS2] Set drop_count to 0 (off) by default
  ...
2007-05-07 12:26:27 -07:00
Greg Kroah-Hartman 823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
David Teigland ef0c2bb05f [DLM] overlapping cancel and unlock
Full cancel and force-unlock support.  In the past, cancel and force-unlock
wouldn't work if there was another operation in progress on the lock.  Now,
both cancel and unlock-force can overlap an operation on a lock, meaning there
may be 2 or 3 operations in progress on a lock in parallel.  This support is
important not only because cancel and force-unlock are explicit operations
that an app can use, but both are used implicitly when a process exits while
holding locks.

Summary of changes:

- add-to and remove-from waiters functions were rewritten to handle situations
  with more than one remote operation outstanding on a lock

- validate_unlock_args detects when an overlapping cancel/unlock-force
  can be sent and when it needs to be delayed until a request/lookup
  reply is received

- processing request/lookup replies detects when cancel/unlock-force
  occured during the op, and carries out the delayed cancel/unlock-force

- manipulation of the "waiters" (remote operation) state of a lock moved under
  the standard rsb mutex that protects all the other lock state

- the two recovery routines related to locks on the waiters list changed
  according to the way lkb's are now locked before accessing waiters state

- waiters recovery detects when lkb's being recovered have overlapping
  cancel/unlock-force, and may not recover such locks

- revert_lock (cancel) returns a value to distinguish cases where it did
  nothing vs cases where it actually did a cancel; the cancel completion ast
  should only be done when cancel did something

- orphaned locks put on new list so they can be found later for purging

- cancel must be called on a lock when making it an orphan

- flag user locks (ENDOFLIFE) at the end of their useful life (to the
  application) so we can return an error for any further cancel/unlock-force

- we weren't setting COMP/BAST ast flags if one was already set, so we'd lose
  either a completion or blocking ast

- clear an unread bast on a lock that's become unlocked

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:00 +01:00
David Teigland 68c817a1c4 [DLM] rename dlm_config_info fields
Add a "ci_" prefix to the fields in the dlm_config_info struct so that we
can use macros to add configfs functions to access them (in a later
patch).  No functional changes in this patch, just naming changes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:37 -05:00
David Teigland 98f176fb32 [DLM] don't accept replies to old recovery messages
We often abort a recovery after sending a status request to a remote node.
We want to ignore any potential status reply we get from the remote node.
If we get one of these unwanted replies, we've often moved on to the next
recovery message and incremented the message sequence counter, so the
reply will be ignored due to the seq number.  In some cases, we've not
moved on to the next message so the seq number of the reply we want to
ignore is still correct, causing the reply to be accepted.  The next
recovery message will then mistake this old reply as a new one.

To fix this, we add the flag RCOM_WAIT to indicate when we can accept a
new reply.  We clear this flag if we abort recovery while waiting for a
reply.  Before the flag is set again (to allow new replies) we know that
any old replies will be rejected due to their sequence number.  We also
initialize the recovery-message sequence number to a random value when a
lockspace is first created.  This makes it clear when messages are being
rejected from an old instance of a lockspace that has since been
recreated.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:14 -05:00
David Teigland 2896ee37cc [DLM] fix add_requestqueue checking nodes list
Requests that arrive after recovery has started are saved in the
requestqueue and processed after recovery is done.  Some of these requests
are purged during recovery if they are from nodes that have been removed.
We move the purging of the requests (dlm_purge_requestqueue) to later in
the recovery sequence which allows the routine saving requests
(dlm_add_requestqueue) to avoid filtering out requests by nodeid since the
same will be done by the purge.  The current code has add_requestqueue
filtering by nodeid but doesn't hold any locks when accessing the list of
current nodes.  This also means that we need to call the purge routine
when the lockspace is being shut down since the add routine will not be
rejecting requests itself any more.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:00 -05:00
Patrick Caulfield e2de7f5655 [DLM] fix oops in kref_put when removing a lockspace
Now that the lockspace struct is freed when the last sysfs object is released
this patch prevents use of that lockspace by sysfs. We attempt to re-get the
lockspace from the lockspace list and fail the request if it has been removed.

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-06 09:28:01 -05:00
Patrick Caulfield ba542e3b92 [DLM] Fix kref_put oops
This patch fixes the recounting on the lockspace kobject. Previously the lockspace was freed while userspace could have had a
reference to one of its sysfs files, causing an oops in kref_put.

Now the lockspace kfree is moved into the kobject release() function

Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-06 09:01:07 -05:00
David Teigland a1d144c71d [DLM] use snprintf in sysfs show
Use snprintf(buf, PAGE_SIZE, ...) instead of sprintf in sysfs show
methods.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 09:44:01 -04:00
David Teigland 5f88f1ea16 [DLM] add new lockspace to list ealier
When a new lockspace was being created, the recoverd thread was being
started for it before the lockspace was added to the global list of
lockspaces.  The new thread was looking up the lockspace in the global
list and sometimes not finding it due to the race with the original thread
adding it to the list.  We need to add the lockspace to the global list
before starting the thread instead of after, and if the new thread can't
find the lockspace for some reason, it should return an error.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-25 10:02:53 -04:00
David Teigland faa0f26772 [DLM] show nodeid for recovery message
To aid debugging, it's useful to be able to see what nodeid the dlm is
waiting on for a message reply.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-09 09:46:38 -04:00
David Teigland 5de6319b18 [DLM] more info through debugfs
Display more information from debugfs, particularly locks waiting for
a master lookup or operations waiting for a remote reply.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-26 08:41:37 -04:00
David Teigland 597d0cae0f [DLM] dlm: user locks
This changes the way the dlm handles user locks.  The core dlm is now
aware of user locks so they can be dealt with more efficiently.  There is
no more dlm_device module which previously managed its own duplicate copy
of every user lock.

Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-07-13 09:25:34 -04:00
David Teigland c56b39cd2c [DLM] PATCH 3/3 dlm: show recover state
Expose the current recovery state in sysfs to help in debugging.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-04-28 10:51:53 -04:00
David Teigland 901359256b [DLM] Update DLM to the latest patch level
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-20 08:47:07 +00:00
David Teigland e7fd41792f [DLM] The core of the DLM for GFS2/CLVM
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.

It implements VAX-style locking modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18 09:30:29 +00:00