Commit Graph

18 Commits

Author SHA1 Message Date
Willy WOLFF 0d76d6e1ee thermal: fix source code documentation for parameters
Some parameters are not documented, or not present at all, in thermal
governors code.

Signed-off-by: Willy Wolff <willy.mh.wolff@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-06-29 10:46:31 +08:00
Michele Di Giorgio d0b7306d20 thermal: fix race condition when updating cooling device
When multiple thermal zones are bound to the same cooling device, multiple
kernel threads may want to update the cooling device state by calling
thermal_cdev_update(). Having cdev not protected by a mutex can lead to a race
condition. Consider the following situation with two kernel threads k1 and k2:

	    Thread k1				Thread k2
                                    ||
                                    ||  call thermal_cdev_update()
                                    ||      ...
                                    ||      set_cur_state(cdev, target);
    call power_actor_set_power()    ||
        ...                         ||
        instance->target = state;   ||
        cdev->updated = false;      ||
                                    ||      cdev->updated = true;
                                    ||      // completes execution
    call thermal_cdev_update()      ||
        // cdev->updated == true    ||
        return;                     ||
                                    \/
                                    time

k2 has already looped through the thermal instances looking for the deepest
cooling device state and is preempted right before setting cdev->updated to
true. Now, k1 runs, modifies the thermal instance state and sets cdev->updated
to false. Then, k1 is preempted and k2 continues the execution by setting
cdev->updated to true, therefore preventing k1 from performing the update.
Notice that this is not an issue if k2 looks at the instance->target modified by
k1 "after" it is assigned by k1. In fact, in this case the update will happen
anyway and k1 can safely return immediately from thermal_cdev_update().

This may lead to a situation where a thermal governor never updates the cooling
device. For example, this is the case for the step_wise governor: when calling
the function thermal_zone_trip_update(), the governor may always get a new state
equal to the old one (which, however, wasn't notified to the cooling device) and
will therefore skip the update.

CC: Zhang Rui <rui.zhang@intel.com>
CC: Eduardo Valentin <edubezval@gmail.com>
CC: Peter Feuerer <peter@piie.net>
Reported-by: Toby Huang <toby.huang@arm.com>
Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-08-08 10:57:39 +08:00
Zhang Rui bb431ba26c Thermal: initialize thermal zone device correctly
After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().

Both thermal core framework and step_wise governor is
enhanced to handle this. And since the step_wise governor
is the only one that uses trends, so it's the only thermal
governor that needs to be updated.

CC: <stable@vger.kernel.org> #3.18+
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: szegad <szegadlo@poczta.onet.pl>
Tested-by: prash <prash.n.rao@gmail.com>
Tested-by: amish <ammdispose-arch@yahoo.com>
Tested-by: Matthias <morpheusxyz123@yahoo.de>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-29 15:59:44 +08:00
Sascha Hauer 17e8351a77 thermal: consistently use int for temperatures
The thermal code uses int, long and unsigned long for temperatures
in different places.

Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.

'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.

Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-03 23:15:50 +08:00
Brian Norris 56b613ea0d thermal: step_wise: spelling fixes
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-02-06 16:35:00 +08:00
Zhang Rui 9ceaa81efd Merge branch 'thermal-core-fix' of .git into next 2014-10-11 09:28:13 +08:00
Lukasz Majewski 26bb0e9a1a thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
It turns out that some boards can have instance->lower greater than 0 and
when thermal trend is dropping it results with next_target equal to -1.

Since the next_target is defined as unsigned long it is interpreted as
0xFFFFFFFF and larger than instance->upper.
As a result the next_target is set to instance->upper which ramps up to
maximal cooling device target when the temperature is steadily decreasing.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-10-09 10:44:01 +08:00
Punit Agrawal 208cd822a1 thermal: trace: Trace when temperature is above a trip point
Create a new event to trace when the temperature is above a trip
point. Use the trace-point when handling non-critical and critical
trip pionts.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-07-29 09:28:43 -04:00
Aaron Lu 06475b556c thermal: debug: add debug statement for core and step_wise
To ease debugging thermal problem, add these dynamic debug statements
so that user do not need rebuild kernel to see these info.

Based on a patch from Zhang Rui for debugging on bugzilla:
https://bugzilla.kernel.org/attachment.cgi?id=98671

A sample output after we turn on dynamic debug with the following cmd:
# echo 'module thermal_sys +fp' > /sys/kernel/debug/dynamic_debug/control
is like:

[  355.147627] update_temperature: thermal thermal_zone0: last_temperature=52000, current_temperature=55000
[  355.147636] thermal_zone_trip_update: thermal thermal_zone0: Trip1[type=1,temp=79000]:trend=2,throttle=0
[  355.147644] get_target_state: thermal cooling_device8: cur_state=0
[  355.147647] thermal_zone_trip_update: thermal cooling_device8: old_target=-1, target=-1
[  355.147652] get_target_state: thermal cooling_device7: cur_state=0
[  355.147655] thermal_zone_trip_update: thermal cooling_device7: old_target=-1, target=-1
[  355.147660] get_target_state: thermal cooling_device6: cur_state=0
[  355.147663] thermal_zone_trip_update: thermal cooling_device6: old_target=-1, target=-1
[  355.147668] get_target_state: thermal cooling_device5: cur_state=0
[  355.147671] thermal_zone_trip_update: thermal cooling_device5: old_target=-1, target=-1
[  355.147678] thermal_zone_trip_update: thermal thermal_zone0: Trip2[type=0,temp=90000]:trend=1,throttle=0
[  355.147776] get_target_state: thermal cooling_device0: cur_state=0
[  355.147783] thermal_zone_trip_update: thermal cooling_device0: old_target=-1, target=-1
[  355.147792] thermal_zone_trip_update: thermal thermal_zone0: Trip3[type=0,temp=80000]:trend=1,throttle=0
[  355.147845] get_target_state: thermal cooling_device1: cur_state=0
[  355.147849] thermal_zone_trip_update: thermal cooling_device1: old_target=-1, target=-1
[  355.147856] thermal_zone_trip_update: thermal thermal_zone0: Trip4[type=0,temp=70000]:trend=1,throttle=0
[  355.147904] get_target_state: thermal cooling_device2: cur_state=0
[  355.147908] thermal_zone_trip_update: thermal cooling_device2: old_target=-1, target=-1
[  355.147915] thermal_zone_trip_update: thermal thermal_zone0: Trip5[type=0,temp=60000]:trend=1,throttle=0
[  355.147963] get_target_state: thermal cooling_device3: cur_state=0
[  355.147967] thermal_zone_trip_update: thermal cooling_device3: old_target=-1, target=-1
[  355.147973] thermal_zone_trip_update: thermal thermal_zone0: Trip6[type=0,temp=55000]:trend=1,throttle=1
[  355.148022] get_target_state: thermal cooling_device4: cur_state=0
[  355.148025] thermal_zone_trip_update: thermal cooling_device4: old_target=-1, target=1
[  355.148036] thermal_cdev_update: thermal cooling_device4: zone0->target=1
[  355.169279] thermal_cdev_update: thermal cooling_device4: set to state 1

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-02 10:52:48 +08:00
Eduardo Valentin ca56caa021 thermal: step_wise: return instance->target by default
In case the trend is not changing or when there is no
request for throttling, it is expected that the instance
would not change its requested target. This patch improves
the code implementation to cover for this expected behavior.

With current implementation, the instance will always
reset to cdev.cur_state, even in not expected cases,
like those mentioned above.

This patch changes the step_wise governor implementation
of get_target so that we accomplish:
(a) - default value will be current instance->target, so
we do not change the thermal instance target unnecessarily.
(b) - the code now it is clear about what is the intention.
There is a clear statement of what are the expected outcomes
(c) - removal of hardcoded constants, now it is put in use
the THERMAL_NO_TARGET macro.
(d) - variable names are also improved so that reader can
clearly understand the difference between instance cur target,
next target and cdev cur_state.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reported-by: Ruslan Ruslichenko <ruslan.ruslichenko@ti.com>
Signed-of-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15 15:49:20 +08:00
Shawn Guo 178c2490b9 thermal: step_wise: cdev only needs update on a new target state
The cooling device only needs update on a new target state.  Since we
already check old target in thermal_zone_trip_update(), we can do one
more check to see if it's a new target state.  If not, we can reasonably
save some uncecesary code execution.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15 15:48:59 +08:00
Zhang Rui 80a26a5c22 Thermal: build thermal governors into thermal_sys module
The thermal governors are part of the thermal framework,
rather than a seperate feature/module.
Because the generic thermal layer can not work without
thermal governors, and it must load the thermal governors
during its initialization.

Build them into one module in this patch.

This also fix a problem that the generic thermal layer does not
work when CONFIG_THERMAL=m and CONFIG_THERMAL_GOV_XXX=y.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
2013-04-14 23:28:43 +08:00
Andrew Bresticker e79fe642cc thermal: step_wise: set throttle target within thermal instance limits
When selecting a target cooling state in get_target_state(), make sure
that the state is at least as high as the minimum when the temperature
is rising and at least as low as the maximum when the temperature is
falling.  This is necessary because, in the THREAML_TREND_RAISING and
THERMAL_TREND_DROPPING cases, the current state may only be incremented
or decremented by one even if it is outside the bounds of the thermal
instance.  This might occur, for example, if the CPU is heating up
and hits a thermal trip point for the first time when it's frequency
is much higher than the range specified by the thermal instance
corresponding to the trip point.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-04-12 07:23:50 +08:00
Zhang Rui b8bb6cb999 step_wise: Unify the code for both throttle and dethrottle
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-01-04 15:22:37 +08:00
Zhang Rui 3dbfff3dfe Introduce THERMAL_TREND_RAISE/DROP_FULL support for step_wise governor
step_wise governor should set the device cooling state to
upper/lower limit directly when THERMAL_TREND_RAISE/DROP_FULL.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-01-04 15:22:37 +08:00
Zhang Rui 1f53ef17d3 Thermal: Fix DEFAULT_THERMAL_GOVERNOR
Fix DEFAULT_THERMAL_GOVERNOR to be consistant with the
default governor selected in kernel config file.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-12-12 15:34:48 +08:00
Sachin Kamat b88a497701 thermal: step_wise: Add missing static storage class specifiers
Fixes the following sparse warnings:
drivers/thermal/step_wise.c:153:5: warning:
symbol 'step_wise_throttle' was not declared. Should it be static?
drivers/thermal/step_wise.c:172:25: warning:
symbol 'thermal_gov_step_wise' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-05 14:00:10 +08:00
Durgadoss R e151a202a0 Thermal: Introduce a step_wise thermal governor
This patch adds a simple step_wise governor to the
generic thermal layer. This algorithm throttles the
cooling devices in a linear fashion. If the 'trend'
is heating, it throttles by one step. And if the
thermal trend is cooling it de-throttles by one step.

This actually moves the throttling logic from thermal_sys.c
and puts inside step_wise.c, without any change.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-11-05 14:00:07 +08:00