Commit Graph

3821 Commits

Author SHA1 Message Date
Shu Wang d6f5f071f1 xhci: fix memleak in xhci_run()
Found this issue by kmemleak.
xhci_run() did not check return val and free command for
xhci_queue_vendor_command()

unreferenced object 0xffff88011c0be500 (size 64):
  comm "kworker/0:1", pid 58, jiffies 4294670908 (age 50.420s)
  hex dump (first 32 bytes):
  backtrace:
    [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0
    [<ffffffff81576bf4>] xhci_alloc_command+0x44/0x130
    [<ffffffff8156f1cc>] xhci_run+0x4cc/0x630
    [<ffffffff8153b84b>] usb_add_hcd+0x3bb/0x950
    [<ffffffff8154eac8>] usb_hcd_pci_probe+0x188/0x500
    [<ffffffff815851ac>] xhci_pci_probe+0x2c/0x220
    [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0
    [<ffffffff810a54e4>] work_for_cpu_fn+0x14/0x20
    [<ffffffff810a8409>] process_one_work+0x149/0x360
    [<ffffffff810a8d08>] worker_thread+0x1d8/0x3c0
    [<ffffffff810ae7d9>] kthread+0x109/0x140
    [<ffffffff8176d585>] ret_from_fork+0x25/0x30
    [<ffffffffffffffff>] 0xffffffffffffffff

Cc: <stable@vger.kernel.org>
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:36 +02:00
Peter Chen 576d55460e usb: xhci: fix spinlock recursion for USB2 test mode
Both xhci_hub_control and xhci_disable_slot tries to hold spinlock, the
spinlock recursion occurs when enters USB2 test mode. Fix it by unlock
spinlock before calling xhci_disable_slot.

Cc: <stable@vger.kernel.org>
Fixes: 0f1d832ed1 ("usb: xhci: Add port test modes support for usb2")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:36 +02:00
Mathias Nyman a54408d0a0 xhci: fix 20000ms port resume timeout
A uncleared PLC (port link change) bit will prevent furuther port event
interrupts for that port. Leaving it uncleared caused get_port_status()
to timeout after 20000ms while waiting to get the final port event
interrupt for resume -> U0 state change.

This is a targeted fix for a specific case where we get a port resume event
racing with xhci resume. The port event interrupt handler notices xHC is
not yet running and bails out early, leaving PLC uncleared.

The whole xhci port resuming needs more attention, but while working on it
it anyways makes sense to always ensure PLC is cleared in get_port_status
before setting a new link state and waiting for its completion.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:36 +02:00
Shyam Sundar S K 28a2369f7d usb: xhci: Issue stop EP command only when the EP state is running
on AMD platforms with SNPS 3.1 USB controller if stop endpoint command is
issued the controller does not respond, when the EP is not in running
state. HW completes the command execution and reports
"Context State Error" completion code. This is as per the spec. However
HW on receiving the second command additionally marks EP to Flow control
state in HW which is RTL bug. This bug causes the HW not to respond
to any further doorbells that are rung by the driver. This makes the EP
to not functional anymore and causes gross functional failures.

As a workaround, not to hit this problem, it's better to check the EP state
and issue a stop EP command only when the EP is in running state.

As a sidenote, even with this patch there is still a possibility of
triggering the RTL bug if the context state races with the stop endpoint
command as described in xHCI spec 4.6.9

[code simplification and reworded sidenote in commit message -Mathias]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:35 +02:00
Jiahau Chang 9da5a1092b xhci: Bad Ethernet performance plugged in ASM1042A host
When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad
performance was manifesting in Web browser use (like download
large file such as ISO image). It is known limitation of
ASM1042A that is not compatible with driver scheduling,
As a workaround we can modify flow control handling of ASM1042A.
The register we modify is changes the behavior

[use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiahau Chang <Lars_chang@asmedia.com.tw>
Signed-off-by: Ian Pilcher <arequipeno@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:35 +02:00
Mathias Nyman 4b895868bb xhci: Fix NULL pointer dereference when cleaning up streams for removed host
This off by one in stream_id indexing caused NULL pointer dereference and
soft lockup on machines with USB attached SCSI devices connected to a
hotpluggable xhci controller.

The code that cleans up pending URBs for dead hosts tried to dereference
a stream ring at the invalid stream_id 0.
ep->stream_info->stream_rings[0] doesn't point to a ring.

Start looping stream_id from 1 like in all the other places in the driver,
and check that the ring exists before trying to kill URBs on it.

Reported-by: rocko r <rockorequin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-20 14:40:35 +02:00
Linus Torvalds 6481352082 USB fixes for 4.13-rc1
Here are some remaining USB fixes for 4.13-rc1.  They were originally
 scheduled for 4.12-final, but I didn't send them to you in time.
 Because of that, they were in a separate branch from the larger USB set
 of patches, so here they are in a separate pull request.
 
 Nothing major here a all, just 3 small patches:
 	- some usb-serial new device ids
 	- xhci bugfix for some crazy AMD hardware
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWV9FRg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylHxgCfTT31v4FaxH2k76qA1ZnHdXWHqyQAn3oyOE4T
 uJhpp1FbFR1VNXM/jRox
 =PCPm
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some remaining USB fixes for 4.13-rc1. They were originally
  scheduled for 4.12-final, but I didn't send them to you in time.
  Because of that, they were in a separate branch from the larger USB
  set of patches, so here they are in a separate pull request.

  Nothing major here a all, just three small patches:

   - some usb-serial new device ids
   - xhci bugfix for some crazy AMD hardware

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Limit USB2 port wake support for AMD Promontory hosts
  USB: serial: qcserial: new Sierra Wireless EM7305 device ID
  USB: serial: option: add two Longcheer device ids
2017-07-07 13:42:04 -07:00
Linus Torvalds 408c9861c6 Power management updates for v4.13-rc1
- Rework suspend-to-idle to allow it to take wakeup events signaled
    by the EC into account on ACPI-based platforms in order to properly
    support power button wakeup from suspend-to-idle on recent Dell
    laptops (Rafael Wysocki).
 
    That includes the core suspend-to-idle code rework, support for
    the Low Power S0 _DSM interface, and support for the ACPI INT0002
    Virtual GPIO device from Hans de Goede (required for USB keyboard
    wakeup from suspend-to-idle to work on some machines).
 
  - Stop trying to export the current CPU frequency via /proc/cpuinfo
    on x86 as that is inaccurate and confusing (Len Brown).
 
  - Rework the way in which the current CPU frequency is exported by
    the kernel (over the cpufreq sysfs interface) on x86 systems with
    the APERF and MPERF registers by always using values read from
    these registers, when available, to compute the current frequency
    regardless of which cpufreq driver is in use (Len Brown).
 
  - Rework the PCI/ACPI device wakeup infrastructure to remove the
    questionable and artificial distinction between "devices that
    can wake up the system from sleep states" and "devices that can
    generate wakeup signals in the working state" from it, which
    allows the code to be simplified quite a bit (Rafael Wysocki).
 
  - Fix the wakeup IRQ framework by making it use SRCU instead of
    RCU which doesn't allow sleeping in the read-side critical
    sections, but which in turn is expected to be allowed by the
    IRQ bus locking infrastructure (Thomas Gleixner).
 
  - Modify some computations in the intel_pstate driver to avoid
    rounding errors resulting from them (Srinivas Pandruvada).
 
  - Reduce the overhead of the intel_pstate driver in the HWP
    (hardware-managed P-states) mode and when the "performance"
    P-state selection algorithm is in use by making it avoid
    registering scheduler callbacks in those cases (Len Brown).
 
  - Rework the energy_performance_preference sysfs knob in
    intel_pstate by changing the values that correspond to
    different symbolic hint names used by it (Len Brown).
 
  - Make it possible to use more than one cpuidle driver at the same
    time on ARM (Daniel Lezcano).
 
  - Make it possible to prevent the cpuidle menu governor from using
    the 0 state by disabling it via sysfs (Nicholas Piggin).
 
  - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1
    on AMD systems (Yazen Ghannam).
 
  - Make the CPPC cpufreq driver take the lowest nonlinear performance
    information into account (Prashanth Prakash).
 
  - Add support for hi3660 to the cpufreq-dt driver, fix the
    imx6q driver and clean up the sfi, exynos5440 and intel_pstate
    drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila,
    Rafael Wysocki, Tao Wang).
 
  - Fix a few minor issues in the generic power domains (genpd)
    framework and clean it up somewhat (Krzysztof Kozlowski,
    Mikko Perttunen, Viresh Kumar).
 
  - Fix a couple of minor issues in the operating performance points
    (OPP) framework and clean it up somewhat (Viresh Kumar).
 
  - Fix a CONFIG dependency in the hibernation core and clean it up
    slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
 
  - Add rk3228 support to the rockchip-io adaptive voltage scaling
    (AVS) driver (David Wu).
 
  - Fix an incorrect bit shift operation in the RAPL power capping
    driver (Adam Lessnau).
 
  - Add support for the EPP field in the HWP (hardware managed
    P-states) control register, HWP.EPP, to the x86_energy_perf_policy
    tool and update msr-index.h with HWP.EPP values (Len Brown).
 
  - Fix some minor issues in the turbostat tool (Len Brown).
 
  - Add support for AMD family 0x17 CPUs to the cpupower tool and fix
    a minor issue in it (Sherry Hurwitz).
 
  - Assorted cleanups, mostly related to the constification of some
    data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
    Kozlowski).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZWrICAAoJEILEb/54YlRxZYMQAIRhfbyDxKq+ByvSilUS8kTA
 AItwJ8FFzykhiwN75Cqabg4rAGyWma7IRs1vzU7zeC1aEQIn+bTQtvk+utZNI+g2
 ANFlDha20q/sXsP/CDMMTIAdW9tSOC0TOvFI9s2V2Y8dJZhoekO4ctx34FAfUS5d
 Ao6rwSAWCMsCXcGaTAlqTA+TEJmBG7u6Iq6hq6ngltoFwOv3mWWBVn52VVaJ7SMp
 9/IPbbLGMFAedrgEBRGCR+MME1xZZpvcZIJaTt1Mgn7Cx3cJaysIUAvqY/SsvFGq
 5FcUTcF2qpK3+AGawiAxZIjvOBsGRtIwqKinNIzYWs/NjiIdzmgVAmTeuPtTqp+5
 HFehUdtkFcnuDnLqSNzAaZUa7tw84cJkwnbVMnesx0MkG6rZ1SeL22E2Sabpcdsh
 3Yo1ThzJSxi59DhiiE92EQnNCEjmCldRy+8q5Ag035muxl6EJYvuNBMnZv/BMCUn
 ltSNOrmps1DlN+Col8ORIeNzQ1YjYzWMqKAYzSbyccm4ug/iSHx0/DuESmQ4GTlF
 YCwkmqyWiHrBwpl51jc+4a7SGlMmKRqU+MJes0CjagaaqoUAb8qeBOpzEJ0yNwjZ
 wtI41l6blE6kbMD3yqGdCfiB2S7GlPVoxa15eX1wRyLH3fLjwwrzJirEaiBS86tI
 1PzHZEOmBlh3DYC6DBKA
 =Wsph
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The big ticket items here are the rework of suspend-to-idle in order
  to add proper support for power button wakeup from it on recent Dell
  laptops and the rework of interfaces exporting the current CPU
  frequency on x86.

  In addition to that, support for a few new pieces of hardware is
  added, the PCI/ACPI device wakeup infrastructure is simplified
  significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
  bus locking infrastructure.

  Also, there are some functional improvements for intel_pstate, tools
  updates and small fixes and cleanups all over.

  Specifics:

   - Rework suspend-to-idle to allow it to take wakeup events signaled
     by the EC into account on ACPI-based platforms in order to properly
     support power button wakeup from suspend-to-idle on recent Dell
     laptops (Rafael Wysocki).

     That includes the core suspend-to-idle code rework, support for the
     Low Power S0 _DSM interface, and support for the ACPI INT0002
     Virtual GPIO device from Hans de Goede (required for USB keyboard
     wakeup from suspend-to-idle to work on some machines).

   - Stop trying to export the current CPU frequency via /proc/cpuinfo
     on x86 as that is inaccurate and confusing (Len Brown).

   - Rework the way in which the current CPU frequency is exported by
     the kernel (over the cpufreq sysfs interface) on x86 systems with
     the APERF and MPERF registers by always using values read from
     these registers, when available, to compute the current frequency
     regardless of which cpufreq driver is in use (Len Brown).

   - Rework the PCI/ACPI device wakeup infrastructure to remove the
     questionable and artificial distinction between "devices that can
     wake up the system from sleep states" and "devices that can
     generate wakeup signals in the working state" from it, which allows
     the code to be simplified quite a bit (Rafael Wysocki).

   - Fix the wakeup IRQ framework by making it use SRCU instead of RCU
     which doesn't allow sleeping in the read-side critical sections,
     but which in turn is expected to be allowed by the IRQ bus locking
     infrastructure (Thomas Gleixner).

   - Modify some computations in the intel_pstate driver to avoid
     rounding errors resulting from them (Srinivas Pandruvada).

   - Reduce the overhead of the intel_pstate driver in the HWP
     (hardware-managed P-states) mode and when the "performance" P-state
     selection algorithm is in use by making it avoid registering
     scheduler callbacks in those cases (Len Brown).

   - Rework the energy_performance_preference sysfs knob in intel_pstate
     by changing the values that correspond to different symbolic hint
     names used by it (Len Brown).

   - Make it possible to use more than one cpuidle driver at the same
     time on ARM (Daniel Lezcano).

   - Make it possible to prevent the cpuidle menu governor from using
     the 0 state by disabling it via sysfs (Nicholas Piggin).

   - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
     AMD systems (Yazen Ghannam).

   - Make the CPPC cpufreq driver take the lowest nonlinear performance
     information into account (Prashanth Prakash).

   - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
     driver and clean up the sfi, exynos5440 and intel_pstate drivers
     (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
     Wysocki, Tao Wang).

   - Fix a few minor issues in the generic power domains (genpd)
     framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
     Perttunen, Viresh Kumar).

   - Fix a couple of minor issues in the operating performance points
     (OPP) framework and clean it up somewhat (Viresh Kumar).

   - Fix a CONFIG dependency in the hibernation core and clean it up
     slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).

   - Add rk3228 support to the rockchip-io adaptive voltage scaling
     (AVS) driver (David Wu).

   - Fix an incorrect bit shift operation in the RAPL power capping
     driver (Adam Lessnau).

   - Add support for the EPP field in the HWP (hardware managed
     P-states) control register, HWP.EPP, to the x86_energy_perf_policy
     tool and update msr-index.h with HWP.EPP values (Len Brown).

   - Fix some minor issues in the turbostat tool (Len Brown).

   - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
     minor issue in it (Sherry Hurwitz).

   - Assorted cleanups, mostly related to the constification of some
     data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
     Kozlowski)"

* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
  cpufreq: Update scaling_cur_freq documentation
  cpufreq: intel_pstate: Clean up after performance governor changes
  PM: hibernate: constify attribute_group structures.
  cpuidle: menu: allow state 0 to be disabled
  intel_idle: Use more common logging style
  PM / Domains: Fix missing default_power_down_ok comment
  PM / Domains: Fix unsafe iteration over modified list of domains
  PM / Domains: Fix unsafe iteration over modified list of domain providers
  PM / Domains: Fix unsafe iteration over modified list of device links
  PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
  PM / Domains: Call driver's noirq callbacks
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  PM / QoS: constify *_attribute_group.
  PM / AVS: rockchip-io: add io selectors and supplies for rk3228
  powercap/RAPL: prevent overridding bits outside of the mask
  PM / sysfs: Constify attribute groups
  ...
2017-07-04 13:39:41 -07:00
Linus Torvalds 362f6729cb USB/PHY patches for 4.13-rc1
Here is the big patchset of USB and PHY driver updates for 4.13-rc1.
 
 On the PHY side, they decided to move files around to "make things
 easier" in their tree.  Hopefully that wasn't a mistake, but in
 linux-next testing, we haven't had any reported problems.
 
 There's the usual set of gadget and xhci and musb updates in here as
 well, along with a number of smaller updates for a raft of different USB
 drivers.  Full details in the shortlog, nothing really major.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpavQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymJrgCgp8Pso8bs+bnIknUSQFSguWd3wM0AnA8X3NHf
 lrdCuqw+2oxGOQrecacz
 =5L4Q
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big patchset of USB and PHY driver updates for 4.13-rc1.

  On the PHY side, they decided to move files around to "make things
  easier" in their tree. Hopefully that wasn't a mistake, but in
  linux-next testing, we haven't had any reported problems.

  There's the usual set of gadget and xhci and musb updates in here as
  well, along with a number of smaller updates for a raft of different
  USB drivers. Full details in the shortlog, nothing really major.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits)
  Add USB quirk for HVR-950q to avoid intermittent device resets
  USB hub_probe: rework ugly goto-into-compound-statement
  usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
  USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
  usbip: Fix uninitialized variable bug in vhci
  usb: core: read USB ports from DT in the usbport LED trigger driver
  dt-bindings: leds: document new trigger-sources property
  usb: typec: ucsi: Add ACPI driver
  usb: typec: Add support for UCSI interface
  usb: musb: compress return logic into one line
  USB: serial: propagate late probe errors
  USB: serial: refactor port endpoint setup
  usb: musb: tusb6010_omap: Convert to DMAengine API
  ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  usb: musb: tusb6010_omap: Allocate DMA channels upfront
  usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  usb: musb: Add quirk to avoid skb reserve in gadget mode
  ...
2017-07-03 19:30:55 -07:00
Linus Torvalds 81e3e04489 UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
    the somewhat confusing uuid_be/uuid_le types and make the terminology
    fit the various specs, as well as the userspace libuuid library.
    (me, based on a previous version from Amir)
  - consolidated generic uuid/guid helper functions lifted from XFS
    and libnvdimm (Amir and me)
  - conversions to the new types and helpers (Amir, Andy and me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAllZfmILHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMvyg/9EvWHOOsSdeDykCK3KdH2uIqnxwpl+m7ljccaGJIc
 MmaH0KnsP9p/Cuw5hESh2tYlmCYN7pmYziNXpf/LRS65/HpEYbs4oMqo8UQsN0UM
 2IXHfXY0HnCoG5OixH8RNbFTkxuGphsTY8meaiDr6aAmqChDQI2yGgQLo3WM2/Qe
 R9N1KoBWH/bqY6dHv+urlFwtsREm2fBH+8ovVma3TO73uZCzJGLJBWy3anmZN+08
 uYfdbLSyRN0T8rqemVdzsZ2SrpHYkIsYGUZV43F581vp8e/3OKMoMxpWRRd9fEsa
 MXmoaHcLJoBsyVSFR9lcx3axKrhAgBPZljASbbA0h49JneWXrzghnKBQZG2SnEdA
 ktHQ2sE4Yb5TZSvvWEKMQa3kXhEfIbTwgvbHpcDr5BUZX8WvEw2Zq8e7+Mi4+KJw
 QkvFC1S96tRYO2bxdJX638uSesGUhSidb+hJ/edaOCB/GK+sLhUdDTJgwDpUGmyA
 xVXTF51ramRS2vhlbzN79x9g33igIoNnG4/PV0FPvpCTSqxkHmPc5mK6Vals1lqt
 cW6XfUjSQECq5nmTBtYDTbA/T+8HhBgSQnrrvmferjJzZUFGr/7MXl+Evz2x4CjX
 OBQoAMu241w6Vp3zoXqxzv+muZ/NLar52M/zbi9TUjE0GvvRNkHvgCC4NmpIlWYJ
 Sxg=
 =J/4P
 -----END PGP SIGNATURE-----

Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid

Pull uuid subsystem from Christoph Hellwig:
 "This is the new uuid subsystem, in which Amir, Andy and I have started
  consolidating our uuid/guid helpers and improving the types used for
  them. Note that various other subsystems have pulled in this tree, so
  I'd like it to go in early.

  UUID/GUID summary:

   - introduce the new uuid_t/guid_t types that are going to replace the
     somewhat confusing uuid_be/uuid_le types and make the terminology
     fit the various specs, as well as the userspace libuuid library.
     (me, based on a previous version from Amir)

   - consolidated generic uuid/guid helper functions lifted from XFS and
     libnvdimm (Amir and me)

   - conversions to the new types and helpers (Amir, Andy and me)"

* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
  ACPI: hns_dsaf_acpi_dsm_guid can be static
  mmc: sdhci-pci: make guid intel_dsm_guid static
  uuid: Take const on input of uuid_is_null() and guid_is_null()
  thermal: int340x_thermal: fix compile after the UUID API switch
  thermal: int340x_thermal: Switch to use new generic UUID API
  acpi: always include uuid.h
  ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
  ACPI / extlog: Switch to use new generic UUID API
  ACPI / bus: Switch to use new generic UUID API
  ACPI / APEI: Switch to use new generic UUID API
  acpi, nfit: Switch to use new generic UUID API
  MAINTAINERS: add uuid entry
  tmpfs: generate random sb->s_uuid
  scsi_debug: switch to uuid_t
  nvme: switch to uuid_t
  sysctl: switch to use uuid_t
  partitions/ldm: switch to use uuid_t
  overlayfs: use uuid_t instead of uuid_be
  fs: switch ->s_uuid to uuid_t
  ima/policy: switch to use uuid_t
  ...
2017-07-03 09:55:26 -07:00
Rafael J. Wysocki 8f8e5c3e27 Merge branch 'acpi-pm'
* acpi-pm:
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
  platform: x86: intel-hid: Wake up the system from suspend-to-idle
  platform: x86: intel-vbtn: Wake up the system from suspend-to-idle
  ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle
  platform/x86: Add driver for ACPI INT0002 Virtual GPIO device
  PCI / PM: Restore PME Enable if skipping wakeup setup
  PM / sleep: Print timing information if debug is enabled
  ACPI / PM: Clean up device wakeup enable/disable code
  ACPI / PM: Change log level of wakeup-related message
  USB / PCI / PM: Allow the PCI core to do the resume cleanup
  ACPI / PM: Run wakeup notify handlers synchronously

Conflicts:
	drivers/base/power/main.c
2017-07-03 14:23:09 +02:00
Rafael J. Wysocki 875aabf52e Merge branch 'uuid-types'
Merge 'uuid-types' from git://git.infradead.org/users/hch/uuid.git
2017-07-03 14:13:44 +02:00
Arvind Yadav af06d0094f usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29 14:49:06 +02:00
Rafael J. Wysocki de3ef1eb1c PM / core: Drop run_wake flag from struct dev_pm_info
The run_wake flag in struct dev_pm_info is used to indicate whether
or not the device is capable of generating remote wakeup signals at
run time (or in the system working state), but the distinction
between runtime remote wakeup and system wakeup signaling has always
been rather artificial.  The only practical reason for it to exist
at the core level was that ACPI and PCI treated those two cases
differently, but that's not the case any more after recent changes.

For this reason, get rid of the run_wake flag and, when applicable,
use device_set_wakeup_capable() and device_can_wakeup() instead of
device_set_run_wake() and device_run_wake(), respectively.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2017-06-28 01:52:52 +02:00
Jiahau Chang dec08194ff xhci: Limit USB2 port wake support for AMD Promontory hosts
For AMD Promontory xHCI host, although you can disable USB 2.0 ports in
BIOS settings, those ports will be enabled anyway after you remove a
device on that port and re-plug it in again. It's a known limitation of
the chip. As a workaround we can clear the PORT_WAKE_BITS.

This will disable wake on connect, disconnect and overcurrent on
AMD Promontory USB2 ports

[checkpatch cleanup and commit message reword -Mathias]
Cc: <stable@vger.kernel.org>
Cc: Tsai Nicholas <nicholas.tsai@amd.com>
Signed-off-by: Jiahau Chang <Lars_Chang@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20 11:18:20 +08:00
Greg Kroah-Hartman 571949a40a Merge 4.12-rc6 into usb-next
We want the USB fixes in here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20 10:16:07 +08:00
Mathias Nyman 3134bc9c52 xhci: cleanup finish_td() skip option
finish_td() could be called with a skip option to bypass most of the
function and only call xhci_td_cleanup() at the end.

Remove this skip option and call xhci_td_cleanup() directly instead
when needed

No functional changes

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman d36374fdfb xhci: cleanup virtual endoint structure, remove stopped_stream
Get rid of stopped_stream member in virtual endpoint structure as
it is only used in one case when cleaning a halted endpoint.

Pass it as function parameter instead.

No functional changes

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman ade2e3a148 xhci: handle transfer events without TRB pointer
Most transfer events have a TRB pointer indicating which TRB caused
the event.
In the case of streams, transfer events such as
USB Transaction error may have its TRB pointer set to zero.

driver won't know which stream or what TRB on that stream caused
the error, but it can issue a soft reset to recover the transfer.
A soft reset will clear the host side halt of the endpoint without
clearing Data toggle or sequence number, and let the transfer
continue from where it halted.

see xhci section 4.12 streams and 4.6.8.2 soft retry.

USB Transaction errors with a zero TRB pointer are seen with
UAS usb devices.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman 5eee4b6b4f xhci: support calling cleanup_halted_endpoint with soft retry
Add soft reset support to cleanup_halted_endpoint().
using soft reset will prevent it from setting a new dequeue pointer to
start the transfer from. Let it continue where it halted.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman 217491487c xhci: Add support for endpoint soft reset
xhci supports soft retry recovery when the host halted the host side of an
endopint but the connected USB device is not aware of the halt.

In this case xhci needs to issue a reset endopint command  with a TSP
(Transfer State Preserve) flag set which preserves the Data toggle
and Sequence number of the endpoint.

This feature is needed to handle a few special transfer event types
such as USB Transaction error that don't always point to a causing TRB.

see xhci 4.6.8.1 for more details

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman b3368382ef xhci: refactor transfer event errors and completion codes
Parse the transfer event first, and remove duplicate debugging
code.

Reorder completion codes according to endpoint state.

No functional changes

We are not handling some transfer events correcly and need to
clean up this before fixing it

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Mathias Nyman c5628a2af8 xhci: remove endpoint ring cache
Anurag Kumar Vulisha reported several issues with xhci endpoint
ring caching.

31 Rings are cached per device before a ring is freed.
These cached rings are not used as default if a new ring is needed.
They are only used if the driver fails to allocate memory for a ring.

The current ring cache is more a reason to why we run out memory than a
help when we actually do so.

Anurag Kumar Vulisha tried to use cached rings as a first option and
found new issues with cached ring initialization.
Cached rings were first zeroed and then manually reinitialized with link
trbs etc, but forgetting to set some important bits like cycle toggle bit.

Remove the ring cache completely as it's a faulty premature optimization
eating memory

Reported-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-15 22:17:46 +02:00
Arvind Yadav 264ffb194a usb: host: ehci-exynos: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13 10:48:24 +02:00
Corentin Labbe d2f48f05cd usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
When plugging an USB webcam I see the following message:
[106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk?
[106390.583860] handle_tx_event: 913 callbacks suppressed

With this patch applied, I get no more printing of this message.

Cc: <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 16:04:53 +02:00
YD Tseng b72eb8435b usb: xhci: Fix USB 3.1 supported protocol parsing
xHCI host controllers can have both USB 3.1 and 3.0 extended speed
protocol lists. If the USB3.1 speed is parsed first and 3.0 second then
the minor revision supported will be overwritten by the 3.0 speeds and
the USB3 roothub will only show support for USB 3.0 speeds.

This was the case with a xhci controller with the supported protocol
capability listed below.
In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub
is set as 0x10.  And then USB 3.0 is parsed.  However, the min_rev of
usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind
this host controller, the speed of USB 3.1 device just reports 5G speed
using lsusb.

     00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
  00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00
  10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00     //USB 3.1
  30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00     //USB 3.0
  50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00     //USB 2.0
  70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

This patch fixes the issue by only owerwriting the minor revision if
it is higher than the existing one.

[reword commit message -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: YD Tseng <yd_tseng@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 16:04:53 +02:00
Andy Shevchenko 94116f8126 ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.

acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07 12:20:49 +02:00
Tony Lindgren ef189c8dde usb: host: ohci-omap3: Remove driver in favor of ohci-platform
This driver is no longer needed and can be removed. The reason why
it's safe to remove this driver is that most omap devices don't have a
USB low-speed or full-speed compatible PHY installed and configured
with drivers/mfd/omap-usb-host.c. This means that devices like
beagleboard and pandaboard need to use a high-speed USB hub in order
to use devices like keyboard and mice.

Currently the only known configured for a full-speed PHY is the
mdm6600 modem on droid 4 and I've verified it works just fine with
ohci-platform.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:08:05 +09:00
Tony Lindgren 2545d85301 usb: host: ohci-platform: Add support for omap3 and later
With the runtime PM implemented for ohci-platform driver, we can
now support omap3 and later OHCI by adding one device tree
property.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:08:04 +09:00
Tony Lindgren 0aa0b93e7a usb: host: ohci-platform: Add basic runtime PM support
This is needed in preparation of adding support for omap3 and
later OHCI. The runtime PM will only do something on platforms
that implement it.

Cc: devicetree@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:08:04 +09:00
Mariusz Skamra fa72e6afa7 usb: Make use of ktime_* comparison functions
Start using ktime_* compare functions to make the code backportable.
Now that may be a bit tricky due to recent change of ktime_t.

Signed-off-by: Mariusz Skamra <mariuszx.skamra@intel.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:08:04 +09:00
Mathias Nyman e6b20121c6 xhci: Add helper to get hardware dequeue pointer for stopped rings.
Add xhci_get_hw_deq() helper to retrieve the hardware dequeue pointer an
endpoint or stream stopped on.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:02:58 +09:00
Mathias Nyman 8790736dbf xhci: Add stream id to xhci_dequeue_state structure
The values for the new dequeue segment, new dequeue pointer and new cycle
state are needed for manually moving the xHC ring dequeue pointer.
These are conveniently stored in a xhci_dequeue_state structure.

stream support was added later and stream_id was carried
as a function parameter.

Move the stream_id to the xhci_dequeue_state structure instead.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:02:58 +09:00
Mathias Nyman cdd504e113 xhci: Find out where an endpoint or stream stopped from its context.
When xHC is asked to stop an endpoint it will save the position it
stopped on in the endpoint or stream context.

xhci driver needs to know if the controller stopped on the exact same
TRB that the driver was asked to cancel as it then needs to move past
the TD instead of turning the TD to no-op TRBs.

xhci driver used to get the stopped position from a "stopped" transfer
event before the stop endpoint command completed, but if the ring
is already stopped, or in a halted or error state this event is missing.

Get the stopped position from the endpoint or stream context instead

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:02:58 +09:00
Mathias Nyman 11e1d25db6 xhci: remove unused stopped_td pointer
We no longer keep track of where we stopped in a stopped_td pointer.
We get the ring dequeue pointer from the endpoint or stream context

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:02:58 +09:00
Benjamin Herrenschmidt 4642d34a43 usb/uhci: Add support for Aspeed BMC SoCs
The Aspeed 2400/2500 families have a variant of UHCI which requires
some quirks to the driver to work:

 - The register offsets are different. We add a remapping helper.

 - All accesses have to be done via 32-bit loads and stores. We
   force all accessors to use readl/writel. This is of no consequence
   for reads as we never read "in the middle" of a register. For writes
   it also works fine as the registers only actually implement the bits
   we try to write (16-bit for the registers accessed with writew and
   8-bit for the register accessed with writeb), so always using a
   32-bit write will have no negative effect. We never do partial writes.

 - The resume detect interrupt is broken

 - The number of ports is (optionally) provided via the device-tree

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
--

v2. Remove the bulk of the #ifdef's

 drivers/usb/host/Kconfig         |  6 ++++-
 drivers/usb/host/uhci-hcd.c      | 17 +++++++++++---
 drivers/usb/host/uhci-hcd.h      | 51 ++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/uhci-platform.c | 22 ++++++++++++++++-
 4 files changed, 91 insertions(+), 5 deletions(-)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25 14:30:13 +02:00
Greg Kroah-Hartman 6acf116c95 Merge 4.12-rc2 into usb-next
We want the USB fixes in here as well to handle testing and merge
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-22 09:00:23 +02:00
Thomas Petazzoni 4b148d5144 usb: host: xhci-plat: propagate return value of platform_get_irq()
platform_get_irq() returns an error code, but the xhci-plat driver
ignores it and always returns -ENODEV. This is not correct, and
prevents -EPROBE_DEFER from being propagated properly.

CC: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:42 +02:00
Mathias Nyman 604d02a2a6 xhci: Fix command ring stop regression in 4.11
In 4.11 TRB completion codes were renamed to match spec.

Completion codes for command ring stopped and endpoint stopped
were mixed, leading to failures while handling a stopped command ring.

Use the correct completion code for command ring stopped events.

Fixes: 0b7c105a04 ("usb: host: xhci: rename completion codes to match spec")
Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:42 +02:00
Matthias Lange 5db851cf20 xhci: remove GFP_DMA flag from allocation
There is no reason to restrict allocations to the first 16MB ISA DMA
addresses.

It is causing problems in a virtualization setup with enabled IOMMU
(x86_64). The result is that USB is not working in the VM.

CC: <stable@vger.kernel.org>
Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:42 +02:00
Alan Stern 63aea0dbab USB: xhci: fix lock-inversion problem
With threaded interrupts, bottom-half handlers are called with
interrupts enabled.  Therefore they can't safely use spin_lock(); they
have to use spin_lock_irqsave().  Lockdep warns about a violation
occurring in xhci_irq():

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
4.11.0-rc8-dbg+ #1 Not tainted
---------------------------------------------------------
swapper/7/0 just changed the state of lock:
 (&(&ehci->lock)->rlock){-.-...}, at: [<ffffffffa0130a69>]
ehci_hrtimer_func+0x29/0xc0 [ehci_hcd]
but this lock took another, HARDIRQ-unsafe lock in the past:
 (hcd_urb_list_lock){+.....}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(hcd_urb_list_lock);
                               local_irq_disable();
                               lock(&(&ehci->lock)->rlock);
                               lock(hcd_urb_list_lock);
  <Interrupt>
    lock(&(&ehci->lock)->rlock);
 *** DEADLOCK ***

no locks held by swapper/7/0.
the shortest dependencies between 2nd lock and 1st lock:
 -> (hcd_urb_list_lock){+.....} ops: 252 {
    HARDIRQ-ON-W at:
                      __lock_acquire+0x602/0x1280
                      lock_acquire+0xd5/0x1c0
                      _raw_spin_lock+0x2f/0x40
                      usb_hcd_unlink_urb_from_ep+0x1b/0x60 [usbcore]
                      xhci_giveback_urb_in_irq.isra.45+0x70/0x1b0 [xhci_hcd]
                      finish_td.constprop.60+0x1d8/0x2e0 [xhci_hcd]
                      xhci_irq+0xdd6/0x1fa0 [xhci_hcd]
                      usb_hcd_irq+0x26/0x40 [usbcore]
                      irq_forced_thread_fn+0x2f/0x70
                      irq_thread+0x149/0x1d0
                      kthread+0x113/0x150
                      ret_from_fork+0x2e/0x40

This patch fixes the problem.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:42 +02:00
Peter Chen 6a29beef9d usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd
According to xHCI spec Figure 30: Interrupt Throttle Flow Diagram

	If PCI Message Signaled Interrupts (MSI or MSI-X) are enabled,
       	then the assertion of the Interrupt Pending (IP) flag in Figure 30
       	generates a PCI Dword write. The IP flag is automatically cleared
       	by the completion of the PCI write.

the MSI enabled HCs don't need to clear interrupt pending bit, but
hcd->irq = 0 doesn't equal to MSI enabled HCD. At some Dual-role
controller software designs, it sets hcd->irq as 0 to avoid HCD
requesting interrupt, and they want to decide when to call usb_hcd_irq
by software.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:41 +02:00
Peter Chen 7480d912d5 usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad
Buffer needs to be zeroed.

	...
	The following operations take place to allocate
       	Scratchpad Buffers to the xHC:
	...
		b. Software clears the Scratchpad Buffer to '0'

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:41 +02:00
Mathias Nyman a0c16630d3 xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
Intel Denverton microserver is Atom based and need the PME and CAS quirks
as well.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:41 +02:00
Mathias Nyman 7bc5d5aff3 usb: xhci: trace URB before giving it back instead of after
Don't access any members of a URB after giving it back.
URB might be freed by then already.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:19:41 +02:00
Gustavo A. R. Silva 2aa3add0cc usb: host: remove unnecessary null check
Remove unnecessary null check. udev->tt cannot ever be NULL when this
section of code runs.

Addresses-Coverity-ID: 100828
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 12:20:53 +02:00
Johan Hovold 5120a26692 USB: host: xhci: use max-port define
Use the new define for the maximum number of SuperSpeed ports instead of
a constant when allocating xHCI root hubs.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 11:53:02 +02:00
Johan Hovold a7415477a2 USB: ehci-platform: fix companion-device leak
Make sure do drop the reference taken to the companion device during
resume.

Fixes: d4d75128b8 ("usb: host: ehci-platform: fix usb 1.1 device is not connected in system resume")
Cc: stable <stable@vger.kernel.org>     # 4.11
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 11:52:44 +02:00
Chris Brandt 1f873d857b usb: r8a66597-hcd: select a different endpoint on timeout
If multiple endpoints on a single device have pending IN URBs and one
endpoint times out due to NAKs (perfectly legal), select a different
endpoint URB to try.
The existing code only checked to see another device address has pending
URBs and ignores other IN endpoints on the current device address. This
leads to endpoints never getting serviced if one endpoint is using NAK as
a flow control method.

Fixes: 5d3043586d ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 11:52:44 +02:00
Chris Brandt dd14a3e9b9 usb: r8a66597-hcd: decrease timeout
The timeout for BULK packets was 300ms which is a long time if other
endpoints or devices are waiting for their turn. Changing it to 50ms
greatly increased the overall performance for multi-endpoint devices.

Fixes: 5d3043586d ("usb: r8a66597-hcd: host controller driver for R8A6659")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-17 11:52:44 +02:00