Commit Graph

577 Commits

Author SHA1 Message Date
Linus Torvalds 0ad5b053d4 Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1.
 
 Lots of things in here, and it's later than expected due to some reverts
 to resolve some reported issues.  All is now clean with no reported
 problems in linux-next.
 
 Included in here is:
 	- interconnect updates
 	- mei driver updates
 	- uio updates
 	- nvmem driver updates
 	- soundwire updates
 	- binderfs updates
 	- coresight updates
 	- habanalabs updates
 	- mhi new bus type and core
 	- extcon driver updates
 	- some Kconfig cleanups
 	- other small misc driver cleanups and updates
 
 As mentioned, all have been in linux-next for a while, and with the last
 two reverts, all is calm and good.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
 rN4JJpOcTddvZcVlD+vo
 =ocWk
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc/other driver patches for 5.7-rc1.

  Lots of things in here, and it's later than expected due to some
  reverts to resolve some reported issues. All is now clean with no
  reported problems in linux-next.

  Included in here is:
   - interconnect updates
   - mei driver updates
   - uio updates
   - nvmem driver updates
   - soundwire updates
   - binderfs updates
   - coresight updates
   - habanalabs updates
   - mhi new bus type and core
   - extcon driver updates
   - some Kconfig cleanups
   - other small misc driver cleanups and updates

  As mentioned, all have been in linux-next for a while, and with the
  last two reverts, all is calm and good"

* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
  Revert "driver core: platform: Initialize dma_parms for platform devices"
  Revert "amba: Initialize dma_parms for amba devices"
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices
  bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
  bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
  bus: mhi: core: Add support for reading MHI info from device
  misc: rtsx: set correct pcr_ops for rts522A
  speakup: misc: Use dynamic minor numbers for speakup devices
  mei: me: add cedar fork device ids
  coresight: do not use the BIT() macro in the UAPI header
  Documentation: provide IBM contacts for embargoed hardware
  nvmem: core: remove nvmem_sysfs_get_groups()
  nvmem: core: use is_bin_visible for permissions
  nvmem: core: use device_register and device_unregister
  nvmem: core: add root_only member to nvmem device struct
  extcon: axp288: Add wakeup support
  extcon: Mark extcon_get_edev_name() function as exported symbol
  extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
  dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
  ...
2020-04-03 13:22:40 -07:00
Hans de Goede 9c94553099 extcon: axp288: Add wakeup support
On devices with an AXP288, we need to wakeup from suspend when a charger
is plugged in, so that we can do charger-type detection and so that the
axp288-charger driver, which listens for our extcon events, can configure
the input-current-limit accordingly.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:16:14 +09:00
Mayank Rana 995bb10923 extcon: Mark extcon_get_edev_name() function as exported symbol
extcon_get_edev_name() function provides client driver to request
extcon dev's name. If extcon driver and client driver are compiled
as loadable modules, extcon_get_edev_name() function symbol is not
visible to client driver. Hence mark extcon_find_edev_name() function
as exported symbol.

Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:16:13 +09:00
H. Nikolaus Schaller 3426ad6d40 extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
If the gpios are probed after this driver (e.g. if they
come from an i2c expander) there is no need to print an
error message.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2020-03-25 08:16:13 +09:00
Thomas Gleixner 20d320c664 extcon: axp288: Convert to new X86 CPU match macros
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131510.075227793@linutronix.de
2020-03-24 21:34:11 +01:00
Xu Wang 2ddf50a75d extcon: sm5502: Remove unneeded semicolon
Remove unneeded semicolon reported by coccinelle.

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
[cw00.choi: Edit patch title and description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-16 10:23:19 +09:00
Charles Keepax 4b28b25c30 extcon: arizona: Factor out microphone and button detection
Continue refactoring the microphone detect handling by factoring
out the handling for microphone detection and button detection
into separate functions. This both makes the code a little clearer
and prepares for some planned future refactoring to make the state
handling in the driver more explicit.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:15 +09:00
Charles Keepax 7e14fc437c extcon: arizona: Factor out microphone impedance into a function
The microphone detection handler is very long, start breaking it up
by factoring out the actual reading of the impedance value into a
separate functions. Additionally, this also fixes a minor bug and
ensures that the microphone timeout will be rescheduled in all error
cases.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:15 +09:00
Charles Keepax 3dfa743dcd extcon: arizona: Invert logic of check in arizona_hpdet_do_id
Invert the check of hpdet_acc_id at the top of arizona_hpdet_do_id to
reduce the identation within the function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:15 +09:00
Charles Keepax 8267ebcc46 extcon: arizona: Remove excessive WARN_ON
A WARN_ON is very strong for simply finding a button that is out of
range, downgrade this to a simple error message in the log.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax f4ba6c0ba7 extcon: arizona: Remove unnecessary sets of ACCDET_MODE
arizona_start_mic sets ACCDET_MODE as required for the microphone
detection as such it is redundant to set this outside of this function.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax d5aa46ddf9 extcon: arizona: Tidy up transition from mic to headphone detect
Moving from microphone detection to headphone detection is done fairly
haphazardly at the moment, sometimes calling arizona_stop_mic at the
call site sometimes relying on a call inside arizona_identify_headphone.
Simplify all this and always call arizona_stop_mic at the top of
arizona_identify_headphone.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax ac7614fab9 extcon: arizona: Clear jack status regardless of detection type
It makes sense to clear the internal state of the jack detection
regardless of if the headphone detect based accessory detection or
the normal microphone detect based flow is used.

No issues are currently known because of this but the change makes
more logical sense and eases future refactoring of the code.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax be87cb72bf extcon: arizona: Move pdata extraction to probe
It makes no sense to be extracting values from pdata for the first time
in the jack detection handler function, move this to probe time where it
belongs.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax b82f871a33 extcon: arizona: Make rev A register sequences atomic
The special register sequences that are applied for rev A of wm5102
should be applied atomically with respect to any other register writes.
Use regmap_multi_reg_write to ensure all writes happen under the regmap
lock.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Charles Keepax 9c8eaec8eb extcon: arizona: Correct clean up if arizona_identify_headphone fails
In the error path of arizona_identify_headphone, neither the clamp nor
the PM runtime are cleaned up. Add calls to clean up both of these.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-12-09 20:18:14 +09:00
Linus Torvalds 8f56e4ebe0 Char/Misc driver patches for 5.5-rc1
Here is the big set of char/misc and other driver patches for 5.5-rc1
 
 Loads of different things in here, this feels like the catch-all of
 driver subsystems these days.  Full details are in the shortlog, but
 nothing major overall, just lots of driver updates and additions.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXd6ewA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymNXACfebVkDrFOH9EqDgFArPvZ1i9EmZ4AoLbE1Wki
 ftJApk+Ov1BT2TvClOza
 =cXqg
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other driver patches for 5.5-rc1

  Loads of different things in here, this feels like the catch-all of
  driver subsystems these days. Full details are in the shortlog, but
  nothing major overall, just lots of driver updates and additions.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits)
  char: Fix Kconfig indentation, continued
  habanalabs: add more protection of device during reset
  habanalabs: flush EQ workers in hard reset
  habanalabs: make the reset code more consistent
  habanalabs: expose reset counters via existing INFO IOCTL
  habanalabs: make code more concise
  habanalabs: use defines for F/W files
  habanalabs: remove prints on successful device initialization
  habanalabs: remove unnecessary checks
  habanalabs: invalidate MMU cache only once
  habanalabs: skip VA block list update in reset flow
  habanalabs: optimize MMU unmap
  habanalabs: prevent read/write from/to the device during hard reset
  habanalabs: split MMU properties to PCI/DRAM
  habanalabs: re-factor MMU masks and documentation
  habanalabs: type specific MMU cache invalidation
  habanalabs: re-factor memory module code
  habanalabs: export uapi defines to user-space
  habanalabs: don't print error when queues are full
  habanalabs: increase max jobs number to 512
  ...
2019-11-27 10:53:50 -08:00
Heikki Krogerus a69dff9954 extcon: axp288: Remove the build-in connection description
Getting handle to the USB role switch by first finding its
software fwnode.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20191008122600.22340-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04 15:05:26 +01:00
Colin Ian King ddd1bbbae4 extcon: sm5502: remove redundant assignment to variable cable_type
The variable cable_type is being initialized with a value that
is never read and is being re-assigned a little later on. The
assignment is redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-10-31 13:47:42 +09:00
Stephan Gerhold 6942635032 extcon: sm5502: Reset registers during initialization
On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader
seems to keep interrupts enabled for SM5502 when booting Linux.
Changing the cable state (i.e. plugging in a cable) - until the driver
is loaded - will therefore produce an interrupt that is never read.

In this situation, the cable state will be stuck forever on the
initial state because SM5502 stops sending interrupts.
This can be avoided by clearing those pending interrupts after
the driver has been loaded.

One way to do this is to reset all registers to default state
by writing to SM5502_REG_RESET. This ensures that we start from
a clean state, with all interrupts disabled.

Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-10-11 10:43:26 +09:00
Yauhen Kharuzhy e81b889329 extcon-intel-cht-wc: Don't reset USB data connection at probe
Intel Cherry Trail Whiskey Cove extcon driver connect USB data lines to
PMIC at driver probing for further charger detection. This causes reset of
USB data sessions and removing all devices from bus. If system was
booted from Live CD or USB dongle, this makes system unusable.

Check if USB ID pin is floating and re-route data lines in this case
only, don't touch otherwise.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
[cw00.choi: Clean-up the minor coding style]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-10-01 06:46:30 +09:00
Linus Torvalds 32b90daf5c chrome platform changes for v5.4
* CrOS EC / MFD Migration
  - Move cros_ec core driver from mfd into chrome platform.
 
 * Wilco EC:
  - Add batt_ppid_info command to Wilco telemetry driver.
 
 * CrOS EC:
  - cros_ec_rpmsg : Add support to inform EC of suspend/resume status
  - cros_ec_rpmsg : Fix race condition on probe failed
  - cros_ec_chardev : Add a poll handler to receive MKBP events
 
 * Misc:
  - bugfixes in cros_usbpd_logger and cros_ec_ishtp
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXYKpygAKCRBzbaomhzOw
 wlkXAP9QCKia7LiNujIl9kh7WXSloxdO0BzL93pgSpNHfUDeSAD+Mlcp+54bDqkB
 WaF2SR14Z2vzAFafroQTl6m41xJTog4=
 =slD7
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "CrOS EC / MFD Migration:
    - Move cros_ec core driver from mfd into chrome platform.

  Wilco EC:
    - Add batt_ppid_info command to Wilco telemetry driver.

  CrOS EC:
    - cros_ec_rpmsg : Add support to inform EC of suspend/resume status
    - cros_ec_rpmsg : Fix race condition on probe failed
    - cros_ec_chardev : Add a poll handler to receive MKBP events

  Misc:
    - bugfixes in cros_usbpd_logger and cros_ec_ishtp"

* tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue
  platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events
  platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed
  platform/chrome: chromeos_tbmc: Report wake events
  mfd: cros_ec: Use mfd_add_hotplug_devices() helper
  mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices
  mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs
  mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper
  mfd / platform: cros_ec: Reorganize platform and mfd includes
  mfd / platform: cros_ec: Rename config to a better name
  mfd: cros_ec: Switch to use the new cros-ec-chardev driver
  mfd / platform: cros_ec: Miscellaneous character device to talk with the EC
  mfd / platform: cros_ec: Move cros-ec core driver out from MFD
  mfd / platform: cros_ec: Handle chained ECs as platform devices
  platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support
  platform/chrome: chromeos_laptop: drop checks of NULL-safe functions
  platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-19 14:14:28 -07:00
Enric Balletbo i Serra 840d9f131f mfd / platform: cros_ec: Reorganize platform and mfd includes
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.

In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:

 - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
 - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
   driver from include/linux/mfd/cros_ec.h to a new file
   include/linux/platform_data/cros_ec_proto.h
 - Update all the drivers with the new includes, so
   - Drivers that only need to know about the protocol include
     - linux/platform_data/cros_ec_proto.h
     - linux/platform_data/cros_ec_commands.h
   - Drivers that need to know about the cros-ec mfd device also include
     - linux/mfd/cros_ec.h

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 11:33:42 +01:00
Enric Balletbo i Serra 47f11e0b40 mfd / platform: cros_ec: Move cros-ec core driver out from MFD
Now, the ChromeOS EC core driver has nothing related to an MFD device, so
move that driver from the MFD subsystem to the platform/chrome subsystem.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-09-02 11:33:12 +01:00
Stephen Boyd a3fc572339 extcon: adc-jack: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[cw00.choi: Edit patch title and description for readability]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-31 09:55:46 +09:00
Andy Shevchenko 21be848ebc extcon: axp288: Use for_each_set_bit() in axp288_extcon_log_rsi()
This simplifies and standardizes axp288_extcon_log_rsi()
by using for_each_set_bit() library function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29 10:24:14 +09:00
Andy Shevchenko d72e3dc791 extcon: axp288: Add missed error check
It seems from the very beginning the error check has been missed
in axp288_extcon_log_rsi(). Add it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29 10:23:46 +09:00
Vasyl Gomonovych 005ad18727 extcon: sm5502: Add IRQ_ONESHOT
Do not fire irq again until thread done

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24 19:32:19 +09:00
Linus Walleij 8bc4810b43 extcon: gpio: Request reasonable interrupts
The only thing that makes sense is to request a falling edge interrupt
if the line is active low and a rising edge interrupt if the line is
active high, so just do that and get rid of the assignment from
platform data. The GPIO descriptor knows if the line is active high
or low.

Also make irq a local variable in probe(), it's not used anywhere else.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[cw00.choi: Fix build error of data->irq_flags]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24 19:20:19 +09:00
Linus Walleij 6527c6856f extcon: fsa9480: Support the FSA880 variant
The older compatible variant of this chip is called FSA880
and works the same way, if we need some quirks in the future,
it is good to let it have its own compatible string.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24 19:10:19 +09:00
Wolfram Sang a6d9cfcb85 extcon: extcon-max77843: convert to i2c_new_dummy_device
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24 18:59:05 +09:00
Andy Shevchenko a104dbc527 extcon: arizona: Switch to use device_property_count_u32()
Use use device_property_count_u32() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-24 18:57:42 +09:00
Greg Kroah-Hartman c1829acefc Update extcon for 5.3
Detailed description for this pull request:
 1. Add new extcon-fsa9480 extcon provider driver
 - It is extcon provide driver for Fairchild Semiconductor
 FSA9480 microUSB switch and accessory detector chip which
 detects the kind of external connector like usb, charger,
 audio, video and so on.
 
 2.
 - Add the exception handling code for extcon-arizona.c
 when using the regmap interface.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdFWxaAAoJEJzN3yze689TNsUP/Rd/u8cTzSvOkQ7VYda7DOYx
 fupuYg7OQzvwxvJtcd6LAPgZ2m+tDkaDD2+98hl0GBv662mW+a5BVOfOn/zGTsa5
 aLTbVHCmAeErE2E84r/lUwviVLtpEBo1zAcBCAlEi17NMzwQ3yqOMCqpXtF9luz8
 6kCMMDtILLsw2kveKgnATO8JppRAA1x4TZq0XYdTMQiI7uNGciiXTJYXk6xZh63V
 yLyjY1QUNkCFjiZkfLlAMQC6yCoZMoYE8KpC5fg8YyXDtnPWtKH+djLVyiYYsHxi
 g6K31DB5SiiejeoKrhB2dS4IbkktuGGgfwI9bT2xvdLf22ZsH09hrjaezCWqrw0R
 TAUPRw8crkVYYYxwvGHM6UaBul2CYSiF4dyrBi7AzQuPGmux/apSdtKU3gv0u95d
 +QEGMqzfHYv/85Mb8hpBuhPOtsr5s6LKmqnumQYweCVhTkKsngYQOyQ/UzIzobBl
 T/EChUVurzVOLhFQdVLLEdEhlD/CsIoEFIZMcemrXt38LqO/OkWDhkGqqb736ckv
 hM4ntqlOBL8rrPwf7tZUHQG0koBkMvon96VcF62Y2WFT0UTt0bow6t8o44ZZ1Cx9
 f1s46JU6a+F4WrLelVO3krtHM3I3u5YEBQzBWAvcU60hPaEB4l0R0jVUKtRAMyNP
 qzrJSVYoAeZDCGbEGYfV
 =MUjA
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 5.3

Detailed description for this pull request:
1. Add new extcon-fsa9480 extcon provider driver
- It is extcon provide driver for Fairchild Semiconductor
FSA9480 microUSB switch and accessory detector chip which
detects the kind of external connector like usb, charger,
audio, video and so on.

2.
- Add the exception handling code for extcon-arizona.c
when using the regmap interface.

* tag 'extcon-next-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: fsa9480: Fix Kconfig warning and build errors
  extcon: Add fsa9480 extcon driver
  dt-bindings: extcon: Add support for fsa9480 switch
  extcon: arizona: Correct error handling on regmap_update_bits_check
2019-07-01 10:58:54 +02:00
Randy Dunlap 0937fbb7ab extcon: fsa9480: Fix Kconfig warning and build errors
Fix Kconfig dependency warning and subsequent build errors caused by
the Kconfig entry for EXTCON-FSA9480.  It should not select
REGMAP_I2C unless I2C is already set/enabled.

WARNING: unmet direct dependencies detected for REGMAP_I2C
  Depends on [n]: I2C [=n]
  Selected by [y]:
  - EXTCON_FSA9480 [=y] && EXTCON [=y] && INPUT [=y]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[cw00.choi: adjust the patch title and remove the long warning messages]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-06-26 17:27:39 +09:00
Tomasz Figa bad5b5e707 extcon: Add fsa9480 extcon driver
This patch adds extcon driver for Fairchild Semiconductor FSA9480
microUSB switch.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-06-22 21:34:51 +09:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner ac1dc6b2e7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 6 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.720704315@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:06 +02:00
Thomas Gleixner 9c92ab6191 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282
Based on 1 normalized pattern(s):

  this software is licensed under the terms of the gnu general public
  license version 2 as published by the free software foundation and
  may be copied distributed and modified under those terms this
  program is distributed in the hope that it will be useful but
  without any warranty without even the implied warranty of
  merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 285 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:36:37 +02:00
Thomas Gleixner 1802d0beec treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 655 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:41 -07:00
Thomas Gleixner c942fddf87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:37 -07:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Charles Keepax fbdc60b2a7 extcon: arizona: Correct error handling on regmap_update_bits_check
Ensure the case when regmap_update_bits_check fails and the change
variable is not updated is handled correctly.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-05-30 10:02:17 +09:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds f678d6da74 Char/Misc patches for 5.2-rc1 - part 2
Here is the "real" big set of char/misc driver patches for 5.2-rc1
 
 Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups
 
 Feels like this tree is getting to be a dumping ground of "small driver
 subsystems" these days.  Which is fine with me, if it makes things
 easier for those subsystem maintainers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
 f6V3MvRffg4qUp3cGbU=
 =R37j
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc update part 2 from Greg KH:
 "Here is the "real" big set of char/misc driver patches for 5.2-rc1

  Loads of different driver subsystem stuff in here, all over the places:
   - thunderbolt driver updates
   - habanalabs driver updates
   - nvmem driver updates
   - extcon driver updates
   - intel_th driver updates
   - mei driver updates
   - coresight driver updates
   - soundwire driver cleanups and updates
   - fastrpc driver updates
   - other minor driver updates
   - chardev minor fixups

  Feels like this tree is getting to be a dumping ground of "small
  driver subsystems" these days. Which is fine with me, if it makes
  things easier for those subsystem maintainers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  intel_th: msu: Add current window tracking
  intel_th: msu: Add a sysfs attribute to trigger window switch
  intel_th: msu: Correct the block wrap detection
  intel_th: Add switch triggering support
  intel_th: gth: Factor out trace start/stop
  intel_th: msu: Factor out pipeline draining
  intel_th: msu: Switch over to scatterlist
  intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
  intel_th: Only report useful IRQs to subdevices
  intel_th: msu: Start handling IRQs
  intel_th: pci: Use MSI interrupt signalling
  intel_th: Communicate IRQ via resource
  intel_th: Add "rtit" source device
  intel_th: Skip subdevices if their MMIO is missing
  intel_th: Rework resource passing between glue layers and core
  intel_th: SPDX-ify the documentation
  intel_th: msu: Fix single mode with IOMMU
  coresight: funnel: Support static funnel
  dt-bindings: arm: coresight: Unify funnel DT binding
  coresight: replicator: Add new device id for static replicator
  ...
2019-05-07 13:39:22 -07:00
Rafael J. Wysocki 7e8e05fd08 Merge branches 'acpi-utils', 'acpi-video', 'acpi-soc' and 'acpi-button'
* acpi-utils:
  gpio: merrifield: Fix build err without CONFIG_ACPI
  ACPI / utils: Remove deprecated function since no user left
  ASoC: Intel: cht_bsw_rt5672: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: cht_bsw_rt5645: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5651: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcr_rt5640: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_es8316: Convert to use acpi_dev_get_first_match_dev()
  ASoC: Intel: bytcht_da7213: Convert to use acpi_dev_get_first_match_dev()
  gpio: merrifield: Convert to use acpi_dev_get_first_match_dev()
  extcon: axp288: Convert to use acpi_dev_get_first_match_dev()
  ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper

* acpi-video:
  ACPI: video: Use vendor backlight on Sony VPCEH3U1E

* acpi-soc:
  ACPI / LPSS: Use acpi_lpss_* instead of acpi_subsys_* functions for hibernate

* acpi-button:
  ACPI: button: reinitialize button state upon resume
2019-05-06 10:50:08 +02:00
Charles Keepax 00053de522 extcon: arizona: Disable mic detect if running when driver is removed
Microphone detection provides the button detection features on the
Arizona CODECs as such it will be running if the jack is currently
inserted. If the driver is unbound whilst the jack is still inserted
this will cause warnings from the regulator framework as the MICVDD
regulator is put but was never disabled.

Correct this by disabling microphone detection on driver removal and if
the microphone detection was running disable the regulator and put the
runtime reference that was currently held.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-12 09:38:40 +09:00
YueHaibing fa3c098c2d extcon: axp288: Add a depends on ACPI to the Kconfig entry
As Hans de Goede pointed, using this driver without ACPI
makes little sense, so add ACPI dependency to Kconfig entry
to fix a build error while CONFIG_ACPI is not set.

drivers/extcon/extcon-axp288.c: In function 'axp288_extcon_probe':
drivers/extcon/extcon-axp288.c:363:20: error: dereferencing pointer to incomplete type
    put_device(&adev->dev);

Fixes: 0cf064db94 ("extcon: axp288: Convert to use acpi_dev_get_first_match_dev()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-12 08:23:24 +09:00
Andy Shevchenko 492929c547 extcon: mrfld: Introduce extcon driver for Basin Cove PMIC
On Intel Merrifield the Basin Cove PMIC provides a feature to detect
the USB connection type. This driver utilizes the feature in order
to support the USB dual role detection.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05 10:21:41 +09:00
Andy Shevchenko 098b7ae8ec extcon: intel: Split out some definitions to a common header
We are going to use some definitions in the other Intel extcon drivers,
thus, split out them to a common header file.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05 10:21:41 +09:00
Valdis Klētnieks db8b4aefd1 extcon: Fix build warning for extcon_unregister_notifier comment
Give the line the asterisk it wanted to fix the build warning.

[Build warning message]
Building with W=1 reports:

  CC      drivers/extcon/devres.o
drivers/extcon/devres.c:208: warning: bad line:
	- Resource-managed extcon_unregister_notifier()

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
[cw00.choi: Edit the patch subject and description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-04-05 10:21:41 +09:00