Commit Graph

72 Commits

Author SHA1 Message Date
Josh Poimboeuf 607a4029d4 objtool: Support unoptimized frame pointer setup
Arnd Bergmann reported a bunch of warnings like:

  crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
  crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup

and

  arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
  arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup

With certain rare configurations, GCC sometimes sets up the frame
pointer with:

  lea    (%rsp),%rbp

instead of:

  mov    %rsp,%rbp

The instructions are equivalent, so treat the former like the latter.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-28 07:25:54 +02:00
Josh Poimboeuf f5caf621ee x86/asm: Fix inline asm call constraints for Clang
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:

  static inline void foo()
  {
	register void *__sp asm(_ASM_SP);
	asm("call bar" : "+r" (__sp))
  }

Unfortunately, that pattern causes Clang to corrupt the stack pointer.

The fix is easy: convert the stack pointer register variable to a global
variable.

It should be noted that the end result is different based on the GCC
version.  With GCC 6.4, this patch has exactly the same result as
before:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9820389		9491555		8816046		8516940
 after	9820389		9491555		8816046		8516940

With GCC 7.2, however, GCC's behavior has changed.  It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm.  (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.)  It's a bit
overkill, but the performance impact should be negligible.  And in fact,
there's a nice improvement with frame pointers disabled:

	defconfig	defconfig-nofp	distro		distro-nofp
 before	9796316		9468236		9076191		8790305
 after	9796957		9464267		9076381		8785949

So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.

Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-23 15:06:20 +02:00
Josh Poimboeuf 0d0970eef3 objtool: Handle another GCC stack pointer adjustment bug
The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:

  net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0

This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:

    2f91:       48 89 e0                mov    %rsp,%rax
    2f94:       4c 89 e7                mov    %r12,%rdi
    2f97:       4c 89 f6                mov    %r14,%rsi
    2f9a:       ba 20 00 00 00          mov    $0x20,%edx
    2f9f:       48 89 c4                mov    %rax,%rsp

This issue would have been happily ignored before the following commit:

  dd88a0a0c8 ("objtool: Handle GCC stack pointer adjustment bug")

But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly.  In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dd88a0a0c8 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-23 15:06:19 +02:00
Josh Poimboeuf 97dab2ae7e objtool: Fix object file corruption
Arnd Bergmann reported that a randconfig build was failing with the
following link error:

  built-in.o: member arch/x86/kernel/time.o in archive is not an object

It turns out the link failed because the time.o file had been corrupted
by objtool:

  nm: arch/x86/kernel/time.o: File format not recognized

In certain rare cases, when a .o file's ORC table is very small, the
.data section size doesn't change because it's page aligned.  Because
all the existing sections haven't changed size, libelf doesn't detect
any section header changes, and so it doesn't update the section header
table properly.  Instead it writes junk in the section header entries
for the new ORC sections.

Make sure libelf properly updates the section header table by setting
the ELF_F_DIRTY flag in the top level elf struct.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/e650fd0f2d8a209d1409a9785deb101fdaed55fb.1505459813.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-15 11:31:57 +02:00
Petr Vandrovec df968c9329 objtool: Do not retrieve data from empty sections
Binutils 2.29-9 in Debian return an error when elf_getdata is invoked
on empty section (.note.GNU-stack in all kernel files), causing
immediate failure of kernel build with:

  elf_getdata: can't manipulate null section

As nothing is done with sections that have zero size, just do not
retrieve their data at all.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2ce30a44349065b70d0f00e71e286dc0cbe745e6.1505459652.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-15 11:31:50 +02:00
Martin Kepplinger 0998b7a0be objtool: Fix memory leak in elf_create_rela_section()
Let's free the allocated char array 'relaname' before returning,
in order to avoid leaking memory.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mingo.kernel.org@gmail.com
Link: http://lkml.kernel.org/r/20170914060138.26472-1-martink@posteo.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-15 11:31:43 +02:00
Josh Poimboeuf dd88a0a0c8 objtool: Handle GCC stack pointer adjustment bug
Arnd Bergmann reported the following warning with GCC 7.1.1:

  fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96

And the kbuild robot reported the following warnings with GCC 5.4.1:

  fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
  fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
  fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120

Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer.  It does:

  lea    0x8(%rsp), %rcx
  ...
  mov    %rcx, %rsp

Instead of the obvious:

  add    $0x8, %rsp

It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:

  https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813

But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while.  So for now we have to track register
values when they're loaded with stack pointer offsets.

This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality.  Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-30 10:48:41 +02:00
Josh Poimboeuf ee97638b57 objtool: Fix objtool fallthrough detection with function padding
When GCC adds NOP padding between functions, those NOPs aren't
associated with a function symbol, which breaks objtool's detection of a
function falling through to another function.  Instead it shows
confusing errors like:

  drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x8b: return with modified stack frame
  drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x0: stack state mismatch: cfa1=-4-32 cfa2=7+8
  drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x8: unknown stack-related register move
  drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x0: stack state mismatch: cfa1=6+16 cfa2=7+8
  drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0xa: unsupported stack pointer realignment
  drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0x0: stack state mismatch: cfa1=-4-40 cfa2=7+8

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/43e7aae9a7a7710cd6df597fa9dc501da4ba0602.1502472193.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-21 16:06:05 +02:00
Josh Poimboeuf bf4d1a8375 objtool: Track DRAP separately from callee-saved registers
When GCC realigns a function's stack, it sometimes uses %r13 as the DRAP
register, like:

  push	%r13
  lea	0x10(%rsp), %r13
  and	$0xfffffffffffffff0, %rsp
  pushq	-0x8(%r13)
  push	%rbp
  mov	%rsp, %rbp
  push	%r13
  ...
  mov	-0x8(%rbp),%r13
  leaveq
  lea	-0x10(%r13), %rsp
  pop	%r13
  retq

Since %r13 was pushed onto the stack twice, its two stack locations need
to be stored separately.  The first push of %r13 is its original value,
and the second push of %r13 is the caller's stack frame address.

Since %r13 is a callee-saved register, we need to track the stack
location of its original value separately from the DRAP register.

This fixes the following false positive warning:

  lib/ubsan.o: warning: objtool: val_to_string.constprop.7()+0x97: leave instruction with modified stack frame

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/3da23a6d4c5b3c1e21fc2ccc21a73941b97ff20a.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11 14:06:15 +02:00
Josh Poimboeuf 12b25729a1 objtool: Fix validate_branch() return codes
The validate_branch() function should never return a negative value.
Errors are treated as warnings so that even if something goes wrong,
objtool does its best to generate ORC data for the rest of the file.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/d86671cfde823b50477cd2f6f548dfe54871e24d.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-11 14:06:14 +02:00
Josh Poimboeuf 21ec3bf6ae objtool: Disable GCC '-Wpacked' warnings
Objtool is failing to build with GCC 4.4.7 due to the following
warnings:

  cc1: warnings being treated as errors
  In file included from orc.h:21,
                   from orc_gen.c:21:
  orc_types.h:86: error: packed attribute is unnecessary for ‘sp_offset’
  orc_types.h:87: error: packed attribute is unnecessary for ‘bp_offset’
  orc_types.h:88: error: packed attribute is unnecessary for ‘sp_reg’

I suspect those warnings are a GCC bug.  But -Wpacked isn't very useful
anyway, so just disable it.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/76d85d7b5a87566465095c500bce222ff5d7b146.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 08:33:32 +02:00
Josh Poimboeuf 5b8de48e82 objtool: Fix '-mtune=atom' decoding support in objtool 2.0
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.

Instead of:

  mov %rsp, %rbp

it does:

  lea (%rsp), %rbp

And instead of:

  add imm, %rsp

it does:

  lea disp(%rsp), %rsp

Add support for these instructions to the objtool decoder.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 08:33:32 +02:00
Josh Poimboeuf 0e2bb2bc14 objtool: Skip unreachable warnings for 'alt' instructions
When a whitelisted function uses one of the ALTERNATIVE macros, it
produces false positive warnings like:

  arch/x86/kvm/vmx.o: warning: objtool: .altinstr_replacement+0x0: unreachable instruction
  arch/x86/kvm/svm.o: warning: objtool: .altinstr_replacement+0x6e: unreachable instruction

There's no easy way to whitelist alternative instructions, so instead
just skip any 'unreachable' warnings associated with them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a5d0a8c60155f03b36a31fac871e12cf75f35fd0.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 08:33:32 +02:00
Josh Poimboeuf 649ea4d5a6 objtool: Assume unannotated UD2 instructions are dead ends
Arnd reported some false positive warnings with GCC 7:

  drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
  drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
  drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
  drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
  drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
  drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
  drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()

When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.

Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable().  So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.

Previously, objtool *did* assume UD2 was always a dead end.  That
changed with the following commit:

  d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")

The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end.  However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:

  9a93848fe7 ("x86/debug: Implement __WARN() using UD0")

For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().

But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-28 08:33:32 +02:00
Josh Poimboeuf 867ac9d737 objtool: Fix gcov check for older versions of GCC
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.

However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.

As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.

Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.

Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-25 11:12:45 +02:00
Josh Poimboeuf 39358a033b objtool, x86: Add facility for asm code to provide unwind hints
Some asm (and inline asm) code does special things to the stack which
objtool can't understand.  (Nor can GCC or GNU assembler, for that
matter.)  In such cases we need a facility for the code to provide
annotations, so the unwinder can unwind through it.

This provides such a facility, in the form of unwind hints.  They're
similar to the GNU assembler .cfi* directives, but they give more
information, and are needed in far fewer places, because objtool can
fill in the blanks by following branches and adjusting the stack pointer
for pushes and pops.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/0f5f3c9104fca559ff4088bece1d14ae3bca52d5.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 10:57:44 +02:00
Josh Poimboeuf 627fce1480 objtool: Add ORC unwind table generation
Now that objtool knows the states of all registers on the stack for each
instruction, it's straightforward to generate debuginfo for an unwinder
to use.

Instead of generating DWARF, generate a new format called ORC, which is
more suitable for an in-kernel unwinder.  See
Documentation/x86/orc-unwinder.txt for a more detailed description of
this new debuginfo format and why it's preferable to DWARF.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c9b9f01ba6c5ed2bdc9bb0957b78167fdbf9632e.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-18 10:57:43 +02:00
Josh Poimboeuf 4855022a52 objtool: Fix sibling call detection logic
With some configs, objtool reports the following warning:

  arch/x86/kernel/ftrace.o: warning: objtool: ftrace_modify_code_direct()+0x2d: sibling call from callable instruction with modified stack frame

The instruction it's complaining about isn't actually a sibling call.
It's just a normal jump to an address inside the function.  Objtool
thought it was a sibling call because the instruction's jump_dest wasn't
initialized because the function was supposed to be ignored due to its
use of sync_core().

Objtool ended up validating the function instead of ignoring it because
it didn't properly recognize a sibling call to the function.  So fix the
sibling call logic.  Also add a warning to catch ignored functions being
validated so we'll get a more useful error message next time.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/96cc8ecbcdd8cb29ddd783817b4af918a6a171b0.1499437107.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-08 10:29:48 +02:00
Linus Torvalds 7447d56217 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Most of the changes are for tooling, the main changes in this cycle were:

   - Improve Intel-PT hardware tracing support, both on the kernel and
     on the tooling side: PTWRITE instruction support, power events for
     C-state tracing, etc. (Adrian Hunter)

   - Add support to measure SMI cost to the x86 architecture, with
     tooling support in 'perf stat' (Kan Liang)

   - Support function filtering in 'perf ftrace', plus related
     improvements (Namhyung Kim)

   - Allow adding and removing fields to the default 'perf script'
     columns, using + or - as field prefixes to do so (Andi Kleen)

   - Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
     (Mark Santaniello)

   - Add perf tooling unwind support for PowerPC (Paolo Bonzini)

   - ... and various other improvements as well"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  perf auxtrace: Add CPU filter support
  perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
  perf intel-pt: Update documentation to include new ptwrite and power events
  perf intel-pt: Add example script for power events and PTWRITE
  perf intel-pt: Synthesize new power and "ptwrite" events
  perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
  perf intel-pt: Factor out intel_pt_set_event_name()
  perf intel-pt: Tidy messages into called function intel_pt_synth_event()
  perf intel-pt: Tidy Intel PT evsel lookup into separate function
  perf intel-pt: Join needlessly wrapped lines
  perf intel-pt: Remove unused instructions_sample_period
  perf intel-pt: Factor out common code synthesizing event samples
  perf script: Add synthesized Intel PT power and ptwrite events
  perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
  perf script: Add 'synth' field for synthesized event payloads
  perf auxtrace: Add itrace option to output power events
  perf auxtrace: Add itrace option to output ptwrite events
  tools include: Add byte-swapping macros to kernel.h
  perf script: Add 'synth' event type for synthesized events
  x86/insn: perf tools: Add new ptwrite instruction
  ...
2017-07-03 12:40:46 -07:00
Josh Poimboeuf 2513cbf9d6 objtool: Silence warnings for functions which use IRET
Previously, objtool ignored functions which have the IRET instruction
in them.  That's because it assumed that such functions know what
they're doing with respect to frame pointers.

With the new "objtool 2.0" changes, it stopped ignoring such functions,
and started complaining about them:

  arch/x86/kernel/alternative.o: warning: objtool: do_sync_core()+0x1b: unsupported instruction in callable function
  arch/x86/kernel/alternative.o: warning: objtool: text_poke()+0x1a8: unsupported instruction in callable function
  arch/x86/kernel/ftrace.o: warning: objtool: do_sync_core()+0x16: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: machine_check_poll()+0x166: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: do_machine_check()+0x147: unsupported instruction in callable function

Silence those warnings for now.  They can be re-enabled later, once we
have unwind hints which will allow the code to annotate the IRET usages.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/20170630140934.mmwtpockvpupahro@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 19:43:50 +02:00
Josh Poimboeuf baa41469a7 objtool: Implement stack validation 2.0
This is a major rewrite of objtool.  Instead of only tracking frame
pointer changes, it now tracks all stack-related operations, including
all register saves/restores.

In addition to making stack validation more robust, this also paves the
way for undwarf generation.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 10:19:19 +02:00
Josh Poimboeuf dcc914f44f objtool: Move checking code to check.c
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 10:19:19 +02:00
Adrian Hunter d5b1a5f660 x86/insn: perf tools: Add new ptwrite instruction
Add ptwrite to the op code map and the perf tools new instructions test.
To run the test:

  $ tools/perf/perf test "x86 ins"
  39: Test x86 instruction decoder - new instructions          : Ok

Or to see the details:

  $ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite

For information about ptwrite, refer the Intel SDM.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-27 11:58:04 -03:00
Kees Cook 92b0a1416b objtool: Add fortify_panic as __noreturn function
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function,
so objtool needs to know about it too.

Suggested-by: Daniel Micay <danielmicay@gmail.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-16 10:50:59 +02:00
Arnaldo Carvalho de Melo 0061459744 objtool: Drop ARRAY_SIZE() definition, tools/include/linux/kernel.h has it now
And with the goodies present in the kernel.h counterpart, i.e. checking
that the parameter is an array at build time.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-roiwxwgwgld4kygn65if60wa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:44 -03:00
Josh Poimboeuf 5c51f4ae84 objtool: Fix another GCC jump table detection issue
Arnd Bergmann reported a (false positive) objtool warning:

  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer

The issue is in find_switch_table().  It tries to find a switch
statement's jump table by walking backwards from an indirect jump
instruction, looking for a relocation to the .rodata section.  In this
case it stopped walking prematurely: the first .rodata relocation it
encountered was for a variable (resp_state_name) instead of a jump
table, so it just assumed there wasn't a jump table.

The fix is to ignore any .rodata relocation which refers to an ELF
object symbol.  This works because the jump tables are anonymous and
have no symbols associated with them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-07 08:42:55 +01:00
Josh Poimboeuf e390f9a968 objtool, modules: Discard objtool annotation sections for modules
The '__unreachable' and '__func_stack_frame_non_standard' sections are
only used at compile time.  They're discarded for vmlinux but they
should also be discarded for modules.

Since this is a recurring pattern, prefix the section names with
".discard.".  It's a nice convention and vmlinux.lds.h already discards
such sections.

Also remove the 'a' (allocatable) flag from the __unreachable section
since it doesn't make sense for a discarded section.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01 20:32:25 +01:00
Josh Poimboeuf d1091c7fa3 objtool: Improve detection of BUG() and other dead ends
The BUG() macro's use of __builtin_unreachable() via the unreachable()
macro tells gcc that the instruction is a dead end, and that it's safe
to assume the current code path will not execute past the previous
instruction.

On x86, the BUG() macro is implemented with the 'ud2' instruction.  When
objtool's branch analysis sees that instruction, it knows the current
code path has come to a dead end.

Peter Zijlstra has been working on a patch to change the WARN macros to
use 'ud2'.  That patch will break objtool's assumption that 'ud2' is
always a dead end.

Generally it's best for objtool to avoid making those kinds of
assumptions anyway.  The more ignorant it is of kernel code internals,
the better.

So create a more generic way for objtool to detect dead ends by adding
an annotation to the unreachable() macro.  The annotation stores a
pointer to the end of the unreachable code path in an '__unreachable'
section.  Objtool can read that section to find the dead ends.

Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/41a6d33971462ebd944a1c60ad4bf5be86c17b77.1487712920.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24 09:10:52 +01:00
Jiri Slaby b5b46c4740 objtool: Fix IRET's opcode
The IRET opcode is 0xcf according to the Intel manual and also to objdump of my
vmlinux:

    1ea8:       48 cf                   iretq

Fix the opcode in arch_decode_instruction().

The previous value (0xc5) seems to correspond to LDS.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170118132921.19319-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-19 08:39:44 +01:00
Linus Torvalds 41e0e24b45 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
   about missing CRCs (Nick Piggin)

 - asm-exports fix for LTO (Nicolas Pitre)

 - thin archives improvements (Nick Piggin)

 - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
   Piggin)

 - genksyms support for __builtin_va_list keyword

 - misc minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  x86/kbuild: enable modversions for symbols exported from asm
  kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
  scripts/kallsyms: remove last remnants of --page-offset option
  make use of make variable CURDIR instead of calling pwd
  kbuild: cmd_export_list: tighten the sed script
  kbuild: minor improvement for thin archives build
  kbuild: modpost warn if export version crc is missing
  kbuild: keep data tables through dead code elimination
  kbuild: improve linker compatibility with lib-ksyms.o build
  genksyms: Regenerate parser
  kbuild/genksyms: handle va_list type
  kbuild: thin archives for multi-y targets
  kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-17 16:24:13 -08:00
Uwe Kleine-König e19b7cee02 make use of make variable CURDIR instead of calling pwd
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11 12:12:56 +01:00
Jiri Slaby 69042bf200 objtool: Fix bytes check of lea's rex_prefix
For the "lea %(rsp), %rbp" case, we check if there is a rex_prefix.
But we check 'bytes' which is insn_byte_t[4] in rex_prefix (insn_field
structure). Therefore, the check is always true.

Instead, check 'nbytes' which is the right one.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161205105551.25917-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-06 09:20:59 +01:00
Josh Poimboeuf 56fb2d6eb6 objtool: Fix rare switch jump table pattern detection
The following commit:

  3732710ff6 ("objtool: Improve rare switch jump table pattern detection")

... improved objtool's ability to detect GCC switch statement jump
tables for GCC 6.  However the check to allow short jumps with the
scanned range of instructions wasn't quite right.  The pattern detection
should allow jumps to the indirect jump instruction itself.

This fixes the following warning:

  drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-27 08:20:27 +02:00
Josh Poimboeuf 9cfffb1168 objtool: Skip all "unreachable instruction" warnings for gcov kernels
Recently objtool has started reporting a few "unreachable instruction"
warnings when CONFIG_GCOV is enabled for newer versions of GCC.  Usually
this warning means there's some new control flow that objtool doesn't
understand.  But in this case, objtool is correct and the instructions
really are inaccessible.  It's an annoying quirk of gcov, but it's
harmless, so it's ok to just silence the warnings.

With older versions of GCC, it was relatively easy to detect
gcov-specific instructions and to skip any unreachable warnings produced
by them.  But GCC 6 has gotten craftier.

Instead of continuing to play whack-a-mole with gcov, just use a bigger,
more permanent hammer and disable unreachable warnings for the whole
file when gcov is enabled.  This is fine to do because a) unreachable
warnings are usually of questionable value; and b) gcov isn't used for
production kernels and we can relax the checks a bit there.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16 09:12:36 +02:00
Josh Poimboeuf 3732710ff6 objtool: Improve rare switch jump table pattern detection
GCC 6 added a new switch statement jump table optimization which makes
objtool's life harder.  It looks like:

  mov [rodata addr],%reg1
  ... some instructions ...
  jmpq *(%reg1,%reg2,8)

The optimization is quite rare, but objtool still needs to be able to
identify the pattern so that it can follow all possible control flow
paths related to the switch statement.

In order to detect the pattern, objtool starts from the indirect jump
and scans backwards through the function until it finds the first
instruction in the pattern.  If it encounters an unconditional jump
along the way, it stops and considers the pattern to be not found.

As it turns out, unconditional jumps can happen, as long as they are
small forward jumps within the range being scanned.

This fixes the following warnings:

  drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-16 09:12:35 +02:00
Josh Poimboeuf 2cc17fda94 objtool: Support '-mtune=atom' stack frame setup instruction
Arnd reported that enabling CONFIG_MATOM results in a bunch of objtool
false positive frame pointer warnings:

  arch/x86/events/intel/ds.o: warning: objtool: intel_pmu_pebs_del()+0x43: call without frame pointer save/setup
  security/keys/keyring.o: warning: objtool: keyring_read()+0x59: call without frame pointer save/setup
  kernel/signal.o: warning: objtool: __dequeue_signal()+0xd8: call without frame pointer save/setup
  ...

objtool gets confused by the fact that the '-mtune=atom' GCC option
sometimes uses 'lea (%rsp),%rbp' instead of 'mov %rsp,%rbp'.  The
instructions are effectively the same, but objtool doesn't know about
the 'lea' variant.

Fix the false warnings by adding support for 'lea (%rsp),%rbp' in the
objtool decoder.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-11 10:35:45 +02:00
Josh Poimboeuf c1fad9ef7e objtool: Add do_task_dead() to global noreturn list
objtool reports the following new warning:

  kernel/exit.o: warning: objtool: do_exit() falls through to next function complete_and_exit()

The warning is caused by do_exit()'s new call to do_task_dead(), which
is a new "noreturn" function which objtool doesn't know about yet,
introduced by:

  9af6528ee9 ("sched/core: Optimize __schedule()")

( objtool has to know all the global noreturn functions so it can follow
  the control flow of any functions which call them.  Unfortunately they
  need to be hard-coded because there's no automated way to detect them. )

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20160922212125.zbuewckqll4yur25@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-23 07:28:05 +02:00
Linus Torvalds 228ffba23e Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc fixes from Thomas Gleixner:
 "This update contains:

   - a fix for stomp-machine so the nmi_watchdog wont trigger on the cpu
     waiting for the others to execute the callback

   - various fixes and updates to objtool including an resync of the
     instruction decoder to match the kernel's decoder"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Un-capitalize "Warning" for out-of-sync instruction decoder
  objtool: Resync x86 instruction decoder with the kernel's
  objtool: Support new GCC 6 switch jump table pattern
  stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE
  objtool: Add 'fixdep' to objtool/.gitignore
2016-07-30 11:54:53 -07:00
Josh Poimboeuf 2af04ea545 objtool: Un-capitalize "Warning" for out-of-sync instruction decoder
Change "Warning" to "warning" to make it look more like a GCC warning.
Hopefully that will be enough to help the 0-day bot or other automated
tools catch this warning earlier before it ends up in Linus's tree.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b1669f391a5db91040427fd9f8e1e79db18f9709.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29 16:57:16 +02:00
Josh Poimboeuf 8d94c2f919 objtool: Resync x86 instruction decoder with the kernel's
This fixes the following warning:

  Warning: objtool: x86 instruction decoder differs from kernel

Unfortunately we have three identical copies of the x86 instruction
decoder in the kernel tree that have to be manually kept in sync.

It's on my TODO list to at least library-ize the ones in the tools
subdir so we'd only have two of them instead of three.  In the meantime,
here's another manual sync.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c61f4d5eba ("perf tools: Add AVX-512 support to the instruction decoder used by Intel PT")
Link: http://lkml.kernel.org/r/d7f74b4d91fed25b0be33cd5c86f5131fa1a7529.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29 16:57:16 +02:00
Josh Poimboeuf 6d01f28bc0 objtool: Support new GCC 6 switch jump table pattern
This fixes some false positive objtool warnings seen with gcc 6.1.1:

  kernel/trace/ring_buffer.o: warning: objtool: ring_buffer_read_page()+0x36c: sibling call from callable instruction with changed frame pointer
  arch/x86/kernel/reboot.o: warning: objtool: native_machine_emergency_restart()+0x139: sibling call from callable instruction with changed frame pointer
  lib/xz/xz_dec_stream.o: warning: objtool: xz_dec_run()+0xc2: sibling call from callable instruction with changed frame pointer

With GCC 6, a new code pattern is sometimes used to access a switch
statement jump table in .rodata, which objtool doesn't yet recognize:

  mov [rodata addr],%reg1
  ... some instructions ...
  jmpq *(%reg1,%reg2,8)

Add support for detecting that pattern.  The detection code is rather
crude, but it's still effective at weeding out false positives and
catching real warnings.  It can be refined later once objtool starts
reading DWARF CFI.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b8c9503b4ad8c8a827cc5400db4c1b40a3ea07bc.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29 16:56:21 +02:00
Linus Torvalds f0c98ebc57 libnvdimm for 4.8
1/ Replace pcommit with ADR / directed-flushing:
    The pcommit instruction, which has not shipped on any product, is
    deprecated. Instead, the requirement is that platforms implement either
    ADR, or provide one or more flush addresses per nvdimm. ADR
    (Asynchronous DRAM Refresh) flushes data in posted write buffers to the
    memory controller on a power-fail event. Flush addresses are defined in
    ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure:
    "Flush Hint Address Structure". A flush hint is an mmio address that
    when written and fenced assures that all previous posted writes
    targeting a given dimm have been flushed to media.
 
 2/ On-demand ARS (address range scrub):
    Linux uses the results of the ACPI ARS commands to track bad blocks
    in pmem devices.  When latent errors are detected we re-scrub the media
    to refresh the bad block list, userspace can also request a re-scrub at
    any time.
 
 3/ Support for the Microsoft DSM (device specific method) command format.
 
 4/ Support for EDK2/OVMF virtual disk device memory ranges.
 
 5/ Various fixes and cleanups across the subsystem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmXBsAAoJEB7SkWpmfYgCEwwP/1IOt9ocP+iHLMDH9KE7VaTZ
 NmUDR+Zy6g5cRQM7SgcuU5BXUcx+OsSrSrUTVF1cW994o9Gbz1mFotkv0ZAsPcYY
 ZVRQxo2oqHrssyOcg+PsgKWiXn68rJOCgmpEyzaJywl5qTMst7pzsT1s1f7rSh6h
 trCf4VaJJwxZR8fARGtlHUnnhPe2Orp99EZRKEWprAsIv2kPuWpPHSjRjuEgN1JG
 KW8AYwWqFTtiLRUk86I4KBB0wcDrfctsjgN9Ogd6+aHyQBRnVSr2U+vDCFkC8KLu
 qiDCpYp+yyxBjclnljz7tRRT3GtzfCUWd4v2KVWqgg2IaobUc0Lbukp/rmikUXQP
 WLikT2OCQ994eFK5OX3Q3cIU/4j459TQnof8q14yVSpjAKrNUXVSR5puN7Hxa+V7
 41wKrAsnsyY1oq+Yd/rMR8VfH7PHx3bFkrmRCGZCufLX1UQm4aYj+sWagDKiV3yA
 DiudghbOnhfurfGsnXUVw7y7GKs+gNWNBmB6ndAD6ZEHmKoGUhAEbJDLCc3DnANl
 b/2mv1MIdIcC1DlCmnbbcn6fv6bICe/r8poK3VrCK3UgOq/EOvKIWl7giP+k1JuC
 6DdVYhlNYIVFXUNSLFAwz8OkLu8byx7WDm36iEqrKHtPw+8qa/2bWVgOU6OBgpjV
 cN3edFVIdxvZeMgM5Ubq
 =xCBG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:

 - Replace pcommit with ADR / directed-flushing.

   The pcommit instruction, which has not shipped on any product, is
   deprecated.  Instead, the requirement is that platforms implement
   either ADR, or provide one or more flush addresses per nvdimm.

   ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers
   to the memory controller on a power-fail event.

   Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware
   Interface Table (NFIT) sub-structure: "Flush Hint Address Structure".
   A flush hint is an mmio address that when written and fenced assures
   that all previous posted writes targeting a given dimm have been
   flushed to media.

 - On-demand ARS (address range scrub).

   Linux uses the results of the ACPI ARS commands to track bad blocks
   in pmem devices.  When latent errors are detected we re-scrub the
   media to refresh the bad block list, userspace can also request a
   re-scrub at any time.

 - Support for the Microsoft DSM (device specific method) command
   format.

 - Support for EDK2/OVMF virtual disk device memory ranges.

 - Various fixes and cleanups across the subsystem.

* tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits)
  libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register"
  nfit: do an ARS scrub on hitting a latent media error
  nfit: move to nfit/ sub-directory
  nfit, libnvdimm: allow an ARS scrub to be triggered on demand
  libnvdimm: register nvdimm_bus devices with an nd_bus driver
  pmem: clarify a debug print in pmem_clear_poison
  x86/insn: remove pcommit
  Revert "KVM: x86: add pcommit support"
  nfit, tools/testing/nvdimm/: unify shutdown paths
  libnvdimm: move ->module to struct nvdimm_bus_descriptor
  nfit: cleanup acpi_nfit_init calling convention
  nfit: fix _FIT evaluation memory leak + use after free
  tools/testing/nvdimm: add manufacturing_{date|location} dimm properties
  tools/testing/nvdimm: add virtual ramdisk range
  acpi, nfit: treat virtual ramdisk SPA as pmem region
  pmem: kill __pmem address space
  pmem: kill wmb_pmem()
  libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes
  fs/dax: remove wmb_pmem()
  libnvdimm, pmem: flush posted-write queues on shutdown
  ...
2016-07-28 17:38:16 -07:00
Paul Gortmaker 5cada17426 objtool: Add 'fixdep' to objtool/.gitignore
To fix:

   Untracked files:
     (use "git add <file>..." to include in what will be committed)

           tools/objtool/fixdep

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a4571f6893caf737d05524cfa3829c2abc1fb240.1469452729.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-27 11:07:11 +02:00
Linus Torvalds 37e13a1ebe Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "This tree contains tooling fixes plus some additions:

   - fixes to the vdso2c build environment that Stephen Rothwell is
     using for the linux-next build (Arnaldo Carvalho de Melo)

   - AVX-512 instruction mappings (Adrian Hunter)

   - misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf tools: event.h needs asm/perf_regs.h"
  x86: Make the vdso2c compiler use the host architecture headers
  tools build: Fix objtool build with ARCH=x86_64
  objtool: Always use host headers
  objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
  tools build: Add HOSTARCH Makefile variable
  perf tests kmod-path: Fix build on ubuntu:16.04-x-armhf
  perf tools: Add AVX-512 instructions to the new instructions test
  perf tools: Add AVX-512 support to the instruction decoder used by Intel PT
  x86/insn: Add AVX-512 support to the instruction decoder
  x86/insn: perf tools: Fix vcvtph2ps instruction decoding
2016-07-26 10:26:29 -07:00
Linus Torvalds 7e4dc77b28 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "With over 300 commits it's been a busy cycle - with most of the work
  concentrated on the tooling side (as it should).

  The main kernel side enhancements were:

   - Add per event callchain limit: Recently we introduced a sysctl to
     tune the max-stack for all events for which callchains were
     requested:

       $ sysctl kernel.perf_event_max_stack
       kernel.perf_event_max_stack = 127

     Now this patch introduces a way to configure this per event, i.e.
     this becomes possible:

       $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

     allowing finer tuning of how much buffer space callchains use.

     This uses an u16 from the reserved space at the end, leaving
     another u16 for future use.

     There has been interest in even finer tuning, namely to control the
     max stack for kernel and userspace callchains separately.  Further
     discussion is needed, we may for instance use the remaining u16 for
     that and when it is present, assume that the sample_max_stack
     introduced in this patch applies for the kernel, and the u16 left
     is used for limiting the userspace callchain (Arnaldo Carvalho de
     Melo)

   - Optimize AUX event (hardware assisted side-band event) delivery
     (Kan Liang)

   - Rework Intel family name macro usage (this is partially x86 arch
     work) (Dave Hansen)

   - Refine and fix Intel LBR support (David Carrillo-Cisneros)

   - Add support for Intel 'TopDown' events (Andi Kleen)

   - Intel uncore PMU driver fixes and enhancements (Kan Liang)

   - ... other misc changes.

  Here's an incomplete list of the tooling enhancements (but there's
  much more, see the shortlog and the git log for details):

   - Support cross unwinding, i.e.  collecting '--call-graph dwarf'
     perf.data files in one machine and then doing analysis in another
     machine of a different hardware architecture.  This enables, for
     instance, to do:

       $ perf record -a --call-graph dwarf

     on a x86-32 or aarch64 system and then do 'perf report' on it on a
     x86_64 workstation (He Kuang)

   - Allow reading from a backward ring buffer (one setup via
     sys_perf_event_open() with perf_event_attr.write_backward = 1)
     (Wang Nan)

   - Finish merging initial SDT (Statically Defined Traces) support, see
     cset comments for details about how it all works (Masami Hiramatsu)

   - Support attaching eBPF programs to tracepoints (Wang Nan)

   - Add demangling of symbols in programs written in the Rust language
     (David Tolnay)

   - Add support for tracepoints in the python binding, including an
     example, that sets up and parses sched:sched_switch events,
     tools/perf/python/tracepoint.py (Jiri Olsa)

   - Introduce --stdio-color to set up the color output mode selection
     in 'annotate' and 'report', allowing emit color escape sequences
     when redirecting the output of these tools (Arnaldo Carvalho de
     Melo)

   - Add 'callindent' option to 'perf script -F', to indent the Intel PT
     call stack, making this output more ftrace-like (Adrian Hunter,
     Andi Kleen)

   - Allow dumping the object files generated by llvm when processing
     eBPF scriptlet events (Wang Nan)

   - Add stackcollapse.py script to help generating flame graphs (Paolo
     Bonzini)

   - Add --ldlat option to 'perf mem' to specify load latency for loads
     event (e.g. cpu/mem-loads/ ) (Jiri Olsa)

   - Tooling support for Intel TopDown counters, recently added to the
     kernel (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (303 commits)
  perf tests: Add is_printable_array test
  perf tools: Make is_printable_array global
  perf script python: Fix string vs byte array resolving
  perf probe: Warn unmatched function filter correctly
  perf cpu_map: Add more helpers
  perf stat: Balance opening and reading events
  tools: Copy linux/{hash,poison}.h and check for drift
  perf tools: Remove include/linux/list.h from perf's MANIFEST
  tools: Copy the bitops files accessed from the kernel and check for drift
  Remove: kernel unistd*h files from perf's MANIFEST, not used
  perf tools: Remove tools/perf/util/include/linux/const.h
  perf tools: Remove tools/perf/util/include/asm/byteorder.h
  perf tools: Add missing linux/compiler.h include to perf-sys.h
  perf jit: Remove some no-op error handling
  perf jit: Add missing curly braces
  objtool: Initialize variable to silence old compiler
  objtool: Add -I$(srctree)/tools/arch/$(ARCH)/include/uapi
  perf record: Add --tail-synthesize option
  perf session: Don't warn about out of order event if write_backward is used
  perf tools: Enable overwrite settings
  ...
2016-07-25 13:20:41 -07:00
Dan Williams fd1d961dd6 x86/insn: remove pcommit
The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-23 11:04:23 -07:00
Josh Poimboeuf 60cbdf5d05 tools build: Fix objtool build with ARCH=x86_64
The objtool build fails in a cross-compiled environment on a non-x86
host with "ARCH=x86_64":

  tools/objtool/objtool-in.o: In function `decode_instructions':
  tools/objtool/builtin-check.c:276: undefined reference to `arch_decode_instruction'

We could override the ARCH environment variable and change it back to
x86, similar to what the objtool Makefile was doing before; but it's
tricky to override environment variables consistently.

Instead, take a similar approach used by the Linux top-level Makefile
and introduce a SRCARCH Makefile variable which evaluates to "x86" when
ARCH is either "x86_64" or "x86".

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160722191920.ej62fnspnqurbaa7@treble
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:37:44 -03:00
Arnaldo Carvalho de Melo 0cf6eb603b objtool: Always use host headers
From a conversation with Josh:

From http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble :

It needs to be compiled with the host (powerpc) compiler, but then it
needs to disassemble target (x86) files.

 ----

So use HOSTARCH instead of ARCH.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160722034118.guckaniobf3f7czc@treble
Link: http://lkml.kernel.org/n/tip-le1m1yzxnfpt3msbblu40nm8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:28:46 -03:00
Arnaldo Carvalho de Melo 630e7a2904 objtool: Use tools/scripts/Makefile.arch to get ARCH and HOSTARCH
objtool's Makefile was setting up ARCH but fixing up just the x86_64 ->
x86, using Makefile.arch will do the necessary fixups for all arches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hbq0bbh03u2b722vozcyql31@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-22 16:28:25 -03:00
Arnaldo Carvalho de Melo b49364f36c objtool: Initialize variable to silence old compiler
gcc version 4.1.2 20080704 (Red Hat 4.1.2-55) barfs with:

    CC       /tmp/build/objtool/builtin-check.o
  cc1: warnings being treated as errors
  builtin-check.c: In function 'cmd_check':
  builtin-check.c:667: warning: 'prev_rela' may be used uninitialized in this function
  mv: cannot stat `/tmp/build/objtool/.builtin-check.o.tmp': No such file or directory
  make[1]: *** [/tmp/build/objtool/builtin-check.o] Error 1

Init it to NULL to silence it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qolo31rl2ojlwj1lj9dhemyz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-15 17:32:52 -03:00