Commit Graph

12 Commits

Author SHA1 Message Date
Tony Lindgren 055a1b8c99 Merge branch 'devel-misc' into omap-for-linus 2010-08-02 14:23:38 +03:00
Cory Maccarrone 8b8fbd39e2 omap1: omap7xx clocks, mux, serial fixes
This change adds in the necessary clocks and mux pins for UART
control on omap7xx devices.  I also made a change in the serial
code to only try and initialize two UARTs in omap_serial_init, as
these devices don't have three.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02 14:21:39 +03:00
Tony Lindgren c9d8230e31 omap: mux: Remove old mux code
All mach-omap2 omaps should now use the new mux code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-07-05 16:31:40 +03:00
Tony Lindgren 088ef950dc omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
Convert ARCH_OMAP24XX to ARCH_OMAP2

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15 09:27:01 -08:00
Cory Maccarrone c5c4dce45d omap1: Add 7xx clocks and pin muxes for SPI
Commit 35c9049b27 added
drivers/spi/omap_spi_100k.c.

This patch add the related clocks and pin muxing
entries to make the driver work on omap7xx platforms.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-08 10:29:05 -08:00
Cory Maccarrone bf92a40762 omap1: I2C mux and clocks for omap7xx
This change adds MUX pin configuration and clocks for I2C support
to OMAP 730 and 850-based devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Cory Maccarrone 106997c1a4 omap1: Add omap7xx USB support
This change implements USB client side support into the HTC
Herald board configuration.  It uses a similar, but updated
algorithm to initialize the USB as is used in the linwizard
project.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:34 -08:00
Tony Lindgren 15f45e6f27 omap: mux: Remove old mux code for 34xx
Remove old mux code for 34xx

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11 16:16:33 -08:00
Ajay Kumar Gupta e8e51d2920 omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E)
Added runtime programming for the differences in EHCI interface between
OMAP3EVM revisions (Rev >= E) and (Rev < E).

Changes:
	- EHCI PHY reset GPIO pin is 21 on Rev >= E while Rev < E
	  uses GPIO pin 135.
	- Rev >= E uses EHCI Vbus enable GPIO22 line.
	- Rev >= E uses GPIO61 to select EHCI port either on main board or
	  on Mistral Daughter Card (MDC). OMAP3EVM Rev < E doesn't have
	  EHCI port on main board.
	- Currently GPIO61 it programmed to enable EHCI port on main
	  board only.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
2009-11-22 10:24:33 -08:00
Madhu 4679232d3a omap3: HSMMC2 8-bit mux configuration
Add support for omap hsmmc2 8-bit mux configuration.

Signed-off-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Cory Maccarrone 490a566522 omap1: mmc: Add platform init for omap7xx
The MMC mux pins normally used by omap chips in devices.c
are different from what is needed by omap7xx chips.  This
change adds a conditional around the mux setup code to
enable the correct mux pins.

The omap730 and omap850 both use a different clock for the "fck"
clock of the MMC interface than other omap processors based on the
SOFT_REQ_REG, pin 12.  The "ick" clock is the same as that used
by other omap processors.

* Added the missing clock definition as mmc3_ck to clock.h
* Added the clock definition to omap_clks in clock.c
* Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c

With these changes, it is now possible to initialize and use MMC
cards with omap730 and omap850 devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
Tony Lindgren ce491cf854 omap: headers: Move remaining headers from include/mach to include/plat
Move the remaining headers under plat-omap/include/mach
to plat-omap/include/plat. Also search and replace the
files using these headers to include using the right path.

This was done with:

#!/bin/bash
mach_dir_old="arch/arm/plat-omap/include/mach"
plat_dir_new="arch/arm/plat-omap/include/plat"
headers=$(cd $mach_dir_old && ls *.h)
omap_dirs="arch/arm/*omap*/ \
drivers/video/omap \
sound/soc/omap"
other_files="drivers/leds/leds-ams-delta.c \
drivers/mfd/menelaus.c \
drivers/mfd/twl4030-core.c \
drivers/mtd/nand/ams-delta.c"

for header in $headers; do
	old="#include <mach\/$header"
	new="#include <plat\/$header"
	for dir in $omap_dirs; do
		find $dir -type f -name \*.[chS] | \
			xargs sed -i "s/$old/$new/"
	done
	find drivers/ -type f -name \*omap*.[chS] | \
		xargs sed -i "s/$old/$new/"
	for file in $other_files; do
		sed -i "s/$old/$new/" $file
	done
done

for header in $(ls $mach_dir_old/*.h); do
	git mv $header $plat_dir_new/
done

Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-10-20 09:40:47 -07:00