Commit Graph

32 Commits

Author SHA1 Message Date
Holger Brunck ed59b3eca0 powerpc/83xx: update kmeter1_defconfig
Synchronize this defconfig with latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-02-13 07:49:08 -06:00
Huang Shijie b8c4bf2610 defconfigs: remove CONFIG_MTD_NAND_VERIFY_WRITE
CONFIG_MTD_NAND_VERIFY_WRITE was killed recently, so remove it from
defconfigs as well.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-09-29 15:00:49 +01:00
Holger Brunck 7ee0bf5336 powerpc/83xx: update defconfig for kmeter1
Switch on UBIFS, HOTPLUG and TIPC and update the config to
the latest kernel version.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-07-10 07:07:20 -05:00
Scott Wood b637cf7bf8 powerpc/fsl: enable verbose bug output
This debug option has no overhead other than a slight increase in
kernel size, and makes bug reports more useful.  While some end users
may prefer to save the space, as a default on a kernel config aimed
primarily at development on reference boards, it should be enabled.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-05-19 01:14:30 -05:00
Holger Brunck 93e2b95c81 powerpc/83xx: rename and update kmeter1
Beside the MPC 8360 based board kmeter1 other km83xx boards
from keymile will follow. Therefore the board specific naming
kmeter1 for functions and files were replaced with km83xx.
Additionally some updates were made:
    - update defconfig for 2.6.38
    - rework flash partitioning in dts file
    - add gpio controller for qe_pio_c in dts

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-03-15 10:06:37 -05:00
David Rientjes 6a108a14fa kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option
is used to configure any non-standard kernel with a much larger scope than
only small devices.

This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes
references to the option throughout the kernel.  A new CONFIG_EMBEDDED
option is added that automatically selects CONFIG_EXPERT when enabled and
can be used in the future to isolate options that should only be
considered for embedded systems (RISC architectures, SLOB, etc).

Calling the option "EXPERT" more accurately represents its intention: only
expert users who understand the impact of the configuration changes they
are making should enable it.

Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Greg KH <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:05 -08:00
Benjamin Herrenschmidt 61a3e1665f powerpc: Trim defconfigs
This trims all our defconfigs using make savedefconfig

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-09 11:19:16 +10:00
Kumar Gala b4d0a038e0 powerpc: 2.6.34 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:17:27 -05:00
Kim Phillips e3c8a02743 powerpc/mpc8xxx defconfigs - turn off SYSFS_DEPRECATED
a recent fc11 udev update on an 83xx board made root console login
disappear:

  Updating       : udev-141-8.fc11.ppc                                    32/83
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED;
	some udev features will not work correctly

and sure enough, turning off SYSFS_DEPRECATED brings the login prompt back.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:15:06 -05:00
Kim Phillips f5b0959fec powerpc/83xx: enable EPOLL syscall in defconfig
83xx users looking to run apache will experience this error:

/var/log/apache2/error.log:
[emerg] (38)Function not implemented: Couldn't create pollset in child; check system or user limits

enabling CONFIG_EPOLL in kernel config fixes this so apache can run.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-04-19 23:13:23 -05:00
Kumar Gala 1e65346b3b powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-06 09:27:07 -06:00
Kumar Gala e9bcf1418c powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Updated mpc85xx_{smp_}defconfig to enable:
* XES_MPC85xx board
* PCI MSI
* RapidIO

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 08:26:38 -06:00
Paul Gortmaker 944ac03804 powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage
With flash partition entries in the DTS file, MTD might as well
be enabled in the defconfig.  In a similar vein, enable USB and
enough related options (SCSI/ext2/ext3) so that a user can read
and write to a generic USB flash drive as well.

Also, this board only has the two default SOC UARTs, so adjust the
UART config accordingly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:11 -05:00
Kumar Gala 34466c5be4 powerpc: Update defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:34:01 -05:00
Heiko Schocher 8159df72d4 83xx: add support for the kmeter1 board.
The following series implements basic board support for
the kmeter1 board from keymile, based on a MPC8360.

This series provides the following functionality:

- The board can boot with a serial console on UART1
- Ethernet:
    UCC1 in RGMII mode
    UCC2 in RGMII mode
    UCC4 in RMII mode
    UCC5 in RMII mode
    UCC6 in RMII mode
    UCC7 in RMII mode
    UCC8 in RMII mode

    following patch is necessary for working UCC in RMII mode:

    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html

- Flash accessed via MTD layer

  On this hardware there is an Intel P30 flash, following patch
  series is necessary for working with this hardware:

  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html

- I2C using I2C Bus 1 from the MPC8360 cpu

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:09 -05:00
Kumar Gala fa0b5596a6 powerpc/83xx: Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-13 17:24:24 -05:00
Anton Vorontsov e85477f516 powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).

This patch fixes following failure during bootup:

mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:38:57 -06:00
Benjamin Herrenschmidt 0411648e44 Merge commit 'kumar/kumar-merge' into merge 2009-01-28 17:14:54 +11:00
Kumar Gala 47b193a1aa powerpc/83xx: Update defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-01-26 20:00:18 -06:00
Jean Delvare dd7f8dbe2b eeprom: More consistent symbol names
Now that all EEPROM drivers live in the same place, let's harmonize
their symbol names.

Also fix eeprom's dependencies, it definitely needs sysfs, and is no
longer experimental after many years in the kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-26 21:19:57 +01:00
Anton Vorontsov b2c2717bae powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigs
This is needed so that Vitesse 7385 5-port switch could work on
MPC8349E-mITX boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-04 18:47:09 -06:00
Kumar Gala ea37194d68 powerpc: Updated Freescale PPC related defconfigs
unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable
ISDN drivers which seem to be the only place we are using pci_find_device

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-11-08 12:40:54 -06:00
Timur Tabi dbe216319f powerpc: disable CHRP and PMAC support in various defconfigs
Because CHRP and PMAC are by default enabled, several non-CHRP and non-PMAC
PowerPC defconfigs will have these Kconfig options set erroneously.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-10-13 11:09:59 -05:00
Timur Tabi 3396c72b92 powerpc: Remove CHRP and PMAC support from FSL defconfigs
Fix various defconfigs for Freescale chip based boards to remove
CONFIG_PPC_PMAC or CONFIG_PPC_CHRP which crept in due to those
being default y

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-07 14:26:20 +11:00
Anton Vorontsov 307db95882 powerpc/83xx: mpc836x_mds: add support for the nor flash
This patch adds the localbus node, moves the bcsr node into the
localbus node, and adds the flash node.

Also enable MTD support in the defconfig.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-16 10:01:34 -05:00
Kumar Gala 2bb2e1db90 powerpc: Update defconfigs for FSL PPC boards
Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-21 07:23:03 -05:00
Paul Mackerras e9a4b6a3f6 Merge branch 'linux-2.6' 2008-06-30 10:16:50 +10:00
Anton Vorontsov b13e930906 powerpc/83xx: new board support: MPC8360E-RDK
This is patch adds board file, device tree, and defconfig for the new
board, made by Freescale Semiconductor Inc. and Logic Product Development.

Currently supported:
1. UEC{1,2,7,4};
2. I2C;
3. SPI;
4. NS16550 serial;
5. PCI and miniPCI;
6. Intel NOR StrataFlash X16 64Mbit PC28F640P30T85;
7. Graphics controller, Fujitsu MB86277.

Not supported in this patch:
1. StMICRO NAND512W3A2BN6E, 512 Mbit (supported with FSL UPM NAND driver);
2. FHCI USB (supported with FHCI driver).
3. QE Serial UCCs (tested to not work with ucc_uart driver, reason
   unknown, yet);
4. ADC AD7843 (tested to work, but support via device tree depends on
   major SPI rework, GPIO API, etc);

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 11:11:17 -05:00
Anton Vorontsov f17c63231c [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus
MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate
fixed-link property in the device tree.

If not, ethernet will not work:
  e0024520:03 not found
  eth1: Could not attach to PHY
  IP-Config: Failed to open eth1

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10 09:19:26 -05:00
Kumar Gala 70b3ec3e52 [POWERPC] Updated Freescale PPC defconfigs
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-09 09:12:22 -05:00
Scott Wood 1e31de7aae [POWERPC] 83xx: mpc8313erdb - Enable FCM NAND and OF partitions in defconfig
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:40 -05:00
Kumar Gala 370131c3f2 [POWERPC] 83xx/85xx: Reorganize defconfigs
Board specific defconfigs are useful, however with the ability to do
multi-board defconfigs they aren't needed in the top level configs directory

Move the 83xx/85xx board specific defconfigs to individual directories under
arch/powerpc/configs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17 01:01:36 -05:00