Mark the client as expired under the client_lock so it won't be renewed
when an nfsv4.1 session is done, after it was explicitly expired
during processing of the compound.
Do not renew a client mark as expired (in particular, it is not
on the lru list anymore)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Currently just initialize the cl_refcount to 1
and decrement in expire_client(), conditionally freeing the
client when the refcount reaches 0.
To be used later by nfsv4.1 compounds to keep the client from
timing out while in use.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Separate out unhashing of the client and session.
To be used later by the laundromat.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
To be used later on to hold a reference count on the client while in use by a
nfsv4.1 compound.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
and grab the client lock once for all the client's sessions.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In preparation to share the lock's scope to both client
and session hash tables.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
It's legal to send a DESTROY_SESSION outside any session (as the only
operation in a compound), in which case cstate->session will be NULL;
check for that case.
While we're at it, move these checks into a separate helper function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
In the replay case, the
renew_client(session->se_client);
happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.
Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Benny Halevy <bhalevy@panasas.com>
Enforce the rules about compound op ordering.
Motivated by implementing RECLAIM_COMPLETE, for which the client is
implicit in the current session, so it is important to ensure a
succesful SEQUENCE proceeds the RECLAIM_COMPLETE.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The rfc allows a client to change the callback parameters, but we didn't
previously implement it.
Teach the callbacks to rerun themselves (by placing themselves on a
workqueue) when they recognize that their rpc task has been killed and
that the callback connection has changed.
Then we can change the callback connection by setting up a new rpc
client, modifying the nfs4 client to point at it, waiting for any work
in progress to complete, and then shutting down the old client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that the shutdown sequence guarantees callbacks are shut down before
the client is destroyed, we no longer have a use for cl_count.
We'll probably reinstate a reference count on the client some day, but
it will be held by users other than callbacks.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The NFSv4 server's fl_break callback can sleep (dropping the BKL), in
order to allocate a new rpc task to send a recall to the client.
As far as I can tell this doesn't cause any races in the current code,
but the analysis is difficult. Also, the sleep here may complicate the
move away from the BKL.
So, just schedule some work to do the job for us instead. The work will
later also prove useful for restarting a call after the callback
information is changed.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Once we've expired the client, there's no further purpose to the
callbacks; go ahead and shut down the callback client rather than
waiting for the last reference to go.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
The original code here assumed we'd allow the user to change the lease
any time, but only allow the change to take effect on restart. Since
then we modified the code to allow setting the lease on when the server
is down. Update the rest of the code to reflect that fact, clarify
variable names, and add document.
Also, the code insisted that the grace period always be the longer of
the old and new lease periods, but that's overly conservative--as long
as it lasts at least the old lease period, old clients should still know
to recover in time.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Instead of accessing the lease time directly, some users call
nfs4_lease_time(), and some a macro, NFSD_LEASE_TIME, defined as
nfs4_lease_time(). Neither layer of indirection serves any purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
nfsd4: fix minor memory leak
svcrpc: treat uid's as unsigned
nfsd: ensure sockets are closed on error
Revert "sunrpc: move the close processing after do recvfrom method"
Revert "sunrpc: fix peername failed on closed listener"
sunrpc: remove unnecessary svc_xprt_put
NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
xfs_export_operations.commit_metadata
commit_metadata export operation replacing nfsd_sync_dir
lockd: don't clear sm_monitored on nsm_reboot_lookup
lockd: release reference to nsm_handle in nlm_host_rebooted
nfsd: Use vfs_fsync_range() in nfsd_commit
NFSD: Create PF_INET6 listener in write_ports
SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
NFSD: Support AF_INET6 in svc_addsock() function
SUNRPC: Use rpc_pton() in ip_map_parse()
nfsd: 4.1 has an rfc number
nfsd41: Create the recovery entry for the NFSv4.1 client
nfsd: use vfs_fsync for non-directories
...
We'll introduce FMODE_RANDOM which will be runtime modified. So protect
all runtime modification to f_mode with f_lock to avoid races.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@kernel.org> [2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The new .h files have paths at the top that are now out of date. While
we're here, just remove all of those from fs/nfsd; they never served any
purpose.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Lots of include/linux/nfsd/* headers are only used by
nfsd module. Move them to the source directory
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Now that the headers are fixed and carry their own wait, all fs/nfsd/
source files can include a minimal set of headers. and still compile just
fine.
This patch should improve the compilation speed of the nfsd module.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
None of this stuff is used outside nfsd, so move it out of the common
linux include directory.
Actually, probably none of the stuff in include/linux/nfsd/nfsd.h really
belongs there, so later we may remove that file entirely.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
We do the same calculation in a couple places; use a helper function,
and add a little documentation, in the hopes of preventing bugs like
that fixed in the last patch.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Unbalanced calculations on creation and destruction of sessions could
cause our estimate of cache memory used to become negative, sometimes
resulting in spurious SERVERFAULT returns to client CREATE_SESSION
requests.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
ca_maxresponsesize and ca_maxrequest size include the RPC header.
sv_max_mesg is sv_max_payolad plus a page for overhead and is used in
svc_init_buffer to allocate server buffer space for both the request and reply.
Note that this means we can service an RPC compound that requires
ca_maxrequestsize (MAXWRITE) or ca_max_responsesize (MAXREAD) but that we do
not support an RPC compound that requires both ca_maxrequestsize and
ca_maxresponsesize.
Signed-off-by: Andy Adamson <andros@netapp.com>
[bfields@citi.umich.edu: more documentation updates]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* 'for-2.6.32' of git://linux-nfs.org/~bfields/linux: (68 commits)
nfsd4: nfsv4 clients should cross mountpoints
nfsd: revise 4.1 status documentation
sunrpc/cache: avoid variable over-loading in cache_defer_req
sunrpc/cache: use list_del_init for the list_head entries in cache_deferred_req
nfsd: return success for non-NFS4 nfs4_state_start
nfsd41: Refactor create_client()
nfsd41: modify nfsd4.1 backchannel to use new xprt class
nfsd41: Backchannel: Implement cb_recall over NFSv4.1
nfsd41: Backchannel: cb_sequence callback
nfsd41: Backchannel: Setup sequence information
nfsd41: Backchannel: Server backchannel RPC wait queue
nfsd41: Backchannel: Add sequence arguments to callback RPC arguments
nfsd41: Backchannel: callback infrastructure
nfsd4: use common rpc_cred for all callbacks
nfsd4: allow nfs4 state startup to fail
SUNRPC: Defer the auth_gss upcall when the RPC call is asynchronous
nfsd4: fix null dereference creating nfsv4 callback client
nfsd4: fix whitespace in NFSPROC4_CLNT_CB_NULL definition
nfsd41: sunrpc: add new xprt class for nfsv4.1 backchannel
sunrpc/cache: simplify cache_fresh_locked and cache_fresh_unlocked.
...
Move common initialization of 'struct nfs4_client' inside create_client().
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[nfsd41: Remember the auth flavor to use for callbacks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Follows the model used by the NFS client. Setup the RPC prepare and done
function pointers so that we can populate the sequence information if
minorversion == 1. rpc_run_task() is then invoked directly just like
existing NFS client operations do.
nfsd4_cb_prepare() determines if the sequence information needs to be setup.
If the slot is in use, it adds itself to the wait queue.
nfsd4_cb_done() wakes anyone sleeping on the callback channel wait queue
after our RPC reply has been received. It also sets the task message
result pointer to NULL to clearly indicate we're done using it.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[define and initialize cl_cb_seq_nr here]
[pulled out unused defintion of nfsd4_cb_done]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
RPC callback requests will wait on this wait queue if the backchannel
is out of slots.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Keep the xprt used for create_session in cl_cb_xprt.
Mark cl_callback.cb_minorversion = 1 and remember
the client provided cl_callback.cb_prog rpc program number.
Use it to probe the callback path.
Use the client's network address to initialize as the
callback's address as expected by the xprt creation
routines.
Define xdr sizes and code nfs4_cb_compound header to be able
to send a null callback rpc.
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
[get callback minorversion from fore channel's]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: change bc_sock to bc_xprt]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[pulled definition for cl_cb_xprt]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: set up backchannel's cb_addr]
[moved rpc_create_args init to "nfsd: modify nfsd4.1 backchannel to use new xprt class"]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Callbacks are always made using the machine's identity, so we can use a
single auth_generic credential shared among callbacks to all clients and
let the rpc code take care of the rest.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Use NFSD_SLOT_CACHE_SIZE size buffers for sessions DRC instead of holding nfsd
pages in cache.
Connectathon testing has shown that 1024 bytes for encoded compound operation
responses past the sequence operation is sufficient, 512 bytes is a little too
small. Set NFSD_SLOT_CACHE_SIZE to 1024.
Allocate memory for the session DRC in the CREATE_SESSION operation
to guarantee that the memory resource is available for caching responses.
Allocate each slot individually in preparation for slot table size negotiation.
Remove struct nfsd4_cache_entry and helper functions for the old page-based
DRC.
The iov_len calculation in nfs4svc_encode_compoundres is now always
correct. Replay is now done in nfsd4_sequence under the state lock, so
the session ref count is only bumped on non-replay. Clean up the
nfs4svc_encode_compoundres session logic.
The nfsd4_compound_state statp pointer is also not used.
Remove nfsd4_set_statp().
Move useful nfsd4_cache_entry fields into nfsd4_slot.
Signed-off-by: Andy Adamson <andros@netapp.com
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
nfserr_resource is not a legal error for NFSv4.1. Replace it with
nfserr_serverfault for EXCHANGE_ID and CREATE_SESSION processing.
We will also need to map nfserr_resource to other errors in routines shared
by NFSv4.0 and NFSv4.1
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
This fixes a bug in the sequence operation reply.
The sequence operation returns the highest slotid it will accept in the future
in sr_highest_slotid, and the highest slotid it prefers the client to use.
Since we do not re-negotiate the session slot table yet, these should both
always be set to the session ca_maxrequests.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound
a forechannel drc request size, clients can tailor a session to usage.
For example, an I/O session (READ/WRITE only) can have a much smaller
ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger
ca_maxresponses to service a large in-flight data window.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Compounds consisting of only a sequence operation don't need any
additional caching beyond the sequence information we store in the slot
entry. Fix nfsd4_is_solo_sequence to identify this case correctly.
The additional check for a failed sequence in nfsd4_store_cache_entry()
is redundant, since the nfsd4_is_solo_sequence call lower down catches
this case.
The final ce_cachethis set in nfsd4_sequence is also redundant.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Until we work out the state locking so we can use a spin lock to protect
the cl_lru, we need to take the state_lock to renew the client.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: Do not renew state on error]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfsd41: Simplify exit code]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
When a SETCLIENTID call comes in, one of the args given is the svc_rqst.
This struct contains an rq_addr field which holds the address that sent
the call. If this is an IPv6 address, then we can use the sin6_scope_id
field in this address to populate the sin6_scope_id field in the
callback address.
AFAICT, the rq_addr.sin6_scope_id is non-zero if and only if the client
mounted the server's link-local address.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Benny Halevy
J. Bruce Fields
Tejun Heo
Linus Torvalds
Wu Fengguang
Ricardo Labiaga
Boaz Harrosh
Andy Adamson
Alexey Dobriyan
Jeff Layton