Commit Graph

526 Commits

Author SHA1 Message Date
Robert Dolca f11631748e NFC: nci: non-static functions can not be inline
This fixes a build error that seems to be toochain
dependent (Not seen with gcc v5.1):

In file included from net/nfc/nci/rsp.c:36:0:
net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’:
include/net/nfc/nci_core.h:355:12: error: inlining failed in call to
always_inline ‘nci_prop_rsp_packet’: function body not available
 inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode,

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-28 06:44:45 +01:00
Vincent Cuissard 2bd832459a NFC: NCI: allow spi driver to choose transfer clock
In some cases low level drivers might want to update the
SPI transfer clock (e.g. during firmware download).

This patch adds this support. Without any modification the
driver will use the default SPI clock (from pdata or device tree).

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 04:23:34 +01:00
Vincent Cuissard fcd9d046fd NFC: NCI: move generic spi driver to a module
SPI driver should be a module.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 04:21:38 +01:00
Vincent Cuissard e5629d2947 NFC: NCI: export nci_send_frame and nci_send_cmd function
Export nci_send_frame and nci_send_cmd symbols to allow drivers
to use it. This is needed for example if NCI is used during
firmware download phase.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 04:16:14 +01:00
Christophe Ricard 15d17170b4 NFC: st21nfca: Add support for proprietary commands
Add support for proprietary commands useful mainly
for factory testings.

Here is a list:

- FACTORY_MODE: Allow to set the driver into a mode where no
  secure element are activated. It does not consider any
  NFC_ATTR_VENDOR_DATA.
- HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes
  command. It does not consider any NFC_ATTR_VENDOR_DATA.
- HCI_DM_PUT_DATA: Allow to configure specific CLF registry as
  for example RF trimmings or low level drivers configurations
  (I2C, SPI, SWP).
- HCI_DM_UPDATE_AID: Allow to configure an AID routing into the
  CLF routing table following RF technology, CLF mode or protocol.
- HCI_DM_GET_INFO: Allow to retrieve CLF information.
- HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as
  low level drivers configurations or RF trimmings.
- HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete
  packet can be more than 8KB.
- HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
  configuration changes without CLF power off.
- HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example
  the white list).
- HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
  technology. When using this command to anti-collision is done.
- HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF
  connectivity.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 04:00:24 +01:00
Christophe Ricard 064d004796 NFC: st-nci: Add few code style fixes
Add some few code style fixes.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 03:55:13 +01:00
Christophe Ricard 96d4581f0b NFC: netlink: Add mode parameter to deactivate_target functions
In order to manage in a better way the nci poll mode state machine,
add mode parameter to deactivate_target functions.
This way we can manage different target state.
mode parameter make sense only in nci core.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 03:55:12 +01:00
Christophe Ricard a1b0b94158 NFC: nci: Create pipe on specific gate in nci_hci_connect_gate
Some gates might need to have their pipes explicitly created.
Add a call to nci_hci_create_pipe in nci_hci_connect_gate for
every gate that is different than NCI_HCI_LINK_MGMT_GATE or
NCI_HCI_ADMIN_GATE.

In case of an error when opening a pipe, like in hci layer,
delete the pipe if it was created.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:13 +01:00
Christophe Ricard 8a49943f5b NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.
When session_id is filled to 0xff, the pipe configuration is
probably incorrect and needs to be cleared.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:13 +01:00
Christophe Ricard fa6fbadea5 NFC: nci: add nci_hci_clear_all_pipes functions
nci_hci_clear_all_pipes might be use full in some cases
for example after a firmware update.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:12 +01:00
Christophe Ricard e65917b6d5 NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPE
When receiving data in nci_hci_msg_rx_work, extract pipe
value using NCI_HCP_MSG_GET_PIPE macro.

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:12 +01:00
Christophe Ricard d8cd37ed2f NFC: nci: Fix improper management of HCI return code
When sending HCI data over NCI, HCI return code is part
of the NCI data. In order to get correctly the HCI return
code, we assume the NCI communication is successful and
extract the return code for the nci_hci functions return code.

This is done because nci_to_errno does not match hci return
code value.

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:12 +01:00
Christophe Ricard 500c4ef022 NFC: nci: Fix incorrect data chaining when sending data
When sending HCI data over NCI, cmd information should be
present only on the first packet.
Each packet shall be specifically allocated and sent to the
NCI layer.

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26 06:53:11 +01:00
Robert Dolca 85b9ce9a21 NFC: nci: add nci_get_conn_info_by_id function
This functin takes as a parameter a pointer to the nci_dev
struct and the first byte from the values of the first domain
specific parameter that was used for the connection creation.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 20:29:11 +01:00
Robert Dolca caa575a86e NFC: nci: fix possible crash in nci_core_conn_create
If the number of destination speific parameters supplied is 0
the call will fail. If the first destination specific parameter
does not have a value, curr_id will be set to 0.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 20:29:05 +01:00
Robert Dolca 22e4bd09c4 NFC: nci: rename nci_prop_ops to nci_driver_ops
Initially it was used to create hooks in the driver for
proprietary operations. Currently it is being used for hooks
for both proprietary and generic operations.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 20:28:59 +01:00
Robert Dolca 0a97a3cba2 NFC: nci: Allow the driver to set handler for core nci ops
The driver may be required to act when some responses or
notifications arrive. For example the NCI core does not have a
handler for NCI_OP_CORE_GET_CONFIG_RSP. The NFCC can send a
config response that has to be read by the driver and the packet
may contain vendor specific data.

The Fields Peak driver needs to take certain actions when a reset
notification arrives (packet also not handled by the nfc core).

The driver handlers do not interfere with the core and they are
called after the core processes the packet.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 19:12:57 +01:00
Robert Dolca 7bc4824ed5 NFC: nci: Introduce nci_core_cmd
This allows sending core commands from the driver. The driver
should be able to send NCI core commands like CORE_GET_CONFIG_CMD.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 19:12:13 +01:00
Robert Dolca e4dbd62528 NFC: nci: Do not call post_setup when setup fails
The driver should know that it can continue with post setup where
setup left off. Being able to execute post_setup when setup fails
may force the developer to keep this state in the driver.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 19:11:58 +01:00
Robert Dolca 2663589ce6 NFC: nci: Add function to get max packet size for conn
FDP driver needs to send the firmware as regular packets
(not fragmented). The driver should have a way to
get the max packet size for a given connection.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 19:11:42 +01:00
Robert Dolca ea785c094d NFC: nci: Export nci data send API
For the firmware update the driver may use nci_send_data.

Signed-off-by: Robert Dolca <robert.dolca@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25 19:11:35 +01:00
Julia Lawall 9abebb8a10 NFC: delete null dereference
The exit label performs device_unlock(&dev->dev);, which will fail when dev
is NULL, and nfc_put_device(dev);, which is not useful when dev is NULL, so
just exit the function immediately.

Problem found using scripts/coccinelle/null/deref_null.cocci

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-19 20:10:37 +02:00
Samuel Ortiz 21d19f87d4 NFC: nci: Use __nci_request for exported routines
Since we do not know in which context drivers will call these
routines, they should use the unlocked version of nci_request,
i.e. __nci_request.
It is up to drivers to know/decide if they need to take the
req_lock mutex before calling those routines. When being called
from the NCI setup routine there is no need to do so as ops->setup
is called under req_lock.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-03 05:18:55 +02:00
Christophe Ricard 29e76924cf nfc: netlink: Add capability to reply to vendor_cmd with data
A proprietary vendor command may send back useful data to the user
application.

For example, the field level applied on the NFC router antenna.

Still based on net/wireless/nl80211.c implementation,
add nfc_vendor_cmd_alloc_reply_skb and nfc_vendor_cmd_reply in
order to send back over netlink data generated by a proprietary
command.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20 22:00:11 +02:00
Christophe Ricard 5a9e0ffc0f nfc: nci: hci: Add check on skb nci_hci_send_cmd parameter
skb can be NULL and may lead to a NULL pointer error.

Add a check condition before setting HCI rx buffer.

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20 21:56:36 +02:00
Robert Baldyga 025a0cb838 NFC: nci: export nci_core_reset and nci_core_init
Some drivers needs to have ability to reinit NCI core, for example
after updating firmware in setup() of post_setup() callback. This
patch makes nci_core_reset() and nci_core_init() functions public,
to make it possible.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20 21:23:11 +02:00
Robert Baldyga fdf79bd488 NFC: nci: Add post_setup handler
Some drivers require non-standard configuration after NCI_CORE_INIT
request, because they need to know ndev->manufact_specific_info or
ndev->manufact_id. This patch adds post_setup handler allowing to do
such custom configuration.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20 21:22:34 +02:00
Christophe Ricard adca3c38d8 nfc: netlink: Warning fix
When NFC_ATTR_VENDOR_DATA is not set, data_len is 0 and data is NULL.

Fixes the following warning:

net/nfc/netlink.c:1536:3: warning: 'data' may be used uninitialized
+in this function [-Wmaybe-uninitialized]
      return cmd->doit(dev, data, data_len);

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17 10:45:19 +02:00
Christophe Ricard fe202fe955 nfc: netlink: Add check on NFC_ATTR_VENDOR_DATA
NFC_ATTR_VENDOR_DATA is an optional vendor_cmd argument.
The current code was potentially using a non existing argument
leading to potential catastrophic results.

Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-17 01:36:17 +02:00
Vincent Cuissard fb77ff4f43 NFC: nci: fix mistake in uart generic driver
It was not possible to register a UART driver due
to a bad condition.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-15 18:10:37 +02:00
Vincent Cuissard 34ac496641 NFC: nci: remove current SLEEP mode management
NCI deactivate management was modified to support all NCI
deactivation type. Problem is that all the API are not ready
yet for it.

Problem is that with current code, when neard asks to deactivate
the tag it sends a deactivate SLEEP but nobody will then send a
IDLE deactivate. This IDLE deactivate is mandatory since NFC
controller can only be unlocked by DH.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-13 00:08:09 +02:00
Vincent Cuissard e097dc624f NFC: nfcmrvl: add UART driver
Add support of Marvell NFC chip controlled over UART

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11 23:41:57 +02:00
Vincent Cuissard 9961127d4b NFC: nci: add generic uart support
Some NFC controller supports UART as host interface.
As with SPI, a lot of code can be shared between vendor
drivers. This patch add the generic support of UART and
provides some extension API for vendor specific needs.

This code is strongly inspired by the Bluetooth HCI ldisc
implementation. NCI UART vendor drivers will have to register
themselves to this layer via nci_uart_register.

Underlying tty will have to be configured from user land
thanks to an ioctl.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-11 23:37:37 +02:00
Samuel Ortiz 2df7f8c695 NFC: nci: Export nci_req_complete
Drivers implementing proprietary ops may need it now.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10 12:50:22 +02:00
Samuel Ortiz 9e58095f96 NFC: netlink: Implement vendor command support
Vendor commands are passed from userspace through the
NFC_CMD_VENDOR netlink command, allowing driver and hardware
specific operations implementations like for example RF tuning
or production line calibration.

Drivers will associate a set of vendor commands to a vendor
id, which could typically be an OUI. The netlink kernel
implementation will try to match the received vendor id
and sub command attributes with the registered ones. When
such match is found, the driver defined sub command routine
is called.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 01:21:35 +02:00
Christophe Ricard 0e70cba71f NFC: nci: Move close ops call in nci_close_device
When closing the device some data (proprietary commands)
might be sent. The core state machine needs to be set for
correct command execution.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:24 +02:00
Christophe Ricard 759afb8d28 NFC: nci: Add nci_prop_cmd allowing to send proprietary nci cmd
Handle allowing to send proprietary nci commands anywhere in the nci
state machine.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:21 +02:00
Christophe Ricard c39daeee50 NFC: nci: Add nci init ops for early device initialization
Some device may need to execute some proprietary commands
in order to "wake-up"; Before the nci state initialization.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:21 +02:00
Christophe Ricard 81859ab877 NFC: nci: Add NCI_RESET return code check before setup
setup was executed in any case, even if NCI_RESET failed.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:20 +02:00
Samuel Ortiz b6355e972a NFC: nci: Handle proprietary response and notifications
Allow for drivers to explicitly define handlers for each
proprietary notifications and responses they expect to support.

Reviewed-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:20 +02:00
Joe Perches 2622e2a03c NFC: nci: hci: Fix releasing uninitialized skbs
Several of these goto exit; uses should be direct returns
as skb is not yet initialized by nci_hci_get_param().

Miscellanea:

o Use !memcmp instead of memcmp() == 0
o Remove unnecessary goto from if () {... goto exit;} else {...} exit:

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09 00:34:19 +02:00
Eric W. Biederman 11aa9c28b4 net: Pass kern from net_proto_family.create to sk_alloc
In preparation for changing how struct net is refcounted
on kernel sockets pass the knowledge that we are creating
a kernel socket from sock_create_kern through to sk_alloc.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:50:17 -04:00
Richard Weinberger 65bc4f936e nfc: Fix portid type in urelease_work
portid is an unsigned integer. Fix urelease_work to
match all other portid user in the kernel.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13 16:35:16 -04:00
Clément Perrochaud 25af01ed18 NFC: nci: Add firmware download support
A simple forward for firmware download (i.e. sending a new firmware
to the NFC adapter) from the NFC subsystem to the drivers.

This feature is required to update the firmware of NXP-NCI NFC
controllers but can be used by any NCI driver.

This feature has been present in the HCI subsystem since 9a695d.

Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26 10:56:20 +01:00
Ying Xue 1b78414047 net: Remove iocb argument from sendmsg and recvmsg
After TIPC doesn't depend on iocb argument in its internal
implementations of sendmsg() and recvmsg() hooks defined in proto
structure, no any user is using iocb argument in them at all now.
Then we can drop the redundant iocb argument completely from kinds of
implementations of both sendmsg() and recvmsg() in the entire
networking stack.

Cc: Christoph Hellwig <hch@lst.de>
Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02 13:06:31 -05:00
Christophe Ricard fa00e8fed4 NFC: nci: Move NFCEE discovery logic
NFCEE_DISCOVER_CMD is a specified NCI command used to discover
NFCEE IDs.
Move nci_nfcee_discover() call to nci_discover_se() in order to
guarantee:
- NFCEE_DISCOVER_CMD run when the NCI state machine is initialized
- NFCEE_DISCOVER_CMD is not run in case there is not discover_se
  hook defined by a NFC device driver.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04 09:15:18 +01:00
Christophe Ricard 15d4a8da0e NFC: nci: Move logical connection structure allocation
conn_info is currently allocated only after nfcee_discovery_ntf
which is not generic enough for logical connection other than
NFCEE. The corresponding conn_info is now created in
nci_core_conn_create_rsp().

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04 09:14:09 +01:00
Christophe Ricard 3ba5c8466b NFC: nci: Change credits field to credits_cnt
For consistency sake change nci_core_conn_create_rsp structure
credits field to credits_cnt.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04 09:13:15 +01:00
Christophe Ricard b16ae7160a NFC: nci: Support all destinations type when creating a connection
The current implementation limits nci_core_conn_create_req()
to only manage NCI_DESTINATION_NFCEE.
Add new parameters to nci_core_conn_create() to support all
destination types described in the NCI specification.
Because there are some parameters with variable size dynamic
buffer allocation is needed.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04 09:10:50 +01:00
Christophe Ricard 12bdf27d46 NFC: nci: Add reference to the RF logical connection
The NCI_STATIC_RF_CONN_ID logical connection is the most used
connection. Keeping it directly accessible in the nci_dev
structure will simplify and optimize the access.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-02-04 09:09:53 +01:00