Commit Graph

30 Commits

Author SHA1 Message Date
Mark Brown f72362e6b7 Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', 'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next 2015-10-26 11:16:03 +09:00
Maruthi Srinivas Bayyavarapu ab57b8e90c ASoC: dwc: add check for master/slave format
DW i2s controller's master/slave config can be read from a
read-only register. Machine driver can try to set a master/slave
format on cpu-dai using 'set_fmt' of dai ops. A check is added to
verify codec is master when dwc is slave and vice-versa.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24 06:29:38 +09:00
Maruthi Srinivas Bayyavarapu 1d957d862a ASoC: dwc: support dw i2s in slave mode
dw i2s controller can work in slave mode, codec being master.
dw i2s is made to support master/slave operation, by reading dwc
register.

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05 16:31:43 +01:00
yitian 924eb47512 ASoC: dwc: fix dma stop transferring issue
Designware I2S uses tx empty and rx available signals as the DMA
handshaking signals. during music playing, if XRUN occurs,
i2s_stop() function will be executed and both tx and rx irq are
masked, when music continues to be played, i2s_start() is executed
but both tx and rx irq are not unmasked which cause I2S stop
sending DMA handshaking signal to DMA controller, and it finally
causes music playing will be stopped once XRUN occurs for the first
time.

[On list discussion suggests this may be partly a race condition on slow
systems -- broonie]

Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-02 18:05:51 +01:00
Yitian Bu 4873867e5f ASoC: dwc: correct irq clear method
from Designware I2S datasheet, tx/rx XRUN irq is cleared by
reading register TOR/ROR, rather than by writing into them.

Signed-off-by: Yitian Bu <yitian.bu@tangramtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-10-02 11:44:04 +01:00
Mark Brown d40d19447b Merge remote-tracking branches 'asoc/topic/doc', 'asoc/topic/dwc', 'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next 2015-02-04 20:57:11 +00:00
Andrew Jackson acae254a8e ASoC: dwc: Remove unnecessary conditional compilation
of_match_ptr is already conditionally compiled based on
CONFIG_OF so further conditional compilation is not
required.  Remove conditional compilation surrounding
of_match_ptr.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-28 17:40:08 +00:00
Andrew Jackson 0d274544bf ASoC: dwc: Add devicetree support for Designware I2S
Allow the driver to be configured through a device tree rather than platform
data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:52:28 +00:00
Andrew Jackson 758c2debcb ASoC: dwc: Register components with managed interface
Register SOC component using managed interface to
simplify error handling and future introduction of
device tree.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:49:37 +00:00
Andrew Jackson 3a19272a50 ASoC: dwc: Prepare clock before use
Some I2S clocks may require some time to get the clock ready
for operation and so need to be prepared before they are enabled.
So, prepare the clock as well as enabling it, but combine the
two through clk_prepare_enable.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:49:36 +00:00
Andrew Jackson b226efe581 ASoC: dwc: Read I2S block configuration from registers
The I2S block provides component parameter registers which
describe how the block is instantiated.  Use these registers
to extract the block's configuration rather than relying on
platform data.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:46:14 +00:00
Andrew Jackson a56257c657 ASoC: dwc: Switch to managed clock resource
Simplify error handling during probe by using managed clock
resources.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-30 16:46:14 +00:00
Andrew Jackson db2c1f9e38 ASoC: dwc: Iterate over all channels
The Designware core can be configured with up to four stereo channels.
Each stereo channel is individually configured so, when the driver's
hw_params call is made, each requested stereo channel has to be
programmed.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 15:06:03 +00:00
Andrew Jackson 3475c3d034 ASoC: dwc: Ensure FIFOs are flushed to prevent channel swap
Flush the FIFOs when the stream is prepared for use.  This avoids
an inadvertent swapping of the left/right channels if the FIFOs are
not empty at startup.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-12-22 15:05:54 +00:00
Andrew Jackson afa8603c62 ASoC: dwc: Reorder code in preparation for DT support
Move code that configures the DAI and DMA into a separate function.  This
reduces the size of the dw_i2s_probe function and will make it easier to
add support for device tree to the driver.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 13:59:53 +00:00
Andrew Jackson be33465e58 ASoC: dwc: Remove unnecessary debug messages and tests
The devm_XXX allocation functions print a message on failure,
so additional messages are not required.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-22 13:59:52 +00:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Andrew Jackson b163be4cf4 ASoC: dwc: Allocate resources with devm_ioremap_resource
Prepare for the introduction of device-tree support by re-ordering some
of the allocations and using devm_iomap_resource to simplify IO mapping.

Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03 18:26:51 +00:00
Wolfram Sang 27cbfa122a ASoC: dwc: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:22:07 +02:00
Rajeev Kumar b794dbcd31 ASoC: Update email id of the author
I moved from ST Microelectronics and so updating email-id to personal one.

Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-09 10:49:41 +01:00
Rajeev Kumar 9a302c32f3 ASoC: dwc: Update email id of the author
I moved from ST Microelectronics and the email-id no longer
exists. Update email-id to personal one,

Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-06 12:47:22 +01:00
Fabio Estevam e925a6b1b6 ASoC: designware_i2s: Remove unnecessary dev_set_drvdata()
Driver core clears the driver data to NULL after device_release or on probe
failure, so just remove it from here.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 13:18:32 +01:00
Rajeev Kumar 22a4adf258 ASoC: dwc: Folder path correction in file header.
Folder path correction in file header.

Signed-off-by: Rajeev Kumar <rajeevk-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:19:01 +01:00
Rajeev Kumar 5e83c160d8 ASoC: dwc: debug message correction.
Debug message correction.

Signed-off-by: Rajeev Kumar <rajeevk-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-12 16:15:13 +01:00
Kuninori Morimoto 92eaa328f2 ASoC: switch over to use snd_soc_register_component() on dw i2s
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26 21:55:22 +00:00
Dan Carpenter 0099d24c6b ASoC: dwc: fix support for more than two channels
There were missing break statements so everything used
TWO_CHANNEL_SUPPORT.

Also I added a return statement to silence a GCC warning:

	sound/soc/dwc/designware_i2s.c: In function ‘dw_i2s_hw_params’:
	sound/soc/dwc/designware_i2s.c:236:32: warning: ‘ch_reg’ may be
		used uninitialized in this function
		[-Wmaybe-uninitialized]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 15:37:09 +08:00
Mark Brown 1520ffd218 ASoC: dwc: Staticise non-exported i2s_start()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 19:15:43 +01:00
Mark Brown 6b4a21b64c ASoC: dwc: Add missing __iomem annotations
Otherwise sparse gets very upset with us.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-28 13:14:52 +01:00
Mark Brown d69d65226a ASoC: dwc: Bodge around continuing absence of clock API stubs
The patches for stubbing out the generic clock API still haven't been
applied so we need to either add ifdefs here or add a dependency until
someone decides to actually apply them.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-25 10:01:27 +01:00
Rajeev Kumar 3a9cf8efd7 ASoC: Add support for synopsys i2s controller as per ASoC framework.
This patch add support for synopsys I2S controller as per the ASoC
framework.

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-22 10:25:45 +01:00