Commit Graph

172 Commits

Author SHA1 Message Date
Al Viro 2099c99e3b [PATCH] missing includes of io.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-24 22:01:11 -07:00
Al Viro e4cad1b5a4 [PATCH] passing pointer to setup_timer() should be via unsigned long
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-10 15:37:22 -07:00
Al Viro e069d79d23 [PATCH] tifm __iomem annotations, NULL noise removal
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09 14:19:08 -07:00
Pierre Ossman ec5a19dd93 [PATCH] mmc: multi sector write transfers
SD cards extend the protocol by allowing the host to query a card how many
blocks were successfully stored on the medium.  This allows us to safely write
chunks of blocks at once.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:41 -07:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Pierre Ossman 176f00ffed [PATCH] mmc: properly use the new multi block-write error handling
Use the new multi block-write error reporting flag and properly tell the block
layer how much data was transferred before the error.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
Pierre Ossman 7104e2d5a8 [PATCH] mmc: use own work queue
The MMC layer uses the standard work queue for doing card detection.  As this
queue is shared with other crucial subsystems, the effects of a long (and
perhaps buggy) detection can cause the system to be unusable.  E.g.  the
keyboard stops working while the detection routine is running.

The solution is to add a specific mmc work queue to run the detection code in.
This is similar to how other subsystems handle detection (a full kernel
thread is the most common theme).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:15 -07:00
Pierre Ossman 8a4da1430f [PATCH] mmc: avoid some resets without card
Some Ricoh controllers only respect a full reset when there is no card in the
slot.  As we wait for the reset to complete, we must avoid even requesting
those resets on the buggy controllers.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:14 -07:00
Pierre Ossman 5f25a66f6b [PATCH] mmc: fix MMIO vs memory races in sdhci
Sprinkle some mmiowb() where needed (writeX() before unlock()).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:14 -07:00
Alex Dubov f956512999 [PATCH] mmc: driver for TI FlashMedia card reader - Kconfig/Makefile
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Cc: Daniel Qarras <dqarras@yahoo.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:14 -07:00
Alex Dubov 4020f2d7f0 [PATCH] mmc: driver for TI FlashMedia card reader - source
Driver for TI Flash Media card reader.  At present, only MMC/SD cards are
supported.

[akpm@osdl.org: cleanups, build fixes]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Cc: Daniel Qarras <dqarras@yahoo.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:14 -07:00
Pierre Ossman 643f720cea [PATCH] mmc (mainly): add "or later" clause to licence statement.
Clarify my (Pierre's) position on which GPL versions apply.  The patch only
touches the source files where I am the only major author.  The people who
have made the minor commits to the files have been contacted and have no
issues with this change.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:23 -07:00
David Howells 9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Jens Axboe 4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Linus Torvalds ebdea46fec Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits)
  [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms
  [ARM] 3855/1: Add generic time support
  [ARM] 3873/1: S3C24XX: Add irq_chip names
  [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips
  [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23
  [ARM] nommu: confirms the CR_V bit in nommu mode
  [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores.
  [ARM] 3870/1: AT91: Start removing static memory mappings
  [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
  [ARM] 3868/1: AT91 hardware header update
  [ARM] 3867/1: AT91 GPIO update
  [ARM] 3866/1: AT91 clock update
  [ARM] 3865/1: AT91RM9200 header updates
  [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
  [ARM] kthread: switch arch/arm/kernel/apm.c
  [ARM] Off-by-one in arch/arm/common/icst*
  [ARM] 3864/1: Refactore sharpsl_pm
  [ARM] 3863/1: Add Locomo SPI Device
  [ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs
  [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h
  ...
2006-09-28 14:40:39 -07:00
Linus Torvalds fecf3404f4 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Don't check READY_FOR_DATA when reading
  [MMC] MMC_CAP_BYTEBLOCK flag for non-log2 block sizes capable hosts
  [MMC] Add multi block-write capability
  [MMC] Remove data->blksz_bits member
  [MMC] Convert mmci to use data->blksz rather than data->blksz_bits
2006-09-28 14:23:55 -07:00
Andrew Victor 72729910c3 [ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:05 +01:00
Ralf Baechle 53e62d3aaa [PATCH] Alchemy: Delete unused pt_regs * argument from au1xxx_dbdma_chan_alloc
The third argument of au1xxx_dbdma_chan_alloc's callback function is not
used anywhere.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:54 -07:00
Russell King 2ed6d22cec [MMC] Don't check READY_FOR_DATA when reading
There's no point checking to see if the card is ready to accept
data when we're reading from it - sending the command only wastes
precious bus bandwidth.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-24 10:46:43 +01:00
Russell King 42431acbac [MMC] MMC_CAP_BYTEBLOCK flag for non-log2 block sizes capable hosts
Some MMC hosts can only handle log2 block sizes.  Unfortunately,
the MMC password support needs to be able to send non-log2 block
sizes.  Provide a capability so that the MMC password support can
decide whether it should use this support or not.

The unfortunate side effect of this host limitation is that any
MMC card protected by a password which is not a log2 block size
can not be accessed on a host which only allows a log2 block size.

This change just adds the flag.  The MMC password support code
needs updating to use it (if and when it is finally submitted.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-24 10:44:09 +01:00
Russell King db53f28b3a [MMC] Add multi block-write capability
Add a capability flag for drivers to set when they can perform multi-
block transfers to cards _and_ correctly report the number of bytes
transferred should an error occur.

The last point is very important - if a driver reports more bytes than
were actually accepted by the card and an error occurs, there is the
possibility for data loss.

Pierre Ossman provided the patch for wbsd and sdhci.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 11:57:49 +01:00
Russell King 132919ba80 [MMC] Remove data->blksz_bits member
data->blksz_bits is unused now - remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 11:54:04 +01:00
Russell King 3bc87f243f [MMC] Convert mmci to use data->blksz rather than data->blksz_bits
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-16 11:50:29 +01:00
Pierre Ossman 6fe9febb8a [MMC] Always use a sector size of 512 bytes
Both MMC and SD specifications specify (although a bit unclearly in
the MMC case) that a sector size of 512 bytes must always be
supported by the card.

Cards can report larger "native" size than this, and cards >= 2 GB
even must do so. Most other readers use 512 bytes even for these
cards. We should do the same to be compatible.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07 16:01:30 +01:00
Russell King d773d72551 [MMC] Cleanup 385e3227d4
Rather than having two places which independently calculate the
timeout for data transfers, make it a library function instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2006-09-07 15:57:12 +01:00
Pavel Pisa 148f93d59c [ARM] 3751/1: i.MX/MX1 SD/MMC use 512 bytes request for SCR read
Patch from Pavel Pisa

This is another approach to SDHC deficiency workaround.
It seems, that previous solution based on 16 bytes (FIFO length size)
read is still timing sensitive on genirq and fully preemptive kernels.
The new solution is backuped by M9328 UM statement, that only 512 byte
block are working properly and by 2.4.26 FreeScale's SDHC code.

Jay Monkman reports significant improvement on code based
on this driver after applying this change on MX21 as well.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07 15:53:29 +01:00
Pierre Ossman 385e3227d4 [MMC] Fix SD timeout calculation
Secure Digital cards use a different algorithm to calculate the timeout
for data transfers. Using the MMC one works often, but not always.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-07 13:18:40 +01:00
Pierre Ossman dd2c609c59 [MMC] Another stray 'io' reference
Another misuse of the global 'io' variable instead of the local 'base'.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-07 14:47:54 +01:00
Pierre Ossman 916f3ac680 [MMC] Fix base address configuration in wbsd
There were some confusion about base I/O variables in the wbsd driver.
Seems like things have been working on shear luck so far. The global 'io'
variable (used when manually configuring the resources) was used instead of
the local 'base' variable.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 21:44:48 +01:00
Juha [êölä c723e08af1 [ARM] 3744/1: MMC: mmcqd gets stuck when block queue is plugged
Patch from Juha [êölä

When the block queue is plugged, mq->req must be set to NULL.
Otherwise mq->req might be left non-NULL, even though mmcqd is
not processing a request, thus preventing the MMC queue thread from
being woken up when new requests do arrive.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-06 09:58:22 +01:00
Pierre Ossman 8b1b21853b [MMC] Change SDHCI version error to a warning
O2 Micro's controllers have a larger specification version value and are
therefore denied by the driver. When bypassing this check they seem to work
fine. This patch makes the code a bit more forgiving by changing the error
to a warning.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-13 16:17:46 +01:00
Pierre Ossman fb61e28951 [MMC] Fix incorrect register access
There was a writel() being used on a 16-bit register.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-13 16:17:45 +01:00
Ingo Molnar 0afffc723c [PATCH] lockdep: annotate on-stack completions, mmc
lockdep needs to have the waitqueue lock initialized for on-stack
waitqueues implicitly initialized by DECLARE_COMPLETION().

Annotate mmc_wait_for_req()'s on-stack completion accordingly.

Has no effect on non-lockdep kernels.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:10 -07:00
Linus Torvalds f82bc1762e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: remove duplicate error message
  [MMC] sdhci: force DMA on some controllers
  [MMC] sdhci: quirk for broken reset
  [MMC] sdhci: Add SDHCI controller ids
2006-07-02 16:35:07 -07:00
Linus Torvalds a8c4c20dfa Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...
2006-07-02 15:04:12 -07:00
Linus Torvalds 168d04b3b4 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] sdhci: version bump sdhci
  [MMC] sdhci: support controller specific quirks
  [MMC] sdhci: more DMA capabilities tests
  [MMC] sdhci: reset sdhci controller early
  [MMC] sdhci: check controller version
  [MMC] sdhci: check only relevant inhibit bits
  [MMC] sdhci: Test for invalid block size
  [MMC] sdhci: Avoid sdhci DMA boundaries
  [MMC] Fix sdhci PIO routines
  [MMC] sdhci: fix interrupt handling
  [MMC] sdhci: correct register order
  [MMC] sdhci: proper timeout handling
  [MMC] sdhci: fix sdhci reset timeout
  [MMC] sdhci: fix timeout loops in sdhci
  [MMC] sdhci: support for multiple voltages
  [MMC] sdhci: print device id
  [MMC] sdhci: check SDHCI base clock
2006-07-02 14:58:03 -07:00
Thomas Gleixner dace145374 [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Pierre Ossman 4cca56c504 [MMC] sdhci: remove duplicate error message
When there is remaining blocks untransferred, we get two error messages saying
almost the same thing.  Make sure at most one is shown.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:02 +01:00
Pierre Ossman 98608076a2 [MMC] sdhci: force DMA on some controllers
Some controllers incorrectly report that the cannot do DMA.  Forcefully enable
it for those that we know it works fine on.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:01 +01:00
Pierre Ossman 645289dca5 [MMC] sdhci: quirk for broken reset
Some controllers fail to complete a reset unless you touch the clock register
first.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 18:02:00 +01:00
Pierre Ossman 2c5f394025 [MMC] sdhci: version bump sdhci
New version number for sdhci driver.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:55:00 +01:00
Pierre Ossman df673b227c [MMC] sdhci: support controller specific quirks
As some specific controllers will have bugs, we need a way to map special
behaviour to certain hardware.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:59 +01:00
Pierre Ossman 6743527441 [MMC] sdhci: more DMA capabilities tests
Properly test for controller interface to see if it's DMA capable.  As many
controllers are misconfigured in this regard, also add debug parameters to
force DMA support either way.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:56 +01:00
Pierre Ossman d96649ed5a [MMC] sdhci: reset sdhci controller early
The specification states that the capabilities register might need a reset to
get correct values after boot up.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:54 +01:00
Pierre Ossman 4a9655051f [MMC] sdhci: check controller version
Check the interface version of the controller and bail out if it's an unknown
version.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:53 +01:00
Pierre Ossman fd2208d7c7 [MMC] sdhci: check only relevant inhibit bits
Conform to the sdhci specification as to which inhibit bits should be checked
at different times.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:54:50 +01:00
Pierre Ossman 1d676e0297 [MMC] sdhci: Test for invalid block size
The controller has an upper limit on the block size. Make sure we do not
cross it.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:52:10 +01:00
Pierre Ossman bab7696184 [MMC] sdhci: Avoid sdhci DMA boundaries
The sdhci controllers will issue an interrupt when a configurable number of
bytes have been transfered using DMA. The purpose is to handle multiple,
scattered memory pages.

Unfortunately, it requires that all transfers are completely aligned to
memory pages, which we cannot guarantee. So we just disable the function.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:51:35 +01:00
Pierre Ossman a406f5a3b6 [MMC] Fix sdhci PIO routines
The sdhci controllers operate with blocks, not bytes. The PIO routines must
therefore make sure that the minimum unit transfered is a complete block.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:50:59 +01:00
Pierre Ossman 3192a28f7d [MMC] sdhci: fix interrupt handling
The specification says that interrupts should be cleared before the source is
removed.  We should also not set unknown bits.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02 16:02:05 +01:00