Commit Graph

2514 Commits

Author SHA1 Message Date
Linus Torvalds dd198ce714 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace updates from Eric Biederman:
 "Life has been busy and I have not gotten half as much done this round
  as I would have liked. I delayed it so that a minor conflict
  resolution with the mips tree could spend a little time in linux-next
  before I sent this pull request.

  This includes two long delayed user namespace changes from Kirill
  Tkhai. It also includes a very useful change from Serge Hallyn that
  allows the security capability attribute to be used inside of user
  namespaces. The practical effect of this is people can now untar
  tarballs and install rpms in user namespaces. It had been suggested to
  generalize this and encode some of the namespace information
  information in the xattr name. Upon close inspection that makes the
  things that should be hard easy and the things that should be easy
  more expensive.

  Then there is my bugfix/cleanup for signal injection that removes the
  magic encoding of the siginfo union member from the kernel internal
  si_code. The mips folks reported the case where I had used FPE_FIXME
  me is impossible so I have remove FPE_FIXME from mips, while at the
  same time including a return statement in that case to keep gcc from
  complaining about unitialized variables.

  I almost finished the work to get make copy_siginfo_to_user a trivial
  copy to user. The code is available at:

     git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3

  But I did not have time/energy to get the code posted and reviewed
  before the merge window opened.

  I was able to see that the security excuse for just copying fields
  that we know are initialized doesn't work in practice there are buggy
  initializations that don't initialize the proper fields in siginfo. So
  we still sometimes copy unitialized data to userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Introduce v3 namespaced file capabilities
  mips/signal: In force_fcr31_sig return in the impossible case
  signal: Remove kernel interal si_code magic
  fcntl: Don't use ambiguous SIG_POLL si_codes
  prctl: Allow local CAP_SYS_ADMIN changing exe_file
  security: Use user_namespace::level to avoid redundant iterations in cap_capable()
  userns,pidns: Verify the userns for new pid namespaces
  signal/testing: Don't look for __SI_FAULT in userspace
  signal/mips: Document a conflict with SI_USER with SIGFPE
  signal/sparc: Document a conflict with SI_USER with SIGFPE
  signal/ia64: Document a conflict with SI_USER with SIGFPE
  signal/alpha: Document a conflict with SI_USER for SIGTRAP
2017-09-11 18:34:47 -07:00
Linus Torvalds a59e57da49 MTD changes for 4.14:
General updates:
  * Constify pci_device_id in various drivers
  * Constify device_type
  * Remove pad control code from the Gemini driver
  * Use %pOF to print OF node full_name
  * Various fixes in the physmap_of driver
  * Remove unused vars in mtdswap
  * Check devm_kzalloc() return value in the spear_smi driver
  * Check clk_prepare_enable() return code in the st_spi_fsm driver
  * Create per MTD device debugfs enties
 
 NAND updates, from Boris Brezillon:
  * Fix memory leaks in the core
  * Remove unused NAND locking support
  * Rename nand.h into rawnand.h (preparing support for spi NANDs)
  * Use NAND_MAX_ID_LEN where appropriate
  * Fix support for 20nm Hynix chips
  * Fix support for Samsung and Hynix SLC NANDs
  * Various cleanup, improvements and fixes in the qcom driver
  * Fixes for bugs detected by various static code analysis tools
  * Fix mxc ooblayout definition
  * Add a new part_parsers to tmio and sharpsl platform data in order to
    define a custom list of partition parsers
  * Request the reset line in exclusive mode in the sunxi driver
  * Fix a build error in the orion-nand driver when compiled for ARMv4
  * Allow 64-bit mvebu platforms to select the PXA3XX driver
 
 SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
  * add support to the JEDEC JESD216B specification (SFDP tables).
  * add support to the Intel Denverton SPI flash controller.
  * fix error recovery for Spansion/Cypress SPI NOR memories.
  * fix 4-byte address management for the Aspeed SPI controller.
  * add support to some Microchip SST26 memory parts
  * remove unneeded pinctrl header Write a message for tag:
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZrav6Ixxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcABwkP/joDrq09RIC9n5gP+ubJe6O1jKvNWDd6bIVXD3Ke
 73R0a0ANwwWlNYWTChTdrb8UeewVS1bzutyy5O2Sbdb6Jc6s7xkfQDTsbET2HWOK
 S7Lt/zjlC6/6cow59B6h43PGS6wmIFaZD3K+70sGhvFnV8epVUzS2Aa783xS8LXm
 so2djZOdUYnW+yE0eho24VQR6nS4YP4Vc+7Mm9skjU0ifjB9mJiWRkzoQnqIgORO
 M+Iab+qjDs9KR/edWh6mZtnvjps0VSW4I40YsClpcgIn550w1DSXe4u6/8Nk+2Bp
 gfrALls91gob0ocxmEdIyLID+M0410HcN/Lvh36nw+tkkGTaXf0D6mkqzdKNrZ3w
 yz+UV9uf19kr1c6zFGcCvUlD0btn9KT+F2legnhgURtwUyDFQcaYQlkpDIeEzUMV
 ZrtzKbSE2v9810YKXjtCnseewdP+Eph/ewN6ODX5yg/fs8K0fyQYTRtYYM50U69X
 md8zznBBDPhJVu5T2Of7my9V1SxvCP8a7LrKjAXuFHpZ/CHiPe+QOWBgG2L+zXXT
 e10/rTg7T2pcyKpBvL/3/mCYeJ+Iup3lKT1EHGCXcKnLGecVgOsbvdG+JnvQMI2J
 FLmu1exvrzi0Gcrs/05hqwyUvkHZ5FB1a+heNOtmQ+h1U0ElXqILyu7brzghupRe
 3phO
 =UgCd
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...
2017-09-09 14:48:21 -07:00
Linus Torvalds d2d8f51e28 Merge branch 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...
2017-09-09 14:18:40 -07:00
Boris Brezillon d1f936d736 This pull request contains the following core changes:
* Fix memory leaks in the core
 * Remove unused NAND locking support
 * Rename nand.h into rawnand.h (preparing support for spi NANDs)
 * Use NAND_MAX_ID_LEN where appropriate
 * Fix support for 20nm Hynix chips
 * Fix support for Samsung and Hynix SLC NANDs
 
 and the following driver changes:
 
 * Various cleanup, improvements and fixes in the qcom driver
 * Fixes for bugs detected by various static code analysis tools
 * Fix mxc ooblayout definition
 * Add a new part_parsers to tmio and sharpsl platform data in order to
   define a custom list of partition parsers
 * Request the reset line in exclusive mode in the sunxi driver
 * Fix a build error in the orion-nand driver when compiled for ARMv4
 * Allow 64-bit mvebu platforms to select the PXA3XX driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZpwMZIxxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcAJEoP/jRnEjPznWT3+ngw6k/rnykkn/wexKV3iyX/6b71
 MQT/ZFuT3HsHnUjyprPvyRWJeKun6XyIH5fk7FlXIei9TaWCt6/UGTKousaPKeR2
 maggGeEjxGVpHJM/jpIYCyjt83zpezBqTupv52XhXxPaU7ROSpuHCd92YcPzIaT5
 tcn8JrI7TGuGlBrBbA2y8ZrPtuug3IKqUfpIiQmoqr0jzQR+AbZKHg0kk5a8piOn
 OguK67uhxeOvq831bGPehCPDbuE0loNi4CssayJ1HrisfS95kH/cqrveapgKsUG/
 fxaHh1i65I0lxa8sgUgeUiU04Zsy1YcgNbCj41AY4AHnjJ0+Qp1cV6KAB/x5/wH9
 ES/fW06how+1BLEeLvOr+rIQ41WeP0qV2H3r/PtkeswKKAV3gSERBXVHmg1E7Yum
 HkmPqzhu+nSk3mP7p3yxpd7EwWQh2xpvVYrfQ5vQbtdfm8Uw9n6S8x+O89ch9wWi
 +KbMWFsmF78nuRWW3WTsaiOFKcTRLBT5RoU2z4i9hCvQT2Pnx3SBhHrIj6xqBI1S
 8MpeDdlXHmRQfZxj+jDqU77JYqVEmy/5it9OjhjMpOqxfCf4K6Nlb75TEdR5Nh/9
 BA1qqTBEslg3UqS8ofGFHGFZWrW3JHf02SYo2zU9IvBninh3HrqHiFhBc3p1xNDE
 7GwD
 =bC1+
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next

From Boris:
"
This pull request contains the following core changes:

* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs

and the following driver changes:

* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
  define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
"
2017-09-01 15:34:30 +02:00
Wolfram Sang a1cc5a57e4 blackfin: merge the two TWI header files
There seems to be no need for separate ones since all users include both
files anyhow. Merge them because include/linux/i2c is to be deprecated.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-08-27 15:37:18 +02:00
Paul E. McKenney 656e7c0c0a Merge branches 'doc.2017.08.17a', 'fixes.2017.08.17a', 'hotplug.2017.07.25b', 'misc.2017.08.17a', 'spin_unlock_wait_no.2017.08.17a', 'srcu.2017.07.27c' and 'torture.2017.07.24c' into HEAD
doc.2017.08.17a: Documentation updates.
fixes.2017.08.17a: RCU fixes.
hotplug.2017.07.25b: CPU-hotplug updates.
misc.2017.08.17a: Miscellaneous fixes outside of RCU (give or take conflicts).
spin_unlock_wait_no.2017.08.17a: Remove spin_unlock_wait().
srcu.2017.07.27c: SRCU updates.
torture.2017.07.24c: Torture-test updates.
2017-08-17 08:10:04 -07:00
Paul E. McKenney 952111d7db arch: Remove spin_unlock_wait() arch-specific definitions
There is no agreed-upon definition of spin_unlock_wait()'s semantics,
and it appears that all callers could do just as well with a lock/unlock
pair.  This commit therefore removes the underlying arch-specific
arch_spin_unlock_wait() for all architectures providing them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
2017-08-17 08:08:59 -07:00
Boris Brezillon d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00
Joe Perches e2c75fcae4 module: Fix pr_fmt() bug for header use of printk
This commit removes the pr_fmt() macro, replacing it with mod_err() and
mod_debug() macros to avoid errors when using printk() from header files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-07-24 16:01:33 -07:00
Eric W. Biederman cc731525f2 signal: Remove kernel interal si_code magic
struct siginfo is a union and the kernel since 2.4 has been hiding a union
tag in the high 16bits of si_code using the values:
__SI_KILL
__SI_TIMER
__SI_POLL
__SI_FAULT
__SI_CHLD
__SI_RT
__SI_MESGQ
__SI_SYS

While this looks plausible on the surface, in practice this situation has
not worked well.

- Injected positive signals are not copied to user space properly
  unless they have these magic high bits set.

- Injected positive signals are not reported properly by signalfd
  unless they have these magic high bits set.

- These kernel internal values leaked to userspace via ptrace_peek_siginfo

- It was possible to inject these kernel internal values and cause the
  the kernel to misbehave.

- Kernel developers got confused and expected these kernel internal values
  in userspace in kernel self tests.

- Kernel developers got confused and set si_code to __SI_FAULT which
  is SI_USER in userspace which causes userspace to think an ordinary user
  sent the signal and that it was not kernel generated.

- The values make it impossible to reorganize the code to transform
  siginfo_copy_to_user into a plain copy_to_user.  As si_code must
  be massaged before being passed to userspace.

So remove these kernel internal si codes and make the kernel code simpler
and more maintainable.

To replace these kernel internal magic si_codes introduce the helper
function siginfo_layout, that takes a signal number and an si_code and
computes which union member of siginfo is being used.  Have
siginfo_layout return an enumeration so that gcc will have enough
information to warn if a switch statement does not handle all of union
members.

A couple of architectures have a messed up ABI that defines signal
specific duplications of SI_USER which causes more special cases in
siginfo_layout than I would like.  The good news is only problem
architectures pay the cost.

Update all of the code that used the previous magic __SI_ values to
use the new SIL_ values and to call siginfo_layout to get those
values.  Escept where not all of the cases are handled remove the
defaults in the switch statements so that if a new case is missed in
the future the lack will show up at compile time.

Modify the code that copies siginfo si_code to userspace to just copy
the value and not cast si_code to a short first.  The high bits are no
longer used to hold a magic union member.

Fixup the siginfo header files to stop including the __SI_ values in
their constants and for the headers that were missing it to properly
update the number of si_codes for each signal type.

The fixes to copy_siginfo_from_user32 implementations has the
interesting property that several of them perviously should never have
worked as the __SI_ values they depended up where kernel internal.
With that dependency gone those implementations should work much
better.

The idea of not passing the __SI_ values out to userspace and then
not reinserting them has been tested with criu and criu worked without
changes.

Ref: 2.4.0-test1
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-07-24 14:30:28 -05:00
Linus Torvalds 0a6109fd1b Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
 "A fix to WARN_ON_ONCE() done by modules, plus a MAINTAINERS update"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debug: Fix WARN_ON_ONCE() for modules
  MAINTAINERS: Update the PTRACE entry
2017-07-21 10:41:19 -07:00
Josh Poimboeuf 325cdacd03 debug: Fix WARN_ON_ONCE() for modules
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM
code turned into an oops.  As it turns out, WARN_ON_ONCE() seems to be
completely broken when called from a module.

The bug was introduced with the following commit:

  19d436268d ("debug: Add _ONCE() logic to report_bug()")

That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug
trap handler.  It requires a writable bug table so that the BUGFLAG_DONE
bit can be written to the flags to indicate the first warning has
occurred.

The bug table was made writable for vmlinux, which relies on
vmlinux.lds.S and vmlinux.lds.h for laying out the sections.  However,
it wasn't made writable for modules, which rely on the ELF section
header flags.

Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 19d436268d ("debug: Add _ONCE() logic to report_bug()")
Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-20 12:31:04 +02:00
Geert Uytterhoeven cb0fbbf22a Blackfin: flat: Use %x to format u32
Several variables had their types changed from unsigned long to u32,
but the printk()-style format to print them wasn't updated, leading to:

    arch/blackfin/kernel/flat.c: In function 'bfin_get_addr_from_rp':
    arch/blackfin/kernel/flat.c:35:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'u32' [-Wformat]
    arch/blackfin/kernel/flat.c: In function 'bfin_put_addr_at_rp':
    arch/blackfin/kernel/flat.c:80:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'u32' [-Wformat]

Fixes: 468138d785 ("binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-17 11:40:33 -07:00
Geert Uytterhoeven 9f42ef4bc2 blackfin, m68k: Fix flat_set_persistent() for unsigned long to u32 changes
Several variables had their types changed from unsigned long to u32, but
the arch-specific implementations of flat_set_persistent() weren't
updated, leading to compiler warnings on blackfin and m68k:

    fs/binfmt_flat.c: In function ‘load_flat_file’:
    fs/binfmt_flat.c:799: warning: passing argument 2 of ‘flat_set_persistent’ from incompatible pointer type

Fixes: 468138d785 ("binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-16 09:24:06 -07:00
Linus Torvalds 89cbec71fe Merge branch 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uacess-unaligned removal from Al Viro:
 "That stuff had just one user, and an exotic one, at that - binfmt_flat
  on arm and m68k"

* 'work.uaccess-unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  kill {__,}{get,put}_user_unaligned()
  binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
2017-07-15 11:17:52 -07:00
Linus Torvalds 80fc623809 Kbuild updates for v4.13 (2nd)
- Move generic-y of exported headers to uapi/asm/Kbuild
   for complete de-coupling of UAPI
 
 - Clean up scripts/Makefile.headersinst
 
 - Fix host programs for 32 bit machine with XFS file system
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZZ5yPAAoJED2LAQed4NsGSHkP/1sQy6k7OnBZKNzYsYXdUfQT
 tNm+k0NVZJk2jSa2ASHFMCEywnZ/afBU6nyvYSs4zKI6biaV/k0XZ2PqN0JDNmNh
 9cZEoW1iPgnmu6Y+VxFxezjO34Qr2Gi94e55SO8qSfCZsrfcsr4OMCNTd67ar2YB
 IbIV5+sCCO/dzkX9F2UnNX+elt2PfJ1yoJCeVHOmMmtv+I5MbQhNhpF9gElhYSc3
 dDckZvoNOPCP5ddQcUqLbIFL1GVzse4XkY5l766RlnvPjguNmktzrRBxtOT3g6oP
 kJSmYYh7DcctTFS8c1lqf0ERNxoshGBIagPieROVF1wpBXY8hDsUPV6Xr/L/5qPo
 Iy4A8SsvRADRPf5HKspN6ykg0/bttcNOCBIp2EEYuxomIa9D3BTf8vJZaJU/LrYv
 zsZMQ5t78oH6HmkubmGlvb/5Mvt/Vi5upXHgmJtZ4cwT1meURpOhcPmoer4hs++/
 QimZ5JnngAhB8w5oYPr/3vnJaWUA1VZnmZq64AXPHQoExc+Q9gJUtan91GjIq/Kb
 HVKpDQn82/qfPFoTiJ4/CksLtF/s9e20CzGfFbPE8N9ekJoWGnIFW7yly2Bi/5C7
 4oBjLT9gDZP5+nouM14/DwPCmjVTmx29Uj9aXDrE9a+jhKeycKWNeAx6coHiqS8v
 DK7gzKyuovdmuu5T7y9P
 =Sw8W
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - Move generic-y of exported headers to uapi/asm/Kbuild for complete
   de-coupling of UAPI

 - Clean up scripts/Makefile.headersinst

 - Fix host programs for 32 bit machine with XFS file system

* tag 'kbuild-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  kbuild: Enable Large File Support for hostprogs
  kbuild: remove wrapper files handling from Makefile.headersinst
  kbuild: split exported generic header creation into uapi-asm-generic
  kbuild: do not include old-kbuild-file from Makefile.headersinst
  xtensa: move generic-y of exported headers to uapi/asm/Kbuild
  unicore32: move generic-y of exported headers to uapi/asm/Kbuild
  tile: move generic-y of exported headers to uapi/asm/Kbuild
  sparc: move generic-y of exported headers to uapi/asm/Kbuild
  sh: move generic-y of exported headers to uapi/asm/Kbuild
  parisc: move generic-y of exported headers to uapi/asm/Kbuild
  openrisc: move generic-y of exported headers to uapi/asm/Kbuild
  nios2: move generic-y of exported headers to uapi/asm/Kbuild
  nios2: remove unneeded arch/nios2/include/(generated/)asm/signal.h
  microblaze: move generic-y of exported headers to uapi/asm/Kbuild
  metag: move generic-y of exported headers to uapi/asm/Kbuild
  m68k: move generic-y of exported headers to uapi/asm/Kbuild
  m32r: move generic-y of exported headers to uapi/asm/Kbuild
  ia64: remove redundant generic-y += kvm_para.h from asm/Kbuild
  hexagon: move generic-y of exported headers to uapi/asm/Kbuild
  h8300: move generic-y of exported headers to uapi/asm/Kbuild
  ...
2017-07-13 13:37:57 -07:00
Nicholas Piggin f2e0cff85e kernel/watchdog: introduce arch_touch_nmi_watchdog()
For architectures that define HAVE_NMI_WATCHDOG, instead of having them
provide the complete touch_nmi_watchdog() function, just have them
provide arch_touch_nmi_watchdog().

This gives the generic code more flexibility in implementing this
function, and arch implementations don't miss out on touching the
softlockup watchdog or other generic details.

Link: http://lkml.kernel.org/r/20170616065715.18390-3-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Babu Moger <babu.moger@oracle.com>
Tested-by: Babu Moger <babu.moger@oracle.com>	[sparc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:02 -07:00
Masahiro Yamada 6b4be36250 blackfin: move generic-y of exported headers to uapi/asm/Kbuild
Since commit fcc8487d47 ("uapi: export all headers under uapi
directories"), all (and only) headers under uapi directories are
exported, but asm-generic wrappers are still exceptions.

To complete de-coupling the uapi from kernel headers, move generic-y
of exported headers to uapi/asm/Kbuild.

With this change, "make headers_install" will just need to parse
uapi/asm/Kbuild to build up exported headers.

Also, move "generic-y += kprobes.h" up in order to keep the entries
sorted.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-07-10 03:43:22 +09:00
Linus Torvalds df7cb187ed - Core Frameworks
- Report correct error status to user
 
  - Fix-ups
    - Move Backlight headers out of I2C; adp8860, adp8870
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZXgAWAAoJEFGvii+H/HdhlrQP/j+PXYo6jgYg+uoNvlKpgBWD
 bkx2JM9fXA6ZFaEhcvU1LWCt+CqnBeL6ujDb7GBJTRrazws1vZ2Snjrbl/go+6Y2
 h4thCecO9AJG1YaDXsWdDjLu9Flx+ZqKS7r+fyp/0O+s+G78SiQZHfoPKNplfrD3
 TQpw4MIMRPqeYILgIzOXkBg+HEa2L5oQD1zyr6wIUyqNQIQIR7cUHdVutd241BTD
 JitNk39e8CW8jw9zpYJKb7KxdwLtgm7iU6Lf+DWBffVtzh4CY7vJC0WZla7W6lhL
 uzBH5mgvmfpRg8/FL37dgQrmal1MHzkXJ5EHQk+08D+Yk6b2vqw6PBDSQ2ZZJmr5
 SLyLZK1Y1s2+wX+X7fit71QrcUWDUSYOhh+9GKDwcVfNqacWzro1i2p2ovOTntW4
 JbGx8u+UU9pcz1sY1qljjYKxi6G1EAvHbwwobe3syleqh7I09RsnSKqi6ZEXbLAE
 Nfxe4K+djnoirtjFL8vpIy0rXFGQKccIAisid5rFnXjL9rVB/7FiQWGovav+9YuG
 rpr+dQJe5FlLaeTx9CDZeFeefwVyaDOBVJsVC0yghJoz3o2tz/et5zhBEAtLtMQP
 DkS+mEFYLv3ZkXy2Wu4jU7y4jPoeRwTQrGaaUnsh/H+/dAmY6LH6Ccl2My+H0RBi
 wAFUl1yW8G+qgr8mhT7y
 =QD8S
 -----END PGP SIGNATURE-----

Merge tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "Core Framework:
   - Report correct error status to user

  Fix-ups:
   - Move Backlight headers out of I2C (adp8860, adp8870)"

* tag 'backlight-next-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  video: adp8870: move header file out of I2C realm
  backlight: adp8860: Move header file out of I2C realm
  backlight: Report error on failure
2017-07-07 13:38:26 -07:00
Linus Torvalds c7d28eca1d This is the bulk of GPIO changes for the v4.13 series:
Core:
 - Export add/remove for lookup tables so that modules can export GPIO
   descriptor tables.
 - Handle GPIO sleep states: it is now possible to flag that a GPIO line
   may loose its state during suspend/resume of the system to save
   power. This is used in the Wolfson Micro Arizona driver.
 - ACPI-based GPIO was tightened up a lot around the edges.
 - Use bitmap_fill() to speed up a loop.
 
 New drivers:
 - Exar XRA1403 SPI-based GPIO.
 - MVEBU driver now supports Armada 7K and 8K.
 - LP87565 PMIC GPIO.
 - Renesas R-CAR R8A7743 (RZ/G1M).
 - The new IOT2040 8250 serial/GPIO also comes in through this
   changeset.
 
 Substantial driver changes:
 - Seriously fix the Exar 8250 GPIO portions to work.
 - The MCP23S08 was moved out to a pin control driver.
 - Convert MEVEBU to use regmap for register access.
 - Drop Vulcan support from the Broadcom driver.
 - Serious cleanup and improvement of the mockup driver, giving us a
   better test coverage.
 
 Misc:
 - Lots of janitorial clean up.
 - A bunch of documentation fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr
 Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof
 TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v
 idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn
 Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy
 OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB
 FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq
 gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G
 DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E
 WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB
 fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D
 WpbE9LyAH9FY5BM8YjFX
 =TpW1
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...
2017-07-07 12:40:27 -07:00
Linus Torvalds dc502142b6 Merge branch 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull user access str* updates from Al Viro:
 "uaccess str...() dead code removal"

* 'uaccess.strlen' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  s390 keyboard.c: don't open-code strndup_user()
  mips: get rid of unused __strnlen_user()
  get rid of unused __strncpy_from_user() instances
  kill strlen_user()
2017-07-06 22:07:44 -07:00
Linus Torvalds f72e24a124 This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
 code related to dma-mapping, and will further consolidate arch code
 into common helpers.
 
 This pull request contains:
 
  - removal of the DMA_ERROR_CODE macro, replacing it with calls
    to ->mapping_error so that the dma_map_ops instances are
    more self contained and can be shared across architectures (me)
  - removal of the ->set_dma_mask method, which duplicates the
    ->dma_capable one in terms of functionality, but requires more
    duplicate code.
  - various updates for the coherent dma pool and related arm code
    (Vladimir)
  - various smaller cleanups (me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlldmw0LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOiKA/+Ln1mFLSf3nfTzIHa24Bbk8ZTGr0B8TD4Vmyyt8iG
 oO3AeaTLn3d6ugbH/uih/tPz8PuyXsdiTC1rI/ejDMiwMTSjW6phSiIHGcStSR9X
 VFNhmMFacp7QpUpvxceV0XZYKDViAoQgHeGdp3l+K5h/v4AYePV/v/5RjQPaEyOh
 YLbCzETO+24mRWdJxdAqtTW4ovYhzj6XsiJ+pAjlV0+SWU6m5L5E+VAPNi1vqv1H
 1O2KeCFvVYEpcnfL3qnkw2timcjmfCfeFAd9mCUAc8mSRBfs3QgDTKw3XdHdtRml
 LU2WuA5cpMrOdBO4mVra2plo8E2szvpB1OZZXoKKdCpK3VGwVpVHcTvClK2Ks/3B
 GDLieroEQNu2ZIUIdWXf/g2x6le3BcC9MmpkAhnGPqCZ7skaIBO5Cjpxm0zTJAPl
 PPY3CMBBEktAvys6DcudOYGixNjKUuAm5lnfpcfTEklFdG0AjhdK/jZOplAFA6w4
 LCiy0rGHM8ZbVAaFxbYoFCqgcjnv6EjSiqkJxVI4fu/Q7v9YXfdPnEmE0PJwCVo5
 +i7aCLgrYshTdHr/F3e5EuofHN3TDHwXNJKGh/x97t+6tt326QMvDKX059Kxst7R
 rFukGbrYvG8Y7yXwrSDbusl443ta0Ht7T1oL4YUoJTZp0nScAyEluDTmrH1JVCsT
 R4o=
 =0Fso
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping infrastructure from Christoph Hellwig:
 "This is the first pull request for the new dma-mapping subsystem

  In this new subsystem we'll try to properly maintain all the generic
  code related to dma-mapping, and will further consolidate arch code
  into common helpers.

  This pull request contains:

   - removal of the DMA_ERROR_CODE macro, replacing it with calls to
     ->mapping_error so that the dma_map_ops instances are more self
     contained and can be shared across architectures (me)

   - removal of the ->set_dma_mask method, which duplicates the
     ->dma_capable one in terms of functionality, but requires more
     duplicate code.

   - various updates for the coherent dma pool and related arm code
     (Vladimir)

   - various smaller cleanups (me)"

* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
  ARM: dma-mapping: Remove traces of NOMMU code
  ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
  ARM: NOMMU: Introduce dma operations for noMMU
  drivers: dma-mapping: allow dma_common_mmap() for NOMMU
  drivers: dma-coherent: Introduce default DMA pool
  drivers: dma-coherent: Account dma_pfn_offset when used with device tree
  dma: Take into account dma_pfn_offset
  dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
  dma-mapping: remove dmam_free_noncoherent
  crypto: qat - avoid an uninitialized variable warning
  au1100fb: remove a bogus dma_free_nonconsistent call
  MAINTAINERS: add entry for dma mapping helpers
  powerpc: merge __dma_set_mask into dma_set_mask
  dma-mapping: remove the set_dma_mask method
  powerpc/cell: use the dma_supported method for ops switching
  powerpc/cell: clean up fixed mapping dma_ops initialization
  tile: remove dma_supported and mapping_error methods
  xen-swiotlb: remove xen_swiotlb_set_dma_mask
  arm: implement ->dma_supported instead of ->set_dma_mask
  mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
  ...
2017-07-06 19:20:54 -07:00
Linus Torvalds ac7b75966c This is the big bulk of pin control changes for the v4.13 series:
Core:
 
 - The documentation is moved over to RST.
 - We now have agreed bindings for enabling input and output
   buffers without actually enabling input and/or output on a
   pin. We are chiseling out some details of pin control
   electronics.
 
 New drivers:
 
 - ZTE ZX
 - Renesas RZA1
 - MIPS Ingenic JZ47xx: also switch over existing drivers in the
   tree to use this pin controller and consolidate earlier
   spread out code.
 - Microschip MCP23S08: this driver is migrated from the GPIO
   subsystem and totally rewritten to use proper pin control.
   All users are switched over.
 
 New subdrivers:
 
 - Renesas R8A7743 and R8A7745.
 - Allwinner Sunxi A83T R_PIO.
 - Marvell MVEBU Armada CP110 and AP806.
 - Intel Cannon Lake PCH.
 - Qualcomm IPQ8074.
 
 Notable improvements:
 
 - IRQ support on the Marvell MVEBU Armada 37xx.
 - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
 - Rockchip driver now supports iomux-route switching for
   RK3228, RK3328 and RK3399.
 - Rockchip A10 and A20 are merged into a single driver.
 - STM32 has improved GPIO support.
 - Samsung Exynos drivers are split per ARMv7 and ARMv8.
 - Marvell MVEBU is converted to use regmap for register
   access.
 
 Maintenance:
 
 - Several Renesas SH-PFC refactorings and updates.
 - Serious code size cut for Mediatek MT7623.
 - Misc janitorial and MAINTAINERS fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXeUhAAoJEEEQszewGV1zcl8QAMZ6To2JBQeK0Qi+pik9ZbW7
 CvnIFT7E4X45tstwFNKIgdQ1C/IcfzKpPSUDRUqi2nWJiWcuYgn3wQwQ5qbkGtaG
 vne0KVChgFGkT2SwycUZy11JxuP75U73e27BwAruxHhwWo5PesUOjjkmUtMqdbNQ
 VAwx6KoCBx1VBlb0uscbSSqFyAspdyeAHPEvSj4IpsqRZzT7YFqDm4C+uTnwavPx
 ZLoTji0HCpPIAo4C8JUAvweWbpxMC1IMdfm9jRkZ4rR/gTFQXvK+9ssI6lxSK6a6
 RiCJaAE6wQHKYm4LL0pGbW+aMGWRRRp8MERNmg8NgnWONcfCxYowoOYeYLeqPhAg
 kWkFHlmjpfo/A79V6tmN32vCpeQd34XGCetMpI93TuZ42olniD2Puv6RscVaSP3T
 3mIqydX9BY8iAviyMaLcHQeChaNdhLQi+AVjrn1VQjdkWn0C7uR++JznsyaxaI+S
 cVadl6k8H393R1Qdvh3JdoL0owsntQxWVWCbR6fyAZTHHiLGEyvL1ceO/rbpSRrn
 c8Ghk5s7f3DFltn7yWiV4k3KVhDPb5iK2dYP9uGCgqbigHWqlcB5PanRu1aGSFov
 h/1VFEMagNCXQCrgGcIfmkEiwW3SqUsFaaoMLhlYpNb/ON3ihGgsZYiczWSj8l4L
 yfCOoszuEsVkV1dFNAjA
 =dUFL
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...
2017-07-06 11:38:59 -07:00
Wolfram Sang 056d6ff470 video: adp8870: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-06 08:58:39 +01:00
Wolfram Sang 8476d6cde2 backlight: adp8860: Move header file out of I2C realm
include/linux/i2c is not for client devices.

Move the header file to a more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-07-06 08:56:08 +01:00
Al Viro 468138d785 binfmt_flat: flat_{get,put}_addr_from_rp() should be able to fail
on MMU targets EFAULT is possible here.  Make both return 0 or error,
passing what used to be the return value of flat_get_addr_from_rp()
by reference.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-07-03 18:44:02 -04:00
Vladimir Murzin 07c75d7a6b drivers: dma-mapping: allow dma_common_mmap() for NOMMU
Currently, internals of dma_common_mmap() is compiled out if build is
done for either NOMMU or target which explicitly says it does not
have/want coherent DMA mmap. It turned out that dma_common_mmap() can
be handy in NOMMU setup (at least for ARM).

This patch converts exitent NOMMU targets to use ARCH_NO_COHERENT_DMA_MMAP,
thus when CONFIG_MMU is gone from dma_common_mmap() their behaviour stays
unchanged.

ARM is not converted to ARCH_NO_COHERENT_DMA_MMAP because it 1)
already has mmap callback which can handle (at some extent) NOMMU 2)
already defines dummy pgprot_noncached() for NOMMU build.

c6x and frv stay untouched since they already have ARCH_NO_COHERENT_DMA_MMAP.

Cc: Steven Miao <realmz6@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
2017-06-30 10:03:07 -07:00
Tobias Klauser 6474924e2b arch: remove unused macro/function thread_saved_pc()
The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d55977 ("sched/core: Remove pointless printout in
sched_show_task()").  Remove the implementations as well.

Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-28 16:13:57 -07:00
Wolfram Sang c1a4634013 gpio: adp5588: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29 13:36:45 +02:00
Sebastian Reichel ce9bd0a0ff pinctrl: mcp23s08: simplify spi_present_mask handling
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 09:50:47 +02:00
Sebastian Reichel 64ac43e6fa gpio: mcp23s08: move to pinctrl
This moves the mcp23s08 driver from gpio to pinctrl. Actual
pinctrl support for configuration of the pull-up resistors
follows in its own patch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 09:45:29 +02:00
Al Viro 8298525839 kill strlen_user()
no callers, no consistent semantics, no sane way to use it...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-05-15 23:40:22 -04:00
Nicolas Dichtel fcc8487d47 uapi: export all headers under uapi directories
Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-05-11 00:21:54 +09:00
Masahiro Yamada accce8e7e8 blackfin: bf609: let clk_disable() return immediately if clk is NULL
In many of clk_disable() implementations, it is a no-op for a NULL
pointer input, but this is one of the exceptions.

Making it treewide consistent will allow clock consumers to call
clk_disable() without NULL pointer check.

Link: http://lkml.kernel.org/r/1490692624-11931-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03 15:52:07 -07:00
Linus Torvalds 3fb9268e43 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - unwinder fixes and enhancements

   - improve ftrace interaction with the unwinder

   - optimize the code footprint of WARN() and related debugging
     constructs

   - ... plus misc updates, cleanups and fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/unwind: Dump all stacks in unwind_dump()
  x86/unwind: Silence more entry-code related warnings
  x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
  x86/unwind: Remove unused 'sp' parameter in unwind_dump()
  x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
  x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
  x86/unwind: Ensure stack pointer is aligned
  debug: Avoid setting BUGFLAG_WARNING twice
  x86/unwind: Silence entry-related warnings
  x86/unwind: Read stack return address in update_stack_state()
  x86/unwind: Move common code into update_stack_state()
  debug: Fix __bug_table[] in arch linker scripts
  debug: Add _ONCE() logic to report_bug()
  x86/debug: Define BUG() again for !CONFIG_BUG
  x86/debug: Implement __WARN() using UD0
  x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
  x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
  x86/ftrace: Clean up ftrace_regs_caller
  x86/ftrace: Add stack frame pointer to ftrace_caller
  x86/ftrace: Move the ftrace specific code out of entry_32.S
  ...
2017-05-01 22:07:51 -07:00
Linus Torvalds 174ddfd5df Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "The timer departement delivers:

   - more year 2038 rework

   - a massive rework of the arm achitected timer

   - preparatory patches to allow NTP correction of clock event devices
     to avoid early expiry

   - the usual pile of fixes and enhancements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
  timer/sysclt: Restrict timer migration sysctl values to 0 and 1
  arm64/arch_timer: Mark errata handlers as __maybe_unused
  Clocksource/mips-gic: Remove redundant non devicetree init
  MIPS/Malta: Probe gic-timer via devicetree
  clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
  acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
  acpi/arm64: Add memory-mapped timer support in GTDT driver
  clocksource: arm_arch_timer: simplify ACPI support code.
  acpi/arm64: Add GTDT table parse driver
  clocksource: arm_arch_timer: split MMIO timer probing.
  clocksource: arm_arch_timer: add structs to describe MMIO timer
  clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
  clocksource: arm_arch_timer: refactor arch_timer_needs_probing
  clocksource: arm_arch_timer: split dt-only rate handling
  x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
  unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
  um/time: Set ->min_delta_ticks and ->max_delta_ticks
  tile/time: Set ->min_delta_ticks and ->max_delta_ticks
  score/time: Set ->min_delta_ticks and ->max_delta_ticks
  ...
2017-05-01 16:15:18 -07:00
Al Viro 701cac61d0 CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
all architectures converted

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26 12:11:01 -04:00
Nicolai Stange 18154c5c97 blackfin: time-ts: Set ->min_delta_ticks and ->max_delta_ticks
In preparation for making the clockevents core NTP correction aware,
all clockevent device drivers must set ->min_delta_ticks and
->max_delta_ticks rather than ->min_delta_ns and ->max_delta_ns: a
clockevent device's rate is going to change dynamically and thus, the
ratio of ns to ticks ceases to stay invariant.

Make the blackfin arch's clockevent driver initialize these fields
properly.

This patch alone doesn't introduce any change in functionality as the
clockevents core still looks exclusively at the (untouched) ->min_delta_ns
and ->max_delta_ns. As soon as this has changed, a followup patch will
purge the initialization of ->min_delta_ns and ->max_delta_ns from this
driver.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven Miao <realmz6@gmail.com>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2017-04-14 13:11:18 -07:00
Peter Zijlstra b5effd3815 debug: Fix __bug_table[] in arch linker scripts
The kbuild test robot reported this build failure on a number
of architectures:

 >         make.cross ARCH=arm
 >    lib/lib.a(bug.o): In function `find_bug':
 > >> lib/bug.c:135: undefined reference to `__start___bug_table'
 > >> lib/bug.c:135: undefined reference to `__stop___bug_table'

Caused by:

  19d436268d ("debug: Add _ONCE() logic to report_bug()")

Which moved the BUG_TABLE from RO_DATA_SECTION() to RW_DATA_SECTION(),
but a number of architectures don't use RW_DATA_SECTION(), so they
ended up with no __bug_table[] ...

Ideally all those would use RW_DATA_SECTION() in their linker scripts,
but that's for another day.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20170330154927.o6qmgfp4bdhrajbm@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-03 10:22:40 +02:00
Al Viro 50e9ab915a bfin: switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:23:26 -04:00
Al Viro 72d6f65dd7 blackfin: switch to generic extable.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:23:26 -04:00
Al Viro db68ce10c4 new helper: uaccess_kernel()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 16:43:25 -04:00
Al Viro af1d5b37d6 uaccess: drop duplicate includes from asm/uaccess.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-05 21:57:49 -05:00
Al Viro 5e6039d8a3 uaccess: move VERIFY_{READ,WRITE} definitions to linux/uaccess.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-05 20:40:25 -05:00
Ingo Molnar 68e21be291 sched/headers: Move task->mm handling methods to <linux/sched/mm.h>
Move the following task->mm helper APIs into a new header file,
<linux/sched/mm.h>, to further reduce the size and complexity
of <linux/sched.h>.

Here are how the APIs are used in various kernel files:

  # mm_alloc():
  arch/arm/mach-rpc/ecard.c
  fs/exec.c
  include/linux/sched/mm.h
  kernel/fork.c

  # __mmdrop():
  arch/arc/include/asm/mmu_context.h
  include/linux/sched/mm.h
  kernel/fork.c

  # mmdrop():
  arch/arm/mach-rpc/ecard.c
  arch/m68k/sun3/mmu_emu.c
  arch/x86/mm/tlb.c
  drivers/gpu/drm/amd/amdkfd/kfd_process.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/hw/hfi1/file_ops.c
  drivers/vfio/vfio_iommu_spapr_tce.c
  fs/exec.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/mmu_notifier.h
  include/linux/sched/mm.h
  kernel/fork.c
  kernel/futex.c
  kernel/sched/core.c
  mm/khugepaged.c
  mm/ksm.c
  mm/mmu_context.c
  mm/mmu_notifier.c
  mm/oom_kill.c
  virt/kvm/kvm_main.c

  # mmdrop_async_fn():
  include/linux/sched/mm.h

  # mmdrop_async():
  include/linux/sched/mm.h
  kernel/fork.c

  # mmget_not_zero():
  fs/userfaultfd.c
  include/linux/sched/mm.h
  mm/oom_kill.c

  # mmput():
  arch/arc/include/asm/mmu_context.h
  arch/arc/kernel/troubleshoot.c
  arch/frv/mm/mmu-context.c
  arch/powerpc/platforms/cell/spufs/context.c
  arch/sparc/include/asm/mmu_context_32.h
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/gpu/drm/i915/i915_gem_userptr.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/core/uverbs_main.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/exec.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  fs/proc/task_nommu.c
  fs/userfaultfd.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/events/uprobes.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/oom_kill.c
  mm/process_vm_access.c
  mm/rmap.c
  mm/swapfile.c
  mm/util.c
  virt/kvm/async_pf.c

  # mmput_async():
  include/linux/sched/mm.h
  kernel/fork.c
  mm/oom_kill.c

  # get_task_mm():
  arch/arc/kernel/troubleshoot.c
  arch/powerpc/platforms/cell/spufs/context.c
  drivers/android/binder.c
  drivers/gpu/drm/etnaviv/etnaviv_gem.c
  drivers/infiniband/core/umem.c
  drivers/infiniband/core/umem_odp.c
  drivers/infiniband/hw/mlx4/main.c
  drivers/infiniband/hw/mlx5/main.c
  drivers/infiniband/hw/usnic/usnic_uiom.c
  drivers/iommu/amd_iommu_v2.c
  drivers/iommu/intel-svm.c
  drivers/lguest/lguest_user.c
  drivers/misc/cxl/fault.c
  drivers/misc/mic/scif/scif_rma.c
  drivers/oprofile/buffer_sync.c
  drivers/vfio/vfio_iommu_type1.c
  drivers/vhost/vhost.c
  drivers/xen/gntdev.c
  fs/proc/array.c
  fs/proc/base.c
  fs/proc/task_mmu.c
  include/linux/sched/mm.h
  kernel/cpuset.c
  kernel/events/core.c
  kernel/exit.c
  kernel/fork.c
  kernel/ptrace.c
  kernel/sys.c
  kernel/trace/trace_output.c
  kernel/tsacct.c
  mm/memcontrol.c
  mm/memory.c
  mm/mempolicy.c
  mm/migrate.c
  mm/mmu_notifier.c
  mm/nommu.c
  mm/util.c

  # mm_access():
  fs/proc/base.c
  include/linux/sched/mm.h
  kernel/fork.c
  mm/process_vm_access.c

  # mm_release():
  arch/arc/include/asm/mmu_context.h
  fs/exec.c
  include/linux/sched/mm.h
  include/uapi/linux/sched.h
  kernel/exit.c
  kernel/fork.c

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-03 01:43:28 +01:00
Ingo Molnar 589ee62844 sched/headers: Prepare to remove the <linux/mm_types.h> dependency from <linux/sched.h>
Update code that relied on sched.h including various MM types for them.

This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:37 +01:00
Ingo Molnar 68db0cf106 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task_stack.h>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:36 +01:00
Ingo Molnar 299300258d sched/headers: Prepare for new header dependencies before moving code to <linux/sched/task.h>
We are going to split <linux/sched/task.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/task.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:35 +01:00
Ingo Molnar b17b01533b sched/headers: Prepare for new header dependencies before moving code to <linux/sched/debug.h>
We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:34 +01:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00