Commit Graph

201 Commits

Author SHA1 Message Date
Chandra Seetharaman 83e782e1a1 xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead,
start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and
PQUOTA respectively.

On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD.

Read and write of the superblock does the conversion from *OQUOTA*
to *[PG]QUOTA*.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 17:39:22 -05:00
Jie Liu 39a45d8463 xfs: Remove XFS_MOUNT_RETERR
XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if
mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)"
branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so
we always be emitting a warning and returning an error.

Hence, we can remove it and get rid of a couple of redundant
check up against it at xfs_upate_alignment().

Thanks Dave Chinner for the suggestions of simplify the code
in xfs_parseargs().

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-19 14:54:17 -05:00
Jie Liu 34d7f603b9 xfs: Don't keep silent if sunit/swidth can not be changed via mount
As per the mount man page, sunit and swidth can be changed via
mount options.  For XFS, on the face of it, those options seems
works if the specified alignments is properly, e.g.
# mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt
# mount | grep sdb1
/dev/sdb1 on /mnt type xfs (rw,sunit=4096,swidth=8192)

However, neither sunit nor swidth is shown from the xfs_info output.
# xfs_info /mnt
meta-data=/dev/sdb1    isize=256    agcount=4, agsize=262144 blks
         =             sectsz=512   attr=2
data     =             bsize=4096   blocks=1048576, imaxpct=25
         =             sunit=0      swidth=0 blks
		       ^^^^^^^^^^^^^^^^^^^^^^^^^^
naming   =version 2    bsize=4096   ascii-ci=0
log      =internal     bsize=4096   blocks=2560, version=2
         =             sectsz=512   sunit=0 blks, lazy-count=1
realtime =none         extsz=4096   blocks=0, rtextents=0

The reason is that the alignment can only be changed if the relevant
super block is already configured with alignments, otherwise, the
given value is silently ignored.

With this fix, the attempt to mount a storage without strip alignment
setup on a super block will get an error with a warning in syslog to
indicate the true cause, e.g.
# mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
	dmesg | tail  or so
.......
XFS (sdb1): cannot change alignment: superblock does not support data
alignment

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Tinguely <tinguely@sgi.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-17 17:49:02 -05:00
Dave Chinner 34510185ab xfs: don't emit v5 superblock warnings on write
We write the superblock every 30s or so which results in the
verifier being called. Right now that results in this output
every 30s:

XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled!
Use of these features in this kernel is at your own risk!

And spamming the logs.

We don't need to check for whether we support v5 superblocks or
whether there are feature bits we don't support set as these are
only relevant when we first mount the filesytem. i.e. on superblock
read. Hence for the write verification we can just skip all the
checks (and hence verbose output) altogether.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-05-30 12:24:19 -05:00
Dave Chinner e721f504cf xfs: implement extended feature masks
The version 5 superblock has extended feature masks for compatible,
incompatible and read-only compatible feature sets. Implement the
masking and mount-time checking for these feature masks.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-27 13:05:18 -05:00
Dave Chinner 04a1e6c5b2 xfs: add CRC checks to the superblock
With the addition of CRCs, there is such a wide and varied change to
the on disk format that it makes sense to bump the superblock
version number rather than try to use feature bits for all the new
functionality.

This commit introduces all the new superblock fields needed for all
the new functionality: feature masks similar to ext4, separate
project quota inodes, a LSN field for recovery and the CRC field.

This commit does not bump the superblock version number, however.
That will be done as a separate commit at the end of the series
after all the new functionality is present so we switch it all on in
one commit. This means that we can slowly introduce the changes
without them being active and hence maintain bisectability of the
tree.

This patch is based on a patch originally written by myself back
from SGI days, which was subsequently modified by Christoph Hellwig.
There is relatively little of that patch remaining, but the history
of the patch still should be acknowledged here.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-27 13:03:12 -05:00
Jeff Liu 5166ab0655 xfs: make use of XFS_SB_LOG_RES() at xfs_mount_log_sb()
Make use of XFS_SB_LOG_RES() at xfs_mount_log_sb().

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-01 14:55:08 -06:00
Jeff Liu e457274b60 xfs: make use of XFS_SB_LOG_RES() at xfs_log_sbcount()
Make use of XFS_SB_LOG_RES() at xfs_log_sbcount().

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-01 14:47:18 -06:00
Jeff Liu b0c10b983a xfs: calculate XFS_TRANS_QM_SBCHANGE space log reservation at mount time
The transaction log space for clearing/reseting the quota flags
is calculated out at runtime, this patch can figure it out at
mount time.

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-01 14:40:17 -06:00
Eric Sandeen aeb4f20a02 xfs: Do not return EFSCORRUPTED when filesystem probe finds no XFS magic
9802182 changed the return value from EWRONGFS (aka EINVAL)
to EFSCORRUPTED which doesn't seem to be handled properly by
the root filesystem probe.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-01-16 17:33:53 -06:00
Dave Chinner 1813dd6405 xfs: convert buffer verifiers to an ops structure.
To separate the verifiers from iodone functions and associate read
and write verifiers at the same time, introduce a buffer verifier
operations structure to the xfs_buf.

This avoids the need for assigning the write verifier, clearing the
iodone function and re-running ioend processing in the read
verifier, and gets rid of the nasty "b_pre_io" name for the write
verifier function pointer. If we ever need to, it will also be
easier to add further content specific callbacks to a buffer with an
ops structure in place.

We also avoid needing to export verifier functions, instead we
can simply export the ops structures for those that are needed
outside the function they are defined in.

This patch also fixes a directory block readahead verifier issue
it exposed.

This patch also adds ops callbacks to the inode/alloc btree blocks
initialised by growfs. These will need more work before they will
work with CRCs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:12 -06:00
Dave Chinner b0f539de9f xfs: connect up write verifiers to new buffers
Metadata buffers that are read from disk have write verifiers
already attached to them, but newly allocated buffers do not. Add
appropriate write verifiers to all new metadata buffers.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:09 -06:00
Dave Chinner 612cfbfe17 xfs: add pre-write metadata buffer verifier callbacks
These verifiers are essentially the same code as the read verifiers,
but do not require ioend processing. Hence factor the read verifier
functions and add a new write verifier wrapper that is used as the
callback.

This is done as one large patch for all verifiers rather than one
patch per verifier as the change is largely mechanical. This
includes hooking up the write verifier via the read verifier
function.

Hooking up the write verifier for buffers obtained via
xfs_trans_get_buf() will be done in a separate patch as that touches
code in many different places rather than just the verifier
functions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:35:02 -06:00
Dave Chinner 98021821a5 xfs: verify superblocks as they are read from disk
Add a superblock verify callback function and pass it into the
buffer read functions. Remove the now redundant verification code
that is currently in use.

Adding verification shows that secondary superblocks never have
their "sb_inprogress" flag cleared by mkfs.xfs, so when validating
the secondary superblocks during a grow operation we have to avoid
checking this field. Even if we fix mkfs, we will still have to
ignore this field for verification purposes unless a version of mkfs
that does not have this bug was used.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:07 -06:00
Dave Chinner eab4e63368 xfs: uncached buffer reads need to return an error
With verification being done as an IO completion callback, different
errors can be returned from a read. Uncached reads only return a
buffer or NULL on failure, which means the verification error cannot
be returned to the caller.

Split the error handling for these reads into two - a failure to get
a buffer will still return NULL, but a read error will return a
referenced buffer with b_error set rather than NULL. The caller is
responsible for checking the error state of the buffer returned.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:05 -06:00
Dave Chinner c3f8fc73ac xfs: make buffer read verication an IO completion function
Add a verifier function callback capability to the buffer read
interfaces.  This will be used by the callers to supply a function
that verifies the contents of the buffer when it is read from disk.
This patch does not provide callback functions, but simply modifies
the interfaces to allow them to be called.

The reason for adding this to the read interfaces is that it is very
difficult to tell fom the outside is a buffer was just read from
disk or whether we just pulled it out of cache. Supplying a callbck
allows the buffer cache to use it's internal knowledge of the buffer
to execute it only when the buffer is read from disk.

It is intended that the verifier functions will mark the buffer with
an EFSCORRUPTED error when verification fails. This allows the
reading context to distinguish a verification error from an IO
error, and potentially take further actions on the buffer (e.g.
attempt repair) based on the error reported.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15 21:34:02 -06:00
Brian Foster 579b62faa5 xfs: add background scanning to clear eofblocks inodes
Create a new mount workqueue and delayed_work to enable background
scanning and freeing of eofblocks inodes. The scanner kicks in once
speculative preallocation occurs and stops requeueing itself when
no eofblocks inodes exist.

The scan interval is based on the new
'speculative_prealloc_lifetime' tunable (default to 5m). The
background scanner performs unfiltered, best effort scans (which
skips inodes under lock contention or with a dirty cache mapping).

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-08 15:34:59 -06:00
Dave Chinner 6d8b79cfca xfs: rename xfs_sync.[ch] to xfs_icache.[ch]
xfs_sync.c now only contains inode reclaim functions and inode cache
iteration functions. It is not related to sync operations anymore.
Rename to xfs_icache.c to reflect it's contents and prepare for
consolidation with the other inode cache file that exists
(xfs_iget.c).

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 13:40:09 -05:00
Dave Chinner cf2931db2d xfs: Bring some sanity to log unmounting
When unmounting the filesystem, there are lots of operations that
need to be done in a specific order, and they are spread across
across a couple of functions. We have to drain the AIL before we
write the unmount record, and we have to shut down the background
log work before we do either of them.

But this is all split haphazardly across xfs_unmountfs() and
xfs_log_unmount(). Move all the AIL flushing and log manipulations
to xfs_log_unmount() so that the responisbilities of each function
is clear and the operations they perform obvious.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:57:10 -05:00
Dave Chinner 7e18530bef xfs: rationalise xfs_mount_wq users
Instead of starting and stopping background work on the xfs_mount_wq
all at the same time, separate them to where they really are needed
to start and stop.

The xfs_sync_worker, only needs to be started after all the mount
processing has completed successfully, while it needs to be stopped
before the log is unmounted.

The xfs_reclaim_worker is started on demand, and can be
stopped before the unmount process does it's own inode reclaim pass.

The xfs_flush_inodes work is run on demand, and so we really only
need to ensure that it has stopped running before we start
processing an unmount, freeze or remount,ro.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-17 11:25:06 -05:00
Carlos Maiolino 2d2194f61f xfs: reduce code duplication handling inode32/64 options
Add xfs_set_inode32() to be used to enable inode32 allocation mode. this
will reduce the amount of duplicated code needed to mount/remount a
filesystem with inode32 option.  This patch also changes
xfs_set_inode64() to return the maximum AG number that inodes can be
allocated instead of set mp->m_maxagi by itself, so that the behaviour
is the same as xfs_set_inode32().  This simplifies code that calls these
functions and needs to know the maximum AG that inodes can be allocated
in.

Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-09-26 15:56:33 -05:00
Linus Torvalds a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Jan Kara d9457dc056 xfs: Convert to new freezing code
Generic code now blocks all writers from standard write paths. So we add
blocking of all writers coming from ioctl (we get a protection of ioctl against
racing remount read-only as a bonus) and convert xfs_file_aio_write() to a
non-racy freeze protection. We also keep freeze protection on transaction
start to block internal filesystem writes such as removal of preallocated
blocks.

CC: Ben Myers <bpm@sgi.com>
CC: Alex Elder <elder@kernel.org>
CC: xfs@oss.sgi.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-31 09:45:48 +04:00
Mark Tinguely 9a57fa8ee7 xfs: wait for the write the superblock on unmount
v2: Add the xfs_buf_lock to xfs_quiesce_attr().
    Add explaination why xfs_buf_lock() is used to wait for write.

xfs_wait_buftarg() does not wait for the completion of the write of the
uncached superblock. This write can race with the shutdown of the log
and causes a panic if the write does not win the race.

During the log write, xfsaild_push() will lock the buffer and set the
XBF_ASYNC flag. Because the XBF_FLAG is set, complete() is not performed
on the buffer's iowait entry, we cannot call xfs_buf_iowait() to wait
for the write to complete. The buffer's lock is held until the write is
complete, so we can block on a xfs_buf_lock() request to be notified
that the write is complete.

Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-29 16:34:19 -05:00
Dave Chinner d2c2819117 xfs: m_maxioffset is redundant
The m_maxioffset field in the struct xfs_mount contains the same
value as the superblock s_maxbytes field. There is no need to carry
two copies of this limit around, so use the VFS superblock version.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14 12:28:22 -05:00
Dave Chinner d4f3512b08 xfs: flush outstanding buffers on log mount failure
When we fail to mount the log in xfs_mountfs(), we tear down all the
infrastructure we have already allocated. However, the process of
mounting the log may have progressed to the point of reading,
caching and modifying buffers in memory. Hence before we can free
all the infrastructure, we have to flush and remove all the buffers
from memory.

Problem first reported by Eric Sandeen, later a different incarnation
was reported by Ben Myers.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:21:02 -05:00
Dave Chinner 2a0ec1d9ed xfs: move xfs_get_extsz_hint() and kill xfs_rw.h
The only thing left in xfs_rw.h is a function prototype for an inode
function.  Move that to xfs_inode.h, and kill xfs_rw.h.

Also move the function implementing the prototype from xfs_rw.c to
xfs_inode.c so we only have one function left in xfs_rw.c

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:58 -05:00
Dave Chinner e70b73f84f xfs: clean up buffer get/read call API
The xfs_buf_get/read API is not consistent in the units it uses, and
does not use appropriate or consistent units/types for the
variables.

Convert the API to use disk addresses and block counts for all
buffer get and read calls. Use consistent naming for all the
functions and their declarations, and convert the internal functions
to use disk addresses and block counts to avoid need to convert them
from one type to another and back again.

Fix all the callers to use disk addresses and block counts. In many
cases, this removes an additional conversion from the function call
as the callers already have a block count.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:45 -05:00
Christoph Hellwig 211e4d434b xfs: implement freezing by emptying the AIL
Now that we write back all metadata either synchronously or through
the AIL we can simply implement metadata freezing in terms of
emptying the AIL.

The implementation for this is fairly simply and straight-forward:
A new routine is added that asks the xfsaild to push the AIL to the
end and waits for it to complete and send a wakeup. The routine will
then loop if the AIL is not actually empty, and continue to do so
until the AIL is compeltely empty.

We keep an inode reclaim pass in the freeze process to avoid having
memory pressure have to reclaim inodes that require dirtying the
filesystem to be reclaimed after the freeze has completed. This
means we can also treat unmount in the exact same way as freeze.

As an upside we can now remove the radix tree based inode writeback
and xfs_unmountfs_writesb.

[ Dave Chinner:
	- Cleaned up commit message.
	- Added inode reclaim passes back into freeze.
	- Cleaned up wakeup mechanism to avoid the use of a new
	  sleep counter variable. ]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14 16:20:27 -05:00
Chandra Seetharaman 6bd92a239f Change xfs_sb_from_disk() interface to take a mount pointer
Change xfs_sb_from_disk() interface to take a mount pointer
instead of a superblock pointer.

This is to print mount point specific error messages in future
fixes.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-03 11:21:33 -06:00
Mitsuo Hayasaka 021000e59c xfs: show uuid when mount fails due to duplicate uuid
When a system tries to mount a filesystem (FS) using UUID, the xfs
returns -EINVAL and shows a message if a FS with the same UUID has
been already mounted. It is useful to output the duplicate UUID
with it.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Ben Myers <bpm@sgi.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
2012-01-31 13:37:33 -06:00
Christoph Hellwig a9add83e5a xfs: remove XFS_bflush
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:11 -05:00
Christoph Hellwig 901796afca xfs: clean up xfs_ioerror_alert
Instead of passing the block number and mount structure explicitly
get them off the bp and fix make the argument order more natural.

Also move it to xfs_buf.c and stop printing the device name given
that we already get the fs name as part of xfs_alert, and we know
what device is operates on because of the caller that gets printed,
finally rename it to xfs_buf_ioerror_alert and pass __func__ as
argument where it makes sense.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:10 -05:00
Christoph Hellwig 87c7bec7fc xfs: fix buffer flushing during unmount
The code to flush buffers in the umount code is a bit iffy: we first
flush all delwri buffers out, but then might be able to queue up a
new one when logging the sb counts.  On a normal shutdown that one
would get flushed out when doing the synchronous superblock write in
xfs_unmountfs_writesb, but we skip that one if the filesystem has
been shut down.

Fix this by moving the delwri list flushing until just before unmounting
the log, and while we're at it also remove the superflous delwri list
and buffer lru flusing for the rt and log device that can never have
cached or delwri buffers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Tested-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:15:09 -05:00
Christoph Hellwig 61551f1ee5 xfs: call xfs_buf_delwri_queue directly
Unify the ways we add buffers to the delwri queue by always calling
xfs_buf_delwri_queue directly.  The xfs_bdwrite functions is removed and
opencoded in its callers, and the two places setting XBF_DELWRI while a
buffer is locked and expecting xfs_buf_unlock to pick it up are converted
to call xfs_buf_delwri_queue directly, too.  Also replace the
XFS_BUF_UNDELAYWRITE macro with direct calls to xfs_buf_delwri_dequeue
to make the explicit queuing/dequeuing more obvious.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11 21:14:59 -05:00
Alex Elder 2ddb4e9406 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux 2011-08-08 07:06:24 -05:00
Al Viro abbede1b3a xfs: get rid of open-coded S_ISREG(), etc.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-26 15:05:16 -04:00
Chandra Seetharaman 49074c069c xfs: Remove the macro XFS_BUF_TARGET
Remove the definition and usages of the macro XFS_BUF_TARGET

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-25 15:03:31 -05:00
Chandra Seetharaman 72790aa119 xfs: Remove macro XFS_BUF_HOLD
Remove the definition and usage of the macro XFS_BUF_HOLD

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-25 15:03:06 -05:00
Chandra Seetharaman adab0f67d1 xfs: Remove the second parameter to xfs_sb_count()
Remove the second parameter to xfs_sb_count() since all callers of
the function set them.

Also, fix the header comment regarding it being called periodically.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-20 18:35:03 -05:00
Christoph Hellwig ea15ab3cdd xfs: remove the dead QUOTADEBUG code
Remove the dead hash table test rid which has been rotting away under
QUOTADEBUG, including some code that was compiled for normal debug
builds, but not actually called without QUOTADEBUG, and enable a few
cheap debug checks that were hidden under QUOTADEBUG for normal
debug builds.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-13 13:43:50 +02:00
Alex Elder b2ce397400 Revert "xfs: fix filesystsem freeze race in xfs_trans_alloc"
This reverts commit 7a249cf83d.

That commit created a situation that could lead to a filesystem
hang.  As Dave Chinner pointed out, xfs_trans_alloc() could hold a
reference to m_active_trans (i.e., keep it non-zero) and then wait
for SB_FREEZE_TRANS to complete.  Meanwhile a filesystem freeze
request could set SB_FREEZE_TRANS and then wait for m_active_trans
to drop to zero.  Nobody benefits from this sequence of events...

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-11 10:21:03 -05:00
Eric Sandeen c0e090ced2 xfs: consolidate & clarify mount sanity checks
Pavol pointed out that there is one silent error case in the mount
path, and that others are rather uninformative.

I've taken Pavol's suggested patch and extended it a bit to also:

* fix a message which says "turned off" but actually errors out
* consolidate the vaguely differentiated "SB sanity check [12]"
  messages, and hexdump the superblock for analysis

Original-patch-by: Pavol Gono <Pavol.Gono@siemens.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-07-08 11:32:51 -05:00
Christoph Hellwig 0c842ad46a xfs: clean up buffer locking helpers
Rename xfs_buf_cond_lock and reverse it's return value to fit most other
trylock operations in the Kernel and XFS (with the exception of down_trylock,
after which xfs_buf_cond_lock was modelled), and replace xfs_buf_lock_val
with an xfs_buf_islocked for use in asserts, or and opencoded variant in
tracing.  remove the XFS_BUF_* wrappers for all the locking helpers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-08 14:36:19 +02:00
Christoph Hellwig 7a249cf83d xfs: fix filesystsem freeze race in xfs_trans_alloc
As pointed out by Jan xfs_trans_alloc can race with a concurrent filesystem
freeze when it sleeps during the memory allocation.  Fix this by moving the
wait_for_freeze call after the memory allocation.  This means moving the
freeze into the low-level _xfs_trans_alloc helper, which thus grows a new
argument.  Also fix up some comments in that area while at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <david@fromorbit.com>
2011-07-08 14:34:42 +02:00
David Sterba 45c51b9994 xfs: cleanup duplicate initializations
follow these guidelines:
- leave initialization in the declaration block if it fits the line
- move to the code where it's more suitable ('for' init block)

The last chunk was modified from David's original to be a correct
fix for what appeared to be a duplicate initialization.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-04-28 13:25:29 -05:00
Dave Chinner 0b932cccbd xfs: Convert remaining cmn_err() callers to new API
Once converted, kill the remainder of the cmn_err() interface.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 10:08:35 +11:00
Dave Chinner 5348778699 xfs: convert xfs_fs_cmn_err to new error logging API
Continue to clean up the error logging code by converting all the
callers of xfs_fs_cmn_err() to the new API. Once done, remove the
unused old API function.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 10:05:35 +11:00
Dave Chinner af34e09da4 xfs: kill xfs_fs_mount_cmn_err() macro
The xfs_fs_mount_cmn_err() hides a simple check as to whether the
mount path should output an error or not. Remove the macro and open
code the check.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2011-03-07 10:04:35 +11:00
Dave Chinner 1a427ab0c1 xfs: convert pag_ici_lock to a spin lock
now that we are using RCU protection for the inode cache lookups,
the lock is only needed on the modification side. Hence it is not
necessary for the lock to be a rwlock as there are no read side
holders anymore. Convert it to a spin lock to reflect it's exclusive
nature.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-12-16 17:08:41 +11:00