Commit Graph

2693 Commits

Author SHA1 Message Date
Selvan Mani 836413e8c7 mtip32xx: Fix padding issue
Hi Jens,

Another tiny patch.

Removed __packed before the struct smart_attr and added __packed at end of
the structure to fix padding issue.

Signed-off-by: Selvan Mani  <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Ed Cashin 11cfb6ff73 aoe: avoid running request handler on plugged queue
Calling the request handler directly on a plugged queue defeats
the performance improvements provided by the plugging mechanism.
Use the __blk_run_queue function instead of calling the request
handler directly, so that we don't interfere with the block
layer's ability to plug the queue.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Wei Yongjun 298d80152c mtip32xx: fix potential NULL pointer dereference in mtip_timeout_function()
The dereference to port should be moved below the NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Jens Axboe 7c5d62388e mtip32xx: fix shift larger than type warning
If we're building a 32-bit kernel and CONFIG_LBADF isn't set,
sector_t is 32-bits wide. The shifts by 32 and 40 are thus
larger than we support.

Cast the sector offset to a u64 to avoid these warnings.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Selvan Mani 4b9e884523 mtip32xx: Fix incorrect mask used for erase mode
Previous commit use value 3 for erasemode mask.
Changing the mask to correct value to 2

Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Selvan Mani eda4531492 mtip32xx: Fix to make lba address correct in big-endian systems
Earlier lba address was assigned directly to lba_low and lba_low_ex,
which would result in a different number (bytes reversed) in
big-endian systems. Now assigning lba address byte-by-byte to fis.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:55 +01:00
Selvan Mani 3208795e61 mtip32xx: fix potential crash on SEC_ERASE_UNIT
The mtip driver lifted this code from elsewhere and then added a special
handling check for SEC_ERASE_UNIT. If the caller tries to do a security
erase but passes no output data for the command then outbuf is not
allocated and the driver duly explodes.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:54 +01:00
Jiri Kosina eac7cc52c6 floppy: destroy floppy workqueue before cleaning up the queue
We need to first destroy the floppy_wq workqueue before cleaning up
the queue. Otherwise we might race with still pending work with the
workqueue, but all the block queue already gone. This might lead to
various oopses, such as

 CPU 0
 Pid: 6, comm: kworker/u:0 Not tainted 3.7.0-rc4 #1 Bochs Bochs
 RIP: 0010:[<ffffffff8134eef5>]  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
 RSP: 0000:ffff88000dc7dd88  EFLAGS: 00010092
 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: ffff88000f602688 RSI: ffffffff81fd95d8 RDI: 6b6b6b6b6b6b6b6b
 RBP: ffff88000dc7dd98 R08: ffffffff81fd95c8 R09: 0000000000000000
 R10: ffffffff81fd9480 R11: 0000000000000001 R12: 6b6b6b6b6b6b6b6b
 R13: ffff88000dc7dfd8 R14: ffff88000dc7dfd8 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffffffff81e21000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000000000000000 CR3: 0000000001e11000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Process kworker/u:0 (pid: 6, threadinfo ffff88000dc7c000, task ffff88000dc5ecc0)
 Stack:
  0000000000000000 0000000000000000 ffff88000dc7ddb8 ffffffff8134efee
  ffff88000dc7ddb8 0000000000000000 ffff88000dc7dde8 ffffffff814aef3c
  ffffffff81e75d80 ffff88000dc0c640 ffff88000fbfb000 ffffffff814aed90
 Call Trace:
  [<ffffffff8134efee>] blk_fetch_request+0xe/0x30
  [<ffffffff814aef3c>] redo_fd_request+0x1ac/0x400
  [<ffffffff814aed90>] ? start_motor+0x130/0x130
  [<ffffffff8106b526>] process_one_work+0x136/0x450
  [<ffffffff8106af65>] ? manage_workers+0x205/0x2e0
  [<ffffffff8106bb6d>] worker_thread+0x14d/0x420
  [<ffffffff8106ba20>] ? rescuer_thread+0x1a0/0x1a0
  [<ffffffff8107075a>] kthread+0xba/0xc0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
  [<ffffffff818b553a>] ret_from_fork+0x7a/0xb0
  [<ffffffff810706a0>] ? __kthread_parkme+0x80/0x80
 Code: 0f 84 c0 00 00 00 83 f8 01 0f 85 e2 00 00 00 81 4b 40 00 00 80 00 48 89 df e8 58 f8 ff ff be fb ff ff ff
 fe ff ff <49> 8b 1c 24 49 39 dc 0f 85 2e ff ff ff 41 0f b6 84 24 28 04 00
 RIP  [<ffffffff8134eef5>] blk_peek_request+0xd5/0x1c0
  RSP <ffff88000dc7dd88>

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-11-23 14:32:54 +01:00
Dave Chinner a1ecac3b06 loop: Make explicit loop device destruction lazy
xfstests has always had random failures of tests due to loop devices
failing to be torn down and hence leaving filesytems that cannot be
unmounted. This causes test runs to immediately stop.

Over the past 6 or 7 years we've added hacks like explicit unmount
-d commands for loop mounts, losetup -d after unmount -d fails, etc,
but still the problems persist.  Recently, the frequency of loop
related failures increased again to the point that xfstests 259 will
reliably fail with a stray loop device that was not torn down.

That is despite the fact the test is above as simple as it gets -
loop 5 or 6 times running mkfs.xfs with different paramters:

        lofile=$(losetup -f)
        losetup $lofile "$testfile"
        "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!"
        sync
        losetup -d $lofile

And losteup -d $lofile is failing with EBUSY on 1-3 of these loops
every time the test is run.

Turns out that blkid is running simultaneously with losetup -d, and
so it sees an elevated reference count and returns EBUSY.  But why
is blkid running? It's obvious, isn't it? udev has decided to try
and find out what is on the block device as a result of a creation
notification. And it is racing with mkfs, so might still be scanning
the device when mkfs finishes and we try to tear it down.

So, make losetup -d force autoremove behaviour. That is, when the
last reference goes away, tear down the device. xfstests wants it
*gone*, not causing random teardown failures when we know that all
the operations the tests have specifically run on the device have
completed and are no longer referencing the loop device.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:37:31 +01:00
Selvan Mani 4453bc88f0 mtip32xx:Added appropriate timeout value for secure erase
Added appropriate timeout value for secure erase based on identify device data

Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:37:27 +01:00
Oliver Chick 1f999572f2 xen/blkback: Change xen_vbd's flush_support and discard_secure to have type unsigned int, rather than bool
Changing the type of bdev parameters to be unsigned int :1, rather than bool.
This is more consistent with the types of other features in the block drivers.

Signed-off-by: Oliver Chick <oliver.chick@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:37:20 +01:00
Akinobu Mita b7010ede43 cciss: select CONFIG_CHECK_SIGNATURE
The patch cciss-use-check_signature.patch in -mm tree introduced
a build error:

drivers/built-in.o: In function `CISS_signature_present':
drivers/block/cciss.c:4270: undefined reference to `check_signature'

Add missing CONFIG_CHECK_SIGNATURE to fix this issue.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Fengguang Wu <wfg@linux.intel.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:37:00 +01:00
Wei Yongjun 2541aa799f cciss: remove unneeded memset()
The memory return by kzalloc() or kmem_cache_zalloc() has already be set
to zero, so remove useless memset(0).

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:58 +01:00
Wei Yongjun 654dbef214 xen/blkback: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30 08:36:27 +01:00
Herton Ronaldo Krzesinski 1a4ae43e4f floppy: remove dr, reuse drive on do_floppy_init
This is a small cleanup, that also may turn error handling of
unitialized disks more readable. We don't need a separate variable to
track allocated disks, remove dr and reuse drive variable instead.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:36:07 +01:00
Herton Ronaldo Krzesinski 8d3ab4ebfd floppy: use common function to check if floppies can be registered
The same checks to see if a drive can be or is registered are
repeated through the code, factor out the checks in a common function
and replace the repeated checks with it.

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:34:25 +01:00
Herton Ronaldo Krzesinski d60e7ec18c floppy: properly handle failure on add_disk loop
On floppy initialization, if something failed inside the loop we call
add_disk, there was no cleanup of previous iterations in the error
handling.

Cc: stable@vger.kernel.org
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:34:25 +01:00
Herton Ronaldo Krzesinski 238ab78469 floppy: do put_disk on current dr if blk_init_queue fails
If blk_init_queue fails, we do not call put_disk on the current dr
(dr is decremented first in the error handling loop).

Cc: stable@vger.kernel.org
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:34:25 +01:00
Herton Ronaldo Krzesinski b54e1f8889 floppy: don't call alloc_ordered_workqueue inside the alloc_disk loop
Since commit 070ad7e ("floppy: convert to delayed work and single-thread
wq"), we end up calling alloc_ordered_workqueue multiple times inside
the loop, which shouldn't be intended. Besides the leak, other side
effect in the current code is if blk_init_queue fails, we would end up
calling unregister_blkdev even if we didn't call yet register_blkdev.

Just moved the allocation of floppy_wq before the loop, and adjusted the
code accordingly.

Cc: stable@vger.kernel.org # 3.5+
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-30 08:34:24 +01:00
Konrad Rzeszutek Wilk 2911758f14 xen/blkback: Fix compile warning
drivers/block/xen-blkback/xenbus.c:260:5: warning: symbol 'xenvbd_sysfs_addif' was not declared. Should it be static?
drivers/block/xen-blkback/xenbus.c:284:6: warning: symbol 'xenvbd_sysfs_delif' was not declared. Should it be static?

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30 08:32:43 +01:00
Kees Cook b8977285ec drivers/block: remove CONFIG_EXPERIMENTAL
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Asai Thambi S P <asamymuthupa@micron.com>
CC: Pete Zaitcev <zaitcev@redhat.com>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-10-23 22:30:38 +02:00
Linus Torvalds ce40be7a82 Merge branch 'for-3.7/core' of git://git.kernel.dk/linux-block
Pull block IO update from Jens Axboe:
 "Core block IO bits for 3.7.  Not a huge round this time, it contains:

   - First series from Kent cleaning up and generalizing bio allocation
     and freeing.

   - WRITE_SAME support from Martin.

   - Mikulas patches to prevent O_DIRECT crashes when someone changes
     the block size of a device.

   - Make bio_split() work on data-less bio's (like trim/discards).

   - A few other minor fixups."

Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton.  It is due to the VM no longer using a prio-tree (see commit
6b2dbba8b6ac: "mm: replace vma prio_tree with an interval tree").

So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.

* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
  block: makes bio_split support bio without data
  scatterlist: refactor the sg_nents
  scatterlist: add sg_nents
  fs: fix include/percpu-rwsem.h export error
  percpu-rw-semaphore: fix documentation typos
  fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
  blockdev: turn a rw semaphore into a percpu rw semaphore
  Fix a crash when block device is read and block size is changed at the same time
  block: fix request_queue->flags initialization
  block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
  block: ioctl to zero block ranges
  block: Make blkdev_issue_zeroout use WRITE SAME
  block: Implement support for WRITE SAME
  block: Consolidate command flag and queue limit checks for merges
  block: Clean up special command handling logic
  block/blk-tag.c: Remove useless kfree
  block: remove the duplicated setting for congestion_threshold
  block: reject invalid queue attribute values
  block: Add bio_clone_bioset(), bio_clone_kmalloc()
  block: Consolidate bio_alloc_bioset(), bio_kmalloc()
  ...
2012-10-11 09:04:23 +09:00
Linus Torvalds 7035cdf36d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
 "The bulk of this pull is a series from Alex that refactors and cleans
  up the RBD code to lay the groundwork for supporting the new image
  format and evolving feature set.  There are also some cleanups in
  libceph, and for ceph there's fixed validation of file striping
  layouts and a bugfix in the code handling a shrinking MDS cluster."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (71 commits)
  ceph: avoid 32-bit page index overflow
  ceph: return EIO on invalid layout on GET_DATALOC ioctl
  rbd: BUG on invalid layout
  ceph: propagate layout error on osd request creation
  libceph: check for invalid mapping
  ceph: convert to use le32_add_cpu()
  ceph: Fix oops when handling mdsmap that decreases max_mds
  rbd: update remaining header fields for v2
  rbd: get snapshot name for a v2 image
  rbd: get the snapshot context for a v2 image
  rbd: get image features for a v2 image
  rbd: get the object prefix for a v2 rbd image
  rbd: add code to get the size of a v2 rbd image
  rbd: lay out header probe infrastructure
  rbd: encapsulate code that gets snapshot info
  rbd: add an rbd features field
  rbd: don't use index in __rbd_add_snap_dev()
  rbd: kill create_snap sysfs entry
  rbd: define rbd_dev_image_id()
  rbd: define some new format constants
  ...
2012-10-08 06:38:18 +09:00
Linus Torvalds dc92b1f9ab Merge branch 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio changes from Rusty Russell:
 "New workflow: same git trees pulled by linux-next get sent straight to
  Linus.  Git is awkward at shuffling patches compared with quilt or mq,
  but that doesn't happen often once things get into my -next branch."

* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
  lguest: fix occasional crash in example launcher.
  virtio-blk: Disable callback in virtblk_done()
  virtio_mmio: Don't attempt to create empty virtqueues
  virtio_mmio: fix off by one error allocating queue
  drivers/virtio/virtio_pci.c: fix error return code
  virtio: don't crash when device is buggy
  virtio: remove CONFIG_VIRTIO_RING
  virtio: add help to CONFIG_VIRTIO option.
  virtio: support reserved vqs
  virtio: introduce an API to set affinity for a virtqueue
  virtio-ring: move queue_index to vring_virtqueue
  virtio_balloon: not EXPERIMENTAL any more.
  virtio-balloon: dependency fix
  virtio-blk: fix NULL checking in virtblk_alloc_req()
  virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
  virtio-blk: Add bio-based IO path for virtio-blk
  virtio: console: fix error handling in init() function
  tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
  tools: Add guest trace agent as a user tool
  virtio/console: Allocate scatterlist according to the current pipe size
  ...
2012-10-07 21:04:56 +09:00
Linus Torvalds f1c6872e49 Features:
* Allow a Linux guest to boot as initial domain and as normal guests
    on Xen on ARM (specifically ARMv7 with virtualized extensions).
    PV console, block and network frontend/backends are working.
 Bug-fixes:
  * Fix compile linux-next fallout.
  * Fix PVHVM bootup crashing.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQbJELAAoJEFjIrFwIi8fJSI4H/32qrQKyF5IIkFKHTN9FYDC1
 OxEGc4y47DIQpGUd/PgZ/i6h9Iyhj+I6pb4lCevykwgd0j83noepluZlCIcJnTfL
 HVXNiRIQKqFhqKdjTANxVM4APup+7Lqrvqj6OZfUuoxaZ3tSTLhabJ/7UXf2+9xy
 g2RfZtbSdQ1sukQ/A2MeGQNT79rh7v7PrYQUYSrqytjSjSLPTqRf75HWQ+eapIAH
 X3aVz8Tn6nTixZWvZOK7rAaD4awsFxGP6E46oFekB02f4x9nWHJiCZiXwb35lORb
 tz9F9td99f6N4fPJ9LgcYTaCPwzVnceZKqE9hGfip4uT+0WrEqDxq8QmBqI5YtI=
 =gxJD
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull ADM Xen support from Konrad Rzeszutek Wilk:

  Features:
   * Allow a Linux guest to boot as initial domain and as normal guests
     on Xen on ARM (specifically ARMv7 with virtualized extensions).  PV
     console, block and network frontend/backends are working.
  Bug-fixes:
   * Fix compile linux-next fallout.
   * Fix PVHVM bootup crashing.

  The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports
  ARMv7 platforms.

  The goal in implementing this architecture is to exploit the hardware
  as much as possible.  That means use as little as possible of PV
  operations (so no PV MMU) - and use existing PV drivers for I/Os
  (network, block, console, etc).  This is similar to how PVHVM guests
  operate in X86 platform nowadays - except that on ARM there is no need
  for QEMU.  The end result is that we share a lot of the generic Xen
  drivers and infrastructure.

  Details on how to compile/boot/etc are available at this Wiki:

    http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions

  and this blog has links to a technical discussion/presentations on the
  overall architecture:

    http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/

* tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits)
  xen/xen_initial_domain: check that xen_start_info is initialized
  xen: mark xen_init_IRQ __init
  xen/Makefile: fix dom-y build
  arm: introduce a DTS for Xen unprivileged virtual machines
  MAINTAINERS: add myself as Xen ARM maintainer
  xen/arm: compile netback
  xen/arm: compile blkfront and blkback
  xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree
  xen/arm: receive Xen events on ARM
  xen/arm: initialize grant_table on ARM
  xen/arm: get privilege status
  xen/arm: introduce CONFIG_XEN on ARM
  xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM
  xen/arm: Introduce xen_ulong_t for unsigned long
  xen/arm: Xen detection and shared_info page mapping
  docs: Xen ARM DT bindings
  xen/arm: empty implementation of grant_table arch specific functions
  xen/arm: sync_bitops
  xen/arm: page.h definitions
  xen/arm: hypercalls
  ...
2012-10-07 07:13:01 +09:00
Ed Cashin 322c9ec009 aoe: update aoe-internal version number to 50
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:30 +09:00
Ed Cashin 1ac9e60262 aoe: remove unused code
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:30 +09:00
Ed Cashin 08b6062351 aoe: make dynamic block minor numbers the default
Because udev use is so widespread, making the old static mapping the
default is too conservative, given the severe limitations it places on
usable AoE addresses.  Storage virtualization and larger shelves have made
the old limitations too confining.

These changes make the dynamic block device minor numbers the default,
removing the limitations on usable AoE addresses.

The static arrangement is still available with aoe_dyndevs=0, and the
aoe-stat tool from the userland aoetools package, the user space
counterpart to the aoe driver, recognizes the case where there is a
mismatch between the minor number in sysfs and the minor number in a
special device file.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:29 +09:00
Ed Cashin 7159e969d1 aoe: update and specify AoE address guards and error messages
In general, specific is better when it comes to messages about AoE usage
problems.  Also, explicit checks for the AoE broadcast addresses are
added.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:29 +09:00
Ed Cashin 4bcce1a355 aoe: retain static block device numbers for backwards compatibility
The old mapping between AoE target shelf and slot addresses and the block
device minor number is retained as a backwards-compatible feature, with a
new "aoe_dyndevs" module parameter available for enabling dynamic block
device minor numbers.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:29 +09:00
Ed Cashin 0c96621458 aoe: support more AoE addresses with dynamic block device minor numbers
The ATA over Ethernet protocol uses a major (shelf) and minor (slot)
address to identify a particular storage target.  These changes remove an
artificial limitation the aoe driver imposes on the use of AoE addresses.
For example, without these changes, the slot address has a maximum of 15,
but users commonly use slot numbers much greater than that.

The AoE shelf and slot address space is often used sparsely.  Instead of
using a static mapping between AoE addresses and the block device minor
number, the block device minor numbers are now allocated on demand.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:28 +09:00
Ed Cashin fea05a26c3 aoe: update copyright year in touched files
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:28 +09:00
Ed Cashin 7392fbe5ad aoe: update internal version number to 49
The internal version number of the aoe driver appears in a console message
when the driver loads and is usually obtained by the user with the
userland aoe-version tool, part of the aoetools.[1]

Although this patchset includes bugfixes backported from higher-numbered
versions published on the coraid.com website, it is a form of version 49.

1. http://aoetools.sourceforge.net/

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:27 +09:00
Ed Cashin b21faa25c6 aoe: remove unused code and add cosmetic improvements
This change removes some unused code and attempts to increase code
consistency.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:27 +09:00
Ed Cashin 1b86fda9ad aoe: increase net_device reference count while using it
This change eliminates the danger that the user could rmmod the driver for
a network interface that is being used for AoE by the aoe driver.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:27 +09:00
Ed Cashin 64a80f5ac7 aoe: associate frames with the AoE storage target
In the driver code, "target" and aoetgt refer to a particular remote
interface on the AoE storage target.  The latter is identified by its AoE
major and minor addresses.  Commands that are being sent to an AoE storage
target {major, minor} can be sent or retransmitted to any of the remote
MAC addresses associated with the AoE storage target.

That is, frames are naturally associated with not an aoetgt (AoE major,
AoE minor, remote MAC address) but an aoedev (AoE major, AoE minor).
Making the code reflect that reality simplifies the driver, especially
when the path to a remote MAC address becomes unusable.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:27 +09:00
Ed Cashin 6583303c5e aoe: disallow unsupported AoE minor addresses
A guard is inserted to prevent AoE minor addresses (slot addresses) higher
than 15 to be used, as they are not yet supported by the driver.

There is a change coming that will allow the aoe driver to overcome this
limit by using system device minor numbers dynamically, but until then,
this guard prevents unexpected targets from being used by the driver when
AoE targets with high minor numbers are on the AoE network.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:26 +09:00
Ed Cashin 25f4d75ea4 aoe: do revalidation steps in order
The discovery process begins with an optional AoE config query command and
an AoE config query response.  Normally when an aoe device is already
open, the config query response does not trigger an ATA identify device
command to be sent out, since the response contains storage capacity
information that, if changed, could surprise the user of the device.

The userland "aoe-revalidate" tool uses a character device to trigger an
AoE config query for a particular AoE storage target and an ATA device
identify command, even when the device is open.

This change causes the config query to go out first, reflecting the normal
discovery sequence.  The responses could come back in any order, so this
change is fairly cosmetic.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:26 +09:00
Ed Cashin d54d35ac66 aoe: failover remote interface based on aoe_deadsecs parameter
The aoe_deadsecs module parameter allows the user to specify a hard limit
on the number of seconds an AoE command can be retransmitted before the
AoE block device is considered to have failed.

Using aoe_deadsecs to determine the time we try using a different remote
interface helps to ensure that the hard limit is not reached before we've
tried to recover by sending to a different remote port.

As a data storage target, the AoE target is unambiguously identified by
its {major, minor} AoE address tuple, and an AoE target can have multiple
MAC addresses.  However, note that "target" in the driver code and
comments means a {major, minor, MAC address} tuple, as in "somewhere to
send packets".

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:26 +09:00
Ed Cashin 3f0f013374 aoe: use packets that work with the smallest-MTU local interface
Users with several network interfaces dedicated to AoE generally do not
configure them to support different-sized AoE data payloads on purpose.

For a given AoE target, there will be a set of local network interfaces
that can reach it.  Using only the payload that will fit in the
smallest-sized MTU of all those local interfaces greatly simplifies the
driver, especially in failure scenarios.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:25 +09:00
Ed Cashin eb086ec596 aoe: use a kernel thread for transmissions
The dev_queue_xmit function needs to have interrupts enabled, so the most
simple way to get the locking right but still fulfill that requirement is
to use a process that can call dev_queue_xmit serially over queued
transmissions.

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:25 +09:00
Ed Cashin 69cf2d85de aoe: become I/O request queue handler for increased user control
To allow users to choose an elevator algorithm for their particular
workloads, change from a make_request-style driver to an
I/O-request-queue-handler-style driver.

We have to do a couple of things that might be surprising.  We manipulate
the page _count directly on the assumption that we still have no guarantee
that users of the block layer are prohibited from submitting bios
containing pages with zero reference counts.[1] If such a prohibition now
exists, I can get rid of the _count manipulation.

Just as before this patch, we still keep track of the sk_buffs that the
network layer still hasn't finished yet and cap the resources we use with
a "pool" of skbs.[2]

Now that the block layer maintains the disk stats, the aoe driver's
diskstats function can go away.

1. https://lkml.org/lkml/2007/3/1/374
2. https://lkml.org/lkml/2007/7/6/241

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:25 +09:00
Ed Cashin 896831f590 aoe: kernel thread handles I/O completions for simple locking
Make the frames the aoe driver uses to track the relationship between bios
and packets more flexible and detached, so that they can be passed to an
"aoe_ktio" thread for completion of I/O.

The frames are handled much like skbs, with a capped amount of
preallocation so that real-world use cases are likely to run smoothly and
degenerate gracefully even under memory pressure.

Decoupling I/O completion from the receive path and serializing it in a
process makes it easier to think about the correctness of the locking in
the driver, especially in the case of a remote MAC address becoming
unusable.

[dan.carpenter@oracle.com: cleanup an allocation a bit]
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:24 +09:00
Ed Cashin 3d5b06051c aoe: for performance support larger packet payloads
tAdd adds the ability to work with large packets composed of a number of
segments, using the scatter gather feature of the block layer (biovecs)
and the network layer (skb frag array).  The motivation is the performance
gained by using a packet data payload greater than a page size and by
using the network card's scatter gather feature.

Users of the out-of-tree aoe driver already had these changes, but since
early 2011, they have complained of increased memory utilization and
higher CPU utilization during heavy writes.[1] The commit below appears
related, as it disables scatter gather on non-IP protocols inside the
harmonize_features function, even when the NIC supports sg.

  commit f01a5236bd
  Author: Jesse Gross <jesse@nicira.com>
  Date:   Sun Jan 9 06:23:31 2011 +0000

      net offloading: Generalize netif_get_vlan_features().

With that regression in place, transmits always linearize sg AoE packets,
but in-kernel users did not have this patch.  Before 2.6.38, though, these
changes were working to allow sg to increase performance.

1. http://www.spinics.net/lists/linux-mm/msg15184.html

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:24 +09:00
Paul Clements a336d29870 nbd: handle discard requests
Add discard support to nbd.  If the nbd-server supports discard, it will
send NBD_FLAG_SEND_TRIM to the client.  The client will then set the flag
in the kernel via NBD_SET_FLAGS, which tells the kernel to enable discards
for the device (QUEUE_FLAG_DISCARD).

If discard support is enabled, then when the nbd client system receives a
discard request, this will be passed along to the nbd-server.  When the
discard request is received by the nbd-server, it will perform:

	fallocate(.. FALLOC_FL_PUNCH_HOLE ..)

To punch a hole in the backend storage, which is no longer needed.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:24 +09:00
Paul Clements 2f01250888 nbd: add set flags ioctl
Add a set-flags ioctl, allowing various option flags to be set on an nbd
device.  This allows the nbd-client to set the device flags (to enable
read-only mode, or enable discard support, etc.).

Flags are typically specified by the nbd-server.  During the negotiation
phase of the nbd connection, the server sends its flags to the client.
The client then uses NBD_SET_FLAGS to inform the kernel of the options.

Also included is a one-line fix to debug output for the set-timeout ioctl.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:23 +09:00
Linus Torvalds 437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Linus Torvalds 033d9959ed Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue changes from Tejun Heo:
 "This is workqueue updates for v3.7-rc1.  A lot of activities this
  round including considerable API and behavior cleanups.

   * delayed_work combines a timer and a work item.  The handling of the
     timer part has always been a bit clunky leading to confusing
     cancelation API with weird corner-case behaviors.  delayed_work is
     updated to use new IRQ safe timer and cancelation now works as
     expected.

   * Another deficiency of delayed_work was lack of the counterpart of
     mod_timer() which led to cancel+queue combinations or open-coded
     timer+work usages.  mod_delayed_work[_on]() are added.

     These two delayed_work changes make delayed_work provide interface
     and behave like timer which is executed with process context.

   * A work item could be executed concurrently on multiple CPUs, which
     is rather unintuitive and made flush_work() behavior confusing and
     half-broken under certain circumstances.  This problem doesn't
     exist for non-reentrant workqueues.  While non-reentrancy check
     isn't free, the overhead is incurred only when a work item bounces
     across different CPUs and even in simulated pathological scenario
     the overhead isn't too high.

     All workqueues are made non-reentrant.  This removes the
     distinction between flush_[delayed_]work() and
     flush_[delayed_]_work_sync().  The former is now as strong as the
     latter and the specified work item is guaranteed to have finished
     execution of any previous queueing on return.

   * In addition to the various bug fixes, Lai redid and simplified CPU
     hotplug handling significantly.

   * Joonsoo introduced system_highpri_wq and used it during CPU
     hotplug.

  There are two merge commits - one to pull in IRQ safe timer from
  tip/timers/core and the other to pull in CPU hotplug fixes from
  wq/for-3.6-fixes as Lai's hotplug restructuring depended on them."

Fixed a number of trivial conflicts, but the more interesting conflicts
were silent ones where the deprecated interfaces had been used by new
code in the merge window, and thus didn't cause any real data conflicts.

Tejun pointed out a few of them, I fixed a couple more.

* 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits)
  workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending()
  workqueue: use cwq_set_max_active() helper for workqueue_set_max_active()
  workqueue: introduce cwq_set_max_active() helper for thaw_workqueues()
  workqueue: remove @delayed from cwq_dec_nr_in_flight()
  workqueue: fix possible stall on try_to_grab_pending() of a delayed work item
  workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback()
  workqueue: use __cpuinit instead of __devinit for cpu callbacks
  workqueue: rename manager_mutex to assoc_mutex
  workqueue: WORKER_REBIND is no longer necessary for idle rebinding
  workqueue: WORKER_REBIND is no longer necessary for busy rebinding
  workqueue: reimplement idle worker rebinding
  workqueue: deprecate __cancel_delayed_work()
  workqueue: reimplement cancel_delayed_work() using try_to_grab_pending()
  workqueue: use mod_delayed_work() instead of __cancel + queue
  workqueue: use irqsafe timer for delayed_work
  workqueue: clean up delayed_work initializers and add missing one
  workqueue: make deferrable delayed_work initializer names consistent
  workqueue: cosmetic whitespace updates for macro definitions
  workqueue: deprecate system_nrt[_freezable]_wq
  workqueue: deprecate flush[_delayed]_work_sync()
  ...
2012-10-02 09:54:49 -07:00
Sage Weil 6cae3717cd rbd: BUG on invalid layout
This shouldn't actually be possible because the layout struct is
constructed from the RBD header and validated then.

[elder@inktank.com: converted BUG() call to equivalent rbd_assert()]

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-10-01 17:20:00 -05:00
Linus Torvalds d9a807461f USB merge for 3.7-rc1
Here is the big USB pull request for 3.7-rc1
 
 There are lots of gadget driver changes (including copying a bunch of
 files into the drivers/staging/ccg/ directory so that the other gadget
 drivers can be fixed up properly without breaking that driver), and we
 remove the old obsolete ub.c driver from the tree.  There are also the
 usual XHCI set of updates, and other various driver changes and updates.
 We also are trying hard to remove the old dbg() macro, but the final
 bits of that removal will be coming in through the networking tree
 before we can delete it for good.
 
 All of these patches have been in the linux-next tree.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3+AACgkQMUfUDdst+ym5vwCfe93FyJyXn/RDkGz7iBemvWFd
 vrwAoIxjaOa4/yWZWcgrWc5bP4aO3ssc
 =jYDr
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...
2012-10-01 13:23:01 -07:00