Commit Graph

13537 Commits

Author SHA1 Message Date
Jarek Poplawski d66ee0587c net: sk_free() should be allowed right after sk_alloc()
After commit 2b85a34e91
(net: No more expensive sock_hold()/sock_put() on each tx)
sk_free() frees socks conditionally and depends
on sk_wmem_alloc being set e.g. in sock_init_data(). But in some
cases sk_free() is called earlier, usually after other alloc errors.

Fix is to move sk_wmem_alloc initialization from sock_init_data()
to sk_alloc() itself.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:49:00 -07:00
Stephen Hemminger 89d69d2b75 net: make neigh_ops constant
These tables are never modified at runtime. Move to read-only
section.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:40:57 -07:00
Alexey Dobriyan 86393e52c3 netns: embed ip6_dst_ops directly
struct net::ipv6.ip6_dst_ops is separatedly dynamically allocated,
but there is no fundamental reason for it. Embed it directly into
struct netns_ipv6.

For that:
* move struct dst_ops into separate header to fix circular dependencies
	I honestly tried not to, it's pretty impossible to do other way
* drop dynamical allocation, allocate together with netns

For a change, remove struct dst_ops::dst_net, it's deducible
by using container_of() given dst_ops pointer.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:40:31 -07:00
Patrick McHardy 8a56df0ae1 netfilter: ebt_ulog: fix checkentry return value
Commit 19eda87 (netfilter: change return types of check functions for
Ebtables extensions) broke the ebtables ulog module by missing a return
value conversion.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-09-01 14:34:01 +02:00
Damian Lukowski 6fa12c8503 Revert Backoff [v3]: Calculate TCP's connection close threshold as a time value.
RFC 1122 specifies two threshold values R1 and R2 for connection timeouts,
which may represent a number of allowed retransmissions or a timeout value.
Currently linux uses sysctl_tcp_retries{1,2} to specify the thresholds
in number of allowed retransmissions.

For any desired threshold R2 (by means of time) one can specify tcp_retries2
(by means of number of retransmissions) such that TCP will not time out
earlier than R2. This is the case, because the RTO schedule follows a fixed
pattern, namely exponential backoff.

However, the RTO behaviour is not predictable any more if RTO backoffs can be
reverted, as it is the case in the draft
"Make TCP more Robust to Long Connectivity Disruptions"
(http://tools.ietf.org/html/draft-zimmermann-tcp-lcd).

In the worst case TCP would time out a connection after 3.2 seconds, if the
initial RTO equaled MIN_RTO and each backoff has been reverted.

This patch introduces a function retransmits_timed_out(N),
which calculates the timeout of a TCP connection, assuming an initial
RTO of MIN_RTO and N unsuccessful, exponentially backed-off retransmissions.

Whenever timeout decisions are made by comparing the retransmission counter
to some value N, this function can be used, instead.

The meaning of tcp_retries2 will be changed, as many more RTO retransmissions
can occur than the value indicates. However, it yields a timeout which is
similar to the one of an unpatched, exponentially backing off TCP in the same
scenario. As no application could rely on an RTO greater than MIN_RTO, there
should be no risk of a regression.

Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 02:45:47 -07:00
Damian Lukowski f1ecd5d9e7 Revert Backoff [v3]: Revert RTO on ICMP destination unreachable
Here, an ICMP host/network unreachable message, whose payload fits to
TCP's SND.UNA, is taken as an indication that the RTO retransmission has
not been lost due to congestion, but because of a route failure
somewhere along the path.
With true congestion, a router won't trigger such a message and the
patched TCP will operate as standard TCP.

This patch reverts one RTO backoff, if an ICMP host/network unreachable
message, whose payload fits to TCP's SND.UNA, arrives.
Based on the new RTO, the retransmission timer is reset to reflect the
remaining time, or - if the revert clocked out the timer - a retransmission
is sent out immediately.
Backoffs are only reverted, if TCP is in RTO loss recovery, i.e. if
there have been retransmissions and reversible backoffs, already.

Changes from v2:
1) Renaming of skb in tcp_v4_err() moved to another patch.
2) Reintroduced tcp_bound_rto() and __tcp_set_rto().
3) Fixed code comments.

Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 02:45:42 -07:00
Damian Lukowski 4d1a2d9ec1 Revert Backoff [v3]: Rename skb to icmp_skb in tcp_v4_err()
This supplementary patch renames skb to icmp_skb in tcp_v4_err() in order to
disambiguate from another sk_buff variable, which will be introduced
in a separate patch.

Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 02:45:38 -07:00
Yi Zou 579496865c dcbnl: Add implementations of dcbnl setapp/getapp commands
Implements the dcbnl netlink setapp/getapp pair. When a setapp/getapp
is received, dcbnl would just pass on to dcbnl_rtnl_op.setapp/getapp
that are supposed to be implemented by the low level drivers.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:24:36 -07:00
Yi Zou 6fa382af61 dcbnl: Add netlink attributes for setapp/getapp to dcbnl
Add defines for dcbnl netlink attributes to support netlink message passing of
setapp/getapp in dcbnl.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:24:33 -07:00
Yi Zou 0af46d997f vlan: Add support for net_devices_ops.ndo_fcoe_enable/_disable to VLAN
This adds implementation of the net_devices_ops.ndo_fcoe_enable/_disable to
the VLAN driver. It checks if the real_dev has support for ndo_fcoe_enable/
ndo_fcoe_disable and if so, passes on to call the associated real_dev.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:24:23 -07:00
Stephen Hemminger d0cf9c0dad wireless: convert drivers to netdev_tx_t
Mostly just simple conversions:
  * ray_cs had bogus return of NET_TX_LOCKED but driver
    was not using NETIF_F_LLTX
  * hostap and ipw2x00 had some code that returned value
    from a called function that also had to change to return netdev_tx_t

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:14:04 -07:00
Stephen Hemminger 424efe9caf netdev: convert pseudo drivers to netdev_tx_t
These are all drivers that don't touch real hardware.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:40 -07:00
Stephen Hemminger 6518bbb803 irda: convert to netdev_tx_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:38 -07:00
Stephen Hemminger 36e4d64a82 convert hamradio drivers to netdev_txreturnt_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:12 -07:00
Stephen Hemminger 3c805a22a3 convert ATM drivers to netdev_tx_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:10 -07:00
Stephen Hemminger 6fef4c0c8e netdev: convert pseudo-devices to netdev_tx_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:07 -07:00
Julius Volz 94b265514a IPVS: Add handling of incoming ICMPV6 messages
Add handling of incoming ICMPv6 messages.
This follows the handling of IPv4 ICMP messages.

Amongst ther things this problem allows IPVS to behave sensibly
when an ICMPV6_PKT_TOOBIG message is received:

This message is received when a realserver sends a packet >PMTU to the
client. The hop on this path with insufficient MTU will generate an
ICMPv6 Packet Too Big message back to the VIP. The LVS server receives
this message, but the call to the function handling this has been
missing. Thus, IPVS fails to forward the message to the real server,
which then does not adjust the path MTU. This patch adds the missing
call to ip_vs_in_icmp_v6() in ip_vs_in() to handle this situation.

Thanks to Rob Gallagher from HEAnet for reporting this issue and for
testing this patch in production (with direct routing mode).

[horms@verge.net.au: tweaked changelog]
Signed-off-by: Julius Volz <julius.volz@gmail.com>
Tested-by: Rob Gallagher <robert.gallagher@heanet.ie>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-31 16:22:23 +02:00
Patrick McHardy 4889086969 netfilter: ip6t_eui: fix read outside array bounds
Use memcmp() instead of open coded comparison that reads one byte past
the intended end.

Based on patch from Roel Kluin <roel.kluin@gmail.com>

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-31 15:30:31 +02:00
Alexey Dobriyan ee254fa44d netfilter: nf_conntrack: netns fix re reliable conntrack event delivery
Conntracks in netns other than init_net dying list were never killed.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-31 14:23:15 +02:00
Simon Horman 1e66dafc75 ipvs: Use atomic operations atomicly
A pointed out by Shin Hong, IPVS doesn't always use atomic operations
in an atomic manner. While this seems unlikely to be manifest in
strange behaviour, it seems appropriate to clean this up.

Cc: shin hong <hongshin@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-31 14:18:48 +02:00
Krishna Kumar a453e0689a pkt_sched: Fix resource limiting in pfifo_fast
pfifo_fast_enqueue has this check:
        if (skb_queue_len(list) < qdisc_dev(qdisc)->tx_queue_len) {

which allows each band to enqueue upto tx_queue_len skbs for a
total of 3*tx_queue_len skbs. I am not sure if this was the
intention of limiting in qdisc.

Patch compiled and 32 simultaneous netperf testing ran fine. Also:
# tc -s qdisc show dev eth2
qdisc pfifo_fast 0: root bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
 Sent 16835026752 bytes 373116 pkt (dropped 0, overlimits 0 requeues 25) 
 rate 0bit 0pps backlog 0b 0p requeues 25 

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-30 22:20:28 -07:00
Krishna Kumar 03a9a447d2 net: convert remaining non-symbolic return values in dev_queue_xmit
Patch compiled and 32 simultaneous netperf testing ran fine.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-30 22:16:57 -07:00
Oliver Hartkopp 6ca8b990e0 can: use correct NET_RX_ return values
Dropped skb's should be documented by an appropriate return value.
Use the correct NET_RX_DROP and NET_RX_SUCCESS values for that reason.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-30 22:13:18 -07:00
David S. Miller b9caaabb99 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2009-08-30 21:30:39 -07:00
roel kluin b3df9a514f tipc: fix test of bearer_priority range in tipc_register_media()
For the bearer_priority to be less than TIPC_MIN_LINK_PRI and greater than
TIPC_MAX_LINK_PRI is logically impossible.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:19:42 -07:00
Alexey Dobriyan ea00b8e222 can: switch to seq_file
create_proc_read_entry() is going to be removed soon.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:19:38 -07:00
John Dykstra 9a7030b76a tcp: Remove redundant copy of MD5 authentication key
Remove the copy of the MD5 authentication key from tcp_check_req().
This key has already been copied by tcp_v4_syn_recv_sock() or
tcp_v6_syn_recv_sock().

Signed-off-by: John Dykstra <john.dykstra1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:19:25 -07:00
Krishna Kumar fd3ae5e8fc Speed-up pfifo_fast lookup using a private bitmap
Maintain a per-qdisc bitmap for pfifo_fast giving  availability
of skbs for each band. This allows faster lookup for a skb when
there are no high priority skbs. Also, it helps in (rare) cases
when there are no skbs on the list, where an immediate lookup is
faster than iterating through the three bands.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:19:21 -07:00
David Ward 31ce8c71a3 ipv6: Update Neighbor Cache when IPv6 RA is received on a router
When processing a received IPv6 Router Advertisement, the kernel
creates or updates an IPv6 Neighbor Cache entry for the sender --
but presently this does not occur if IPv6 forwarding is enabled
(net.ipv6.conf.*.forwarding = 1), or if IPv6 Router Advertisements
are not accepted (net.ipv6.conf.*.accept_ra = 0), because in these
cases processing of the Router Advertisement has already halted.

This patch allows the Neighbor Cache to be updated in these cases,
while still avoiding any modification to routes or link parameters.

This continues to satisfy RFC 4861, since any entry created in the
Neighbor Cache as the result of a received Router Advertisement is
still placed in the STALE state.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:04:09 -07:00
Octavian Purdila 80a1096bac tcp: fix premature termination of FIN_WAIT2 time-wait sockets
There is a race condition in the time-wait sockets code that can lead
to premature termination of FIN_WAIT2 and, subsequently, to RST
generation when the FIN,ACK from the peer finally arrives:

Time     TCP header
0.000000 30755 > http [SYN] Seq=0 Win=2920 Len=0 MSS=1460 TSV=282912 TSER=0
0.000008 http > 30755 aSYN, ACK] Seq=0 Ack=1 Win=2896 Len=0 MSS=1460 TSV=...
0.136899 HEAD /1b.html?n1Lg=v1 HTTP/1.0 [Packet size limited during capture]
0.136934 HTTP/1.0 200 OK [Packet size limited during capture]
0.136945 http > 30755 [FIN, ACK] Seq=187 Ack=207 Win=2690 Len=0 TSV=270521...
0.136974 30755 > http [ACK] Seq=207 Ack=187 Win=2734 Len=0 TSV=283049 TSER=...
0.177983 30755 > http [ACK] Seq=207 Ack=188 Win=2733 Len=0 TSV=283089 TSER=...
0.238618 30755 > http [FIN, ACK] Seq=207 Ack=188 Win=2733 Len=0 TSV=283151...
0.238625 http > 30755 [RST] Seq=188 Win=0 Len=0

Say twdr->slot = 1 and we are running inet_twdr_hangman and in this
instance inet_twdr_do_twkill_work returns 1. At that point we will
mark slot 1 and schedule inet_twdr_twkill_work. We will also make
twdr->slot = 2.

Next, a connection is closed and tcp_time_wait(TCP_FIN_WAIT2, timeo)
is called which will create a new FIN_WAIT2 time-wait socket and will
place it in the last to be reached slot, i.e. twdr->slot = 1.

At this point say inet_twdr_twkill_work will run which will start
destroying the time-wait sockets in slot 1, including the just added
TCP_FIN_WAIT2 one.

To avoid this issue we increment the slot only if all entries in the
slot have been purged.

This change may delay the slots cleanup by a time-wait death row
period but only if the worker thread didn't had the time to run/purge
the current slot in the next period (6 seconds with default sysctl
settings). However, on such a busy system even without this change we
would probably see delays...

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29 00:00:35 -07:00
Jens Låås 80b71b80df fib_trie: resize rework
Here is rework and cleanup of the resize function.

Some bugs we had. We were using ->parent when we should use 
node_parent(). Also we used ->parent which is not assigned by
inflate in inflate loop.

Also a fix to set thresholds to power 2 to fit halve 
and double strategy.

max_resize is renamed to max_work which better indicates
it's function.

Reaching max_work is not an error, so warning is removed. 
max_work only limits amount of work done per resize.
(limits CPU-usage, outstanding memory etc).

The clean-up makes it relatively easy to add fixed sized 
root-nodes if we would like to decrease the memory pressure
on routers with large routing tables and dynamic routing.
If we'll need that...

Its been tested with 280k routes.

Work done together with Robert Olsson.

Signed-off-by: Jens Låås <jens.laas@its.uu.se>
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:57:15 -07:00
Sascha Hlusiak 8945a808f7 sit: allow ip fragmentation when using nopmtudisc to fix package loss
if tunnel parameters have frag_off set to IP_DF, pmtudisc on the ipv4 link
will be performed by deriving the mtu from the ipv4 link and setting the
DF-Flag of the encapsulating IPv4 Header. If fragmentation is needed on the
way, the IPv4 pmtu gets adjusted, the ipv6 package will be resent eventually,
using the new and lower mtu and everyone is happy.

If the frag_off parameter is unset, the mtu for the tunnel will be derived
from the tunnel device or the ipv6 pmtu, which might be higher than the ipv4
pmtu. In that case we must allow the fragmentation of the IPv4 packet because
the IPv6 mtu wouldn't 'learn' from the adjusted IPv4 pmtu, resulting in
frequent icmp_frag_needed and package loss on the IPv6 layer.

This patch allows fragmentation when tunnel was created with parameter
nopmtudisc, like in ipip/gre tunnels.

Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:53:53 -07:00
Eric Dumazet 30038fc61a net: ip_rt_send_redirect() optimization
While doing some forwarding benchmarks, I noticed
ip_rt_send_redirect() is rather expensive, even if send_redirects is
false for the device.

Fix is to avoid two atomic ops, we dont really need to take a
reference on in_dev

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:52:01 -07:00
Eric Dumazet df19a62677 tcp: keepalive cleanups
Introduce keepalive_probes(tp) helper, and use it, like 
keepalive_time_when(tp) and keepalive_intvl_when(tp)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:48:54 -07:00
Eric Dumazet 3d1427f870 ipv4: af_inet.c cleanups
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:45:21 -07:00
Alexey Dobriyan 2975315b79 pktgen: use proc_create_data()
It looks like after rename device proc entry is unusable,
because of no ->read_proc or ->proc_fops.

And create_proc_entry() is deprecated.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:43 -07:00
Stephen Hemminger c3d2f52dd4 pktgen: increase version
Increase module version, and cleanup module info.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:39 -07:00
Stephen Hemminger 63adc6fb8a pktgen: cleanup checkpatch warnings
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:37 -07:00
Stephen Hemminger 64e8ff5ef2 pktgen: use common idle routine
Simpler to have one place that spins and accounts for delays,
this will also make the last packet be detected faster for more
repeatable timing.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:36 -07:00
Stephen Hemminger 2bc481cf43 pktgen: spin using hrtimer
This changes how the pktgen thread spins/waits between
packets if delay is configured. It uses a high res timer to
wait for time to arrive.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:29 -07:00
Stephen Hemminger fd29cf7262 pktgen: convert to use ktime_t
The kernel ktime_t is a nice generic infrastructure for mananging
high resolution times, as is done in pktgen.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:12 -07:00
Stephen Hemminger 5c9d191c16 pktgen: avoid calling gettimeofday
If not using delay then no need to update next_tx after
each packet sent. This allows pktgen to send faster especially
on systems with slower clock sources.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:09 -07:00
Stephen Hemminger 5b8db2f568 pktgen: reorganize transmit loop
Handle standard (and non-standard) return values in a switch.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:07 -07:00
Stephen Hemminger e470757d61 pktgen: use netdev_alloc_skb
netdev_alloc_skb is NUMA node aware.
Also, don't exhaust atomic emergency pool. Don't want pktgen
to cause OOM behaviour.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:04 -07:00
Stephen Hemminger 7d7bb1cf0e pktgen: cleanup clone count test
The if statement to test for "should a new packet be used"
can be simplified.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:00 -07:00
Stephen Hemminger 3791decb5a pktgen: xmit logic reorganization
Do some reorganization of transmit logic path:
   * move transmit queue full idle to separate routine
   * add a cpu_relax()
   * eliminate some of the uneeded goto's
   * if queue is still stopped, go back to main thread loop.
   * don't give up transmitting if quantum is exhausted (be greedy)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:55 -07:00
Stephen Hemminger 3bda06a3d7 pktgen: stop_device cleanup
All the callers were freeing skb after stopping device.
Remove unneeded forward decl.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:53 -07:00
Stephen Hemminger 65c5b786a3 pktgen: mark read-only/mostly variables
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:51 -07:00
Stephen Hemminger 475ac1e409 pktgen: change inlining
Don't force inlining where not needed. Gcc does better job
of deciding to inline local functions.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:47 -07:00
Stephen Hemminger 648fda7404 pktgen: minor cleanup
A couple of minor functions can be written more compactly.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:45 -07:00
Trond Myklebust 2574cc9f4f SUNRPC: Fix rpc_task_force_reencode
This patch fixes the bug that was reported in
  http://bugzilla.kernel.org/show_bug.cgi?id=14053

If we're in the case where we need to force a reencode and then resend of
the RPC request, due to xprt_transmit failing with a networking error, then
we _must_ retransmit the entire request.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-28 19:35:56 -10:00
Jouni Malinen 5bf6fcc2bb mac80211: Check pending scan request after having processed mgd work
When the queued management work items are processed in
ieee80211_sta_work() an item could be removed. This could change the
anybusy from true to false, so we better check whether we can start a
new scan only after having processed the pending work first.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:46 -04:00
Johannes Berg 15db0b7fd8 mac80211: fix scan cancel on ifdown
When an interface is taken down while a scan is
pending -- i.e. a scan request was accepted but
not yet acted upon due to other work being in
progress -- we currently do not properly cancel
that scan and end up getting stuck. Fix this by
doing better checks when an interface is taken
down.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:45 -04:00
Arnd Hannemann eadac6bf95 mac80211: Fix output of minstrels rc_stats
An integer overflow in the minstrel debug code prevented the
throughput to be displayed correctly. This patch fixes that,
by permutating operations like proposed by Pavel Roskin.

Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:43 -04:00
Johannes Berg 77a980dc6c mac80211: fix RX skb leaks
In mac80211's RX path some of the warnings that
warn about drivers passing invalid status values
leak the skb, fix that by refactoring the code.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:41 -04:00
Roel Kluin 0448b5fc03 nl80211: jump to out_err upon unsupported iftype
Jump to out_err when the iftype is not supported.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:41 -04:00
Arnd Hannemann 1c4e9ab3f1 mac80211: Remove unnused throughput field from minstrel_rate.
I noticed that the throughput field of the minstrel_rate struct is never used,
so remove it.

Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:34 -04:00
Johannes Berg ea77f12f2c mac80211: remove tasklet enable/disable
Due to the way the tasklets work in mac80211 there's
no need to ever disable them.

However, we need to clear the pending packets when
taking down the last interface because otherwise
the tx_pending_tasklet might be queued if the
driver mucks with the queues (which it shouldn't).

I've had a situation occasionally with ar9170 in
which ksoftirq was using 100% CPU time because
a disabled tasklet was scheduled, and I think that
was due to ar9170 receiving a packet while the
tasklet was disabled. That's strange and it really
should not do that for other reasons, but there's
no need to waste that much CPU time over it, it
should just warn instead.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:34 -04:00
Johannes Berg 3d54d25515 cfg80211: clean up properly on interface type change
When the interface type changes while connected, and the
driver does not require the interface to be down for a
type change, it is currently possible to get very strange
results unless the driver takes special care, which it
shouldn't have to.

To fix this, take care to disconnect/leave IBSS when
changing the interface type -- even if the driver may fail
the call. Also process all events that may be pending to
avoid running into a situation where an event is reported
but only processed after the type has already changed,
which would lead to missing events and warnings.

A side effect of this is that you will have disconnected
or left the IBSS even if the mode change ultimately fails,
but since the intention was to change it and thus leave or
disconnect, this is not a problem.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:31 -04:00
Johannes Berg f7969969f4 cfg80211: make spurious warnings less likely, configurable
Bob reported that he got warnings in IBSS mode about
the ssid_len being zero on a joined event, but only
when kmemcheck was enabled. This appears to be due
to a race condition between drivers and userspace,
when the driver reports joined but the user in the
meantime decided to leave the IBSS again, the warning
would trigger. This was made more likely by kmemcheck
delaying the code that does the check and sends the
event.

So first, make the warning trigger closer to the
driver, which means it's not locked, but since only
the warning depends on it that's ok.

And secondly, users will not want to have spurious
warnings at all, so make those that are known to be
racy in such a way configurable.

Reported-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:30 -04:00
John W. Linville 103bf9f7d3 mac80211: remove ieee80211_rx namespace hack
With the libipw naming scheme change, it is no longer necessary for
mac80211 to avoid the ieee80211_rx name clash.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:29 -04:00
Johannes Berg 01a0ac417c cfg80211: check lost scans later, fix bug
When we lose a scan, cfg80211 tries to clean up after
the driver. However, it currently does this too early,
it does this in GOING_DOWN already instead of DOWN, so
it may happen with mac80211. Besides fixing this, also
make it more robust by leaking the scan request so if
the driver later actually finishes the scan, it won't
crash. Also check in ___cfg80211_scan_done whether a
scan request is still pending and exit if not.

Reported-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:25 -04:00
Johannes Berg 84f6a01ce0 mac80211: fix configure_filter invocation after stop
Since configure_filter can sleep now, any multicast
configuration needed to be postponed to a work struct.
This, however, lead to a problem that we could queue
the work, stop the device and then afterwards invoke
configure_filter which may lead to driver hangs and is
a bug. To fix this, we can just cancel the filter work
since it's unnecessary to do after stopping the hw.

Since there are various places that call drv_stop, and
two of them do very similar things, the code for them
can be put into a shared function at the same time.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Tested-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:25 -04:00
Javier Cardona 9e03fdfd05 mac80211: Update mesh config IE to 11s draft 3.02
The mesh config information element has changed significantly since draft 1.08
This patch brings it up to date.

Thanks to Sam Leffler and Rui Paulo for identifying this.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28 14:40:24 -04:00
Wei Yongjun b0401d7253 sunrpc: move the close processing after do recvfrom method
sunrpc: "Move close processing to a single place"
(d7979ae4a0) moved the
close processing before the recvfrom method. This may
cause the close processing never to execute. So this
patch moves it to the right place.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-27 17:18:38 -04:00
Linus Torvalds cf481442f2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: update documentation pointers
  9p: remove unnecessary v9fses->options which duplicates the mount string
  net/9p: insulate the client against an invalid error code sent by a 9p server
  9p: Add missing cast for the error return value in v9fs_get_inode
  9p: Remove redundant inode uid/gid assignment
  9p: Fix possible regressions when ->get_sb fails.
  9p: Fix v9fs show_options
  9p: Fix possible memleak in v9fs_inode_from fid.
  9p: minor comment fixes
  9p: Fix possible inode leak in v9fs_get_inode.
  9p: Check for error in return value of v9fs_fid_add
2009-08-27 12:24:08 -07:00
Julien TINNES 788d908f28 ipv4: make ip_append_data() handle NULL routing table
Add a check in ip_append_data() for NULL *rtp to prevent future bugs in
callers from being exploitable.

Signed-off-by: Julien Tinnes <julien@cr0.org>
Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-27 12:23:43 -07:00
Gustavo F. Padovan 7e7430908c Bluetooth: Add support for L2CAP 'Send RRorRNR' action
When called, 'Send RRorRNR' should send a RNR frame if local device is
busy or a RR frame otherwise.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26 00:12:20 -07:00
Gustavo F. Padovan 2246b2f1b4 Bluetooth: Handle L2CAP case when the remote receiver is busy
Implement all issues related to RemoteBusy in the RECV state table.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26 00:12:20 -07:00
Gustavo F. Padovan ca42a613c9 Bluetooth: Acknowledge L2CAP packets when receiving RR-frames (F-bit=1)
Implement the Recv ReqSeqAndFBit event when a RR frame with F bit set is
received.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-26 00:12:20 -07:00
Linus Torvalds f415c413f4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  irda/sa1100_ir: fix broken netdev_ops conversion
  irda/au1k_ir: fix broken netdev_ops conversion
  pkt_sched: Fix bogon in tasklet_hrtimer changes.
2009-08-25 21:24:49 -07:00
Wei Yongjun eac81736e6 sunrpc: reply AUTH_BADCRED to RPCSEC_GSS with unknown service
When an RPC message is received with RPCSEC_GSS with an unknown service
(not RPC_GSS_SVC_NONE, RPC_GSS_SVC_INTEGRITY, or RPC_GSS_SVC_PRIVACY),
svcauth_gss_accept() returns AUTH_BADCRED, but svcauth_gss_release()
subsequently drops the response entirely, discarding the error.

Fix that so the AUTH_BADCRED error is returned to the client.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-25 17:39:43 -04:00
Ryusei Yamaguchi ed2d8aed52 knfsd: Replace lock_kernel with a mutex in nfsd pool stats.
lock_kernel() in knfsd was replaced with a mutex. The later
commit 03cf6c9f49 ("knfsd:
add file to export stats about nfsd pools") did not follow
that change. This patch fixes the issue.

Also move the get and put of nfsd_serv to the open and close methods
(instead of start and stop methods) to allow atomic check and increment
of reference count in the open method (where we can still return an
error).

Signed-off-by: Ryusei Yamaguchi <mandel59@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Greg Banks <gnb@fmeh.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-25 12:39:37 -04:00
Patrick McHardy 3993832464 netfilter: nfnetlink: constify message attributes and headers
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-25 16:07:58 +02:00
Patrick McHardy 3a6c2b419b netlink: constify nlmsghdr arguments
Consitfy nlmsghdr arguments to a couple of functions as preparation
for the next patch, which will constify the netlink message data in
all nfnetlink users.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-25 16:07:40 +02:00
Patrick McHardy 74f7a6552c netfilter: nf_conntrack: log packets dropped by helpers
Log packets dropped by helpers using the netfilter logging API. This
is useful in combination with nfnetlink_log to analyze those packets
in userspace for debugging.

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-25 15:33:08 +02:00
David S. Miller a2cb6a4dd4 pkt_sched: Fix bogon in tasklet_hrtimer changes.
Reported by Stephen Rothwell, luckily it's harmless:

net/sched/sch_api.c: In function 'qdisc_watchdog':
net/sched/sch_api.c:460: warning: initialization from incompatible pointer type
net/sched/sch_cbq.c: In function 'cbq_undelay':
net/sched/sch_cbq.c:595: warning: initialization from incompatible pointer type

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-24 19:37:05 -07:00
Randy Dunlap cbe86b98a6 Bluetooth: Add missing selection of CONFIG_CRC16 for L2CAP layer
Fix net/bluetooth/l2cap.c build errors:

l2cap.c:(.text+0x126035): undefined reference to `crc16'
l2cap.c:(.text+0x126323): undefined reference to `crc16'
l2cap.c:(.text+0x12668e): undefined reference to `crc16'
l2cap.c:(.text+0x12683b): undefined reference to `crc16'
l2cap.c:(.text+0x126956): undefined reference to `crc16'
net/built-in.o:l2cap.c:(.text+0x129041): more undefined references to `crc16' follow

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24 16:34:35 -07:00
Alexandros Batsakis 8f55f3c0a0 nfsd41: sunrpc: svc_tcp_recv_record()
Factor functionality out of svc_tcp_recvfrom() to simplify routine

Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-08-24 18:13:10 -04:00
Linus Torvalds 1cac6ec9b7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  smc91x: let smc91x work well under netpoll
  pxaficp-ir: remove incorrect net_device_ops
  NET: llc, zero sockaddr_llc struct
  drivers/net: fixed drivers that support netpoll use ndo_start_xmit()
  netpoll: warning for ndo_start_xmit returns with interrupts enabled
  net: Fix Micrel KSZ8842 Kconfig description
  netfilter: xt_quota: fix wrong return value (error case)
  ipv6: Fix commit 63d9950b08 (ipv6: Make v4-mapped bindings consistent with IPv4)
  E100: fix interaction with swiotlb on X86.
  pkt_sched: Convert CBQ to tasklet_hrtimer.
  pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer
  rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B
  ibm_newemac: emac_close() needs to call netif_carrier_off()
  net: fix ks8851 build errors
  net: Rename MAC platform driver for w90p910 platform
  yellowfin: Fix buffer underrun after dev_alloc_skb() failure
  orinoco: correct key bounds check in orinoco_hw_get_tkip_iv
  mac80211: fix todo lock
2009-08-24 12:25:03 -07:00
Eric Dumazet f3abc9b963 netfilter: bridge: refcount fix
commit f216f082b2
([NETFILTER]: bridge netfilter: deal with martians correctly)
added a refcount leak on in_dev.

Instead of using in_dev_get(), we can use __in_dev_get_rcu(),
as netfilter hooks are running under rcu_read_lock(), as pointed
by Patrick.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-24 19:35:38 +02:00
Maximilian Engelhardt cce5a5c302 netfilter: nf_nat: fix inverted logic for persistent NAT mappings
Kernel 2.6.30 introduced a patch [1] for the persistent option in the
netfilter SNAT target. This is exactly what we need here so I had a quick look
at the code and noticed that the patch is wrong. The logic is simply inverted.
The patch below fixes this.

Also note that because of this the default behavior of the SNAT target has
changed since kernel 2.6.30 as it now ignores the destination IP in choosing
the source IP for nating (which should only be the case if the persistent
option is set).

[1] http://git.eu.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=98d500d66cb7940747b424b245fc6a51ecfbf005

Signed-off-by: Maximilian Engelhardt <maxi@daemonizer.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-24 19:24:54 +02:00
Jan Engelhardt 35aad0ffdf netfilter: xtables: mark initial tables constant
The inputted table is never modified, so should be considered const.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-24 14:56:30 +02:00
Gustavo F. Padovan 1b7bf4edca Bluetooth: Use proper *_unaligned_le{16,32} helpers for L2CAP
Simplify more conversions to the right endian with the proper helpers.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24 01:05:05 -07:00
Gustavo F. Padovan e686219a64 Bluetooth: Add locking scheme to L2CAP timeout callbacks
Avoid race conditions when accessing the L2CAP socket from within the
timeout handlers.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-24 01:05:05 -07:00
Jiri Slaby 28e9fc592c NET: llc, zero sockaddr_llc struct
sllc_arphrd member of sockaddr_llc might not be changed. Zero sllc
before copying to the above layer's structure.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 22:55:51 -07:00
Dongdong Deng 79b1bee888 netpoll: warning for ndo_start_xmit returns with interrupts enabled
WARN_ONCE for ndo_start_xmit() enable interrupts in netpoll_send_skb(),
because the NETPOLL API requires that interrupts remain disabled in
netpoll_send_skb().

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:50:59 -07:00
David S. Miller 9409172262 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan 2009-08-23 19:19:30 -07:00
Andy Grover f2c449320d RDS: Add a debug message suggesting to load transport modules
Now that RDS transports are no longer compiled-in to RDS core,
there is now the possibility that they will not be loaded. This
adds a helpful suggestion when rds_bind() fails to find a transport.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:14 -07:00
Andy Grover 335776bd69 RDS: Track transports via an array, not a list
Now that transports can be loaded in arbitrary order,
it is important for rds_trans_get_preferred() to look
for them in a particular order, instead of walking the list
until it finds a transport that works for a given address.
Now, each transport registers for a specific transport slot,
and these are ordered so that preferred transports come first,
and then if they are not loaded, other transports are queried.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:12 -07:00
Andy Grover 40d866095d RDS: Modularize RDMA and TCP transports
Enable the building of transports as modules.

Also, improve consistency of Kconfig messages in relation to other
protocols, and move build dependency on IB from the RDS core code
to the rds_rdma module.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:09 -07:00
Andy Grover 616b757ae1 RDS: Export symbols from core RDS
Now that rdma and tcp transports will be modularized,
we need to export a number of functions so they can call them.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:07 -07:00
Andy Grover 70041088e3 RDS: Add TCP transport to RDS
This code allows RDS to be tunneled over a TCP connection.

RDMA operations are disabled when using TCP transport,
but this frees RDS from the IB/RDMA stack dependency, and allows
it to be used with standard Ethernet adapters, or in a VM.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:13:02 -07:00
Patrick McHardy 2149f66f49 netfilter: xt_quota: fix wrong return value (error case)
Success was indicated on a memory allocation failure, thereby causing
a crash due to a later NULL deref.
(Affects v2.6.30-rc1 up to here.)

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:09:23 -07:00
Bruno Prémont ca6982b858 ipv6: Fix commit 63d9950b08 (ipv6: Make v4-mapped bindings consistent with IPv4)
Commit 63d9950b08
  (ipv6: Make v4-mapped bindings consistent with IPv4)
changes behavior of inet6_bind() for v4-mapped addresses so it should
behave the same way as inet_bind().

During this change setting of err to -EADDRNOTAVAIL got lost:

af_inet.c:469 inet_bind()
	err = -EADDRNOTAVAIL;
	if (!sysctl_ip_nonlocal_bind &&
	    !(inet->freebind || inet->transparent) &&
	    addr->sin_addr.s_addr != htonl(INADDR_ANY) &&
	    chk_addr_ret != RTN_LOCAL &&
	    chk_addr_ret != RTN_MULTICAST &&
	    chk_addr_ret != RTN_BROADCAST)
		goto out;


af_inet6.c:463 inet6_bind()
	if (addr_type == IPV6_ADDR_MAPPED) {
		int chk_addr_ret;

		/* Binding to v4-mapped address on a v6-only socket                         
		 * makes no sense                                                           
		 */
		if (np->ipv6only) {
			err = -EINVAL;
			goto out; 
		}

		/* Reproduce AF_INET checks to make the bindings consitant */               
		v4addr = addr->sin6_addr.s6_addr32[3];                                      
		chk_addr_ret = inet_addr_type(net, v4addr);                                 
		if (!sysctl_ip_nonlocal_bind &&                                             
		    !(inet->freebind || inet->transparent) &&                               
		    v4addr != htonl(INADDR_ANY) &&
		    chk_addr_ret != RTN_LOCAL &&                                            
		    chk_addr_ret != RTN_MULTICAST &&                                        
		    chk_addr_ret != RTN_BROADCAST)
			goto out;
	} else {


Signed-off-by Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:06:28 -07:00
David S. Miller 38acce2d79 pkt_sched: Convert CBQ to tasklet_hrtimer.
This code expects to run in softirq context, and bare hrtimers
run in hw IRQ context.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-23 18:52:38 -07:00
David S. Miller ee5f9757ea pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer
None of this stuff should execute in hw IRQ context, therefore
use a tasklet_hrtimer so that it runs in softirq context.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-22 18:09:17 -07:00
Luiz Augusto von Dentz 9e726b1742 Bluetooth: Fix rejected connection not disconnecting ACL link
When using DEFER_SETUP on a RFCOMM socket, a SABM frame triggers
authorization which when rejected send a DM response. This is fine
according to the RFCOMM spec:

    the responding implementation may replace the "proper" response
    on the Multiplexer Control channel with a DM frame, sent on the
    referenced DLCI to indicate that the DLCI is not open, and that
    the responder would not grant a request to open it later either.

But some stacks doesn't seems to cope with this leaving DLCI 0 open after
receiving DM frame.

To fix it properly a timer was introduced to rfcomm_session which is used
to set a timeout when the last active DLC of a session is unlinked, this
will give the remote stack some time to reply with a proper DISC frame on
DLCI 0 avoiding both sides sending DISC to each other on stacks that
follow the specification and taking care of those who don't by taking
down DLCI 0.

Signed-off-by: Luiz Augusto von Dentz <luiz.dentz@openbossa.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 15:05:58 -07:00
Gustavo F. Padovan ef54fd937f Bluetooth: Full support for receiving L2CAP SREJ frames
Support for receiving of SREJ frames as specified by the state table.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 15:03:43 -07:00
Gustavo F. Padovan 8f17154f1f Bluetooth: Add support for L2CAP SREJ exception
When L2CAP loses an I-frame we send a SREJ frame to the transmitter side
requesting the lost packet. This patch implement all Recv I-frame events
on SREJ_SENT state table except the ones that deal with SendRej (the REJ
exception at receiver side is yet not implemented).

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 15:01:25 -07:00
Gustavo F. Padovan fcc203c30d Bluetooth: Add support for FCS option to L2CAP
Implement CRC16 check for L2CAP packets. FCS is used by Streaming Mode and
Enhanced Retransmission Mode and is a extra check for the packet content.

Using CRC16 is the default, L2CAP won't use FCS only when both side send
a "No FCS" request.

Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:59:49 -07:00
Gustavo F. Padovan 6840ed0770 Bluetooth: Enable Streaming Mode for L2CAP
Streaming Mode is helpful for the Bluetooth streaming based profiles, such
as A2DP. It doesn't have any error control or flow control.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:57:58 -07:00
Gustavo F. Padovan e90bac061b Bluetooth: Add support for Retransmission and Monitor Timers
L2CAP uses retransmission and monitor timers to inquiry the other side
about unacked I-frames. After sending each I-frame we (re)start the
retransmission timer. If it expires, we start a monitor timer that send a
S-frame with P bit set and wait for S-frame with F bit set. If monitor
timer expires, try again, at a maximum of L2CAP_DEFAULT_MAX_TX.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:56:15 -07:00
Gustavo F. Padovan 30afb5b2aa Bluetooth: Initial support for retransmission of packets with REJ frames
When receiving an I-frame with unexpected txSeq, receiver side start the
recovery procedure by sending a REJ S-frame to the transmitter side. So
the transmitter can re-send the lost I-frame.

This patch just adds a basic support for retransmission, it doesn't
mean that ERTM now has full support for packet retransmission.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:55:20 -07:00
Gustavo F. Padovan c74e560cd0 Bluetooth: Add support for Segmentation and Reassembly of SDUs
ERTM should use Segmentation and Reassembly to break down a SDU in many
PDUs on sending data to the other side.

On sending packets we queue all 'segments' until end of segmentation and
just the add them to the queue for sending. On receiving we create a new
SKB with the SDU reassembled.

Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:53:58 -07:00
Gustavo F. Padovan 1c2acffb76 Bluetooth: Add initial support for ERTM packets transfers
This patch adds support for ERTM transfers, without retransmission, with
txWindow up to 63 and with acknowledgement of packets received. Now the
packets are queued before call l2cap_do_send(), so packets couldn't be
sent at the time we call l2cap_sock_sendmsg(). They will be sent in
an asynchronous way on later calls of l2cap_ertm_send(). Besides if an
error occurs on calling l2cap_do_send() we disconnect the channel.

Initially based on a patch from Nathan Holstein <nathan@lampreynetworks.com>

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:53:01 -07:00
Gustavo F. Padovan 22121fc915 Bluetooth: Create separate l2cap_send_disconn_req() function
The code for sending a disconnect request was repeated several times
within L2CAP source code. So move this into its own function.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Gustavo F. Padovan f2fcfcd670 Bluetooth: Add configuration support for ERTM and Streaming mode
Add support to config_req and config_rsp to configure ERTM and Streaming
mode. If the remote device specifies ERTM or Streaming mode, then the
same mode is proposed. Otherwise ERTM or Basic mode is used. And in case
of a state 2 device, the remote device should propose the same mode. If
not, then the channel gets disconnected.

Signed-off-by: Gustavo F. Padovan <gustavo@las.ic.unicamp.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann 65c7c49184 Bluetooth: Add L2CAP RFC option if ERTM is enabled
When trying to establish a connection with Enhanced Retransmission mode
enabled, the RFC option needs to be added to the configuration.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann c6b03cf986 Bluetooth: Allow setting of L2CAP ERTM via socket option
To enable Enhanced Retransmission mode it needs to be set via a socket
option. A different mode can be set on a socket, but on listen() and
connect() the mode is checked and ERTM is only allowed if it is enabled
via the module parameter.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann 44dd46de32 Bluetooth: Add module option to enable L2CAP ERTM support
Since the Enhanced Retransmission mode for L2CAP is still under heavy
development disable it by default and provide a module option to enable
it manually for testing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:50:07 -07:00
Marcel Holtmann 52d18347df Bluetooth: Coding style cleanup from previous rfcomm_init bug fix
The rfcomm_init bug fix went into the kernel premature before it got fully
reviewed and acknowledged by the Bluetooth maintainer. So fix up the coding
style now.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:49:36 -07:00
Thomas Gleixner a6a67efd70 Bluetooth: Convert hdev->req_lock to a mutex
hdev->req_lock is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:35:02 -07:00
Marcel Holtmann edad638869 Bluetooth: Let HIDP grab the device reference for connections
The core exports the hci_conn_hold_device() and hci_conn_put_device()
functions for device reference of connections. Use this to ensure that
the uevents from the parent are send after the child ones.

Based on a report by Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:22:15 -07:00
Marcel Holtmann 9eba32b86d Bluetooth: Add extra device reference counting for connections
The device model itself has no real usable reference counting at the
moment and this causes problems if parents are deleted before their
children. The device model itself handles the memory details of this
correctly, but the uevent order is not consistent. This causes various
problems for systems like HAL or even X.

So until device_put() does a proper cleanup, the device for Bluetooth
connection will be protected with an extra reference counting to ensure
the correct order of uevents when connections are terminated.

This is not an automatic feature. Higher Bluetooth layers like HIDP or
BNEP should grab this new reference to ensure that their uevents are
send before the ones from the parent device.

Based on a report by Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:19:26 -07:00
Marcel Holtmann 364f63519d Bluetooth: Disconnect HIDRAW devices on disconnect
Currently the HID subsystem will create HIDRAW devices for the transport
driver, but it will not disconnect them. Until the HID subsytem gets
fixed, ensure that HIDRAW and HIDDEV devices are disconnected when the
Bluetooth HID device gets removed.

Based on a patch from Brian Rogers <brian@xyzw.org>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:15:53 -07:00
Vikram Kandukuri 981b1414d7 Bluetooth: Fix missing scheduling when VIRTUAL_CABLE_UNPLUG is received
There is a test case in PTS tool; PTS will send the VIRTUAL_CABLE_UNPLUG
command to IUT. Then IUT should disconnect the channel and kill the HID
session when it receives the command. The VIRTUAL_CABLE_UNPLUG command
is parsed by HID transport, but it is not scheduled to do so. Add a
call to hidp_schedule() to kill the session.

Signed-off-by: Jothikumar Mothilal <jothikumar.mothilal@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-08-22 14:12:17 -07:00
Marcel Holtmann fd0b3ff707 Bluetooth: Add proper shutdown support to SCO sockets
The SCO sockets for Bluetooth audio setup and streaming are missing the
shutdown implementation. This hasn't been a problem so far, but with a
more deeper integration with PulseAudio it is important to shutdown SCO
sockets properly.

Also the Headset profile 1.2 has more detailed qualification tests that
require that SCO and RFCOMM channels are terminated in the right order. A
proper shutdown function is necessary for this.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>
2009-08-22 14:11:46 -07:00
J. Bruce Fields e9dc122166 Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming
Conflicts:
	net/sunrpc/cache.c
2009-08-21 11:27:29 -04:00
Trond Myklebust 405d8f8b1d SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
We can oops if rpc_pipefs isn't properly initialised before we start to set
up objects that depend upon it.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-21 08:17:56 -04:00
David S. Miller f8f2109d4f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-08-21 01:56:56 -07:00
Johannes Berg 11ba964d4f mac80211: fix register_hw error path
"cfg80211: fix alignment problem in scan request"
introduced a bug into the error path, because now
we allocate the entire scan request and not just
the channel list (the channel list is allocated
together with the scan request) -- on errors we
thus also need to free the entire scan request.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:07 -04:00
Zhu Yi 16a832e785 cfg80211: allow cfg80211_connect_result with bssid == NULL
In case of connection failure, the bssid info is not a must have.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:07 -04:00
David Kilroy 415ad1efae cfg80211: fix leaks of wdev->conn->ie
This only occurs in the following error situations:
 - driver calls connect_result with failure
 - error scheduling authentication on connect
 - error initiating scan (to get BSSID and channel) on
   connect
 - userspace calls disconnect while in the SCANNING or
   SCAN_AGAIN states

Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:06 -04:00
Johannes Berg ad002395fd cfg80211: fix dangling scan request checking
My patch "cfg80211: fix deadlock" broke the code it
was supposed to fix, the scan request checking. But
it's not trivial to put it back the way it was, since
the original patch had a deadlock.

Now do it in a completely new way: queue the check
off to a work struct, where we can freely lock. But
that has some more complications, like needing to
wait for it to be done before the wiphy/rdev can be
destroyed, so some code is required to handle that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:05 -04:00
Daniel Walker c8a61a7d33 mac80211: New stat counters for multicast and unicast forwarded frames
This expands on the current fwded_frames stat counter which should be equal to
the total of these two new counters.  The new counters are called "fwded_mcast"
and "fwded_unicast".

Signed-off-by: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:04 -04:00
John W. Linville 29508d122a rc80211_pid_algo.c: remove unused variable declaration
CC [M]  net/mac80211/rc80211_pid_algo.o
net/mac80211/rc80211_pid_algo.c: In function ‘rate_control_pid_rate_init’:
net/mac80211/rc80211_pid_algo.c:304: warning: unused variable ‘si’

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:03 -04:00
Javier Cardona bfc32e6a95 mac80211: Decouple fail_avg stats used by mesh from rate control algorithm.
Mesh uses the tx failure average to compute the (m)path metric.  This used to
be done inside the rate control module.  This patch breaks the dependency
between the mesh stack and the rate control algorithm.  Mesh will now work
independently of the chosen rate control algorithm.

The mesh stack keeps a moving average of the average transmission losses for
each mesh peer station.  If the fail average exceeds a certain threshold, the
peer link is marked as broken.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:36:02 -04:00
Johannes Berg f424afa178 mac80211: remove deprecated API
All but two drivers have now stopped using the two
deprecated members radio_enabled and beacon_int,
so it's about time to remove them for good.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:58 -04:00
Johannes Berg 3ac64beecd mac80211: allow configure_filter callback to sleep
Over time, a whole bunch of drivers have come up
with their own scheme to delay the configure_filter
operation to a workqueue. To be able to simplify
things, allow configure_filter to sleep, and add
a new prepare_multicast callback that drivers that
need the multicast address list implement. This new
callback must be atomic, but most drivers either
don't care or just calculate a hash which can be
done atomically and then uploaded to the hardware
non-atomically.

A cursory look suggests that at76c50x-usb, ar9170,
mwl8k (which is actually very broken now), rt2x00,
wl1251, wl1271 and zd1211 should make use of this
new capability.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:58 -04:00
Johannes Berg ea416a793d cfg80211: report userspace SME connected event properly
Instead of hacking the event reporting into the
__cfg80211_connect_result() function which is also
invoked by others, set up things correctly and then
invoke that function, so that it can do more sanity
checking.

Also, it is currently not possible to get a ROAMED
event from the userspace SME anyway since we send
out a DISCONNECTED event when it disassociates and
then a new CONNECTED event on the next association.

Thanks to Zhu Yi for pointing out that the code is
somewhat convoluted and doesn't warn when it should.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:57 -04:00
Johannes Berg 0ff6ce7b36 cfg80211: fix deadlock
When removing an interface with nl80211, cfg80211 will
deadlock in the netdev notifier because we're already
holding rdev->mtx and try to acquire it again to verify
the scan has been done.

This bug was introduced by my patch
"cfg80211: check for and abort dangling scan requests".

To fix this, move the dangling scan request check into
wiphy_unregister(). This will not be able to catch all
cases right away, but if the scan problem happens with
a manual ifdown or so it will be possible to remedy it
by removing the module/device.

Additionally, add comments about the deadlock scenario.

Reported-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Christian Lamparter <chunkeey@web.de>
Tested-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:35:56 -04:00
Jussi Kivilinna a8b875e7dc cfg80211: export cfg80211_wext_siwfreq
cfg80211_wext_siwfreq() should be exported with EXPORT_SYMBOL_GPL.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20 11:33:09 -04:00
James Morris ece13879e7 Merge branch 'master' into next
Conflicts:
	security/Kconfig

Manual fix.

Signed-off-by: James Morris <jmorris@namei.org>
2009-08-20 09:18:42 +10:00
Trond Myklebust f7e86ab92f SUNRPC: cache must take a reference to the cache detail's module on open()
Otherwise we Oops if the module containing the cache detail is removed
before all cache readers have closed the file.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-19 18:22:16 -04:00
Trond Myklebust e571cbf1a4 NFS: Add a dns resolver for use with NFSv4 referrals and migration
The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client
from one server to another in order to support filesystem migration and
replication. For full protocol support, we need to add the ability to
convert a DNS host name into an IP address that we can feed to the RPC
client.

We'll reuse the sunrpc cache, now that it has been converted to work with
rpc_pipefs.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-19 18:22:15 -04:00
Trond Myklebust 96c61cbd0f SUNRPC: Fix a typo in cache_pipefs_files
We want the channel to be a regular file, so that we don't need to supply
rpc_pipe_ops.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-19 18:22:15 -04:00
Trond Myklebust 6a396f67d2 Merge branch 'nfsv4_xdr_cleanups-for-2.6.32' into nfs-for-2.6.32
Conflicts:
	fs/nfs/nfs4xdr.c
2009-08-19 18:21:52 -04:00
Dmitry Eremin-Solenikov 929122cdd5 Drop ARPHRD_IEEE802154_PHY
There are not maste devices in mac802154 anymore, so drop
ARPHRD_IEEE802154_PHY definition.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:24 +04:00
Dmitry Eremin-Solenikov 16eea493da ieee802154: add support for channel pages from IEEE 802.15.4-2006
IEEE 802.15.4-2006 adds new concept: channel pages, which can contain several
channels. Add support for channel pages in the API and in the fakehard driver.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:22 +04:00
Dmitry Eremin-Solenikov 2bfb1070ba ieee802154: add a sysfs representation of WPAN master devices
Add a sysfs/in-kernel representation of LR-WPAN master devices.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:20 +04:00
David S. Miller 08fdef9934 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-08-18 16:29:16 -07:00
Linus Torvalds 8486a0f95c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (60 commits)
  net: restore gnet_stats_basic to previous definition
  NETROM: Fix use of static buffer
  e1000e: fix use of pci_enable_pcie_error_reporting
  e1000e: WoL does not work on 82577/82578 with manageability enabled
  cnic: Fix locking in init/exit calls.
  cnic: Fix locking in start/stop calls.
  bnx2: Use mutex on slow path cnic calls.
  cnic: Refine registration with bnx2.
  cnic: Fix symbol_put_addr() panic on ia64.
  gre: Fix MTU calculation for bound GRE tunnels
  pegasus: Add new device ID.
  drivers/net: fixed drivers that support netpoll use ndo_start_xmit()
  via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULL
  rt2x00: fix memory corruption in rf cache, add a sanity check
  ixgbe: Fix receive on real device when VLANs are configured
  ixgbe: Do not return 0 in ixgbe_fcoe_ddp() upon FCP_RSP in DDP completion
  netxen: free napi resources during detach
  netxen: remove netxen workqueue
  ixgbe: fix issues setting rx-usecs with legacy interrupts
  can: fix oops caused by wrong rtnl newlink usage
  ...
2009-08-18 13:55:01 -07:00
Eric Dumazet c1a8f1f1c8 net: restore gnet_stats_basic to previous definition
In 5e140dfc1f "net: reorder struct Qdisc
for better SMP performance" the definition of struct gnet_stats_basic
changed incompatibly, as copies of this struct are shipped to
userland via netlink.

Restoring old behavior is not welcome, for performance reason.

Fix is to use a private structure for kernel, and
teach gnet_stats_copy_basic() to convert from kernel to user land,
using legacy structure (struct gnet_stats_basic)

Based on a report and initial patch from Michael Spang.

Reported-by: Michael Spang <mspang@csclub.uwaterloo.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17 21:33:49 -07:00
Ralf Baechle c6ba973b8f NETROM: Fix use of static buffer
The static variable used by nr_call_to_digi might result in corruption if
multiple threads are trying to usee a node or neighbour via ioctl.  Fixed
by having the caller pass a structure in.  This is safe because nr_add_node
rsp. nr_add_neigh will allocate a permanent structure, if needed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17 18:05:32 -07:00
Randy Dunlap ae6e2aef6c phonet: fix build when PROC_FS is disabled
Fix phonet build when PROC_FS is not enabled:

net/built-in.o: In function `pn_sock_open':
socket.c:(.text+0x23c649): undefined reference to `seq_open_net'
net/built-in.o:(.rodata+0x21018): undefined reference to `seq_release_net'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17 17:48:25 -07:00
Abhishek Kulkarni 0aad37ef3d net/9p: insulate the client against an invalid error code sent by a 9p server
A looney tunes server sending an invalid error code (which is !IS_ERR_VALUE)
can result in a client oops. So fix it by adding a check and converting unknown
or invalid error codes to -ESERVERFAULT.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-08-17 16:39:54 -05:00
Abhishek Kulkarni 0e15597ebf 9p: minor comment fixes
Fix the comments -- mostly the improper and/or missing descriptions
of function parameters.

Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-08-17 16:27:57 -05:00
Johannes Berg 523d2f6982 mac80211: fix todo lock
The key todo lock can be taken from different locks
that require it to be _bh to avoid lock inversion
due to (soft)irqs.

This should fix the two problems reported by Bob and
Gabor:
http://mid.gmane.org/20090619113049.GB18956@hash.localnet
http://mid.gmane.org/4A3FA376.8020307@openwrt.org

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Bob Copeland <me@bobcopeland.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-17 13:38:34 -04:00
Tom Goff 8cdb045632 gre: Fix MTU calculation for bound GRE tunnels
The GRE header length should be subtracted when the tunnel MTU is
calculated.  This just corrects for the associativity change
introduced by commit 42aa916265
("gre: Move MTU setting out of ipgre_tunnel_bind_dev").

Signed-off-by: Tom Goff <thomas.goff@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 16:41:18 -07:00
Oliver Hartkopp 1758c09476 can: Use WARN_ONCE() instead of BUG_ON() for sanity check in receive path
To ensure a proper handling of CAN frames transported in skbuffs some checks
need to be performed at receive time.

As stated by Michael Olbrich and Luotao Fu BUG_ON() might be to restrictive.
This is right as we can just drop the non conform skbuff and the Kernel can
continue working.

This patch replaces the BUG_ON() with a WARN_ONCE() so that the system remains
healthy but we made the problem visible (once).

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Urs Thuermann <urs@isnogud.escape.de>
CC: Michael Olbrich <m.olbrich@pengutronix.de>
CC: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 16:36:57 -07:00
Vasu Dev b85daa5324 vlan: adds fcoe offload related net_device_ops and updates fcoe_ddp_xid field
Adds fcoe offload related net_device_ops functions vlan_dev_fcoe_ddp_setup
and vlan_dev_fcoe_ddp_done, their implementation simply calls real eth device
net_device_ops for FCoE DDP setup and done operations.

Updates VLAN netdev field value for fcoe_ddp_xid from real eth device netdev.

Above changes are required for fcoe DDP offload working on a VLAN interface.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14 16:12:06 -07:00
David S. Miller cf99111661 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-08-14 16:07:21 -07:00
David S. Miller a8519de4a0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-08-14 12:29:17 -07:00
Benny Halevy 98866b5abe sunrpc: ntoh -> be*_to_cpu
ntohl is already defined as be32_to_cpu.
be64_to_cpu has architecture specific optimized implementations.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-14 13:12:52 -04:00
Benny Halevy 9f162d2a81 sunrpc: hton -> cpu_to_be*
htonl is already defined as cpu_to_be32.
cpu_to_be64 has architecture specific optimized implementations.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-14 13:12:38 -04:00
Johannes Berg 16cb9d42b6 cfg80211: allow driver to override PS default
Sometimes drivers might have a good reason to override
the PS default, like iwlwifi right now where it affects
RX performance significantly at this point. This will
allow them to override the default, if desired, in a
way that users can still change it according to their
trade-off choices, not the driver's, like would happen
if the driver just disabled PS completely then.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:08 -04:00
Johannes Berg 36e6fea849 cfg80211: check for and abort dangling scan requests
If you trigger a scan request on an interface and then
take it down, or rmmod the module or unplug the device
the driver might "forget" to cancel the scan request.
That is a bug in the driver, but the current behaviour
is that we just hang endlessly waiting for the netdev
refcount to become 0 which it never will. To improve
robustness, check for this situation in cfg80211, warn
about it and clean up behind the driver. I don't just
clean up silently because it's likely that the driver
also has some internal state it has now leaked.

Additionally, this fixes a locking bug, clearing the
scan_req pointer should be done under the rdev lock.

Finally, we also need to _wait_ for the scan work and
not just abort it since it might be pending and wanting
to do a cleanup.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:07 -04:00
David Woo 70bdb6b275 mac80211: Fix invalid length passed to IE parser for PLINK CONFIRM frames
The length of the fixed portion of plink confirm frames is 4 bytes longer than
the other plink_action frames.  This path corrects an error in the length
adjustment done for these type of frames.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:06 -04:00
David Woo 57ef5ddb45 mac80211: Mark a destination sequence number as valid when a PREQ is received.
If a PREQ frame is received giving us a fresher DSN than what we have, record
the new dsn and mark it as valid.  This patch fixes a bug in the setting of the
MESH_PATH_DSN_VALID flag.

Also, minor fix to coding style on that file.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:06 -04:00
Javier Cardona cca89496a8 mac80211: Fix unresolved mesh frames queued without valid control.vif
Mesh frames that could not be immediately resolved were queued with a NULL
info->control.vif.  This patch moves the call to mesh_nexthop_lookup closer to
the point where it is handed over to ieee80211_tx().  This ensures that the
unresolved frames are ready to be sent once the path is resolved.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:03 -04:00
Thadeu Lima de Souza Cascardo 1fe90b033e trivial: remove duplicate "different" from comment
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:02 -04:00
Javier Cardona 18889231e4 mac80211: Move mpath and mpp growth to mesh workqueue.
This prevents calling rcu_synchronize from within the tx path by moving the
table growth code to the mesh workqueue.

Move mesh_table_free and mesh_table_grow from mesh.c to mesh_pathtbl.c and
declare them static.

Also, re-enable mesh in Kconfig and update the configuration description.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Tested-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:01 -04:00
Javier Cardona 5b36583425 mac80211: Assign a default mesh beaconing interval.
The mesh stack was enabling beaconing without specifying an interval.  This
patch defines a default beaconing interval of 1s.

Incidentally, this fixes mesh beaconing in mac80211_hwsim devices.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:01 -04:00
Javier Cardona 5815814bfa mac80211: Early detection of broken mesh paths when using minstrel.
This change triggers a path discovery as soon as the link quality degrades
below a certain threshold.  This results in a faster path recovery time than
by simply relying on the periodic path refresh mechanism to detect broken
links.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:01 -04:00
Javier Cardona d403a1c66e mac80211: Update the station failed frames average when minstrel is used.
The fail_avg value is used to compute the mesh metric, and was only being set
by the pid rate control module. This fixes the mesh path selection mechanism
for cards that use mistrel for rate control.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:00 -04:00
Javier Cardona 3c5772a527 mac80211: Use 3-address format for mesh broadcast frames.
The 11s task group recently changed the frame mesh multicast/broadcast frame
format to use 3-address.  This was done to avoid interactions with widely
deployed lazy-WDS access points.

This patch changes the format of group addressed frames, both mesh-originated
and proxied, to use the data format defined in draft D2.08 and forward.  The
address fields used for group addressed frames is:

In 802.11 header
 ToDS:0  FromDS:1
 addr1: DA  (broadcast/multicast address)
 addr2: TA
 addr3: Mesh SA

In address extension header:
 addr4: SA  (only present if frame was proxied)

Note that this change breaks backward compatibility with earlier mesh stack
versions.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:14:00 -04:00
Andrey Yurovsky a9e3091bf0 mac80211: Use correct sign for mesh active path refresh.
On locally originated traffic, we refresh active paths after a timeout.  The
decision to do this was using the wrong sign and therefore the refresh timer
was triggered for every frame.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:59 -04:00
Javier Cardona fe58343461 mac80211: Improve dequeing from mpath frame queue.
Also, fix typo in comment.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Tested-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:58 -04:00
Johannes Berg 62b1208e14 mac80211: small tx code cleanup
It's really easier to read if it's not indented
as much, so invert the condition and rearrange
the code so the smaller chunk is indented instead.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:58 -04:00
Johannes Berg d0b69609dc mac80211: sequence number micro-optimisation
There's no need to mask the variable with 0xFFF0
since we ever only use it as a u16 and the lowest
four bits can't ever be non-zero. The compiler
cannot infer the latter, and therefore has to emit
code to do the masking.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:57 -04:00
Johannes Berg feff1f2fea mac80211: take statistics before encryption
When encryption is used, the number of bytes
sent to the peer increases by the IV and ICV.
This is accounted if software encryption is
used, but not if the devices does hardware
encryption. To make the numbers comparable,
never account for that overhead.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:57 -04:00
Johannes Berg aee83eaff8 cfg80211: add missing device list locking
When calling into the wext code from the NETDEV_UP
notifier, we need to hold the devlist_mtx mutex as
the wext code ends up calling into channel checks.

Reported-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:54 -04:00
Pat Erley d5b96a6f39 mac80211: remove max_bandwidth
This removes the max_bandwidth attribute.  It is only ever
written to, and is duplicated by max_bandwidth_khz in the
regulatory code.

Signed-off-by: Pat Erley <pat-lkml@erley.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:53 -04:00
Johannes Berg 4b181144e6 cfg80211: fix locking for SIWFREQ
"cfg80211: validate channel settings across interfaces"
contained a locking bug -- in the managed-mode SIWFREQ
call it would end up running into a lock recursion.

This fixes it by not checking that particular interface
for a channel that it needs to stay on, which is as it
should be as that's the interface we're setting the
channel for.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Kalle Valo <kalle.valo@iki.fi>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:51 -04:00
Johannes Berg 5ba63533bb cfg80211: fix alignment problem in scan request
The memory layout for scan requests was rather wrong,
we put the scan SSIDs before the channels which could
lead to the channel pointers being unaligned in memory.
It turns out that using a pointer to the channel array
isn't necessary anyway since we can embed a zero-length
array into the struct.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:44 -04:00
Johannes Berg ad5351db89 mac80211: allow DMA optimisation
If we have a lot of frames to transmit at once, for
instance with fragmentation, it can be an optimisation
to only tell the DMA engine about them on the last
fragment/frame to avoid banging the IO too much. This
patch allows implementation such an optimisation by
telling the driver when more frames can be expected.

Currently, this is used by mac80211 only on fragmented
frames, but could also be used in the future on other
frames when the queue was full and there are multiple
frames pending.

Note that drivers need to be careful when using this
flag, they need to kick their DMA engines not just
when this flag is clear, but also when the queue gets
full so that progress can be made.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:44 -04:00
Johannes Berg f5ea9120be nl80211: add generation number to all dumps
In order for userspace to be able to figure out whether
it obtained a consistent snapshot of data or not when
using netlink dumps, we need to have a generation number
in each dump message that indicates whether the list has
changed or not -- its value is arbitrary.

This patch adds such a number to all dumps, this needs
some mac80211 involvement to keep track of a generation
number to start with when adding/removing mesh paths or
stations.

The wiphy and netdev lists can be fully handled within
cfg80211, of course, but generation numbers need to be
stored there as well.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:43 -04:00
Johannes Berg f401a6f7ed cfg80211: use reassociation when possible
With the move of everything related to the SME from
mac80211 to cfg80211, we lost the ability to send
reassociation frames. This adds them back, but only
for wireless extensions. With the userspace SME, it
shall control assoc vs. reassoc (it already can do
so with the nl80211 interface).

I haven't touched the connect() implementation, so
it is not possible to reassociate with the nl80211
connect primitive. I think that should be done with
the NL80211_CMD_ROAM command, but we'll have to see
how that can be handled in the future, especially
with fullmac chips.

This patch addresses only the immediate regression
we had in mac80211, which previously sent reassoc.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:43 -04:00
Johannes Berg 59bbb6f757 cfg80211: validate channel settings across interfaces
Currently, there's a problem that affects regulatory
enforcement and connection stability, in that it is
possible to switch the channel while connected to a
network or joined to an IBSS.

The problem comes from the fact that we only validate
the channel against the current interface's type, not
against any other interface. Thus, you have any type
of interface up, additionally bring up a monitor mode
interface and switch the channel on the monitor. This
will obviously also switch the channel on the other
interface.

The problem now is that if you do that while sending
beacons for IBSS mode, you can switch to a disabled
channel or a channel that doesn't allow beaconing.
Combined with a managed mode interface connected to
an AP instead of an IBSS interface, you can easily
break the connection that way.

To fix this, this patch validates any channel change
with all available interfaces, and disallows such
changes on secondary interfaces if another interface
is connected to an AP or joined to an IBSS.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:13:42 -04:00
Samuel Ortiz bcba8eae12 cfg80211: Set WEP ciphers
With iwconfig there is no way to properly set the ciphers when trying to
connect to a WEP SSID. Although mac80211 based drivers dont need it, several
fullmac drivers do.
This patch basically sets the WEP ciphers whenever they're not set at all.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:47 -04:00
Johannes Berg b6f0b63908 cfg80211: fix SME association after disassociation
When an AP disassociates us, we currently go into a weird
state because the SME doesn't handle authenticated but not
associated well unless it's within its own state machine,
it can't recover from that. However, it shouldn't need to,
since we don't do any decisions in it really -- so when we
get disconnected, simply deauthenticate too.

Reported-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:47 -04:00
Johannes Berg e458b8a22d cfg80211: fix nl80211 disconnected events
When reporting a disconnection to userspace, we try
to report whether it was from the AP or by our own
choice. However, we misreported a broadcast deauth
or disassoc as being by own choice, which is wrong.
Fix this by checking the sender address instead of
the destination address.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:46 -04:00
Johannes Berg e21546a2a3 mac80211: stay authenticated after disassoc
After being disassociated by the AP, mac80211 currently
reports this to cfg80211, and then goes to delete the
association. That's fine, but cfg80211 assumes that it's
still authenticated, however, mac80211 throws away all
state.

This fixes mac80211 to keep track of the authentication
in that case so that cfg80211 can request a deauth or
new association properly.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:46 -04:00
Pavel Roskin b935df01ed cfg80211: fix disassociation warning due to misuse of wdev->current_bss
WARN_ON was triggered at mlme.c:213 when dissociating from an AP.

wdev->current_bss->pub.bssid should be used in place of
wdev->current_bss for BSSID comparison.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:45 -04:00
Zhu Yi a42dd7efd9 wireless: display wext SSID when connected by cfg80211
cfg80211 displays correct link info when connected by wext. But if
the connection is setup by cfg80211, wext cannot display the SSID.
This patch fixed this issue.

Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:41 -04:00
Luis R. Rodriguez c03e20fc9a mac80211: fix compilation of mesh (although its disabled)
Mesh is currently disabled on mac80211, its marked
as broken. This patch gets it to compile though,
to account for the mac80211 workqueue changes.
There was a simple typo in the patches for mesh
for the workqueue migration, but we never compile
tested it as we couldn't even select mesh as its
broken. Lets at least let it compile for those
interested in getting it fixed.

Reported-by: Pat Erley <pat-lkml@erley.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14 09:12:40 -04:00
Tejun Heo 384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Eric Paris a8f80e8ff9 Networking: use CAP_NET_ADMIN when deciding to call request_module
The networking code checks CAP_SYS_MODULE before using request_module() to
try to load a kernel module.  While this seems reasonable it's actually
weakening system security since we have to allow CAP_SYS_MODULE for things
like /sbin/ip and bluetoothd which need to be able to trigger module loads.
CAP_SYS_MODULE actually grants those binaries the ability to directly load
any code into the kernel.  We should instead be protecting modprobe and the
modules on disk, rather than granting random programs the ability to load code
directly into the kernel.  Instead we are going to gate those networking checks
on CAP_NET_ADMIN which still limits them to root but which does not grant
those processes the ability to load arbitrary code into the kernel.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-14 11:18:34 +10:00
Gerrit Renker 26ced1e4aa inet6: Set default traffic class
This patch addresses:
 * assigning -1 to np->tclass as it is currently done is not very meaningful,
   since it turns into 0xff;
 * RFC 3542, 6.5 allows -1 for clearing the sticky IPV6_TCLASS option
   and specifies -1 to mean "use kernel default":
   - RFC 2460, 7. requires that the default traffic class must be zero for
     all 8 bits,
   - this is consistent with RFC 2474, 4.1 which recommends a default PHB of 0,
     in combination with a value of the ECN field of "non-ECT" (RFC 3168, 5.).

This patch changes the meaning of -1 from assigning 255 to mean the RFC 2460
default, which at the same time allows to satisfy clearing the sticky TCLASS
option as per RFC 3542, 6.5.

(When passing -1 as ancillary data, the fallback remains np->tclass, which
 has either been set via socket options, or contains the default value.)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:43:32 -07:00
Gerrit Renker e651f03afe inet6: Conversion from u8 to int
This replaces assignments of the type "int on LHS" = "u8 on RHS" with
simpler code. The LHS can express all of the unsigned right hand side
values, hence the assigned value can not be negative.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:43:31 -07:00
Neil Horman e9b3cc1b37 net: skb ftracer - add tracepoint to skb_copy_datagram_iovec (v3)
skb allocation / cosumption tracer - Add consumption tracepoint

This patch adds a tracepoint to skb_copy_datagram_iovec, which is called each
time a userspace process copies a frame from a socket receive queue to a user
space buffer.  It allows us to hook in and examine each sk_buff that the system
receives on a per-socket bases, and can be use to compile a list of which skb's
were received by which processes.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/trace/events/skb.h |   20 ++++++++++++++++++++
 net/core/datagram.c        |    3 +++
 2 files changed, 23 insertions(+)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:26:14 -07:00
Fischer, Anna 3982d3d28b net/bridge: Add 'hairpin' port forwarding mode
This patch adds a 'hairpin' (also called 'reflective relay') mode
port configuration to the Linux Ethernet bridge kernel module.
A bridge supporting hairpin forwarding mode can send frames back
out through the port the frame was received on.

Hairpin mode is required to support basic VEPA (Virtual
Ethernet Port Aggregator) capabilities.

You can find additional information on VEPA here:
http://tech.groups.yahoo.com/group/evb/
http://www.ieee802.org/1/files/public/docs2009/new-hudson-vepa_seminar-20090514d.pdf
http://www.internet2.edu/presentations/jt2009jul/20090719-congdon.pdf

An additional patch 'bridge-utils: Add 'hairpin' port forwarding mode'
is provided to allow configuring hairpin mode from userspace tools.

Signed-off-by: Paul Congdon <paul.congdon@hp.com>
Signed-off-by: Anna Fischer <anna.fischer@hp.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:26:11 -07:00
Jens Rosenboom a6fa328665 ipv6: Log the explicit address that triggered DAD failure
If an interface has multiple addresses, the current message for DAD
failure isn't really helpful, so this patch adds the address itself to
the printk.

Signed-off-by: Jens Rosenboom <jens@mcbone.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:26:10 -07:00
Luis R. Rodriguez 416fbdff21 mac80211: fix panic when splicing unprepared TIDs
We splice skbs from the pending queue for a TID
onto the local pending queue when tearing down a
block ack request. This is not necessary unless we
actually have received a request to start a block ack
request (rate control, for example). If we never received
that request we should not be splicing the tid pending
queue as it would be null, causing a panic.

Not sure yet how exactly we allowed through a call when the
tid state does not have at least HT_ADDBA_REQUESTED_MSK set,
that will require some further review as it is not quite
obvious.

For more information see the bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=13922

This fixes this oops:

BUG: unable to handle kernel NULL pointer dereference at 00000030
IP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211]
*pdpt = 0000000002d1e001 *pde = 0000000000000000
Thread overran stack, or stack corrupted
Oops: 0000 [#1] SMP
last sysfs file: /sys/module/aes_generic/initstate
Modules linked in: <bleh>

Pid: 0, comm: swapper Not tainted (2.6.31-rc5-wl #2) Dell DV051
EIP: 0060:[<f8806c70>] EFLAGS: 00010292 CPU: 0
EIP is at ieee80211_agg_splice_packets+0x40/0xc0 [mac80211]
EAX: 00000030 EBX: 0000004c ECX: 00000003 EDX: 00000000
ESI: c1c98000 EDI: f745a1c0 EBP: c076be58 ESP: c076be38
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c076a000 task=c0709160 task.ti=c076a000)
Stack: <bleh2>
Call Trace:
 [<f8806edb>] ? ieee80211_stop_tx_ba_cb+0xab/0x150 [mac80211]
 [<f8802f1e>] ? ieee80211_tasklet_handler+0xce/0x110 [mac80211]
 [<c04862ff>] ? net_rx_action+0xef/0x1d0
 [<c0149378>] ? tasklet_action+0x58/0xc0
 [<c014a0f2>] ? __do_softirq+0xc2/0x190
 [<c018eb48>] ? handle_IRQ_event+0x58/0x140
 [<c01205fe>] ? ack_apic_level+0x7e/0x270
 [<c014a1fd>] ? do_softirq+0x3d/0x40
 [<c014a345>] ? irq_exit+0x65/0x90
 [<c010a6af>] ? do_IRQ+0x4f/0xc0
 [<c014a35d>] ? irq_exit+0x7d/0x90
 [<c011d547>] ? smp_apic_timer_interrupt+0x57/0x90
 [<c01094a9>] ? common_interrupt+0x29/0x30
 [<c010fd9e>] ? mwait_idle+0xbe/0x100
 [<c0107e42>] ? cpu_idle+0x52/0x90
 [<c054b1a5>] ? rest_init+0x55/0x60
 [<c077492d>] ? start_kernel+0x315/0x37d
 [<c07743ce>] ? unknown_bootoption+0x0/0x1f9
 [<c0774099>] ? i386_start_kernel+0x79/0x81
Code: <bleh3>
EIP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] SS:ESP 0068:c076be38
CR2: 0000000000000030

Cc: stable@kernel.org
Testedy-by: Jack Lau <jackelectronics@hotmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-13 14:47:42 -04:00
Linus Torvalds e694958388 Make sock_sendpage() use kernel_sendpage()
kernel_sendpage() does the proper default case handling for when the
socket doesn't have a native sendpage implementation.

Now, arguably this might be something that we could instead solve by
just specifying that all protocols should do it themselves at the
protocol level, but we really only care about the common protocols.
Does anybody really care about sendpage on something like Appletalk? Not
likely.

Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Julien TINNES <julien@cr0.org>
Acked-by: Tavis Ormandy <taviso@sdf.lonestar.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-13 10:57:26 -07:00
Rémi Denis-Courmont cb7d9e7f9b Phonet: fix /proc/net/phonet with network namespaces
seq_open_net() and seq_release() are needed for seq_file_net().

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 22:13:19 -07:00
Dmitry Baryshkov acb8aacda3 nl802154: support START-CONFIRM primitive
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:51 -07:00
Dmitry Baryshkov 99eb855864 af_ieee802154: add support for WANT_ACK socket option
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:50 -07:00
Dmitry Baryshkov 74eda55db4 af_ieee802154: minor cleanup in dgram_bind
1) fix ro->bound protection by socket lock
2) make ro->bound bit instead of int

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:50 -07:00
Dmitry Baryshkov 8e753dd0a8 nl802154: add support for dumping WPAN interface information
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 21:54:49 -07:00
Dmitry Baryshkov 78090a58c4 nl802154: make ieee802154_policy constant
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 20:49:48 -07:00
Mark Smith 6885ffb3a1 Use correct NET_RX_* returns for atalk_rcv()
In all rx'd SKB cases, atalk_rcv() either eventually jumps to or falls through
    to the label out:, which  returns numeric 0. Numeric 0 corresponds to
    NET_RX_SUCCESS, which is incorrect in failed SKB cases.

    This patch makes atalk_rcv() provide the correct returns by:

    o  explicitly returning NET_RX_SUCCESS in the two success cases
    o  having the out: label return NET_RX_DROP, instead of numeric 0
    o  making the failed SKB labels and processing more consistent with other
       _rcv() routines in the kernel, simplifying validation and removing a
       backwards goto

Signed-off-by: Mark Smith <markzzzsmith@yahoo.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12 20:44:50 -07:00
David S. Miller aa11d958d1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	arch/microblaze/include/asm/socket.h
2009-08-12 17:44:53 -07:00
Trond Myklebust f884dcaead Merge branch 'sunrpc_cache-for-2.6.32' into nfs-for-2.6.32 2009-08-10 17:45:58 -04:00
Trond Myklebust 976a6f921c Merge branch 'patches_cel-for-2.6.32' into nfs-for-2.6.32 2009-08-10 17:45:50 -04:00
Patrick McHardy dc05a564ab Merge branch 'master' of git://dev.medozas.de/linux 2009-08-10 17:14:59 +02:00
Jan Engelhardt e2fe35c17f netfilter: xtables: check for standard verdicts in policies
This adds the second check that Rusty wanted to have a long time ago. :-)

Base chain policies must have absolute verdicts that cease processing
in the table, otherwise rule execution may continue in an unexpected
spurious fashion (e.g. next chain that follows in memory).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:31 +02:00
Jan Engelhardt 90e7d4ab5c netfilter: xtables: check for unconditionality of policies
This adds a check that iptables's original author Rusty set forth in
a FIXME comment.

Underflows in iptables are better known as chain policies, and are
required to be unconditional or there would be a stochastical chance
for the policy rule to be skipped if it does not match. If that were
to happen, rule execution would continue in an unexpected spurious
fashion.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:29 +02:00
Jan Engelhardt a7d51738e7 netfilter: xtables: ignore unassigned hooks in check_entry_size_and_hooks
The "hook_entry" and "underflow" array contains values even for hooks
not provided, such as PREROUTING in conjunction with the "filter"
table. Usually, the values point to whatever the next rule is. For
the upcoming unconditionality and underflow checking patches however,
we must not inspect that arbitrary rule.

Skipping unassigned hooks seems like a good idea, also because
newinfo->hook_entry and newinfo->underflow will then continue to have
the poison value for detecting abnormalities.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:28 +02:00
Jan Engelhardt 47901dc2c4 netfilter: xtables: use memcmp in unconditional check
Instead of inspecting each u32/char open-coded, clean up and make use
of memcmp. On some arches, memcmp is implemented as assembly or GCC's
__builtin_memcmp which can possibly take advantages of known
alignment.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:27 +02:00
Jan Engelhardt e5afbba186 netfilter: iptables: remove unused datalen variable
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:25 +02:00
Jan Engelhardt f88e6a8a50 netfilter: xtables: switch table AFs to nfproto
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:23 +02:00
Jan Engelhardt 24c232d8e9 netfilter: xtables: switch hook PFs to nfproto
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:21 +02:00
Jan Engelhardt 57750a22ed netfilter: conntrack: switch hook PFs to nfproto
Simple substitution to indicate that the fields indeed use the
NFPROTO_ space.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:35:20 +02:00
Jan Engelhardt 6461caed83 netfilter: xtables: remove xt_owner v0
Superseded by xt_owner v1 (v2.6.24-2388-g0265ab4).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:32:30 +02:00
Jan Engelhardt 4725c7287e netfilter: xtables: remove xt_mark v0
Superseded by xt_mark v1 (v2.6.24-2922-g17b0d7e).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:09:45 +02:00
Jan Engelhardt 36d4084dc8 netfilter: xtables: remove xt_iprange v0
Superseded by xt_iprange v1 (v2.6.24-2928-g1a50c5a1).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:09:44 +02:00
Jan Engelhardt 9e05ec4b18 netfilter: xtables: remove xt_conntrack v0
Superseded by xt_conntrack v1 (v2.6.24-2921-g64eb12f).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 13:09:44 +02:00
Jan Engelhardt 84899a2b9a netfilter: xtables: remove xt_connmark v0
Superseded by xt_connmark v1 (v2.6.24-2919-g96e3227).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 12:25:12 +02:00
Jan Engelhardt c8001f7fd5 netfilter: xtables: remove xt_MARK v0, v1
Superseded by xt_MARK v2 (v2.6.24-2918-ge0a812a).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 12:25:12 +02:00
Jan Engelhardt e973a70ca0 netfilter: xtables: remove xt_CONNMARK v0
Superseded by xt_CONNMARK v1 (v2.6.24-2917-g0dc8c76).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 12:25:11 +02:00
Jan Engelhardt 7cd1837b5d netfilter: xtables: remove xt_TOS v0
Superseded by xt_TOS v1 (v2.6.24-2396-g5c350e5).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2009-08-10 12:25:11 +02:00
Tobias Klauser be39ee11cd netfilter: ebtables: Use %pM conversion specifier
ebt_log uses its own implementation of print_mac to print MAC addresses.
This patch converts it to use the %pM conversion specifier for printk.

Signed-off-by: Tobias Klauser <klto@zhaw.ch>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-10 10:10:55 +02:00
Rafael Laufer 549812799c netfilter: nf_conntrack: add SCTP support for SO_ORIGINAL_DST
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-08-10 10:08:27 +02:00
Rafael Laufer 418372b0ab sctp: fix missing destroy of percpu counter variable in sctp_proc_exit()
Commit 1748376b66,
	net: Use a percpu_counter for sockets_allocated

added percpu_counter function calls to sctp_proc_init code path, but
forgot to add them to sctp_proc_exit().  This resulted in a following
Ooops when performing this test
	# modprobe sctp
	# rmmod -f sctp
	# modprobe sctp

[  573.862512] BUG: unable to handle kernel paging request at f8214a24
[  573.862518] IP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70
[  573.862530] *pde = 37010067 *pte = 00000000
[  573.862534] Oops: 0002 [#1] SMP
[  573.862537] last sysfs file: /sys/module/libcrc32c/initstate
[  573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge
stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy
snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event
yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device
mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw
pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp
nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb
ohci1394 ieee1394 e1000e [last unloaded: sctp]
[  573.862589]
[  573.862593] Pid: 5373, comm: modprobe Tainted: P  R        (2.6.31-rc3 #6)
7663B15
[  573.862596] EIP: 0060:[<c0308b8f>] EFLAGS: 00010286 CPU: 1
[  573.862599] EIP is at __percpu_counter_init+0x3f/0x70
[  573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20
[  573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec
[  573.862606]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70
task.ti=f69d4000)
[  573.862612] Stack:
[  573.862613]  00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30
c018e2d4
[  573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000
c07029c0 fffffffb
[  573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860
00000001 c07010c0
[  573.862634] Call Trace:
[  573.862644]  [<f80a70a8>] ? sctp_init+0xa8/0x7d4 [sctp]
[  573.862650]  [<c018e2d4>] ? marker_update_probe_range+0x184/0x260
[  573.862659]  [<f80a7000>] ? sctp_init+0x0/0x7d4 [sctp]
[  573.862662]  [<c010112b>] ? do_one_initcall+0x2b/0x160
[  573.862666]  [<c018f83f>] ? tracepoint_module_notify+0x2f/0x40
[  573.862671]  [<c0557cad>] ? notifier_call_chain+0x2d/0x70
[  573.862678]  [<c01588fd>] ? __blocking_notifier_call_chain+0x4d/0x60
[  573.862682]  [<c016b2f1>] ? sys_init_module+0xb1/0x1f0
[  573.862686]  [<c0102ffc>] ? sysenter_do_call+0x12/0x28
[  573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85
c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50
04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4
[  573.862725] EIP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 SS:ESP
0068:f69d5eec
[  573.862730] CR2: 00000000f8214a24
[  573.862734] ---[ end trace 39c4e0b55e7cf54d ]---

Signed-off-by: Rafael Laufer <rlaufer@cisco.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09 21:45:43 -07:00
Eric Dumazet e84b90ae5e can: Fix raw_getname() leak
raw_getname() can leak 10 bytes of kernel memory to user

(two bytes hole between can_family and can_ifindex,
8 bytes at the end of sockaddr_can structure)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09 21:45:32 -07:00
Jussi Mäki b79a79471b Fix xfrm hash collisions by changing __xfrm4_daddr_saddr_hash to hash addresses with addition
This patch fixes hash collisions in cases where number
of entries have incrementing IP source and destination addresses
from single respective subnets (i.e. 192.168.0.1-172.16.0.1,
192.168.0.2-172.16.0.2, and so on.).

Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09 21:45:31 -07:00
David S. Miller f222e8b40f Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-08-09 21:29:47 -07:00
Trond Myklebust 8854e82d9a SUNRPC: Add an rpc_pipefs front end for the sunrpc cache code
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:30 -04:00
Trond Myklebust 173912a6ad SUNRPC: Move procfs-specific stuff out of the generic sunrpc cache code
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:29 -04:00
Trond Myklebust bc74b4f5e6 SUNRPC: Allow the cache_detail to specify alternative upcall mechanisms
For events that are rare, such as referral DNS lookups, it makes limited
sense to have a daemon constantly listening for upcalls on a channel. An
alternative in those cases might simply be to run the app that fills the
cache using call_usermodehelper_exec() and friends.

The following patch allows the cache_detail to specify alternative upcall
mechanisms for these particular cases.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:29 -04:00
Trond Myklebust da77005f0d SUNRPC: Remove the global temporary write buffer in net/sunrpc/cache.c
While we do want to protect against multiple concurrent readers and writers
on each upcall/downcall pipe, we don't want to limit concurrent reading and
writing to separate caches.

This patch therefore replaces the static buffer 'write_buf', which can only
be used by one writer at a time, with use of the page cache as the
temporary buffer for downcalls. We still fall back to using the the old
global buffer if the downcall is larger than PAGE_CACHE_SIZE, since this is
apparently needed by the SPKM security context initialisation.

It then replaces the use of the global 'queue_io_mutex' with the
inode->i_mutex in cache_read() and cache_write().

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:28 -04:00
Trond Myklebust 5b7a1b9f92 SUNRPC: Ensure we initialise the cache_detail before creating procfs files
Also ensure that we destroy those files before we destroy the cache_detail.
Otherwise, user processes might attempt to write into uninitialised caches.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:27 -04:00
Trond Myklebust 2da8ca26c6 NFSD: Clean up the idmapper warning...
What part of 'internal use' is so hard to understand?

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:26 -04:00
Trond Myklebust e57aed77ad SUNRPC: One more clean up for rpc_create_client_dir()
In order to allow rpc_pipefs to create directories with different types of
subtrees, it is useful to allow the caller to customise the subtree filling
process.
In order to do so, we separate out the parts which are specific to making
an RPC client directory, and put them in a separate helper, then we convert
the process of filling the directory contents into a callback.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:26 -04:00
Trond Myklebust 23ac658170 SUNRPC: clean up rpc_setup_pipedir()
There is still a little wart or two there: Since we've already got a
vfsmount, we might as well pass that in to rpc_create_client_dir.
Another point is that if we open code __rpc_lookup_path() here, then we can
avoid looking up the entire parent directory path over and over again: it
doesn't change.

Also get rid of rpc_clnt->cl_pathname, since it has no users...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:25 -04:00
Trond Myklebust 7d217caca5 SUNRPC: Replace rpc_client->cl_dentry and cl_mnt, with a cl_path
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:24 -04:00
Trond Myklebust 7d59d1e865 SUNRPC: Clean up rpc_create_client_dir()
Factor out the code that does lookups from the code that actually creates
the directory.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:23 -04:00
Trond Myklebust 458adb8ba9 SUNRPC: Rename rpc_mkdir to rpc_create_client_dir()
This reflects the fact that rpc_mkdir() as it stands today, can only create
a RPC client type directory.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:22 -04:00
Trond Myklebust bb1567491e SUNRPC: rpc_pipefs cleanup
Move the files[] array closer to rpc_fill_super()

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:21 -04:00
Trond Myklebust ac6fecee31 SUNRPC: Clean up rpc_populate/depopulate
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:20 -04:00
Trond Myklebust cfeaa4a3ca SUNRPC: Clean up rpc_lookup_create
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:20 -04:00
Trond Myklebust 810d90bc2a SUNRPC: Clean up rpc_unlink()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:18 -04:00
Trond Myklebust 7589806e96 SUNRPC: Clean up file creation code in rpc_pipefs
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:17 -04:00
Trond Myklebust b5bb61da2e SUNRPC: Clean up rpc_pipefs lookup code...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:17 -04:00
Trond Myklebust 7364af6a2d SUNRPC: Allow rpc_pipefs_ops to have null values for upcall and downcall
Also ensure that we use the umode_t type when appropriate...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:16 -04:00
Trond Myklebust b693ba4a33 SUNRPC: Constify rpc_pipe_ops...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:14:15 -04:00
Chuck Lever c05988cdb0 SUNRPC: Add documenting comments in net/sunrpc/timer.c
Clean up: provide documenting comments for the functions in
net/sunrpc/timer.c.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:47 -04:00
Chuck Lever 9dc3b095b7 SUNRPC: Update xprt address strings after an rpcbind completes
After a bind completes, update the transport instance's address
strings so debugging messages display the current port the transport
is connected to.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-08-09 15:09:46 -04:00