Commit Graph

1728 Commits

Author SHA1 Message Date
Yegor Yefremov 66169ad17d serial: add support for various Titan PCI cards
serial: add support for various Titan PCI cards

Models: 200I, 400I, 800I, 400EH, 800EH, 800EHB,
        100E, 200E, 400E, 800E, 200EI, 200EISI

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:18 -07:00
Tobias Klauser c1bfffa94e serial: altera_uart: Proper section for altera_uart_remove
altera_uart_remove should be in .devexit.text

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:18 -07:00
Tobias Klauser fadf34f0f0 altera_uart: Simplify altera_uart_console_putc
The check for the TRDY flag after writing the character is not needed.
Also do a cpu_relax() inside the loop.

Pass a struct uart_port to altera_uart_console_putc, so we do not need
to get it (and dereference pointers) for every character.

Cc: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:18 -07:00
Tobias Klauser d8d721f4c0 altera_uart: Don't take spinlock in already protected functions
Don't take the port spinlock in uart functions where the serial core
already takes care of locking/unlocking them.

The code would actually lock up on architectures where spinlocks are
implemented (not the case on nios2 where this driver is primarily used
for now, thus this bug didn't trigger).

Also protect calling altera_uart_rx_chars/altera_uart_tx_chars in the
interrupt handler by the port spinlock.

Thanks to Ian Abbott for pointing these issues out.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:17 -07:00
Sonic Zhang e59e2bd9e8 serial: bfin_5xx: fix typo in IER check
This most likely won't cause problems on systems as people don't typically
enable GPIO RTS/CTS if they don't actually use it.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:17 -07:00
Graf Yang ca3e442e8d serial: bfin_5xx: IRDA is not affected by anomaly 05000230
Anomaly 05000230 (over sampling of the UART STOP bit) applies only when
the peripheral is operating in UART mode.  So drop the anomaly handling
when the UART is in IRDA mode.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:17 -07:00
Alexander Kurz 99ec88f345 serial_cs: add and sort IDs for serial and modem cards
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:16 -07:00
Abhijeet Dharmapurikar 18c79d76ec msm_serial: fix serial on trout
Set the mnd counter based on uartclk. This fixes a problem
on 7x30 where the uartclk is 19.2Mhz rather than the usual
4.8Mhz.

Trout incorrectly reports uartclk to be running at 19.2Mhz
It is actually running at 4.8Mhz.  For trout force mnd
counter values as if uartclk was fed by tcxo/4.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
[dwalker@codeaurora.org: inlined, moved into header, added comments.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-04 13:37:16 -07:00
Benjamin Herrenschmidt c2cdf6aba0 powerpc/macio: Fix probing of macio devices by using the right of match table
Grant patches added an of mach table to struct device_driver. However,
while he changed the macio device code to use that, he left the match
table pointer in struct macio_driver and didn't update drivers to use
the "new" one, thus breaking the probing.

This completes the change by moving all drivers to setup the "new"
one, removing all traces of the old one, and while at it (since it
changes the exact same locations), I also remove two other duplicates
from struct driver which are the name and owner fields.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02 17:50:38 +10:00
Marek Szyprowski 5d66ceee78 ARM: S5PV210: serial: Fix section mismatch warning
Rename the structure to avoid the following warning:

WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove()
The variable s5p_serial_drv references
the function __devexit s3c24xx_serial_remove()
If the reference is valid then annotate the
variable with __exit* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-28 19:40:05 +09:00
Linus Torvalds 702c0b0497 Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/xilinx: Fix compile error
  spi/davinci: Fix clock prescale factor computation
  spi: move bitbang txrx utility functions to private header
  spi/mpc5121: Add SPI master driver for MPC5121 PSC
  powerpc/mpc5121: move PSC FIFO memory init to platform code
  spi/ep93xx: implemented driver for Cirrus EP93xx SPI controller
  Documentation/spi/* compile warning fix
  spi/omap2_mcspi: Check params before dereference or use
  spi/omap2_mcspi: add turbo mode support
  spi/omap2_mcspi: change default DMA_MIN_BYTES value to 160
  spi/pl022: fix stop queue procedure
  spi/pl022: add support for the PL023 derivate
  spi/pl022: fix up differences between ARM and ST versions
  spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dma
  spi/spi_mpc8xxx: Fix QE mode Litte Endian
  spi/spi_mpc8xxx: fix potential memory corruption.
2010-05-25 12:04:17 -07:00
Greg Ungerer e9a137cb00 m68knommu: fix broken use of BUAD_TABLE_SIZE in 68328serial driver
Commit 8b505ca8e2 ("serial: 68328serial.c:
remove BAUD_TABLE_SIZE macro") misses one use of BAUD_TABLE_SIZE.  So the
resulting 68328serial.c does not compile:

drivers/serial/68328serial.c: In function `m68328_console_setup':
drivers/serial/68328serial.c:1439: error: `BAUD_TABLE_SIZE' undeclared (first use in this function)
drivers/serial/68328serial.c:1439: error: (Each undeclared identifier is reported only once
drivers/serial/68328serial.c:1439: error: for each function it appears in.)

Fix that last use of it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: Thiago Farina <tfransosi@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:02 -07:00
Grant Likely b1e50ebcf2 Merge remote branch 'origin' into secretlab/next-spi 2010-05-25 00:38:26 -06:00
Anatolij Gustschin 2da8cb6af5 powerpc/mpc5121: move PSC FIFO memory init to platform code
Since PSC could also be used in other modes than UART mode
we move PSC FIFO memory initialization from serial driver to
common platform code. The initialized FIFO memory slices may
not overlap, so the most easy way would be to configure them
all at once at init time for all PSC devices. This is now done
by this patch.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25 00:23:16 -06:00
Linus Torvalds 0fed2b5cb4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits)
  sh: fix up sh7785lcr_32bit_defconfig.
  arch/sh/lib/strlen.S: Checkpatch cleanup
  sh: fix up sh7786 dmaengine build.
  sh: guard cookie consistency across termination in the DMA driver
  sh: prevent the DMA driver from unloading, while in use
  sh: fix Oops in the serial SCI driver
  sh: allow platforms to specify SD-card supported voltages
  mmc: let MFD's provide supported Vdd card voltages to tmio_mmc
  sh: disable SD-card write-protection detection on kfr2r09
  mfd: pass platform flags down to the tmio_mmc driver
  tmio: add a platform flag to disable card write-protection detection
  sh: Add SDHI DMA support to migor
  sh: Add SDHI DMA support to kfr2r09
  sh: Add SDHI DMA support to ms7724se
  sh: Add SDHI DMA support to ecovec
  mmc: add DMA support to tmio_mmc driver, when used on SuperH
  sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c
  mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell
  sh: add DMA slave definitions to sh7724
  sh: add DMA slaves for two SDHI controllers to sh7722
  ...
2010-05-24 07:58:28 -07:00
Guennadi Liakhovetski 85b8e3ffc4 sh: fix Oops in the serial SCI driver
Fix an Oops, triggering, if the DMA buffer allocation for the Rx channel in
sh-sci.c fails.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22 17:06:34 +09:00
Grant Likely cf9b59e9d3 Merge remote branch 'origin' into secretlab/next-devicetree
Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22 00:36:56 -06:00
Grant Likely 4018294b53 of: Remove duplicate fields from of_platform_driver
.name, .match_table and .owner are duplicated in both of_platform_driver
and device_driver.  This patch is a removes the extra copies from struct
of_platform_driver and converts all users to the device_driver members.

This patch is a pretty mechanical change.  The usage model doesn't change
and if any drivers have been missed, or if anything has been fixed up
incorrectly, then it will fail with a compile time error, and the fixup
will be trivial.  This patch looks big and scary because it touches so
many files, but it should be pretty safe.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-22 00:10:40 -06:00
Linus Torvalds 6f68fbaafb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  DMAENGINE: extend the control command to include an arg
  async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
  DMAENGINE: DMA40 fix for allocation of logical channel 0
  DMAENGINE: DMA40 support paused channel status
  dmaengine: mpc512x: Use resource_size
  DMA ENGINE: Do not reset 'private' of channel
  ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
  ioat3: disable cacheline-unaligned transfers for raid operations
  ioat2,3: convert to producer/consumer locking
  ioat: convert to circ_buf
  DMAENGINE: Support for ST-Ericssons DMA40 block v3
  async_tx: use of kzalloc/kfree requires the include of slab.h
  dmaengine: provide helper for setting txstate
  DMAENGINE: generic channel status v2
  DMAENGINE: generic slave control v2
  dma: timb-dma: Update comment and fix compiler warning
  dma: Add timb-dma
  DMAENGINE: COH 901 318 fix bytesleft
  DMAENGINE: COH 901 318 rename confusing vars
2010-05-21 17:05:46 -07:00
Linus Torvalds 79c4581262 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits)
  powerpc: Remove unused 'protect4gb' boot parameter
  powerpc: Build-in e1000e for pseries & ppc64_defconfig
  powerpc/pseries: Make request_ras_irqs() available to other pseries code
  powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity
  powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim
  powerpc: Use smt_snooze_delay=-1 to always busy loop
  powerpc: Remove check of ibm,smt-snooze-delay OF property
  powerpc/kdump: Fix race in kdump shutdown
  powerpc/kexec: Fix race in kexec shutdown
  powerpc/kexec: Speedup kexec hash PTE tear down
  powerpc/pseries: Add hcall to read 4 ptes at a time in real mode
  powerpc: Use more accurate limit for first segment memory allocations
  powerpc/kdump: Use chip->shutdown to disable IRQs
  powerpc/kdump: CPUs assume the context of the oopsing CPU
  powerpc/crashdump: Do not fail on NULL pointer dereferencing
  powerpc/eeh: Fix oops when probing in early boot
  powerpc/pci: Check devices status property when scanning OF tree
  powerpc/vio: Switch VIO Bus PM to use generic helpers
  powerpc: Avoid bad relocations in iSeries code
  powerpc: Use common cpu_die (fixes SMP+SUSPEND build)
  ...
2010-05-21 11:17:05 -07:00
Linus Torvalds ac3ee84c60 Merge branch 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  echi-dbgp: Add kernel debugger support for the usb debug port
  earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb
  kgdboc: Add ekgdboc for early use of the kernel debugger
  x86,early dr regs,kgdb: Allow kernel debugger early dr register access
  x86,kgdb: Implement early hardware breakpoint debugging
  x86, kgdb, init: Add early and late debug states
  x86, kgdb: early trap init for early debug
2010-05-21 11:10:41 -07:00
Linus Torvalds 90b9a32d8f Merge branch 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits)
  kdb,debug_core: Allow the debug core to receive a panic notification
  MAINTAINERS: update kgdb, kdb, and debug_core info
  debug_core,kdb: Allow the debug core to process a recursive debug entry
  printk,kdb: capture printk() when in kdb shell
  kgdboc,kdb: Allow kdb to work on a non open console port
  kgdb: Add the ability to schedule a breakpoint via a tasklet
  mips,kgdb: kdb low level trap catch and stack trace
  powerpc,kgdb: Introduce low level trap catching
  x86,kgdb: Add low level debug hook
  kgdb: remove post_primary_code references
  kgdb,docs: Update the kgdb docs to include kdb
  kgdboc,keyboard: Keyboard driver for kdb with kgdb
  kgdb: gdb "monitor" -> kdb passthrough
  sparc,sunzilog: Add console polling support for sunzilog serial driver
  sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
  kgdb,8250,pl011: Return immediately from console poll
  kgdb: core changes to support kdb
  kdb: core for kgdb back end (2 of 2)
  kdb: core for kgdb back end (1 of 2)
  kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin
  ...
2010-05-21 11:08:05 -07:00
Tobias Klauser e114474cf5 serial: bfin_sport_uart: Use resource size to fix off-by-one error
Use the resource_size function instead of manually calculating the
resource size. This actually fixes an off-by-one error.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:30 -07:00
Tobias Klauser 6b7d8f8b5c serial: Add driver for the Altera UART
Add an UART driver for the UART component available as a SOPC (System on
Programmable Chip) component for Altera FPGAs.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:30 -07:00
Tobias Klauser 5bcd601049 serial: Add driver for the Altera JTAG UART
Add an UART driver for the JTAG UART component available as a SOPC
(System on Programmable Chip) component for Altera FPGAs.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:30 -07:00
Richard Röjfors 24cd73a394 serial: timbuart: make sure last byte is sent when port is closed
Fix a problem in early versions of the FPGA IP.

In certain situations the IP reports that the FIFO is empty, but a byte is
still clocked out.  If a flush is done at that point the currently clocked
byte is canceled.

This causes incompatibilities with the upper layers when a port is closed,
it waits until the FIFO is empty and then closes the port.  During close
the FIFO is flushed -> the last byte is not sent properly.

Now the FIFO is only flushed if it is reported to be non-empty.  Which
makes the currently clocked out byte to finish.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:29 -07:00
Roel Kluin 4405199623 serial: two branches the same in timbuart_set_mctrl()
CTS is a read only bit and we are to stop signal RTS if modem line
TIOCM_RTS is not set.

Thanks for suggestions by Richard Röjfors.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:29 -07:00
John Linn e5bbbb18d8 serial: uartlite: move from byte accesses to word accesses
Byte accesses for I/O devices in Xilinx IP is going to be less
desired in the future such that the driver is being changed to
use 32 bit accesses.

This change facilitates using the uartlite IP over a PCIe bus
which only allows 32 bit accesses.

Signed-off-by: John Linn <john.linn@xilinx.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:29 -07:00
Mike Frysinger be991593f8 serial: bfin_sport_uart: drop redundant cpu depends
The BF54xM procs imply the related BF54x define, so no need to check both.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Mike Frysinger d671250b98 serial: bfin_sport_uart: drop the experimental markings
Should be stable now ...

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Mike Frysinger 2ce1efc9e3 serial: bfin_sport_uart: pull in bfin_sport.h for SPORT defines
Now that the SPORT MMR defines have been unified, switch over to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Sonic Zhang 9356c46170 serial: bfin_sport_uart: only enable SPORT TX if data is to be sent
Rather than always turn on the SPORT TX interrupt, only do it when we've
actually queued up data for transmission.  This avoids useless interrupt
processing.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Mike Frysinger 60bd940f14 serial: bfin_sport_uart: drop useless status masks
These were all copied over from the Blackfin UART driver, but they don't
make sense here because these bits are all specific to the Blackfin UART.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Sonic Zhang f4d10ca895 serial: bfin_sport_uart: zero sport_uart_port if allocated dynamically
Need to initialize the SPORT state rather than using random memory.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:28 -07:00
Sonic Zhang 9498dc95ca serial: bfin_sport_uart: protect changes to uart_port
Common serial API says we need to grab the port lock before modifying
the port state to prevent inconsistent state between threads.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang 1f7d1c85df serial: bfin_sport_uart: add support for CTS/RTS via GPIOs
Some people need flow control on their ports, so now boards can support
that via any GPIOs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang b59588aae8 serial: bfin_sport_uart: rename early platform driver class string
Clarifies command line set up for devices between consoles and early
devices.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang e8126b32f6 serial: bfin_sport_uart: add missing mapbase initialization
The driver doesn't care about this, but the common serial core wants it.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang 00c1ff8c0f serial: bfin_sport_uart: remove unused peripheral pin lists
All the resources are in the boards files now.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang 3f3a978b9f serial: bfin_sport_uart: shorten the SPORT TX waiting loop
The waiting loop to stop SPORT TX from TX interrupt is too long.  This may
block the SPORT RX interrupts and cause the RX FIFO to overflow. So, do
stop sport TX only after the last char in TX FIFO is moved into the shift
register.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Sonic Zhang a5a420d207 serial: bfin_sport_uart: work around anomaly 05000473 (make 32bit fifo read atomic)
We cannot let a 32-bit RX FIFO read be interrupted otherwise a fake RX
underflow error might be generated.

URL: http://blackfin.uclinux.org/gf/tracker/5145

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:34:27 -07:00
Jason Wessel 9731191f75 kgdboc: Add ekgdboc for early use of the kernel debugger
The ekgdboc= differs from kgdboc= in that you can begin debuggin as
soon as the exceptions are setup and the kgdb I/O driver is available,
instead of waiting until the tty subsystem is available.

CC: kgdb-bugreport@lists.sourceforge.net
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:30 -05:00
Jason Wessel efe2f29e32 kgdboc,kdb: Allow kdb to work on a non open console port
If kdb is open on a serial port that is not actually a console make
sure to call the poll routines to emit and receive characters.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20 21:04:26 -05:00
Jason Wessel ada64e4c98 kgdboc,keyboard: Keyboard driver for kdb with kgdb
This patch adds in the kdb PS/2 keyboard driver.  This was mostly a
direct port from the original kdb where I cleaned up the code against
checkpatch.pl and added the glue to stitch it into kgdb.

This patch also enables early kdb debug via kgdbwait and the keyboard.

All the access to configure kdb using either a serial console or the
keyboard is done via kgdboc.

If you want to use only the keyboard and want to break in early you
would add to your kernel command arguments:

    kgdboc=kbd kgdbwait

If you wanted serial and or the keyboard access you could use:

    kgdboc=kbd,ttyS0

You can also configure kgdboc as a kernel module or at run time with
the sysfs where you can activate and deactivate kgdb.

Turn it on:
    echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc

Turn it off:
    echo "" > /sys/module/kgdboc/parameters/kgdboc

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-05-20 21:04:24 -05:00
Jason Wessel 6d45a1aed3 sparc,sunzilog: Add console polling support for sunzilog serial driver
Allow kgdboc to work on sparc hardware with the Zilog serial chips.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: David S. Miller <davem@davemloft.net>
2010-05-20 21:04:23 -05:00
Jason Wessel 3f255eb37e sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code
The sci_poll_get_char() needs to return immediately if there is no
input from the chip to process, and must return a value of
NO_POLL_CHAR.

This allows kgdboc to process multiple polled devices while kgdb is
active.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20 21:04:23 -05:00
Jason Wessel f5316b4aea kgdb,8250,pl011: Return immediately from console poll
The design of the kdb shell requires that every device that can
provide input to kdb have a polling routine that exits immediately if
there is no character available.  This is required in order to get the
page scrolling mechanism working.

Changing the kernel debugger I/O API to require all polling character
routines to exit immediately if there is no data allows the kernel
debugger to process multiple input channels.

NO_POLL_CHAR will be the return code to the polling routine when ever
there is no character available.

CC: linux-serial@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20 21:04:22 -05:00
Linus Torvalds 5429126351 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits)
  pcmcia: disable PCMCIA ioctl also for ARM
  drivers/staging/comedi: dev_node removal (quatech_daqp_cs)
  drivers/staging/comedi: dev_node removal (ni_mio_cs)
  drivers/staging/comedi: dev_node removal (ni_labpc_cs)
  drivers/staging/comedi: dev_node removal (ni_daq_dio24)
  drivers/staging/comedi: dev_node removal (ni_daq_700)
  drivers/staging/comedi: dev_node removal (das08_cs)
  drivers/staging/comedi: dev_node removal (cb_das16_cs)
  pata_pcmcia: get rid of extra indirection
  pcmcia: remove suspend-related comment from yenta_socket.c
  pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held
  pcmcia: remove pcmcia_add_device_lock
  pcmcia: update gfp/slab.h includes
  pcmcia: remove unused mem_op.h
  pcmcia: do not autoadd root PCI bus resources
  pcmcia: clarify alloc_io_space, move it to resource handlers
  pcmcia: move all pcmcia_resource_ops providers into one module
  pcmcia: move high level CIS access code to separate file
  pcmcia: dev_node removal (core)
  pcmcia: dev_node removal (remaining drivers)
  ...
2010-05-20 09:09:46 -07:00
Linus Torvalds 349e1fba7e Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits)
  Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry
  Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support
  Input: s3c24xx_ts - Implement generic GPIO configuration callback
  ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration
  ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen
  ARM: S3C64XX: Add touchscreen platform device definition
  ARM: SAMSUNG: Move mach/ts.h to plat/ts.h
  ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: gpio.h cleanup
  ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100
  ARM: S5PC100: Use common functions for gpiolib implementation
  drivers: serial: S5PC100 serial driver cleanup
  ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move
  ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories
  ARM: SAMSUNG: move driver strength gpio configuration helper to common dir
  ARM: S5PV210: Add GPIOlib support
  ARM: SAMSUNGy: fix broken timer irq base
  ARM: SMDK6440: Add audio devices on board
  ARM: S5P6440: Add audio platform devices
  ...
2010-05-19 11:49:33 -07:00
Linus Torvalds 1d3c6ff44a Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits)
  ARM: remove 'select GENERIC_TIME'
  ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO
  ARM: 6074/1: oprofile: convert from sysdev to platform device
  ARM: 6073/1: oprofile: remove old files and update KConfig
  ARM: 6072/1: oprofile: use perf-events framework as backend
  ARM: 6071/1: perf-events: allow modules to query the number of hardware counters
  ARM: 6070/1: perf-events: add support for xscale PMUs
  ARM: 6069/1: perf-events: use numeric ID to identify PMU
  ARM: 6064/1: pmu: register IRQs at runtime
  ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA
  ARM: 6134/1: Handle instruction cache maintenance fault properly
  ARM: nwfpe: allow debugging output to be configured at runtime
  ARM: rename mach_cpu_disable() to platform_cpu_disable()
  ARM: 6132/1: PL330: Add common core driver
  ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310
  ARM: Move memory mapping into mmu.c
  ARM: Ensure meminfo is sorted prior to sanity_check_meminfo
  ARM: Remove useless linux/bootmem.h includes
  ARM: convert /proc/cpu/aligment to seq_file
  arm: use asm-generic/scatterlist.h
  ...
2010-05-19 11:37:22 -07:00