Commit Graph

18 Commits

Author SHA1 Message Date
Ido Schimmel c39d0454ec net: Add support for CHANGEUPPER notifier error injection
Since CHANGEUPPER can now fail, add support for it in the newly
introduced netdev notifier error injection infrastructure.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:23 -05:00
Nikolay Aleksandrov 02fff96a79 net: add support for netdev notifier error injection
This module allows to insert errors in some of netdevice's notifier
events. All network drivers use these notifiers to signal various events
and to check if they are allowed, e.g. PRECHANGEMTU and CHANGEMTU
afterwards. Until recently I had to run failure tests by injecting
a custom module, but now this infrastructure makes it trivial to test
these failure paths. Some of the recent bugs I fixed were found using
this module.
Here's an example:
 $ cd /sys/kernel/debug/notifier-error-inject/netdev
 $ echo -22 > actions/NETDEV_CHANGEMTU/error
 $ ip link set eth0 mtu 1024
 RTNETLINK answers: Invalid argument

CC: Akinobu Mita <akinobu.mita@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev <netdev@vger.kernel.org>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:31:57 -05:00
Davidlohr Bueso ab51fbab39 futex: Fault/error injection capabilities
Although futexes are well known for being a royal pita,
we really have very little debugging capabilities - except
for relying on tglx's eye half the time.

By simply making use of the existing fault-injection machinery,
we can improve this situation, allowing generating artificial
uaddress faults and deadlock scenarios. Of course, when this is
disabled in production systems, the overhead for failure checks
is practically zero -- so this is very cheap at the same time.
Future work would be nice to now enhance trinity to make use of
this.

There is a special tunable 'ignore-private', which can filter
out private futexes. Given the tsk->make_it_fail filter and
this option, pi futexes can be narrowed down pretty closely.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: http://lkml.kernel.org/r/1435645562-975-3-git-send-email-dave@stgolabs.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-20 11:45:45 +02:00
Masanari Iida 4e79162a52 doc: fix quite a few typos within Documentation
Correct spelling typo in Documentations

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:28:24 +01:00
Akinobu Mita c24aa64d16 fault-injection: add tool to run command with failslab or fail_page_alloc
This adds tools/testing/fault-injection/failcmd.sh to run a command while
injecting slab/page allocation failures via fault injection.

Example:

Run a command "make -C tools/testing/selftests/ run_tests" with
injecting slab allocation failure.

	# ./tools/testing/fault-injection/failcmd.sh \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to specify 100 times failures at most instead of
one time at most by default.

	# ./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Same as above except to inject page allocation failure instead of slab
allocation failure.

	# env FAILCMD_TYPE=fail_page_alloc \
		./tools/testing/fault-injection/failcmd.sh --times=100 \
		-- make -C tools/testing/selftests/ run_tests

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Akinobu Mita 8d43828814 fault-injection: notifier error injection
This patchset provides kernel modules that can be used to test the error
handling of notifier call chain failures by injecting artifical errors to
the following notifier chain callbacks.

 * CPU notifier
 * PM notifier
 * memory hotplug notifier
 * powerpc pSeries reconfig notifier

Example: Inject CPU offline error (-1 == -EPERM)

  # cd /sys/kernel/debug/notifier-error-inject/cpu
  # echo -1 > actions/CPU_DOWN_PREPARE/error
  # echo 0 > /sys/devices/system/cpu/cpu1/online
  bash: echo: write error: Operation not permitted

The patchset also adds cpu and memory hotplug tests to
tools/testing/selftests These tests first do simple online and offline
test and then do fault injection tests if notifier error injection
module is available.

This patch:

The notifier error injection provides the ability to inject artifical
errors to specified notifier chain callbacks.  It is useful to test the
error handling of notifier call chain failures.

This adds common basic functions to define which type of events can be
fail and to initialize the debugfs interface to control what error code
should be returned and which event should be failed.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:22 -07:00
Per Forlin 199e3f4b41 fault-injection: update documentation with the mmc module param
Signed-off-by: Per Forlin <per.forlin@linaro.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:13 -04:00
Per Forlin 1e4cb22bb5 fault-inject: add documentation on MMC IO fault injection
Add description on how to enable random fault injection
for MMC IO.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 15:43:34 -04:00
Akinobu Mita dd48c085c1 fault-injection: add ability to export fault_attr in arbitrary directory
init_fault_attr_dentries() is used to export fault_attr via debugfs.
But it can only export it in debugfs root directory.

Per Forlin is working on mmc_fail_request which adds support to inject
data errors after a completed host transfer in MMC subsystem.

The fault_attr for mmc_fail_request should be defined per mmc host and
export it in debugfs directory per mmc host like
/sys/kernel/debug/mmc0/mmc_fail_request.

init_fault_attr_dentries() doesn't help for mmc_fail_request.  So this
introduces fault_create_debugfs_attr() which is able to create a
directory in the arbitrary directory and replace
init_fault_attr_dentries().

[akpm@linux-foundation.org: extraneous semicolon, per Randy]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Per Forlin <per.forlin@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03 14:25:20 -10:00
Simon Kagstrom 0347af4ee3 lkdtm: add debugfs access and loosen KPROBE ties
Add adds a debugfs interface and additional failure modes to LKDTM to
provide similar functionality to the provoke-crash driver submitted here:

  http://lwn.net/Articles/371208/

Crashes can now be induced either through module parameters (as before)
or through the debugfs interface as in provoke-crash.

The patch also provides a new "direct" interface, where KPROBES are not
used, i.e., the crash is invoked directly upon write to the debugfs
file. When built without KPROBES configured, only this mode is available.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Cc: M. Mohan Kumar <mohan@in.ibm.com>
Cc: Americo Wang <xiyou.wangcong@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:32 -08:00
Anton Blanchard a225a5cc2c fault injection: correct function names in documentation
init_fault_attr_entries() should be init_fault_attr_dentries().

cleanup_fault_attr_entries() should be cleanup_fault_attr_dentries().

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:22 -08:00
GeunSik Lim 156f5a7801 debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem.
Many developers use "/debug/" or "/debugfs/" or "/sys/kernel/debug/"
directory name to mount debugfs filesystem for ftrace according to
./Documentation/tracers/ftrace.txt file.

And, three directory names(ex:/debug/, /debugfs/, /sys/kernel/debug/) is
existed in kernel source like ftrace, DRM, Wireless, Documentation,
Network[sky2]files to mount debugfs filesystem.

debugfs means debug filesystem for debugging easy to use by greg kroah
hartman. "/sys/kernel/debug/" name is suitable as directory name
of debugfs filesystem.
- debugfs related reference: http://lwn.net/Articles/334546/

Fix inconsistency of directory name to mount debugfs filesystem.

* From Steven Rostedt
  - find_debugfs() and tracing_files() in this patch.

Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Acked-by     : Inaky Perez-Gonzalez <inaky@linux.intel.com>
Reviewed-by  : Steven Rostedt <rostedt@goodmis.org>
Reviewed-by  : James Smart <james.smart@emulex.com>
CC: Jiri Kosina <trivial@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: Peter Osterlund <petero2@telia.com>
CC: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
CC: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
CC: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Akinobu Mita 185848707e fault-injection: fix example scripts in documentation
Fix and cleanup example scripts in fault injection documentation.

1. Eliminate broken oops() shell function.

2. Fold failcmd.sh and failmodule.sh into example scripts. It makes
   the example scripts work independent of current working directory.

3. Set "space" parameter to 0 to start injecting errors immediately.

4. Use /sys/module/<modulename>/sections/.data as upper bound of
   .text section. Because some module doesn't have .exit.text section.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Akinobu Mita 54114994f4 fault-injection: add min-order parameter to fail_page_alloc
Limiting smaller allocation failures by fault injection helps to find real
possible bugs.  Because higher order allocations are likely to fail and
zero-order allocations are not likely to fail.

This patch adds min-order parameter to fail_page_alloc.  It specifies the
minimum page allocation order to be injected failures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Don Mullis 5d0ffa2b84 [PATCH] fault-injection: Correct, disambiguate, and reformat documentation
Correct, disambiguate, and reformat documentation.

Signed-off-by: Don Mullis <dwm@meer.net>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita 329409aeda [PATCH] fault injection: stacktrace filtering
This patch provides stacktrace filtering feature.

The stacktrace filter allows failing only for the caller you are
interested in.

For example someone may want to inject kmalloc() failures into
only e100 module. they want to inject not only direct kmalloc() call,
but also indirect allocation, too.

- e100_poll --> netif_receive_skb --> packet_rcv_spkt --> skb_clone
  --> kmem_cache_alloc

This patch enables to detect function calls like this by stacktrace
and inject failures. The script Documentaion/fault-injection/failmodule.sh
helps it.

The range of text section of loaded e100 is expected to be
[/sys/module/e100/sections/.text, /sys/module/e100/sections/.exit.text)

So failmodule.sh stores these values into /debug/failslab/address-start
and /debug/failslab/address-end. The maximum stacktrace depth is specified
by /debug/failslab/stacktrace-depth.

Please see the example that demonstrates how to inject slab allocation
failures only for a specific module
in Documentation/fault-injection/fault-injection.txt

[dwm@meer.net: reject failure if any caller lies within specified range]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:03 -08:00
Akinobu Mita 8a8b6502fb [PATCH] fault-injection capability for kmalloc
This patch provides fault-injection capability for kmalloc.

Boot option:

failslab=<interval>,<probability>,<space>,<times>

	<interval> -- specifies the interval of failures.

	<probability> -- specifies how often it should fail in percent.

	<space> -- specifies the size of free space where memory can be
		   allocated safely in bytes.

	<times> -- specifies how many times failures may happen at most.

Debugfs:

/debug/failslab/interval
/debug/failslab/probability
/debug/failslab/specifies
/debug/failslab/times
/debug/failslab/ignore-gfp-highmem
/debug/failslab/ignore-gfp-wait

Example:

	failslab=10,100,0,-1

slab allocation (kmalloc(), kmem_cache_alloc(),..) fails once per 10 times.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00
Akinobu Mita de1ba09b21 [PATCH] fault injection: documentation and scripts
This patch set provides some fault-injection capabilities.

- kmalloc() failures

- alloc_pages() failures

- disk IO errors

We can see what really happens if those failures happen.

In order to enable these fault-injection capabilities:

1. Enable relevant config options (CONFIG_FAILSLAB, CONFIG_PAGE_ALLOC,
   CONFIG_MAKE_REQUEST) and if you want to configure them via debugfs,
   enable CONFIG_FAULT_INJECTION_DEBUG_FS.

2. Build and boot with this kernel

3. Configure fault-injection capabilities behavior by boot option or debugfs

   - Boot option

     failslab=
     fail_page_alloc=
     fail_make_request=

   - Debugfs

     /debug/failslab/*
     /debug/fail_page_alloc/*
     /debug/fail_make_request/*

   Please refer to the Documentation/fault-injection/fault-injection.txt
   for details.

4. See what really happens.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:02 -08:00