Commit Graph

102 Commits

Author SHA1 Message Date
Linus Torvalds 68e24ba704 Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits)
  ARM: pxa/cm-x300: properly set bt_reset pin
  ARM: mmp: rename SHEEVAD to GPLUGD
  ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
  ARM: i.MX28: shift frac value in _CLK_SET_RATE
  plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
  ARM: mx5: fix clock usage for suspend
  ARM: pxa: use correct __iomem annotations
  ARM: pxa: sharpsl pm needs SPI
  ARM: pxa: centro and treo680 need palm27x
  ARM: pxa: make pxafb_smart_*() empty when not enabled
  ARM: pxa: select POWER_SUPPLY on raumfeld
  ARM: pxa: pxa95x is incompatible with earlier pxa
  ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
  ARM: pxa: pxa95x/saarb depends on pxa3xx code
  ARM: pxa: allow selecting just one of TREO680/CENTRO
  ARM: pxa: export symbols from pxa3xx-ulpi
  ARM: pxa: make zylonite_pxa*_init declaration match code
  ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available
  ARM: at91: add defconfig for at91sam9g45 family
  ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig
  ...
2011-11-01 19:55:06 -07:00
Eric Miao c9d1917c63 ARM: pxa: make pxafb_smart_*() empty when not enabled
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-08 21:03:04 +08:00
Yong Zhang f8798ccbef video: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-03 15:52:22 +00:00
Marek Vasut a6d710fefd ARM: pxafb: Fix access to nonexistent member of pxafb_info
In case CONFIG_FB_PXA_OVERLAY is not defined, the pxafb_freq_transition()
function tests nonexistent member of pxafb_info (since the member is not
part of the structure).

Fix this by wraping the test in ifdef, even if I don't really like how the code
looks now. The check doesn't have to happen if overlays are disabled at all as
the check is always true then.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-04-12 23:07:42 +08:00
Vasily Khoruzhick 27be9a9e37 ARM: pxafb: don't disable controller on cpufreq transition if overlay in use
It's not safe to disable controller if overlay(s) is enabled (results in
system hang). So we avoid to disable controller in this case. Userspace
should choose proper governor to avoid freq changing when overlay is in
use, otherwise LCD may blink.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16 17:44:58 +08:00
Vasily Khoruzhick dcf8eee94f ARM: pxafb: fix typo in ypos assignment
Sascha Hauer <s.hauer@pengutronix.de> pointed that
ypos takes value of xpos due to typo.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16 17:44:35 +08:00
Vasily Khoruzhick 7779cee3f4 ARM: pxafb: fix plane Z-ordering problem
pxafb_overlay_init is not right place to change Z-ordering,
move it to main plane initialization.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16 17:37:27 +08:00
Vasily Khoruzhick 1b98d7c449 ARM: pxafb: rework pxafb overlay memory management
PXAFB overlay memory management is something messy:
- it allocates memory dynamically on open/release, and it results
  in memory allocation failure after ~1h of uptime (system does not have
  115k of physically contiguous memory)
- in release callback it tries to free memory even if it was not
  allocated.

Also driver touches FDADR1 on main plane reconfiguration, and it can cause
problems if overlay1 is enabled.

This patch attempts to fix those issues.

Patch is based on Russell King's work.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-16 17:37:03 +08:00
Eric Miao da2c3f0ead [ARM] pxafb: fix building issue of incorrect reference
Commit "d2a34c1 drivers/video: Move dereference after NULL test" introduced
a build error of "fbi->dev->platform_data->smart_update" being unknown type
to the compiler, fix this by removing the unnecessary test of 'fbi'.

Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29 14:11:27 +08:00
Julia Lawall d2a34c13e7 drivers/video: Move dereference after NULL test
If the NULL test on fbi is needed, then the dereference should be after the
NULL test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 07:20:01 -08:00
Alexey Dobriyan 471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Pieter Grimmerink 049ad833b1 pxafb: add transparency field to pxafb_mode_info struct
This allows to select either RGB565 (transparency 0) or RGBT555
(transparency 1) from the mode info

Signed-off-by: Pieter Grimmerink <p.grimmerink@inepro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:30 +08:00
Sven Neumann 448ac47976 pxafb: use passed fb_var_screeninfo struct in pxafb_pan_display()
pxafb_pan_display() used to ignore the fb_var_screeninfo parameter. Now
pass it to setup_base_frame() instead of pulling default values out of
fb_info.

And the original patch has an issue of pxafb_pan_display() paying only
attention to the 'var' parameter passed in, and Ville Syrjälä pointed
out, this is potentially dangerous as user could pass in any other
screeninfo parameters as well, and not only such that are relevant for
display panning. This is fixed by limiting the arguments actually used
to .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP.

Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:29 +08:00
Daniel Mack 52a7a1cec8 [ARM] pxafb: add accelerator ID for PXA3xx GCU
Add ID 99 for PXA3xx frame buffers and report it in the pxa frame buffer
conditionally, depending on a new flag in struct pxafb_mach_info.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Dennis Oliver Kropp <dok@directfb.org>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-12 00:16:27 +08:00
Mike Rapoport 4f3edfe386 [ARM] pxa: update pxafb.c to use 'struct dev_pm_ops'
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 19:15:37 +08:00
Daniel Mack 53eff4175f [ARM] pxafb: use resource_size() function
Cleanup only, no function change.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:29 +08:00
Krzysztof Helt 537a1bf059 fbdev: add mutex for fb_mmap locking
Add a mutex to avoid a circular locking problem between the mm layer
semaphore and fbdev ioctl mutex through the fb_mmap() call.

Also, add mutex to all places where smem_start and smem_len fields change
so the mutex inside the fb_mmap() is actually used.  Changing of these
fields before calling the framebuffer_register() are not mutexed.

This is 2.6.31 material.  It removes one lockdep (fb_mmap() and
register_framebuffer()) but there is still another one (fb_release() and
register_framebuffer()).  It also cleans up handling of the smem_start and
smem_len fields used by mutexed section of the fb_mmap().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:00 -07:00
Denis V. Lunev ff14ed5db6 pxafb: lcsr1 is unused without CONFIG_FB_PXA_OVERLAY
Fixes the warning:

  drivers/video/pxafb.c: In function 'pxafb_handle_irq':
  drivers/video/pxafb.c:1442: warning: unused variable 'lcsr1'

[akpm@linux-foundation.org: save an ifdef]
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
root 9a38e989b8 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-03-24 22:04:25 +00:00
Eric Miao fa12868e59 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git into devel 2009-03-23 09:55:14 +08:00
Eric Miao 782385ae17 [ARM] pxa: fix overlay being un-necessarily initialized on pxa25x
pxa25x doesn't support overlay in its LCD controller, this patch adds
pxafb_overlay_supported() functions to check the initialization is
necessary.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-19 16:20:39 +08:00
Russell King 97fb44eb6b Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel
Conflicts:

	arch/arm/mach-at91/gpio.c
2009-03-13 21:44:51 +00:00
Eric Miao 5742964e91 [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
pxa-regs.h and hardware.h are not intended for use directly in driver
code, remove those unnecessary references.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09 21:22:38 +08:00
Russell King bdf602bd73 [ARM] fix lots of ARM __devexit sillyness
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-03 21:04:04 +00:00
Russell King 47992cbdae Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2008-12-29 18:08:11 +00:00
Eric Miao 198fc108ee [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
PXA27x and later processors support overlay1 and overlay2 on-top of the
base framebuffer (although under-neath the base is also possible). They
support palette and no-palette RGB formats, as well as YUV formats (only
available on overlay2). These overlays have dedicated DMA channels and
behave in a similar way as a framebuffer.

This heavily simplified and re-structured work is based on the original
pxafb_overlay.c (which is pending for mainline merge for a long time).

The major problems with this pxafb_overlay.c are (if you are interested
in the history):

  1. heavily redundant (the control logics for overlay1 and overlay2 are
     actually identical except for some small operations,  which are now
     abstracted into a 'pxafb_layer_ops' structure)

  2. a lot of useless and un-tested code (two workarounds which are now
     fixed on mature silicons)

  3. cursorfb is actually useless, hardware cursor should not be used
     this way, and the code was actually un-tested for a long time.

The code in this patch should be self-explanatory, I tried to add minimum
comments. As said, this is basically simplified, there are several things
still on the pending list:

  1. palette mode is un-supported and un-tested (although re-using the
     palette code of the base framebuffer is actually very easy now with
     previous clean-up patches)

  2. fb_pan_display for overlay(s) is un-supported

  3. the base framebuffer can actually be abstracted by 'pxafb_layer' as
     well, which will help further re-use of the code and keep a better
     and consistent structure. (This is the reason I named it 'pxafb_layer'
     instead of 'pxafb_overlay' or something alike)

See Documentation/fb/pxafb.txt for additional usage information.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 18:00:04 +08:00
Eric Miao 3f16ff608a [ARM] pxafb: cleanup of the timing checking code
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao 878f578319 [ARM] pxafb: cleanup of the color format manipulation code
1. introduce var_to_depth() to calculate the color depth including the
   transparency bit

2. the conversion from 'fb_var_screeninfo' to LCCR3 BPP bits can be re-
   used by overlays (in OVLxC1), thus an individual pxafb_var_to_bpp()
   has been separated out.

3. pxafb_setmode() should really set the color bitfields correctly at
   begining, introduce a pxafb_set_pixfmt() for this

4. allow user apps to specify color formats within fb_var_screeninfo,
   and checking of this in pxafb_check_var() has been simplified as
   below:

   a) pxafb_var_to_bpp() should pass - which means a basically correct
      bits_per_pixel and color depth setting
   b) the RGBT bitfields are then forced into supported values by
      pxafb_set_pixfmt()

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao a0427509a7 [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
Add the palette format support for LCCR4_PAL_FOR_3, and fix the
issue of LCCR4 being never assigned.

Also remove the useless pxafb_set_truecolor().

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao 6e354846e8 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
dma branching is enabled by extending the current setup_frame_dma()
function to allow a 2nd set of frame/palette dma descriptors to be
used.

As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[]
and pxafb_info.fdadr[] are doubled.

This allows maximum re-use of the current dma setup code, although
the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:17 +08:00
Eric Miao 7e4b19c95c [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
Note the var->yres_virtual is only re-calculated from the fix.smem_len
when text mode acceleration is enabled (which is default), this is due
to the issue as Russell suggested below:

Previous experience of doing this with the X server and acornfb is that
it causes all sorts of problems - it seems to force the X server into
assuming that the framebuffer should be panned no matter what settings
you ask it for.

The recommended workaround (implemented in acornfb) is to only do these
kinds of adjustments if text mode acceleration is enabled.  IIRC, the X
server should be disabling text mode acceleration when it maps the
framebuffer.  I seem to remember that there are X servers which forget
to do that though.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:16 +08:00
Eric Miao 77e196752b [ARM] pxafb: allow video memory size to be configurable
The amount of video memory size is decided according to the following
order:

1. <xres> x <yres> x <bits_per_pixel> by default, which is the backward
   compatible way

2. size specified in platform data

3. size specified in module parameter 'options' string or specified in
   kernel boot command line (see updated Documentation/fb/pxafb.txt)

And now since the memory is allocated from system memory, the pxafb_mmap
can be removed and the default fb_mmap() should be working all right.

Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA
descriptors and palettes, the allocation can be separated cleanly.

NOTE: the LCD DMA actually supports chained transfer (i.e. page-based
transfers), to simplify the logic and keep the performance (with less
TLB misses when accessing from memory mapped user space), the memory
is allocated by alloc_pages_*() to ensures it's physical contiguous.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29 17:59:16 +08:00
Russell King 40321fd21c Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Conflicts:

	arch/arm/mach-pxa/am200epd.c
	arch/arm/mach-pxa/ezx.c
2008-12-23 18:06:37 +00:00
Eric Miao 07f651c72a [ARM] pxafb: avoid the racing condition in pxafb_smart_thread
fbi->state change shall really be protected by fbi->ctrlr_lock, where
the change is sheltered. There is a possibility that pxafb_smart_thread
will start update the LCD panel when fbi->state == C_ENABLE, while
all other initialization isn't done.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:51:04 +08:00
Eric Miao 69bdea7047 [ARM] pxafb: allow insertion of delay to the smart panel command sequence
Some smart panel requires a delay between command sequences, while PXA
LCD controller didn't provide such one, let's emulate this by software.

A software delay marker can be inserted into the command sequence, once
pxafb_smart_queue() detects this, it flushes the previous commands and
delay for a specified number of milliseconds.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:50:52 +08:00
Eric Miao c1f99c215c [ARM] pxafb: allow better platform configurable smart panel timing
For smart panels (LCD panel with internal framebuffer), the following
LCCR3 register bits have different meanings than the parallel one:

  LCCR3_PCP - controls the L_PCLK_WR polarity
  LCCR3_HSP - controls the L_LCLK_A0 polarity
  LCCR3_VSP - controls the L_FCLK_RD polarity

To keep minimum change to the original parallel timing, the .lcd_conn
flags and 'pxafb_mode_info.sync' are re-used to reflect this:

  LCD_PCLK_EDGE_{RISE,FALL} - configures LCCR3_PCP
  sync & FB_SYNC_{HOR,VERT}_HIGH_ACT - configures LCCR3_{HSP,VSP}

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:50:40 +08:00
Eric Miao 07df1c4fea [ARM] pxafb: small cleanup of the smart panel code
Group smart panel related code in a more compact fasion, avoid abused
usage of #ifdef .. #endif.

Also fix the incorrect condition in pxafb_smart_init() to decide if it
is a smart panel or not. (should be '&' instead of '|')

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:50:30 +08:00
Eric Miao 09e647d30d [ARM] pxafb: remove now unused pxafb_setup_gpio() and related stuffs
platform should now initialize the pin usage for the LCD controller
to correctly work.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17 22:50:12 +08:00
Russell King c5b84b3bb0 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
Conflicts:

	arch/arm/mach-pxa/pxa25x.c
2008-12-02 22:07:40 +00:00
Eric Miao a5718a14a1 [ARM] pxafb: make {backlight,lcd}_power() members of struct pxafb_info
instead of holding them as static pointers.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02 14:43:47 +08:00
Russell King e0d8b13ae1 [ARM] pxa: don't pass a consumer clock name for devices with unique clocks
Where devices only have one consumer, passing a consumer clock ID
has no real benefit.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:23 +00:00
Eric Miao 6cc4abe43e pxafb: only initialize the smart panel thread when dealing with a smartpanel
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-11 21:47:51 +08:00
Eric Miao 1ec26db1f8 pxafb: introduce LCD_TYPE_MASK and use it.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-11 21:45:57 +08:00
Eric Miao 4f3e266462 [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
The newly introduced "lcd_conn" field for connected LCD panel type will
cause the original code to generate the warnings of incorrect lccr*.
This is unnecessary since well encoded LCD_* flags will not generate
incorrect combinition of lccr* bits. Skip the check if "lcd_conn" is
specified.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-16 16:39:16 +01:00
Eric Miao 9a1ac7e498 [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
Another fix of inconsistent shift of the LCD_BIAS_ACTIVE_* and
LCD_PCLK_EDGE_* is also included.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-16 16:39:16 +01:00
Eric Miao cb47729bda [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Alex Osborne <ato@meshy.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-16 16:39:15 +01:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Ian Molton e84e954a72 [ARM] PXA: squash warning in pxafb
Fixes a warning about using the wrong type in pxafb.c

Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-26 22:25:20 +01:00
Matthias Kaehlcke b91dbce56a pxafb: convert ctrlr_sem in a mutex
The semaphore ctrlr_sem is used as a mutex.  Convert it to the mutex API.

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:37 -07:00