Commit Graph

627 Commits

Author SHA1 Message Date
Mark Brown 14fa43f53f ASoC: Only register AC97 bus if it's not done already
ASoC supports both explicit codec drivers for AC97 devices and a simple
driver which uses the standard ALSA AC97 framework for codec support.
When used with the generic AC97 codec support that will provide the
ad hoc AC97 device for drivers like touchscreens to attach to so the
core shouldn't do so.

Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-13 13:50:22 +00:00
Lopez Cruz, Misael 272edb0049 ASoC: Update SDP3430 machine driver for snd_soc_card
This patch replaces "snd_soc_machine" structure by "snd_soc_card" in
SP3430 driver. This change is needed in SDP3430 driver to reflect
changes introduced by "ASoC: Rename snd_soc_card to snd_soc_machine" patch
(875065491f).

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-10 21:36:27 +00:00
Jarkko Nikula 397d5aeeb5 ASoC: WM8990: Fix kcontrol's private value use in put callback
Function wm899x_outpga_put_volsw_vu misuses the kcontrol's private value
by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it
as a pointer into struct soc_mixer_control after the commit
4eaa9819dc.

This is very similar fix than fix to TLV320AIC3X codec made by
Eero Nurkkala <ext-eero.nurkkala@nokia.com>. This fix is compile tested
only.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06 11:39:28 +00:00
Eero Nurkkala 4453dba54d ASoC: TLV320AIC3X: Fix kcontrol's private value use in put callback
Function snd_soc_dapm_put_volsw_aic3x misuses the kcontrol's private value
by still accessing it as bitfields even SOC_SINGLE_VALUE constructs it
as a pointer into struct soc_mixer_control after the commit
4eaa9819dc.

This was causing arbitrary register writes when touching the controls
defined with SOC_DAPM_SINGLE_AIC3X.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-06 11:39:28 +00:00
Liam Girdwood 64ca0404ee ALSA: ASoC: email - update email addresses.
This just updates my email address on some drivers I'd forgotten in a
previous patch.

Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-03 07:05:23 +01:00
Eero Nurkkala 21dff43456 OMAP: ASoC: Fix spinlock misuse in omap-pcm.c
omap_pcm_trigger is called also in interrupt context so CPU flags must
be restored when returning.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-02 12:41:25 +00:00
Misael Lopez Cruz ef390c0b6e ASoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver
This patch explicitly initializes McBSP Transmit Configuration
Control Register (XCCR) and Receive Configuration Control
Register (RCCR) to their reset values. Reset values are 26 ns
of DX delay and Transmit DMA disabled for XCCR register;
receive full cycle mode enabled and Receive DMA disabled for
RCCR register.

This patch requires a counterpart in OMAP McBSP driver before
to apply it. The required changes in McBSP were sent and approved
in linux-omap mailing list and patch is going upstream
(commit 3127f8f859 from linux-omap-2.6
tree).

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
[ jarkko.nikula@nokia.com: Commit id for counterpart patch corrected ]
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-29 13:17:45 +00:00
Mark Brown 9e70c1f099 ASoC: Fix null string usage with WM8753 DAIs
The WM8753 driver multiplexes the DAI structures it exposes to the
outside world, leaving them uninitialised until the codec probes.  Since
the DAI name is used during the registration and setup process provide a
dummy name.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-29 13:14:21 +00:00
Timur Tabi 8a9dee59a3 ASoC: fix registration of the SoC card in the Freescale MPC8610 drivers
The Freescale MPC8610 driver was defining two SOC card (snd_soc_card)
structures, partially initializing each one, but registering only one of
them with ASoC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-20 20:29:39 +00:00
Ben Nizette 591046cfc5 ASoC: atmel_pcm: Remove non-existant header
<mach/hardware.h> doesn't exist on AVR32 and therefore this driver won't
build on that arch.  AFAICT this driver doesn't actually use the content
of that header so easiest just to remove it.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-16 16:39:13 +00:00
Peter Ujfalusi eff317d083 ASoC: Fix the power update function for snd_soc_dapm_value_mux
Modify the check for the mux type to also handle the
snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-15 16:20:27 +01:00
Takashi Iwai 9229f43f48 Merge branch 'topic/asoc' into for-linus 2009-01-12 14:05:50 +01:00
Peter Ujfalusi c6d1662b22 ASoC: TWL4030: Module unloading fix
Call the snd_soc_free_pcm and snd_soc_dapm_free when the
codec driver is unloaded.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-09 11:03:38 +00:00
Fernando Carrijo c19a28e119 remove lots of double-semicolons
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:14 -08:00
Peter Ujfalusi cb1ace04d7 ASoC: TWL4030: Change the soc_value_enum back to soc_enum
The soc_value_enum has been merged to soc_enum.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08 13:09:52 +00:00
Peter Ujfalusi 741555568f ASoC: Merge the soc_value_enum to soc_enum struct
Merge the recently introduced soc_value_enum structure to the soc_enum.
The value based enums are still handled separately from the normal enum types,
but with the merge some of the newly introduced functions can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-08 13:09:52 +00:00
Mark Brown 227b4dc643 ASoC: Fix SND_SOC_ALL_CODECS handling of dual SPI and I2C control buses
For codecs that have both SPI and I2C support we need to ensure that we
don't try to make the codec driver built in when I2C is modular since
that won't link.  Do this by creating a helper variable which uses
conditional defaults to pick up the correct value for all combinations.

We don't need to do anything special for I2C-only codecs since a
conditional select passes on the full value for a tristate.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06 14:23:10 +00:00
Mark Brown 8c0bad7fa5 ASoC: Use snd_soc_dapm_nc_pin() in at91sam9g20ek
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-06 09:52:18 +00:00
Peter Ujfalusi 2f42357722 ASoC: TWL4030: Convert the bitfield enums to VALUE_ENUM type
Convert the bitfield coded enums to the new VALUE_ENUM type.
Remove the enum check, since the VALUE_ENUM type can handle
the bitfield coding and also handles the 'holes' in the bitfield.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Peter Ujfalusi 2e72f8e371 ASoC: New enum type: value_enum
This patch introduces a new enum type.
In this enum type each enumerated items referred with a value.

This new enum type can handle enums encoded in bitfield, or any other
weird ways. twl4030 codec has several mux selection register, where the
input/output mux is coded in a bitfield. With the normal enum type this type
of mux can not be handled in a clean way.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
David Brownell 05d5e991a7 ASoC: Clocking fixes for davinci-evm.c
Let's have audio playback not sound like chipmunks, 'k? :)

ASP1 on the DM355 EVM uses a 27 MHz external audio clock, not
the slower clock used with ASP0 on the DM6446 EVM.

Also, that slower ASP0 clock on the DM6446 is 12.288 MHz,
not 22.5792 MHz ... 48 KHz sample rate (x256), not a double
speed 44.1 KHz sample rate (which could be done, but isn't
what the board init code now sets up).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:17 +00:00
Grazvydas Ignotas 7f185340da ASoC: Mark non-connected TWL4030 pins for pandora
Pandora has all TWL4030 output pins floating, it uses
external DAC for playback. Mark those outputs as not
connected using DAPM calls.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:16 +00:00
Jarkko Nikula d304c6ef6e ASoC: OMAP: Select OMAP pin multiplexing when using Nokia N810 ASoC drivers
N810 bootloader muxes I2S pins for OMAP2420 EAC block while N810 ASoC
drivers are using McBSP block so the kernel have to change configuration
runtime.

Author has not seen problems using kernel pin multiplexing on N810 but very
many times unworking audio after forgotten to enable it and spending
15 minutes each time to figure it out again...

This change makes it easier for other users as well. If problems arise, then
they are better to find and fix in OMAP pin multiplexing framework.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 17:47:16 +00:00
Takashi Iwai cad9d90ec3 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc 2009-01-05 18:31:38 +01:00
David Brownell 5cf1c00b0e ASoC: fix davinci-sffsdr buglet
Minor bugfix:  now that DaVinci kernels can support multiple
boards, board-specific ASoC components need to verify they're
running on the right board before initializing.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-05 13:09:31 +00:00
Mark Brown ac11a2b35c ASoC: Clean up kerneldoc warnings
Almost all parameters that have been misnamed in the comments.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01 12:18:17 +00:00
Stephen Ware 9bef6489d7 ASoC: Fix pxa2xx-pcm checks for invalid DMA channels
Set the invalid dma channel to -1 (and check properly for it) in
pxa2xx_pcm_hw_free().  Was assuming 0 is an invalid channel number but 0
is a valid pxa dma channel num.

Signed-off-by: stephen <stephen.ware@eqware.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-01 11:52:48 +00:00
Peter Ujfalusi 276c62225a ASoC: TWL4030: DAPM based capture implementation
This patch adds DAPM implementaion for the capture path
on twlx030.

TWL has two physical ADC and two digital microphone (stereo) connections.
The CPU interface has four microphone channels.
For simplicity the microphone channel paths are named as:
TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid
TX2 (Left/Right)

Input routing (simplified version):
There is two levels of mux settings for TWL in input path:
Analog input mux:
 ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic}
 ADCR <- {Off, Sub mic, AUXR}

Analog/Digital mux:
TX1 Analog mode:
 TX1L <- ADCL
 TX1R <- ADCR
TX1 Digital mode:
 TX1L <- Digimic0 (Left)
 TX1R <- Digimic0 (Right)

TX2 Analog mode:
 TX2L <- ADCL
 TX2R <- ADCR
TX2 Digital mode:
 TX2L <- Digimic1 (Left)
 TX2R <- Digimic1 (Right)

The patch provides the following user controls for the capture path:
Mux settings:
"TX1 Capture Route": {Analog, Digimic0}
"TX2 Capture Route": {Analog, Digimic1}
"Analog Left Capture Route":  {Off, Main Mic, Headset Mic, AUXL, Carkit Mic}
"Analog Right Capture Route": {Off, Sub Mic, AUXR}

Volume/Gain controls:
"TX1 Digital Capture Volume": Stereo gain control for TX1 path
"TX2 Digital Capture Volume": Stereo gain control for TX2 path
"Analog Capture Volume":      Stereo gain control for the analog path only

Important things for the board files:
Microphone bias:
"Mic Bias 1":       Bias for Main mic or for digimic0 (analog or digital path)
"Mic Bias 2":       Bias for Sub mic or for digimic1 (analog or digital path)
"Headset Mic Bias": Bias for Headset mic

When the routing configured correctly only the needed components will be
powered/enabled.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 13:11:59 +00:00
Peter Ujfalusi f9a3fba2ce ASoC: TWL4030: Make the enum filter generic for twl4030
Modify the enum filter to more generic that it will filter
out the enums with text "Invalid".
The enum filter also required for the capture path.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 13:11:59 +00:00
Linus Torvalds 14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
Roel Kluin 472346da9c ALSA: ASoC: fix a typo in omp-pcm.c
Fix a typo (& and &&)

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-22 18:33:26 +01:00
Jarkko Nikula c691348587 ASoC: Fix DSP formats in SSM2602 audio codec
Thanks to Troy Kisky <troy.kisky@boundarydevices.com> for noticing.

- DSP_A format has 1-bit data delay which corresponds to SSM6202 submode 2
- DSP_B has 0-bit data delay which corresponds to submode 1
- Currently driver sets them opposite so swap the submode setting

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-22 16:23:22 +00:00
Jarkko Nikula bd25867a6c ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected drivers
- OMAP McBSP DAI driver claims to support DSP_A format which has 1-bit data
  delay but configures link for 0-bit data delay which is in fact DSP_B
- Fix this by changing format from DSP_A to DSP_B
- Fix also TLV320AIC23 codec and OSK5912 machine drivers since the same
  error is populated also there

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-22 16:15:20 +00:00
Takashi Iwai a31501d104 ALSA: ASoC - Add missing __devexit annotation to wm8350.c
Added the missing __devexit annotation to wm8350_codec_remove():
  sound/soc/codecs/wm8350.c:1546: warning: 'wm8350_codec_remove' defined but not used

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-20 16:50:53 +01:00
Troy Kisky d6f833965e ALSA: ASoc: DaVinci: davinci-evm use dsp_b mode
Sense DaVinci does not support true I2S mode and
we don't have to use the hack, use dsp_b mode instead

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:39 +00:00
Troy Kisky 9e031624d5 ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_dai
Fix the meaning of SND_SOC_DAIFMT_NB_NF to match that
used in the codec.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:39 +00:00
Troy Kisky a24f4f6826 ALSA: ASoC: tlv320aic3x add dsp_a
Add SND_SOC_DAIFMT_DSP_A mode option.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:38 +00:00
Troy Kisky 07d8d9dca4 ALSA: ASoC: DaVinci: document I2S limitations
DaVinci does not support true I2S or right justified
mode so not all I2S codecs will work with it when the codec is
master. Document this limitation.

Add dsp_a, dsp_b mode options

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:38 +00:00
Troy Kisky 69ab820c86 ALSA: ASoC: DaVinci: davinci-i2s clean up
Minor, just move a block of code to make next patch clearer.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:38 +00:00
Troy Kisky 21903c1c9e ALSA: ASoC: DaVinci: davinci-i2s clean up
Just at little cleanup of davinci_i2s_set_dai_fmt

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:38 +00:00
Troy Kisky 664b4af859 ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarity
Document the current polarity choices.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:38 +00:00
Troy Kisky 1152a1959f ALSA: ASoC: DaVinci: davinvi-evm, make requests explicit
Add constants with a value of 0 to show more explicitly
what is being requested.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-20 13:05:37 +00:00
Takashi Iwai 70043058a6 Merge branch 'fix/asoc' into topic/asoc 2008-12-19 15:36:58 +01:00
Stanley Miao 19b3f31609 ALSA: Fix a Oops bug in omap soc driver.
There will be a Oops or frequent underrun messages when playing music with
omap soc driver, this is because a data region is incorretly sized, other data
region will be overwriten when writing to this data region.

Signed-off-by: Stanley Miao <stanley.miao@windriver.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-19 15:36:35 +01:00
Mark Brown 40aa4a30d0 ASoC: Add WM8350 AudioPlus codec driver
The WM8350 is an integrated audio and power management subsystem which
provides a single-chip solution for portable audio and multimedia systems.

The integrated audio CODEC provides all the necessary functions for
high-quality stereo recording and playback. Programmable on-chip
amplifiers allow for the direct connection of headphones and microphones
with a minimum of external components. A programmable low-noise bias
voltage is available to feed one or more electret microphones.
Additional audio features include programmable high-pass filter in the
ADC input path.

This driver was originally written by Liam Girdwood with further updates
from me.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18 17:21:07 +00:00
Mark Brown b8b33cb560 ASoC: Complain if we fail to create DAPM controls
This should never happen and it's helpful to identify the specific control
that failed when it does happen.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18 17:21:07 +00:00
Mark Brown 0b34a3d03e ASoC: Ease merge difficulties from new architectures
Rather than listing lots of architectures per line in Kconfig and
Makefile, causing merge conflicts all the time, have one per line
in alphabetical order.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18 17:21:01 +00:00
Alexander Beregalov 9cd28ab005 ASoC: switch davinci DPRINTK to pr_debug()
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-14 11:33:08 +00:00
Russell King 72aaf09fda Merge git://git.marvell.com/orion into devel 2008-12-13 09:12:51 +00:00
Stanley.Miao 49d92c7d5b ASoC: TWL4030: hands-free start-up sequence.
A special start-up sequence is required to reduce the pop-noise of Class D
amplifier when enable hands-free on TWL4030.

Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-11 16:12:22 +00:00