Commit Graph

24 Commits

Author SHA1 Message Date
Paul Martin b0abf36ffd MIPS: Octeon: Set appropriate endianness in L2C registers
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9629/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:22:14 +02:00
Aaro Koskinen 05f5507f59 MIPS: OCTEON: add GPIO LED support for DSR-1000N
DSR-1000N board has two GPIO LEDs next to USB ports. Add support for them.

[ralf@linux-mips.org: Resolved conflict due to the moving of the DTS files
into vendor subdirectories.]

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9624/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 17:22:10 +02:00
Andreas Herrmann c99e76c55f USB: host: Introduce flag to enable use of 64-bit dma_mask for ehci-platform
ehci-octeon driver used a 64-bit dma_mask. With removal of ehci-octeon
and usage of ehci-platform ehci dma_mask is now limited to 32 bits
(coerced in ehci_platform_probe).

Provide a flag in ehci platform data to allow use of 64 bits for
dma_mask.

Cc: David Daney <david.daney@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25 20:48:28 +08:00
Andreas Herrmann a95cfa6b86 USB: host: Remove hard-coded octeon platform information for ehci/ohci
Instead rely on device tree information for ehci and ohci.

This was suggested with
http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1401358203-60225-4-git-send-email-alex.smith%40imgtec.com

  "The device tree will *always* have correct ehci/ohci clock
  configuration, so use it.  This allows us to remove a big chunk of
  platform configuration code from octeon-platform.c."

More or less I rebased that patch on Alan's work to remove ehci-octeon
and ohci-octeon drivers.

Cc: David Daney <david.daney@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 12:29:57 -08:00
Alan Stern 2193dda5ee USB: host: Remove ehci-octeon and ohci-octeon drivers
Remove special-purpose octeon drivers and instead use ehci-platform
and ohci-platform as suggested with
http://marc.info/?l=linux-mips&m=140139694721623&w=2

[andreas.herrmann:
    fixed compile error]

Cc: David Daney <david.daney@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 09:19:28 -08:00
David Daney d617f9e9b8 MIPS: OCTEON: Supply OCTEON+ USB nodes in internal device trees.
This will be needed by the next patch to use said nodes for probing
via the device tree.

Signed-off-by: David Daney <david.daney@cavium.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6185/
2014-01-23 13:02:35 +01:00
Aaro Koskinen b2e4f1560f MIPS: cavium-octeon: fix early boot hang on EBH5600 board
The boot hangs early on EBH5600 board when octeon_fdt_pip_iface() is
trying enumerate a non-existant interface. The actual hang happens in
cvmx_helper_interface_get_mode():

	mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));

when interface == 4. We can avoid this situation by first checking that
the interface exists in the DTB.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6101/
2014-01-23 13:02:34 +01:00
Faidon Liambotis ab2bb148c5 MIPS: Octeon: Fix DT pruning bug with pip ports
During the pruning of the device tree octeon_fdt_pip_iface() is called
for each PIP interface and every port up to the port count is removed
from the device tree. However, the count was set to the return value of
cvmx_helper_interface_enumerate() which doesn't actually return the
count but just returns zero on success. This effectively removed *all*
ports from the tree.

Use cvmx_helper_ports_on_interface() instead to fix this. This
successfully restores the 3 ports of my ERLite-3 and fixes the "kernel
assigns random MAC addresses" issue.

Signed-off-by: Faidon Liambotis <paravoid@debian.org>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5587/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-19 11:04:54 +02:00
David Daney 5219343f83 MIPS: OCTEON: Set proper UART clock in internal device trees.
Following patch to use generic 8250 drivers will need proper clock
information.  So when using the internal device tree, populate the
"clock-frequency" property with the correct value.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-01 15:10:54 +02:00
Ralf Baechle 7034228792 MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-02-01 10:00:22 +01:00
David Daney 43f01da0f2 MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.
The patch needs to eliminate the definition of OCTEON_IRQ_BOOTDMA so
that the device tree code can map the interrupt, so in order to not
temporarily break things, we do a single patch to both the interrupt
registration code and the pata_octeon_cf driver.

Also rolled in is a conversion to use hrtimers and corrections to the
timing calculations.

Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David Daney <david.daney@cavium.com>
2012-12-13 18:15:24 +01:00
David Daney 368bec0d4a netdev: octeon_mgmt: Convert to use device tree.
The device tree will supply the register bank base addresses, make
register addressing relative to those.  PHY connection is now
described by the device tree.

The OCTEON_IRQ_MII{0,1} symbols are also removed as they are now
unused and interfere with the irq_domain used for device tree irq
mapping.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3941/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:53 +01:00
David Daney 2fd46f47be netdev: mdio-octeon.c: Convert to use device tree.
Get the MDIO bus controller addresses from the device tree, small
clean up in use of devm_*

Remove, now unused, platform device setup code.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3938/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:53 +01:00
David Daney f353a218de i2c: Convert i2c-octeon.c to use device tree.
There are three parts to this:

1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2.
   The interrupts are specified by the device tree and these hard
   coded irq numbers block the used of the irq lines by the irq_domain
   code.

2) Remove platform device setup code from octeon-platform.c, it is
   now unused.

3) Convert i2c-octeon.c to use device tree.  Part of this includes
   using the devm_* functions instead of the raw counterparts, thus
   simplifying error handling.  No functionality is changed.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/3939/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:53 +01:00
David Daney 7ed1815296 MIPS: Octeon: Initialize and fixup device tree.
If a compiled in device tree template is used, trim out unwanted parts
based on legacy platform probing.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-kernel@vger.kernel.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/3935/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:52 +01:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
David Daney 340fbb8b12 MIPS: Add platform device and Kconfig for Octeon USB EHCI / OHCI
Declare that OCTEON reference boards have both OHCI and EHCI.

Add platform devices for the corresponding hardware.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1676/
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:45 +01:00
David Daney 4b8bca7028 MIPS: Octeon: Use I/O clock rate for calculations.
The I2C and UARTS are clocked by the I/O clock, use its rate for these
devices.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1670/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:41 +01:00
David Daney f12990720c MIPS: Octeon: Set dma_masks for octeon_mgmt device.
This allows follow-on patches to dma mapping functions to work with
the octeon mgmt device..

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1632/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29 19:08:27 +01:00
David Daney d957705446 MIPS: Octeon: Register some devices on the I2C bus.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: linux-i2c@vger.kernel.org
To: ben-linux@fluff.org
To: khali@linux-fr.org
Cc: Rade Bozic <rade.bozic.ext@nsn.com>
Patchwork: http://patchwork.linux-mips.org/patch/845/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:05 +01:00
David Daney f41c3c1b3e MIPS: Octeon: Add I2C platform device.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: linux-i2c@vger.kernel.org
To: ben-linux@fluff.org
To: khali@linux-fr.org
Cc: Rade Bozic <rade.bozic.ext@nsn.com>
Patchwork: http://patchwork.linux-mips.org/patch/847/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27 12:53:04 +01:00
David Daney 24479d9f46 MIPS: Octeon: Add platform devices MGMT Ethernet ports.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17 01:56:59 +00:00
David Daney 0f7e64a394 MIPS: Octeon: Add platform device for MDIO buses.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17 01:56:58 +00:00
David Daney 512254ba83 MIPS: Octeon: Move some platform device registration to its own file.
There is a bunch of platform device registration in
arch/mips/cavium-octeon/setup.c.  We move it to its own file in
preparation for adding more platform devices.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17 20:07:52 +02:00