Commit Graph

53 Commits

Author SHA1 Message Date
Fabian Frederick 75fda77b25 mmc: mmc-test: use swap() in mmc_test_nonblock_transfer()
Use kernel.h macro definition.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:08 +02:00
Fabio Estevam 30a9b9e1ef mmc: card: mmc_test: Simplify a trivial if-return sequence
Simplify a trivial if-return sequence. Possibly combine with a
preceding function call.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/simple_return.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01 09:07:01 +02:00
Ulf Hansson 96541bac0b Revert "mmc: core: Convert mmc_driver to device_driver"
This reverts commit 6685ac62b2 ("mmc: core: Convert mmc_driver to
device_driver")

The reverted commit went too far in simplifing the device driver parts
for mmc.

Let's restore the old mmc_driver to enable driver core to sooner
or later to remove the ->probe(), ->remove() and ->shutdown() callbacks
from the struct device_driver.

Note that, the old ->suspend|resume() callbacks in the struct
mmc_driver don't need to be restored, since the mmc block layer has
converted to the modern system PM ops.

Fixes: 6685ac62b2 ("mmc: core: Convert mmc_driver to device_driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-04-17 11:48:01 +02:00
Johan Rudholm 83533ab283 mmc: core: always check status after reset
Always check if the card is alive after a successful reset. This allows
us to remove mmc_hw_reset_check(), leaving mmc_hw_reset() as the only
card reset interface.

Signed-off-by: Johan Rudholm <johanru@axis.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19 09:56:27 +01:00
Adrian Hunter 3ee14bf79d mmc: mmc_test: Extend "Badly aligned" tests for 8-byte alignment
The "Badly aligned" tests, test reading/writing with alignments
of 1,2 and 3.  SDHCI now has 64-bit ADMA which has 8-byte
alignment, so extend the tests to test up to 7.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10 12:40:54 +01:00
Ulf Hansson 6685ac62b2 mmc: core: Convert mmc_driver to device_driver
The struct mmc_driver adds an extra layer on top of the struct
device_driver. That would be fine, if there were a good reason, but
that's not the case.

Let's simplify code by converting to the common struct device_driver
instead and thus also removing superfluous overhead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10 12:40:33 +01:00
Jingoo Han 4be7085f74 mmc: mmc_test: replace strict_strtol() with kstrtol_from_user()
The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be used.

Also, both kstrtol() and copy_from_user() can be replaced
with kstrtol_from_user() to make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-24 23:19:05 -04:00
Ulf Hansson 7628774851 mmc: core: Handle card shutdown from mmc_bus
Considering shutdown of the card, the responsibility to initate this
sequence shall be driven from the mmc_bus.

This patch enables the mmc_bus to handle this sequence properly. A new
.shutdown callback is added in the mmc_driver struct which is used to
shutdown the blk device.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27 12:39:18 -04:00
Linus Torvalds 4b8be38cf7 MMC highlights for 3.3:
Core:
  * Support for the HS200 high-speed eMMC mode.
  * Support SDIO 3.0 Ultra High Speed cards.
  * Kill pending block requests immediately if card is removed.
  * Enable the eMMC feature for locking boot partitions read-only
    until next power on, exposed via sysfs.
 
 Drivers:
  * Runtime PM support for Intel Medfield SDIO.
  * Suspend/resume support for sdhci-spear.
  * sh-mmcif now processes requests asynchronously.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPD0P3AAoJEHNBYZ7TNxYMLBQP/1nwYE0Y1prrKsiv6PWQlcDu
 LZl6kylgkq1Nd7hEX1E+kXjv+ec5Z+7RxqmyMerRJIMsfBtowLL0r9rzAu+BsNjZ
 t7YSODLCzCp80WGMDSxhgQEOiAXMlpTzD46hXC2hOjNyTXCsGz1smUfryLPCP6v/
 QbWZi43cDN+Ok5AEw8sdNIfdJYreIAPnziO6Mttvi9iFgozpxdmSJXco+kjJKd2U
 lYEG/kcfug2eJRxmsQP9v4W1Y274tFrV9VLP4mgBabFMvKlXN3uU9tqf2S9JDPv8
 Y95OzKsyk6pwOTKKL8LLS/FVd3pUoHWkf5CwlH7QPR/NgiWV8DcC7bGCyBKdTAwZ
 14yolNVAKdLday7+DoKCk4Eac69exmBNnED9Ky37B+STiob/5qd3iLqspFBITUQU
 F9bUSyw9HkdWfD4zeUD4qj9iyc6Xgzk5HbxOyJb8Wgg3VlhVESkIBeOQ/ZLT35EC
 ihYStdu/No/p9r5XLClHAUuo55vT5ypGWFHAeJeUtt/BMKB3ZrHcqoihge2PAjkz
 pnudMf5TXD4ZUYanIT8SFfmuGisoax0Qg99+xyuYZ1c8foJ7LsMSDqEicwrxi07e
 0TT8Z37lrR+FRkusRA+nQ5Ba9/iOdVGq2DdiDUGlaYIaIWYVWNXEgjOPDzS5kfoA
 PVuJRYhR4fIeFb0aqa/p
 =LJnN
 -----END PGP SIGNATURE-----

Merge tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

MMC highlights for 3.3:

Core:
 * Support for the HS200 high-speed eMMC mode.
 * Support SDIO 3.0 Ultra High Speed cards.
 * Kill pending block requests immediately if card is removed.
 * Enable the eMMC feature for locking boot partitions read-only
   until next power on, exposed via sysfs.

Drivers:
 * Runtime PM support for Intel Medfield SDIO.
 * Suspend/resume support for sdhci-spear.
 * sh-mmcif now processes requests asynchronously.

* tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits)
  mmc: fix a deadlock between system suspend and MMC block IO
  mmc: sdhci: restore the enabled dma when do reset all
  mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation
  mmc: host: Adds support for eMMC 4.5 HS200 mode
  mmc: core: HS200 mode support for eMMC 4.5
  mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()
  mmc: core: Separate the timeout value for cache-ctrl
  mmc: sdhci-spear: Fix compilation error
  mmc: sdhci: Deal with failure case in sdhci_suspend_host
  mmc: dw_mmc: Clear the DDR mode for non-DDR
  mmc: sd: Fix SDR12 timing regression
  mmc: sdhci: Fix tuning timer incorrect setting when suspending host
  mmc: core: Add option to prevent eMMC sleep command
  mmc: omap_hsmmc: use threaded irq handler for card-detect.
  mmc: sdhci-pci: enable runtime PM for Medfield SDIO
  mmc: sdhci: Always pass clock request value zero to set_clock host op
  mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION
  mmc: sdhci-pci: get gpio numbers from platform data
  mmc: sdhci-pci: add platform data
  mmc: sdhci: prevent card detection activity for non-removable cards
  ...
2012-01-13 20:41:15 -08:00
Per Forlin 739c69c964 mmc: mmc_test: align max_seg_size
If max_seg_size is unaligned, mmc_test_map_sg() may create sg element
sizes that are not aligned with 512 byte. Fix, align max_seg_size at
mmc_test_area_init().

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Al Viro f4ae40a6a5 switch debugfs to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:56 -05:00
Girish K S a3c76eb9d4 mmc: replace printk with appropriate display macro
All the files using printk function for displaying kernel messages
in the mmc driver have been replaced with corresponding macro.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:22 -04:00
Paul Gortmaker 88b4767974 mmc: Add module.h to drivers/mmc users assuming implicit presence.
We are cleaning up the implicit presence of module.h; these guys are
some of the people who just assume it will be there.  Call it out
explitly for those that really need it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:19 -04:00
Adrian Hunter 2311344c33 mmc: mmc-test: add eMMC hardware reset test
MMC core provides a checking function that checks if the reset
has happended.  Add a test to use that function.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:07 -04:00
Jaehoon Chung 7435bb7950 mmc: core: use defined R1_STATE_PRG macro for card status
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13 14:50:31 -04:00
Andy Shevchenko d5a5bd1c3f mmc: mmc_test: avoid stalled file in debugfs
During card removal and inserting cycle the test file in the debugfs could be
stalled until the host driver removes it. Let's keep the file in the linked
list and destroy it when card is removed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-13 14:50:22 -04:00
Per Forlin bf04333036 mmc: mmc_test: test to measure how sg_len affect performance
Add a test that measures how the mmc bandwidth depends on the numbers of
sg elements in the sg list. The transfer size if fixed and sg length goes
from a few up to 512. The purpose is to measure overhead caused by
multiple sg elements.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:21:12 -04:00
Per Forlin 9f9c4180f8 mmc: mmc_test: add test for non-blocking transfers
Add four tests for read and write performance per
different transfer size, 4k to 4M.
 * Read using blocking mmc request
 * Read using non-blocking mmc request
 * Write using blocking mmc request
 * Write using non-blocking mmc request

The host driver must support pre_req() and post_req()
in order to run the non-blocking test cases.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:21:12 -04:00
Per Forlin 54f3caf5bc mmc: mmc_test: add debugfs file to list all tests
Add a debugfs file "testlist" to print all available tests.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Venkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:21:11 -04:00
Andy Shevchenko 253d6a280f mmc: mmc_test: minor clean up, use t = &test.area everywhere
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24 23:53:49 -04:00
Chris Ball 24f5b53ba0 mmc: initialize struct mmc_request at declaration time
Converts from:
	struct mmc_request mrq;
	memset(&mrq, 0, sizeof(struct mmc_request));

to:
	struct mmc_request mrq = {0};

because it's shorter, as performant, and easier to work out whether
initialization has happened.

Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24 21:02:01 -04:00
Chris Ball a61ad2b49b mmc: initialize struct mmc_data at declaration time
Converts from:
	struct mmc_data data;
	memset(&data, 0, sizeof(struct mmc_data));

to:
	struct mmc_data data = {0};

because it's shorter, as performant, and easier to work out whether
initialization has happened.

Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24 21:01:56 -04:00
Chris Ball 1278dba167 mmc: initialize struct mmc_command at declaration time
Converts from:
	struct mmc_command cmd;
	memset(&cmd, 0, sizeof(struct mmc_command));

to:
	struct mmc_command cmd = {0};

because it's shorter, as performant, and easier to work out whether
initialization has happened.

Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24 21:01:52 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Chris Ball 5a8fba524c mmc: mmc_test: Remove set-but-unused variable.
Fixes:

drivers/mmc/card/mmc_test.c: In function ‘mmc_test_seq_perf’:
drivers/mmc/card/mmc_test.c:1878:28: warning: variable ‘ts’ set but not
used [-Wunused-but-set-variable]

There's no reason to be calling timespec_sub() here, because
mmc_test_print_avg_rate() is going to do that itself.

Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
2011-03-25 10:30:49 -04:00
Adrian Hunter a803d551d9 mmc: mmc_test: add tests to measure large sequential I/O performance
Add two large sequential I/O performance tests:
        35. Large sequential read into scattered pages
        36. Large sequential write from scattered pages

The tests measure transfer times for 10MiB, 100MiB, 1000MiB.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15 13:48:44 -04:00
Adrian Hunter b6056d1234 mmc: mmc_test: add tests to measure random I/O operations per second
Existing performance tests measure single or sequential I/O speed.
Add two random I/O tests:
        33. Random read performance by transfer size
        34. Random write performance by transfer size

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15 13:48:42 -04:00
Adrian Hunter 0532ff6358 mmc: mmc_test: make performance test area size about 4MiB
The test area size was set to the preferred erase size but for comparison
purposes it is better if it is the same size for different devices.  Make
it a multiple of preferred erase size that is greater than or equal to 4MiB.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15 13:48:40 -04:00
Pawel Moll 54d6b44a5f mmc: mmc_test: Only warn about not waiting for busy if it's supported
If the MMC host controller does not support waiting for card signaling
busy state (MMC_CAP_WAIT_WHILE_BUSY cap), there is no point in prining
the relevant warning message.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-15 13:48:28 -04:00
Adrian Hunter 0f8d8ea64e mmc: Fixes for Dual Data Rate (DDR) support
The DDR support patch needs the following fixes:

- The block driver does not need to know about DDR, any more
  than it needs to know about bus width.
- Not only the card must be switched to DDR mode.  The host
  controller must also be configured, which is done through
  the 'set_ios()' function.
- Do not set the DDR mode state until after the switch command
  is successful.
- Setting block length is not supported in DDR mode.  Make that
  a core function and change the other place it is used (mmc_test)
  also.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:16 +08:00
Adrian Hunter c27d37aed0 mmc_test: fix display of .5 KiB
Append .5 to KiB display when there are an odd number of sectors.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:13 +08:00
Adrian Hunter 3d203be833 mmc_test: fix memory allocation segment limits
Correctly allocate memory to meet the host controller
driver's maximum segment size and count limits.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:13 +08:00
Andy Shevchenko 130067ed15 mmc_test: move files from sysfs to debugfs
As proposed by Greg K-H it is more logical to keep files for the mmc_test
driver under debugfs.

Additionally this patch brings seq_file API for show() method.  It allows
to write unlimited data to the file.

Example of usage:
  # mount -t debugfs none /sys/kernel/debug
  # modprobe mmc_test
    [  581.395843] mmc_test mmc0:0001: Card claimed for testing.
  # echo 25 > /sys/kernel/debug/mmc0/mmc0\:0001/test
    [  604.568542] mmc0: Starting tests of card mmc0:0001...
    [  604.582733] mmc0: Test case 25. Best-case read performance into scattered pages...
    [  604.923553] mmc0: Transfer of 8192 sectors (4096 KiB) took 0.124664314 seconds (33644 kB/s, 32856 KiB/s)
    [  604.933227] mmc0: Result: OK
    [  604.936248] mmc0: Tests completed.
  # cat /sys/kernel/debug/mmc0/mmc0\:0001/test
    Test 25: 0
    1 8192 0.124664314 33644784

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Greg KH <greg@kroah.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:13 +08:00
Andy Shevchenko 3183aa1534 mmc_test: collect data and show it via sysfs by demand
Make it possible to get test results via sysfs.  It helps to do tests
non-interactively.  We have the file created under sysfs already and
can use it to show test results.

Prior to this patch, the "test" file under each card's sysfs node was
write-only, and results were obtained by looking at dmesg.  This patch
improves programmatic access to the test results, making them available by
reading back from the same "test" file:

[root@host mmc0:e624]# echo 6 > test
[root@host mmc0:e624]# cat test
Test 6: 2

[cjb@laptop.org: changelog improvements]
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:13 +08:00
Andy Shevchenko 5c25aee536 mmc_test: change simple_strtol() to strict_strtol()
It's better to use strict_strtol() to convert user's input and strictly
check it. At least it forbids to interpret wrong input as a 0 and
prevents to run all tests.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:12 +08:00
Andy Shevchenko 63be54cefa mmc_test: use API to check card type
There are methods to check card type. Let's use them instead of direct checking
type bits.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:12 +08:00
Adrian Hunter c8c8c1bdbe mmc_test: fix performance tests that go over max_blk_count
The host controller driver limits I/O transfers to maximum
transfer size, maximum block count, maximum segment size
and maximum segment count.  The performance tests were
not obeying these limits which meant they would not work
with some drivers.  This patch fixes that.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:12 +08:00
Andy Shevchenko 265cdc900c mmc: rename dev_to_mmc_card() to mmc_dev_to_card()
Global symbols should use their subsystem name in a prefixed fashion.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:12 +08:00
Andy Shevchenko 453722b9f7 mmc: make mmc_dev_to_card() macro public
Conversion from struct device to struct mmc_card is used more than in one
place.  Due to this it's better to have public macro for such thing.

Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23 21:11:12 +08:00
Adrian Hunter fec4dcce23 mmc_test: fix large memory allocation
- Fix mmc_test_alloc_mem.

- Use nr_free_buffer_pages() instead of sysinfo.totalram to determine
  total lowmem pages.

- Change variables containing memory sizes to unsigned long.

- Limit maximum test area size to 128MiB because that is the maximum MMC
  high capacity erase size (the maxmium SD allocation unit size is just
  4MiB)

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:31 -07:00
Adrian Hunter 64f7120d89 mmc_test: add performance tests
mmc_test provides tests aimed at testing SD/MMC hosts.  This patch adds
performance tests.

It is advantageous to have performance tests in a kernel
module like mmc_test for the following reasons:
	- transfer times can be measured very accurately
	- arbitrarily large transfers are possible
	- the effect of contiguous vs scattered pages
	can be determined

The new tests are:

	23. Best-case read performance
	24. Best-case write performance
	25. Best-case read performance into scattered pages
	26. Best-case write performance from scattered pages
	27. Single read performance by transfer size
	28. Single write performance by transfer size
	29. Single trim performance by transfer size
	30. Consecutive read performance by transfer size
	31. Consecutive write performance by transfer size
	32. Consecutive trim performance by transfer size

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 08:43:30 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Johan Kristell c286d03cce mmc_test: block addressed cards
This patch fixes a bug in the multiblock write tests where the written
data is read back for verifying one block at a time.  The tests in
mmc_test assumes that all cards are byte addressable.

This will cause the multi block write tests to fail, leading the user of
the mmc_test driver thinking there is something wrong with the sdhci
driver they are testing.

The start address for the block is calculated as: blocknum * 512. For
block addressable cards the blocknum alone should be used.

Signed-off-by: Johan Kristell <johan.kristell@axis.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-11 13:59:42 -08:00
Rabin Vincent 58a5dd3e0e mmc_test: fix basic read test
Due to a typo in the Basic Read test, it's currently identical to the
Basic Write test.  Fix this.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-18 21:01:14 +01:00
Akinobu Mita a650031a6b mmc_test: initialize mmc_test_lock statically
The mutex mmc_test_lock is initialized at every time mmc_test device
is probed. Probing another mmc_test device may break the mutex, if
the probe function is called while the mutex is locked.

This patch fixes it by statically initializing mmc_test_lock.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20 13:03:50 +02:00
Pierre Ossman b7ac2cf1cd mmc_test: Revert "mmc_test: test oversized sg lists"
This reverts commit 48b5352ea1. Oversized
sg lists are not allowed anymore, and the core even checks for them in
debug mode, so this test is entirely incorrect.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01 19:03:37 +02:00
Pierre Ossman 60c9c7b1d9 mmc_test: print message when attaching to card
Make it a bit more obvious that the card has been claimed by the
mmc_test driver so that people don't have to wonder why their block
device never shows up.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23 14:42:09 +02:00
Pierre Ossman 48b5352ea1 mmc_test: test oversized sg lists
Add tests that make sure the driver properly checks the blocks and
blksz fields and doesn't assume the sg list has a size that perfectly
matches the current request.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23 14:42:08 +02:00
Pierre Ossman 2661081f5a mmc_test: highmem tests
Add a couple of tests to make sure the host driver handles highmem
memory pages properly. Unfortunately there is no way to guarantee an
allocation below 4 GB in i386, so it might give you addresses that
are out of reach for the hardware (OTOH, so will any other highmem
allocation in the kernel).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23 14:42:08 +02:00
Pierre Ossman 6b174931a7 mmc_test: cleanup
Clean up and reorganise the mmc_test driver so that it (hopefully)
is easier to extend with more complex tests.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:45 +02:00