Commit Graph

40 Commits

Author SHA1 Message Date
Eric Biggers 6a9269c838 ext4: switch to fscrypt_get_symlink()
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-11 22:10:40 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
David Howells 99652ea56a ext4: Add statx support
Return enhanced file attributes from the Ext4 filesystem.  This includes
the following:

 (1) The inode creation time (i_crtime) as stx_btime, setting STATX_BTIME.

 (2) Certain FS_xxx_FL flags are mapped to stx_attribute flags.

This requires that all ext4 inodes have a getattr call, not just some of
them, so to this end, split the ext4_getattr() function and only call part
of it where appropriate.

Example output:

	[root@andromeda ~]# touch foo
	[root@andromeda ~]# chattr +ai foo
	[root@andromeda ~]# /tmp/test-statx foo
	statx(foo) = 0
	results=fff
	  Size: 0               Blocks: 0          IO Block: 4096    regular file
	Device: 08:12           Inode: 2101950     Links: 1
	Access: (0644/-rw-r--r--)  Uid:     0   Gid:     0
	Access: 2016-02-11 17:08:29.031795451+0000
	Modify: 2016-02-11 17:08:29.031795451+0000
	Change: 2016-02-11 17:11:11.987790114+0000
	 Birth: 2016-02-11 17:08:29.031795451+0000
	Attributes: 0000000000000030 (-------- -------- -------- -------- -------- -------- -------- --ai----)

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-03 01:05:58 -04:00
Miklos Szeredi dfeef68862 vfs: remove ".readlink = generic_readlink" assignments
If .readlink == NULL implies generic_readlink().

Generated by:

to_del="\.readlink.*=.*generic_readlink"
for i in `git grep -l $to_del`; do sed -i "/$to_del"/d $i; done

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-09 16:45:04 +01:00
Linus Torvalds 97d2116708 Merge branch 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr updates from Al Viro:
 "xattr stuff from Andreas

  This completes the switch to xattr_handler ->get()/->set() from
  ->getxattr/->setxattr/->removexattr"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Remove {get,set,remove}xattr inode operations
  xattr: Stop calling {get,set,remove}xattr inode operations
  vfs: Check for the IOP_XATTR flag in listxattr
  xattr: Add __vfs_{get,set,remove}xattr helpers
  libfs: Use IOP_XATTR flag for empty directory handling
  vfs: Use IOP_XATTR flag for bad-inode handling
  vfs: Add IOP_XATTR inode operations flag
  vfs: Move xattr_resolve_name to the front of fs/xattr.c
  ecryptfs: Switch to generic xattr handlers
  sockfs: Get rid of getxattr iop
  sockfs: getxattr: Fail with -EOPNOTSUPP for invalid attribute names
  kernfs: Switch to generic xattr handlers
  hfs: Switch to generic xattr handlers
  jffs2: Remove jffs2_{get,set,remove}xattr macros
  xattr: Remove unnecessary NULL attribute name check
2016-10-10 17:11:50 -07:00
Andreas Gruenbacher fd50ecaddf vfs: Remove {get,set,remove}xattr inode operations
These inode operations are no longer used; remove them.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-07 21:48:36 -04:00
Eric Biggers cc91542ac8 ext4: do not unnecessarily null-terminate encrypted symlink data
Null-terminating the fscrypt_symlink_data on read is unnecessary because
it is not string data --- it contains binary ciphertext.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-09-30 01:44:17 -04:00
Eric Biggers ef1eb3aa50 fscrypto: make filename crypto functions return 0 on success
Several filename crypto functions: fname_decrypt(),
fscrypt_fname_disk_to_usr(), and fscrypt_fname_usr_to_disk(), returned
the output length on success or -errno on failure.  However, the output
length was redundant with the value written to 'oname->len'.  It is also
potentially error-prone to make callers have to check for '< 0' instead
of '!= 0'.

Therefore, make these functions return 0 instead of a length, and make
the callers who cared about the return value being a length use
'oname->len' instead.  For consistency also make other callers check for
a nonzero result rather than a negative result.

This change also fixes the inconsistency of fname_encrypt() actually
already returning 0 on success, not a length like the other filename
crypto functions and as documented in its function comment.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-09-15 17:25:55 -04:00
Eric Biggers dcce7a46c6 ext4: fix memory leak when symlink decryption fails
This bug was introduced in v4.8-rc1.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2016-09-15 13:13:13 -04:00
Jaegeuk Kim a7550b30ab ext4 crypto: migrate into vfs's crypto engine
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-07-10 14:01:03 -04:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Linus Torvalds 32fb378437 Merge branch 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs RCU symlink updates from Al Viro:
 "Replacement of ->follow_link/->put_link, allowing to stay in RCU mode
  even if the symlink is not an embedded one.

  No changes since the mailbomb on Jan 1"

* 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch ->get_link() to delayed_call, kill ->put_link()
  kill free_page_put_link()
  teach nfs_get_link() to work in RCU mode
  teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode
  teach shmem_get_link() to work in RCU mode
  teach page_get_link() to work in RCU mode
  replace ->follow_link() with new method that could stay in RCU mode
  don't put symlink bodies in pagecache into highmem
  namei: page_getlink() and page_follow_link_light() are the same thing
  ufs: get rid of ->setattr() for symlinks
  udf: don't duplicate page_symlink_inode_operations
  logfs: don't duplicate page_symlink_inode_operations
  switch befs long symlinks to page_symlink_operations
2016-01-11 13:13:23 -08:00
Al Viro fceef393a5 switch ->get_link() to delayed_call, kill ->put_link()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-30 13:01:03 -05:00
Al Viro 6b2553918d replace ->follow_link() with new method that could stay in RCU mode
new method: ->get_link(); replacement of ->follow_link().  The differences
are:
	* inode and dentry are passed separately
	* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
	* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.

It's a flagday change - the old method is gone, all in-tree instances
converted.  Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode.  That'll change
in the next commits.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08 22:41:54 -05:00
Al Viro 21fc61c73c don't put symlink bodies in pagecache into highmem
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.

new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases.  page_follow_link_light()
instrumented to yell about anything missed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-12-08 22:41:36 -05:00
Al Viro 5a1c7f47da ext4: fix an endianness bug in ext4_encrypted_follow_link()
applying le32_to_cpu() to 16bit value is a bad idea...
    
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-11-26 15:20:50 -05:00
Darrick J. Wong 6a797d2737 ext4: call out CRC and corruption errors with specific error codes
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17 16:16:04 -04:00
Linus Torvalds d857da7b70 A very large number of cleanups and bug fixes --- in particular for
the ext4 encryption patches, which is a new feature added in the last
 merge window.  Also fix a number of long-standing xfstest failures.
 (Quota writes failing due to ENOSPC, a race between truncate and
 writepage in data=journalled mode that was causing generic/068 to
 fail, and other corner cases.)
 
 Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
 performance eliminating locking when a buffer is modified more than
 once during a transaction (which is very common for allocation
 bitmaps, for example), in which case the state of the journalled
 buffer head doesn't need to change.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVi3PeAAoJEPL5WVaVDYGj+I0H/jRPexvyvnGfxiqs1sxIlbSk
 cwewFJSsuKsy/pGYdmHvozWZyWGGORc89NrxoNwdbG+axvHbgUWt/3+vF+rzmaek
 vX4v9QvCEo4PfpRgzbnYJFhbxGMJtwci887sq1o/UoNXikFYT2kz8rpdf0++eO5W
 /GJNRA5ZUY0L0eeloUILAMrBr7KjtkI2oXwOZt5q68jh7B3n3XdNQXyEiQS/28aK
 QYcFrqA/e2Fiuk6l5OSGBCP38mySu+x0nBTLT5LFwwrUBnoZvGtdjM6Sj/yADDDn
 uP/Zpq56aLzkFRwwItrDaF26BIf2MhIH/WUYs65CraEGxjMaiPuzAudGA/iUVL8=
 =1BdR
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A very large number of cleanups and bug fixes --- in particular for
  the ext4 encryption patches, which is a new feature added in the last
  merge window.  Also fix a number of long-standing xfstest failures.
  (Quota writes failing due to ENOSPC, a race between truncate and
  writepage in data=journalled mode that was causing generic/068 to
  fail, and other corner cases.)

  Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
  performance eliminating locking when a buffer is modified more than
  once during a transaction (which is very common for allocation
  bitmaps, for example), in which case the state of the journalled
  buffer head doesn't need to change"

[ I renamed "ext4_follow_link()" to "ext4_encrypted_follow_link()" in
  the merge resolution, to make it clear that that function is _only_
  used for encrypted symlinks.  The function doesn't actually work for
  non-encrypted symlinks at all, and they use the generic helpers
                                         - Linus ]

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
  ext4: set lazytime on remount if MS_LAZYTIME is set by mount
  ext4: only call ext4_truncate when size <= isize
  ext4: make online defrag error reporting consistent
  ext4: minor cleanup of ext4_da_reserve_space()
  ext4: don't retry file block mapping on bigalloc fs with non-extent file
  ext4: prevent ext4_quota_write() from failing due to ENOSPC
  ext4: call sync_blockdev() before invalidate_bdev() in put_super()
  jbd2: speedup jbd2_journal_dirty_metadata()
  jbd2: get rid of open coded allocation retry loop
  ext4: improve warning directory handling messages
  jbd2: fix ocfs2 corrupt when updating journal superblock fails
  ext4: mballoc: avoid 20-argument function call
  ext4: wait for existing dio workers in ext4_alloc_file_blocks()
  ext4: recalculate journal credits as inode depth changes
  jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()
  ext4: use swap() in mext_page_double_lock()
  ext4: use swap() in memswap()
  ext4: fix race between truncate and __ext4_journalled_writepage()
  ext4 crypto: fail the mount if blocksize != pagesize
  ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate
  ...
2015-06-25 14:06:55 -07:00
Theodore Ts'o c936e1ec28 ext4 crypto: use per-inode tfm structure
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page.  Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.

Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-05-31 13:34:22 -04:00
Theodore Ts'o b7236e21d5 ext4 crypto: reorganize how we store keys in the inode
This is a pretty massive patch which does a number of different things:

1) The per-inode encryption information is now stored in an allocated
   data structure, ext4_crypt_info, instead of directly in the node.
   This reduces the size usage of an in-memory inode when it is not
   using encryption.

2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
   encryption structure instead.  This remove an unnecessary memory
   allocation and free for the fname_crypto_ctx as well as allowing us
   to reuse the ctfm in a directory for multiple lookups and file
   creations.

3) We also cache the inode's policy information in the ext4_crypt_info
   structure so we don't have to continually read it out of the
   extended attributes.

4) We now keep the keyring key in the inode's encryption structure
   instead of releasing it after we are done using it to derive the
   per-inode key.  This allows us to test to see if the key has been
   revoked; if it has, we prevent the use of the derived key and free
   it.

5) When an inode is released (or when the derived key is freed), we
   will use memset_explicit() to zero out the derived key, so it's not
   left hanging around in memory.  This implies that when a user logs
   out, it is important to first revoke the key, and then unlink it,
   and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
   release any decrypted pages and dcache entries from the system
   caches.

6) All this, and we also shrink the number of lines of code by around
   100.  :-)

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-05-18 13:17:47 -04:00
Theodore Ts'o d229959072 ext4 crypto: don't allocate a page when encrypting/decrypting file names
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-05-18 13:15:47 -04:00
Al Viro 6e77137b36 don't pass nameidata to ->follow_link()
its only use is getting passed to nd_jump_link(), which can obtain
it from current->nameidata

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:20:15 -04:00
Al Viro 680baacbca new ->follow_link() and ->put_link() calling conventions
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body.  Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks.  Stored pointer
is ignored in all cases except the last one.

Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().

b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is.  In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:19:45 -04:00
Al Viro 75e7566bea ext4: switch to simple_follow_link()
for fast symlinks only, of course...

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:18:23 -04:00
Al Viro a7a67e8a08 ext4: split inode_operations for encrypted symlinks off the rest
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-10 22:18:20 -04:00
Linus Torvalds 8663da2c09 Some miscellaneous bug fixes and some final on-disk and ABI changes
for ext4 encryption which provide better security and performance.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVRsVDAAoJEPL5WVaVDYGj/UUIAI6zLGhq3I8uQLZQC22Ew2Ph
 TPj6eABDuTrB/7QpAu21Dk59N70MQpsBTES6yLWWLf/eHp0gsH7gCNY/C9185vOh
 tQjzw18hRH2IfPftOBrjDlPGbbBD8Gu9jAmpm5kKKOtBuSVbKQ4GeN6BTECkgwlg
 U5EJHJJ5Ahl4MalODFreOE5ZrVC7FWGEpc1y/MquQ0qcGSGlNd35leK5FE2bfHWZ
 M1IJfXH5RRVPUBp26uNvzEg0TtpqkigmCJUT6gOVLfSYBw+lYEbGl4lCflrJmbgt
 8EZh3Q0plsDbNhMzqSvOE4RvsOZ28oMjRNbzxkAaoz/FlatWX2hrfAoI2nqRrKg=
 =Unbp
 -----END PGP SIGNATURE-----

Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous bug fixes and some final on-disk and ABI changes
  for ext4 encryption which provide better security and performance"

* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix growing of tiny filesystems
  ext4: move check under lock scope to close a race.
  ext4: fix data corruption caused by unwritten and delayed extents
  ext4 crypto: remove duplicated encryption mode definitions
  ext4 crypto: do not select from EXT4_FS_ENCRYPTION
  ext4 crypto: add padding to filenames before encrypting
  ext4 crypto: simplify and speed up filename encryption
2015-05-03 18:23:53 -07:00
Theodore Ts'o 5de0b4d0cd ext4 crypto: simplify and speed up filename encryption
Avoid using SHA-1 when calculating the user-visible filename when the
encryption key is available, and avoid decrypting lots of filenames
when searching for a directory entry in a directory block.

Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-05-01 16:56:45 -04:00
Linus Torvalds 9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Theodore Ts'o f348c25232 ext4 crypto: add symlink encryption
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-16 01:55:00 -04:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Sheng Yong 72b8e0f9fa ext4: remove unused header files
Remove unused header files and header files which are included in
ext4.h.

Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-04-02 23:47:42 -04:00
Tao Ma 939da10844 ext4: Remove CONFIG_EXT4_FS_XATTR
Ted has sent out a RFC about removing this feature. Eric and Jan
confirmed that both RedHat and SUSE enable this feature in all their
product.  David also said that "As far as I know, it's enabled in all
Android kernels that use ext4."  So it seems OK for us.

And what's more, as inline data depends its implementation on xattr,
and to be frank, I don't run any test again inline data enabled while
xattr disabled.  So I think we should add inline data and remove this
config option in the same release.

[ The savings if you disable CONFIG_EXT4_FS_XATTR is only 27k, which
  isn't much in the grand scheme of things.  Since no one seems to be
  testing this configuration except for some automated compile farms, on
  balance we are better removing this config option, and so that it is
  effectively always enabled. -- tytso ]

Cc: David Brown <davidb@codeaurora.org>
Cc: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-12-10 16:30:43 -05:00
Dmitry Monakhov 256a453546 ext4: symlink must be handled via filesystem specific operation
generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext4_setattr.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-16 02:00:00 -04:00
Theodore Ts'o 03010a3350 ext4: Rename ext4dev to ext4
The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-10 20:02:48 -04:00
Theodore Ts'o af5bc92dde ext4: Fix whitespace checkpatch warnings/errors
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-09-08 22:25:24 -04:00
Christoph Hellwig 3dcf54515a ext4: move headers out of include/linux
Move ext4 headers out of include/linux.  This is just the trivial move,
there's some more thing that could be done later. 

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-29 18:13:32 -04:00
Arjan van de Ven 754661f143 [PATCH] mark struct inode_operations const 1
Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Mingming Cao dab291af8d [PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd
Reworked from a patch by Mingming Cao and Randy Dunlap

Signed-off-By: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:16 -07:00
Mingming Cao 617ba13b31 [PATCH] ext4: rename ext4 symbols to avoid duplication of ext3 symbols
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Dave Kleikamp ac27a0ec11 [PATCH] ext4: initial copy of files from ext3
Start of the ext4 patch series.  See Documentation/filesystems/ext4.txt for
details.

This is a simple copy of the files in fs/ext3 to fs/ext4 and
/usr/incude/linux/ext3* to /usr/include/ex4*

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00