Commit Graph

5443 Commits

Author SHA1 Message Date
Linus Torvalds 95e6ba5133 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) More jumbo frame fixes in r8169, from Heiner Kallweit.

 2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

 3) Use after free in slcan driver, from Jouni Hogander.

 4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

 7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

 8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...
2019-12-08 13:28:11 -08:00
Joe Perches cd28b11904 checkpatch: reduce is_maintained_obsolete lookup runtime
The is_maintained_obsolete function can be called twice using the same
filename.  This function spawns a process using get_maintainer.pl.
Store the status of each filename when spawned and use the stored result
to eliminate the spawning of unnecessary duplicate child processes.

Example:

old:

  $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null

  real	0m1.767s
  user	0m1.634s
  sys	0m0.141s

new:

  $ time ./scripts/checkpatch.pl hp100-Move-to-staging.patch > /dev/null

  real	0m1.184s
  user	0m1.085s
  sys	0m0.103s

Link: http://lkml.kernel.org/r/b982566a2b9b4825badce36fdfc3032bd0005151.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:13 -08:00
Joe Perches d439e6a5d7 checkpatch: improve ignoring CamelCase SI style variants like mA
Ignore all upper-case variants before and after SI units like mA, mV and
uV so uses like RANGE_mA do not emit a CAMELCASE message.

Link: http://lkml.kernel.org/r/5ce6f9131327fd2e12d7a0e20a55f588448de090.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jules Irenge <jbi.octave@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:13 -08:00
Joe Perches 2f5bd34369 scripts/get_maintainer.pl: add signatures from Fixes: <badcommit> lines in commit message
A Fixes: lines in a commit message generally indicate that a previous
commit was inadequate for whatever reason.

The signers of the previous inadequate commit should also be cc'd on
this new commit so update get_maintainer to find the old commit and add
the original signers.

Link: http://lkml.kernel.org/r/33605b9fc0e0f711236951ae84185a6218acff4f.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04 19:44:12 -08:00
Linus Torvalds 76bb8b0596 Kbuild updates for v5.5
- remove unneeded asm headers from hexagon, ia64
 
  - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
 
  - add 'helpnewconfig' target, which shows help for new CONFIG options
 
  - support 'make nsdeps' for external modules
 
  - make rebuilds faster by deleting $(wildcard $^) checks
 
  - remove compile tests for kernel-space headers
 
  - refactor modpost to simplify modversion handling
 
  - make single target builds faster
 
  - optimize and clean up scripts/kallsyms.c
 
  - refactor various Makefiles and scripts
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl3lKCUVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGu9sP/iTW/RjDxbAsu0aP8jFqzLK/xKB/
 NQn/+dD76TjEmjgew9AXszf2rJL+ixKVymGM08FV59Bbguvi8XmAB/QXK21Sjb5j
 rVl3N97TWNkvXM+QJyly23G2UtbubRSPo3g+e70BZrw3lcmrsK+sAmTOL5KtIrNX
 9BHM803JwqsMJyvBwTBBw3UFeeBqb38Qx6gmigfSihuDf6pvjoVDKskpsDno3wX7
 rdiXYxAsKQLQ/P2ym/bV/Oqe90RqRtV/2/WCpLshlwHkiM9huflv6GjgCkkbAx5H
 N3TSptlS7l/2B/XKHgA5ALjHjUlxTGBzLLoevarCd8loKcQXFlgx+vd3nM/WJlHJ
 x9UpTklDwGP9eUBsa9W980tEyUVsFGMAC8EcTdW6NN2IRtuCOSA5N2FYYt8/SDd0
 2b3PhElTJIp4pTWSYN6JZxB1R8n/YBgxLqOJ6N2U6B9CdKFUCHlwGH23QfN89km/
 WEMP85bsaab/dnyxbwelkoYYYyPgUHsC13AbpkHdrDxMbAGO+G1PwpHxC6ErF2en
 wRGrcUxWTfHRykO5aJIQtCB9b1fv73134mTzB5fTYd6GtjepGBSBCO9xb2Iy4sc9
 Y+nHVVDUrihvSOpJgqh677PcLDutOZR8fFCoc1ZMDAbBsDvrb0Qsee6oEidj98xc
 5kXp9YZh/tdh/tdo
 =zUaB
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - remove unneeded asm headers from hexagon, ia64

 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving

 - add 'helpnewconfig' target, which shows help for new CONFIG options

 - support 'make nsdeps' for external modules

 - make rebuilds faster by deleting $(wildcard $^) checks

 - remove compile tests for kernel-space headers

 - refactor modpost to simplify modversion handling

 - make single target builds faster

 - optimize and clean up scripts/kallsyms.c

 - refactor various Makefiles and scripts

* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
  MAINTAINERS: update Kbuild/Kconfig maintainer's email address
  scripts/kallsyms: remove redundant initializers
  scripts/kallsyms: put check_symbol_range() calls close together
  scripts/kallsyms: make check_symbol_range() void function
  scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
  scripts/kallsyms: move more patterns to the ignored_prefixes array
  scripts/kallsyms: skip ignored symbols very early
  scripts/kallsyms: add const qualifiers where possible
  scripts/kallsyms: make find_token() return (unsigned char *)
  scripts/kallsyms: replace prefix_underscores_count() with strspn()
  scripts/kallsyms: add sym_name() to mitigate cast ugliness
  scripts/kallsyms: remove unneeded length check for prefix matching
  scripts/kallsyms: remove redundant is_arm_mapping_symbol()
  scripts/kallsyms: set relative_base more effectively
  scripts/kallsyms: shrink table before sorting it
  scripts/kallsyms: fix definitely-lost memory leak
  scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
  kbuild: make single target builds even faster
  modpost: respect the previous export when 'exported twice' is warned
  modpost: do not set ->preloaded for symbols from Module.symvers
  ...
2019-12-02 17:35:04 -08:00
Linus Torvalds 937d6eefc7 Here's the main documentation changes for 5.5:
- Various kerneldoc script enhancements.
 
  - More RST conversions; those are slowing down as we run out of things to
    convert, but we're a ways from done still.
 
  - Dan's "maintainer profile entry" work landed at last.  Now we just need
    to get maintainers to fill in the profiles...
 
  - A reworking of the parallel build setup to work better with a variety of
    systems (and to not take over huge systems entirely in particular).
 
  - The MAINTAINERS file is now converted to RST during the build.
    Hopefully nobody ever tries to print this thing, or they will need to
    load a lot of paper.
 
  - A script and documentation making it easy for maintainers to add Link:
    tags at commit time.
 
 Also included is the removal of a bunch of spurious CR characters.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl3j5B0PHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YtBcH/jIN2cO8/0YW2rjVT+1G6ytSdFUKx5WJ/lpf
 5uBeCvuCeYhtCB6+BgnXvjykJ7jDW11/NJNjWqz/gsvD5l5FJK1rXarI/oz2Klyi
 kcPtDmBF/ki4wz9qXzEpa0vg8LXdjeys50S1vE75qCzxZoPP7YjuRbPnLrlIJukv
 JbDVi4p9kxgeHfRB4+BHOe5rFwA3mMmaxKNIX34Y+UUO2KZ0g/yUi1bAaQwQAdt+
 PsORmkVQ8Puh3K9xRIr7dYlcWBlBiPqzYdvDgTVxSjrxdK6wjYjSgVk2VjC5MBUN
 mTSTWgyfsIcD/76/s8tq7ZRl2fw+SkCSkFo79Rb/hJwDTb7Vnng=
 =LPBr
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.5a' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "Here are the main documentation changes for 5.5:

   - Various kerneldoc script enhancements.

   - More RST conversions; those are slowing down as we run out of
     things to convert, but we're a ways from done still.

   - Dan's "maintainer profile entry" work landed at last. Now we just
     need to get maintainers to fill in the profiles...

   - A reworking of the parallel build setup to work better with a
     variety of systems (and to not take over huge systems entirely in
     particular).

   - The MAINTAINERS file is now converted to RST during the build.
     Hopefully nobody ever tries to print this thing, or they will need
     to load a lot of paper.

   - A script and documentation making it easy for maintainers to add
     Link: tags at commit time.

  Also included is the removal of a bunch of spurious CR characters"

* tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits)
  docs: remove a bunch of stray CRs
  docs: fix up the maintainer profile document
  libnvdimm, MAINTAINERS: Maintainer Entry Profile
  Maintainer Handbook: Maintainer Entry Profile
  MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile
  docs, parallelism: Rearrange how jobserver reservations are made
  docs, parallelism: Do not leak blocking mode to other readers
  docs, parallelism: Fix failure path and add comment
  Documentation: Remove bootmem_debug from kernel-parameters.txt
  Documentation: security: core.rst: fix warnings
  Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning
  Documentation/translation: Use Korean for Korean translation title
  docs/memory-barriers.txt: Remove remaining references to mmiowb()
  docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread
  docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section
  Documentation/kokr: Kill all references to mmiowb()
  docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section
  docs: Add initial documentation for devfreq
  Documentation: Document how to get links with git am
  docs: Add request_irq() documentation
  ...
2019-12-02 11:51:02 -08:00
Linus Torvalds 2c97b5ae83 Devicetree updates for v5.5:
- DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect,
   Unisoc/Spreadtrum SoCs and UART
 
 - Convert a bunch of Samsung bindings to DT schema
 
 - Convert a bunch of ST stm32 bindings to DT schema
 
 - Realtek and Exynos additions to Arm Mali bindings
 
 - Fix schema errors in RiscV CPU schema
 
 - Various schema fixes from improved meta-schema checks
 
 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges
 
 - Fix a memory leak in add_changeset_property() and DT unit tests.
 
 - Several documentation improvements for schema validation
 
 - Rework build rules to improve schema validation errors
 
 - Color output for dtx_diff
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAl3djLcQHHJvYmhAa2Vy
 bmVsLm9yZwAKCRD6+121jbxhw0mbEACocS2QpgxblYJfcHbMGmNajD0/jAWa6wwY
 eWNsx/Y+F1Xuz8uOsB5U9ZF5zQPTsqaN65osMljopjsib2TjUyCDZxAizzrMaFMK
 GyzS08lIh+pLYmwCmXP3YB1BaKI0j4UN+qY129jJPLfN2PrBBB0JQT9jxFQJNiB/
 XHCWT/n5sh3d/JiqGs1kHgFIwSX1jz69pU94ZTn6Nw7xgTrNl1lOXVBMaHvNGU/C
 hLXSRY+T/L0tyf33i3pm922cXxLgtAaDnAqxuPaD26hNRWw4RhvRtXJLJ2HTsCj2
 Pclc0sg6PZamyCP2vCQ5zm7nhGwbqDTSTVt3+n26DQ0Xi2SJvfbjehR3us5E0Uxe
 /CRgbwbLQxOFq/S/xeb3pqArOzsg2Uacb+lLLmKD+XCY0htObD/isLfMUxzXpB6A
 MMQkJfkcbeH5MSps2LBo6ip1JGhateJEpcaT93MK9mgH9Lzh+b/CUdq0BnvAnIKc
 t/LL57YTI7wnhEXFr6urD8xIbo0rNDlu4keaSnDaAQdh59wAvKCxAfw+rbhXA4je
 ZOi4qA70aWSOb31LXTK2S31e50LTQiQeJ/CwZ5t7RSxzTk1hFwC4YJ05aO7+qW9V
 xL6r5httEqVyTHkcbc8eaUBPTjL6iysKPUyJ7EwC2t/dTSDsQukHXq/JPQqK+0u/
 SRSY5mq0vw==
 =L6uq
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull Devicetree updates from Rob Herring:

 - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot,
   syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar,
   Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b
   panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue,
   Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404
   interconnect, Unisoc/Spreadtrum SoCs and UART

 - Convert a bunch of Samsung bindings to DT schema

 - Convert a bunch of ST stm32 bindings to DT schema

 - Realtek and Exynos additions to Arm Mali bindings

 - Fix schema errors in RiscV CPU schema

 - Various schema fixes from improved meta-schema checks

 - Improve the handling of 'dma-ranges' and in particular fix DMA mask
   setup on PCI bridges

 - Fix a memory leak in add_changeset_property() and DT unit tests.

 - Several documentation improvements for schema validation

 - Rework build rules to improve schema validation errors

 - Color output for dtx_diff

* tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits)
  libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h
  dt-bindings: arm: Remove leftover axentia.txt
  of: unittest: fix memory leak in attach_node_and_children
  of: overlay: add_changeset_property() memory leak
  dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes
  dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems
  dt-bindings: power: Rename back power_domain.txt bindings to fix references
  dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml
  dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema
  dt-bindings: remoteproc: convert stm32-rproc to json-schema
  dt-bindings: mailbox: convert stm32-ipcc to json-schema
  dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
  dt-bindings: interrupt-controller: Convert stm32-exti to json-schema
  dt-bindings: crypto: Convert stm32 HASH bindings to json-schema
  dt-bindings: rng: Convert stm32 RNG bindings to json-schema
  dt-bindings: pwm: Convert Samsung PWM bindings to json-schema
  dt-bindings: pwm: Convert PWM bindings to json-schema
  dt-bindings: serial: Add a new compatible string for SC9863A
  dt-bindings: serial: Convert sprd-uart to json-schema
  dt-bindings: arm: Add bindings for Unisoc SC9863A
  ...
2019-12-02 11:41:35 -08:00
David S. Miller 734c7022ad Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2019-12-02

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 6 day(s) which contain
a total of 10 files changed, 60 insertions(+), 51 deletions(-).

The main changes are:

1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev.

2) Fix libbpf global variable relocation to take symbol's st_value offset
   into account, from Andrii Nakryiko.

3) Fix libbpf build on powerpc where check_abi target fails due to different
   readelf output format, from Aurelien Jarno.

4) Don't set BPF insns RO for the case when they are JITed in order to avoid
   fragmenting the direct map, from Daniel Borkmann.

5) Fix static checker warning in btf_distill_func_proto() as well as a build
   error due to empty enum when BPF is compiled out, from Alexei Starovoitov.

6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-02 10:50:29 -08:00
Colin Ian King 2d216b2318 scripts/spelling.txt: add more spellings to spelling.txt
Here are some of the more common spelling mistakes and typos that I've
found while fixing up spelling mistakes in the kernel since July 2019.

Link: http://lkml.kernel.org/r/20191112092142.97989-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01 06:29:17 -08:00
Stanislav Fomichev df786c9b94 bpf: Force .BTF section start to zero when dumping from vmlinux
While trying to figure out why fentry_fexit selftest doesn't pass for me
(old pahole, broken BTF), I found out that my latest patch can break vmlinux
.BTF generation. objcopy preserves section start when doing --only-section,
so there is a chance (depending on where pahole inserts .BTF section) to
have leading empty zeroes. Let's explicitly force section offset to zero.

Before:

$ objcopy --set-section-flags .BTF=alloc -O binary \
	--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 0000 0000 0000 0000 0000 0000 0000 0000  ................

After:

$ objcopy --change-section-address .BTF=0 \
	--set-section-flags .BTF=alloc -O binary \
	--only-section=.BTF vmlinux .btf.vmlinux.bin
$ xxd .btf.vmlinux.bin | head -n1
00000000: 9feb 0100 1800 0000 0000 0000 80e1 1c00  ................
          ^BTF magic

As part of this change, I'm also dropping '2>/dev/null' from objcopy
invocation to be able to catch possible other issues (objcopy doesn't
produce any warnings for me anymore, it did before with --dump-section).

Fixes: da5fb18225 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com
2019-11-29 10:18:57 +01:00
Stanislav Fomichev da5fb18225 bpf: Support pre-2.25-binutils objcopy for vmlinux BTF
If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set,
.BTF section of vmlinux is empty and kernel will prohibit
BPF loading and return "in-kernel BTF is malformed".

--dump-section argument to binutils' objcopy was added in version 2.25.
When using pre-2.25 binutils, BTF generation silently fails. Convert
to --only-section which is present on pre-2.25 binutils.

Documentation/process/changes.rst states that binutils 2.21+
is supported, not sure those standards apply to BPF subsystem.

v2:
* exit and print an error if gen_btf fails (John Fastabend)

v3:
* resend with Andrii's Acked-by/Tested-by tags

Fixes: 341dfcf8d7 ("btf: expose BTF info through sysfs")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com
2019-11-27 11:11:42 -08:00
Linus Torvalds 361b0d286a Device properties framework updates for 5.5-rc1
Add support for printing fwnode names using a new conversion
 specifier "%pfw" (Sakari Ailus), clean up the software node and
 efi/apple-properties code in preparation for improved software node
 reference properties handling (Dmitry Torokhov) and fix the struct
 fwnode_operations description (Heikki Krogerus).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl3dHU0SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRx1JkP/j/YkE6VsMlXqL+3kMABXfVlAIZtkZ71
 YB13wtGHdz0hewvCFJDLZuJ3+axbR5Lk60tqX+lfG6GvWMtudZ+URkZ0KIUBhDXM
 uwVniqcWvlItMGo+cU7FLW1rKkRDCQ75x4GlKD1MivCG+PZXYqkH/ESQZgi3TdwD
 0rYGzUx4nBKzS9yJ6ZnBhSOGRq9sGGHgOr20LjYlAplcOMhE6PP+SQNCfKVk8DE8
 ZolavWpmD+nsV97qWGLpJOKWJXplCv+lWX8cQICvONRSWPHq6ehQ4HONnLDtPai3
 EcyGQ3LbuVMYKOWUVRYs2X+wvgmAz461Y+Du8FO1QzYuNMYzArRx2naD1LIIUT6Q
 UE8RRkN2YyqvVmSLlAYAJPH7GCP8mRZV2gHfmS7fF16jUpTOiDHKiZFjOgvSc/lp
 31DhBpWr64NgSOSpqi/bX6fSYVv9YGPOd0J8dPNsaGZbHZxJJ2cmZ092u6Rrx6VG
 x1qO2j2c2xC6Y+pEMCBCqjDUmhFD5P6O7qVky/9kyZv9AWyBlEpni7tdu8J6DqVG
 RUB0zq5jujfBoTtBFFpVxDiQYvctTs/T9te48DQkdCli0J/bUEEyNw5nX6HKnjZM
 jyrh93Th512W0JwbPWpJXn1JJMdxkNitwlLRwnhCSSTdcLZiHzDoYdf7taSemvX5
 ZJZYhPG5T6i5
 =VcCH
 -----END PGP SIGNATURE-----

Merge tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties framework updates from Rafael Wysocki:
 "Add support for printing fwnode names using a new conversion specifier
  "%pfw" (Sakari Ailus), clean up the software node and
  efi/apple-properties code in preparation for improved software node
  reference properties handling (Dmitry Torokhov) and fix the struct
  fwnode_operations description (Heikki Krogerus)"

* tag 'devprop-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  software node: simplify property_entry_read_string_array()
  software node: unify PROPERTY_ENTRY_XXX macros
  software node: remove property_entry_read_uNN_array functions
  software node: get rid of property_set_pointer()
  software node: clean up property_copy_string_array()
  software node: mark internal macros with double underscores
  efi/apple-properties: use PROPERTY_ENTRY_U8_ARRAY_LEN
  software node: introduce PROPERTY_ENTRY_XXX_ARRAY_LEN()
  software node: remove DEV_PROP_MAX
  device property: Fix the description of struct fwnode_operations
  lib/test_printf: Add tests for %pfw printk modifier
  lib/vsprintf: Add %pfw conversion specifier for printing fwnode names
  lib/vsprintf: OF nodes are first and foremost, struct device_nodes
  lib/vsprintf: Make use of fwnode API to obtain node names and separators
  lib/vsprintf: Add a note on re-using %pf or %pF
  lib/vsprintf: Remove support for %pF and %pf in favour of %pS and %ps
  device property: Add a function to obtain a node's prefix
  device property: Add fwnode_get_name for returning the name of a node
  device property: Add functions for accessing node's parents
  device property: Move fwnode_get_parent() up
  ...
2019-11-26 19:45:12 -08:00
Linus Torvalds 386403a115 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...
2019-11-25 20:02:57 -08:00
Linus Torvalds 436b2a8039 Printk changes for 5.5
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl3bpjoACgkQUqAMR0iA
 lPJJDA/+IJT4YCRp2TwV2jvIs0QzvXZrzEsxgCLibLE85mYTJgoQBD3W1bH2eyjp
 T/9U0Zh5PGr/84cHd4qiMxzo+5Olz930weG59NcO4RJBSr671aRYs5tJqwaQAZDR
 wlwaob5S28vUmjPxKulvxv6V3FdI79ZE9xrCOCSTQvz4iCLsGOu+Dn/qtF64pImX
 M/EXzPMBrByiQ8RTM4Ege8JoBqiCZPDG9GR3KPXIXQwEeQgIoeYxwRYakxSmSzz8
 W8NduFCbWavg/yHhghHikMiyOZeQzAt+V9k9WjOBTle3TGJegRhvjgI7508q3tXe
 jQTMGATBOPkIgFaZz7eEn/iBa3jZUIIOzDY93RYBmd26aBvwKLOma/Vkg5oGYl0u
 ZK+CMe+/xXl7brQxQ6JNsQhbSTjT+746LvLJlCvPbbPK9R0HeKNhsdKpGY3ugnmz
 VAnOFIAvWUHO7qx+J+EnOo5iiPpcwXZj4AjrwVrs/x5zVhzwQ+4DSU6rbNn0O1Ak
 ELrBqCQkQzh5kqK93jgMHeWQ9EOUp1Lj6PJhTeVnOx2x8tCOi6iTQFFrfdUPlZ6K
 2DajgrFhti4LvwVsohZlzZuKRm5EuwReLRSOn7PU5qoSm5rcouqMkdlYG/viwyhf
 mTVzEfrfemrIQOqWmzPrWEXlMj2mq8oJm4JkC+jJ/+HsfK4UU8I=
 =QCEy
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk

Pull printk updates from Petr Mladek:

 - Allow to print symbolic error names via new %pe modifier.

 - Use pr_warn() instead of the remaining pr_warning() calls. Fix
   formatting of the related lines.

 - Add VSPRINTF entry to MAINTAINERS.

* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
  checkpatch: don't warn about new vsprintf pointer extension '%pe'
  MAINTAINERS: Add VSPRINTF
  tools lib api: Renaming pr_warning to pr_warn
  ASoC: samsung: Use pr_warn instead of pr_warning
  lib: cpu_rmap: Use pr_warn instead of pr_warning
  trace: Use pr_warn instead of pr_warning
  dma-debug: Use pr_warn instead of pr_warning
  vgacon: Use pr_warn instead of pr_warning
  fs: afs: Use pr_warn instead of pr_warning
  sh/intc: Use pr_warn instead of pr_warning
  scsi: Use pr_warn instead of pr_warning
  platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
  platform/x86: asus-laptop: Use pr_warn instead of pr_warning
  platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
  oprofile: Use pr_warn instead of pr_warning
  of: Use pr_warn instead of pr_warning
  macintosh: Use pr_warn instead of pr_warning
  idsn: Use pr_warn instead of pr_warning
  ide: Use pr_warn instead of pr_warning
  crypto: n2: Use pr_warn instead of pr_warning
  ...
2019-11-25 19:40:40 -08:00
Masahiro Yamada 831362fc31 scripts/kallsyms: remove redundant initializers
These are set to zero without the explicit initializers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:07:05 +09:00
Masahiro Yamada d44270fc97 scripts/kallsyms: put check_symbol_range() calls close together
Put the relevant code close together.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:06:49 +09:00
Masahiro Yamada b6233d0ded scripts/kallsyms: make check_symbol_range() void function
There is no more reason to check the return value of
check_symbol_range().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:06:37 +09:00
Masahiro Yamada 887df76de6 scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
Collect the ignored patterns to is_ignored_symbol().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:06:14 +09:00
Masahiro Yamada 97261e1e22 scripts/kallsyms: move more patterns to the ignored_prefixes array
Refactoring for shortening the code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:06:01 +09:00
Masahiro Yamada a41333e06a scripts/kallsyms: skip ignored symbols very early
Unless the address range matters, symbols can be ignored earlier,
which avoids unneeded memory allocation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:04:57 +09:00
Masahiro Yamada 4bfe2b7816 scripts/kallsyms: add const qualifiers where possible
Add 'const' where a function does not write to the pointer dereferenes.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:04:33 +09:00
Masahiro Yamada 2558c138ac scripts/kallsyms: make find_token() return (unsigned char *)
The callers of this function expect (unsigned char *). I do not see
a good reason to make this function return (void *).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:04:11 +09:00
Masahiro Yamada aa91524500 scripts/kallsyms: replace prefix_underscores_count() with strspn()
You can do equivalent things with strspn(). I do not see noticeable
performance difference.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:03:51 +09:00
Masahiro Yamada 29e55ad3d5 scripts/kallsyms: add sym_name() to mitigate cast ugliness
sym_entry::sym is (unsigned char *) instead of (char *) because
kallsyms exploits the MSB for compression, and the characters are
used as the index of token_profit array.

However, it requires casting (unsigned char *) to (char *) in some
places since standard library functions such as strcmp(), strlen()
expect (char *).

Introduce a new helper, sym_name(), which advances the given pointer
by 1 and casts it to (char *).

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:03:33 +09:00
Masahiro Yamada c5e5002f36 scripts/kallsyms: remove unneeded length check for prefix matching
l <= strlen(sym_name) is unnecessary for prefix matching.
strncmp() will do.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:03:18 +09:00
Masahiro Yamada e0109042cc scripts/kallsyms: remove redundant is_arm_mapping_symbol()
Since commit 6f00df24ee ("[PATCH] Strip local symbols from kallsyms"),
all symbols starting '$' are ignored.

is_arm_mapping_symbol() particularly ignores $a, $t, etc. but it is
redundant.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:03:06 +09:00
Masahiro Yamada f34ea02910 scripts/kallsyms: set relative_base more effectively
Currently, record_relative_base() iterates over the entire table to
find the minimum address, but it is not efficient because we sort
the table anyway.

After sort_symbol(), the table is sorted by address. (kallsyms parses
the 'nm -n' output, so the data is already sorted by address, but this
commit does not rely on it.)

Move record_relative_base() after sort_symbols(), and take the first
non-absolute symbol value.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:02:18 +09:00
Masahiro Yamada 5e5c4fa787 scripts/kallsyms: shrink table before sorting it
Currently, build_initial_tok_table() trims unused symbols, but it is
called after sort_symbols().

It is not efficient to sort the huge table that contains unused entries.
Shrink the table before sorting it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:01:14 +09:00
Masahiro Yamada 21915eca08 scripts/kallsyms: fix definitely-lost memory leak
build_initial_tok_table() overwrites unused sym_entry to shrink the
table size. Before the entry is overwritten, table[i].sym must be freed
since it is malloc'ed data.

This fixes the 'definitely lost' report from valgrind. I ran valgrind
against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary:

[Before the fix]

  LEAK SUMMARY:
     definitely lost: 53,184 bytes in 2,874 blocks

[After the fix]

  LEAK SUMMARY:
     definitely lost: 0 bytes in 0 blocks

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 21:00:33 +09:00
Masahiro Yamada 1ef26b7c94 scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
This is not defined in the standard headers. #ifndef is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-25 20:58:35 +09:00
Masahiro Yamada 7ef9ab3b32 modpost: respect the previous export when 'exported twice' is warned
When 'exported twice' is warned, let sym_add_exported() return without
updating the symbol info. This respects the previous export, which is
ordered first in modules.order

This simplifies the code too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 15:46:42 +09:00
Masahiro Yamada e4b26c9f75 modpost: do not set ->preloaded for symbols from Module.symvers
Now that there is no overwrap between symbols from ELF files and
ones from Module.symvers.

So, the 'exported twice' warning should be reported irrespective
of where the symbol in question came from.

The exceptional case is external module; in some cases, we build
an external module to provide a different version/variant of the
corresponding in-kernel module, overriding the same set of exported
symbols.

You can see this use-case in upstream; tools/testing/nvdimm/libnvdimm.ko
replaces drivers/nvdimm/libnvdimm.ko in order to link it against mocked
version of core kernel symbols.

So, let's relax the 'exported twice' warning when building external
modules. The multiple export from external modules is warned only
when the previous one is from vmlinux or itself.

With this refactoring, the ugly preloading goes away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 15:46:42 +09:00
Masahiro Yamada 1743694eb2 modpost: stop symbol preloading for modversion CRC
It is complicated to add mocked-up symbols for pre-handling CRC.
Handle CRC after all the export symbols in the relevant module
are registered.

Call handle_modversion() after the handle_symbol() iteration.

In some cases, I see atand-alone __crc_* without __ksymtab_*.
For example, ARCH=arm allyesconfig produces __crc_ccitt_veneer and
__crc_itu_t_veneer. I guess they come from crc_ccitt, crc_itu_t,
respectively. Since __*_veneer are auto-generated symbols, just
ignore them.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 15:46:38 +09:00
Masahiro Yamada 9bd2a099d7 modpost: rename handle_modversions() to handle_symbol()
This function handles not only modversions, but also unresolved
symbols, export symbols, etc.

Rename it to a more proper function name.

While I was here, I also added the 'const' qualifier to *sym.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 12:44:24 +09:00
Masahiro Yamada e84f9fbbec modpost: refactor namespace_from_kstrtabns() to not hard-code section name
Currently, namespace_from_kstrtabns() relies on the fact that
namespace strings are recorded in the __ksymtab_strings section.
Actually, it is coded in include/linux/export.h, but modpost does
not need to hard-code the section name.

Elf_Sym::st_shndx holds the index of the relevant section. Using it is
a more portable way to get the namespace string.

Make namespace_from_kstrtabns() simply call sym_get_data(), and delete
the info->ksymtab_strings .

While I was here, I added more 'const' qualifiers to pointers.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 12:44:24 +09:00
Masahiro Yamada afa0459daa modpost: add a helper to get data pointed by a symbol
When CONFIG_MODULE_REL_CRCS is enabled, the value of __crc_* is not
an absolute value, but the address to the CRC data embedded in the
.rodata section.

Getting the data pointed by the symbol value is somewhat complex.
Split it out into a new helper, sym_get_data().

I will reuse it to refactor namespace_from_kstrtabns() in the next
commit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-23 12:44:24 +09:00
Kees Cook 51e46c7a40 docs, parallelism: Rearrange how jobserver reservations are made
Rasmus correctly observed that the existing jobserver reservation only
worked if no other build targets were specified. The correct approach
is to hold the jobserver slots until sphinx has finished. To fix this,
the following changes are made:

- refactor (and rename) scripts/jobserver-exec to set an environment
  variable for the maximally reserved jobserver slots and exec a
  child, to release the slots on exit.

- create Documentation/scripts/parallel-wrapper.sh which examines both
  $PARALLELISM and the detected "-jauto" logic from Documentation/Makefile
  to decide sphinx's final -j argument.

- chain these together in Documentation/Makefile

Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/eb25959a-9ec4-3530-2031-d9d716b40b20@rasmusvillemoes.dk
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191121205929.40371-4-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-22 10:35:18 -07:00
Kees Cook dffd011480 docs, parallelism: Do not leak blocking mode to other readers
Setting non-blocking via a local copy of the jobserver file descriptor
is safer than just assuming other reader processes with the same fd open
are prepared for it to be non-blocking.

Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/44c01043-ab24-b4de-6544-e8efd153e27a@rasmusvillemoes.dk
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191121205929.40371-3-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-22 10:35:14 -07:00
Kees Cook 4920323cff docs, parallelism: Fix failure path and add comment
Rasmus noted that the failure path didn't correctly exit. Fix this and
add another comment about GNU Make's job server environment variable
names over time.

Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/eb25959a-9ec4-3530-2031-d9d716b40b20@rasmusvillemoes.dk
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20191121205929.40371-2-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-11-22 10:35:11 -07:00
David S. Miller 19b7e21c55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Lots of overlapping changes and parallel additions, stuff
like that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16 21:51:42 -08:00
Linus Torvalds eb70e26cd7 arm64 fix for -rc8 / final
- Handle CC variables containing quotes in tools-support-relr.sh script
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl3OiRAACgkQt6xw3ITB
 YzQMhwgAgZl+QQPLhEMLQHvqaDtLb3l08vPPrLCDWHon5IaHMz1HCGB+/5CMaCG5
 9X9tEiy2xg5X9aHSyI7T7qmjqUGkXTKn1OzeSNxHJh8IUsvFN30UKm2lEewoRq1V
 WR8HfC/h1Ff+b2502/gg96KZxWBnzbN2XmZ3cEtLCHsj8OrRq6mFeqMxgnD8xE3D
 DceJ3v48ziYV2LUOM8/ZLJ8CzwWcSiNYIqJghjgbC2q83+czxne6KRGwx/4muWaX
 OpMa5tvbeVirMOThr3BGpuDe/JTkygVXFfw7jS/mNbV6ALwf9E8neinnoTFNp7Tq
 7tpBkRHxB3vB6tLnnBJIjNfl1KbaJA==
 =YqcT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fix from Will Deacon:
 "One trivial fix for -rc8/final that ensures that the script used to
  detect RELR relocation support in the toolchain works correctly when
  $CC contains quotes. Although it fails safely (by failing to detect
  the support when it exists), it would be nice to have this fixed in
  5.4 given that it was only introduced in the last merge window.

  Summary:

   - Handle CC variables containing quotes in tools-support-relr.sh
     script"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  scripts/tools-support-relr.sh: un-quote variables
2019-11-15 09:14:23 -08:00
Masahiro Yamada 7ecaf069da kbuild: move headers_check rule to usr/include/Makefile
Currently, some sanity checks for uapi headers are done by
scripts/headers_check.pl, which is wired up to the 'headers_check'
target in the top Makefile.

It is true compiling headers has better test coverage, but there
are still several headers excluded from the compile test. I like
to keep headers_check.pl for a while, but we can delete a lot of
code by moving the build rule to usr/include/Makefile.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15 00:23:10 +09:00
Masahiro Yamada fcbb8461fd kbuild: remove header compile test
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.

The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)

I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15 00:22:35 +09:00
Uwe Kleine-König 1d28122131 checkpatch: don't warn about new vsprintf pointer extension '%pe'
This extension was introduced in commit 57f5677e53 ("printf: add
support for printing symbolic error names").

Link: http://lkml.kernel.org/r/20191114100416.23928-1-u.kleine-koenig@pengutronix.de
To: Andy Whitcroft <apw@canonical.com>
To: Joe Perches <joe@perches.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[pmladek@suse.com: Switched the ordering: eE -> Ee]
Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-11-14 14:53:53 +01:00
Ilie Halip 65e1f38d9a scripts/tools-support-relr.sh: un-quote variables
When the CC variable contains quotes, e.g. when using
ccache (make CC="ccache <compiler>"), this script always
fails, so CONFIG_RELR is never enabled, even when the
toolchain supports this feature. Removing the /dev/null
redirect and invoking the script manually shows the issue:

    $ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh
    ./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found

Fix this by un-quoting the variables.

Before:
    $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
        NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
    $ grep RELR .config
    CONFIG_ARCH_HAS_RELR=y

With this change:
    $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
        NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
    $ grep RELR .config
    CONFIG_TOOLS_SUPPORT_RELR=y
    CONFIG_ARCH_HAS_RELR=y
    CONFIG_RELR=y

Fixes: 5cf896fb6b ("arm64: Add support for relocating the kernel with RELR relocations")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/769
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-11-13 10:52:05 +00:00
Masahiro Yamada eba19032f9 kbuild: rename any-prereq to newer-prereqs
GNU Make manual says:

  $?
      The names of all the prerequisites that are newer than the target,
      with spaces between them.

To reflect this, rename any-prereq to newer-prereqs, which is clearer
and more intuitive.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11 20:10:01 +09:00
Masahiro Yamada 2d3b1b8f0d kbuild: drop $(wildcard $^) check in if_changed* for faster rebuild
The incremental build of Linux kernel is pretty slow when lots of
objects are compiled. The rebuild of allmodconfig may take a few
minutes even when none of the objects needs to be rebuilt.

The time-consuming part in the incremental build is the evaluation of
if_changed* macros since they are used in the recipes to compile C and
assembly source files into objects.

I notice the following code in if_changed* is expensive:

  $(filter-out $(PHONY) $(wildcard $^),$^)

In the incremental build, every object has its .*.cmd file, which
contains the auto-generated list of included headers. So, $^ are
expanded into the long list of the source file + included headers,
and $(wildcard $^) checks whether they exist.

It may not be clear why this check exists there.

Here is the record of my research.

[1] The first code addition into Kbuild

This code dates back to 2002. It is the pre-git era. So, I copy-pasted
it from the historical git tree.

| commit 4a6db0791528c220655b063cf13fefc8470dbfee (HEAD)
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date:   Mon Jun 17 00:22:37 2002 -0500
|
|     kbuild: Handle removed headers
|
|     New and old way to handle dependencies would choke when a file
|     #include'd by other files was removed, since the dependency on it was
|     still recorded, but since it was gone, make has no idea what to do about
|     it (and would complain with "No rule to make <file> ...")
|
|     We now add targets for all the previously included files, so make will
|     just ignore them if they disappear.
|
| diff --git a/Rules.make b/Rules.make
| index 6ef827d3df39..7db5301ea7db 100644
| --- a/Rules.make
| +++ b/Rules.make
| @@ -446,7 +446,7 @@ if_changed = $(if $(strip $? \
|  # execute the command and also postprocess generated .d dependencies
|  # file
|
| -if_changed_dep = $(if $(strip $? \
| +if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
|                           $(filter-out $(cmd_$(1)),$(cmd_$@))\
|                           $(filter-out $(cmd_$@),$(cmd_$(1)))),\
|         @set -e; \
| diff --git a/scripts/fixdep.c b/scripts/fixdep.c
| index b5d7bee8efc7..db45bd1888c0 100644
| --- a/scripts/fixdep.c
| +++ b/scripts/fixdep.c
| @@ -292,7 +292,7 @@ void parse_dep_file(void *map, size_t len)
|                 exit(1);
|         }
|         memcpy(s, m, p-m); s[p-m] = 0;
| -       printf("%s: \\\n", target);
| +       printf("deps_%s := \\\n", target);
|         m = p+1;
|
|         clear_config();
| @@ -314,7 +314,8 @@ void parse_dep_file(void *map, size_t len)
|                 }
|                 m = p + 1;
|         }
| -       printf("\n");
| +       printf("\n%s: $(deps_%s)\n\n", target, target);
| +       printf("$(deps_%s):\n", target);
|  }
|
|  void print_deps(void)

The "No rule to make <file> ..." error can be solved by passing -MP to
the compiler, but I think the detection of header removal is a good
feature. When a header is removed, all source files that previously
included it should be re-compiled. This makes sure we has correctly
got rid of #include directives of it.

This is also related with the behavior of $?. The GNU Make manual says:

  $?
      The names of all the prerequisites that are newer than the target,
      with spaces between them.

This does not explain whether a non-existent prerequisite is considered
to be newer than the target.

At this point of time, GNU Make 3.7x was used, where the $? did not
include non-existent prerequisites. Therefore,

  $(filter-out FORCE $(wildcard $^),$^)

was useful to detect the header removal, and to rebuild the related
objects if it is the case.

[2] Change of $? behavior

Later, the behavior of $? was changed (fixed) to include prerequisites
that did not exist.

First, GNU Make commit 64e16d6c00a5 ("Various changes getting ready for
the release of 3.81.") changed it, but in the release test of 3.81, it
turned out to break the kernel build.

See these:

 - http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html
 - https://savannah.gnu.org/bugs/?16002
 - https://savannah.gnu.org/bugs/?16051

Then, GNU Make commit 6d8d9b74d9c5 ("Numerous updates to tests for
issues found on Cygwin and Windows.") reverted it for the 3.81 release
to give Linux kernel time to adjust to the new behavior.

After the 3.81 release, GNU Make commit 7595f38f62af ("Fixed a number
of documentation bugs, plus some build/install issues:") re-added it.

[3] Adjustment to the new $? behavior on Kbuild side

Meanwhile, the kernel build was changed by commit 4f1933620f ("kbuild:
change kbuild to not rely on incorrect GNU make behavior") to adjust to
the new $? behavior.

[4] GNU Make 3.82 released in 2010

GNU Make 3.82 was the first release that integrated the correct $?
behavior. At this point, Kbuild dealt with GNU Make versions with
different $? behaviors.

 3.81 or older:
    $? does not contain any non-existent prerequisite.
    $(filter-out $(PHONY) $(wildcard $^),$^) was useful to detect
    removed include headers.

 3.82 or newer:
    $? contains non-existent prerequisites. When a header is removed,
    it appears in $?. $(filter-out $(PHONY) $(wildcard $^),$^) became
    a redundant check.

With the correct $? behavior, we could have dropped the expensive
check for 3.82 or later, but we did not. (Maybe nobody noticed this
optimization.)

[5] The .SECONDARY special target trips up $?

Some time later, I noticed $? did not work as expected under some
circumstances. As above, $? should contain non-existent prerequisites,
but the ones specified as SECONDARY do not appear in $?.

I asked this in GNU Make ML, and it seems a bug:

  https://lists.gnu.org/archive/html/bug-make/2019-01/msg00001.html

Since commit 8e9b61b293 ("kbuild: move .SECONDARY special target to
Kbuild.include"), all files, including headers listed in .*.cmd files,
are treated as secondary.

So, we are back into the incorrect $? behavior.

If we Kbuild want to react to the header removal, we need to keep
$(filter-out $(PHONY) $(wildcard $^),$^) but this makes the rebuild
so slow.

[Summary]

 - I believe noticing the header removal and recompiling related objects
   is a nice feature for the build system.

 - If $? worked correctly, $(filter-out $(PHONY),$?) would be enough
   to detect the header removal.

 - Currently, $? does not work correctly when used with .SECONDARY,
   and Kbuild is hit by this bug.

 - I filed a bug report for this, but not fixed yet as of writing.

 - Currently, the header removal is detected by the following expensive
   code:

    $(filter-out $(PHONY) $(wildcard $^),$^)

 - I do not want to revert commit 8e9b61b293 ("kbuild: move
   .SECONDARY special target to Kbuild.include"). Specifying
   .SECONDARY globally is clean, and it matches to the Kbuild policy.

This commit proactively removes the expensive check since it makes the
incremental build faster. A downside is Kbuild will no longer be able
to notice the header removal.

You can confirm it by the full-build followed by a header removal, and
then re-build.

  $ make defconfig all
    [ full build ]
  $ rm include/linux/device.h
  $ make
    CALL    scripts/checksyscalls.sh
    CALL    scripts/atomic/check-atomics.sh
    DESCEND  objtool
    CHK     include/generated/compile.h
  Kernel: arch/x86/boot/bzImage is ready  (#11)
    Building modules, stage 2.
    MODPOST 12 modules

Previously, Kbuild noticed a missing header and emits a build error.
Now, Kbuild is fine with it. This is an unusual corner-case, not a big
deal. Once the $? bug is fixed in GNU Make, everything will work fine.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11 20:10:01 +09:00
Masahiro Yamada 76b54cf033 modpost: remove unneeded local variable in contains_namespace()
The local variable, ns_entry, is unneeded.

While I was here, I also cleaned up the comparison with NULL or 0.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
2019-11-11 20:10:01 +09:00
Masahiro Yamada bc35d4bda2 scripts/nsdeps: support nsdeps for external module builds
scripts/nsdeps is written to take care of only in-tree modules.
Perhaps, this is not a bug, but just a design. At least,
Documentation/core-api/symbol-namespaces.rst focuses on in-tree modules.

Having said that, some people already tried nsdeps for external modules.
So, it would be nice to support it.

Reported-by: Steve French <smfrench@gmail.com>
Reported-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11 20:10:01 +09:00
Masahiro Yamada bbc55bded4 modpost: dump missing namespaces into a single modules.nsdeps file
The modpost, with the -d option given, generates per-module .ns_deps
files.

Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.

On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.

This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:

  <module_name>: <list of missing namespaces>

Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.

This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.

This also solves the stale .ns_deps problem reported by Jessica Yu:

  https://lkml.org/lkml/2019/10/28/467

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11 20:10:01 +09:00